WORKSURFACES. November 2018 Price List

Transcription

1 WORKSURFACES November 2018 Price List

2 This page intentionally left blank.

3 UNIVERSAL WORKSURFACES TALE OF CONTENTS PRODUCT INFORMATION Universal Worksurfaces Statement of Line 5 Universal Worksurface Finish Options 7 Universal Worksurfaces Product Details 8 Universal Worksurfaces Grommet Specifications 9 Worksurfaces Rectangular Worksurfaces 12 Rectangular Worksurfaces for Height Adjustable Tables System Specific Extended Rectangular Worksurfaces 15 System Specific ullpen Surfaces 17 Rectilinear and Extended Rectilinear Corners 18 Extended Rectilinear D-Tops 19 Curvilinear Corners 20 Cockpit Corners 21 Extended Curvilinear Corners 22 Extended Curvilinear D-Top Corners 23 D-Tops and P-Tops 24 System Specific Spanner Half Moons 25 System Specific Spanner Pies 26 Transactions, Crescents, Rounds, Half Rounds and Quarter Rounds 27 Fins and Racetracks 28 Sweeps 29 Corner Keyboard, Corner Keyboard Insert Tray, Positon Mate Mechanism 30 Corners 31 Extended Corners 32 Extended Corners 33 Returns and Pies 35 and 60 Spanner Pies and Pies Corners Extended Corners 38 Shelf Surfaces and Rectangular / Transactions 39 System Specific Corner Transactions 40 and 135 Corner Transaction Tops 41 Rectangular Worksurfaces with Perimeter Cut-Outs 42 Matrix HiLo Rectangular Transition Tops and Grommet Hole Covers 43 WARRANTY & TERMS AND CONDITIONS For Warranty & Terms and Conditions please visit: 3

4 This page intentionally left blank.

5 UNIVERSAL WORKSURFACES STATEMENT OF LINE 2mm Edge Worksurfaces WORKSURFACES 2MM EDGE WORKSURFACES Rectangular Worksurfaces Extended Rectilinear Corners Left or Right Hand Extended Rectangular Worksurfaces System Specific Extended Rectilinear D-Top Corners Left or Right Hand ullpen Surfaces System Specific Curvilinear Corners Type A Standard Curvilinear Corners Type Depth Transition Curvilinear Corners Type Extended Curvilinear D-Top Corners D-Top Spanner Pies Open Frame Elliptical Transaction Open Frame Rectangular Transaction Rounds Half Round Quarter Round Sweeps Corner Keyboard Standard C, L, R Corner P-Top Spanner Half Moons System Specific System Specific Crescent Left or Right Hand Extended Curvilinear Corners Cockpit Corner Returns Racetrack Depth Transition Rectilinear Corners Type Left or Right Hand Cockpit Corner Left or Right Hand Standard Rectilinear Corners Type Left or Right Hand Left or Right Hand Left or Right Hand Left or Right Hand System Specific System Specific Fins Left or Right Hand Depth Transition C, L, R Corner Left or Right Hand 5

6 STATEMENT OF LINE 2mm Edge Worksurfaces UNIVERSAL WORKSURFACES 2MM EDGE WORKSURFACES C, L, R Corner C, L, R Corner C, L, R Corner Standard C, L, R Extended Corner Left or Right Hand Depth Transition C, L, R Extended Corner Left or Right Hand C, L, R Extended Corner Left or Right Hand C, L, R Extended Corner Left or Right Hand C, L, R Extended Corner Left or Right Hand L, R Return L, R Return 60 Spanner Pie System Specific Spanner Pie System Specific Pie Standard 135 C, L, R Corner Depth Transition 135 C, L, R Corner Left or Right Standard 135 C, L, R Extended Corner Left or Right Hand Depth Transition 135 C, L, R Extended Corner Left or Right Hand Shelf Surface Rectangular Transaction Transaction Corner Transaction System Specific Corner Transaction Top System Specific 135 Corner Transaction Top System Specific Rectangular Worksurface w/ Perimeter Cut-Outs Center, Left or Right Hand Matrix HiLo Rectangular Transaction Tops One or Two Sided 6

7 UNIVERSAL WORKSURFACES FINISH OPTIONS Worksurface Options WORKSURFACE LAMINATE OPTIONS WORKSURFACE LAMINATE OPTIONS Name Grade Name Grade Absolute Acajou A Natural Tigris Aimtoo Savatre A Pearl Soapstone lack A Pewter Mesh razilwood A Satin Oxide Cabinet Almond A Shadow Chalk A Shadow Zephyr Corporate Walnut A Soft Gold Mesh Dark Rum Cherry A Streets of San Francisco Grand Cherry A Sunset Leave Likatre A Tungsten EV Looks Likatre A White Spektrum Midwest Maple A White Tigris Nightfall A Windswept Pewter Paris White Potterware A Yorkshire Cherry Recon Oak A Antique White Storm A lue C Summer Drops A Ebony C Titanium EV A Frosty White (Writable Surface) C True White A Oiled Olivewood C Trytoo Savatre A Orange C Asian Night Pecan Woodline C Asian Sand Red C eige Granite Ribbonwood Ashen C Carbon EV Ribbonwood Ebony C Colombian Walnut Ribbonwood Myriad C Desert Zephyr Satin Stainless C Figured Mahogany Strand urnt C Fonthill Pear Strand Wenge C Green Soapstone Strand Wheat C Grey Mesh Twill Earthen C Gridlock in L.A. Twill Graphite C Hampton Walnut Twill Sarum C Khaki rown Violet C Loden Zephyr Warm White C Madagascar Yellow C Mahogany Clove Zebrano C Monticello Maple EDGEAND OPTIONS EDGEAND OPTIONS Name Color Code Grade Absolute Acajou AA A Aimtoo Savatre AS A lack K A razilwood Z A Cabinet Almond CA A Chalk CK A Corporate Walnut CT A Dark Rum Cherry DR A Dark Tone DT A Grand Cherry GC A Grey Value 1 GV1 A Innertone HT A Leave Likatre LV A Name Color Code Grade Light Tone LT A Looks Likatre LK A Medium Tone MT A Midwest Maple MM A Nightfall NF A Recon Oak RC A Satin White / True White SW / TW A Storm ST A Summer Drops SD A Trytoo Savatre TS A Warm rown 1 W A Woodrose WR A Custom Edgeband Options A $450 net edge match fee will be assessed to custom match non-standard edgeband. Minimum order size for any custom color is $75, list. Extended lead-time will apply. 7

8 PRODUCT DETAILS Universal Worksurfaces Product Details UNIVERSAL WORKSURFACES Product Detail 1 2mm Edge Details 2 mm edge banding (approximately 3/32 ) is made of rigid, dent resistant PVC. Impregnated colors match panel trim colors and help to reduce visible scratches. Edges are rounded/ beveled for comfort. 2mm edging is available on all worksurface shapes. All surfaces shown are 2mm unless noted otherwise. 1/8" radius 1 1/16" 2mm Edge acker Particle oard Product Detail 2 Worksurfaces for Height Adjustable Tables Worksurfaces for Height Adjustable Tables require a 1 gap on all sides to prevent pinch points. When placing two Worksurfaces for Height Adjustable Tables side-by-side each worksurface requires the 1 gap resulting in a 2 gap between worksurfaces. See examples below. 8

9 UNIVERSAL WORKSURFACES PRODUCT DETAILS Universal Worksurfaces Grommet Specifications RECTANGULAR GROMMET OPTIONS Option Location List A No Grommets - Location C Location D Location E Locations 2 and F Locations 1, 2 and G Locations 1 and H Locations 1 and Center CORNER GROMMET OPTIONS Option Location List A No Grommets - Location 1 (Default) - C Location 1 and D Location 1 and E Locations 1, 2 and Applies to: Rectangulars, Extended Rectangulars, Cockpit Returns, Returns Applies to: All Corners (Rectilinears, Curvilinears, Depth Transitions, Cockpit Corners, Corners, 135 Corners, Corner Keyboards) EXTENDED LEFT HAND CORNER GROMMET OPTIONS Option Location List A No Grommets - Location 1 (Default) - C Location 1 and D Location 1 and E Locations 1 and 3* +38 F Locations 1, 2 and G Locations 1, 3 and 4* +76 *Available on 72 Wide only. EXTENDED RIGHT HAND CORNER GROMMET OPTIONS Option Location List A No Grommets - Location 1 (Default) - C Location 1 and D Location 1 and E Locations 1 and 3* +38 F Locations 1, 2 and G Locations 1, 3 and 4* +76 *Available on 72 Wide only. 18" " 3.5" Applies to: All Extended Left Hand Corners (Rectilinears, Curvilinears, Depth Transitions, Corners, 135 Corners). Excludes all Extended D-Tops. 3. 5" Applies to: All Extended Right Hand Corners (Rectilinears, Curvilinears, Depth Transitions, Corners, 135 Corners). Excludes all Extended D-Tops. Grommet holes are 2 3/4 outside diameter with a 2 5/8 inside diameter (inside sleeve). Grommet covers are available in either grey or black and are included with grommet options. Grommet covers may also be purchased separately. 9

10 PRODUCT DETAILS Grommet Specifications UNIVERSAL WORKSURFACES D-TOP GROMMET OPTIONS Option Location List A No Grommets - Location C Location D Locations 1 and P-TOP GROMMET OPTIONS Option Location List A No Grommets - Location C Location D Locations 1 and Center 1 2 Center " 20" 3. 5" 24" Applies to: D-Tops Applies to: P-Tops FIN GROMMET OPTIONS Option Location List A No Grommets - Location Applies to: Fins Grommet holes are 2 3/4 outside diameter with a 2 5/8 inside diameter (inside sleeve). Grommet covers are available in either grey or black and are included with grommet options. Grommet covers may also be purchased separately. 10

11 UNIVERSAL WORKSURFACES PRODUCT DETAILS Grommet Specifications EXTENDED LEFT HAND D-TOP GROMMET OPTIONS Option Location List A No Grommets - Location 1 (Default) - C Locations 1 and D Location E Location F Locations 2 and G Locations 1 and H Location EXTENDED RIGHT D-TOP GROMMET OPTIONS Option Location List A No Grommets - Location 1 (Default) - C Locations 1 and D Location E Location F Locations 2 and G Locations 1 and H Location " 20" " 3 4 Center Center " 2 2 Applies to: Extended Left Hand D-Tops Applies to: Extended Right Hand D-Tops LEFT HAND SWEEP GROMMET OPTIONS Option Location List A No Grommets - Location 1 (Default) - C Locations 1 and D Locations 1 and E Locations 2 and F Locations 1, 2 and RIGHT HAND SWEEP GROMMET OPTIONS Option Location List A No Grommets - Location 1 (Default) - C Locations 1 and D Locations 1 and E Locations 2 and F Locations 1, 2 and Center Center " Applies to: Left Hand Sweeps Applies to: Right Hand Sweeps Grommet holes are 2 3/4 outside diameter with a 2 5/8 inside diameter (inside sleeve). Grommet covers are available in either grey or black and are included with grommet options. Grommet covers may also be purchased separately. 11

12 WORKSURFACES UNIVERSAL WORKSURFACES Rectangular Worksurfaces DEEP RECTANGULAR WORKSURFACES D W Model Number List W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS DEEP RECTANGULAR WORKSURFACES D W Model Number List W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS DEEP RECTANGULAR WORKSURFACES D W Model Number List W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS3084 1, W-WS3096 1, DEEP RECTANGULAR WORKSURFACES D W Model Number List W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS3678 1, W-WS3684 1, W-WS3696 1, Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. It is highly recommened that a center support be used on all worksurfaces greater than 48 width. When spanning panel connections with a worksurface greater than 48 wide, an additional center cantilever is recommended for added support. Otherwise, a U-channel is recommended for additional center worksurface support. It is not recommended that 36, 42 and 48 deep worksurfaces be cantilevered to panels. If these size depths must be panel hung. it is highly recommended that an additional front support, such as a combination leg or full laminate support panel, also be specified. 12

13 UNIVERSAL WORKSURFACES WORKSURFACES Rectangular Worksurfaces 42 DEEP RECTANGULAR WORKSURFACES D W Model Number List W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS4272 1, W-WS4284 1, W-WS4296 1, DEEP RECTANGULAR WORKSURFACES D W Model Number List W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS4884 1, W-WS4896 1, Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. It is highly recommened that a center support be used on all worksurfaces greater than 48 width. When spanning panel connections with a worksurface greater than 48 wide, an additional center cantilever is recommended for added support. Otherwise, a U-channel is recommended for additional center worksurface support. It is not recommended that 36, 42 and 48 deep worksurfaces be cantilevered to panels. If these size depths must be panel hung. it is highly recommended that an additional front support, such as a combination leg or full laminate support panel, also be specified. 13

14 WORKSURFACES UNIVERSAL WORKSURFACES Rectangular Worksurfaces for Height Adjustable Tables RECTANGULAR WORKSURFACES FOR HEIGHT ADJUSTALE TALES W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS W-WS Selection Color Selection for 2mm Edge Grommet Location Color Selection for Grommet Cover Rectangular Worksurfaces for Height Adjustable Tables have a 1 1 /8 thickness. Height adjustable worksurface support base is specified separately. Grommet holes with covers are specified as options. These worksurfaces are for use with height adjustable table bases only. Worksurfaces for Height Adjustable Tables require a 1 gap around to prevent pinch points. See example in Product Details. 14

15 UNIVERSAL WORKSURFACES WORKSURFACES System Specific Extended Rectangular Worksurfaces The following worksurface is designed for use with Matrix systems only: MATRIX SYSTEM EXTENDED RECTANGULAR WORKSURFACE D W Model Number List /4 W-WSE2424MX /4 W-WSE2430MX /4 W-WSE2436MX /4 W-WSE2442MX /4 W-WSE2448MX /4 W-WSE2454MX /4 W-WSE2460MX /4 W-WSE2466MX /4 W-WSE2472MX /4 W-WSE2484MX /4 W-WSE3024MX /4 W-WSE3030MX /4 W-WSE3036MX /4 W-WSE3042MX /4 W-WSE3048MX /4 W-WSE3054MX /4 W-WSE3060MX /4 W-WSE3066MX /4 W-WSE3072MX /4 W-WSE3084MX 1, The following worksurface is designed for use with MWall/Divi systems only: MWALL AND DIVI SYSTEM EXTENDED RECTANGULAR WORKSURFACE D W Model Number List /16 W-WSE2424MW /16 W-WSE2430MW /16 W-WSE2436MW /16 W-WSE2442MW /16 W-WSE2448MW /16 W-WSE2454MW /16 W-WSE2460MW /16 W-WSE2466MW /16 W-WSE2472MW /16 W-WSE2484MW /16 W-WSE3024MW /16 W-WSE3030MW /16 W-WSE3036MW /16 W-WSE3042MW /16 W-WSE3048MW /16 W-WSE3054MW /16 W-WSE3060MW /16 W-WSE3066MW /16 W-WSE3072MW /16 W-WSE3084MW 1, Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. Extended rectangulars are designed to compensate for the gap created when a panel is inserted into a panel run at a 3-way connection. e sure to order worksurface that corresponds to the system you are specifying. It is highly recommended that a center support be used on all worksurfaces greater than 48 wide. When spanning panel connections with a worksurface greater than 48 wide, an additional center cantilever is recommended for added support. Otherwise a U-Channel is recommended for additional center worksurface support. 15

16 WORKSURFACES System Specific Extended Rectangular Worksurfaces UNIVERSAL WORKSURFACES The following worksurface is designed for use with AO2 systems only: AO2 SYSTEM EXTENDED RECTANGULAR WORKSURFACES D W Model Number List /4 W-WSE2424HM /4 W-WSE2430HM /4 W-WSE2436HM /4 W-WSE2442HM /4 W-WSE2448HM /4 W-WSE2454HM /4 W-WSE2460HM /4 W-WSE2466HM /4 W-WSE2472HM /4 W-WSE2484HM /4 W-WSE3024HM /4 W-WSE3030HM /4 W-WSE3036HM /4 W-WSE3042HM /4 W-WSE3048HM /4 W-WSE3054HM /4 W-WSE3060HM /4 W-WSE3066HM /4 W-WSE3072HM /4 W-WSE3084HM 1, Selection Color Selection for 2mm Edge Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. Extended rectangulars are designed to compensate for the gap created when a panel is inserted into a panel run at a 3-way connection. e sure to order worksurface which corresponds to the system you are specifying. It is highly recommended that a center support be used on all worksurfaces greater than 48 wide. When spanning panel connections with a worksurface greater than 48 wide, an additional center cantilever is recommended for added support. Otherwise a U-Channel is recommended for additional center worksurface support. 16

17 UNIVERSAL WORKSURFACES WORKSURFACES System Specific ullpen Surfaces D The following worksurface is designed for use with MWall systems only: W MWALL ULLPEN SURFACES Number of Panels Model Number List /16 1 W-WSMW /16 1 W-WSMW /16 1 W-WSMW /16 1 W-WSMW /16 1 W-WSMW /8 2 W-WSMW /8 1 W-WSMW2460A /8 2 W-WSMW /8 2 W-WSMW /8 2 W-WSMW2472A /16 3 W-WSMW /8 2 W-WSMW2478A /16 3 W-WSMW /16 2 W-WSMW2484A /16 3 W-WSMW /16 1 W-WSMW /16 1 W-WSMW /16 1 W-WSMW /16 1 W-WSMW /16 1 W-WSMW /8 2 W-WSMW /8 1 W-WSMW3060A /8 2 W-WSMW /8 2 W-WSMW /8 2 W-WSMW3072A /16 3 W-WSMW /8 2 W-WSMW3078A /16 3 W-WSMW /16 2 W-WSMW3084A 1, /16 3 W-WSMW3084 1, D The following worksurface is designed for use with Divi systems only: W DIVI ULLPEN SURFACES Number of Panels Model Number List /8 1 W-WSDV /8 1 W-WSDV /8 1 W-WSDV /8 1 W-WSDV /8 1 W-WSDV /4 2 W-WSDV /8 1 W-WSDV2460A /4 2 W-WSDV /4 2 W-WSDV /4 2 W-WSDV2472A /8 3 W-WSDV /4 2 W-WSDV2478A /8 3 W-WSDV /4 2 W-WSDV2484A /8 3 W-WSDV /8 1 W-WSDV /8 1 W-WSDV /8 1 W-WSDV /8 1 W-WSDV /8 1 W-WSDV /4 2 W-WSDV /8 1 W-WSDV3060A /4 2 W-WSDV /4 2 W-WSDV /4 2 W-WSDV3072A /8 3 W-WSDV /4 2 W-WSDV3078A /8 3 W-WSDV /4 2 W-WSDV3084A 1, /8 3 W-WSDV3084 1, Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Grommet holes with covers are specified as options. ullpen Rectangular surfaces are designed to compensate for the gap created by natural panel creep for system specific (MWall or Divi) panels only. It is highly recommended that a center support be used on all workspaces greater than 48 wide. When spanning panel connections with a worksurface greater than 48 wide, an additional center cantilever is recommened for added support. Otherwise a U-Channel is recommended for addtiional center worksurface support. 17

18 WORKSURFACES UNIVERSAL WORKSURFACES Rectilinear and Extended Rectilinear Corners STANDARD RECTILINEAR CORNER TYPE D 1 W 1 F Model Number List W-WSC W-WSC W-WSC W-WSC W-WSC DEPTH TRANSITION RECTILINEAR CORNER TYPE Hand D 1 D 2 W 1 F Model Number List Left W-WSC Left W-WSC Right W-WSC Right W-WSC F F F Depth Transition Left Depth Transition Right Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. EXTENDED RECTILINEAR LEFT HAND CORNERS D 1 W 1 W 2 F Model Number List W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE EXTENDED RECTILINEAR RIGHT HAND CORNERS D 1 W 1 W 2 F Model Number List W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE W-WSCE F F Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 18

19 UNIVERSAL WORKSURFACES WORKSURFACES Extended Rectilinear D-Tops EXTENDED RECTILINEAR LEFT HAND D-TOP CORNERS D 1 D 2 W 1 W 2 F Model Number List W-WSCDL W-WSCDL , W-WSCDL , W-WSCDL , W-WSCDL W-WSCDL , W-WSCDL , W-WSCDL , W-WSCDL W-WSCDL , W-WSCDL , W-WSCDL , W-WSCDL , W-WSCDL , W-WSCDL , W-WSCDL , EXTENDED RECTILINEAR RIGHT HAND D-TOP CORNERS D 1 D 2 W 1 W 2 F Model Number List W-WSCDR W-WSCDR , W-WSCDR , W-WSCDR , W-WSCDR W-WSCDR , W-WSCDR , W-WSCDR , W-WSCDR W-WSCDR , W-WSCDR , W-WSCDR , W-WSCDR , W-WSCDR , W-WSCDR , W-WSCDR , F F Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 19

20 WORKSURFACES Curvilinear Corners UNIVERSAL WORKSURFACES CURVILINEAR CORNER TYPE A W-WSCC W-WSCC STANDARD CURVILINEAR CORNER TYPE W-WSCC W-WSCC W-WSCC CURVILINEAR CORNER TYPE - DEPTH TRANSITION LEFT D 1 D 2 W 1 Model Number List W-WSCC W-WSCC CURVILINEAR CORNER TYPE - DEPTH TRANSITION RIGHT D 1 D 2 W 1 Model Number List W-WSCC W-WSCC Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 20

21 UNIVERSAL WORKSURFACES WORKSURFACES Cockpit Corners LEFT HAND COCKPIT CORNER RETURNS D 1 D 2 W 1 Model Number List W-WSCRL W-WSCRL W-WSCRL W-WSCRL W-WSCRL W-WSCRL W-WSCRL W-WSCRL96 1, RIGHT HAND COCKPIT CORNER RETURNS D 1 D 2 W 1 Model Number List W-WSCRR W-WSCRR W-WSCRR W-WSCRR W-WSCRR W-WSCRR W-WSCRR W-WSCRR96 1, COCKPIT CORNER W-WSCC Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 21

22 WORKSURFACES UNIVERSAL WORKSURFACES Extended Curvilinear Corners EXTENDED CURVILINEAR LEFT HAND CORNER D 1 W 1 W 2 Model Number List W-WSCCE W-WSCCE W-WSCCE W-WSCCE , W-WSCCE W-WSCCE W-WSCCE , W-WSCCE W-WSCCE , EXTENDED CURVILINEAR RIGHT HAND CORNER D 1 W 1 W 2 Model Number List W-WSCCE W-WSCCE W-WSCCE W-WSCCE , W-WSCCE W-WSCCE W-WSCCE , W-WSCCE W-WSCCE , Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 22

23 UNIVERSAL WORKSURFACES WORKSURFACES Extended Curvilinear D-Top Corners EXTENDED CURVILINEAR LEFT HAND D-TOP CORNERS D 1 D 2 W 1 W 2 Model Number List W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , W-WSCCDL , EXTENDED CURVILINEAR RIGHT HAND D-TOP CORNERS D 1 D 2 W 1 W 2 Model Number List W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , W-WSCCDR , Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 23

24 WORKSURFACES D-Tops and P-Tops UNIVERSAL WORKSURFACES D-TOPS W-WSD W-WSD W-WSD W-WSD W-WSD W-WSD W-WSD W-WSD P-TOPS Hand D 1 D 2 W 1 Model Number List Left W-WSPL Left W-WSPL Left W-WSPL Left W-WSPL3084 1, Right W-WSPR Right W-WSPR Right W-WSPR Right W-WSPR3084 1, Left Hand P-Top Right Hand P-Top Selection Additional Grommet Locations (+38) Grommet Cover Color (if applicable) Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 24

25 UNIVERSAL WORKSURFACES WORKSURFACES System Specific Spanner Half Moons The following worksurface is designed for use with Matrix systems only: MATRIX SPANNER HALF MOONS D 1 D 2 W 1 Model Number List / /16 W-WSHM2450MX / /16 W-WSHM3062MX The following worksurface is designed for use with Divi systems only: DIVI SPANNER HALF MOONS D 1 D 2 W 1 Model Number List / /8 W-WSHM2450DV / /4 W-WSHM3062DV The following worksurface is designed for use with MWall systems only: MWALL SPANNER HALF MOONS D 1 D 2 W 1 Model Number List / /2 W-WSHM2450MW / /2 W-WSHM3062MW The following worksurface is designed for use with AO2 systems only: AO2 SPANNER HALF MOONS D 1 D 2 W 1 Model Number List / /2 W-WSHM2450HM / /2 W-WSHM3062HM Selection Worksurface support hardware is specified separately. e sure to order worksurface which corresponds to the system you are specifying. 25

26 WORKSURFACES UNIVERSAL WORKSURFACES System Specific Spanner Pies The following worksurface is designed for use with Matrix systems only: MATRIX SPANNER PIES D 1 D 2 Model Number List /32 W-WSPI24MX /32 W-WSPI30MX The following worksurface is designed for use with Divi systems only: DIVI SPANNER PIES D 1 D 2 Model Number List /8 W-WSPI24DV /8 W-WSPI30DV The following worksurface is designed for use with MWall systems only: MWALL SPANNER PIES D 1 D 2 Model Number List /32 W-WSPI24MW /32 W-WSPI30MW The following worksurface is designed for use with AO2 systems only: AO2 SPANNER PIES D 1 D 2 Model Number List /2 W-WSPI24HM /2 W-WSPI30HM Selection Worksurface support hardware is specified separately. e sure to order worksurface which corresponds to the system you are specifying. 26

27 UNIVERSAL WORKSURFACES WORKSURFACES Transactions, Crescents, Rounds, Half Rounds and Quarter Rounds D 1 The following worksurface is designed for use with Matrix systems only: MATRIX OPEN FRAME ELLIPTICAL TRANSACTION Nominal Width Actual W 1 Model Number List W-CTMXEPT W-CTMXEPT W-CTMXEPT W-CTMXEPT W-CTMXEPT D 1 The following worksurface is designed for use with Matrix systems only: MATRIX OPEN FRAME RECTANGULAR TRANSACTION Nominal Width Actual W 1 Model Number List W-CTMX W-CTMX W-CTMX W-CTMX W-CTMX CRESCENT W-WSCTLCR ROUNDS W 1 Model Number List Swing Hole 30 C-TLR C-TLR C-TLR C-TLR HALF ROUND W-WSHM W-WSHM W-WSHM W-WSHM W-WSHM W-WSHM84 1, W-WSHM96 1, QUARTER ROUND D 1 Model Number List 24 W-WSPI W-WSPI W-WSPI W-WSPI W-WSPI Selection Worksurface support hardware is specified separately. e sure to order worksurface which corresponds to the system you are specifying. 27

28 WORKSURFACES UNIVERSAL WORKSURFACES Fins and Racetracks LEFT HAND FINS W-WSFINL W-WSFINL W-WSFINL W-WSFINL W-WSFINL RIGHT HAND FINS W-WSFINR W-WSFINR W-WSFINR W-WSFINR W-WSFINR W-WSFINL W-WSFINL W-WSFINL W-WSFINL W-WSFINL W-WSFINR W-WSFINR W-WSFINR W-WSFINR W-WSFINR RACETRACK C-TLC C-TLC C-TLC C-TLC3684 1, C-TLC3696 1, C-TLC C-TLC4272 1, C-TLC4284 1, C-TLC4296 1, C-TLC4860 1, C-TLC4872 1, C-TLC4884 1, C-TLC4896 1, Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Grommet holes with covers are specified as options, applies to fins only. Additional grommet holes with covers are specified as options. 28

29 UNIVERSAL WORKSURFACES WORKSURFACES Sweeps LEFT HAND SWEEPS D 1 W 1 W 2 Model Number List W-WSDSL W-WSDSL , W-WSDSL , W-WSDSL W-WSDSL , W-WSDSL , RIGHT HAND SWEEPS D 1 W 1 W 2 Model Number List W-WSDSR W-WSDSR , W-WSDSR , W-WSDSR W-WSDSR , W-WSDSR , Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Side center grommet hole with cover is included. Additional grommet holes with covers are specified as options. 29

30 WORKSURFACES UNIVERSAL WORKSURFACES Corner Keyboard, Corner Keyboard Insert Tray, Positon Mate Mechanism CORNER KEYOARD D 1 W 1 W 2 Model Number List W-WSCKC W-WSCKC W-WSCKC CORNER KEYOARD INSERT TRAY W-WSKT W-WSKT POSITION MATE MECHANISM Model Number List A-KEYP 1,353 Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. Position Mate Mechanism needs to be ordered in conjunction with Corner Keyboard Insert Tray. Quickship does not apply to Position Mate Mechanism. 30

31 UNIVERSAL WORKSURFACES WORKSURFACES Corners C, L, R CORNER W-WSYCC W-WSYCC W-WSYCC W-WSYCC W-WSYCC C, L, R CORNER - DEPTH TRANSITION Hand D 1 D 2 W 1 Model Number List Left W-WSYCC Left W-WSYCC Right W-WSYCC Right W-WSYCC Left Hand Corner Right Hand Corner C, L, R CORNER W-WSZYCC W-WSZYCC W-WSZYCC C, L, R CORNER W-WSYZCC W-WSYZCC W-WSYZCC C, L, R CORNER W-WSZCC W-WSZCC W-WSZCC W-WSZCC W-WSZCC W-WSZCC Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 31

32 WORKSURFACES Extended Corners UNIVERSAL WORKSURFACES STANDARD LEFT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSYCCE W-WSYCCE W-WSYCCE W-WSYCCE , W-WSYCCE , W-WSYCCE W-WSYCCE W-WSYCCE W-WSYCCE , W-WSYCCE W-WSYCCE W-WSYCCE , W-WSYCCE W-WSYCCE , W-WSYCCE , W-WSYCCE , W-WSYCCE , W-WSYCCE , W-WSYCCE , STANDARD RIGHT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSYCCE W-WSYCCE W-WSYCCE W-WSYCCE , W-WSYCCE , W-WSYCCE W-WSYCCE W-WSYCCE W-WSYCCE , W-WSYCCE W-WSYCCE W-WSYCCE , W-WSYCCE W-WSYCCE , W-WSYCCE , W-WSYCCE , W-WSYCCE , W-WSYCCE , W-WSYCCE , Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 32

33 UNIVERSAL WORKSURFACES WORKSURFACES Extended Corners DEPTH TRANSITION LEFT C, L, R EXTENDED CORNER D 1 D 2 W 1 W 2 Model Number List W-WSYCE W-WSYCE W-WSYCE W-WSYCE , W-WSYCE , W-WSYCE W-WSYCE , W-WSYCE , W-WSYCE , W-WSYCE , W-WSYCE , W-WSYCE , DEPTH TRANSITION RIGHT C, L, R EXTENDED CORNER D 1 D 2 W 1 W 2 Model Number List W-WSYCE W-WSYCE W-WSYCE W-WSYCE , W-WSYCE , W-WSYCE W-WSYCE , W-WSYCE , W-WSYCE , W-WSYCE , W-WSYCE , W-WSYCE , LEFT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSZCCE W-WSZCCE W-WSZCCE W-WSZCCE , W-WSZCCE W-WSZCCE RIGHT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSZCCE W-WSZCCE W-WSZCCE W-WSZCCE , W-WSZCCE W-WSZCCE Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 33

34 WORKSURFACES Extended Corners UNIVERSAL WORKSURFACES LEFT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSYZCCE W-WSYZCCE W-WSYZCCE W-WSYZCCE , W-WSYZCCE W-WSYZCCE W-WSYZCCE W-WSYZCCE RIGHT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSYZCCE W-WSYZCCE W-WSYZCCE W-WSYZCCE , W-WSYZCCE W-WSYZCCE W-WSYZCCE W-WSYZCCE LEFT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSZYCCE W-WSZYCCE W-WSZYCCE W-WSZYCCE , W-WSZYCCE W-WSZYCCE W-WSZYCCE W-WSZYCCE RIGHT HAND C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSZYCCE W-WSZYCCE W-WSZYCCE W-WSZYCCE , W-WSZYCCE W-WSZYCCE W-WSZYCCE W-WSZYCCE Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 34

35 UNIVERSAL WORKSURFACES WORKSURFACES Returns and Pies L, R RETURN W-WSZLR W-WSZLR W-WSZLR W-WSZLR W-WSZLR W-WSZLR W-WSZLR W-WSZLR W-WSZLR W-WSZLR90 1, L, R RETURN W-WSZRR W-WSZRR W-WSZRR W-WSZRR W-WSZRR W-WSZRR W-WSZRR W-WSZRR W-WSZRR W-WSZRR90 1, Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 35

36 Woodgrain Direction Woodgrain Direction WORKSURFACES UNIVERSAL WORKSURFACES and 60 Spanner Pies and Pies The following worksurface is designed for use with Matrix systems only: MATRIX 60 SPANNER PIE D 1 Model Number List 24 W-WSZPI2460MX W-WSZPI3060MX The following worksurface is designed for use with Divi systems only: DIVI 60 SPANNER PIE D 1 Model Number List 24 W-WSZPI2460DV W-WSZPI3060DV The following worksurface is designed for use with Matrix systems only: MATRIX SPANNER PIE D 1 Model Number List 24 W-WSZPI24120MX W-WSZPI30120MX The following worksurface is designed for use with Divi systems only: DIVI SPANNER PIE D 1 Model Number List 24 W-WSZPI24120DV W-WSZPI30120DV PIE D 1 Model Number List 24 W-WSZPI W-WSZPI Selection Worksurface support hardware is specified separately. e sure to order worksurface which corresponds to the system you are specifying. 36

37 UNIVERSAL WORKSURFACES WORKSURFACES 135 Corners STANDARD 135 C, L, R CORNER DEPTH TRANSITION 135 C, L, R CORNER Hand D 1 D 2 W 1 Model Number List W-WSXCC W-WSXCC W-WSXCC W-WSXCC Left W-WSXCC Left W-WSXCC Right W-WSXCC Right W-WSXCC W-WSXCC Left Hand Corner Right Hand Corner Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 37

38 WORKSURFACES 135 Extended Corners UNIVERSAL WORKSURFACES LEFT HAND 135 C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE , W-WSXCCE , RIGHT HAND 135 C, L, R EXTENDED CORNER D 1 W 1 W 2 Model Number List W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE W-WSXCCE , W-WSXCCE , DEPTH TRANSITION LEFT 135 C, L, R CORNER D 1 D 2 W 1 W 2 Model Number List W-WSXCE W-WSXCE W-WSXCE W-WSXCE W-WSXCE , W-WSXCE , DEPTH TRANSITION RIGHT 135 C, L, R CORNER D 1 D 2 W 1 W 2 Model Number List W-WSXCE W-WSXCE W-WSXCE W-WSXCE W-WSXCE , W-WSXCE , Selection Additional Grommet Locations (+38) Grommet Cover Color Worksurface support hardware is specified separately. Rear corner grommet hole with cover is included. Additional grommet holes with covers are specified as options. 38

39 UNIVERSAL WORKSURFACES WORKSURFACES Shelf Surfaces and Rectangular / Transactions SHELF SURFACE W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT RECTANGULAR TRANSACTION W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT W-CT RADIUS TRANSACTION W-CT1524R W-CT1530R W-CT1536R W-CT1542R W-CT1548R W-CT1554R W-CT1560R W-CT1566R W-CT1572R W-CT1584R Selection Worksurface support hardware is specified separately. 39

40 WORKSURFACES System Specific Corner Transactions UNIVERSAL WORKSURFACES The following worksurface is designed for use with Matrix systems only: MATRIX CORNER TRANSACTION D 1 Panel W 1 Actual W 1 Model Number List /32 W-CTC1524MX /32 W-CTC1530MX /32 W-CTC1536MX The following worksurface is designed for use with MWall/Divi systems only: DIVI AND MWALL CORNER TRANSACTION D 1 Panel W 1 Actual W 1 Model Number List /32 W-CTC1524MW /32 W-CTC1530MW /32 W-CTC1536MW The following worksurface is designed for use with AO2 systems only: AO2 CORNER TRANSACTION D 1 Panel W 1 Actual W 1 Model Number List /4 W-CTC1524HM /4 W-CTC1530HM /4 W-CTC1536HM Selection Worksurface support hardware is specified separately. e sure to order worksurface which corresponds to the systems you are specifying. 40

41 UNIVERSAL WORKSURFACES WORKSURFACES and 135 Corner Transaction Tops D 1 The following worksurface is designed for use with Matrix systems only: MATRIX CORNER TRANSACTION TOP Panel W 1 Model Number List W-CTCZ1524MX W-CTCZ1530MX W-CTCZ1536MX D 1 The following worksurface is designed for use with Divi systems only: DIVI CORNER TRANSACTION TOP Panel W 1 Model Number List W-CTCZ1524DV W-CTCZ1530DV W-CTCZ1536DV D 1 The following worksurface is designed for use with Matrix systems only: MATRIX 135 CORNER TRANSACTION TOP Panel W 1 Model Number List W-CTCX1524MX W-CTCX1530MX W-CTCX1536MX D 1 The following worksurface is designed for use with Divi systems only: DIVI 135 CORNER TRANSACTION TOP Panel W 1 Model Number List W-CTCX1524DV W-CTCX1530DV W-CTCX1536DV Selection Worksurface support hardware is specified separately. e sure to order worksurface which corresponds to the systems you are specifying. 41

42 WORKSURFACES UNIVERSAL WORKSURFACES Rectangular Worksurfaces with Perimeter Cut-Outs RECTANGULAR WORKSURFACE WITH PERIMETER CUT-OUTS Centered Left Hand Right Hand D 1 W 1 Model Number Model Number Model Number List W-WSP1C2424 W-WSP1L2424 W-WSP1R W-WSP1C2430 W-WSP1L2430 W-WSP1R W-WSP1C2436 W-WSP1L2436 W-WSP1R W-WSP1C2442 W-WSP1L2442 W-WSP1R W-WSP1C2448 W-WSP1L2448 W-WSP1R W-WSP1C2454 W-WSP1L2454 W-WSP1R W-WSP1C2460 W-WSP1L2460 W-WSP1R W-WSP1C2466 W-WSP1L2466 W-WSP1R W-WSP1C2472 W-WSP1L2472 W-WSP1R W-WSP1C2478 W-WSP1L2478 W-WSP1R W-WSP1C2484 W-WSP1L2484 W-WSP1R W-WSP1C2496 W-WSP1L2496 W-WSP1R W-WSP1C3024 W-WSP1L3024 W-WSP1R W-WSP1C3030 W-WSP1L3030 W-WSP1R W-WSP1C3036 W-WSP1L3036 W-WSP1R W-WSP1C3042 W-WSP1L3042 W-WSP1R W-WSP1C3048 W-WSP1L3048 W-WSP1R W-WSP1C3054 W-WSP1L3054 W-WSP1R W-WSP1C3060 W-WSP1L3060 W-WSP1R W-WSP1C3066 W-WSP1L3066 W-WSP1R W-WSP1C3072 W-WSP1L3072 W-WSP1R W-WSP1C3078 W-WSP1L3078 W-WSP1R W-WSP1C3084 W-WSP1L3084 W-WSP1R3084 1, W-WSP1C3096 W-WSP1L3096 W-WSP1R3096 1, Centered Left Hand Right Hand Selection Worksurface support hardware is specified separately. It is highly recommened that a center support be used on all worksurfaces greater than 48 wide. When spanning panel connections with a worksurface greater than 48 wide, an additional center cantilever is recommended for added support. Otherwise, a U-Channel is recommended for additional center worksurface support. Centered cantilevers will prevent the installation of a Perimeter Unit. Perimeter cut-out area is unfinished with no edge band. Perimeter cut is spaced 3 from the edge of the surface. 42