UTILITY PIPE FITTINGS AND ACCESSORIES

Size: px

Start display at page:

Download "UTILITY PIPE FITTINGS AND ACCESSORIES"

Marjorie Wilson
5 years ago
Views:

UIIY PIPE FIINGS ND CCESSOIES UC.17.01 Star Pipe Products 4018 Westhollow Pkwy.

1 UIIY PIPE FIINGS ND CCESSOIES UC Star Pipe Products 4018 Westhollow Pkwy. ouston, X oll-free: (800) el: (281) Fax: (281)

2 CMIDGE C CENE Call Centers 1144 Industrial oad Cambridge, Ontario, N34W4 el: (519) oll Free: (888) Fax: (519) ritish Columbia lberta Saskatchewan Manitoba Ontario Quebec New runswick Washington Maine Montana ermont New ampshire Oregon Nevada Idaho Wyoming North Dakota South Dakota Minnesota Wisconsin Michigan New York Pennsylvania Massachusetts Connecticut hode Island New ersey California Utah Colorado Nebraska Iowa rizona New Mexico Kansas Oklahoma Missouri rkansas Illinois Indiana Kentucky ennessee Ohio West Virginia Virginia North Carolina South Carolina Delaware Maryland Mississippi labama Georgia laska exas ouisiana Florida Puerto ico awaii 1223 Sherborn Street, Ste 102 Corona, C el: (951) oll Free: (877) Fax: (951) Distribution Centers Sacramento, C 830 W. National Drive, Ste 150 Sacramento, C COON C CENE Phoenix, Z 1250 East adley Street, Ste 2 Phoenix, Z OUSON C CENE Corporate eadquarters 4018 Westhollow Pkwy. ouston, X el: (281) oll Free: (800) Fax: (281) Montreal, CN 3067 ue oseph. ombardier aval, QC 7P 6C5 Kansas City, MO 1836 evee oad North Kansas City, MO Orlando, F 601 Gills Drive, Ste 100 Orlando, F Salt ake City, U 2801 West Parkway lvd. Salt ake City, U tlanta, G 5307 Peachtree Industrial lvd. Chamblee, G Indianapolis, IN 6119 Guion oad Indianapolis, IN ichmond, V 2913 ransport Street, Ste 101 ichmond, V Seattle, W nd Street East Sumner, W ouston, X 4023 Westhollow Pkwy, Suite 108 ouston, X 77082

able of Contents UIIY PIPE FIINGS ND CCESSOIES GENE EMS & CONDIIONS COMPC M FIINGS Sizes: 2" - 64" pg.

31-38 Sizes: 4" - 24" FNGED FIINGS & CCESSOY PCKS Sizes: 1" - 64" pg. pg. 2 21-30 39-50 FNGES pg.

53 NSI/WW C111/21.11 NSI/WW C110/21.10 NSI/WW C153/21.53 NSI/WW C110/21.10 NSI/WW C115/21.

vailable PESE C FO - Product Data/Specifications Sheets - Material Safety Data Sheets - Special Coating

3 able of Contents UIIY PIPE FIINGS ND CCESSOIES GENE EMS & CONDIIONS COMPC M FIINGS Sizes: 2" - 64" pg. pg CCESSOIES pg FU ODY M FIINGS Sizes: 2" - 64" COMPC PUS-ON FIINGS pg Sizes: 4" - 24" FNGED FIINGS & CCESSOY PCKS Sizes: 1" - 64" pg. pg FNGES pg Sizes: 2" - 64" ININGS & COINGS Ceramic Epoxy Cement ined Double Cement ined NSI/WW C153/21.53 NSI/WW C111/21.11 NSI/WW C110/21.10 NSI/WW C153/21.53 NSI/WW C110/21.10 NSI/WW C115/21.15 U/NSI/NSF Standards 61 and 372 Epoxy Coal ar Epoxy sphalt Coatings Fusion onded Epoxy Glass ining are/are vailable PESE C FO - Product Data/Specifications Sheets - Material Safety Data Sheets - Special Coating Options MEME { dditional inings & Coatings vailable } UC EGISEED DEMK OF S PIPE PODUCS Page 1 S PIPE PODUCS OUSON COPOE O FEE FX

4 General erms and Conditions GENE DEIVEY hese terms and conditions shall control with respect to any purchase order or sale of Seller s products. No waiver, alteration or modification of these terms and conditions whether on uyer s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller. Seller will make every effort to complete delivery of products as indicated on Seller s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no back charge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatsoever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to uyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay. WNY Seller warrants for one year from the date of shipment Seller s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller s examination shall disclose to its satisfaction that the product is defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective product or workmanship or damage resulting from the same. No adjustment shall be implemented unless product in question is returned to seller in its originally installed condition, still connected to other components of the joint. uyer must contact Seller as quickly as possible so Seller can assess product in its installed condition. No claims will be honored unless claim is made within forty-five (45) days of the defect being found. Where engineering design or fabrication work is supplied, uyer s acceptance of Seller s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller s product warranty. IS IS SEE S SOE WNY. SEE MKES NO OE WNY OF NY KIND, EXPESSED O IMPIED ND IMPIED WNIES OF MECNIIY ND FINESS FO PICU PUPOSE WIC EXCEED SEE S FO- ESED OIGION E EEY DISCIMED Y SEE ND EXCUDED FOM IS WNY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or product. his warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller s factory, in any manner; (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by uyer or its representatives. his warranty is non-transferable. IIIY Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under Warranty above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to uyer. DISCIME Per WW/NSI C , the flanged joint is generally specified for above ground service. Underground use of the flanged joint is generally not desirable due to the rigidity of the joint. EUNS SIPMENS PODUCS PICES FOCE MEUE XES Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following: (a) ll material returned must, on its arrival at Seller s plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) handling charge deduction of twenty-five percent (25%) will be made from all credit memoranda issued for material returned; (c) ransportation charges, if not prepaid will be deducted from credit memoranda. ll products sent out will be carefully examined, counted and packed. he cost of any special packing or special handling caused by uyer s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller s responsibility ceases, and title passes, on delivery to the carrier. Orders covering special or non-standard products are not subject to cancellation except on such terms as Seller may specify on application. Prices and designs are subject to change without notice. ll prices are F.O.. Point of Shipment, unless otherwise stated. Seller shall not be responsible or liable in any way for any failure to perform due to acts of God, fire, flood, serious accidents, foreign or United States embargo, war or riot, serious shortages, unavailability or significant price increases in commodities, materials or components, labor disputes, interruption of transportation, loss of essential production services, laws, rules, regulations, instructions or acts of any U.S. or foreign governmental authority, or by any other event beyond the reasonable control of Seller or its subcontractors. he amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be added to the purchase price and shall be paid by uyer unless uyer provides Seller with an exemption certificate acceptable to the taxing authorities. UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 2

5 GENE SPECIFICIONS MEI: Ductile Iron per SM 536 PESSUE: ESING: 350 PSI rating for 2" - 24" sizes, 250 PSI rating for 30" - 48" sizes and 150 PSI rating for 54" - 64" sizes In accordance with NSI/WW C153/21.53, NSI/WW C111/21.11, U and FM requirements Compact M Fittings NSI/WW C153/21.53 YING ENG: In accordance with NSI/WW C153/21.53 (fittings not listed in NSI/WW have dimensions per Star design as noted in the catalog) DEFECION: 2"- 4"=8 6"=7 8"-12"=5 14"-16"=3 ½ 18"-24"=3 30"-64"=2 WEIGS: FNGES: CEMEN INING: COING: re in pounds, unless noted otherwise and do not include accessories, cement lining and coating Flanged ends on fittings match NSI/WW C115/21.15 and NSI 16.1 class 125 flanges In accordance with NSI/WW C104/ size 2" - 3" single thickness and sizes 4" - 64" double thickness. Click here for a pressure jetting discussion or visit sphaltic seal coat inside and out in accordance with NSI/WW C104/21.4 and referenced in NSI/WW C153/21.53 GSKES: S in accordance with NSI/WW C111/21.11 (see pg. 16) -OS/NUS: ow alloy steel in accordance with NSI/WW C111/21.11 (see pg. 18) PPOVS: DIMENSIONS: INSION: 3" - 12" U/UC isted 2" and greater are U/NSI/NSF Standards 61 and 372 3" - 16" FM PPOVED. Please consult factory for detail listing and approvals. ll dimensions are in inches unless noted otherwise. (Click here for a short commentary on non-pressure sewer applications or visit /non-pressure_sewer_applications.asp. eview commentary before ordering or installing fittings for this application.) Per NSI/WW C600 and C111 using DIP conforming to C150/C151 and PVC pipe conforming to C900/C905 Utility Pipe Fittings and ccessories 2" - 64" DUCIE ION MECNIC OIN COMPC FIINGS M K2 7 Ø X S K1 MEME 2 D C 0.12 in in. F 2"-24" = 0.31 in. 30"-64" = 0.38 in. MECNICOIN DIMENSIONS DI. C DI. D DI. F DI. DI. K1 DI. K2 DI. M S Ø X DI º ¾ ⅝ x º ¾ ⅝ x º ⅞ ¾ x 3 ½ º ⅞ ¾ x 3 ½ º ⅞ ¾ x 3 ½ º ⅞ ¾ x 3 ½ º ⅞ ¾ x 3 ½ º ⅞ ¾ x º ⅞ ¾ x º ⅞ ¾ x º ⅞ ¾ x º ⅞ ¾ x 4 ½ º 1 ⅛ 1 x 5 ½ º 1 ⅛ 1 x 5 ½ º 1 ⅜ 1 ¼ x º 1 ⅜ 1 ¼ x º 1 ⅜ 1 ¼ x 6 ½ º 1 ⅜ 1 ¼ x 6 ½ º 1 ⅜ 1 ¼ x 6 ½ 38 OS NO. UC EGISEED DEMK OF S PIPE PODUCS Page 3 S PIPE PODUCS OUSON COPOE O FEE FX

6 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/21.53 M x M ENDS 90º M x M ENDS (¼) W 60º M x M ENDS (1/6) W 45º M x M ENDS (⅛) W 30º M x M ENDS (1/12) W 22 ½º M x M ENDS (1/16) W 11 ¼º M x M ENDS (1/32) W 5 ⅝º M x M ENDS (1/64) W M x PE ENDS 90º M x PE ENDS (¼) W 60º M x PE ENDS (1/6) W 45º M x PE ENDS (⅛) W 30º M x PE ENDS (1/12) W 22 ½º M x PE ENDS (1/16) W 11 ¼º M x PE ENDS (1/32) W 5 5/8º M x PE ENDS (1/64) W UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 4

7 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/21.53 M x FE ENDS 90º M x FE ENDS (¼) W 45º M x FE ENDS (⅛) W 22 ½º M x FE ENDS (1/16) W 11 ¼º M x FE ENDS (1/32) W M x FNGE DPE W M x M EES 1 W 2 x x x x x x x x x 4 x x x 6 x x x x x 6 x x 6 x x x x x x x x x (Con t) UC EGISEED DEMK OF S PIPE PODUCS Page 5 S PIPE PODUCS OUSON COPOE O FEE FX

8 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/21.53 M x M EES (Con t) 1 W 12 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (Con t) M x M EES (Con t) 1 W 36 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x M x M PPED EES / COSSES (2" P) MX P W ½ hreads in ccordance with NSI/SME UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 6

9 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/ M x FE EES 1 W 3 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (Con t) M x FE EES (Con t) 1 1 W 30 x x x x x x x x x x x x x x M x SWIVE PE EE W/ SWIVE GND 1 W 6 x x x x M x M UE WYES 1 1 W 20 x 20 x x 14 x x 24 x x 30 x UC EGISEED DEMK OF S PIPE PODUCS Page 7 S PIPE PODUCS OUSON COPOE O FEE FX

10 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/ M COSSES 1 W 3 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x M COSSES (Con t) 1 W 30 x x x x x x x x x x x x x x x x x M x FNGE COSS 1 1 W 6 x x x x x x x x x (Con t) UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 8

11 Y 1 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/ Y ID 45 M ES 1 Y W 3 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x M x PE x M EES Z 1 Z W 6 x x x x x x x M x PE CUING IN SEEVE W/ OVE GND ID 1 1 W M CPS & PUGS (SOID O PPED) 3" - 16" 18" - 64" CP 1 MX. P PUGS W CPS ½ ½ ½ ½ hreads in ccordance with NSI/SME " - 16" 18"- 64" PUG UC EGISEED DEMK OF S PIPE PODUCS Page 9 S PIPE PODUCS OUSON COPOE O FEE FX

12 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/21.53 M x M NGENI EES 1 W 1 16 x x x x x x x x x x M OFFSES M x M M x PE M x SWIVE W/ SWIVE GND W 3 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x W W UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 10

13 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/ EDUCES M x M SE E PE x PE M x FE ECCENIC 1 1 W 1 W 4 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x W 1 W 1 W W (Con t) UC EGISEED DEMK OF S PIPE PODUCS Page 11 S PIPE PODUCS OUSON COPOE O FEE FX

14 Utility Pipe Fittings and ccessories NSI/WW C153/21.53 EDUCES (Con t) M x M SE E PE x PE M x FE ECCENIC 1 W W W Compact M Fittings 36 x x x x x x x x x x x x x x x x x x x x W W W UC EGISEED DEMK OF S PIPE PODUCS 1 M SEEVES 2 SO SEEVES ONG SEEVES 1 W 2 W M x M ED 90 Nom. I W 20 x x PE x M ED 90 Nom. I W 48 x ID M DU PUPOSE SEEVES W/ OVE GNDS PIPE (I.D.) W S PIPE PODUCS OUSON COPOE O FEE FX Page 12

15 Utility Pipe Fittings and ccessories Compact M Fittings NSI/WW C153/ SWIVE x SOID YDN DPES W/ SWIVE GND W 4 x x x x x x x x x x x M x SWIVE YDN EES W/ SWIVE GND 1 W 6 x x x x x x x x x x x x x x x x x x x x X SWIVE x SWIVE YDN DPES W/ 2 SWIVE GNDS W 6 x x x SWIVE x SWIVE YDN E W/ 2 SWIVE GNDS W SWIVE GNDS W -ED OS 4 8 (2) 3/4 x 3 1/ (2) 3/4 x 3 1/ (2) 3/4 x 3 1/ (2) 3/4 x 4 UC EGISEED DEMK OF S PIPE PODUCS Page 13 S PIPE PODUCS OUSON COPOE O FEE FX

16 DI S Utility Pipe Fittings and ccessories M ccessories NSI/WW C111/21.11 GNDS, GSKES, OS & NUS GENE SPECIFICION MEI: PESSUE: ESING: DIMENSIONS: WEIGS: COING: Ductile Iron per SM PSI rating for 2" - 24" sizes, 250 PSI rating for 30" - 48" sizes and 150 PSI rating for 54" - 64" sizes In accordance with NSI/WW C111/21.11, U and FM requirements re in accordance with NSI/WW C111/21.11, U and FM requirements and are in inches unless noted otherwise re in pounds, unless noted otherwise and do not include accessories sphaltic seal coat is in accordance with NSI/WW C104/21.4 unless otherwise specified. PPOVS: Compact Glands 3" - 12" Underwrites aboratories & UC isted. Factory Mutual approved 3"-16". MEME D I 8 IN 30^" 350 M M G S O.D..C. O.D..C. I.D. C I.D. C S 2-24 S S M COMPC GNDS UC EGISEED DEMK OF S PIPE PODUCS O.D. C I.D..C. O OE Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø O QY W S PIPE PODUCS OUSON COPOE O FEE FX Page 14

17 Utility Pipe Fittings and ccessories M ccessories NSI/WW C111/21.11 O.D..C. M FUODY GNDS I.D. C O.D. C I.D..C Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø O OE O QY W O.D..C. I.D. C M OVE GNDS O.D. C I.D..C. O OE Ø Ø Ø Ø Ø Ø O QY W UC EGISEED DEMK OF S PIPE PODUCS Page 15 S PIPE PODUCS OUSON COPOE O FEE FX

18 Utility Pipe Fittings and ccessories Standard Mechanical oint Gaskets (S, N, EPDM, Neoprene, FKM) NSI/WW C111/21.11 GSKE GENE SPECIFICIONS Star Pipe Products Mechanical oint (M) Gasket dimensions conform to the drawings set forth in NSI/WW C111/ Gasket markings include size, Manufacturer s mark, Country of origin and product identification. No markings are positioned on sealing surfaces per the NSI/WW C111/21.11 standard. M transition gaskets follow the requirements of NSI/WW C111/ where applicable. Standard gasket material is vulcanized styrene butadiene rubber (S). Special application elastomers (EPDM, Nitrile, Neoprene & FKM) are available and shall be identified on all documentation and corresponding gaskets. Star Pipe gaskets are manufactured under quality control standards and procedures that are maintained by the gasket supplier. ppropriate documentation is maintained by the manufacturer and available for review upon request. Star Pipe gasket suppliers maintain a quality assurance program and manual that is reviewed and updated on an ongoing basis to ensure product quality. Star Pipe gasket suppliers perform in house testing and submit to random testing by Underwriters aboratories, Inc. Star Pipe gasket providers are recognized under the component program (U 194/ U 157) of Underwriters aboratories, Inc. Star Pipe provides that our Mechanical oint gaskets for potable or wastewater projects will perform as designed, based on the published chemical and environmental resistance data for "generic" rubber compounds. Star Pipe should be consulted for specific recommendations or for unusual applications. GSKE POPEIES POPEY SM ES MEOD EQUIED VUE ardness, Shore "" D ± 5 Minimum ensile D psi Minimum Elongation D % Minimum ging D573 60% Maximum Compression Set D395, Method 20% esistance to Surface Ozone Cracking D1149 No Cracking GSKE YPE MXIMUM CONINUOUS EMP MXIMUM EXPOSUE EMP SNDD USGE S (Styrene utadiene ubber/ una-s) 160 F 180 F Drinking water, Salt Water, Sanitary Sewage, eclaimed Water, aw Water, Storm Water. Not ecommended for ydrocarbon Service EPDM (Ethylene Propylene) 250 F 300 F lcohols, Dilute cids, Dilute lkalis, Ketones (MEK/cetone), Strong Oxidizing Chemicals; Drinking Water, Salt Water, Sanitary Sewage, eclaimed Water, aw Water, Storm Water. Not ecommended for ydrocarbon Service Neoprene (Polychlorprene / C) 225 F 300 F ydrocarbons, Unrefined Petroleum Products, Greasy Waste; Salt Water, Sanitary Sewage, eclaimed Water, aw Water, Storm Water. Nitrile (N / una-n) 160 F 180 F efined Oils and Fluids, Fats, Greases and Waste; Drinking Water, Sanitary Sewage, eclaimed Water, aw Water, Storm Water. FKM (Flouroelastomer / Viton ) 400 F 500 F romatic ydrocarbons, Chlorinated ydrocarbons, Vegetable Oils, Most Chemicals; Drinking Water, eclaimed Water, aw Water, Storm Water. Viton is a registered trademark of E.I. Du Pont De Nemours & Company. UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 16

19 Utility Pipe Fittings and ccessories M ccessories NSI/WW C111/21.11 Mold (No.) (Mfg. Mark) M E ØD (size) (Year) C G s F 28 for sizes 3-24 in. 20 for sizes in. MECNIC-OIN GSKE PIPE O.D. C ØD ±1 % E F G Mold (No.) (Mfg. M NS Mark) E ØD (size) (Year) C G F NSIION MECNIC-OIN GSKE PIPE O.D. C (EF.) ØD ±1 % E F G UC EGISEED DEMK OF S PIPE PODUCS Page 17 S PIPE PODUCS OUSON COPOE O FEE FX

20 Utility Pipe Fittings and ccessories M ccessories NSI/WW C111/ olts, Double Ended ods & Nuts S SEE SPECIFICIONS: olts & Nuts are manufactured in accordance with NSI / WW C111 / Material is igh Strength ow lloy Steel per NSI/WW C111/ hreads per SME 1.1 unified standard coarse (Class 2 & 2) MECNIC POPEIES CEMIC POPEIES Carbon 0.20% Max Yield Strength PSI (min) Manganese 1.25% Max Elongation in 2in. 20% (min) Sulfur 0.05% Max Nickel 0.25% Min Copper 0.20% Min Combined 1.25% Min (Ni, Cu, Cr) UE O/NU/OD -olts, ods & Nuts have fluoropolymer coating material which is VOC-compliant, resin-bonded, thermally cured and dry lubricant. COING PYSIC POPEIES Film hickness: 0.3 to 0.4 mil per coat Number of Coats: 3 to 4 coats dhesion: 1 mm cross hatch test + 5 Pulls. Good knife resistance Cure est: 50+ubs with MEK. No substrate exposure Pencil ardness: Pencil ardness: 4-6 Volatile Organic Compounds 2.74lbs/gal Stainless Steel -olts & Nuts OYS SS 304 & SS 316 PE SM F593 SPECIFICIONS: -bolt dimensions are manufactured in accordance with NSI / WW C111 / bolt alloys SS 304 and SS 316 per SM F593 eavy ex Nut lloys SS 304 & SS 316 per SM F594. MECNIC POPEIES ensile Strength: 85,000 PSI to 140,000 PSI Yield Strength: 45,000 PSI (min) COING SPECIFICION Nuts have fluoropolymer coating material which is VOC-Compliant, resin-bonded, thermally cured and dry lubricant. COING PYSIC POPEIES UC EGISEED DEMK OF S PIPE PODUCS Film hickness: 0.3 to 0.4 mil per coat Number of Coats: 3 to 4 coats dhesion: 1mm cross hatch test + 5 ape Pulls. Cure est: 50+ ubs with MEK, no substrate exposure Pencil ardness: 4-6 Volatile Organic Compounds 2.74 lbs/gal Continous use temperature - 356ºF Color: SS 304 is green, SS 316 is red MEME S PIPE PODUCS OUSON COPOE O FEE FX Page 18

21 Utility Pipe Fittings and ccessories ccessories NSI/WW C111/ /8-in. adius Maximum F C D Minimum 1/16-in x 45 Chamfer. MECNIC OIN O OQUE PIPE (IN) O (IN) NGE 1 OF OQUE (F-S) 2-3 5/ / / /2 -ED (OW OY SEE) O & NU 1 hese torque ranges are requirements of WW C600 C D EDS PE IN. F ⅝ x ⅝ x 3 ½ ¾ x 3 ½ ¾ x ¾ x 4 ½ ¾ x ¾ x 5 ½ x 5 ½ x ¼ x ¼ x 6 ½ ¼ x 8 ½ /8-in. adius Maximum F C Minimum 1/16-in x 45 Chamfer. E D /2 NI-OION -ED (OW OY SEE) O & NU C D E EDS PE IN. F ⅝ x ⅝ x 3 ½ ¾ x 3 ½ ¾ x ¾ x 4 ½ ¾ x UC EGISEED DEMK OF S PIPE PODUCS Page 19 S PIPE PODUCS OUSON COPOE O FEE FX

Utility Pipe Fittings and ccessories M Eyebolt(Pigtail) & Starlug NSI/WW C115/21.15 M Eyebolt (Pigtail) GENE SPECIFICIONS igh Strength ow alloy steel per NSI/ WW C111/121.11 UNC 2 hreads per SME 1.

00 0.81 ¾ x 5 ½ 5.50 4.50 0.81 ll dimensions in inches. Starlug GENE SPECIFICIONS Designed to assist in restraining of mechanical joint fittings, valves, hydrants and pipes by threaded rods.

the number of Starlugs to be used depending on the pipe size and pipe line working pressure.

22 Utility Pipe Fittings and ccessories M Eyebolt(Pigtail) & Starlug NSI/WW C115/21.15 M Eyebolt (Pigtail) GENE SPECIFICIONS igh Strength ow alloy steel per NSI/ WW C111/ UNC 2 hreads per SME 1.1 Eye bolts can be used in place of -ead bolts Used on sizes 4" through 24" Max. oad (per bolt): 7,500 lbs INFOMION ØC ¾ x 3 ½ ¾ x ¾ x 4 ½ ¾ x ¾ x 5 ½ ll dimensions in inches. Starlug GENE SPECIFICIONS Designed to assist in restraining of mechanical joint fittings, valves, hydrants and pipes by threaded rods. Manufactured with high strength ductile iron per SM 536, Grade Designed for use on sizes 4" through 16" Installed between M ell and M Gland Please refer to the chart below for determining the number of Starlugs to be used depending on the pipe size and pipe line working pressure. Packaging: oxes of 50 each MINIMUM NUME OF SUGS EQUIED FO EC M E PIPE WOKING PESSUE (PSI)* " " " " N 12" N N N 14" N N N N N 16" N N N N N *Pressure ratings include a nominal 2:1 safety factor. N - Not ecommended UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 20

23 2" - 64" DUCIE ION MECNIC OIN FU ODY FIINGS GENE SPECIFICIONS MEI: Ductile iron per SM 536 PESSUE: ESING: 350 PSI rating for 2" - 24" sizes, 250 PSI rating for 30' - 48" and 150 PSI for 54"-64" or as noted In accordance with NSI/WW C110/21.10 Full ody M Fittings YING ENG: In accordance with NSI/WW C110/21.10 (fittings not listed in NSI/WW have dimensions per Star design as noted in the catalog) WEIGS: FNGES: CEMEN INING: COING: re in pounds, unless noted otherwise and do not include accessories, cement lining and coating Flanged ends on fittings match NSI/WW C110/21.10 and NSI 16.1 class 125 flanges. In accordance with NSI/WW C104/ size 2" - 3" single thickness and sizes 4" - 64" double thickness. Click here for a pressure jetting discussion or visit sphaltic seal coat inside and out in accordance with NSI/WW C104/21.4 and referenced in NSI/WW C110/21.10 GSKES: S in accordance with NSI/WW C111/21.11 (see pg. 16) -OS/NUS: ow alloy steel in accordance with NSI/WW C11/21.11 (see pg. 18) PPOVS: Sizes 2" and greater are U/NSI/NSF Standards 61 and 372 DIMENSIONS: INSION: ll dimensions are in inches unless noted otherwise. (Click here for a short commentary on non-pressure sewer applications or visit /non-pressure_sewer_applications.asp. eview commentary before ordering or installing fittings for this application.) Per NSI/WW C600 and C111 using DIP conforming to C150/C151 and PVC pipe conforming to C900/C905 Utility Pipe Fittings and ccessories NSI/WW C110/21.10 MEME MECNIC OIN DIMENSIONS DI. C DI. D DI. F DI. DI. K1 DI. K2 DI. M S Ø X DI º ¾ ⅝ x º ¾ ⅝ x º ⅞ ¾ x 3 ½ º ⅞ ¾ x 3 ½ º ⅞ ¾ x º ⅞ ¾ x º ⅞ ¾ x º ⅞ ¾ x 4 ½ º ⅞ ¾ x 4 ½ º ⅞ ¾ x 4 ½ º ⅞ ¾ x 4 ½ º ⅞ ¾ x º 1 ⅛ 1 x º 1 ⅛ 1 x º 1 ⅜ 1 ¼ x 6 ½ º 1 ⅜ 1 ¼ x 6 ½ { Fittings & Dimensions vailable On equest } OS NO. UC EGISEED DEMK OF S PIPE PODUCS Page 21 S PIPE PODUCS OUSON COPOE O FEE FX

24 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/21.10 M x M ENDS 90º M x M ENDS (¼) W 45º M x M ENDS (⅛) W 22 ½º M x M ENDS ( ) W 11 ¼º M x M ENDS ( ) W M x PE ENDS 90º M x PE ENDS (¼) W 45º M x PE ENDS (⅛) W 22 ½º M x PE ENDS (1/16) W 11 ¼º M x PE ENDS (1/32) W UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 22

25 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/21.10 M x M M x PE M x FNGE DPE W M OFFSES M x M M x PE W W 4 x x x x x x x x x x x x x x x x x x x x x x M x FE ENDS 90º M x FE ENDS (¼) W 45º M x FE ENDS (⅛) W 22 ½º M x FE ENDS (1/16) W 11 ¼º M x FE ENDS (1/32) W UC EGISEED DEMK OF S PIPE PODUCS Page 23 S PIPE PODUCS OUSON COPOE O FEE FX

26 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/ M x M EES 1 W 2 x x x x x x x 4 x x x x x x 6 x x x x x x x 8 x x x x x x x x x x x x x x x x x x x x x x x X x x x x x x M x M EES (Con t) 1 W 24 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 36 x UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX (Con t) Page 24

27 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/ M x FE EES 1 W 4 x x x 4 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x M x M / M x FE COSSES 1 M X M W M X FE 6 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x UC EGISEED DEMK OF S PIPE PODUCS Page 25 S PIPE PODUCS OUSON COPOE O FEE FX

28 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/ S M x PE x M EES 1 S W 4 x x x x x x x x x x x " - 24" 2" - 24" 30" - 48" 30" - 48" M SOID SEEVES SO SEEVES ONG SEEVES 1 W 2 W SO ONG 2 CPS PUGS ID ID M CPS & PUGS (SOID O PPED) MX. P CPS W PUGS ½ *hreads in ccordance with NSI/SME M DU PUPOSE SEEVES W/ OVE GNDS PIPE (I.D.) SO ONG 1 W 2 W UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 26

29 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/21.10 Y2 1 Y1 45 M ES 1 Y1 Y2 W 3 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (Con t) 45 M ES (Con t) 1 Y1 Y2 W 30 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x PSI pressure rating UC EGISEED DEMK OF S PIPE PODUCS Page 27 S PIPE PODUCS OUSON COPOE O FEE FX

30 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/ EDUCES M x M SE E M x FE FE x M PE x PE ECCENIC 1 W W W 3 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x W W W W (Con t) UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 28

31 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/21.10 EDUCES (con t) M x M SE E M x FE FE x M PE x PE ECCENIC 1 W W W 36 x x x x x x W W W W 1 M PPED EE MX P W 4 x x x x x x x x hreads in ccordance with NSI/SME NGENI EE 1 W 20 x x x x M PPED COSS MX P W 4 x x x x x x x x hreads in ccordance with NSI/SME M x SWIVE YDN EES W/ SWIVE GND 1 W 6 x x x x x x x x x UC EGISEED DEMK OF S PIPE PODUCS Page 29 S PIPE PODUCS OUSON COPOE O FEE FX

32 Utility Pipe Fittings and ccessories Full ody M Fittings NSI/WW C110/21.10 SWIVE x SOID YDN DPE W 4 x x x x x x x x x x x SWIVE GNDS W -ED OS 4 8 (2) 3/4 x 3 1/ (2) 3/4 x 3 1/ (2) 3/4 x 3 1/ (2) 3/4 x 4 SWIVE x SWIVE YDN E W/ 2 SWIVE GNDS W UC EGISEED DEMK OF S PIPE PODUCS S PIPE PODUCS OUSON COPOE O FEE FX Page 30

4" - 24" DUCIE ION PUS-ON OIN COMPC FIINGS GENE SPECIFICIONS MEI: PESSUE: ESING: Ductile iron per SM 536 350 PSI rating for 4" - 24" sizes.

33 4" - 24" DUCIE ION PUS-ON OIN COMPC FIINGS GENE SPECIFICIONS MEI: PESSUE: ESING: Ductile iron per SM PSI rating for 4" - 24" sizes. Pressure rating applies to fittings only and does not apply to restraining lugs or external restrainers In accordance with NSI/WW C153/21.53 and U requirements Compact Push-On Fittings NSI/WW C153/21.53 YING ENG: In accordance with NSI/WW C153/21.53 (fittings not listed in NSI/WW have dimensions per Star design as noted in the catalog) WEIGS: FNGES: CEMEN INING: COING: re in pounds, unless noted otherwise and do not include accessories, cement lining and coating Flanged ends on fittings match NSI/WW C115/21.15 and NSI 16.1 class 125 flanges In accordance with NSI/WW C104/ sizes 4" - 24" double thickness. Click here for a pressure jetting discussion or visit /pressure_cleaning_guidelines.asp. sphaltic seal coat inside and out in accordance with NSI/WW C104/21.4 and referenced in NSI/WW C153/21.53 GSKES: Dual hardness S in accordance with NSI/WW C111/21.11 (see pg. 37) Utility Pipe Fittings and ccessories PPOVS: DIMENSIONS: INSION: 4" - 12" U/UC isted 4" and greater are U/NSI/NSF Standards 61 and 372 4" - 12" FM pproved. Please consult factory for detail listing and approvals. ll dimensions are in inches unless noted otherwise. (Click here for a short commentary on non-pressure sewer applications or visit /non-pressure_sewer_applications.asp. eview commentary before ordering or installing fittings for this application. Per NSI/WW C600 and C111 using DIP conforming to C150/C151 and PVC pipe conforming to C900/C905 C D C D 7/8 DI. 2 OES 7/8 DI. 2 OES.C. Ø.C. Ø MEME PPOVED 4"-12" S 14"-24" S PUS-ON OIN DIMENSIONS Ø.C. C D Please note: ll fittings are standard with two (2) restraining lugs. ends 45 & 90 in sizes 4" -12" are also available with four (4) restraining lugs. UC EGISEED DEMK OF S PIPE PODUCS Page 31 S PIPE PODUCS OUSON COPOE O FEE FX

2" - 64" DUCTILE IRON MECHANICAL JOINT COMPACT FITTINGS

2 - 64 DUCTILE IRON MECHANICAL JOINT COMPACT FITTINGS GENER SPECIFICIONS MERI: Ductile Iron per SM 536 PRESSURE: ESING: 350 PSI rating for 2" - 24" sizes, 250 PSI rating for 30" - 48" sizes and 150 PSI rating for 54" - 64" sizes In accordance with NSI/WW