F Load. Load. Load Braga Drive, Broadview, IL t: f: Toll-Free (U.S.A)
|
|
- Leonard Miles
- 5 years ago
- Views:
Transcription
1 naval
2 wire rope isolators: naval polycal efinition series NMP wire rope isolators: naval polycal performance ata series NMP Bar Bar naval polycal isolator from the NMP series D E E materials an finishes Cable: AISI 6 Retainer Bars: aluminum alloy Insert: L L D/D L V Dimensions are in inches. or reference only. N M P U type H U V weight G Dimensions H U V L L L E E G D D weight type (in) lbf / / / /-.5 H All metal multiirectional vibration/shoc isolators Exceptional reliability an lifetime High amping No aging Corrosion resistant range: -90 to +570 Non-magnetic Low resiual acceleration Three mounting points Custom materials, sizes, an number of loops available Interfaces fixture holes D/D A M for metric Bar through hole option: D insert Loa Loa Loa / Deflection Deflection / Deflection / / NMP NMP NMP Compression an Tension Moel lbf in lbf in a in f Hz lbf in lbf in a in f Hz Compression Tension Compression/Roll 45 an Tension/Roll 45 Moel lbf in lbf in a in f Hz lbf in lbf in a in f Hz Comp/Roll 45 Tension/Roll 45 Moel lbf in lbf in a in f Hz Max static loa () with corresponing eflection (). Max shoc loa () with corresponing eflection (). Uncouple resonant frequency (f) uner max static loaing an max pea to pea sinusoial vibration input (a) *Important: Performance characteristics are given here for reference only. They can be increase uner specific conitions. Contact us / /8-4.4 Bar Typical shoc/vibration specifications: / /8-6.0 Groun orces GAM EGA, SET 00, MIL-STD-80, VG 95 Air AIR 706, MIL-E-5400, MIL-C-7, MIL-STD-80 Marine GAM EGC, IT5-/96-/5-86, MIL-S-67, MIL-S-90, STANAG 04, BV 04.7, BV 044, NAV00 Others GAM EMB, GAM EMBT4, DE STAN 07-55, IEC 57, INABEL C Braga Drive, Broaview, IL t: f: Toll-ree (U.S.A) 44 Braga Drive, Broaview, IL vibro@vibroynamics.com 6 NMP_5
3 wire rope isolators: naval half helical efinition series NHH wire rope isolators: naval half helical performance ata series NHH Bar Bar materials an finishes Cable: AISI 6 Retainer Bars: aluminum alloy or AISI 6 Screws/Inserts: alloy steel/zinc plate L I Dimensions are in inches. or reference only. naval half helical isolator from the NHH series N H H 0 0 I E D type H W L weight Number of loops: series stanar is 4 loops Dimensions H W L I E G D D weight type (in) lbf / / / / / / / / / G W H D inserts in bars an I Interfaces fixture holes D/D ( per bar) A M for metric Bar Bar T countersun 8 stanar TC C countersun 8 D inserts All metal multiirectional vibration/shoc isolators Exceptional reliability an lifetime High amping No aging Corrosion resistant range: -90 to +570 Non-magnetic Low resiual acceleration Custom materials, sizes, an number of loops available D inserts stanar stanar TI CI I Loa Loa Loa / Deflection / Typical shoc/vibration specifications: Deflection / Deflection / NHH NHH NHH Compression an Tension Moel ipf in ipf in a in f Hz ipf in ipf in a in f Hz Compression/Roll 45 an Tension/Roll 45 Moel ipf in ipf in a in f Hz ipf in ipf in a in f Hz Groun orces GAM EGA, SET 00, MIL-STD-80, VG 95 Air AIR 706, MIL-E-5400, MIL-C-7, MIL-STD-80 Marine GAM EGC, IT5-/96-/5-86, MIL-S-67, MIL-S-90, STANAG 04, BV 04.7, BV 044 Others GAM EMB, GAM EMBT4, DE STAN 07-55, IEC 57, INABEL C Compression Tension Comp/Roll 45 Tension/Roll 45 Moel lbf in ipf in a in f Hz Max static loa () with corresponing eflection (). Max shoc loa () with corresponing eflection (). Uncouple resonant frequency (f) uner max static loaing. an max pea to pea sinusoial vibration input (a) *Important: Performance characteristics are given here for reference only. They can be increase uner specific conitions. Contact us. 44 Braga Drive, Broaview, IL Braga Drive, Broaview, IL t: f: Toll-ree (U.S.A) vibro@vibroynamics.com 6 NHH_5
4 leaf spring elastomeric isolators: X efinition series LSX leaf spring elastomeric isolators: X efinition series LSX Multiirectional vibration/ shoc isolators isplacement:.4 in Raial isplacement:.6 in Transmissibility: < Q < 6 Longituinal transmitte acceleration: < 5g /transversal transmitte acceleration: < 5g range: -5 to +05 v LSX requency Deflection Moel S f c Hz f v Hz in in s lbf/in Minimum stiffness an strength of support plate Strength lbf Dimensions are in inches. or reference only. H A LSX requency Horizontal Across Moel S f c Hz f v Hz s lbf/in L S X - 0 Minimum stiffness an strength of support plate Strength lbf leaf spring isolator from the LSX series type NATO stoc number LSX Horizontal Roll Moel S materials an finishes Loas an Dimensions static loa (lbf) A B C D (D) E weight type min nom max (in) (lbf) NATO stoc number / H R requency f c Hz f v Hz s lbf/in Leaf an Washer: Compoun: epoxy resin Coating: neoprene paint / / / / Minimum stiffness an strength of support plate Strength lbf / / / S / Typical Applications uel tans, engines, seats, marine craft installations, ammunitions, generator sets, compressors, pumps, fans, air conitioning units, electric motors, electronic control equipment, laboratory equipment.... frequency (f v ) an shoc natural frequency (f c ). eflection min ( ) an max ( ) at nominal loaing. Minimum stiffness (K) an strength () of the support structure to which a mount is attache *Important: Performance characteristics are given here for reference only. They can be increase uner specific conitions. Contact us. *A M for metric 44 Braga Drive, Broaview, IL Braga Drive, Broaview, IL t: f: Toll-ree (U.S.A) vibro@vibroynamics.com 65 LSX_5
5 leaf spring elastomeric isolators: Y Dimensions are in inches. or reference only. leaf spring isolator from the LSY series materials an finishes Leaf an Washer: () - Polishe (NP) - Raw Compoun: epoxy resin Bushing: nylon Coating: neoprene paint L S Y - 0 type A B C weight Loas an Dimensions efinition series LSY Multiirectional antivibration/shoc isolators Structure-borne noise isolation Displacement uner shoc up to.4 in along vertical irection an.6 in along raial irection Transmissibility: <Q<6 Transmitte acceleration limite to 5g along longituinal irection an 5g along vertical an transversal irection range: -5 to +05 static loa (lbf) A B C D E G H I J weight type min nom max (in) (lbf) / / / / /8-6.. / /8-6.. / /8-6.. / / / /8-..5 / /8-..5 / *A M for metric Braga Drive, Broaview, IL t: f: Toll-ree (U.S.A) 67 LSY_5
1,5 1,5 W W W. height H (mm) length L (mm) width W (mm) A X S
definition series AX2 M4 M4 M4 1,5 1,5 1,5 L H L H L H 1,5 1,5 1,5 7 7 7 All metal multidirectional anti-vibration/shock mounts. Exceptional reliability and long life. High damping. No ageing. Corrosion
More informationTable of content. Exhaust equipment. Shock mountings. Cable mountings. Sandwich mountings
Table of content Exhaust equipment 1.1 Shock elements for exhaust systems Page 2 1.2 Shock absorbing stabilizers RD1 Page 3 1.3 Shock absorbing stabilizers RD2 Page 4 1.4 Shock mounting type RDS-B Page
More informationV MOUNT SERIES. Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations.
V MOUNT SERIES Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations. APPLICATIONS Class 6,7,8 truck engines Bus engines Off-highway vehicle engines On & off-highway
More informationLinear Bearing General Information
1 Linear Bearing General Information 1-1 Characteristics of HIIN Linear Bearing HIIN linear bearings enable high precision linear motion on roun shafts by utilizing recirculating ball pathways. The patente
More informationToll Free: 877/ Fax: 814/
Low Profile Avionics Mounts (AM ) Low profile, all-direction vibration and shock mounts for avionics equipment and other sensitive devices Lord Corporation low profile Avionics Mounts (AM ) set the standard
More informationTecnodinAntivibrationMounts
TecnoinAntivibrationMounts Page Page 105 110 105 111 106 111 106 111 107 112 107 112 107 112 108 108 109 109 110 www.tecnoin.com 4 1 0 1 R A P I O A N T I - V I B R A T I O N M O U N T Coe e C Ce e 410108012
More informationWIRE ROPE ISOLATORS C/CB SERIES APPLICATIONS HELICAL WIRE ROPE ISOLATORS FEATURES & BENEFITS
0.03-1.50 APPLICATIONS HELICAL The C/CB Series isolators are made up of helical, stranded-wire rope held with rugged metal retaining bars. This design provides excellent shock and vibration isolation in
More informationSHOCK ABSORBERS SHOCK ABSORBERS.
SHOCK ABSORBERS SHOCK ABSORBERS Visit : E-mail : www.theallpowersource.com lp we com info@theallpowersource.com I ABOUT US The Allpower Source (TAS) is a division of Technology Dynamics Inc. (TDI) in Bergenfield
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationE2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
More information60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33 Restraine Flexible Coupling For Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33 carbon steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationRING & BUSHING MOUNTS
RING & BUSHING MOUNTS Ring and bushing isolators are versatile, low cost mounts that can satisfy many vibration control problems. They are rugged, low-cost isolators easily installed. Ring and bushing
More informationLinear Bearing CONTENTS
Linear Bearing CONTENTS 1. Characteristics of Linear Bearing.... 2 2. Description... 2 3. Fitting... 3 4. Configuration an Specifications... 5 1. Inch AB Series: Stanar Close type, Clearance Ajustable,
More informationProximity Transmitters, and Seismic Vibration Transmitters
TM016 Velocity/ Acceleration Vibration Transmitter Introduction The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
More informationMounting hardware and accessories
Mounting hardware and accessories Mounting considerations Surface Wilcoxon s rugged sensors are designed to operate continuously in harsh industrial environments. Consideration of mounting surface and
More informationLinear Bearing. 1. Linear Bearing General Information. 2. Configuration and Specifications. 1-1 Characteristics Description...
Linear Bearing 1. Linear Bearing General Information 1-1 Characteristics... 1 1-2 Description... 1 1-3 Fitting... 2 2. Configuration an Specifications 2-1 Metric Dimensuon 2-1-1 UB Series: Stanar Close,
More informationKeyless Locking Devices
Keyless ocking evices IC 100 IC 100 s N/ 2 17 47 20 26 6 16 260 31 104 18 47 20 26 6 16 280 31 104 19 47 20 26 6 16 290 31 104 20 47 20 26 6 16 310 31 104 22 47 20 26 6 16 340 31 104 24 50 20 26 6 16 370
More informationProximity Transmitters, and Seismic Vibration Transmitters
Introduction TM016 Velocity/ Acceleration Vibration Transmitter The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
More information22000 MOUNT SERIES. Features. Benefits. Load Range. Low-profile, high capacity mounts for vibration and shock protection.
2 MOUNT SERIES Low-profile, high capacity mounts for vibration and shock protection. Features Fail-safe when used with snubbing washer Axial to radial stiffness of 1:1 Low natural frequency Sturdy, reliable
More informationModel LIDA. DIRECT DRIVE TUBEAXIAL FANS Model LIDA DIRECT DRIVE TUBEAXIAL FANS SECTION 12. Application. Options/Accessories
IRECT RIVE TUBEAXIAL FANS Model LIA Model LIA IRECT RIVE TUBEAXIAL FANS SECTION 12 Application Carnes Company tubeaxial fans offer one of the widest ranges of sizes, horsepower and performance in the industry.
More informationSPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
More informationLinear Bearing CONTENTS
B99TE4-112 Lear Bearg CONTENTS 1. Lear Bearg Generial Information Characteristics...1 Description... 1 Fittg... 2 2. Configuration an Specifications 2.1 Inch Dimention AB Series: Stanar Close type, Clearance
More information60.03 Style 231 Non-Restrained Flexible Expansion Coupling
Style 31 Non-Restraine Flexible Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 31 carbon steel expansion couplings (formerly Depen-O-Lok FxE) provie a non-restraine, flexible pipe joint that is esigne
More informationOPTOTHYRISTOR MODULES OF SINGLE- AND THREE-PHASE RECTIFIER BRIDGES MO20(A), MO21(A), MO22(A), MO23(A), MO24(A) USER S MANUAL
ELECTRUM AV 01.01.013 MO0,1,,3,.oc www.electrum-av.com OPTOTHYRISTOR MODULES OF SINGLE- AND THREE-PHASE RECTIFIER BRIDGES MO0(A), MO1(A), MO(A), MO3(A), MO(A) USER S MANUAL 5 Naugorskoe highway, Orel,
More informationAmerican Cylinder Co., Inc. Catalog LSC 1108-E
0 011 American Cylinder Co., Inc. Catalog LSC 1108-E TABLE OF CONTENTS Table of Contents... age 1 How to Order... age 1 hysical ata... age 1 Standard Features and Benefits... age Engineering ata... age
More informationSTROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
More informationThe FMM force tester can be controlled using L1 software for limit, cycling, hold and coefficient of friction testing.
FMM FMM may be used with L1 software or with a Starrett DFC or DFG digital force gage. FMM digital force testers are compact and ideal for highvolume, lean manufacturing production. FMM testers are available
More information60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationLinear Ball Bearings, Shafting & Supports Overview
Linear Ball Bearings, ing & Supports Overview Linear Ball Bearings, ing & Supports high performance linear ball bearings, shafting an shaft supports are now available from PTI. Available in Inch an Metric
More informationRM Flexible Disc Coupling
RM Flexible isc RM Selection ata apacity (kw/rpm 1 Torque (knm....6. (RPM (kg ( kgm.g. (MNm/rad (MNm/rad/m (kgm ( kgm. 1.. 6.... 1 1. 6 9. 1 6.. 9.1. 1 1. 6 1... 9.1. 6 1.... 1.1 6 1. 9. 1. 1.1 1. 6..
More informationTABLE OF CONTENT. Single Row Radial Ball Bearings. Female Rod Ends. Male Rod Ends. Spherical Plain Bearings with PTFE Liner. Solid Type Shaft Collar
Since 001, GR earings, a 100% Canaian family owne company, has been a successful bearing supplier to Distributors an OEMs across Canaa. Our bearings are mainly importe from carefully selecte manufacturers
More informationProximity Transducers, Seismic Sensors and Accessories
ProvibTech s Case Mount Sensors Selection Guide Model Number Sensitivity TM0782A TM0783A TM0786A General Purpose Accelerometer TM0784B TM0793V TM079VD Low Power Accelerometer Velocity Transducer 100 mv/g
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1
More informationHKK CURVED JAW COUPLINGS HITEX COUPLINGS
HKK CURVE JAW COUPINGS HITEX COUPINGS CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN 740-2. Proper imensioning of the coupling shoul be one to ensure that
More informationVIBRATION TEST SYSTEMS. Selection Guide
VIBRATION TEST SYSTEMS Selection Guide Vibration Testing Equipment The System at a glance As a worldwide supplier of measuring and testing systems for industry and research, TIRA operates from a number
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationKUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83
CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are
More information1.1 Shock elements for exhaust systems Page Shock absorbing stabilizers RD1000 Page Shock absorbing stabilizers RD2000 Page 4
Table of content. Exhaust equipment. 1.1 Shock elements for exhaust systems Page 2 1.2 Shock absorbing stabilizers RD1 Page 3 1.3 Shock absorbing stabilizers RD2 Page 4 1.4 Shock mounting type RDS-B Page
More informationHighest Performance: SPH Series
Highest Performance: SPH Series The SPH series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special
More informationExcitation system is of Static Silicon Excitation System, including excitation transformer, thyristors, and AVR.
Turbo - Generator Type: QF Series 1. General The generator is a two pole, cylindrical rotor type synchronous machine, directly coupled with steam turbine. It has a closed-circuit cooling system to cool
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.
More informationShaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B
Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings
More informationHighest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
More informationCENTER-BONDED MOUNTS. Center-Bonded Mounts. Page 51 of 124
Page 51 of 124 Center-Bonded Mounts Featuring: CB-1100 Series CB-1180 Series CBA Series CBA-50 Series STA Series Safetied Tubeform Series LORD Center-Bonded Mounts isolate vibration, control shock and
More informationE3-22. FDD Round Diffuser, Displacement Air Pattern. Introduction: FDD UNDERFLOOR PRODUCTS F D D
E3 UNERLOOR PROUCTS Round iffuser, isplacement Air Pattern Introduction: Krueger s round displacement diffusers are designed to seamlessly integrate into any underfloor installation and can supplement
More information5 Bearing Preload and Rigidity
Technology>Precision>Innovation outer ring. 2)The contact surface pressure on the raceway surface reaches 4200Mpa or 428kgf/mm2 in either the inner or outer ring raceway. The allowable axial loa for each
More informationSpring Mounts Damped Type To 200 lbs.
Spring Mounts Damped Type To 200 lbs. CO MP O NE NTS MATERIAL: Base Plate Mild Steel Spring igh-tensile Steel - Phosphated & Dyed Black End Cap Cast Light Alloy STAINLESS STEEL MES FOR LOADS OF 60 TO 200
More informationExhaust gas temperature sensors MBT 5113 and MBT 5116
Data sheet Exhaust gas temperature sensors MBT 5113 and MBT 5116 Heavy-duty sensors used for measuring exhaust gas from diesel engines, turbines and compressors within stationary and marine applications.
More informationApplications (standard isolators) Applications (medium and heavy duty isolators ) Large generator sets. Isolator selection
General Standard isolators - Circular spring isolators type CR, CS, CM, CT and CX are available for a load range up to 12.45 kn at 25 mm deflection and up to 10.25 kn at 50 mm deflection. The helical spring
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More information...vibration isolation. Miscellaneous Parts
...vibration isolation Parts Anti-vibration Mounts engine l P2040 Rubber on silver zinc plated steel. Tecnical Notes Wit a bell-like base tis unit is suitable for supporting most applications, suc as engine
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationRotameters Rotameters
Rotameters Type 807 Rotameter - Polyamie omplete Assembly PV Socket Ens, EPDM Seals, Stanar Tube Stanar Float 98 807 622 ^ 98 807 60 ^ 0.22-2.20 98 807 62 ^ 98 807 6 ^ 0.44-4.40 2 98 807 624 ^ 98 807 62
More informationRM Flexible Disc Coupling
RM Flexible isc RM Selection ata ontinuous ontinuous Half Torsional Torque ( lb-in x Weight WR HP/ (in-lbs ( lb-in/rad x rad 1 1 4 4...4. 4 1.4 1... 4 1.... 4. 11 1.1 1 1..4.4 4 1 11 1.1 1.4.4 1 1. 11
More informationKEL DIFFERENTIAL PRESSURE FLOWMETERS
KEL DIFFERENTIAL PRESSURE FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Rugged Metal Construction Flow Rate to 2000 GPM Linear Scale For Horizontal or Vertical Pipes Threaded
More informationPlanetary Servo-reducer. SRP Range. The Machine Tool Drives Company
Planetary Servoreucer SRP Range The Machine Tool Drives Company 1 Range Overview SRP Planetary Servoreucer Versatile Drive solution Hightech planetary reucer + universal flange : multiuse solution Flexibility,
More informationVariable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
More informationcontents Therefore they perform under toughest sea conditions while meeting high-quality standards and visual criteria.
1 contents Hydraulic steering systems 2-8 Double cylindered steering systems 9-10 Horizontal windlasses 12-17 Vertical windlasses 18-24 Capstans 25-26 Hydraulic systems 27 Chain stoppers 28 Dimensions
More informationMitraset 19 Housings. Housing for electronic instruments
Housing for electronic instruments Mitraset 19 housings are in accordance with MIL-T 28800, MIL-STD 810 F, EIA and IEEE Standards and are designed to accommodate electronic devices in a 19 rack. They also
More informationCable Protection Solutions for Shielding Applications CATALOG LOCK 2013 VERSION 1.0
Cable Protection Solutions for Shielding pplications LOCK CTLOG 2013 VERSION 1.0 Cable Protection Solutions for Shielding pplications Electromagnetic interference (EI) is noise that may interrupt, obstruct,
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More information1291BL Series Technical Specification Single-Axis Rate and Positioning Table System
Datasheet 1291BL Series Technical Specification Single-Axis Rate and Positioning Table System DESCRIPTION The Model 1291BL Single Axis Positioning and Rate Table System is designed to provide precise position,
More informationisosteelpress Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA
H isosteelpress A www.isoplus.k Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA Toll Free: 877-474-5521 Office: 530-893-2444 Fax: 530-893-2244 info@biomasssystemssupply.com
More informationHydropuls Shock Absorber Test Machines Type MSP
Hyropuls Sock Absorber Test Macines Type MSP Hyropuls Sock Absorber Test Macines One, Two, Four or Six - Test as Many Sock Absorbers as You Wis Rie comfort an safety are amongst te most important criteria
More informationActive vibration reduction applied to the compressor of an air-conditioning unit for trams
Active vibration reduction applied to the compressor of an air-conditioning unit for trams J. Bös, E. Janssen, M. Kauba and D. Mayer Fraunhofer Institute for Structural Durability and System Reliability
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK High Post Contact: Enquiries +44 (0)1722 411611 Salisbury Tel: +44 (0)1722 428739 Wiltshire Fax: +44 (0)1722 428794 SP4 6AS E-Mail: ian.callender@chemringcm.com
More informationData sheet NK10... U DB_EN_NK10_SIL ST4-C 04/17. Fill Level Limiter. Functional security in compliance with DIN EN * *
ata sheet NK10... U0600 09005326 _EN_NK10_SIL ST4-C 04/17 *09005326* Fill Level Limiter Functional security in compliance with IN EN 61508 1 Prouct an functional escription FISCHER Mess- un Regeltechnik
More informationSize and Configurations
!!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent
More informationTechnical features. Types of combined bearings
OMBINE BEARINGS Tecnical features Types of combine bearings Naella combine neele bearings type RAX an erivatives are esigne to support simultaneously bot a raial an an axial loa. Tey comprise a neele trust
More informationPROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment
PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing
More informationUSING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION From small medical pumps to large diesel engines, vibration is unavoidable and dangerous if left unchecked in rotating and oscillating machinery.
More informationINDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks
More informationFour armature sizes. Simple. Powerful. Controllable.
One of the keys to the Warner Electric tensioning system is the Electro Disc tension brake. Electro Disc brake systems are capable of continuous slip from full roll to core diameter while providing outstandingly
More informationCentrifugal, Tubular Inline Fan, Model CIR
Centrifugal, Tubular Inline Fan, Model CIR TABLE OF CONTENTS 3 Introduction, Certifications & Listings 4 Features & Benefits 5 Options & Accessories 6 irect rive imensional & Performance ata 7 Belt rive
More informationLIGHTWEIGHT GEISLINGER GESILCO SHAFT
LIGHTWEIGHT GEISLINGER GESILCO SHAFT GEISLINGER GESILCO SHAFT The Geislinger Gesilco shaft product range is based on more than 20 years experience in developing fibre composite couplings and shafts. The
More informationDROP CEILING SAMPLE LAYOUT FOR FIXTURES WEIGHTING UP TO 400 LBS
MLS-400-THX-70-4C MOTORIZED SYSTEM FIXTURE LOWERING DEVICE DROP CEILING SAMPLE LAYOUT FOR FIXTURES WEIGHTING UP TO 400 LBS MOTOR SHOULD BE MOUNTED IN A LOCATION WITH EASY ACCESS. MOTOR SHOULD BE MOUNTED
More information1291BL Series Technical Specification Single Axis Position and Rate Table System
Datasheet 1291BL Series Technical Specification Single Axis Position and Rate Table System DESCRIPTION The Model 1291BL Single Axis Position and Rate Table System is designed to provide precise position,
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationPOWER SPEED REDUCTION UNITS FOR GENERAL AVIATION PART 5: HOUSING/CASING OPTIMIZED DESIGN FOR PROPELLER-DRIVEN AIRCRAFTS AND HELICOPTERS
POWER SPEED REDUCTION UNITS FOR GENERAL AVIATION PART 5: HOUSING/CASING OPTIMIZED DESIGN FOR PROPELLER-DRIVEN AIRCRAFTS AND HELICOPTERS Luca Piancastelli 1 an Stefano Cassani 1 Department of Inustrial
More informationIncremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
More informationAdhesive mounting base. Mounting method Accessory Type Advantages Disadvantages Remarks. Allows stud mounting, provides electrical isolation
ccessories Mounting accessories For acceleration sensors Type 84... 85... The most important consideration when installing an accelerometer on a test structure is to have a quality mounting surface for
More informationCATALOG
CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More information2.0 TEST PROCEDURES AND RESULTS Vibration Test TEST EQUIPMENT AND INSTRUMENTATION QUALITY ASSURANCE PROGRAM 7 ATTACHMENTS
Page No. 2 TABLE OF CONTENTS Page No. 1.0 INTRODUCTION 3 1.1 Scope 3 1.2 References 3 1.3 Test Specimen Description 3 1.4 Summary 3 2.0 TEST PROCEDURES AND RESULTS 4 2.1 Vibration Test 4 3.0 TEST EQUIPMENT
More informationPneumatic Grips MNC/ WEDGE type
Pneumatic Grips MNC/10-100 WEDGE type MNC Series Pneumatic Type Wedge Grips Movement centered with high pre-load Versions with capacities 10, 20, 50, 100kN To perform tensile tests on plastics, aluminum,
More informationStem Thermometers according to DIN Nitrogen Filled / Optional: Contacts
Stem Thermometers accoring to DIN 16205 Nitrogen Fille / Optional: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
More informationINFLUENCE OF SHOCK ABSORBER MODEL FIDELITY ON THE PREDICTION OF VEHICLE HALF ROUND PERFORMANCE Chris Masini Oshkosh Corporation Oshkosh, WI
2010 NDI GROUND VEHICLE SYSTEMS ENGINEERING ND TECHNOLOGY SYMPOSIUM MODELING & SIMULTION, TESTING ND VLIDTION (MSTV) MINI-SYMPOSIUM UGUST 17-19 DERBORN, MICHIGN INLUENCE O SHOC BSORBER MODEL IDELITY ON
More informationAdhesive mounting base. Mounting Method Accessory Type Advantages Disadvantages Remarks. Allows stud mounting, provides electrical isolation
ccessories Mounting ccessories for cceleration Sensors Type 84... 85... The most important consideration when installing an accelerometer on a test structure is to have a quality mounting surface for attachment.
More informationSTAINLESS STEEL EXPANSION JOINT, TYPE RFA-S
STAIESS STEEL EXPANSION JOINT, TYPE RFA-S A stainless steel expansion joint with carbon steel flanges for the use in thermal oil pipe systems. For applications where a thermal expansion of the piping has
More informationDSX-Series Vibration
THE DRIVING FORCE IN ELECTRODYNAMIC VIBRATION TESTING Vibration Experience That Counts A global vibration manufacturer for more than 35 years, Thermotron specializes in highperformance vibration test system
More informationExtruded Positioning Stage
Sold by Servo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ 07866 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com Extruded Positioning Stage The Extruded
More informationPPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
More informationTNS. Stem Thermometers according to DIN EN nitrogen filled option: contacts. Environmentally-friendly measuring system with non-toxic nitrogen
Stem Thermometers accoring to DIN EN 13190 nitrogen fille option: contacts measuring monitoring analysing TNS Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
More informationINDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load
More informationMKV AC capacitors. General AC applications. Ordering code: B25832 Date: September 2005
MKV C capacitors General C applications Orering coe: Date: September 2005 EPCOS G 2005. Reprouction, publication an issemination of this ata sheet, enclosures hereto an the information containe therein
More informationPerformance: PE Series
Performance: PE Series GAM can. If you don t see exactly what you need, let us know. We can modify the PE Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications
More information