Fume Arms. AQC source capture equipment. Août 14, 2008 version. Leaflet under construction. More information to come at a later date.

Transcription

1 AQC source capture equipment Fume Arms Août 14, 2008 version. Leaflet under construction. More information to come at a later date. No internal adjustment mooth tubes, low static pressure Air volume damper included elf-locking joints 2 grab handles for arm positioning Hood diverter increases capture velocity Cast aluminum joints 5 different diameters 5 different tube materials uperior technology generating substantial operating savings

2 High-roductivity Innovative roducts MAXAI Articulated fume extractor arm Overhead canopies are a thing of the past. Workers were actually breathing the dust and smoke-filled air as it was travelling upward toward the canopy. ource capture is the safe and the right way to eliminate the harmful pollutants significantly that are the primary cause of lung diseases. Maxair fume arms are built to reduce the presence of industrial indoor air particles. From laboratories right up to the large welding shops, Maxair fume arms will get the job done. A Leading-dge, High-erformance Company he AQC Dust Collecting ystems division manufactures a full range of safe, industrial dust collectors, as well as dust and smoke capture equipment at the leading edge of air pollution control technologies based on more than 30 years experience in the field. AQC s strength lies in its innovative products designed and developed to generate substantial savings throughout their entire operating life. AQC is renowned for its technological innovation, safe and sophisticated equipment design, as well as its robust and precise product manufacturing. For example, the unique design of the baffles inside AQC dust collectors makes filter cleaning easy. he AQC cartridge holder design provides maximum filter surface and enhanced filter performance. he ultra-smooth concept inside AQC fume arms makes them maintenance-free. In short, AQC equipment is designed and built to generate substantial operating savings in terms of time, money and energy. his translates to major reductions in operating costs from 10 to 20% throughout the equipment s service life. his scale of savings can represent a significant portion of the equipment s total purchase price. Companies looking to maximize their profitability should factor in these savings when purchasing equipment. he unique design and manufacturing of AQC equipment generates significant savings for various reasons : ubstantial increase in the duration of filters. Lower energy consumption during years of use. ignificantly less maintenance (easy to clean, robust manufacturing, a minimum number of more reliable and durable parts). educed operating costs (less frequent overhauls, lack of or minimum down time, etc.). Lower administrative costs (coordination, follow-ups, supervision) due to much less frequent breakdowns. afe design can prevent serious or even fatal accidents. Increased comfort and productivity of personnel. ypical acquisition and operating dust collection equipment costs quipment acquisition cost quipment operating cost*: energy, filters, maintenance, overhauls, repairs, breakdowns quipment total cost he acquisition cost is just one part of the equation. It s the total cost including the operating cost *throughout the life cycle of the equipment that must be kept low. his is what AQC delivers. he advanced technology, design, robustness, durability and safety of AQC products generate major savings during the equipment s entire life cycle. 2

3 A full line of articulated fume extractor arms fficient, robust and easy to handle Most of our competitors do not include these standard features : Highly functional design facilitates fume arm handling and ease of movement. All supports and articulation joints are outside of the fume arm. he inside is smooth, without any obstacles that could reduce air flow, accumulate deposits and increase internal friction, which consume energy unnecessarily. xternal supports and articulation joints are readily accessible, easy to adjust and require no maintenance. Air diverter in hood significantly increases dust and smoke capture velocity. he unique design of the robust and durable top pivot made of steel makes 360 rotation easy. he Maxair steel tube fume arm is far more spark-resistant than constructions with a flexible hose. All Maxair arms are delivered preassembled and adjusted, ready for rapid installation and operation. he Maxair fume extractor arm has arrived... Multi-application equipment Welding Gouging Dusts Cutting Grinding Fumes xtrusion lines Gases able/bench mount model ypical applications for the Maxair fume arms 3 [75mm] and 4 [100mm] Laboratories esearch facilities Beauty parlors mall dust applications Museums oldering Light welding 3 arms available in 3 [1 m] and 5 [1.5 m] models 4 arms available in 5 [1.5 m], 7 [2 m] and 8 [2.5 m] models 5 [125mm] 6 [160mm] 8 [200mm] Hanghing model Medium to heavy welding Heavy smoke lasma cutting Grinding and sanding Foundries Large dusts applications Gouging hese arms are available in 7 [2m], 10 [3m] and 14 [4m] lengths tainless steel arms (all diameters and all lengths) specially designed for : harmaceutical Food processing Caustics Corrosive gases olvent fumes Laboratories High temperature High humidity Aggressive applications F.D.A. hose available 304 stainless steel model (luster finish) Also available in 316 (brushed finish) elescopic model Ideal for : Confined space (cubicles) eaching facilities Low-ceiling applications elescopic 6 [160mm] fume arms Fume arm tubes are made of stainless steel and steel with cast aluminum joints, which include friction discs and are fully adjustable. he arms have a handle that completely encircles the hood to facilitate easy positioning from all sides. he hood diameter is 13 [33 cm]. All joints include 300 o F (150 o C) hoses which are gear clamped to the tubes. Ajustable internal teflon rings permit easy and smooth telescoping action. 3

4 Outstanding Maxair standard features Direct mount fan (option) ncapsulated recoil spring elf-locking aluminum cast external joints Heavy-duty steel support bracket mooth tube design ube grab handle (on 5, 6 and 8 arms) Velocity air diverter within the hood (standard). Light kit mounting (optional) otating socket Air volume damper Hood grab handle 360 o rotation at the hood Note : o assure proper installation, refer to local building laws and requirements. upport structure has to meet sturdiness and reliability for weight and torque of fume arm and equipment. 4 General description tandard fume arm tubes are made of steel with external cast aluminum joints, which include friction discs and are fully adjustable. he arms have a handle that completely encircles the hood to facilitate easy positioning. Aluminum hood diameters vary from 7" on the 3" arms, to 13" on the 6" and the 8" arms. All joints include a 300 o F (150 o C) hoses, which are gear clamped to the tubes. All hoods may be fitted with an optional light kit. he hood diverter (except on 3 arms) increases capture velocity. Fan start/stop switches may also be installed on fume hoods. MAXAI self-locking arms can be combined with several accessories to provide the best solution to specific problems. A large variety of hoods can be manufactured to suit particular requirements. ubes are also available in VC, aluminium, 304 stainless steel (luster finish) or 316 stainless steel (brushed finish). Custom colors for arm tubes are available on request (minimum quantity required).

5 Model numbers Hanging and table/bench mount CHA 1 Hanging Bench mount tainless steel hanging tainless steel bench mount Arm diameter Arm length tandard hood diameter Optional hood diameter Weight [lbs] / [kg] FA-HG3-03 FA-G3-03 FA-H3-03 FA / 75 3 / / / 6.3 FA-HG3-05 FA-G3-05 FA-H3-05 FA / 75 5 / / / 7.2 FA-HG4-05 FA-G4-05 FA-H4-05 FA / / / / 7.7 FA-HG4-07 FA-G4-07 FA-H4-07 FA / / / / 8.6 FA-HG4-08 FA-G4-08 FA-H4-08 FA / / / / 10 FA-HG5-07 FA-G5-07 FA-H5-07 FA / / / / / 17.2 FA-HG5-10 FA-G5-10 FA-H5-10 FA / / / / / 19.5 FA-HG5-14 FA-G5-14 FA-H5-14 FA / / / / / 21.3 FA-HG6-07 FA-G6-07 FA-H6-07 FA / / / / / 20 FA-HG6-10 FA-G6-10 FA-H6-10 FA / / / / / 23.5 FA-HG6-14 FA-G6-14 FA-H6-14 FA / / / / / 27.2 FA-HG8-07 FA-G8-07 FA-H8-07 FA / / / / / 26 FA-HG8-10 FA-G8-10 FA-H8-10 FA / / / / / 30 FA-HG8-14 FA-G8-14 FA-H8-14 FA / / / / / 33.5 elescopic fume arm 6 [160 mm] only CHA 2 Model Minimum reach Maximum reach tandard hood diameter Optional hood diameter Weight [lbs] / [kg] FA-G / / / / / 20 FA-G / / / / / 24 FA-G / / / / / 31 ecommended air flow CHA 3 ecommended fan selection CHA 4 Arm diameter CFM M 3 /Hr Arm diameter Fan model H / KW 3 / / / / / / / / / / / / / / / / 75 DF / / 100 DF / / 125 DF-11 1/ / 160 DF-01 1/ / 200 DF-02 2/

6 Maxidrive fans (3450..M.) Backward inclined (recommended for 6 and 8 diameter arms [160mm and 200mm]) A C I a w.g tatic pressure & airflow DF-01 CFM m 3 /hr DF AIFLOW Fan dimensions Model ower [H] Dimensions A B F H L G h d1 d2 d3 d4 Nb CHA 5 Weight [lbs] / [kg] DF-O1 1 / / / / / / / / / / / /9 6/ /31.8 DF-O2 2 / / / / / / / / / / / / 9 8 / / 37.3 lectrical note: Motors are available in all voltages. pecify on order. echnical note: efer to Maxidrive fan leaflet for complete data. ecommended fans above are designed for arrangement as shown on page 9 of this leaflet. adial blade (recommended for 3, 4 and 5 diameter arms [75mm, 100mm and 125mm]) A C I a w.g tatic pressure & airflow CFM m 3 /hr DF-8 DF-9 DF AIFLOW Fan dimensions Model [H] / [KW] Dimensions A B C D F G H J K L M N CHA 6 Weight [lbs] / [kg] DF / / / / / 76 5 / / / / / / / / / / / 20 DF / / / / / / / / / / / / / / / / 21 DF-11 1 / / / / / / / / / / / / / / / / 28 lectrical note: Motors are available in all voltages. pecify on order. ecommended fans above are designed for arrangement as shown on page 9 of this leaflet. 6

7 Maxair fume arm wall and bench mounting bracket Brackets shown below must be ordered separately. i B b OD2 OD1 h H N x OD3 L OD4* Arm bracket dimensions CHA 7 Bracket type Dimensions Weight [lbs] / ainted tainless Arm Diameter D1 D2 N D3 D4 L I H h B b i steel steel [kg] WBA-003 WBA-3 3 / / / / / / / / / / / / 0.45 WBA-004 WBA-4 4 / / / / / / / / / / / / 0.45 WBA-005 WBA-5 5 / / / / / / / / / / / / 32 5 / 2.3 Fan/Arm support bracket dimensions b1 Bracket shown above is built to support arm only or fan/arm arrangements. CHA 8 Model Dimensions Weight ainted tainless [lbs] / steel steel D1 D2 Nb D3 D4 L I H h B b b1 i [kg] WBF-006 WBF / / / / / / / / / / / / / 5 WBF-008 WBF-8 8 / / / / / / / / / / / / / 5.9 7

8 Maxair maximum reach for hanging/bench mount models MAXAI hanging model MAXAI able/bench mount model A C B 45 [1125 mm] off floor 32 [800 mm] off floor WOK BNCH WOK BNCH 45 [1125 mm] off floor CHA 9 A Arm length B Maximum reach at 45" off floor C Maximum reach at 45" off floor D Maximum reach at 45" off floor ecommended mounting height 3 / / / / / 1.5 D 5 / / / 1,5 7 / / / / / / / / / / / / / / / / / 2.7 Full pivot maximum work radius with ceiling installation 14 / / / / / 3 Maxair maximum reach with Maxireach extension booms Available in 6 [160 m] and 8 [200 m] diameters. efer to Maxireach leaflet for proper selection and dimensions. ingle and double pivot booms available. ource capture has never been so easy and efficient 20 [ 6.1 m] 11.2 [3.4 m] Maximum reach of 31.2 [9.6 m] 8

9 Maxair single fume arm and fan arrangement Available in all diameters ypical installation of source capture arm for exhaust Maxair fume arm and Maxireach extension boom arrangement Available in 6 [160mm] and 8 [200mm] diameters. efer to Maxireach leaflet for proper selection. ypical installation of source capture arm with extended reach Maxair fume arm and Maxirail duct/trolley system ypical installation of source capture arms with sliding trolley Available trolleys for 3 [75mm], 4 [100mm], 5 [125mm] and 6 [160mm] arms. Maxair fume arm with Maxiflo dust collector arrangement ypical installation of source capture arms and filtration Note: efer to arm diameter chart # 3 for recommended air flow. efer to Maxiflo leaflet for proper dust collector selection. 9

10 12 volts 35 watts halogen light kit mounting models Light kit model (only) 7122L Fan switch (only) model 7122F Light and fan switch model 7122LF Optional hood mesh protection model FA-HM Available starters with transformers for light kits and fan switches Models lectrical CB 115/1/60 CB 230/1/60 CB 208/3/60 CB 460/3/60 Digits shown indicate voltage/phases/cycle When ordered, specify if arms are equipped with light kits and/or fan switches. If such equipped, starters will be supplied with low voltage transformers. CB 575/3/60 Note: Diverter and light kit assembly not available on 3 arms. Fan start/stop switch available. Note: When ordered in conjunction with Maxair fume arms, light kits and fan control switches will be factory installed. If ordered after arms are delivered, retrofit air diverters and assembly instructions will be supplied. Maxair fume arm extensions and floor posts Vertical floor posts Ceiling support extensions Models Height VF-07 7/2.15 For arms 7 / 2.15 [m] long and less VF-08 8 / 2.6 For arms 8.5 & 10 / 2.7 & 3 [m] long VF / 3.1 For arms 14 / 4.3 [m] long Models Height C / 750 C / 900 C / 1050 When ordered add suffix digits according to arm diameter x.: VF refers to 6 diameter arm When ordered add suffix digits according to arm diameter x.: C refers to 6 diameter arm Horizontal fixed extensions Models Length HF-02 2 / 0.6 HF-04 4 / 1.25 When ordered add suffix digits according to arm diameter x: HF indicates for 6 diameter arm 10 Installation note: efer to local building laws prior to installation. upport structure has to meet sturdiness and weight of equipment.

11 tatic pressure & airflow A C I a w.g MAXAI 3" (75 mm) A C I a w.g MAXAI 6" (160 mm) CFM m 3 /hr Folded Arm nfolded Arm AIFLOW Folded Arm nfolded Arm CFM m 3 /hr AIFLOW A I C a w.g MAXAI 4" (100 mm) A I C a w.g MAXAI 8" (200 mm) CFM m 3 /hr Folded Arm nfolded Arm AIFLOW CFM m 3 /hr Folded Arm nfolded Arm AIFLOW A I C a. w.g MAXAI 5" (125 mm) A I C a w.g MAXAI LCOING 6" CFM m 3 /hr Folded Arm nfolded Arm AIFLOW CFM m 3 /hr AIFLOW Note: MAXAI fume arms are available in different lengths but have minimal variation in static pressure curves indicated above. Options Halogen light kits (12 V. / 35 watt) Fan and light control switch on the hood High temperature or F.D.A. hoses at joints Horizontal fixed extensions Vertical floor posts Ceiling support extensions Maxireach extension booms (up to 20 / 6m) rotective wire mesh in hood Fan mounted above arm bracket Larger or custom inlet hoods Custom colors (minimum quantities required) Grounding wire for static discharge on.v.c. tubes 11

12 Create your Maxair fume arm specification 1. Fume arm should include an air volume damper with handle on hood tube (standard) and should include an air diverter within the hood to increase inlet velocity (except on 3 arms). 2. Fume arm should include a circular grab handle around the hood for positioning of the arm and a secondary hood tube grab handle for 5, 6 and 8 [ and 200 mm] diameter arms. 3. Fume arm will be supplied with an encapsulated recoil spring for 7, 10 and 14 [2, 3 and 4 m] arms. 4. Fume arm should be: a) Hanging model b) Bench mount model 5. Fume arm should have diameter of: a) 3 [75mm] with 7 [175mm] hood B) 4 [100mm] with 8 [200mm] hood C) 5 [125mm] with 10 [250mm] hood D) 6 [160mm] with 13 [325mm] hood ) 8 [200mm] with 13 [325mm] hood 3 [75mm] fume arm should have length of : A) 3 [0.9m] B) 5 [1,5m] 4 [100mm] fume arm should have length of : A) 5 [1,5m] B) 7 [2,1m] C) 8, 5 [2,5m] 5, 6 and 8 [125, 160 and 200mm] fume arm should have length of : A) 7 [2m] B) 10 [3m] C) 14 [4m] 6. Fume arm should be telescopic type (6 only): a) 48 [1200mm] to 60 travel [1500mm] B) 48 [1200mm] to 72 travel [1800mm] C) 72 [1800mm] to 96 travel [2400mm] Note: pecifications listed above may be modified to suit application. Contact A.Q.C. or representative for information. Your A.Q.C. representative is : 7. Fume arm should have exterior joints made of stamped steel for: A) 3 [75mm] arm B) 4 [100mm] arm Fume arm should have exterior joints made of cast aluminium for: A) 5 [125mm] arm B) 6 [160mm] arm C) 8 [200mm] arm 8. Fume arm tubes should be constructed of: A) powder coat painted steel B) 304 luster finish stainless steel C) 316 brushed finish stainless steel D).V.C. (painted tubes) ) aluminum (painted or bare tubes) 9. Fume arm will be supplied with: A) powder coat painted steel bracket B) 304 stainless steel support bracket C) 316 stainless steel support bracket 10. Fume arm hoses will be: A) cotton neoprene 250 o F [120 o C] hose B) silicone fibreglass high temperature 600 o F [315 o C] hose C) teflon silicone 850 o F [450 o C] hose D) F.D.A. hose 11. Fume arm will be supplied with: A) halogen light kit 12 volts, 35 watts and switch model 7122L. B) fan control switch 12 volts model 7122F C) halogen light kit 12 volts, 35 watts with switch and fan control switch model 7222LF. D) regular fan starter ) fan starter for arm with light kit and fan switch F) wide screen mesh in hood 12. Fume arm hood should have a diameter of : 16 for 5 arms, 20 for 6 and 8 diameter arms in lieu of standard hood o obtain a free copy of our full-colour corporate brochure, please call : , de la abliere, Bois-des-Filion (Quebec) Canada J6Z 47 el. : Fax : (450) Web site : info@aqcdust.com Maxair-B 0906 Copyrigth A.Q.C. Inc. 12 Continuous product improvement is a policy of A.Q.C. Inc. roduct features and specifications may be modified without prior notice.