Sisällysluettelo. Kokoluokat (pienimmästä suurimpaan)
|
|
|
- Prosper Fletcher
- 5 years ago
- Views:
Transcription
1 RI-rullajohteet
2 Sisällysluettelo Kokoluokat (pienimmästä suurimpaan) L 0 mm...s. Kelkkakoko ja kuormitusarvot...s. L mm...s. Kelkkakoko ja kuormitusarvot...s. Kelkkakoko ja kuormitusarvot...s. P mm...s. Kelkkakoko ja kuormitusarvot...s. Kelkkakoko ja kuormitusarvot...s. P 0 mm...s. 9 Kelkkakoko ja kuormitusarvot... s. 0 Kelkkakoko ja kuormitusarvot... s. Johdekiskojen porausmitat... s.
3 0 L RRIR N WORKS IN HORIZONTL N VRTIL POSITION (MX LO KG) 0 RINGS,90,0,0,0,0 N PILOT HOLS OR M THR 00/000 (MX LNGTH 00) M OUNTRSUNK (WITH STP O 0 mm),0 = = IRST HOL = = M IXING HOLS M RRIR PLT LUMINIUM PROIL (NOIZ) ROM 00 TO 000 N SUPPLI LRY RILL (UPON RQUST) OR PROIL LONGR THN 000 (MX LNGTH 00 mm) SUPPLI ONLY WITHOUT HOLS 0 0
4 0 0 TIL SL : SLIRS "S" STRSS / Nz [N] 9 Ny [N] Mx [Nmm] My [Nmm] Mz [Nmm] 90 SL :
5 L -nodized aluminium section standard (alloy 00a) -Length profile upon request (Maximum 00 mm) -rilling upon request -Sliders are supplied factory fitted with a slight pre-load -Plate different to standard upon request -Rails are supplied undrilled as standard -Load ratings are per carrier and can be increased accordingly luminium slider with bearings (Max.Load 9 KG.) Unique plated steel bearings or optional elrin for non-corrosion and weight reduction 0 rilling plate details N. HOLS M 09. luminium slider with bearings (Max.Load KG.). nodized aluminium profile Lengths & rilling upon request Maximum 00 mm rilling upon request N. HOLS M. STION (Scale :)
6 0 SLIRS "L" WITH RINGS STRSS STL WHL LRIN WHL 0 TIL Nz [N].9. Ny [N]. Mx [Nmm] My [Nmm] Mz [Nmm] SL :
7 0 TIL SLIRS "L" WITH RINGS STRSS STL WHL LRIN WHL Nz [N] 9 Ny [N] Mx [Nmm] My [Nmm] 0 Mz [Nmm] 0 90 SL :
8 P -nodized aluminium section standard (alloy 00a) -Length profile upon request (Maximum 00 mm) -rilling upon request -Sliders are supplied factory fitted with a slight pre-load -Plate different to standard upon request -Rails are supplied undrilled as standard -Load ratings are per carrier and can be increased accordingly luminium slider with bearings (Max.Load KG.) Unique plated steel bearings or optional elrin for non-corrosion and weight reduction 00,0 = =,0 rilling plate details luminium slider with bearings (Max.Load 0 KG.) nodized aluminium profile Lengths & rilling upon request Maximum 00 mm rilling upon request 0,0 N. HOLS M 0,0,0,0,0,0 0 N. HOLS M STION (Scale :)
9 0 00 TIL SLIRS "P" WITH RINGS STRSS STL WHL LRIN WHL Nz [N] 9 Ny [N] Mx [Nmm] My [Nmm] 0 Mz [Nmm] 00 0 SL :
10 0 TIL SLIRS "P" WITH RINGS STRSS STL WHL LRIN WHL Nz [N] 9 Ny [N] Mx [Nmm] My [Nmm] 0 Mz [Nmm] 0 00 SL :
11 -nodized aluminium section standard (alloy 00a) -Length profile upon request (Maximum 00 mm) -rilling upon request -Sliders are supplied factory fitted with a slight pre-load RIL "P" P -Plate different to standard upon request -Rails are supplied undrilled as standard -Load ratings are per carrier and can be increased accordingly luminium slider with bearings (Max.Load KG.) Unique plated steel bearings 0 0 rilling plates details 0 luminium slider with bearings (Max.Load 0 KG.) Unique plated steel bearings.. nodized aluminium profile Lengths & rilling upon request Maximum 00 mm rilling upon request N. HOLS M N. HOLS M 9 STION (Scale :)
![0 SLIRS "P" WITH RINGS STRSS STL WHL Nz [N]](/docs-images/88/117873358/images/12-0.jpg "90 Ny [N] Mx [Nmm] My [Nmm] Mz [Nmm] 900 0")
12 0 SLIRS "P" WITH RINGS STRSS STL WHL Nz [N] 90 Ny [N] Mx [Nmm] My [Nmm] Mz [Nmm] TIL
13 0 0 TIL SL : SLIRS "P" WITH RINGS STRSS STL WHL Nz [N] Ny [N] 9 Mx [Nmm] 9 My [Nmm] 09 MZ [Nmm] 0
14 Johdekiskojen porausmitat L Ruuvi M P Ruuvi M P Ruuvi M
BELT CONVEYOR SECTION CONTENT. Bolt-Together Straight Bolt-Together Incline/Decline Welded Straight Belt Curve Optional Equipment and Devices
LT ONVYOR STION ONTNT olt-together Straight olt-together Incline/ecline Welded Straight elt urve Optional quipment and evices 15 LT ONVYOR WHY? Provides the most versatile means of handling a wide variety
SECTION C-C SCALE 1 / 2 SECTION E-E SECTION AT-AT SCALE 1 / 2 SCALE 1 / 2 SECTION F-F SCALE 1 / 2 SECTION M-M SCALE 1 / 2 DETAIL D SCALE 2 : 1
RVIS PRT SRIPTION IN OM, TO MK - //0 Y.LI IT LRR 6 dded fillet at bottom of PM pocket in item. //0 TIO 4. R. dded a new part # //0 Y.LI T 4 (.7) Revised welding note at etail View /6/0 Y.LI WTR TIGHT Ø6.7
Hinges. Various hinges. Stainless steel hinge with removable pin. Removable pin hinges with nylon washers. Removable pin.
Stainless steel hinge with removable pin Removable pin. Part number Material Finish Weight (g) 52-1-3877 304 stainless steel gloss 60 94.5 1.5 4 50 ø 6 ø 5 20 42 10 45 () 74.5 5.5 Removable pin hinges
CUSTOMER COPY PCB LAYOUT RECOMMENDED E D B .075[1.90] SEE NOTE 13 2X THRU C INSERTION DEPTH
![CUSTOMER COPY PCB LAYOUT RECOMMENDED E D B .075[1.90] SEE NOTE 13 2X THRU C INSERTION DEPTH](/thumbs/90/102011165.jpg "CUSTOMER COPY PCB LAYOUT RECOMMENDED E D B .075[1.90] SEE NOTE 13 2X THRU C INSERTION DEPTH")
RVISIONS RV. O. NO SRIPTION T Y ST KY IN POSITION & KY TWN POSITION OPTION, OSOLT WG 0(S99), (S), 0(S), (S00), 09(S, UPLIT WITH S99), 0(S00), 9(S), 9(S), 00(S), (S0), RPL WITH WG 0, POSITION OR MTG & POSI
MATERIAL SPECIFICATIONS STYLE PG THREE-HOLE RECTANGULAR STYLE PG STYLE PG THREE-HOLE RECTANGULAR
ROMC HRNSS S HRNSS : STM 36 Steel, profile shape cut with plasma arc or oxy-fuel. Holes plasma arc cut or drilled. Stainless steel optional. TI-S: ll Thread Rod. lloy steel per STM 193 Grade 7. Stainless
0.90 ±0.05 HOUSING (2X) C L OF PAD XX ±
SOLIWORKS GNRT RWING, O NOT HNG Y HN L OF ONNTOR 1.00 1.45 0.02 TYP. MTL P MTL SPRING 4.0.50 TYP. ONTT 2.0 (2X).2 4. 0.90 HOUSING 1 1.9 (2X) NOTS: -1-001.S Li 1. LTRIL HRTRISTIS: 1.1. ONTT URRNT RTING:
hat channel purlins B SCREW PATTERNS: DOUBLE SCREW PATTERN ON UPPER AND LOWER ROOF PURLINS (FOR ROOF PANELS).
6.2.524.524.524.524.524.524.524.524.524.524.524.524.524.524.524 3.2 +3.920 +3.094 note: dimensions including sheet metal transparent polymer panels, glass fiber enforced roof metal panel +3.920 +3.094
COVER & SHEET INDEX. Pico-Union Mixed-Use Project 1659 W 11th St, Los Angeles, CA ARCH 405aL FALL 2015 NICK HALSEY SHEET INDEX
NO. TITL INX RH 405aL LL 205 Pico-Union Mixed-Use Project 659 W th St, Los ngeles, 9005 60 OVR & INX 602 PROGRM UL IGRM 603 STRUTURL LULTIONS (GRVITY) 604 STRUTURL LULTIONS (WIN) 605 LVL 2 STRUTURL RMING
Contents - Sliding Track
ontents - Sliding Track SLIING TRK Track Series 120 2 Track Series 200 2 Track Series 450 2 Track Series 650 2 HNGRS 2 Wheel Hangers 2 4 Wheel Hangers 2 SLIING OOR HRWR Top Plate ssembly 3 SI FIX RKTS
Supply and exhaust ventilation of various premises. Formation of flat air ductworks.
Flt ut Applition Supply n xhust vntiltion o vrious prmiss. Formtion o lt ir utworks. M o whit PVC. Siz: 55x110, 60x122, 60x204 mm. ut lngth rom 350 to 2500 mm. Connt with mthing onntors. 1 1 50035 55 110
CAM INDEX PAGE DATE DESCRIPTION
CM INX 8/24/7 PG T SCRIPTION C-1 8/24/7 Cam Index C-2 6/27/7 erial Cam Specifications C-3 3/23/4 erial Cam Specifications C-4 6/9/4 Standard erial Cam nvelope C-5 8/24/7 Performance Calculation, ie Mount
ORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
Section VIII Hydraulic Tooling
Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS
Keymatic Line of Locks
Volume 5 a t a l o g enstan L O O M P N Y eymatic Line of Locks 2 S V X Introduction 1 am Locks 2 3 rawer/oor Locks 4 Gang Locks 5 Snap olt Lock 6 s 7 8 9 10 11 Z olt Locks 12 Ratchet Locks 13 eys 14 enstan
A FORMAT: Met-lega-master-tb-prod-A3 REVISION: C DATE: 2017/02/06
RL WITH OMPON UL SHT(S) (QTY. VRIL) LL PRT NO. QTY. O TP PRTS ORINTTION RFR TO SHT RO LL NO. OF RLS WITH M G (QTY. VRIL) RL WITH OMPON NTR UL SHT(S) (QTY. VRIL) 0.0 MOSS TP RO LL NO. OF RLS WITH M G (QTY.
SPIRAL STAIR INSTALLATION GUIDE. Salter -Wood Tread Covers -Continuous Sleeve -Aluminum Handrail -Primed or Powdercoated
29 SPIRAL STAIR INSTALLATION GUI Salter -Wood Tread Covers -Continuous Sleeve -Aluminum Handrail -Primed or Powdercoated PARTS 1 2 3 BASPLAT BOTTOM BALUSTR MAIN BALUSTR 4 5 6 CNTR BALUSTR CNTR COLUMN TRA
ES100 plus. 550mm WIDTH. 813mm BASE LENGTH. 933mm SLIDE TRAVEL LOWERS. 290mm. 738mm TRAY LENGTH. 390mm TRAY WIDTH
LOWRS 290mm 1 2 550mm WITH 9mm SLI TRVL 81mm S LNGTH 90mm TRY WITH 78mm TRY LNGTH UNLSS OTHRWIS SPII: IMNSIONS R IN MILLIMTRS SUR TOLRNS LINR: NGULR: SIGN IL LOT: :\Users\learview\ocuments\SY SLI\V-S79
Section 13 Bosch EcoSlide Linear Sliding Carriages and Bearings
coslide Linear Sliding arriages and earings 1 Section osch coslide Linear Sliding arriages and earings The new osch coslides, along with the new slider bearings and the profile slider, provide an inexpensive
Preliminary BLUEBOTTLE 3 PTY LTD TOUR DRAFT
2 3 4 5 6 7 8 9 0 2 LN OLOUR QUIPMNT LIST VI TYP UNITS QUIPMNT MOUNTIN WTT MX NNLS RM SIZ WIT Light 2 SLON PL3 0 2 0 Light 2 PINSPOT 300 2 2 Light 3 UN ROUP 540 3 0 Light 4 PR 64 ML 200 4.2 Light 7 MR
EXHAUST SYSTEM MANIFOLD AND ELBOWS 7 B
EXHAUST SYSTEM 72990 MANIFOLD AND ELBOWS 72991 7 B Tl o Contnts P Torqu Spiitions..................... 7B-1 Slnts................................ 7B-1 Rmovl................................ 7B-1 Clnin n
Base-Line. DC, C Systems
DC, C Systems DC system DC system is based on rails, guide rollers and carriages that provide a complete guiding system. Rails and rollers can be used as single elements. In most cases the application
Kenstan. Volume 5. Knob Line of Locks. Introduction. Cam Locks. Drawer/Door Locks. Snap Bolt Lock. Plunger Lock PL40.
Volume 5 a t a l o g L O K O M P N Y of Locks 2 S V Introduction 1 am Locks 2 3 rawer/oor Locks 4 Snap olt Lock 5 PL40 6 PL45 7 PL50 8 L O K O M P N Y List and ata Sheet Introduction 1 of Locks Standard
AD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
GRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
MIT CENTER FOR TRANSPORTATION & LOGISTICS April - October 2017
MIT NTR OR TRNSPORTTION & LOGISTIS pril - October 2017 1 2 3 4 5 6 7 8 9 10 11 12 13 6 10.01 ONSTRUTION SS MIL ROOM 000M OORINT TH US O STIR TOWR WITH MIT SURITY 08.03 9 10.01 01 STORG 000ST VSTIUL 000SV
HARDWARE WIRE BALUSTRADING FITTINGS MARINE AND ARCHITECTURAL.
MRIN N RHITTURL HRWR WIR LUSTRING FITTINGS OPYRIGHT Y JMS GLN PTY LT *OL: Normal stocked items, ITLI: Please contact our sales team for availabilty and price 1 WIR LUSTRING FITTINGS STINLSS MRIN & RHITTUR
Transport anchor system. Lifting Socket. Flat Lifting Socket. Short Anchor
Transport anchor systm W provi a complt Transport anchor systm, from various Transport Anchors, lifting vics to plastic accssoris as wll as Tchnical support. Casting in th anchors into th concrt with avanc
RODLESS GANTRY RAIL PNEUMATIC SLIDE
ROLSS GNTRY RIL PNUMTI SLI Major enefits Space-saving design Smooth, precise movement High load capacity with very low deflection Improved moment capacity Two bore sizes offered ( and mm) Long travel lengths
Aluminium Air Pipe. Aluminium Nitrogen Pipe. Aluminium Vacuum Pipe
ININITY PIP & ITTINGS PIPING SYSTMS & ITTINGS Technical haracteristics Pertinent To The Tubes luminium ir Pipe T MX OW RT (M) (M, @7R) INXM 90000 luminium Pipe mm x m INXM 90000 luminium Pipe mm x m 14
SLIDING DOORS SYSTEMS
SLIDING DOORS SYSTEMS COPLANAR SYSTEM FOR CABINET REVERSIBLE SYSTEM Load capacity up to 25kg for one door tested by Catas. Door thickness up to 40mm. Soft closing and soft opening. Cuttable in every customized
Natal Iron and Brass Foundry cc Reg. No. 1987/018590/83
Ntl Iron n Brss Founry Rg. No. 1987/018590/83 Hyworth Ro M Konni Pitrmritzurg P.O. Box 221 Luxmi 37 033-386 6572 / 3 / 6 Fx: 033-386 7001 -mil:ni@mw.o.z Founrs in Frrous n Non Frrous Mtls n Pttrn Mkrs
K17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
13173 INSTALLATION INSTRUCTIONS
INSTLLTION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. INCLUS luetc, YRS: 0 MK: MRCS-NZ MOL: GL50 STYL: SUV XCLUS ctive Curve Sys. WRNING: NVR XC YOUR VHICL MNUFCTURR'S
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
EXHAUST SYSTEMS RISERS
EXHAUST SYSTEMS 7 70621 70481 B RISERS Tl o Contnts Pg Spiitions............................ 7B-1 4.3L/4.3LX............................ 7B-1 Torqu Spiitions................ 7B-1 Slnts...........................
PRODUCT INDEX FLOORING HANDRAILING STAIRTREADS MISCELLANEOUS
FLOORING PROUT INX LUMINIUM TR PLT 7 URR STL FLOOR PLT 7 XPN MTL WLKWY MSH 5 GLSS FIR FLOORING N FLOOR PLT 8, 9 GRTING 5 OPN STL FLOORING 4 RHINO FLOORING PLNKS 6, 7 SF LO TLS 19 STINLSS STL TR PLT 7 HNRILING
DOUBLE ENVELOPING WORM GEAR SETS
OUL NVLOPIN WORM R STS 172 one rive Product atalog and ngineering Manual ouble nveloping Worm ears & Speed Reducers ontents one rive ear Sets...173 one rive ear Sets - Tables of acklash... 174 one rive
highlights Double tube linear actuators
highlights GN 491 with right or left hand thread, single slider 3 Type R1 Right hand thread, single shaft end R2* Right hand thread, two shaft ends L1* Left hand thread, single shaft end L2* Left hand
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the
Linear Guides Series OSP-P
Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing
V Mesh Fencing DO NOT SCALE DRAWINGS firstfence.co.uk
0283 52 0283 480 522 sales@firstfence.co.uk firstfence.co.uk V Mesh encing MM X M PROIL NING PNLS OVRVIW 800MM HIGH V MSH NING 0MM HIGH V MSH NING 20MM HIGH V MSH NING MM HIGH V MSH NING O NOT SL RWINGS
RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
Model GOM. G-O-Motor Spring or Spring-less Type Piston Cylinder Actuator OVERVIEW SPECIFICATIONS. No. SS (Rev.
No. SS2-8210-0200 (Rv.6) G-O-Motor Sprin or Sprin-lss Typ iston Cylindr ctutor Modl GOM OVRVIW Th G-O-Motor is pnumtic ctutor tht turs compct in siz, powrul in output nd lon stro. G-O-Motors hv wid rn
DRAWING APPROVAL SHEET
O S.J. RWING PPROVL SHT RWING NUMR: MMRO--0-M-0 RWING TITL:Passenger Seats Layout ISSU T OMPIL Y HK Y STRSS Y V/PPROV 0/0/0 Gytis Leonavicius rawford Murray rawford Murray rawford Murray The drawing referenced
NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
CAUTION: Do not install damaged parts!!!
Your satisfaction is important to us, plas lt us hlp! If you hav any qustions or concrns during th installation, our support rprsntativs ar availabl to assist you. Plas call: 1-877-769-3765 or Liv Chat
M/46800/M, M/46800/HM, M/46800/PM
External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance
LAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
MX MXA ALUMINIUM MOBILE ENCLOSURE APPLICATON EXAMPLE. DESKTOP AUDIO PREAMPLIFIER with USB WIRELESS MICROPHONE SYSTEM MODEL RAILROAD CONTROLLER
MX MX Th MX mobil nlosur is dsignd with a bautiful and lgant finish in mind. ith its taprd panl dgs and roundd dsign, it fits omfortably in your hand, whil giving off a simpl yt slk look. Suitabl for us
Page
Tecnoinanles Page 68 69 69 70 70 71 72 72 72 www.tecnoin.com 1 1 5 3 S O I D N D E W I T T R E D E D I N S E R T S Coe c t Color 115312301 124 109 ± 1 M6 45 21 10 Black 115314301 148 132 ± 1 M8 54 24 14
Linear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Page Overview 101-102 Plain Bearing SLIDELINE 103-104 Roller Guide POWERSLIDE 105-108 Aluminium Roller Guide PROLINE 109-111 Heavy-duty guide HD 113-115
CP series INCLINED LIQUID COLUMN MANOMETERS
CP sris INCLINED LIQUID COLUMN MANOMETERS Prssur / Dprssion KEY POINTS Th CP 25 inlin liqui olumn mnomtr, vlop n mnuftur y KIMO msurs slight vritions in prssur, prssion or iffrntil prssur of ir or gs.
MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.
MSR SERIES Technicl dt Protection clss IP40 MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our website. Avilble rnge W-30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce for sophisticted
13117 INSTALLATION INSTRUCTIONS
INSTLLTION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. INCLUING luetc, YRS: 0-PRSNT MK: MRCS-NZ MOL: ML50 XCLUING ctive Curve System STYL: SUV WRNING: NVR XC
Matic TM. Data sheet Sheet No.: Rev. A EL-O-MATIC ACTUATORS WITH ASCO SOLENOID VALVES Date: November /2 NC 5/2
ata sheet Sheet No.:.06. Rev. -O-MTI TUTORS WITH SO SOLNOI VLVS ate: November 009 Selector plate for / - / function lectrical entry Pg 9 8 ir entry G/" Speed control (optional) 7 Speed control (optional)
MTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
VICTOR SNAP ON STEEL CLAMPS FOR HEAVY WALL CONDUIT (RIGID)
SNAP ON STL CLAMPS FOR HAVY WALL (RIGID) (RIGID) STANDARD SRIS -S 1.062 9/16 0 15 11-S 1.062 9/16 0 19 12-S 1.062 25 2 013-S 1.062 30 14-S 1.062 22 1 015-S 1.093 4 50 41 1 16-S 1.093 4 50 250 25 HAVY SRIS
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
2450 LSC CABIN FEATURES
2450 LS IN TURS NTR V-RTH K-RST UM06 PORT V-RTH USHION UM06 STROR V-RTH USHION UM06 PORT V-RTH KRST UM06 V-RTH ILLR USHION UM06Q STROR V-RTH W KRST UM06 ILLR USHION SUPPORT (NS) UM18 ILLR USHION SUPPORT
RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)
LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35
124
124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
TEPHEN TEPHEN LUBRICATION LUBRICATION SYSTEMS
LURITION SYSTMS LURITION LURITORS N OILRS LURITION QUIPMNT PROUT RNG rip Feed Lubricators range of gravity and forced feed oilers for lubricating single or multiple points and for use in conjunction with
Linear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
CAPPINGS & COPINGS. CAPLOCK the Locking Capping and Coping System
PLOK the Locking apping and oping System Ibstock manufactures aplock, the unique patented locking capping and coping system that resists vandalism and improves the durability of the wall. 36 SPIL SHPS
CUSTOMER COPY C M D G_C M D-S2196 SECTION A-A RECOMMENDED PCB LAYOUT D C 2X A. FITS EDGECARDS THAT ACCEPT PCB's
RVISIONS RV. O. NO SRIPTION T Y 09 KY SOT IN POSITION, KY SOT TWN POSITIONS OPTION, OSOT WG 9 (RP WITH WG 0) //0 JH X.. +.00 +0..0 9.0 -.0-0. (.0 0. ) PTH ROM TOP O INSUTOR TO TOP O PIN ITS GRS THT PT.0.
Any reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
INDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm
LUMINIUM RNGE INEX - LUMINIUM RNGE HINGES Finlu continuous hinge 466 luminium profile continuous hinge - 50 mm Rolled knuckle continuous hinge - 20 mm width Rolled knuckle continuous hinge - 25 mm width
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE
Guided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
DURATAPE TM PVX TUNABLE IP20 INDOOR
e Static Indoor Key eatures Energy efficient LE flexible linear light strip for continuous tunable color in linear applications LEs mounted in a continuous alternating pattern on a 2-circuit LE strip for
Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL
LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake
Quick-change systems Content
Quick-change systems Content Quick-change systems at a glance... 12 Series S... 13 Series SR... 18 Series ASR... 39 Quick-change systems At a glance Quick-change systems > Safe and stable connection of
36 mm RETRACTABLE INSECT SCREEN
GENIUS products feature 36 mm RETRTLE INSET SREEN Genius produces a series of different sizes and designs of assette Roller Insect Screen Systems, developed to suit different design requirements and to
TRD58-S,...) Incremental encoder GIM (e.g. CRE 66, SRE 66, TRD58-K, SLS 66,...) CM 50 Kxx58 / Txx58-k Rxx36 / Txx36 Txx50.
Mounting ccessories for Encoders, impulse generators Mounting clamps, couplings, reducing bush, insulating flanges, mounting brackets Document no.: MZ 10111 ME Date: 27.11.2017 Synchro-clamps (each encoder
High-Precision Linear Stage
High-Prcision Linar Stag High Travl Accuracy L-511 Travl rangs to 155 mm (6") Rpatability to 0.1 µm DC, BLDC, and DC gar motors Stppr motors Optional linar ncodr for dirct position masurmnt Dirction-snsing
WATER SOURCE HEAT PUMP WSHP
WTR SOUR HT PUMP WSHP I IR Water Source Heat Pump Units 3 onsole WSHP 4 onsole imensions 5 Vertical Stack WSHP 6 Vertical Stack imensions 7 Horizontal WSHP 8 Horizontal imensions 9 Vertical loset WSHP
Pneumatic Tyred Castor Single Wheel
Pneumatic Tyred astor Single High speed applications (up to 10Kph) Multi-terrain operation capability Option for bespoke applications Incorporates reliability of WG swivel mechanism Brauer build quality
Linear Units with Belt Drive and Slide Guide
84 www.danahermotion.com Linear Units Linear Units with Belt Drive and Slide Guide Movopart Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness Typical
SPIRAL STAIR INSTALLATION GUIDE
SPIRAL STAIR INSTALLATION UI cono Stair -Vinyl Handrail -alvanized Illustrations are general and may not match your specific stair design. PARTS 1 4 BASPLAT MAIN BALUSTR CNTR BALUSTR 5 6 7 CNTR COLUMN
SOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1
SONOI VVS pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 TURS Rugged forged brass bodied solenoid valves (mono- or bistable function) designed to provide maximum flow Solenoid
CABINET HARDWARE 1890 Swarthmore Avenue, PO Box 2020 Lakewood, NJ tel , , fax
INT HRWR LPHTIL INX SRIPTION PG SRIPTION PG LL RING SSMLIS.................G29 RINGS.........................G26 thru G29 OLT, SURITY........................... G15 RKTS, HNL.........................G4
Guided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
Roller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
Linear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Data Sheet No. Page Overview 1.40.020E 101-102 Plain Bearing SLIDELINE 1.40.021E 103-104 Roller Guide POWERSLIDE 1.40.022E 105-108 Aluminium Roller Guide
110
110 www.danahermotion.com Linear Units Linear Lifting Units SpeedLine, Movo Z Developed for lifting applications Telescopic models available Models with ball screw or belt drive Load up to 750 kg High
Control stations and enclosures Control station enclosures : insulated, metal and flush mounting
Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
ORIGA SYSTEM PLUS OSP-P
ORIGA SYSTEM PLUS OSP-P The ORIGINAL rodless pneumatic cylinders A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility. The
REMOVE EXIST. SLAB. INSTALL NEW 12" CONCRETE SLAB REINFORCED WITH 6X6 W2.1XW2.1 WWF CONCRETE SLAB CONTROL JOINT SEE TYP. DETAIL (TYP.
INSTLL NW " ONRT X W.XW. WWF N. Lincoln Street Wilmington, 90 0'- /" ONRT SL ONTROL JOINT S TYP. TIL INSTLL NW " ONRT X W.XW. WWF (P) 0.. (F) 0.. abhagen@h.com www.h.com ONSULTNTS aker, Ingram & ssociates
41 mm RETRACTABLE INSECT SCREEN
GENIUS products feature 41 mm RETRTLE INSET SREEN Genius produces a series of different sizes and designs of assette Roller Insect Screen Systems, developed to suit different design requirements and to
Tubeclamps Ltd. All rights reserved. TECHNICAL MANUAL
2011 - Tulmps Lt. All rights rsrv. TECHNICAL MANUAL FITTINGS SPECIFICATION EASY TO USE r Hot Dip Glvnis (to BS EN ISO 1461) Mlll s of us vry muh in min. No spil skills r rquir - no wling, no ning, no thring
RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)
RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can
LM-P608 Portal Axis. Features. Versions
The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications
Standard Duty, Heavy Duty and Mill Duty Steel Link PowerTrak
LSON able/hose arrier Reference uide Standard Duty, Heavy Duty and Mill Duty Steel Link PowerTrak PT-8 here to Begin This catalog is organized to help you properly size and apply Type PowerTrak. 1. Become
441 SERIES POWER ADJUSTABLE DOOR CLOSERS
441 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 1 to 6 Universal retrofit hole spacing actory preset to size 3 Power adjustable arm bracket Tri-pack for regular, parallel arm and top jamb