GSA Contract Number: GS-28F-0005U

Transcription

1 GSA PRICING SCHEDULE: PRICE BOOK DATED January 1, 2013 GSA Contract Number: GS-28F-0005U Contract Period January 16, 2013 January 15, 2018 Special Item Numbers (S.I.N.) 711 1, Product Offered Mirage Discount Information 74.8% off list F.O.B. Origin $ 0 $ 250,000 list F.O.B. Destination $ 250,001 $ 500,000 list (48 continental states only) Minimum Order $ 100 net Maximum Order $ 500,000 net Discount is based on January 1, 2013 Price List Warranty Limited lifetime warranty, see price book for details Ordering and Payment Information include participating dealer name on the order: Unisource Office Furniture Parts, Inc Expressway Dr SW Unit D Grand Rapids, MI phone fax customerservice@unisourceparts.com Federal ID Number DUNS# January 1, 2013

2 TERMS AND CONDITIONS Mirage Product Lines ORDERING Price and Payment Prices stated in this price list do not include domestic freight. Pricing includes standard packaging only. Orders are invoiced at the time of shipment or at the time of first shipment in the case of multiple shipments. Payment is due within 30 days from date of invoice with approved credit, all other invoices will be due prior to shipment. In some cases, full or partial payment in advance or other adequate assurance of payment is required. Price and specifications subject to change without notice. Changes and Cancellations Taxes Any changes or cancellations on standard leadtime products must be in writing and approved by UniSource Office Furniture Parts, Inc. Approved cancellations for products will be subject to a minimum 25% cancellation charge if the request is approved within two weeks of scheduled shipping date. All cancellations must be approved in writing by UniSource Office Furniture Parts, Inc. If the Purchaser is tax exempt, it is the Purchaser's responsibility to furnish appropriate tax exempt certification. All applicable taxes are the Purchaser's responsibility and will be invoiced to the Purchaser. SHIPPING Shipment & Delivery All shipments will be FOB origin, unless otherwise quoted in writing. All orders will be shipped with freight charges added to the invoice. UniSource Office Furniture Parts, Inc.. will select the method of shipment, unless otherwise specified by Purchaser. If additional cost is incurred due to Purchaser's special request, the additional cost will be invoiced to Purchaser. All shipping leadtimes are subject to change without notice. Storage In the event Purchaser postpones delivery more than one week after the scheduled shipping date or after the goods have become work-in-progress, the company may transfer the goods to storage at the Purchaser's risk and expense. In such an event, a storage fee will be added to the Purchaser's invoice. Returns In general, all product is custom made to order and is considered non-returnable. Under certain circumstances, UniSource Office Furniture Parts, Inc. may authorize a specific return in writing. To request a return, call the Customer Service Department within 30 days of the invoice date. Once approved, you will receive a return authorization number (RGA #) and return documentaion to accompany the product, and further instructions. To avoid additional product reworking fees, goods must be appropriately packaged to ensure safe return. All returns are subject to a minimum 25% restocking charge, plus any additional freight charges. Damage All product is packaged in an approved manner. It is the customer's responsibility to inspect all merchandise immediately upon receipt. The customer must notify the carrier of the damages immediately. The customer is responsible for filing the freight claim with the delivering carrier within the legal deadlines. UniSource Office Furniture Parts, Inc. must be notified within 5 working days of any shortages, damages or defects which should be apparent by an inspection of the goods. Such notification allows for the prompt replacement of such materials. WARRANTY Warranty Uni-Source Office Furniture Parts, Inc. warrants its products to be free from defects in material and workmanship for a limited lifetime of the product from the date of initial delivery, with the following exceptions: Five (5) Years - Three (3) Years - Electrical Products. High wear parts such as veneers, 3mm & t-mold edging. All textiles/finishes, glides, keyboard mechanisms, pencil drawers, wood materials. Thirty (30) Days - Any Non-Standard or custom products, except COM fabrics. COM fabrics are not warranted in any manner. This warranty is made by UniSource Office Furniture Parts Inc., only to purchasers acquiring the product directly from UniSource Office Furniture Parts, Inc. or its authorized dealers. UniSource Office Furniture Parts, Inc.'s obligation and the purchaser's remedy pursuant to this warranty are limited to repair or replacement, at UniSource Office Furniture Parts, Inc.'s option, of parts which prove, under normal use, to be defective within the period stated. This remedy is expressly agreed to be exclusive as a condition of such replacement. No person, firm, or corporation is authorized to assume for UniSource Office Furniture Parts, Inc. any other liabiltiy in connection with UniSourceOffice Furniture Parts, Inc.'s products. There are no other warranties except as expressly set forth above, either expressed or implied, including any warranty of merchantability or fitness for any particular purpose. UniSource Office FurnitureParts, Inc.'s liability with respect to its products shall not exceed that expressly set forth above irrespective of the theory upon which any claim might be based including breach of contract, warranty, negligence, or strict liability on tort. Under no circumstances shall UniSource Office Furniture Parts, Inc. be liable for special, incidental, or consequential damages. This warranty does not apply to damages resulting from shipment, storage, accident, alteration, misuse, assembly or installation. All claims under this warranty must be made in writing prior to the repair or replacement of the product(s). 39 January 1, 2013

3 TERMS AND CONDITIONS PLACING AN ORDER How to Place An Order When ordering, please provide the following information in written form: 1. Purchase order number. 2. "Bill To" and "Ship To" name and address. 3. Complete product number. (i.e., HENH.6248DT) MIRAGE Example: HE N H 6248 DT AO2 Panel NonPowered Wire Management Color Height, Width Trim Color 4. Description, including fabric, laminate and trim colors. 5. Quantity. Customer's Own Material (COM) The Customer's Own Material (COM) program gives you the option of using textiles other than those listed in the price book. 1. Refer to the specific product pages in the price book to determine the yardage required for COM textiles. Yardage requirements are based on non-directional textiles. 66" wide textiles are needed for application on 60" wide products. Additional yardage may be needed due to the unique characteristics of a textile. 2. An acknowledgement will be sent upon receipt of your completed purchase order. The order processing will start upon the return of the signed order acknowledgement. 3. All COM fabric needs to be pre-approved prior to ordering. 4. Arrangements must be made for the textiles to be shipped from the supplier for application to the products. All textile packages must be tagged with labels that include the purchase order number, Customer Name, and the words: "COM Fabric," along with the assigned indentification number and the roll yardage quantity. CUSTOMER'S OWN MATERIAL 5. Any delay in delivery of COM fabric will result in a delay of your shipment. 6. Uni-Source Office Furniture Parts, Inc. does not warrant COM textiles. COM textiles are tested for application only; they are not tested for performance. 7. Suppliers of COM textiles are responsible for color consistency within commercial tolerances, UV stability, and resistance to soiling and perspiration. CUSTOMER'S OWN MATERIAL PRICING 8. There may be additional application charges for COM fabrics. Please contact Customer Service for information. 9. Ordering, shipping and payment of COM textile yardage are the responsibility of the customer and the textile supplier. Acknowledgments It is the purchaser's responsibility to check the acknowledgment document for accuracy, correct fabric and finish selections, etc. on all orders. It is also the purchaser's responsibility to immediately notify UniSource Office Furniture Parts, Inc. in writing of any problems or modifications needed to the acknowledge products. Once production has begun the product acknowledgement will become the order and any problems may result in specific costs to the purchaser. Deductions Deductions from invoices are not allowed for any reason without written authorization from UniSource Office Furniture Parts, Inc. All requests for deductions must be made in writing within 30 days of receipt of the product. After 30 days no deductions will be allow. A written acceptance of the deduction if approved will be sent to the purchaser by UniSource Office Furniture Parts, Inc.. The purchaser must provide written proof of acceptance in writing by UniSource Office Furniture Parts, Inc. prior to taking deductions on the bill. Local Codes UniSource Office Furniture Parts, Inc. considers its product to be office furniture and subject to all applicable local fire, electrical and building codes. SINCE LOCAL CODES VARY, THE PURCHASER IS RESPONSIBLE FOR THE PROPER APPLICATION AND INSTALLATION OF UNISOURCE OFFICE FURNITURE PARTS, INC.'S PRODUCT IN ACCORDANCE WITH THE REQUIREMENTS OF THESE LOCAL CODES. Engineering, research and testing have been conducted to have electrical components of UniSource Office Furniture Parts, Inc.'s products conform to national electrical codes. Only Underwriters Laboratories tested and approved electrical components of Uni-Source Office Furniture Parts, Inc.'s products conform to national electrical devices. In addition, some panels and components used by UniSource Office Furniture Parts, Inc. have been UL listed. UniSource Office Furniture Parts, Inc. shall not be responsible for any damages or expenses resulting from Purchaser's specifications not conforming to the requirements of the law or local building codes, unless it specifically agrees in writing to do so. Since UniSource Office Furniture Parts, Inc. has no control over the use to which others may put its products, each user, dealer or specifier should determine the products suitability for the particular application and local, state or national codes for their application. 40 January 1, 2013

4 MIRAGE INDEX MIRAGE PRODUCT TRIMS, FABRICS AND LAMINATES PAGE MIRAGE A2 PRODUCT A2 PANELS A2 CONNECTORS AND WALL MOUNTS A2 ENERGY COMPONENTS A2 WORK SURFACES A2 TABLES 85 A2 OVERHEAD STORAGE A2 TACKBOARDS 89 MIRAGE A1 PRODUCT A1 PANELS A1 PANEL CONNECTORS MIRAGE CORRESPONDING PRODUCT PEDESTALS STORAGE CABINETS, STORAGE TOWERS BOOKCASES, WARDROBE CABINETS LATERAL FILES TASKLIGHTS CORD MANAGER PAPER MANAGEMENT PENCIL DRAWER COMPUTER ACCESSORIES MARKER BOARDS DATA/VOICE COVERS & JACKS January 1, 2013

5 All Finishes on these two pages apply exclusively to the Mirage Product, the finishes for other products are listed in the specific price pages for those products. These finishes are not available on all items please see the specific item page for details and applications. FINISH AND TRIM MATRIX FOR MIRAGE PRODUCTS ONLY X-Must Specify O-Optional - Not Applicable Component Fabrics Paint Trim Raceway Trim Laminates Edge Band Trim OPTIONAL Panels X Panel Trim - X Panel Raceway - - X Connectors Connector Trim - X Connector Raceway - - X Electrical Receptacles - - Black Only Pass Through Power Entry X-RH/LH Power Poles - X-Lmtd Colors Worksurfaces Brackets - X Legs - X Top Only X X - WS With hardware - X - X X - Tables with bases - X - X X - Table Tops Only X X - Storage Shelves Open - X Flipper Door Units X X Flipper Door X X Metal Flipper Units - X Tackboards X Pedestals/Files - X Accessories - Black Only Available Paint Finishes: Color Code: Color: BU Black Umber DT Dark Tone HT Innertone LG Light Grey LT Light Tone MT Medium Tone Available Raceway Trim Finishes: Color Code: Color: B Black Umber D Dark Tone M Medium Tone Availability All Items shown above Limited items see individual products, Note Product can have upcharges, see individual items Limited items see individual products All Items shown above All Items shown above All Items shown above Availability All Raceway Trim on A2 Panels, not available on A1 Panels All Raceway Trim on A2 Panels, not available on A1 Panels, Note $25 per panel upcharge All Raceway Trim on A2 Panels, not available on A1 Panels Available Work Surface Edge Band Finishes: Color Code: Color: Availability BU DT HT LG LT MT Black Umber Dark Tone Innertone Light Grey Light Tone Medium Tone A1 T Edge and A2 3mm Edge A1 T Edge and A2 3mm Edge A1 T Edge and A2 3mm Edge A1 T Edge and A2 3mm Edge A1 T Edge and A2 3mm Edge A1 T Edge and A2 3mm Edge 42 January 1, 2013

6 FABRIC GRADES AND AVAILABILITY Prime Source M-F Eastern Time All Prime source products are available in the grades shown. Sample cards are not included in the UniSource binders, and may be ordered through our prime source supplier CF Stinson or on-line at NOTE: All Fabrics on Mirage are applied Railroaded, unless otherwise specified or 80/85 high products are used. Please contact Customer Service at for information Regarding COM Fabrics or specific fabric appearance due to direction. COM Fabrics are priced as Grade Q and are subject to approval, as not all fabrics will work, fabrics less then 66"w are subject to rejection. Please contact Customer Service for additional assistance. Fabrics must be panel grade, vertically stable fabrics.com Fabrics do not have a warranty. Patterns Grade Q Grade 1 Grade 2 Grade 3 Grade 4 Available All Colors Prime Axis Too Acclaim Asterisk Linea VS Genesis Counterpoint Brush Style Lumiere Reflectance Crossweave Galaxy Shoji Del Mar Isis Tally Encore Luther II Mira Prism Razzle Sightline Repetition Spiro & Rev Ringer Tussah Spree Nikko Imprint Dapple Array PLEASE NOTE: If you have a critical time shipment, please contact customer service with the specific color, pattern and pattern number to check current availability at time of order. LAMINATE, STANDARD OFFERINGS High Pressure Laminate-3mm Edge and T Edge Only ** Available on A2 3mm PVC and A1 T Edge tops only. You must Specify the Edge Band T Edge and 3mm Edge Band Options: BU, DT, HF, HT, LG, LT, MT Featuring Wilsonart Laminates. All pricing is for STANDARD PRICING GRADES ONLY. Additional patterns are available. Contact customer service for pricing and availability. If you have a project that is time sensitive, please contact customer service to verfiy availability. Solid Colors: Putty D Cloud D96-60 Shadow D30-60 Natural Almond D Pebble D91-60 Slate Grey D Platinum D72-60 Featherstone D Pepperdust D Wallaby ********All other "The Standard" Line Solid Wilsonart Patterns see Standard pricing grade and finish coating -60 only Patterns: Caldera Beige Grey Glace Green Tigris Natural Nebula White Nebula Evening Tigris Cloud Nebula Pampas Grey Nebula ********All other "The Standard" Line Solid Wilsonart Patterns see Standard pricing grade and finish coating -60 only Woodgrains: Wild Cherry Natural Pear Sanibel Maple Windsor Mahogany Golden Oak Nepal Teak Amber Cherry 7040A-60 Figured Mahogany Kennsington Maple Fusion Maple 7885T-60 English Oak Manitoba Maple 7110T-60 Montana Walnut ********All other "The Standard" Line Solid Wilsonart Patterns see Standard pricing grade and finish coating -60 only 43 January 1, 2013

7 A2 NONPOWERED FABRIC PANEL Product Description Fabric covered hard surface panel with nonpowered wire management attached. Includes (1) panel, (2) base covers & (1) metal base attached. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Width Panel face - Is fabric covered hard surface. Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Wire Management cavity - Provides for data and electrical distribution. Non-Powered Base Covers - Are standard and removable providing access for wire management. Powered Base Covers - May be specified IN LIEU of nonpowered base covers for use with data/voice jacks. Add $50 list per panel Data/Voice Jacks - Are available for use in nonpowered panels with -J Powered Raceway Covers and are available separately (Order in Accessories area) Actual Dimensions Depth (Thickness) 2" at top, 3 1/2" at raceway Width 12", 18", 24", 30", 36", 42", 48" & 60" Height (Minimum) 39", 47", 53", 62", 67" & 85" Wire Management 5" * Product number. * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Panel Connectors (Pgs ) separately. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Fabric yardage estimate is for directional application (minimum 66"width). * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 39 x 12 HENX.3912YY $329 $364 $400 $435 $ x 18 HENX.3918YY $348 $383 $418 $455 $ x 24 HENX.3924YY $356 $392 $427 $463 $ x 30 HENX.3930YY $395 $429 $493 $557 $ x 36 HENX.3936YY $451 $485 $549 $614 $ x 42 HENX.3942YY $480 $512 $576 $640 $ x 48 HENX.3948YY $506 $537 $602 $666 $ x 60 HENX.3960YY $640 $668 $733 $797 $ January 1, 2013

8 A2 NONPOWERED FABRIC PANEL * Product number. * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Panel Connectors (Pgs ) separately. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Fabric yardage estimate is for directional application (min 66" width). * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 47 x 12 HENX.4712YY $339 $386 $405 $463 $ x 18 HENX.4718YY $359 $405 $463 $481 $ x 24 HENX.4724YY $395 $443 $474 $492 $ x 30 HENX.4730YY $453 $497 $580 $618 $ x 36 HENX.4736YY $522 $566 $665 $685 $ x 42 HENX.4742YY $551 $592 $708 $745 $ x 48 HENX.4748YY $568 $608 $754 $761 $ x 60 HENX.4760YY $714 $751 $921 $904 $ x 12 HENX.5312YY $350 $396 $406 $481 $ x 18 HENX.5318YY $359 $416 $469 $502 $ x 24 HENX.5324YY $390 $425 $478 $510 $ x 30 HENX.5330YY $449 $484 $589 $655 $ x 36 HENX.5336YY $525 $577 $675 $749 $ x 42 HENX.5342YY $559 $612 $716 $783 $ x 48 HENX.5348YY $602 $653 $762 $825 $ x 60 HENX.5360YY $758 $805 $930 $977 $1, x 12 HENX.6212YY $364 $390 $439 $504 $ x 18 HENX.6218YY $426 $481 $530 $596 $ x 24 HENX.6224YY $470 $513 $539 $606 $ x 30 HENX.6230YY $500 $553 $667 $762 $ x 36 HENX.6236YY $589 $640 $754 $850 $ x 42 HENX.6242YY $634 $684 $797 $893 $ x 48 HENX.6248YY $682 $731 $845 $940 $ x 60 HENX.6260YY $858 $903 $995 $1,112 $1, x 12 HENX.6712YY $366 $423 $479 $537 $ x 18 HENX.6718YY $431 $487 $544 $601 $ x 24 HENX.6724YY $474 $518 $554 $612 $ x 30 HENX.6730YY $505 $558 $673 $775 $ x 36 HENX.6736YY $595 $646 $775 $862 $ x 42 HENX.6742YY $638 $688 $819 $905 $ x 48 HENX.6748YY $686 $735 $868 $952 $1, x 60 HENX.6760YY $862 $907 $1,016 $1,124 $1, x 12 HENX.8512YY $390 $486 $554 $623 $ x 18 HENX.8518YY $486 $580 $649 $717 $ x 24 HENX.8524YY $494 $588 $657 $726 $ x 30 HENX.8530YY $561 $654 $792 $929 $ x 36 HENX.8536YY $666 $756 $893 $1,031 $1, x 42 HENX.8542YY $715 $804 $941 $1,079 $1, x 48 HENX.8548YY $768 $856 $993 $1,130 $1, x 60 HENX.8560YY $901 $985 $1,122 $1,259 $1, January 1, 2013

9 A2 POWERED FABRIC PANEL Product Description Fabric covered hard surface panel with powered wire management attached. Includes (1) panel, (2) base covers, (2) outlet covers, (1) metal base attached & (1) electrical harness. Duplex receptacles and additional outlet covers must be ordered separately. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Panel face - Is fabric covered hard surface. Width Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Wire Management cavity - Provides for data and electrical distribution. Height Powered Base Covers - Are standard and removable to provide access to wire management cavity. Actual Dimensions Depth (Thickness) 2" at top, 3 1/2" at raceway Width 24", 30", 36", 42", 48" & 60" Height (Minimum) 39", 47", 53", 62", 67" & 85" Wire Management 5" 46 January 1, 2013

10 A2 POWERED FABRIC PANEL * Product number. * Includes Electrical Harness. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Panel Connectors (Pgs ) and Festoons (Pg. 34) separately. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Fabric yardage estimate is for directional application (min 66" width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 39 x 24 HEPX.3924YY $537 $555 $590 $627 $ x 30 HEPX.3930YY $576 $592 $656 $720 $ x 36 HEPX.3936YY $633 $647 $711 $775 $ x 42 HEPX.3942YY $663 $675 $740 $804 $ x 48 HEPX.3948YY $691 $701 $765 $830 $ x 60 HEPX.3960YY $826 $830 $894 $960 $1, x 24 HEPX.4724YY $551 $579 $617 $655 $ x 30 HEPX.4730YY $602 $628 $704 $780 $ x 36 HEPX.4736YY $672 $695 $771 $847 $ x 42 HEPX.4742YY $734 $754 $830 $906 $ x 48 HEPX.4748YY $754 $773 $849 $925 $ x 60 HEPX.4760YY $905 $916 $992 $1,068 $1, x 24 HEPX.5324YY $571 $587 $631 $674 $ x 30 HEPX.5330YY $609 $646 $731 $818 $ x 36 HEPX.5336YY $698 $730 $815 $901 $ x 42 HEPX.5342YY $745 $775 $860 $947 $ x 48 HEPX.5348YY $789 $817 $902 $987 $1, x 60 HEPX.5360YY $947 $967 $1,053 $1,139 $1, x 24 HEPX.6224YY $598 $635 $692 $749 $ x 30 HEPX.6230YY $655 $690 $794 $899 $ x 36 HEPX.6236YY $747 $777 $882 $986 $1, x 42 HEPX.6242YY $811 $838 $944 $1,048 $1, x 48 HEPX.6248YY $851 $875 $980 $1,086 $1, x 60 HEPX.6260YY $1,023 $1,040 $1,144 $1,249 $1, x 24 HEPX.6724YY $623 $659 $716 $773 $ x 30 HEPX.6730YY $686 $718 $827 $936 $ x 36 HEPX.6736YY $780 $808 $917 $1,026 $1, x 42 HEPX.6742YY $826 $852 $961 $1,069 $1, x 48 HEPX.6748YY $873 $898 $1,005 $1,114 $1, x 60 HEPX.6760YY $1,057 $1,071 $1,179 $1,288 $1, x 24 HEPX.8524YY $677 $750 $819 $888 $ x 30 HEPX.8530YY $746 $817 $953 $1,091 $1, x 36 HEPX.8536YY $812 $854 $1,057 $1,193 $1, x 42 HEPX.8542YY $905 $967 $1,105 $1,241 $1, x 48 HEPX.8548YY $958 $1,018 $1,156 $1,294 $1, x 60 HEPX.8560YY $1,095 $1,148 $1,286 $1,424 $1, January 1, 2013

11 A2 NONPOWERED FABRIC ACOUSTICAL PANEL Product Description Fabric covered sound-reducing panel with nonpowered wire management attached. Includes (1) panel, (2) base covers & (1) metal base attached. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Width Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Panel face - Is fabric covered sound-reducing surface. Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Wire Management cavity - Provides for data and electrical distribution. Non-Powered Base Covers - Are standard and removable providing access for wire management. Powered Base Covers - May be specified IN LIEU of nonpowered base covers for use with data/voice jacks. Add $50 list per panel Data/Voice Jacks - Are available for use in nonpowered panels and are specified SEPARATELY. Actual Dimensions Open Market Only Depth (Thickness) 2" at top, 3 1/2" at base Not on GSA Schedule Width 12", 18", 24", 30", 36", 42", 48" & 60" Height (Minimum) 53", 62", 67" & 85" Wire Management 5" * Product number. * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Panel Connectors (Pgs ) separately. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Fabric yardage estimate is for directional application (min 66" width). * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Special fabrics may affect yardage requirements. 48 January 1, 2013

12 A2 NONPOWERED FABRIC ACOUSTICAL PANEL * Product number. * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Panel Connectors (Pgs ) separately. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Fabric yardage estimate is for directional application (min 66" width). * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 53 x 12 HEANX.5312YY $464 $510 $553 $596 $ x 18 HEANX.5318YY $525 $568 $611 $653 $ x 24 HEANX.5324YY $533 $575 $618 $662 $ x 30 HEANX.5330YY $587 $627 $713 $798 $ x 36 HEANX.5336YY $664 $700 $786 $872 $ x 42 HEANX.5342YY $701 $736 $822 $908 $ x 48 HEANX.5348YY $742 $776 $861 $948 $ x 60 HEANX.5360YY $925 $951 $1,036 $1,123 $1, x 12 HEANX.6212YY $491 $535 $592 $649 $ x 18 HEANX.6218YY $538 $580 $637 $694 $ x 24 HEANX.6224YY $549 $591 $648 $706 $ x 30 HEANX.6230YY $597 $637 $742 $846 $ x 36 HEANX.6236YY $686 $723 $827 $932 $ x 42 HEANX.6242YY $718 $752 $858 $963 $1, x 48 HEANX.6248YY $761 $793 $898 $1,003 $1, x 60 HEANX.6260YY $938 $963 $1,068 $1,173 $1, Open Market Only 67 x 12 HEANX.6712YY $501 $544 $602 $660 $ x 18 HEANX.6718YY $549 $591 $648 $706 $ x 24 HEANX.6724YY $559 $601 $658 $715 $ x 30 HEANX.6730YY $614 $653 $762 $871 $ x 36 Not HEANX.6736YY on $696 GSA $731 Schedule $840 $948 $ x 42 HEANX.6742YY $729 $762 $871 $980 $1, x 48 HEANX.6748YY $777 $808 $917 $1,026 $1, x 60 HEANX.6760YY $949 $973 $1,082 $1,191 $1, x 12 HEANX.8512YY $545 $628 $697 $765 $ x 18 HEANX.8518YY $608 $688 $757 $825 $ x 24 HEANX.8524YY $616 $695 $763 $833 $ x 30 HEANX.8530YY $674 $750 $888 $1,025 $1, x 36 HEANX.8536YY $778 $850 $987 $1,125 $1, x 42 HEANX.8542YY $825 $894 $1,032 $1,170 $1, x 48 HEANX.8548YY $888 $955 $1,092 $1,230 $1, x 60 HEANX.8560YY $1,028 $1,090 $1,227 $1,364 $1, January 1, 2013

13 A2 POWERED FABRIC ACOUSTICAL PANEL Product Description Fabric covered sound-reducing panel with powered wire management attached. Includes (1) panel, (2) base covers, (2) outlet covers, (1) metal base attached & (1) electrical harness. Duplex receptacles and additional outlet covers must be ordered separately. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Panel face - Is fabric covered sound-reducing surface. Width Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Wire Management cavity - Provides for data and electrical distribution. Powered Base Covers - Are standard and removable to provide access to wire management cavity. Actual Dimensions Open Market Only Depth (Thickness) 2" at top, 3 1/2" at raceway Not on GSA Schedule Width 24", 30", 36", 42", 48" & 60" Height (Minimum) 53", 62", 67" & 85" Wire Management 5" * Product number. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Trim color YY (BU, DT, HT, HF, LG, LT, MT) 50 January 1, 2013

14 A2 POWERED FABRIC ACOUSTICAL PANEL * Product number. * Includes Electrical Harness. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Panel Connectors (Pgs ) and Festoons (Pg. 34) separately. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Fabric yardage estimate is for directional application (min 66" width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 53 x 24 HEAPX.5324YY $691 $740 $782 $825 $ x 30 HEAPX.5330YY $741 $789 $874 $961 $1, x 36 HEAPX.5336YY $817 $862 $948 $1,034 $1, x 42 HEAPX.5342YY $855 $900 $985 $1,071 $1, x 48 HEAPX.5348YY $894 $938 $1,025 $1,110 $1, x 60 HEAPX.5360YY $1,076 $1,114 $1,201 $1,286 $1, x 24 HEAPX.6224YY $709 $757 $814 $872 $ x 30 HEAPX.6230YY $762 $810 $915 $1,019 $1, x 36 HEAPX.6236YY $841 $886 $992 $1,096 $1, x 42 HEAPX.6242YY $874 $919 $1,024 $1,129 $1, x 48 HEAPX.6248YY $925 $968 $1,073 $1,178 $1, x 60 HEAPX.6260YY $1,088 $1,127 $1,232 $1,336 $1, Open Market Only Not on GSA Schedule 67 x 24 HEAPX.6724YY $715 $763 $821 $878 $ x 30 HEAPX.6730YY $768 $815 $923 $1,032 $1, x 36 HEAPX.6736YY $847 $892 $1,001 $1,110 $1, x 42 HEAPX.6742YY $883 $926 $1,035 $1,144 $1, x 48 HEAPX.6748YY $929 $971 $1,080 $1,189 $1, x 60 HEAPX.6760YY $1,098 $1,137 $1,246 $1,354 $1, x 24 HEAPX.8524YY $771 $858 $926 $995 $1, x 30 HEAPX.8530YY $827 $914 $1,051 $1,188 $1, x 36 HEAPX.8536YY $933 $1,016 $1,154 $1,292 $1, x 42 HEAPX.8542YY $976 $1,058 $1,195 $1,332 $1, x 48 HEAPX.8548YY $1,036 $1,118 $1,254 $1,392 $1, x 60 HEAPX.8560YY $1,164 $1,241 $1,379 $1,517 $1, January 1, 2013

15 A2 NONPOWERED FABRIC TACKABLE PANEL Product Description Fabric covered half tackable half hard surface panel with nonpowered wire management attached. Includes (1) panel, (2) base covers & (1) metal base attached. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Width Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Panel face - Is fabric covered half tackable (upper) half hard surface (lower). Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Wire Management cavity - Provides for data and electrical distribution. Non-Powered Base Covers - Are standard and removable providing access for wire management. Powered Base Covers - May be specified IN LIEU of nonpowered base covers for use with data/voice jacks. Add $40 list per panel Data/Voice Jacks - are available for use in nonpowered panels and are specified SEPARATELY. Actual Dimensions Open Market Only Depth (Thickness) 2" at top, 3 3/8" at base Not on GSA Schedule Width 12", 18", 24", 30", 36", 42", 48" & 60" Height (Minimum) 53", 62", 67" & 85" Wire Management 5" * Product number. * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Panel Connectors (Pgs ) separately. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Fabric yardage estimate is for directional application (min 66" width). * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Special fabrics may affect yardage requirements. 52 January 1, 2013

16 A2 NONPOWERED FABRIC TACKABLE PANEL * Product number. * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Panel Connectors (Pgs ) separately. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Fabric yardage estimate is for directional application (min 66" width). * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 53 x 12 HETNX.5312YY $591 $623 $678 $731 $ x 18 HETNX.5318YY $622 $672 $727 $781 $ x 24 HETNX.5324YY $655 $726 $779 $834 $ x 30 HETNX.5330YY $698 $786 $894 $1,001 $1, x 36 HETNX.5336YY $728 $835 $943 $1,050 $1, x 42 HETNX.5342YY $756 $882 $990 $1,097 $1, x 48 HETNX.5348YY $805 $949 $1,057 $1,163 $1, x 48 HETNX.5360YY $883 $1,065 $1,173 $1,279 $1, x 12 HETNX.6212YY $638 $668 $740 $811 $ x 18 HETNX.6218YY $674 $723 $795 $866 $ x 24 HETNX.6224YY $712 $781 $853 $923 $ x 30 HETNX.6230YY $759 $845 $977 $1,107 $1, x 36 HETNX.6236YY $795 $899 $1,031 $1,162 $1, x 42 HETNX.6242YY $830 $954 $1,086 $1,217 $1, x 48 HETNX.6248YY $883 $1,026 $1,157 $1,288 $1, x 60 HETNX.6260YY $973 $1,150 $1,281 $1,413 $1, Open Market Only 67 x 12 HETNX.6712YY $616 $668 $740 $811 $ x 18 HETNX.6718YY $674 $723 $795 $866 $ x 24 HETNX.6724YY $734 $781 $853 $923 $ x 30 HETNX.6730YY $802 $845 $981 $1,117 $1, x 36 Not HETNX.6736YY on $859 GSA $899 Schedule $1,035 $1,171 $1, x 42 HETNX.6742YY $917 $954 $1,090 $1,226 $1, x 48 HETNX.6748YY $991 $1,026 $1,162 $1,297 $1, x 60 HETNX.6760YY $1,146 $1,150 $1,286 $1,422 $1, x 12 HETNX.8512YY $698 $810 $895 $981 $1, x 18 HETNX.8518YY $787 $850 $935 $1,021 $1, x 24 HETNX.8524YY $850 $893 $979 $1,065 $1, x 30 HETNX.8530YY $973 $1,089 $1,261 $1,432 $1, x 36 HETNX.8536YY $1,017 $1,130 $1,301 $1,473 $1, x 42 HETNX.8542YY $1,054 $1,166 $1,338 $1,510 $1, x 48 HETNX.8548YY $1,118 $1,226 $1,398 $1,570 $1, x 60 HETNX.8560YY $1,215 $1,320 $1,492 $1,662 $1, January 1, 2013

17 A2 POWERED FABRIC TACKABLE PANEL Product Description Fabric covered half tackable half hard surface panel with powered wire management attached. Includes (1) panel, (2) base covers, (2) outlet covers, (1) metal base attached & (1) electrical harness. Duplex receptacles and additional outlet covers must be ordered separately. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Width Panel face - Is fabric covered half tackable (upper) half hard surface (lower). Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Wire Management cavity - Provides for data and electrical distribution. Powered Base Covers - Are standard and removable to provide access to wire management cavity. Actual Dimensions Open Market Only Depth (Thickness) 2" at top, 3 3/8" at base Not on GSA Schedule Width 24", 30", 36", 42", 48" & 60" Height (Minimum) 53", 62", 67" & 85" Wire Management 5" * Product number. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Trim color YY (BU, DT, HT, HF, LG, LT, MT) 54 January 1, 2013

18 A2 POWERED FABRIC TACKABLE PANEL * Product number. * Includes Electrical Harness. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Panel Connectors (Pgs ) and Festoons (Pg. 34) separately. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Fabric yardage estimate is for directional application (min 66" width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 53 x 24 HETPX.5324YY $781 $863 $917 $970 $1, x 30 HETPX.5330YY $826 $929 $1,035 $1,143 $1, x 36 HETPX.5336YY $863 $985 $1,091 $1,199 $1, x 42 HETPX.5342YY $897 $1,039 $1,146 $1,254 $1, x 48 HETPX.5348YY $950 $1,110 $1,218 $1,325 $1, x 60 HETPX.5360YY $1,039 $1,238 $1,345 $1,452 $1, x 24 HETPX.6224YY $819 $901 $973 $1,045 $1, x 30 HETPX.6230YY $866 $969 $1,099 $1,230 $1, x 36 HETPX.6236YY $918 $1,027 $1,158 $1,289 $1, x 42 HETPX.6242YY $1,057 $1,087 $1,218 $1,350 $1, x 48 HETPX.6248YY $1,103 $1,161 $1,293 $1,424 $1, x 60 HETPX.6260YY $1,314 $1,294 $1,425 $1,556 $1, Open Market Only Not on GSA Schedule 67 x 24 HETPX.6724YY $833 $915 $986 $1,058 $1, x 30 HETPX.6730YY $879 $985 $1,121 $1,257 $1, x 36 HETPX.6736YY $931 $1,046 $1,182 $1,318 $1, x 42 HETPX.6742YY $1,070 $1,107 $1,243 $1,380 $1, x 48 HETPX.6748YY $1,250 $1,317 $1,318 $1,454 $1, x 60 HETPX.6760YY $1,328 $1,440 $1,456 $1,592 $1, x 24 HETPX.8524YY $901 $1,025 $1,110 $1,195 $1, x 30 HETPX.8530YY $990 $1,225 $1,397 $1,569 $1, x 36 HETPX.8536YY $1,095 $1,271 $1,444 $1,616 $1, x 42 HETPX.8542YY $1,170 $1,316 $1,488 $1,658 $1, x 48 HETPX.8548YY $1,235 $1,381 $1,553 $1,725 $1, x 60 HETPX.8560YY $1,416 $1,484 $1,656 $1,827 $1, January 1, 2013

19 A2 NONPOWERED FABRIC HALF GLAZED PANEL Product Description Upper section glazed, lower section fabric covered hard surface panel with nonpowered wire management attached. Includes (1) panel, (2) base covers, & (1) metal base attached. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Width Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Glazed face - Is translucent acrylic c insert. Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Panel face - Is fabric covered hard surface. Wire Management cavity - Provides for data and electrical distribution. Non-Powered Base Covers - Are standard and removable providing access for wire management. 31" Powered Base Covers - May be specified IN LIEU of nonpowered base covers for use with data/voice jacks. Add $40 list per panel Data/Voice Jacks - are available for use in nonpowered panels and are specified SEPARATELY. Actual Dimensions Depth (Thickness) 2" at top, 3 3/8" at base Width 24", 30", 36", 42" & 48" Height (Minimum) 62", 67" & 85" Wire Management 5" 56 January 1, 2013

20 A2 NONPOWERED FABRIC HALF GLAZED PANEL HALF GLAZED FABRIC PANEL WITH CHOICE OF BRONZE OR CLEAR GLAZING * Product number. * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Panel Connectors (Pgs ) separately. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Fabric yardage estimate is for directional application (min 66" width). * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Special fabrics may affect yardage requirements. * Fabric name and style number. PANEL WITH BRONZE GLAZING DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 62 x 24 MEGBRNX.6224YY $1,253 $1,318 $1,376 $1,432 $1, x 30 MEGBRNX.6230YY $1,619 $1,685 $1,790 $1,895 $1, x 36 MEGBRNX.6236YY $1,679 $1,745 $1,850 $1,955 $2, x 42 MEGBRNX.6242YY $1,926 $1,992 $2,096 $2,201 $2, x 48 MEGBRNX.6248YY $1,975 $2,041 $2,145 $2,250 $2, x 24 MEGBRNX.6724YY $1,444 $1,510 $1,567 $1,625 $1, x 30 MEGBRNX.6730YY $1,663 $1,729 $1,837 $1,946 $2, x 36 MEGBRNX.6736YY $1,729 $1,794 $1,903 $2,012 $2, x 42 MEGBRNX.6742YY $1,969 $2,035 $2,143 $2,252 $2, x 48 MEGBRNX.6748YY $2,024 $2,090 $2,199 $2,307 $2, x 24 MEGBRNX.8524YY $1,636 $1,701 $1,770 $1,839 $1, x 30 MEGBRNX.8530YY $1,893 $1,959 $2,095 $2,233 $2, x 36 MEGBRNX.8536YY $1,979 $2,045 $2,182 $2,319 $2, x 42 MEGBRNX.8542YY $2,110 $2,176 $2,313 $2,451 $2, x 48 MEGBRNX.8548YY $2,308 $2,374 $2,511 $2,649 $2, PANEL WITH CLEAR GLAZING DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 62 x 24 MEGCLNX.6224YY $1,253 $1,318 $1,376 $1,432 $1, x 30 MEGCLNX.6230YY $1,619 $1,685 $1,790 $1,895 $1, x 36 MEGCLNX.6236YY $1,679 $1,745 $1,850 $1,955 $2, x 42 MEGCLNX.6242YY $1,926 $1,992 $2,096 $2, $2, x 48 MEGCLNX.6248YY $1,975 $2,041 $2,145 $2,250 $2, x 24 MEGCLNX.6724YY $1,444 $1,510 $1,567 $1,625 $1, x 30 MEGCLNX.6730YY $1,663 $1,729 $1,837 $1,946 $2, x 36 MEGCLNX.6736YY $1,729 $1,794 $1,903 $2,012 $2, x 42 MEGCLNX.6742YY $1,969 $2,035 $2,143 $2,252 $2, x 48 MEGCLNX.6748YY $2,024 $2,090 $2,199 $2,307 $2, x 24 MEGCLNX.8524YY $1,636 $1,701 $1,770 $1,839 $1, x 30 MEGCLNX.8530YY $1,893 $1,959 $2,095 $2,233 $2, x 36 MEGCLNX.8536YY $1,979 $2,045 $2,182 $2,319 $2, x 42 MEGCLNX.8542YY $2,110 $2,176 $2,313 $2,451 $2, x 48 MEGCLNX.8548YY $2,308 $2,374 $2,511 $2,649 $2, January 1, 2013

21 A2 POWERED FABRIC HALF GLAZED PANEL Product Description Upper section glazed, lower section fabric covered hard surface panel with powered wire management attached. Includes (1) panel, (2) base covers, (1) metal base attached, (1) electrical harness & (2) outlet covers. Duplex receptacles and additional outlet covers must be ordered separately. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Width Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Glazed face - Is translucent acrylic insert. Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Panel face - Is fabric covered hard surface. 31" Wire Management cavity - Provides for data and electrical distribution. Powered Base Covers - Are standard and removable to provide access to wire management cavity. Actual Dimensions Depth (Thickness) 2" at top, 3 1/2" at base Width 24", 30", 36", 42" & 48" Height (Minimum) 62", 67" & 85" Wire Management 5" 58 January 1, 2013

22 A2 POWERED FABRIC HALF GLAZED PANEL HALF GLAZED FABRIC PANEL WITH CHOICE OF BRONZE OR CLEAR GLAZING * Product number. * Includes Electrical Harness. * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Panel Connectors (Pgs ) and Festoons (Pg. 34) separately. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Fabric yardage estimate is for directional application (min 66" width). * Fabric name and style number. * Special fabrics may affect yardage requirements. PANEL WITH BRONZE GLAZING DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 62 x 24 MEGBRPX.6224YY $1,481 $1,547 $1,604 $1,662 $1, x 30 MEGBRPX.6230YY $1,857 $1,923 $2,028 $2,134 $2, x 36 MEGBRPX.6236YY $1,920 $1,985 $2,091 $2,196 $2, x 42 MEGBRPX.6242YY $2,167 $2,232 $2,336 $2,442 $2, x 48 MEGBRPX.6248YY $2,216 $2,281 $2,386 $2,491 $2, x 24 MEGBRPX.6724YY $1,673 $1,739 $1,795 $1,853 $1, x 30 MEGBRPX.6730YY $1,901 $1,967 $2,076 $2,185 $2, x 36 MEGBRPX.6736YY $1,969 $2,035 $2,143 $2,252 $2, x 42 MEGBRPX.6742YY $2,210 $2,276 $2,384 $2,493 $2, x 48 MEGBRPX.6748YY $2,265 $2,330 $2,439 $2,548 $2, x 24 MEGBRPX.8524YY $1,865 $1,930 $1,998 $2,083 $2, x 30 MEGBRPX.8530YY $2,132 $2,197 $2,334 $2,471 $2, x 36 MEGBRPX.8536YY $2,220 $2,285 $2,423 $2,561 $2, x 42 MEGBRPX.8542YY $2,351 $2,416 $2,554 $2,704 $2, x 48 MEGBRPX.8548YY $2,549 $2,615 $2,752 $2,889 $3, PANEL WITH CLEAR GLAZING DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 62 x 24 MEGCLPX.6224YY $1,481 $1,547 $1,604 $1,662 $1, x 30 MEGCLPX.6230YY $1,857 $1,923 $2,028 $2,134 $2, x 36 MEGCLPX.6236YY $1,920 $1,985 $2,091 $2,196 $2, x 42 MEGCLPX.6242YY $2,167 $2,232 $2,336 $2,442 $2, x 48 MEGCLPX.6248YY $2,216 $2,281 $2,386 $2,491 $2, x 24 MEGCLPX.6724YY $1,673 $1,739 $1,795 $1,853 $1, x 30 MEGCLPX.6730YY $1,901 $1,967 $2,076 $2,185 $2, x 36 MEGCLPX.6736YY $1,969 $2,035 $2,143 $2,252 $2, x 42 MEGCLPX.6742YY $2,210 $2,276 $2,384 $2,493 $2, x 48 MEGCLPX.6748YY $2,265 $2,330 $2,439 $2,548 $2, x 24 MEGCLPX.8524YY $1,865 $1,930 $1,998 $1,107 $2, x 30 MEGCLPX.8530YY $2,132 $2,197 $2,334 $2,471 $2, x 36 MEGCLPX.8536YY $2,220 $2,285 $2,423 $2,561 $2, x 42 MEGCLPX.8542YY $2,351 $2,416 $2,554 $2,704 $2, x 48 MEGCLPX.8548YY $2,549 $2,615 $2,752 $2,889 $3, January 1, 2013

23 A2 NON-POWERED FABRIC STACKING GLAZED PANEL, SINGLE OPENING STACKING GLAZED FABRIC PANEL WITH CLEAR GLAZING 14" OPENING * Product number. * Stackon BU or MT only * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Finished End (Pg. 31) to finish exposed panel end. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Panel Connectors (Pgs ) separately. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Fabric yardage estimate is for directional application (min 66" width). * Insert Color to match panel frame. * Special fabrics may affect yardage requirements. * Fabric name and style number. PANEL WITH CLEAR GLAZING, BU STACK INSERT DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 53 x 24 HESSNCLx.5324yy $976 $1,011 $1,046 $1,082 $1, x 30 HESSNCLx.5330yy $1,046 $1,080 $1,144 $1,208 $1, x 36 HESSNCLx.5336yy $1,151 $1,184 $1,248 $1,313 $1, x 42 HESSNCLx.5342yy $1,249 $1,281 $1,345 $1,409 $1, x 48 HESSNCLx.5348yy $1,306 $1,337 $1,383 $1,467 $1, x 60 HESSNCLx.5360yy $1,399 $1,441 $1,498 $1,559 $1, x 24 HESSNCLx.6724yy $993 $1,049 $1,103 $1,135 $1, x 30 HESSNCLx.6730yy $1,084 $1,140 $1,246 $1,312 $1, x 36 HESSNCLx.6736yy $1,230 $1,282 $1,379 $1,454 $1, x 42 HESSNCLx.6742yy $1,333 $1,385 $1,490 $1,557 $1, x 48 HESSNCLx.6748yy $1,408 $1,459 $1,568 $1,631 $1, x 60 HESSNCLx.6760yy $1,517 $1,563 $1,625 $1,689 $1, x 24 HESSNCLx.8524yy $1,424 $1,461 $1,518 $1,575 $1, x 30 HESSNCLx.8530yy $1,518 $1,553 $1,657 $1,762 $1, x 36 HESSNCLx.8536yy $1,664 $1,694 $1,799 $1,903 $1, x 42 HESSNCLx.8542yy $1,771 $1,798 $1,904 $2,008 $2, x 48 HESSNCLx.8548yy $1,847 $1,871 $1,976 $2,082 $2, January 1, 2013

24 A2 NON-POWERED FABRIC STACKING GLAZED PANEL, DOUBLE OPENING STACKING GLAZED FABRIC PANEL WITH CLEAR GLAZING 2 14" OPENINGS * Product number. * Stackon BU or MT only * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Order Finished End (Pg. 30) to finish exposed panel end. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Panel Connectors (Pgs ) separately. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Fabric yardage estimate is for directional application (min 66" width). * Insert Color to match panel frame. * Special fabrics may affect yardage requirements. * Fabric name and style number. PANEL WITH CLEAR GLAZING, BU STACK INSERT DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 67 x 24 HEDSNCLx.6724yy $1,253 $1,288 $1,324 $1,360 $1, x 30 HEDSNCLx.6730yy $1,313 $1,347 $1,411 $1,475 $1, x 36 HEDSNCLx.6736yy $1,391 $1,424 $1,488 $1,553 $1, x 42 HEDSNCLx.6742yy $1,441 $1,473 $1,537 $1,601 $1, x 48 HEDSNCLx.6748yy $1,483 $1,514 $1,579 $1,643 $1, x 60 HEDSNCLx.6760yy $1,555 $1,618 $1,682 $1,749 $1, January 1, 2013

25 A2 POWERED FABRIC STACKING GLAZED PANEL, SINGLE OPENING STACKING GLAZED FABRIC PANEL WITH CLEAR GLAZING 14" OPENING * Product number. * Stackon BU or MT only * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Includes Electrical Harness. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Finished End (Pg. 31) to finish exposed panel end. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Order Panel Connectors (Pgs ) and Festoons (Pg. 34) separately. * Insert Color to match panel frame. * Fabric yardage estimate is for directional application (min 66" width). * Fabric name and style number. * Special fabrics may affect yardage requirements. PANEL WITH CLEAR GLAZING, BU STACK INSERT DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 53 x 24 HESSPCLx.5324yy $1,156 $1,174 $1,209 $1,246 $1, x 30 HESSPCLx.5330yy $1,227 $1,243 $1,308 $1,372 $1, x 36 HESSPCLx.5336yy $1,332 $1,346 $1,410 $1,474 $1, x 42 HESSPCLx.5342yy $1,431 $1,443 $1,508 $1,572 $1, x 48 HESSPCLx.5348yy $1,491 $1,502 $1,566 $1,631 $1, x 60 HESSPCLx.5360yy $1,608 $1,616 $1,723 $1,792 $1, x 24 HESSPCLx.6724yy $1,195 $1,211 $1,255 $1,298 $1, x 30 HESSPCLx.6730yy $1,266 $1,302 $1,388 $1,474 $1, x 36 HESSPCLx.6736yy $1,403 $1,435 $1,520 $1,605 $1, x 42 HESSPCLx.6742yy $1,519 $1,549 $1,634 $1,721 $1, x 48 HESSPCLx.6748yy $1,595 $1,622 $1,708 $1,793 $1, x 60 HESSPCLx.6760yy $1,727 $1,778 $1,850 $1,923 $2, x 24 HESSPCLx.8524yy $1,581 $1,624 $1,650 $1,717 $1, x 30 HESSPCLx.8530yy $1,785 $1,818 $1,932 $2,027 $2, x 36 HESSPCLx.8536yy $1,899 $1,950 $2,063 $2,160 $2, x 42 HESSPCLx.8542yy $1,986 $2,035 $2,149 $2,244 $2, x 48 HESSPCLx.8548yy $2,015 $2,065 $2,178 $2,274 $2, January 1, 2013

26 A2 POWERED FABRIC STACKING GLAZED PANEL, DOUBLE OPENING STACKING GLAZED FABRIC PANEL WITH CLEAR GLAZING 2 14" OPENINGS * Product number. * Stackon BU or MT only * Wire Management color X (B=BU, M=MT, D=DT add +$25 per panel) * Includes Electrical Harness. * Wire Management Option, Raceway with Power Openings and 2 outlets per Add +$50 per panel -J * Order Finished End (Pg. 31) to finish exposed panel end. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Order Panel Connectors (Pgs ) and Festoons (Pg. 34) separately. * Insert Color to match panel frame. * Fabric yardage estimate is for directional application (min 66" width). * Fabric name and style number. * Special fabrics may affect yardage requirements. PANEL WITH CLEAR GLAZING, BU STACK INSERT DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ'D 67 x 24 HEDSPCLx.6724yy $1,468 $1,484 $1,527 $1,570 $1, x 30 HEDSPCLx.6730yy $1,527 $1,564 $1,649 $1,736 $1, x 36 HEDSPCLx.6736yy $1,637 $1,669 $1,755 $1,840 $1, x 42 HEDSPCLx.6742yy $1,706 $1,736 $1,821 $1,907 $1, x 48 HEDSPCLx.6748yy $1,765 $1,793 $1,879 $1,964 $2, x 60 HEDSPCLx.6760yy $1,824 $1,896 $1,972 $2,051 $2, January 1, 2013

27 A2 DOOR PANEL * Product number. * Includes laminated door, bronze or clear glazed side panel, painted * Door color YY (BU, DT, HT, HF, LG, LT, MT) steel frame, and locking door knob with hardware. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Shipped assembled. * Bronze or clear glazing. * Lock set must be field installed. ITEM ITEM HEIGHT WIDTH LIST WEIGHT DESCRIPTION NUMBER PRICE LEFT-HAND DOOR HMDPEL.8548YY 85" 48" $3, RIGHT-HAND DOOR HMDPER.8548YY 85" 48" $3, " 12" 85" 36" Left Hand Swing Right Hand Swing 64 January 1, 2013

28 A2 PANEL CONNECTORS * Product number. * Connectors include Wire Management Trim. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Wire Management color X (B=BU, D=DT (Add $15 list per connector), M=MT) TWO WAY 90 CONNECTOR CONNECTS TWO PANELS AT 90 DEGREES. DIMENSIONS ITEM LIST WEIGHT HEIGHT NUMBER PRICE 39" HME2CX.39YY $ " HME2CX.47YY $ " HME2CX.53YY $ " HME2CX.62YY $ " HME2CX.67YY $ " HME2CX.85YY $ THREE WAY CONNECTOR CONNECTS THREE PANELS AT A T. DIMENSION: ITEM WEIGHT HEIGHT NUMBER 39" HME3CX.39YY $ " HME3CX.47YY $ " HME3CX.53YY $ " HME3CX.62YY $ " HME3CX.67YY $ " HME3CX.85YY $ FOUR WAY CONNECTOR CONNECTS FOUR PANELS AT AN INTERSECTION. DIMENSION: ITEM WEIGHT HEIGHT NUMBER 39" HME4C.39YY $ " HME4C.47YY $ " HME4C.53YY $ " HME4C.62YY $ " HME4C.67YY $ " HME4C.85YY $ PANEL CONNECTOR ROD - DT ONLY CONNECTS TWO PANELS IN A STRAIGHT LINE. DIMENSION: ITEM WEIGHT HEIGHT NUMBER 39" HMPC.39 $ " HMPC.47 $ " HMPC.53 $ " HMPC.62B $ " HMPC.67 $ " HMPC.85 $ January 1, 2013

29 A2 PANEL CONNECTORS * Product number. * Trim color YY (BU, DT, HT, HF, LG, LT, MT) * Wire Management color X (B=BU, D=DT (Add $15 list per connector), M=MT) T-CONNECTOR (WALL START) CONNECTS PANEL TO AN EXISTING STRUCTURAL WALL TO BEGIN A PANEL RUN, INCLUDES ONE (1) CONNECTOR ROD (SEE ABOVE) ORDER WALL FASTENERS (see below) SEPARATELY. DIMENSION: ITEM LIST WEIGHT HEIGHT NUMBER PRICE 39" HMTC.39YY $ " HMTC.47YY $ " HMTC.53YY $ " HMTC.62YY $ " HMTC.67YY $ " HMTC.85YY $107 9 ANCHOR KIT (4) HMWF.4 $17 2 FINISHED END FINISHES EXPOSED PANEL END. WIRE MANAGEMENT TRIM INCLUDED. DIMENSION: ITEM WEIGHT HEIGHT NUMBER 39" HMEECX.39YY $ " HMEECX.47YY $ " HMEECX.53YY $ " HMEECX.62YY $ " HMEECX.67YY $ " HMEECX.85YY $72 5 TWO WAY 180 DEGREE CONNECTOR CONNECTS PANELS OF EQUAL OR UNEQUAL HEIGHTS FOR DIMENSIONAL GAIN. USE ONLY IN SPECIAL CONDITIONS DIMENSION: ITEM LIST WEIGHT HEIGHT NUMBER PRICE 39" HME180CX.39YY $ " HME180CX.47YY $ " HME180CX.53YY $ " HME180CX.62YY $ " HME180CX.67YY $ " HME180CX.85YY $ January 1, 2013

30 A2 PANEL COMPONENTS * Product number. WALL HANGER STRIP HIGH QUALITY BRUSHED ALUMINUM EXTRUSION WITH HEAVY DUTY 16 GAUGE STEEL SLOTTED INSERT IS USED TO HANG COMPONENTS OR WORK SURFACES DIRECTLY FROM A WALL. ORDER WALL FASTENERS (SEE BELOW) SEPARATELY. NATURAL ALUMINUM COLOR ONLY PRICING IS PER STRIP, PICTURE SHOWS APPLICATION ONLY. ITEM DESCRIPTION 60" WALL HANGER STRIP 72" WALL HANGER STRIP 84" WALL HANGER STRIP ITEM LIST WEIGHT NUMBER PRICE HMWHS.60 $95 Each Strip 3 HMWHS.72 $101 Each Strip 4 HMWHS.84 $112 Each Strip 4 WALL FASTENERS USE TO FASTEN A T-CONNECTOR OR WALL HANGER STRIP TO AN EXISTING WALL. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE 3/16 TOGGLE BOLT ANCHOR HMWF.1 $3 1 3/16 x 3 FLAT HEAD TOGGLE BOLT HMWF.2 $1 1 ANCHOR KIT (12) HMWF.3 $51 12 VARIABLE HEIGHT FILLER STRIP - RIGID FINISHES EXPOSED END OF CONNECTOR OR PANEL WHEN JOINING PANELS OF DIFFERENT HEIGHTS. CUT TO LENGTH AS REQUIRED. * Trim color YY (BU, DT, HT, LG, LT, MT), Color is for Filler Strip only. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE VARIABLE HEIGHT PKG - 42" LENGTH HMVHYY $ January 1, 2013

31 A2 ENERGY COMPONENTS Notes: For Powered Wire Management Covers * Product number. * Includes (2) Covers. * Product color - YY (BU, DT (Add $15 list each), MT) * Order Electrical Harness, Festoons, and Outlet Covers separately (See Below). CONVERSION FROM NONPOWERED TO POWERED WIRE MANAGEMENT REPLACES NON-POWERED COVERS ALLOWING CONVERSION TO POWERED CAPABILITIES. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE 24" POWERED COVERS HMEPWM.24YY $ " POWERED COVERS HMEPWM.30YY $ " POWERED COVERS HMEPWM.36YY $ " POWERED COVERS HMEPWM.42YY $ " POWERED COVERS HMEPWM.48YY $ " POWERED COVERS HMEPWM.60YY $ OUTLET COVER HMEOC.YY $8 1 * Product number. 8 WIRE 4 CIRCUIT ELECTRICAL HARNESS USE WITH POWERED WIRE MANAGEMENT TO DISTRIBUTE 4 OPEN 20 AMP CIRCUITS. UP TO FOUR RECEPTACLES CAN BE PLACED ON EACH PANEL. ORDER FESTOON CABLES SEPARATELY. (SEE BELOW) ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE 24" HM8WP.24 $ " HM8WP.30 $ " HM8WP.36 $ " HM8WP.42 $ " HM8WP.48 $ " HM8WP.60 $277 5 FESTOONS CONNECTS POWER BETWEEN PANELS ONLY, OR BETWEEN PANELS CONNECTED BY A 2-WAY, 3-WAY, 4-WAY, OR SPACER POST. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE 11" PANEL TO PANEL HM8.PTP $ " PANEL THRU POST HM8.PTC $ January 1, 2013

32 A2 ENERGY COMPONENTS * Product number. * Receptacle color YY (BK) PASS THRU JUMPERS USE THIS FLEXIBLE CONDUIT CABLE TO PASS POWER THROUGH A NONPOWERED PANEL TO CONNECT WITH ANOTHER ELECTRICAL HARNESS. PANEL ITEM LIST WEIGHT WIDTH NUMBER PRICE 12" HM8PJ.12 $ " HM8PJ.18 $ " HM8PJ.24 $ " HM8PJ.30 $ " HM8PJ.36 $ " HM8PJ.42 $ " HM8PJ.48 $ " HM8PJ.60 $ " HM8PJ.72 $ " HM8PJ.84 $ " HM8PJ.96 $ " HM8PJ.108 $ " HM8PJ.132 $ POWER ENTRY CONNECTS A BUILDING'S ELECTRICAL SUPPLY FROM THE CEILING, WALL, OR FLOOR TO THE BASE OF A PANEL. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE 72" POWER FEED-RIGHT HM8PFR.72 $ " POWER FEED-LEFT HM8PFL.72 $ " CEILING INFEED HM8CF.144 $191 5 NY Base in Feed HM8.NYPF30 $1, Designed for 30" Panel Entry cable not included (supplied by local electrician) 8 WIRE, 4 CIRCUIT ELECTRICAL RECEPTACLES PLUGS INTO THE ELECTRICAL HARNESS. SELECT CIRCUITS 1, 2, 3, DC. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE CIRCUIT 1 HM8C1.BU $33 1 CIRCUIT 2 HM8C2.BU $33 1 CIRCUIT 3 HM8C3.BU $33 1 DEDICATED CIRCUIT (orange delta) HM8DC.BU $ January 1, 2013

33 A2 ENERGY COMPONENTS * Product number. * Product color - "YY" ((BU, MT. LG) BASIC POWER POLES HOLLOW, 2" x 2" RIGID 11 FOOT PVC EXTRUSION USED TO CONCEAL CEILING POWER INFEED, OR COMMUNICATION AND DATA DISTRIBUTION CABLES. HARDWARE INCLUDED TO MOUNT POLE TO END OF PANEL RUN. ORDER BY SIZE OF CONNECTING PANEL. DOES NOT HAVE SEPARATION OF DATA & POWER ORDER CEILING POWER INFEED (Pg. 31) SEPARATELY. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE POWER POLE ONLY HMPP.YY $ POWER POLE with hardware HM8PP.39YY $ POWER POLE with hardware HM8PP.47YY $ POWER POLE with hardware HM8PP.53YY $ POWER POLE with hardware HM8PP.62YY $ POWER POLE with hardware HM8PP.67YY $ POWER POLE with hardware HM8PP.85YY $ LARGE POWER POLES HOLLOW, 3" x 4" RIGID 12 FOOT PVC EXTRUSION USED TO CONCEAL CEILING POWER INFEED, OR COMMUNICATION AND DATA DISTRIBUTION CABLES. INCLUDES BASE TRIM AND CEILING BEZEL. DOES NOT INCLUDE PANEL CONNECTING HARDWARE. DOES NOT HAVE SEPARATION OF DATA & POWER. FIELD ADAPT FOR INSTALLATION, SCREW TO CONNECTOR, INSTALLER MUST PROVIDE MOUNTING SCREW AND DRILL BIT. ORDER CEILING POWER INFEED (Pg. 31) SEPARATELY. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE POWER POLE Black Umber HMLPP.BU $ POWER POLE Medium Tone HMLPP.MT $ POWER POLE with hardware HMLPP.39yy $ POWER POLE with hardware HMLPP.47yy $ POWER POLE with hardware HMLPP.53yy $ POWER POLE with hardware HMLPP.62yy $ POWER POLE with hardware HMLPP.67yy $ POWER POLE with hardware HMLPP.85yy $ NOTE: This product is available in BU and MT Only 70 January 1, 2013

34 A2 WORK SURFACE TOPS ONLY * Product number. * Tops only, with 3 mm vinyl edge. xxphusion tops are similar in appearance with xxphusion wrap on edges * Edge finishes (BU, DT, HT, LG, LT, MT) * Order Supports and mounting hardware (Pg.40) separately. * Laminate finishes (Pg. 7) * Special laminate colors available upon request. RECTANGULAR WORK SURFACE TOPS STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT L x DEPTH NUMBER PRICE PRICE PRICE 24 x 24 EWS.2424 $245 $270 $ x 24 EWS.3024 $308 $339 $ x 24 EWS.3624 $319 $351 $ x 24 EWS.4224 $389 $427 $ x 24 EWS.4824 $416 $458 $ x 24 EWS.5424 $485 $533 $ x 24 EWS.6024 $528 $581 $ x 24 EWS.6624 $562 $619 $ x 24 EWS.7224 $603 $663 $ x 24 EWS.7824 $725 $797 $ x 24 EWS.8424 $735 $809 $ x 24 EWS.9024 $838 $922 $ x 24 EWS.9624 $849 $933 $ x 30 EWS.2430 $320 $352 $ x 30 EWS.3030 $364 $400 $ x 30 EWS.3630 $422 $464 $ x 30 EWS.4230 $464 $511 $ x 30 EWS.4830 $477 $525 $ x 30 EWS.5430 $537 $590 $ x 30 EWS.6030 $592 $652 $ x 30 EWS.6630 $653 $718 $ x 30 EWS.7230 $718 $790 $ x 30 EWS.7830 $786 $865 $ x 30 EWS.8430 $796 $876 $ x 30 EWS.9030 $906 $997 $ x 30 EWS.9630 $917 $1,009 $ CORNER WORK SURFACE TOPS USE FOR 90 DEGREE CORNERS. GRAIN DIRECTION 45 DEGREE, EXCEPT ON xxphusion TOPS THEY ARE 90 DEGREE STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE 36 x 24 ECWS.3624 $577 $635 $ x 24 ECWS.4224 $653 $718 $ x x 24 ECWS.4824 $693 $762 $ x x x 30 ECWS.3630 $582 $640 $ x 30 ECWS.4230 $668 $735 $ x x 30 ECWS.4830 $715 $787 $ x x 30 CORNER WORK SURFACE TOPS INSIDE CURVE USE FOR 90 DEGREE CORNERS. GRAIN DIRECTION 90 DEGREE STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE 36 x 24 ECCWS.3624 $566 $622 $ x 24 ECCWS.4224 $639 $703 $ x 24 ECCWS.4824 $682 $750 $ x 30 ECCWS.3630 $571 $629 $ x 30 ECCWS.4230 $651 $716 $ x 30 ECCWS.4830 $699 $770 $ January 1, 2013

35 A2 WORK SURFACE TOPS ONLY * Product number. * Tops only, with 3 mm vinyl edge. xxphusion tops are similar in appearance with xxphusion wrap on edges * Edge finishes (BU, DT, HT, LG, LT, MT) * Order Supports and mounting hardware (Pg. 40) separately. * Laminate finishes (Pg. 7) * Special laminate colors available upon request. PENINSULA WORK SURFACE TOPS STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE 30 x 48 EP.3048 $537 $590 $ x 54 EP.3054 $575 $633 $ x 60 EP.3060 $638 $702 $ x 66 EP.3066 $732 $806 $ x 72 EP.3072 $767 $844 $ x 48 EP.3648 $614 $676 $ x 60 EP.3660 $767 $844 $ x 66 EP.3666 $839 $923 $ x 72 EP.3672 $920 $1,012 $ COUNTER CAP TOPS USE ON PANEL CAPS AS TRANSACTION COUNTER FOR SECRETARIAL AND RECEPTION WORKSTATIONS. NOTE: ORDER SURFACE WIDTH TO MATCH WIDTH OF PANEL OR PANELS. STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W X DEPTH NUMBER PRICE PRICE PRICE 24 x 14 ECC.2414 $167 $184 $ x 14 ECC.3014 $205 $225 $ x 14 ECC.3614 $243 $268 $ x 14 ECC.4214 $282 $310 $ x 14 ECC.4814 $307 $338 $ x 14 ECC.5414 $338 $373 $ x 14 ECC.6014 $371 $409 $ x 14 ECC.6614 $393 $432 $ x 14 ECC.7214 $424 $466 $ x 24 x 14 ERACC.2424 $362 $398 $ x 30 x 14 ERACC.3030 $492 $541 $ x 36 x 14 ERACC.3636 $635 $699 $ x 42 x 14 ERACC.4242 $839 $923 $ x 48 x 14 ERACC.4848 $930 $1,023 $ HALF ROUND WORKSURFACE TOP WORKSURFACE IS DESIGNED TO PROVIDE A COMMON WORK AREA FOR ADJACENT WORKERS BY BRIDGING TWO WORK SURFACES AT THE END OF A PANEL RUN. NOTE: CUTOUT IS TRIMMED IN BLACK ONLY. STD LAMINATE PREMIUM LAM xxphusion DIAMETER ITEM LIST LIST LIST WEIGHT NUMBER PRICE PRICE PRICE 50" X 24"D ED.5024 $704 $775 $ QUARTER ROUND WORKSURFACE TOP WORKSURFACE IS DESIGNED TO PROVIDE A COMMON WORK AREA FOR ADJACENT WORKERS BY BRIDGING TWO WORK SURFACES AT THE CORNER OF A PANEL RUN. STD LAMINATE PREMIUM LAM xxphusion DIAMETER ITEM LIST LIST LIST WEIGHT NUMBER PRICE PRICE PRICE 24 x 24 EWSQ.24 $717 $789 $ x 30 EWSQ.30 $771 $847 $ January 1, 2013

36 A2 WORK SURFACE SUPPORTS * Product number. * Counter Cap Supports and Corner Work Surface Brackets * Product color - "YY" (BU, DT, HT, LG, LT, MT) come in Black only. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE SUPPORT ARM - SHARED 24"D WSA.24SYY $70 5 SUPPORT ARM - PAIR 24"D WSA.24YY $70 6 SUPPORT ARM - SHARED 30"D WSA.30SYY $102 5 SUPPORT ARM - PAIR 30"D WSA.30YY $102 8 CORNER W. S. BRACKET - PAIR WSCB.01BK $22 1 COUNTER CAP SUPPORT - PAIR CCS.01BK $52 1 (Available Black Only, 2 pair required per counter cap) COUNTER CAP SUPPORT OEM STYLE, note these require a rod, end cap or connector to install CENTER STYLE For Rod HMCCCT $77 3 END STYLE for End Cap HMCCEND $77 3 MID END STYLE for Connector HMCCMID $77 3 ADJUSTABLE PENINSULA LEG 4" PLA.YY $ DOUBLE PENINSULA LEG PLD.YY $ SINGLE SUPPORT LEG 2" HMALG.YY $ C SUPPORT LEG PLC.YY $ FLAT PLATE FP.25BK $ January 1, 2013

37 A2 WORK SURFACE SUPPORTS WORK SURFACE SUPPORT PANEL END PANEL END HAS LAMINATE SURFACE AND ATTACHES TO BOTH A PANEL AND WORK SURFACE AT THE END OF A PANEL RUN TO PROVIDE SUPPORT AND ELIMINATE THE NEED FOR A RETURN PANEL AND CONNECTOR. * Product number. * Support Panel is non-handed. Boring is not included, installer must tap and bore part in field for application. * Support Panel depth to match work surface depth. * Includes attachment hardware (2 90 degree angle brackets, rear panel bracket and screws) and 2" adjustable glides. * Laminate finishes (Pg. 7) * Height is 28". STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT DEPTH NUMBER PRICE PRICE PRICE 18" HMEWSSP.18 $370 $408 $ " HMEWSSP.24 $381 $419 $ " HMEWSSP.30 $496 $546 $ " HMEWSSP.36 $571 $629 $ WORK SURFACE SUPPORT SUPPORT END HAS LAMINATE SURFACE AND ATTACHES TO MODESTY PANEL AND WORK SURFACE. TO CREATE A FREESTANDING OR CANTELIEVER APPLICATION. * Product number. * Support Panel is non-handed. Boring is not included, installer must tap and bore part in field for application. * Support Panel finished on top and both sides * Includes attachment hardware for modesty panel (4 90 degree angle brackets and screws) and 2" adjustable glides. * Laminate finishes (Pg. 7) * Height is 28". STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT DEPTH NUMBER PRICE PRICE PRICE 18" HMEWSEP.18 $370 $408 $ " HMEWSEP.24 $381 $419 $ " HMEWSEP.30 $496 $546 $ " HMEWSEP.36 $571 $629 $ January 1, 2013

38 A2 MODESTY PANELS MODESTY PANELS STEEL MODESTY PANEL FOR USE IN APPLICATIONS SIMILAR TO WHAT IS SHOWN. Applicatiion: End Support Panel to Pedestal 48" Length Top 54" Length Top 60" Length Top 66" Length Top 72" Length Top Use HMEMP YY Use HMEMP YY Use HMEMP YY Use HMEMP YY Use HMEMP YY Applicatiion: Pedestal to Pedestal 60" Length Top 66" Length Top 72" Length Top Use HMEMP YY Use HMEMP YY Use HMEMP YY Applicatiion: Peninsula Leg to Pedestal 60" Length Top Use HMEMP YY 66" Length Top Use HMEMP YY 72" Length Top Use HMEMP YY Applicatiion: Peninsula Leg to Support Panel 60" Length Top Use HMEMP YY 66" Length Top Use HMEMP YY 72" Length Top Use HMEMP YY Applicatiion: Peninsula Leg to Panel 60" Length Top 66" Length Top 72" Length Top Use HMEMP YY Use HMEMP YY Use HMEMP YY Applicatiion:Pedestal to Panel 60" Length Top 66" Length Top 72" Length Top Use HMEMP YY Use HMEMP YY Use HMEMP YY * Product number. * Modesty Panel includes mounting screws (12 each), pedestals, * Product color - "YY" (BU, DT, HT, LG, LT, MT) must be field bored for application. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE 29.25" Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ " Modesty Panel 22" High HMEMP YY $ January 1, 2013

39 A2 WORK SURFACES WITH SUPPORT HARDWARE * Product number. * Includes: * Edge finishes (BU, DT, HT, LG, LT, MT), xxphusion edges are wrap with laminate * 1 pair support arms up to 48"w, 1.5 pair support arms 54" and wider. * Laminate finishes (Pg. 7) * Corner worksurfaces also include rear corner bracket * Special laminate colors available upon request. * Corner worksurfaces also include black grommet * Support Arm finishes (BU, DT, HT, LG, LT, MT) RECTANGULAR WORK SURFACES CAN BE SUPPORTED BY PANELS OR WALL HANGER STRIPS. STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT L x Depth NUMBER PRICE PRICE PRICE 24 x 24 HMEWS.2424 $299 $329 $ x 24 HMEWS.3024 $369 $406 $ x 24 HMEWS.3624 $374 $411 $ x 24 HMEWS.4224 $448 $493 $ x 24 HMEWS.4824 $464 $511 $ x 24 HMEWS.5424 $558 $614 $ x 24 HMEWS.6024 $591 $650 $ x 24 HMEWS.6624 $630 $693 $ x 24 HMEWS.7224 $649 $714 $ x 24 HMEWS.7824 $798 $878 $ x 24 HMEWS.8424 $809 $890 $ x 24 HMEWS.9024 $912 $1,003 $ x 24 HMEWS.9624 $931 $1,024 $ x 30 HMEWS.2430 $397 $437 $ x 30 HMEWS.3030 $441 $485 $ x 30 HMEWS.3630 $497 $548 $ x 30 HMEWS.4230 $541 $596 $ x 30 HMEWS.4830 $554 $609 $ x 30 HMEWS.5430 $652 $717 $ x 30 HMEWS.6030 $708 $778 $ x 30 HMEWS.6630 $768 $845 $ x 30 HMEWS.7230 $834 $917 $ x 30 HMEWS.7830 $902 $993 $ x 30 HMEWS.8430 $913 $1,004 $ x 30 HMEWS.9030 $1,023 $1,125 $1, x 30 HMEWS.9630 $1,033 $1,137 $1, CORNER WORKSURFACE USE FOR 90 DEGREE CORNERS. CORNER BRACKETS INCLUDED. GRAIN DIRECTION 45 DEGREE EXCEPT ON xxphusion TOPS THEY ARE 90 DEGREE STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE 36 x 24 HMECWS.3624 $643 $707 $ x 24 HMECWS.4224 $719 $791 $ x x 24 HMECWS.4824 $738 $811 $ x x x 30 HMECWS.3630 $676 $743 $ x 30 HMECWS.4230 $762 $838 $ x x 30 HMECWS.4830 $809 $890 $ x x 30 CORNER WORKSURFACE, INSIDE CURVE USE FOR 90 DEGREE CORNERS. CORNER BRACKETS INCLUDED. GRAIN DIRECTION 90 DEGREE STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE 36 x 24 HMECCWS.3624 $632 $707 $ x 24 HMECCWS.4224 $704 $791 $ x 24 HMECCWS.4824 $720 $835 $ x 30 HMECCWS.3630 $656 $722 $ x 30 HMECCWS.4230 $736 $810 $ x 30 HMECCWS.4830 $779 $857 $ January 1, 2013

40 A2 WORK SURFACES WITH SUPPORT HARDWARE * Product number. * Includes: * Edge finishes (BU, DT, HT, LG, LT, MT), xxphusion edges are wrap with laminate * 1 pair support arms up to 48"w, 1.5 pair support arms 54" and wider. * Laminate finishes (Pg. 7) * Corner worksurfaces also include rear corner bracket * Special laminate colors available upon request. * Corner worksurfaces also include black grommet * Support Arm finishes (BU, DT, HT, LG, LT, MT) EXTENDED CORNER WORKSURFACE USE FOR 90 DEGREE CORNERS. CORNER BRACKETS INCLUDED. GRAIN DIRECTION 90 DEGREE PARALELL TO LONGEST EDGE STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE Right Hand Extension 24Dx36Wx48W HMECWS $941 $1,035 $ Dx36Wx60W HMECWS $950 $1,045 $ Dx36Wx66W HMECWS $1,012 $1,113 $1, Dx36Wx72W HMECWS $1,016 $1,118 $1, Dx42Wx48W HMECWS $1,018 $1,120 $1, Dx42Wx60W HMECWS $1,023 $1,125 $1, Dx42Wx66W HMECWS $1,025 $1,127 $1, Dx42Wx72W HMECWS $1,089 $1,198 $1, Dx48Wx60W HMECWS $1,036 $1,140 $1, Dx48Wx66W HMECWS $1,041 $1,145 $1, Dx48Wx72W HMECWS $1,089 $1,198 $1, Dx42Wx60W HMECWS $1,159 $1,275 $1, Dx42Wx66W HMECWS $1,163 $1,280 $1, Dx42Wx72W HMECWS $1,203 $1,324 $1, Dx48Wx60W HMECWS $1,206 $1,327 $1, Dx48Wx66W HMECWS $1,211 $1,333 $1, Dx48Wx72W HMECWS $1,217 $1,338 $1, Left Hand Extension 24Dx48Wx36W HMECWS $941 $1,035 $ Dx60Wx36W HMECWS $950 $1,045 $ Dx66Wx36W HMECWS $1,012 $1,113 $1, Dx72Wx36W HMECWS $1,016 $1,118 $1, Dx48Wx42W HMECWS $1,018 $1,120 $1, Dx60Wx42W HMECWS $1,023 $1,125 $1, Dx66Wx42W HMECWS $1,025 $1,127 $1, Dx72Wx42W HMECWS $1,089 $1,198 $1, Dx60Wx48W HMECWS $1,036 $1,140 $1, Dx66Wx48W HMECWS $1,041 $1,145 $1, Dx72Wx48W HMECWS $1,089 $1,198 $1, Dx60Wx42W HMECWS $1,159 $1,275 $1, Dx66Wx42W HMECWS $1,163 $1,280 $1, Dx72Wx42W HMECWS $1,203 $1,324 $1, Dx60Wx48W HMECWS $1,206 $1,327 $1, Dx66Wx48W HMECWS $1,211 $1,333 $1, Dx72Wx48W HMECWS $1,217 $1,338 $1, January 1, 2013

41 A2 WORK SURFACES WITH SUPPORT HARDWARE * Product number. * Includes: * Edge finishes (BU, DT, HT, LG, LT, MT), xxphusion edges are wrap with laminate * 1 pair support arms up to 48"w, 1.5 pair support arms 54" and wider. * Laminate finishes (Pg. 7) * Corner worksurfaces also include rear corner bracket * Special laminate colors available upon request. * Corner worksurfaces also include black grommet * Support Arm finishes (BU, DT, HT, LG, LT, MT) EXTENDED INSIDE CURVE CORNER WORKSURFACE USE FOR 90 DEGREE CORNERS. CORNER BRACKETS INCLUDED. GRAIN DIRECTION 90 DEGREE PARALELL TO LONGEST EDGE STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE Right Hand Extension 24Dx36Wx48W HMECCWS $941 $1,035 $ Dx36Wx60W HMECCWS $950 $1,045 $ Dx36Wx66W HMECCWS $1,012 $1,113 $1, Dx36Wx72W HMECCWS $1,016 $1,118 $1, Dx42Wx48W HMECCWS $1,018 $1,120 $1, Dx42Wx60W HMECCWS $1,023 $1,125 $1, Dx42Wx66W HMECCWS $1,025 $1,127 $1, Dx42Wx72W HMECCWS $1,089 $1,198 $1, Dx48Wx60W HMECCWS $1,036 $1,140 $1, Dx48Wx66W HMECCWS $1,041 $1,145 $1, Dx48Wx72W HMECCWS $1,089 $1,198 $1, Dx42Wx60W HMECCWS $1,159 $1,275 $1, Dx42Wx66W HMECCWS $1,163 $1,280 $1, Dx42Wx72W HMECCWS $1,203 $1,324 $1, Dx48Wx60W HMECCWS $1,206 $1,327 $1, Dx48Wx66W HMECCWS $1,211 $1,333 $1, Dx48Wx72W HMECCWS $1,217 $1,338 $1, Left Hand Extension 24Dx48Wx36W HMECCWS $941 $1,035 $ Dx60Wx36W HMECCWS $950 $1,045 $ Dx66Wx36W HMECCWS $1,012 $1,113 $1, Dx72Wx36W HMECCWS $1,016 $1,118 $1, Dx48Wx42W HMECCWS $1,018 $1,120 $1, Dx60Wx42W HMECCWS $1,023 $1,125 $1, Dx66Wx42W HMECCWS $1,025 $1,127 $1, Dx72Wx42W HMECCWS $1,089 $1,198 $1, Dx60Wx48W HMECCWS $1,036 $1,140 $1, Dx66Wx48W HMECCWS $1,041 $1,145 $1, Dx72Wx48W HMECCWS $1,089 $1,198 $1, Dx60Wx42W HMECCWS $1,159 $1,275 $1, Dx66Wx42W HMECCWS $1,163 $1,280 $1, Dx72Wx42W HMECCWS $1,203 $1,324 $1, Dx60Wx48W HMECCWS $1,206 $1,327 $1, Dx66Wx48W HMECCWS $1,211 $1,333 $1, Dx72Wx48W HMECCWS $1,217 $1,338 $1, January 1, 2013

42 A2 WORK SURFACES WITH SUPPORT HARDWARE * Product number. * Includes: * Edge finishes (BU, DT, HT, LG, LT, MT), xxphusion edges are wrap with laminate *Peninsula Top includes 1 pair support arms. * Laminate finishes (Pg. 7) * Peninsula Top includes 1 Single Column Peninsula Base 4" Diameter * Special laminate colors available upon request. * Counter Caps include standard universal mounting brackets. * Support Arm finishes (BU, DT, HT, LG, LT, MT) * Peninsula Leg finishes (BU, DT, HT, LG, LT, MT) PENINSULA WORK SURFACE CAN BE SUPPORTED BY PANELS OR WALL HANGER STRIPS. 4" ADJUSTABLE PENINSULA LEG INCLUDED. STD LAMINATE PREMIUM LAM xxphusion DIMENSION: ITEM LIST LIST LIST WEIGHT W x DEPTH NUMBER PRICE PRICE PRICE 24 x 48 HMEP.2448 $806 $887 $ x 60 HMEP.2460 $935 $1,029 $ x 48 HMEP.3048 $931 $1,024 $ x 54 HMEP.3054 $968 $1,065 $ x 60 HMEP.3060 $1,031 $1,135 $1, x 66 HMEP.3066 $1,041 $1,145 $1, x 72 HMEP.3072 $1,055 $1,160 $1, x 48 HMEP.3648 $930 $1,023 $ x 60 HMEP.3660 $1,053 $1,159 $1, x 66 HMEP.3666 $1,125 $1,237 $1, x 72 HMEP.3672 $1,225 $1,348 $1, COUNTER CAP USE ON PANEL CAPS AS TRANSACTION COUNTER FOR SECRETARIAL AND RECEPTION WORKSTATIONS. NOTE: ORDER SURFACE WIDTH TO MATCH WIDTH OF PANEL OR PANELS. DIMENSION: ITEM WEIGHT W X DEPTH NUMBER 24 x 14 HMECC.2414 $268 $295 $ x 14 HMECC.3014 $281 $308 $ x 14 HMECC.3614 $292 $321 $ x 14 HMECC.4214 $300 $330 $ x 14 HMECC.4814 $306 $337 $ x 14 HMECC.5414 $333 $366 $ x 14 HMECC.6014 $373 $410 $ x 14 HMECC.6614 $394 $433 $ x 14 HMECC.7214 $424 $466 $ x 14 HMECC.7814 $573 $631 $ x 14 HMECC.8414 $585 $644 $ x 14 HMECC.9014 $591 $650 $ x 14 HMECC.9614 $599 $659 $ x 24 x 14 HMERACC.2424 $463 $509 $ x 30 x 14 HMERACC.3030 $560 $617 $ x 36 x 14 HMERACC.3636 $741 $814 $ x 42 x 14 HMERACC.4242 $747 $822 $ x 48 x 14 HMERACC.4848 $759 $835 $ January 1, 2013

43 A2 WORK SURFACES & TABLES WITH SUPPORT HARDWARE * Product number. * Includes laminate top with vinyl t-edge. * Size of Table. * Cutout is trimmed in Black only. * Edge finishes (BU, DT, HT, LG, LT, MT), xxphusion edges are wrap with laminate * Height is 29" * Laminate finishes (Pg. 7) * Thickness is 1.25" * Special laminate colors available upon request. * Post & Leg finishes (BU, DT, HT, LG, LT, MT) HALF ROUND WORKSURFACE WITH SUPPORTS INCLUDES CHOICE OF SUPPORTING HARDWARE TO CREATE EITHER A STATIONARY SURFACE OR ISLAND. TWO HALF ROUND UNITS (HMEDB OR HMEDC) CAN BE JOINED TO CREATE A MEETING TABLE. ORDER FLAT PLATE (PG. 36) SEPARATELY. STD LAMINATE PREMIUM LAM xxphusion DIMENSION ITEM LIST LIST LIST WEIGHT L X W NUMBER PRICE PRICE PRICE 50" X 24" HMEDA.5024 $876 $964 $ Includes One Post Leg HMEDA " X 24" HMEDB.5024 $1,063 $1,170 $1, " X 24" HMEDC.5024 $1,505 $1,655 $1, ncludes Two Cone Legs with Glides HMEDB.5024 Includes Three Cone legs with Casters for mobile use HMEDC.5024 QUARTER ROUND WORKSURFACE WITH SUPPORTS INCLUDES SUPPORTING HARDWARE TO CONNECT TO WORKSURFACES AND PANELS ON EACH SIDE STD LAMINATE PREMIUM LAM xxphusion DIMENSION ITEM LIST LIST LIST WEIGHT L X W NUMBER PRICE PRICE PRICE 24 x 24 HMEWSQ.24yy $896 $985 $ x 30 HMEWSQ.30yy $937 $1,031 $ January 1, 2013

44 A2 TABLES * Product number. * Tables include laminate top with 3mm vinyl edge. * Size of Table. * Height is 29" * Edge finishes (BU, DT, HT, LG, LT, MT), xxphusion edges are wrap with laminate * Thickness is 1.25" * Laminate finishes (Pg. 7) * Includes 2" tubular base * Special laminate colors available upon request. * Round Table Base finishes (BU, DT, HT, LG, LT, MT) * Training Table Base finish is Black only. ROUND MEETING TABLES INCLUDES A 2" DIAMETER ROUND TUBE BASE. STD LAMINATE PREMIUM LAM xxphusion DIAMETER ITEM LIST LIST LIST WEIGHT NUMBER PRICE PRICE PRICE 30" HMERT.30 $745 $820 $ " HMERT.36 $827 $910 $ " HMERT.42 $931 $1,024 $ " HMERT.48 $1,034 $1,138 $1, TRAINING TABLES INCLUDES A MODESTY PANEL AND "C" LEGS WITH CABLE ACCESS PANELS. DIMENSION ITEM WEIGHT L X W NUMBER 24 x 36" HMETT.2436 $695 $764 $ x 42" HMETT.2442 $754 $829 $ x 48" HMETT.2448 $775 $853 $ x 54" HMETT.2454 $855 $940 $ x 60" HMETT.2460 $887 $976 $ x 66" HMETT.2466 $937 $1,031 $ x 72" HMETT.2472 $978 $1,076 $ x 36" HMETT.3036 $729 $802 $ x 42" HMETT.3042 $787 $866 $ x 48" HMETT.3048 $808 $889 $ x 54" HMETT.3054 $889 $978 $ x 60" HMETT.3060 $920 $1,012 $ x 66" HMETT.3066 $970 $1,067 $ x 72" HMETT.3072 $1,011 $1,112 $1, January 1, 2013

45 A2 OVERHEAD STORAGE * Product number. * Flipper Door is lockable. * Product color YY (BU, DT, HT, LG, LT, MT) * Locks can be keyed alike upon request. * Fabric style & color number. * Shipped partially assembled. * Shelf End color, if different from Shelf and top of Unit. * Fabric yardage estimate is for directional application (minimum 66 usable width). * Special fabrics may affect yardage requirements. FLIPPER DOOR UNIT, FABRIC INCLUDES SHELF, HIGH SHELF ENDS, AND FLIPPER DOOR COVERED IN FABRIC. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT W x D x H NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ D 24 x 12.5 x 15.5 HMEFDU.24YY $454 $462 $482 $501 $ x 12.5 x 15.5 HMEFDU.30YY $468 $472 $492 $510 $ x 12.5 x 15.5 HMEFDU.36YY $479 $488 $508 $526 $ x 12.5 x 15.5 HMEFDU.42YY $502 $507 $520 $538 $ x 12.5 x 15.5 HMEFDU.48YY $533 $539 $550 $568 $ x 12.5 x 15.5 HMEFDU.60YY $637 $644 $664 $682 $ FLIPPER DOOR, FABRIC ORDER HIGH SHELF (Pg. 50) TO FORM COMPLETE FLIPPER UNIT. DIMENSION: ITEM YDG WEIGHT W x D NUMBER REQ D 24 x 12.5 HMEFD.24YY $282 $287 $307 $326 $ x 12.5 HMEFD.30YY $286 $291 $312 $330 $ x 12.5 HMEFD.36YY $291 $299 $319 $337 $ x 12.5 HMEFD.42YY $296 $301 $321 $339 $ x 12.5 HMEFD.48YY $310 $320 $330 $350 $ x 12.5 HMEFD.60YY $401 $409 $429 $447 $ KEY ALIKE OPTION FOR PEDESTALS/FILES/CABINETS/FLIPPER DOORS. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE Key Alike HMKA $ January 1, 2013

46 A2 OVERHEAD STORAGE * Product number. * Includes Shelf and Shelf Ends. * Product color YY (BU, DT, HT, LG, LT, MT) * Shipped one per box. * Shelf End color, if different from Shelf. * Shipped unassembled. HIGH SHELF DIMENSION: ITEM LIST WEIGHT W x D x H NUMBER PRICE 24 x 12.5 x 15.5 HMEHS.24YY $ x 12.5 x 15.5 HMEHS.30YY $ x 12.5 x 15.5 HMEHS.36YY $ x 12.5 x 15.5 HMEHS.42YY $ x 12.5 x 15.5 HMEHS.48YY $ x 12.5 x 15.5 HMEHS.60YY $ LOW SHELF - 7 1/2 " HIGH DIMENSION: ITEM WEIGHT W x D x H NUMBER 24 x 12.5 x 7.5 HMELS.24YY $ x 12.5 x 7.5 HMELS.30YY $ x 12.5 x 7.5 HMELS.36YY $ x 12.5 x 7.5 HMELS.42YY $ x 12.5 x 7.5 HMELS.48YY $ x 12.5 x 7.5 HMELS.60YY $ January 1, 2013

47 MIRAGE METAL OVERHEAD STORAGE -STANDARD DEPTH * Product number. * Includes Shelf and Shelf Ends * Product color YY (BU, DT, HT, LG, LT, MT) * Shipped one per box. * Shelf End color, if different from Shelf. * Shipped unassembled. METAL FLIPPER DOOR UNIT WITH LOCK RECEEDING DOOR INCLUDES SHELF, HIGH SHELF ENDS, AND METAL FLIPPER DOOR. DOOR RECEEDS INTO THE CABINET * Product number. * Locks can be keyed alike upon request. * Product color YY (BU, DT, HT, LG, LT, MT) * Shipped one per box. * Ready to install. * Door receeds into the cabinet. DIMENSION: ITEM LIST WEIGHT W x D NUMBER PRICE 24 x 15 x 14.5 MFRFDU.24YY $ x 15 x 14.5 MFRFDU.30YY $ x 15 x 14.5 MFRFDU.36YY $ x 15 x 14.5 MFRFDU.42YY $ x 15 x 14.5 MFRFDU.48YY $ x 15 x 14.5 MFRFDU.60YY $1, METAL FLIPPER DOOR UNIT WITH LOCK OVERTOP DOOR INCLUDES SHELF, HIGH SHELF ENDS, AND METAL FLIPPER DOOR. DOOR OPENS OVER THE TOP OF THE CABINET * Product number. * Locks can be keyed alike upon request. * Product color YY (BU, DT, HT, LG, LT, MT) * Shipped one per box. * Ready to install. * Door opens over Flipper top. DIMENSION: ITEM WEIGHT W x D NUMBER 24 x 15 x 13.5 MFFDU.24YY $ x 15 x 13.5 MFFDU.30YY $ x 15 x 13.5 MFFDU.36YY $ x 15 x 13.5 MFFDU.42YY $ x 15 x 13.5 MFFDU.48YY $ x 15 x 13.5 MFFDU.60YY $ KEY ALIKE OPTION FOR PEDESTALS/FILES/CABINETS/FLIPPER DOORS. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE Key Alike HMKA $ January 1, 2013

48 A2 TACKBOARDS * Product number. * Fabric covered. * Fabric style and number. * Includes all hardware for mounting. * Fabric yardage estimate is for directional application (minimum 66 usable width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST GRADE 4 LIST REQ D 12 x 24 HMETB.1224 $160 $177 $191 $201 $ x 30 HMETB.1230 $172 $190 $203 $212 $ x 36 HMETB.1236 $180 $197 $210 $220 $ x 42 HMETB.1242 $188 $206 $219 $228 $ x 48 HMETB.1248 $190 $208 $221 $231 $ x 60 HMETB.1260 $200 $217 $231 $240 $ x 24 HMETB.1624 $163 $180 $194 $204 $ x 30 HMETB.1630 $174 $191 $204 $213 $ x 36 HMETB.1636 $185 $202 $215 $224 $ x 42 HMETB.1642 $192 $209 $222 $232 $ x 48 HMETB.1648 $197 $215 $228 $238 $ x 60 HMETB.1660 $205 $222 $235 $245 $ x 24 HMETB.2424 $247 $264 $276 $296 $ x 48 HMETB.2448 $310 $320 $336 $355 $ x 36 HMETB.3636 $364 $390 $433 $462 $ X 48 HMETB.4848 $468 $522 $541 $608 $ January 1, 2013

49 A1 FABRIC PANEL - NO RACEWAY Product Description Fabric covered hard surface panel. Includes (1) panel. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Panel face - Fabric covered hard surface. Width Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Actual Dimensions Depth (Thickness) 2" Width 12", 18", 24", 30", 36", 42", 48" & 60" Height (Minimum) 34", 42", 48", 57", 62" & 80" * Product number. * Order Finished End (Pg. 67) to finish exposed panel end. * Trim color YY (BU, DT, HT, LG, LT, MT) * Order Panel Connectors (Pgs ) * Fabric name and style number. * Fabric yardage estimate is for directional application (minmum 66" usable width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST REQ'D 34 x 12 H3412YY $288 $324 $363 $ x 18 H3418YY $303 $339 $378 $ x 24 H3424YY $308 $345 $383 $ x 30 H3430YY $345 $380 $448 $ x 36 H3436YY $378 $412 $480 $ x 42 H3442YY $409 $443 $511 $ x 48 H3448YY $443 $476 $544 $ x 60 H3460YY $554 $584 $652 $ January 1, 2013

50 A1 FABRIC PANEL - NO RACEWAY * Product number. * Order Finished End (Pg. 67) to finish exposed panel end. * Trim color YY (BU, DT, HT, LG, LT, MT) * Order Panel Connectors (Pgs ) * Fabric name and style number. * Fabric yardage estimate is for directional application (minmum 66" usable width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST REQ'D 42 x 12 H4212YY $287 $335 $377 $ x 18 H4218YY $303 $350 $392 $ x 24 H4224YY $308 $355 $397 $ x 30 H4230YY $353 $399 $480 $ x 36 H4236YY $401 $446 $527 $ x 42 H4242YY $448 $492 $562 $ x 48 H4248YY $500 $541 $622 $ x 60 H4260YY $623 $663 $744 $ x 12 H4812YY $297 $355 $401 $ x 18 H4818YY $313 $370 $416 $ x 24 H4824YY $319 $378 $424 $ x 30 H4830YY $373 $429 $521 $ x 36 H4836YY $424 $479 $571 $ x 42 H4842YY $478 $532 $623 $ x 48 H4848YY $532 $584 $676 $ x 60 H4860YY $663 $712 $804 $ x 12 H6212YY $319 $378 $439 $ x 18 H6218YY $383 $440 $501 $ x 24 H6224YY $392 $447 $508 $ x 30 H6230YY $448 $504 $616 $ x 36 H6236YY $504 $557 $669 $ x 42 H6242YY $556 $608 $720 $ x 48 H6248YY $613 $663 $775 $ x 60 H6260YY $765 $812 $924 $1, x 12 H8012YY $331 $429 $503 $ x 18 H8018YY $415 $511 $585 $ x 24 H8024YY $426 $522 $596 $ x 30 H8030YY $490 $584 $730 $ x 36 H8036YY $554 $647 $793 $ x 42 H8042YY $616 $707 $853 $1, x 48 H8048YY $679 $768 $915 $1, x 60 H8060YY $799 $886 $1,032 $1, January 1, 2013

51 A1 FABRIC ACOUSTICAL PANEL - NO RACEWAY Product Description Fabric covered sound-reducing panel. Includes (1) panel. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Panel face - Fabric covered sound-reducing surface. Width Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Actual Dimensions Depth (Thickness) 2" Open Market Only Not on GSA Schedule Width 12", 18", 24", 30", 36", 42", 48" & 60" Height (Minimum) 48", 57", 62" & 80" * Product number. * Order Finished End (Pg. 67) to finish exposed panel end. * Trim color YY (BU, DT, HT, LG, LT, MT) * Order Panel Connectors (Pgs ) * Fabric name and style number. * Fabric yardage estimate is for directional application (minmum 66" usable width). * Special fabrics may affect yardage requirements. 88 January 1, 2013

52 A1 FABRIC ACOUSTICAL PANEL - NO RACEWAY * Product number. * Order Finished End (Pg. 67) to finish exposed panel end. * Trim color YY (BU, DT, HT, LG, LT, MT) * Order Panel Connectors (Pgs ) * Fabric name and style number. * Fabric yardage estimate is for directional application (minmum 66" usable width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST REQ'D 48 x 12 HA.4812YY $417 $473 $518 $ x 18 HA.4818YY $481 $535 $581 $ x 24 HA.4824YY $490 $544 $590 $ x 30 HA.4830YY $526 $579 $670 $ x 36 HA.4836YY $574 $626 $717 $ x 42 HA.4842YY $620 $671 $762 $ x 48 HA.4848YY $666 $716 $807 $ x 60 HA.4860YY $814 $860 $951 $1, x 12 HA.6212YY $449 $503 $564 $ x 18 HA.6218YY $483 $537 $598 $ x 24 HA.6224YY $495 $548 $609 $ x 30 HA.6230YY $541 $593 $705 $ x 36 HA.6236YY $589 $640 $752 $ x 42 HA.6242YY $637 $687 $799 $ x 48 HA.6248YY $687 $736 $848 $ x 60 HA.6260YY $834 $880 $992 $1, Open Market Only Not on GSA Schedule 80 x 12 HA.8012YY $483 $578 $651 $ x 18 HA.8018YY $525 $618 $691 $ x 24 HA.8024YY $537 $630 $703 $ x 30 HA.8030YY $599 $690 $837 $ x 36 HA.8036YY $676 $766 $912 $1, x 42 HA.8042YY $730 $818 $965 $1, x 48 HA.8048YY $784 $871 $1,017 $1, x 60 HA.8060YY $900 $985 $1,131 $1, January 1, 2013

53 A1 FABRIC TACKABLE ACOUSTICAL PANEL - NO RACEWAY Product Description Fabric covered tackable sound-reducing panel. Includes (1) panel. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Panel face - Fabric covered tackable sound-reducing surface. Width Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Height Actual Dimensions Depth (Thickness) 2" Open Market Only Not on GSA Schedule Width 12", 18", 24", 30", 36", 42", 48" & 60" Height (Minimum) 48", 57", 62" & 80" * Product number. * Order Finished End (Pg. 67) to finish exposed panel end. * Trim color YY (BU, DT, HT, LG, LT, MT) * Order Panel Connectors (Pgs ) * Fabric name and style number. * Fabric yardage estimate is for directional application (minmum 66" usable width). * Special fabrics may affect yardage requirements. 90 January 1, 2013

54 A1 FABRIC TACKABLE ACOUSTICAL PANEL - NO RACEWAY * Product number. * Order Finished End (Pg. 67) to finish exposed panel end. * Trim color YY (BU, DT, HT, LG, LT, MT) * Order Panel Connectors (Pgs ) * Fabric name and style number. * Fabric yardage estimate is for directional application (minmum 66" usable width). * Special fabrics may affect yardage requirements. DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST REQ'D 48 x 12 HT4812YY $385 $416 $462 $ x 18 HT4818YY $400 $445 $491 $ x 24 HT4824YY $415 $476 $522 $ x 30 HT4830YY $451 $507 $598 $ x 36 HT4836YY $466 $537 $629 $ x 42 HT4842YY $481 $568 $659 $ x 48 HT4848YY $497 $597 $689 $ x 60 HT4860YY $531 $662 $753 $ x 12 HT6212YY $422 $451 $512 $ x 18 HT6218YY $440 $484 $545 $ x 24 HT6224YY $457 $517 $579 $ x 30 HT6230YY $476 $550 $662 $ x 36 HT6236YY $519 $584 $696 $ x 42 HT6242YY $540 $621 $733 $ x 48 HT6248YY $560 $654 $766 $ x 60 HT6260YY $601 $724 $836 $ Open Market Only Not on GSA Schedule 80 x 12 HT8012YY $490 $561 $635 $ x 18 HT8018YY $513 $582 $655 $ x 24 HT8024YY $537 $604 $677 $ x 30 HT8030YY $560 $742 $888 $1, x 36 HT8036YY $583 $763 $909 $1, x 42 HT8042YY $607 $784 $931 $1, x 48 HT8048YY $633 $808 $955 $1, x 60 HT8060YY $680 $850 $997 $1, January 1, 2013

55 A1 FABRIC HALF GLAZED PANEL - NO RACEWAY Product Description Upper section glazed, lower section fabric covered hard surface panel. Includes (1) panel. PANEL CONNECTORS MUST BE ORDERED SEPARATELY. Top Cap - Metal Construction, the Top Cap finishes the top of the panel and is factory installed. Glazed face - Is translucent acrylic insert. Width Hanger Frame - Heavy gauge slotted steel rail to accommodate hanging components. Panel face - Is fabric covered hard surface. 31" Open Market Only Not on GSA Schedule Actual Dimensions Depth (Thickness) 2" Width 24", 30", 36", 42" & 48" Height (Minimum) 62" & 80" 92 January 1, 2013

56 A1 FABRIC HALF GLAZED PANEL - NO RACEWAY HALF GLAZED FABRIC PANEL WITH CHOICE OF BRONZE OR CLEAR GLAZING * Product number. * Order Finished End (Pg. 67) to finish exposed panel end. * Trim color YY (BU, DT, HT, LG, LT, MT) * Order Panel Connectors (Pgs ) * Glazing color (BR= Bronze, CL= Clear). * Fabric yardage estimate is for directional application (minmum 66" usable width). * Special fabrics may affect yardage requirements. PANEL WITH BRONZE GLAZING DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST REQ'D 62 x 24 MGBR.6224YY $1,236 $1,254 $1,315 $1, x 30 MGBR.6230YY $1,249 $1,270 $1,382 $1, x 36 MGBR.6236YY $1,262 $1,286 $1,398 $1, x 42 MGBR.6242YY $1,519 $1,548 $1,660 $1, x 48 MGBR.6248YY $1,836 $1,868 $1,980 $2, x 24 MGBR.8024YY $1,374 $1,414 $1,488 $1, x 30 MGBR.8030YY $1,389 $1,425 $1,571 $1, x 36 MGBR.8036YY $1,390 $1,441 $1,587 $1, x 42 MGBR.8042YY $1,763 $1,815 $1,961 $2, x 48 MGBR.8048YY $2,057 $2,108 $2,255 $2, Open Market Only Not on GSA Schedule PANEL WITH CLEAR GLAZING DIMENSION: ITEM FABRIC Q FABRIC FABRIC FABRIC YDG WEIGHT H x W NUMBER COM LIST GRADE 1 LIST GRADE 2 LIST GRADE 3 LIST REQ'D 62 x 24 MGCL.6224YY $1,236 $1,254 $1,315 $1, x 30 MGCL.6230YY $1,249 $1,270 $1,382 $1, x 36 MGCL.6236YY $1,262 $1,286 $1,398 $1, x 42 MGCL.6242YY $1,519 $1,548 $1,660 $1, x 48 MGCL.6248YY $1,836 $1,868 $1,980 $2, x 24 MGCL.8024YY $1,374 $1,414 $1,488 $1, x 30 MGCL.8030YY $1,389 $1,425 $1,571 $1, x 36 MGCL.8036YY $1,390 $1,441 $1,587 $1, x 42 MGCL.8042YY $1,763 $1,815 $1,961 $2, x 48 MGCL.8048YY $2,057 $2,108 $2,255 $2, January 1, 2013

57 A1 DOOR PANEL - NO RACEWAY PANEL CAN BE ORDERED WITH A LEFT OR RIGHT HAND SWINGING DOOR. ORDER DOOR FOR USE WITH AO1 PANELS ONLY THAT HAVE EITHER NO WIRE MANAGEMENT OR USE AO1 WIRE MANAGEMENT. * Product number. * Includes laminated door, bronze or clear glazed side panel, painted * Door color - (DT, HT, LG, LT, MT) steel frame and locking door knob with hardware. * Trim color YY (BU, DT, HT, LG, LT, MT) * Shipped assembled, except for lockset. * Bronze or clear glazing. * Lock set must be field installed. ITEM ITEM HEIGHT WIDTH LIST WEIGHT DESCRIPTION NUMBER PRICE For Use Without Wire Management LEFT-HAND DOO HMDPAL.8048YY 80" 48" $3, RIGHT-HAND DO HMDPAR.8048YY 80" 48" $3, " 12" 80" or 83" 36" Left Hand Swing Right Hand Swing 94 January 1, 2013

58 A1 PANEL CONNECTORS - NO RACEWAY * Product number. * Trim color YY (BU, DT, HT, LG, LT, MT) TWO WAY 90 CONNECTOR CONNECTS TWO PANELS AT 90 DEGREES. DIMENSIONS ITEM LIST WEIGHT HEIGHT NUMBER PRICE 34" HM2C.34YY $ " HM2C.42YY $ " HM2C.48YY $ " HM2C.62YY $ " HM2C.80YY $170 9 THREE WAY CONNECTOR CONNECTS THREE PANELS AT A T. DIMENSION: ITEM WEIGHT HEIGHT NUMBER 34" HM3C.34YY $ " HM3C.42YY $ " HM3C.48YY $ " HM3C.62YY $ " HM3C.80YY $ FOUR WAY CONNECTOR CONNECTS FOUR PANELS AT AN INTERSECTION. DIMENSION: ITEM WEIGHT HEIGHT NUMBER 34" HM4C.34YY $ " HM4C.42YY $ " HM4C.48YY $ " HM4C.62YY $ " HM4C.80YY $ TWO WAY 180 DEGREE CONNECTOR JOINS PANELS OF EQUAL OR UNEQUAL HEIGHTS FOR DIMENSIONAL GAIN. DIMENSION: ITEM WEIGHT HEIGHT NUMBER 34" HM180C.34YY $ " HM180C.42YY $ " HM180C.48YY $ " HM180C.57YY $ " HM180C.62YY $ " HM180C.80YY $ January 1, 2013

59 A1 PANEL CONNECTORS - NO RACEWAY * Product number. * Trim color YY (BU, DT, HT, LG, LT, MT) PANEL CONNECTOR ROD - DT ONLY USED TO CONNECT TWO PANELS IN A STRAIGHT LINE. DIMENSIONS ITEM LIST WEIGHT HEIGHT NUMBER PRICE 34" HMPC.34 $ " HMPC.42 $ " HMPC.48 $ " HMPC.62 $ " HMPC.80 $40 2 T-CONNECTOR (WALL START) CONNECTS PANEL TO AN EXISTING STRUCTURAL WALL TO BEGIN A PANEL RUN INCLUDES ONE (1) CONNECTOR ROD (SEE ABOVE) ORDER WALL FASTENERS (See Below) SEPARATELY. DIMENSION: ITEM LIST WEIGHT HEIGHT NUMBER PRICE 34" HMTC.34YY $ " HMTC.42YY $ " HMTC.48YY $ " HMTC.62YY $ " HMTC.80YY $107 9 ANCHOR KIT (4) HMWF.4 $17 2 FINISHED END FINISHES EXPOSED PANEL END. DIMENSION: ITEM LIST WEIGHT HEIGHT NUMBER PRICE 34" HMEC.34YY $ " HMEC.42YY $ " HMEC.48YY $ " HMEC.62YY $ " HMEC.80YY $ January 1, 2013

60 A1 PANEL COMPONENTS * Product number. * Trim color YY (DT, HT, LG, LT, MT), NOT AVAILABLE ON WALL STRIPS WALL HANGER STRIP HIGH QUALITY BRUSHED ALUMINUM EXTRUSIONS, WITH HEAVY DUTY 16 GAUGE STEEL SLOTTED INSERT IS USED TO HANG COMPONENTS OR WORK SURFACES DIRECTLY FROM A WALL. ORDER WALL FASTENERS (SEE BELOW) SEPARATELY. NATURAL ALUMINUM COLOR ONLY PRICING IS PER STRIP, PICTURE SHOWS APPLICATION ONLY. ITEM DESCRIPTION 60" WALL HANGER STRIP 72" WALL HANGER STRIP 84" WALL HANGER STRIP ITEM LIST WEIGHT NUMBER PRICE HMWHS.60 $95 Each Strip 4 HMWHS.72 $102 Each Strip 4 HMWHS.84 $112 Each Strip 4 WALL FASTENERS USE TO FASTEN A T-CONNECTOR OR WALL HANGER STRIP TO AN EXISTING WALL.. ITEM ITEM LIST WEIGHT DIMENSION NUMBER PRICE 3/16 TOGGLE BOLT ANCHOR HMWF.1 $3 1 3/16 x 3 FLAT HEAD TOGGLE BOLT HMWF.2 $1 1 ANCHOR KIT (12) HMWF.3 $51 12 VARIABLE HEIGHT FILLER STRIP - RIGID FINISHES EXPOSED END OF CONNECTOR OR PANEL WHEN JOINING PANELS OF DIFFERENT HEIGHTS. CUT TO LENGTH AS REQUIRED. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE VARIABLE HEIGHT PKG - 4 LENGTH HMVHYY $ January 1, 2013

61 MIRAGE PEDESTALS AND COMPONENTS CONSTRUCTION All-welded ld d steel frame construction, formed in key areas for strength. Inner top and side panels consist of gauge cold-rolled steel. Outer wrapper and drawer bin are 22 gauge, drawer fronts are 20 gauge steel. Vertical and Horizontal steel channels are reinforced for stability. Files and Pedestals include 4 leveling glides to insure proper drawer operation. Products are designed to meet or exceed BIFMA Standards. Lateral Files require counterweights to meet BIFMA Standards LOCKS Pedestals include LL Series, silver-faced, master-keyed, core removable locks. Cabinets are shipped with randomly-assigned keys and cores. For key-alike requests. There is a service charge for this. Key alikes must be ordered d at time of order entry or additional cost will apply Key alikes must be ordered at time of order entry or additional cost will apply FINISHES Standard metal finishes are either an epoxy polyester powder, electrostatically applied, or a high-solids baked enamel paint finish. (Color Dependent) COUNTERWEIGHTS Freestanding, mobile and cushion peds are shipped with a counterweight installed. Counterweights are not necessary for worksurface supporting and hanging pedestals. Freestanding desking pedestals include a counterweight installed to ensure desk stability. SUSPENSION Steel Ball Bearing Full Suspension File Drawers. Box Drawers are 3/4 roller bearing suspension. 6" drawer dividers, 12" drawer dividers that allow for side-to-side filing, and pencil trays are sold separately. 98 January 1, 2013

62 MIRAGE METAL FRONT PEDESTALS * Product number. * Pedestals come with a lock and have radius * Product color - YY (BU, DT, HT, LG, LT, MT) metal drawer fronts. * All files are wide. * Box drawers have ball-bearing slides. * File drawers have full extension. * Support Pedestals have fully adjustable 1 leveling legs. METAL FRONT PEDESTAL HANGING PEDESTAL BOX/FILE 18"D HP18.612YY $ BOX/FILE 22"D HP.612YY $ WORK SURFACE SUPPORTING PEDESTAL 27.75" H 18" DEEP FILE/FILE WSP YY $ BOX/BOX/FILE WSP YY $ " DEEP FILE/FILE WSP.1212YY $ BOX/BOX/FILE WSP.6612YY $ " DEEP FILE/FILE WSP YY $ BOX/BOX/FILE / WSP YY $ MOBILE PEDESTAL 27"H 22" DEEP BOX/FILE MP.612YY $ FILE/FILE MP.1212YY $ BOX/BOX/FILE MP.6612YY $ " DEEP FILE/FILE MP YY $ BOX/BOX/FILE MP YY $1, DRAWER DIVIDER FOR METAL PEDESTALS METAL PARTITION SLIDES INTO PRE-MEASURED AND PRE-CUT DRAWER SLOTS. FINISH: BLACK ONLY. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE BOX DIVIDER - 6" BDD $16 1 FILE DIVIDER - 12" FDD $23 1 UTILITY TRAY - 6" UT6 $19 1 KEY ALIKE OPTION FOR PEDESTALS/FILES/CABINETS/FLIPPER / / DOORS. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE Key Alike HMKA $ January 1, 2013

63 MIRAGE METAL STORAGE CABINETS AND TOWERS * Product number. * Files are equipped with center lock, full extension slides, and * Product color - YY (BU, DT, HT, LG, LT, MT) leveling legs. * Includes drawer interlock feature. * Meets or exceeds BIFMA standards. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE STORAGE CABINETS 36"W 17 3/8"D 2 HIGH UNIT 28 HMEST.2836 $1, HIGH UNIT 40 HMEST.4036 $1, HIGH UNIT 52 HMEST.5236 $1, HIGH UNIT 64 HMEST.6536 $2, Replacement ShHMEST.SHELF36 $ ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE STORAGE TOWERS 24"W 3 DRAWER, 25" SIDE CABINET Tower w 3 File Drawer 64"h LH HMESWL.6524FFF $3, STORAGE UNIT One Adjustable Shelf One Adjustable Shelf Tower with 3 File Drawer HMESWR.6524FFF $3, rage Coat Sto File Drawer File Drawer File Drawer File Drawer File Drawer File Drawer rage Coat Sto LH RH STORAGE TOWERS 24"W 2 DRAWER, 37" SIDE CABINET 4 STORAGE UNIT Tower w 2 File Drawer 64"h LH HMESWL.6524FF $3, Two Adjustable Shelves Two Adjustable Shelves Tower with 2 File Drawer HMESWR.6524FF $3, Coat Storage File Drawer File Drawer File Drawer File Drawer Coat Storage LH RH STORAGE TOWERS 24"W 2 BOX DRAWERS, 1 FILE DRAWER, 37" SIDE CABINET 2 BOX/FILE STORAGE UNIT Tower w 2 Box 1 File Drawer Tower w 2 Box 1 File Drawer HMESWL.6524BBF $3, HMESWR.6524BBF $3, KEY ALIKE OPTION FOR PEDESTALS/FILES/CABINETS/FLIPPER DOORS. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE RH LH Key Alike HMKA $ January 1, 2013

64 MIRAGE METAL BOOKCASES AND WARDROBE CABINET * Product number. * Files are equipped with center lock, full extension slides, and * Product color - YY (BU, DT, HT, LG, LT, MT) leveling legs. * Includes drawer interlock feature. * Meets or exceeds BIFMA standards. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE BOOKCASE UNITS 36"W 13 3/8"D 2 HIGH UNIT 28" HMEBT.2836 $1, HIGH UNIT 41" HMEBT.4136 $1, HIGH UNIT 54" HMEBT.5436 $1, HIGH UNIT 66" HMEBT.6736 $1, HIGH UNIT 79 HMEBT.7936 $1, Replacement Shelf HMEBT.SHELF36 $98 12 ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE WARDROBE UNIT WITH COAT ROD 36"W 13 3/8"D 5 HIGH UNIT 64" HMESW.6536 $2, no shelves KEY ALIKE OPTION FOR PEDESTALS/FILES/CABINETS/FLIPPER DOORS. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE Key Alike HMKA $ January 1, 2013

65 MIRAGE METAL FRONT LATERAL FILES * Product number. * Files are equipped with center lock, full extension slides, and * Product color - YY (BU, DT, HT, LG, LT, MT) leveling legs. * Includes drawer interlock feature. * Meets or exceeds BIFMA standards when used with counterweight or anchored to wall. TWO DRAWER LATERAL 27 3/4"H 17 3/8"D DIMENSION: ITEM LIST WEIGHT WIDTH NUMBER PRICE 30" 2DLF.30YY $1, " 2DLF.36YY $1, " 2DLF.42YY $1, TWO DRAWER WITH COUNTERWEIGHT 30" 2DLFC.30YY $1, " 2DLFC.36YY $1, " 2DLFC.42YY $1, THREE DRAWER LATERAL 39 3/4"H 17 3/8"D DIMENSION: ITEM LIST WEIGHT WIDTH NUMBER PRICE 30" 3DLF.30YY $1, " 3DLF.36YY $1, " 3DLF.42YY $1, THREE DRAWER WITH COUNTERWEIGHT 30" 3DLFC.30YY $1, " 3DLFC.36YY $2, " 3DLFC.42YY $2, FOUR DRAWER LATERAL 52"H 17 3/8"D DIMENSION: ITEM LIST WEIGHT WIDTH NUMBER PRICE 30" 4DLF.30YY $1, " 4DLF.36YY $2, " 4DLF.42YY $2, FOUR DRAWER WITH COUNTERWEIGHT 30" 4DLFC.30YY $2, " 4DLFC.36YY $2, " 4DLFC.42YY $2, FIVE DRAWER LATERAL 64"H 17 3/8"D, INCLUDES COUNTERWEIGHT DIMENSION: ITEM LIST WEIGHT WIDTH NUMBER PRICE 30" 5DLF.30YY $2, " 5DLF.36YY $2, " 5DLF.42YY $3, FILE CENTER 18 1/2" Deep DIMENSION: ITEM LIST WEIGHT WIDTH NUMBER PRICE 30.5" FC YY BBF/LAT30 $1, " FC YY FF/LAT30 $1, " FC YY BBF/LAT36 $1, FC LATERAL FILE CONVERSION BAR - BK ONLY LFCB $8 1 Bars Needed: 30" 2 per drawer 36" 2 per drawer 42" 2 per drawer legal, 4 per drawer letter. KEY ALIKE OPTION FOR PEDESTALS/FILES/CABINETS/FLIPPER DOORS. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE FC Key Alike HMKA $ January 1, 2013

66 MIRAGE ACCESSORIES * Product number. * Tasklight includes a switch, 9' power cord assembly * Product color - BK-BLACK ONLY and fluorescent bulb. * For use under standard 12 deep Shelf. TASKLIGHT COMPLETE WITH MOUNTING BRACKETS - READY TO INSTALL LED Task Light includes magnets and screw holes for mounting. Daisy Chain up to four lights DIMENSION: ITEM LIST WEIGHT LENGTH NUMBER PRICE 21.5" TL.24BK $194 7 For 24" and 30" Shelves 33.5 TL.36BK $208 9 For 36" and 42" Shelves 48.5 TL.48BK $ For 48" and 60" Shelves UI AL LED Kit, Includes Light and $317 9 UI AL LED Light $200 4 UI Power Pack $141 5 UI " Daisy Charin $13 1 UI " Daisy Charin $19 1 CORD MANAGER 3/4" EXTRUDED PLASTIC LATCH CHANNEL IS USED TO CONCEAL CORDS ABOVE OR BELOW WORK SURFACE. AVAILABLE IN 4' LENGTHS. BLACK ONLY. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE CORD MANAGER ACM.4 $24 1 PAPER MANAGEMENT TOOL BAR WITH VARIOUS ATTACHING COMPONENTS CAN BE USED FOR ORGANIZING A WORK AREA BY CREATING ACCESSIBLE STORAGE ABOVE THE WORK SURFACE. TOOL BAR IS MADE OF EXTRUDED ALUMINUM. COMPONENTS ARE INJECTION MOLDED, HIGHLY DURABLE PLASTIC. ITEM ITEM LIST WEIGHT * Product number. DESCRIPTION NUMBER PRICE * Product color YY (BK) 24" WIDE TOOL BAR ATB.26BK $ " WIDE TOOL BAR ATB.30BK $ " WIDE TOOL BAR ATB.36BK $ " WIDE TOOL BAR ATB.42BK $ " WIDE TOOL BAR ATB.48BK $197 4 Tool Bar 60" WIDE TOOL BAR ATB.60BK $251 4 Paper Tray 10" WIDE PAPER TRAY APT.YY $28 1 HANGING FILE FOLDER HOLDER AHFF.YY $16 1 FOLDER HOLDER AFH.YY $54 1 Folder Holder BINDER HOLDER ABH.YY $28 1 Binder Holder PENCIL HOLDER APH.YY $16 1 Pencil Holder 103 January 1, 2013

67 MIRAGE ACCESSORIES * Product number. * Includes hardware for mounting. * Product color - BK-Black Only PENCIL DRAWER DRAWER HAS FOUR COMPARTMENTS CONSTRUCTED FROM STURDY FORMED PLASTIC, WITH EASY MOUNTING BALL BEARING DRAWER SLIDES. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE PENCIL DRAWER HMPDBK $93 4 FOR THE COMPUTER: * Product number. * Mounts easily under the worksurface providing additional work area and * Product color Black only. added computer operator support. KEYBOARD TRAYS INCLUDES A FULLY ARTICULATING ARM - 15 DEGREE TILT, 5.75 UP/DOWN, IN/OUT. ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE ADJUSTABLE ARTICULATING KEYBOARD WITH WRIST REST AKBTWR $ KEYBOARD WITH WRIST REST AND SWIVEL MOUSE AKBTWRSM $ KEYBOARD WITH WRIST REST AND SWIVEL/TILT MOUSE AKBTWRSMT $ PERIPHERAL ACCESSORIES ITEM ITEM LIST WEIGHT DESCRIPTION NUMBER PRICE CPU HOLDER CPU $ January 1, 2013