CARPENTER ARPENTER & PATER

Transcription

1 Catalog CF2009 CARPENTER & PATERSON, INC.

2 CARPENTER & PATERSON, INC. CONSTRUCTION FASTENERS TERMS and CONDITIONS of SALE Effective PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated. 2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller s acceptance of an order, but seller assumes no responsibility or liability, and will accept no backcharge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay. 3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller s responsibility ceases and the title passes on delivery to the carrier. 4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded). 5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-toorder products (either published or unpublished) are non-cancelable / non-returnable. 6. PRODUCT APPLICATION: Seller s products are intended for installation and service as illustrated or described in seller s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication. Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller. In accordance with our product development program, we reserve the right to revise the design and application of our products without notification. For latest product information, please contact the nearest Carpenter & Paterson office. 7. WARRANTY: Carpenter & Paterson, Inc. warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product. Where engineering design or fabrication work is supplied, Buyer s acceptance of Seller s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson s product warranty. The foregoing constitutes the Purchaser s sole and exclusive remedy under Carpenter & Paterson warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MERCHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTIOUS ACT OR OMISSION. The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification. 8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities. 9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $ will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors. 10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees.

3 Table of Contents PAGE SECTION I NUTS FINISHED / HEAVY / 2H / LOCK / INSERT 4 SECTION II WASHERS FLAT / SPLIT / FENDER / PLATE / BEVEL 6 SECTION III ROD COUPLINGS REDUCING / REGULAR / SIGHT HOLE 8 SECTION IV BOLTS GRADE A / A325 / TAP / B7 10 SECTION V SCREWS LAG / SELF TAPPING / DRIVE / DRYWALL 20 SECTION VI RODS LAG / ALL THREAD / STUDS / MACHINE / EYE 25 SECTION VII U BOLTS STANDARD / LIGHT DUTY / DUCTILE IRON 34 SECTION VIII WALL ANCHORS WING / TOGGLE / DRYWALL ANCHORS 36 SECTION IX CAST IN ANCHORS BANG IT / WOOD KNOCKERS / ANCHOR BOLT 40 SECTION X CONCRETE ANCHORS HAMMER IN / TOOLS / BITS / DROP IN / EXPANSION / SLEEVE / WEDGE / TAPCON 43 SECTION XI CRACKED CONCRETE TRUBOLT+ / SNAKE+ / VERTIGO+ / POWER STUD+ / WEDGE BOLT+ / PE0+ / AC+ / G5 63 SECTION XII ADHESIVE POWER FAST+ / POWERSTICK / EPCON A7 & C6 / HIT HY 50, HY20 & ICE 68 SECTION XIII ROD HANGERS WOOD, STEEL & CONCRETE ROD HANGERS / SAMMY / VERTIGO 70 SECTION XIV SAW BLADES RECIPROCATING / BAND SAW / HOLE SAW 77

4 Nuts FINISHED HEX NUTS, GRADE A, NC Figure 165 Tap WGT Box Case Size PCS Quantity Quantity 1/4" /16" /8" /16" /2" /8" /4" /8" " /8" 39.8 Bulk Bulk Available Finishes 1-1/4" 51.7 Bulk Bulk Plain, Electro Zinc, Hot Dipped Galvanized 1-3/8" 73.0 Bulk Bulk Stainless 304 & Stainless /2" 88.1 Bulk Bulk HEAVY HEX NUTS, GRADE A, NC Figure 165H Tap Size WGT PCS Box Quantity Case Quantity 1/4" /16" /8" /16" /2" /8" /4" /8" " /8" Bulk Bulk 1-1/4" Bulk Bulk 1-3/8" Bulk Bulk 1-1/2" Bulk Bulk 1-3/4" Bulk Bulk 2" Bulk Bulk 2-1/4" Bulk Bulk Available Finishes 2-1/2" Bulk Bulk Plain, Electro Zinc, Hot Dipped Galvanized 2-3/4" Bulk Bulk Stainless 304 & Stainless 316 3" Bulk Bulk Page 4 Section I

5 Nuts Available Finishes Plain, Electro Zinc & Hot Dipped Galvanized HEAVY HEX NUTS, ASTM A194, GRADE 2H Figure 1652H Tap WGT Box Size PCS Quantity 3/8" /2" /8" /4" /8" " /8" 59.2 Bulk 1-1/4" 78.6 Bulk 1-3/8" Bulk 1-1/2" Bulk 1-3/4" Bulk 2" Bulk NYLON INSERT LOCKNUTS, GRADE A, NC Figure 165NYL Tap WGT Box Size PCS Quantity 1/4" /8" /2" /8" /4" Available Finishes 7/8" Electro Zinc, Stainless 304 & Stainless 316 1" CONCRETE INSERT NUTS Figure 650N Tap WGT Box Size PCS Quantity 3/8" /2" /8" Available Finishes 3/4" 22.0 Plain & Electro Zinc 7/8" 24.0 Section I Page 5

6 Washers FLAT WASHERS USS Figure 103 Rod WGT Box Case Size PCS Quantity Quantity 1/4" /16" /8" /16" /2" /8" /4" /8" " /8" 22.2 Bulk Bulk Available Finishes 1-1/4" 26.0 Bulk Bulk Plain, Electro Zinc, Hot Dipped Galvanized 1-3/8" 32.0 Bulk Bulk Stainless 304 & Stainless /2" 38.5 Bulk Bulk SPLIT LOCK WASHER Figure 176 Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316 Rod WGT Box Case Size PCS Quantity Quantity 1/4" /16" /8" /16" /2" /8" /4" /8" " FENDER WASHER Figure 8 Rod WGT Box Case Size PCS Quantity Quantity 1/4" Available Finishes 5/16" Plain, Electro Zinc, Hot Dipped Galvanized 3/8" Stainless 304 & Stainless 316 1/2" Page 6 Section II

7 Washers LIGHT DUTY WASHER PLATE Figure 102 Rod Hole Steel WGT Size Size Size PCS 3/8" 7/16" 1/8 X 2 X /2" 9/16" 1/8 X 3 X /8" 11/16" 1/8 X 4 X /4" 13/16" 1/8 X 5 X /8" 15/16" 1/8 X 6 X " 1 1/16" 3/16 X 2 X /16 X 3 X /16 X 4 X /16 X 5 X /16 X 6 X /4 X 2 X /4 X 2 1/2 X 2 1/ /4 X 3 X /4 X 4 X /4 X 5 X /4 X 6 X 6 3/8 X 2 X 2 3/8 X 2 1/2 X 2 1/ /8 X 3 X /8 X 4 X Available Finishes 3/8 X 5 X Plain, Painted, Hot Dipped Galvanized 3/8 X 6 X BEVEL WASHER Figure 706 Rod WGT Box Size 3/8" PCS 7.4 Quantity 600 1/2" /8" /4" Available Finishes 7/8" 32.5 Plain, Electro Zinc & Hot Dipped Galvanized 1" 29.4 Section II Page 7

8 WASHER PLATE Figure 260 Available Finishes Plain, Painted, Hot Dipped Galvanized Washers Rod Steel WGT Size Size PCS 3/8" 1/4 X 3 X /2" 1/4 X 3 X /8" 3/8 X 3 X /4" 3/8 X 4 X /8" 1/2 X 4 X " 1/2 X 4 X /4" 1/2 X 5 X /2" 5/8 X 5 X /4" 5/8 X 5 X " 3/4 X 6 X /4" 3/4 X 6 X /2" 3/4 X 6 X /4" 3/4 X 6 X " 3/4 X 6 X REDUCING ROD COUPLING Figure 123R Rod Rod Couplings WGT Box Case PCS Quantity Quantity Size 1/4" X 3/8" 3/8" X 1/2" 1/2" X 5/8" /8" X 3/4" /4" X 7/8" Bulk 7/8" X 1" Bulk Available Finishes 1" X 1 1/8" Bulk Plain & Electro Zinc 1 1/8" X 1 1/4" 98.0 Bulk Bulk Page 8 Section III

9 Rod Couplings ROD COUPLING Figure 123 Tap WGT Box Case Size PCS Quantity Quantity 1/4" /16" /8" /2" /8" /4" /8" " /8" 72.0 Bulk 75 Available Finishes 1-1/4" 87.6 Bulk 50 Plain, Electro Zinc, Hot Dipped Galvanized 1-3/8".0 Bulk 30 Stainless 304 & Stainless /2" Bulk 20 ROD COUPLING WITH SIGHT HOLE Figure 123W Tap WGT Box Case Size PCS Quantity Quantity 1/4" /16" /8" /2" /8" /4" /8" " /8" 72.0 Bulk 75 Available Finishes 1-1/4" 87.6 Bulk 50 Plain, Electro Zinc, Hot Dipped Galvanized 1-3/8".0 Bulk 30 Stainless 304 & Stainless /2" Bulk 20 Section III Page 9

10 Bolts HEX BOLTS, GRADE A Figure BLT Bolt WGT Case Size PCS Quantity 1/4 X 1/2" /4 X 3/4" /4 X 1" /4 X 1 1/4" /4 X 1 1/2" /4 X 1 3/4" /4 X 2" /4 X 2 1/4' /4 X 2 1/2" /4 X 2 3/4" /4 X 3" /4 X 3 1/4" /4 X 3 1/2" /4 X 4" /4 X 4 1/2" /4 X 5" /4 X 5 1/2" /4 X 6" /4 X 6 1/2" /4 X 7" /4 X 7 1/2" /4 X 8" /16 X 1/2" /16 X 3/4" /16 X 1" /16 X 1 1/4" /16 X 1 1/2" /16 X 1 3/4" /16 X 2" /16 X 2 1/4" /16 X 2 1/2" /16 X 2 3/4" /16 X 3" *Available in different 5/16 X 3 1/4" diameters and lengths 5/16 X 3 1/2" /16 X 3 3/4" Available Finishes 5/16 X 4" Plain, Electro Zinc, Hot Dipped Galvanized 5/16 X 4 1/2" Stainless 304 & Stainless 316 5/16 X 5" Page 10 Section IV

11 Bolts HEX BOLTS, GRADE A Bolt WGT Case Bolt WGT Case Size PCS Quantity Size PCS Quantity 5/16 X 5 1/2" /16 X 6" /16 X 6" /16 X 7" /16 X 6 1/2" /16 X 8" /16 X 7" /2 X 3/4" /16 X 7 1/2" /2 X 1" /16 X 8" /2 X 1 1/4" /8 X 1/2" /2 X 1 1/2" /8 X 3/4" /2 X 1 3/4" /8 X 1" /2 X 2" /8 X 1 1/4" /2 X 2 1/4" /8 X 1 1/2" /2 X 2 1/2" /8 X 1 3/4" /2 X 2 3/4" /8 X 2" /2 X 3" /8 X 2 1/4" 3/8 X 2 1/2" /2 X 3 1/4" 1/2 X 3 1/2" /8 X 2 3/4" /2 X 3 3/4" /8 X 3" /2 X 4" /8 X 3 1/4" /2 X 4 1/2" /8 X 3 1/2" /2 X 5" /8 X 3 3/4" /2 X 5 1/ /8 X 4" /2 X 6" /8 X 4 1/2" /2 X 6 1/2" /8 X 5" /2 X 7" /8 X 5 1/2" /2 X 7 1/ /8 X 6" /2 X 8" /8 X 6 1/2" /2 X 8 1/2" /8 X 7" /2 X 9" /8 X 7 1/2" /2 X 9 1/2" /8 X 8" /8 X 1" /16 X 1" /8 X 1 1/4" /16 X 1 1/4" /8 X 1 1/2" /16 X 1 1/2" /8 X 1 3/4" /16 X 2" /8 X 2" /16 X 2 1/2" /8 X 2 1/4" /16 X 3" /8 X 2 1/2" /16 X 3 1/2" /8 X 2 3/4" /16 X 4" /8 X 3" /16 X 4 1/2" /8 X 3 1/4" /16 X 5" /8 X 3 1/2" Section IV Page 11

12 Bolts HEX BOLTS, GRADE A Bolt Size 5/8 X 3 3/4" 5/8 X 4" 5/8 X 4 1/2" 5/8 X 5" 5/8 X 5 1/2" 5/8 X 6" 5/8 X 6 1/2" 5/8 X 7" 5/8 X 7 1/2" 5/8 X 8" 5/8 X 8 1/2" 5/8 X 9" 5/8 X 9 1/2" 5/8 X 10" 5/8 X 10 1/2" 5/8 X 11" 5/8 X 11 1/2" 5/8 X 12" 3/4 X 1" 3/4 X 1 1/4" 3/4 X 1 1/2" 3/4 X 1 3/4" 3/4 X 2" 3/4 X 2 1/4" 3/4 X 2 1/2" 3/4 X 2 3/4" 3/4 X 3" 3/4 X 3 1/4" 3/4 X 3 1/2" 3/4 X 3 3/4" 3/4 X 4" 3/4 X 4 1/2" 3/4 X 5" 3/4 X 5 1/2" 3/4 X 6" 3/4 X 6 1/2" WGT Case Bolt WGT PCS Quantity Case Size PCS Quantity 3/4 X 8 1/2" /4 X 9" /4 X 9 1/2" /4 X 10" /4 X 10 1/2" /4 X 11" /4 X 11 1/2" /4 X 12" /8 X 1 1/2" /8 X 1 3/4" /8 X 2" /8 X 2 1/4" /8 X 2 1/2" /8 X 2 3/4" /8 X 3" /8 X 3 1/ 1/4" /8 X 3 1/2" /8 X 3 3/4" /8 X 4" /8 X 4 1/2" /8 X 5" /8 X 5 1/2" /8 X 6" /8 X 6 1/2" /8 X 7" /8 X 7 1/2" /8 X 8" /8 X 8 1/2" /8 X 9" /8 X 9 1/2" /8 X 10" /8 X 10 1/2" /8 X 11" /8 X 12" X 2" X 2 1/4" /4 X 7" 1 X 2 1/2" /4 X 7 1/2" 1 X 2 3/4" /4 X 8" X 3" Page 12 Section IV

13 Bolts HEX BOLTS, GRADE A Bolt WGT Case Bolt WGT Case Size PCS Quantity Size PCS Quantity 1 X 3 1/4" /4 X 4 1/2" X 3 1/2" /4 X 5" X 3 3/4" /4 X 5 1/2" X 4" /4 X 6" X 4 1/2" /4 X 6 1/2" X 5" /4 X 7" X 5 1/2" /4 X 7 1/2" X 6" /4 X 8" X 6 1/2" /4 X 8 1/2" X 7" /4 X 9" X 7 1/2" /4 X 9 1/2" X 8" /4 X 10" X 8 1/2" /4 X 11" X 9" /4 X 12" X 9 1/2" /2 X 3" X 10" / 1/2 X 3 1/ 1/2" X 10 1/2" /2 X 4" X 11" /2 X 4 1/2" X 12" /2 X 5" /8 X 2 1/2" /2 X 5 1/2" /8 X 3" /2 X 6" /8 X 3 1/2" /2 X 6 1/2" /8 X 4" /2 X 7" /8 X 4 1/2" /2 X 7 1/2" /8 X 5" /2 X 8" /8 X 5 1/2" /2 X 9" /8 X 6" /2 X 10" /8 X 6 1/2" /2 X 11" /8 X 7" /2 X12" /8 X 8" /4 X 4 1/2" /8 X 9" /4 X 5" /8 X 9 1/2" /4 X 5 1/2" /8 X 10" /4 X 6" /8 X 11" /4 X 6 1/2" /8 X 12" /4 X 7" /4 X 2 1/2" /4 X 8" /4 X 3" X 6" /4 X 3 1/2" X 7" /4 X 4" X 8" Section IV Page 13

14 Bolts STRUCTURAL BOLTS, A325 Figure BLT A325 Bolt WGT Case Size PCS Quantity 1/2 X 1 1/4" /2 X 1 1/2" /2 X 1 3/4" /2 X 2" /2 X 2 1/4" /2 X 2 1/2" /2 X 2 3/4" /2 X 3" /2 X 3 1/2" /2 X 4" /8 X 1 1/2" /8 X 1 3/4" /8 X 2" /8 X 2 1/4" /8 X 2 1/2" /8 X 2 3/4" /8 X 3" /8 X 3 1/2" /8 X 4" /8 X 4 1/2" /8 X 5" /8 X 5 1/2" /8 X 6" /8 X 6 1/2" /8 X 7" /8 X 7 1/2" /8 X 8" /4 X 1 1/2" /4 X 1 3/4" /4 X 2" /4 X 2 1/4" /4 X 2 1/2" /4 X 2 3/4" /4 X 3" /4 X 3 1/4" /4 X 3 1/2" /4 X 3 3/4" Available Finishes 3/4 X 4" Plain & Hot Dipped Galvanized 3/4 X 4 1/2" Page 14 Section IV

15 Bolts STRUCTURAL BOLTS, A325 Bolt WGT Case Bolt WGT Case Size PCS Quantity Size PCS Quantity 3/4 X 5" X 4 1/2" /4 X 5 1/4" X 4 3/4" /4 X 5 1/2" X 5" /4 X 6" X 5 1/2" /4 X 6 1/2" X 6" /4 X 7" X 6 1/2" /4 X 7 1/2" X 7" /4 X 8" X 7 1/2" /4 X 9" X 8" /4 X 10" /8 X 2 1/2" /8 X 2" /8 X 2 3/4" /8 X 2 1/4" /8 X 3" /8 X 2 1/2" /8 X 3 1/2" /8 X 2 3/4" /8 X 4" /8 X 3" /8 X 4 1/4" /8 X 3 1/4" /8 X 4 1/2" /8 X 3 1/2" /8 X 4 3/4" /8 X 3 3/4" /8 X 5" /8 X 4" /8 X 5 1/2"" /8 X 4 1/2" /8 X 6" /8 X 5" /8 X 6 1/2" /8 X 5 1/2" /8 X 7" /8 X 6" /8" 7 1/2" /8 X 6 1/2" /8 X 8" /8 X 7" /4 X 3" /8 X 7 1/2" /4 X 3 1/4" /8 X 8" /4 X 3 1/2" /8 X 8 1/2" /4 X 3 3/4" /8 X 9 1/2" /4 X 4" X 2" /4 X 4 1/4" X 2 1/4" /4 X 4 1/2" X 2 1/2" /4 X 4 3/4" X 2 3/4" /4 X 5" X 3" /4 X 5 1/2" X 3 1/4" /4 X 6" X 3 1/2" /4 X 6 1/2" X 3 3/4" /4 X 7" X 4" /4 X 7 1/2" X 4 1/4" /4 X 8" Section IV Page 15

16 Bolts TAP BOLTS, GRADE A Figure TBLT Bolt WGT Case Size PCS Quantity 1/4 X 1/2" /4 X 3/4" /4 X 1" /4 X 1 1/4" /4 X 1 1/2" /4 X 1 3/4" /4 X 2" /4 X 2 1/4" /4 X 2 1/2" /4 X 2 3/4" /4 X 3" /4 X 3 1/2" /4 X 4" /4 X 4 1/2" /4 X 5" /4 X 5 1/2" /4 X 6" /16 X 1" /16 X 1 1/4" /16 X 1 1/2" /16 X 1 3/4" /16 X 2" /16 X 2 1/4" /16 X 2 1/2" /16 X 2 3/4" /16 X 3" /16 X 3 1/2" /16 X 4" /16 X 4 1/2" /16 X 5" /16 X 5 1/2" /16 X 6" /8 X 1" /8 X 1 1/4" /8 X 1 1/2" Available Finishes 3/8 X 1 3/4" Plain & Electro Zinc 3/8 X 2" Page 16 Section IV

17 Bolts TAP BOLTS, GRADE A Bolt WGT Case Bolt WGT Case Size PCS Quantity Size PCS Quantity 3/8 X 2 1/4" /8 X 3 1/2" /8 X 2 1/2" /8 X 4" /8 X 2 3/4" /8 X 4 1/2" /8 X 3" /8 X 5" /8 X 3 1/2" /8 X 5 1/2" /8 X 4" /8 X 6" /8 X 4 1/2" /8 X 7" /8 X 5" /8 X 8" /8 X 5 1/2" /8 X 9" /8 X 6" /4 X 2" /8 X 7" /4 X 2 1/2" /8 X 8" /4 X 3" /16 X 1" /4 X 3 1/4" /2 X 1" /4 X 3 1/2" /2 X 1 1/4" /4 X 4" /2 X 1 1/2" /4 X 4 1/2" /2 X 1 3/4" /4 X 5" /2 X 2" /4 X 5 1/2" /2 X 2 1/4" /4 X 6" /2 X 2 1/2" /4 X 7" /2 X 2 3/4" /4 X 8" /2 X 3" /4 X /2 X 3 1/2" /8 X 2 1/2" /2 X 4" /8 X 3" /2 X 4 1/2" /8 X 3 1/2" /2 X 5" /8 X 4" /2 X 5 1/2" /8 X 4 1/2" /2 X 6" /8 X 5" /2 X 6 1/2" /8 X 6" /2 X 7" X 2" /2 X 8" X 2 1/2" /8 X 1 1/2" X 3" /8 X 1 3/4" X 3 1/2" /8 X 2" X 4" /8 X 2 1/4" X 4 1/2" /8 X 2 1/2" X 5" /8 X 3" X 6" Section IV Page 17

18 Bolts BOLTS, A193 GRADE B7 Figure BLT B7 Bolt WGT Case Size PCS Quantity 1/2 X 1" /2 X 1 1/4" /2 X 1 1/2" /2 X 1 3/4" /2 X 2 1/4" /2 X 2 1/2" /2 X 2 3/4" /2 X 3" /2 X 3 1/4" /2 X 3 1/2" /2 X 3 3/4" /2 X 4" /2 X 4 1/2" /2 X 4 3/4" /2 X 5" /2 X 5 1/4" /2 X 5 1/2" /2 X 6" /8 X 1 1/4" /8 X 1 1/2" /8 X 1 3/4" /8 X 2" /8 X 2 1/4" /8 X 2 1/2" /8 X 2 3/4" /8 X 3" /8 X 3 1/4" /8 X 3 1/2" /8 X 3 3/4" /8 X 4" /8 X 4 1/4" /8 X 4 1/2" /8 X 4 3/4" /8 X 5" /8 X 5 1/2" Available Finishes 5/8 X 6" Plain 5/8 X 6 1/2" Page 18 Section IV

19 Bolts BOLTS, A193 GRADE B7 Bolt Size 3/4 X 1 1/2" 3/4 X 1 3/4" 3/4 X 2" 3/4 X 2 1/4" 3/4 X 2 1/2" 3/4 X 2 3/4" 3/4 X 3" 3/4 X 3 1/4" 3/4 X 3 1/2" 3/4 X 3 3/4" 3/4 X 4" 3/4 X 4 1/2" 3/4 X 5" 3/4 X 5 1/2" 3/4 X 6" 7/8 X 2" 7/8 X 2 1/4" 7/8 X 2 1/2" 7/8 X 2 3/4" 7/8 X 3" 7/8 X 3 1/4" 7/8 X 3 1/2" 7/8 X 3 3/4" 7/8 X 4" 7/8 X 4 1/2" 7/8 X 5" 7/8 X 5 1/2" 7/8 X 6" 1 X 2" 1 X 2 1/4" 1 X 2 1/2" 1 X 2 3/4" 1 X 3" 1 X 3 1/4" 1 X 3 1/2" 1 X 3 3/4" 1 X 4" 1 X 4 1/2" 1 X 5" WGT Case Bolt WGT Case PCS Quantity Size PCS Quantity 1 X 5 1/2" X 6" X 6 1/2" X 7" X 8" /8 X 2 3/4" /8 X 3" /8 X 3 1/4" /8 X 3 1/2" /8 X 3 3/4" /8 X 4" /8 X 4 1/2" /8 X 5" /8 X 5 1/2" /8 X 6" /8 X 6 1/2" /8 X 7" /8 X 7 1/2" /4 X 3" /4 X 3 1/2" /4 X 4" /4 X 4 1/2" /4 X 5" /4 X 5 1/2" /4 X 6" /4 X 6 1/2" /4 X 7" /2 X 3" /2 X 3 1/4" /2 X 3 1/2" 1 1/2 X 3 3/4" /2 X 4" /2 X 4 1/2" /2 X 5" /2 X 5 1/2" /2 X 6" /2 X 6 1/2" /2 X 7" /2 X 8" Section IV Page 19

20 Screws Lag "Coach" Screws Figure 107 Screw WGT Case Size PCS Quantity 1/4 X 1" /4 X 1 1/4" /4 X 1 1/2" 1/4 X 1 3/4" /4 X 2" /4 X 2 1/2" /4 X 3" /4 X 3 1/2" /4 X 4" /4 X 4 1/2" /4 X 5" /4 X 5 1/2" /4 X 6" /16 X 1" /16 X 1 1/4" /16 X 1 1/2" /16 X 1 3/4" 5/16 X 2" /16 X 2 1/2" /16 X 3" /16 X 3 1/2" /16 X 4" /16 X 4 1/2" /16 X 5" 5/16 X 5 1/2" /16 X 6" /8 X 1" /8 X 1 1/4" /8 X 1 1/2" /8 X 1 3/4" 3/8 X 2" /8 X 2 1/2" Available Finishes 3/8 X 3" Plain, Electro Zinc & Hot Dipped Galvanized 3/8 X 3 1/2" Page 20 Section V

21 Screws Lag "Coach" Screws Screw Size WGT PCS Case Quantity Screw Size WGT PCS Case Quantity 3/8 X 4" /8 X 4" /8 X 4 1/2" /8 X 4 1/2" /8 X 5" /8 X 5" /8 X 5 1/2" /8 X 5 1/2" /8 X 6" /8 X 6" /8 X 7" /8 X 7" /8 X 8" /8 X 8" /8 X 9" /8 X 9" /8 X 10" /8 X 10" /8 X 12" /8 X 11" /8 X 14" /8 X 12" /2 X 1 1/2" /8 X 14" /2 X 2" /8 X 16" /2 X 2 1/2" /8 X 18" /2 X 3" /8 X 20" /2 X 3 1/2" /8 X 24" /2 X 4" /4 X 2 1/2" /2 X 4 1/2" /4 X 3" /2 X 5" /4 X 3 1/2" /2 X 5 1/2" /4 X 4" /2 X 6" /4 X 4 1/2" /2 X 7" /4 X 5" /2 X 8" /4 X 5 1/2" /2 X 9" /4 X 6" /2 X 10" /4 X 7" /2 X 11" 1/2 X 12" 1/2 X 14" 1/2 X 16" 1/2 X 18" 1/2 X 24" 5/8 X 2" 5/8 X 2 1/2" 5/8 X 3" 5/8 X 3 1/2" /4 X 7 1/2" /4 X 8" /4 X 9" /4 X 10" /4 X 11" /4 X 12" /4 X 14" /4 X 16" /4 X 18" /4 X 20" Section V Page 21

22 Screws SELF DRILLING SCREWS, HEX HEAD WASHER Figure SDTS Screw WGT Box Case Size PCS Quantity Quantity #6 X 3/8" #6 X 1/2" #6 X 3/4" #8 X 1/2" #8 X 5/8" #8 X 3/4" #8 X 1" #8 X 1 1/4" #8 X 1 1/2" #10 X 1/2" #10 X 5/8" #10 X 3/4" #10 X 1" #10 X 1 1/4" #10 X 1 1/2" #10 X 2" #12 X 3/4" #12 X 1" #12 X 1 1/4" #12 X 1 1/2" #12 X 2" #14 X 3/4" #14 X 1" *Available in different #14 X 1 1/4" diameters and lengths #14 X 1 1/2" #14 X 1 3/4" Available Finishes #14 X 2" Electro Zinc #14 X 3" Page 22 Section V

23 Screws *Available in different diameters and lengths Available Finishes Electro Zinc SELF DRILLING SCREWS, HEX HEAD WITH NEOPRENE WASHER Figure SDTSN Screw Size #10 X 5/8" #10 X 3/4" #10 X 1" #10 X 1 1/2" WGT PCS Box Quantity Case Quantity #10 X 2" #12 X 3/4" #12 X 1" #12 X 1 1/4" #12 X 1 1/2" #14 X 3/4" #14 X 1" #14 X 1 1/4" #14 X 1 1/2" STEEL DRIVE SCREW Figure 166 Screw Size #12 X 1 1/2" #16 X 2" WGT Box PCS Quantity Section V Page 23

24 Screws DRYWALL SCREWS, PHILLIPS, COARSE Figure DWS Screw WGT Box Case Size PCS Quantity Quantity #6 X 1" #6 X 1 1/8" #6 X 1 1/4" #6 X 1 5/8" #6 X 2" #6 X 2 1/4" #7 X 2" #8 X 2 1/2" Available Finishes #8 X 3" Black Phosphate #10 X 3 1/2" #10 X 4" DRYWALL SCREWS, PHILLIPS, FINE Figure DWSF Screw WGT Box Case Size PCS Quantity Quantity #6 X 1" #6 X 1 1/8" #6 X 1 1/4" #6 X 1 5/8" #6 X 2" #6 X 2 1/4" Available Finishes #8 X 2 1/2" Black Phosphate #8 X 3" Page 24 Section V

25 Rods *Available in different diameters and lengths LAG ROD Figure 28 Rod WGT Box Size PCS Quantity 1/4 X 1-1/2" /4 X 2" /4 X 2-1/2" /4 X 3" 1/4 X 3-1/2" /4 X 4" /4 X 5" /4 X 6" /16 X 1-1/2" /16 X 2" /16 X 2-1/2" 5/16 X 3" /16 X 3-1/2" /16 X 4" /16 X 5" /16 X 6" /8 X 2" /8 X 2-1/2" /8 X 3" /8 X 3-1/2" 3/8 X 4" 3/8 X 4-1/2" 3/8 X 5" 3/8 X 5-1/2" 3/8 X 6" /8 X 8" /8 X 10" /8 X 12" /8 X 14" /2 X 6" 1/2 X 7" /2 X 8" 34.8 Available Finishes 1/2 X 10" 42.9 Plain, Electro Zinc, & Painted 1/2 X 12" 52.1 Section VI Page 25

26 ALL THREAD ROD 6', 10' & 12' Figure 94 Rod Size 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1 1/8" 1 1/4" 1 3/8" Available Finishes 1 1/2" Plain, Electro Zinc, Hot Dipped Galvanized 1 3/4" Stainless 304 & Stainless 316 2" Rods WGT 6' Tube FT Quantity B7 THREAD ROD Figure 94 B7 Rod Size 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1 1/8" Available Finishes 1 1/4" Plain 1 1/2" WGT 6' Tube FT Quantity Page 26 Section VI

27 Rods ALL THREAD STUDS Figure 94S Figure 94S B7 Pipe Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" Standard Stud Standard Stud 150 LB Flange 300 LB Flange 1/2 X 2 1/4" 1/2 X 2 1/2" 1/2 X 2 1/4" 5/8 X 2 3/4" 1/2 X 2 1/2" 5/8 X 3" 1/2 X 2 1/2" 5/8 X 3" 1/2 X 2 3/4" 3/4 X 3 1/2" 5/8 X 3" 5/8 X 3 1/4" 5/8 X 3 1/4" 3/4 X 3 3/4" 5/8 X 3 1/2" 3/4 X 4" 3 1/2" 5/8 X 3 1/2" 3/4 X 4 1/4" 4" 5/8 X 3 1/2" 3/4 X 4 1/4" 5" 6" 8" 10" 12" 3/4 X 3 3/4" 3/4 X 3 3/4" 3/4 X 4" 7/8 X 4 1/2" 7/8 X 4 1/2" 3/4 X 4 1/2" 3/4 X 4 3/4" 7/8 X 5 1/4" 1 X 6" 1 1/8 X 6 1/2" 14" 1 X 5" 1 1/8 X 6 3/4" 16" 1 X 5 1/4" 1 1/4 X 7 1/4" 18" 1 1/8 X 5 3/4" 1 1/4 X 7 1/2" 20" 1 1/8 X 6" 1 1/4 X 8" 22" 1 1/4 X 6 1/2" 1 1/2 X 8 3/4" 24" 1 1/4 X 6 3/4" 1 1/2 X 9" 26" 1 1/4 X 7" 1 5/8 X 10" 30" 1 1/4 X 7 1/4" 1 3/4 X 11 3/4" Available Finishes 34" 1 1/2 X 8" 1 7/8 X 12 1/4" Plain, Electro Zinc, Hot Dipped Galvanized 36" 1 1/2 X 8 1/4" 2 X 12 3/4 Stainless 304 & Stainless " 1 1/2 X 8 1/2" 2 X 13 64" COPPER STUDS Figure 94S CT Rod WGT Box Available Finishes Size PCS Quantity Copper Plated 3/8 X 3" Section VI Page 27

28 Rods MACHINE THREADED RODS Figure 133 Rod THREAD WGT Size LENGTH PCS 3/8 X 8" 3" 25 3/8 X 10" 3" 32 3/8 X 12" 3" 38 3/8 X 14" 3" 44 3/8 X 18" 3" 57 3/8 X 24" 3" 76 3/8 X 30" 3" 94 3/8 X 36" 3" 120 3/8 X 42" 3" 140 3/8 X 48" 3" 150 3/8 X 54" 3" 170 3/8 X 60" 3" 190 3/8 X 66" 3" 210 3/8 X 72" 3" 230 1/2 X 8" 3" 44 1/2 X 10" 3" 56 1/2 X 12" 3" 67 1/2 X 14" 3" 78 1/2 X 18" 3" 1/2 X 24" 3" 140 1/2 X 30" 3" 170 1/2 X 36" 3" 200 1/2 X 42" 3" 240 *Available in different 1/2 X 48" 3" 250 diameters and lengths 1/2 X 54" 3" 310 1/2 X 60" 3" 340 Available Finishes 1/2 X 66" 3" 370 Plain, Electro Zinc, Hot Dipped Galvanized & Painted 1/2X 72" 3" 410 Page 28 Section VI

29 Rods MACHINE THREADED RODS Rod THREAD WGT Rod THREAD WGT Size LENGTH PCS Size LENGTH PCS 5/8 X 8" 3" 69 7/8 X 8" 4" 69 5/8 X 10" 3" 87 7/8 X 10" 4" 87 5/8 X 12" 3" 110 7/8 X 12" 4" 110 5/8 X 14" 3" 130 7/8 X 14" 4" 130 5/8 X 18" 3" 160 7/8 X 18" 4" 160 5/8 X 24" 3" 210 7/8 X 24" 4" 210 5/8 X 30" 3" 160 7/8 X 30" 4" 160 5/8 X 36" 3" 320 7/8 X 36" 4" 320 5/8 X 42" 3" 370 7/8 X 42" 4" 370 5/8 X 48" 3" 420 7/8 X 48" 4" 420 5/8 X 54" 3" 470 7/8 X 54" 4" 470 5/8 X 60" 3" 520 7/8 X 60" 4" 520 5/8 X 66" 3" 580 7/8 X 66" 4" 580 5/8 X 72" 3" 630 7/8 X 72" 4" 630 3/4 X 8" 3" 69 1 X 8" 4" 69 3/4 X 10" 3" 87 1 X 10" 4" 87 3/4 X 12" 3" X 12" 4" 110 3/4 X 14" 3" X 14" 4" 130 3/4 X 18" 3" X 18" 4" 160 3/4 X 24" 3" X 24" 4" 210 3/4 X 30" 3" X 30" 4" 160 3/4 X 36" 3" X 36" 4" 320 3/4 X 42" 3" X 42" 4" 370 3/4 X 48" 3" X 48" 4" 420 3/4 X 54" 3" X 54" 4" 470 3/4 X 60" 3" X 60" 4" 520 3/4 X 66" 3" X 66" 4" 580 3/4 X 72" 3" X 72" 4" 630 Section VI Page 29

30 Rods EYE RODS (UNWELDED) Figure 33 Rod THREAD WGT Size LENGTH PCS 3/8 X 8" 2 1/2" 32 3/8 X 10" 2 1/2" 38 3/8 X 12" 2 1/2" 45 3/8 X 14" 2 1/2" 51 3/8 X 18" 2 1/2" 64 3/8 X 24" 2 1/2" 82 3/8 X 30" 2 1/2" 110 3/8 X 36" 2 1/2" 120 3/8 X 42" 2 1/2" 140 3/8 X 48" 2 1/2" 180 3/8 X 54" 2 1/2" 180 3/8 X 60" 2 1/2" 200 3/8 X 66" 2 1/2" 220 3/8 X 72" 2 1/2" 240 1/2 X 8" 2 1/2" 60 1/2 X 10" 2 1/2" 71 1/2 X 12" 2 1/2" 82 1/2 X 14" 2 1/2" 94 1/2 X 18" 2 1/2" 120 1/2 X 24" 2 1/2" 150 1/2 X 30" 2 1/2" 190 1/2 X 36" 2 1/2" 220 1/2 X 42" 2 1/2" 250 *Available in different 1/2 X 48" 2 1/2" 190 diameters and lengths 1/2 X 54" 2 1/2" 320 1/2 X 60" 2 1/2" 350 Available Finishes 1/2 X 66" 2 1/2" 390 Plain, Electro Zinc, Hot Dipped Galvanized & Painted 1/2X 72" 2 1/2" 410 Page 30 Section VI

31 Rods EYE RODS (UNWELDED) Rod THREAD WGT Rod THREAD WGT Size LENGTH PCS Size LENGTH PCS 5/8 X 8" 2 1/2" 98 7/8 X 8" 3 1/2" 210 5/8 X 10" 2 1/2" 120 7/8 X 10" 3 1/2" 240 5/8 X 12" 2 1/2" 140 7/8 X 12" 3 1/2" 280 5/8 X 14" 2 1/2" 150 7/8 X 14" 3 1/2" 310 5/8 X 18" 2 1/2" 190 7/8 X 18" 3 1/2" 380 5/8 X 24" 2 1/2" 240 7/8 X 24" 3 1/2" 480 5/8 X 30" 2 1/2" 290 7/8 X 30" 3 1/2" 580 5/8 X 36" 2 1/2" 340 7/8 X 36" 3 1/2" 680 5/8 X 42" 2 1/2" 400 7/8 X 42" 3 1/2" 790 5/8 X 48" 2 1/2" 450 7/8 X 48" 3 1/2" 890 5/8 X 54" 2 1/2" 500 7/8 X 54" 3 1/2" 990 5/8 X 60" 2 1/2" 550 7/8 X 60" 3 1/2" 1 5/8 X 66" 2 1/2" 600 7/8 X 66" 3 1/2" /8 X 72" 2 1/2" 660 7/8 X 72" 3 1/2" /4 X 8" 3" X 8" 4" 300 3/4 X 10" 3" X 10" 4" 350 3/4 X 12" 3" X 12" 4" 390 3/4 X 14" 3" X 14" 4" 440 3/4 X 18" 3" X 18" 4" 530 3/4 X 24" 3" X 24" 4" 680 3/4 X 30" 3" X 30" 4" 820 3/4 X 36" 3" X 36" 4" 930 3/4 X 42" 3" X 42" 4" 1 3/4 X 48" 3" X 48" 4" /4 X 54" 3" X 54" 4" /4 X 60" 3" X 60" 4" /4 X 66" 3" X 66" 4" /4 X 72" 3" X 72" 4" 1800 Section VI Page 31

32 Rods WELDED EYE RODS Figure 93 Rod THREAD WGT Size LENGTH PCS 3/8 X 8" 2 1/2" 32 3/8 X 10" 2 1/2" 38 3/8 X 12" 2 1/2" 45 3/8 X 14" 2 1/2" 51 3/8 X 18" 2 1/2" 64 3/8 X 24" 2 1/2" 82 3/8 X 30" 2 1/2" 110 3/8 X 36" 2 1/2" 120 3/8 X 42" 2 1/2" 140 3/8 X 48" 2 1/2" 180 3/8 X 54" 2 1/2" 180 3/8 X 60" 2 1/2" 200 3/8 X 66" 2 1/2" 220 3/8 X 72" 2 1/2" 240 1/2 X 8" 2 1/2" 60 1/2 X 10" 2 1/2" 71 1/2 X 12" 2 1/2" 82 1/2 X 14" 2 1/2" 94 1/2 X 18" 2 1/2" 120 1/2 X 24" 2 1/2" 150 1/2 X 30" 2 1/2" 190 1/2 X 36" 2 1/2" 220 1/2 X 42" 2 1/2" 250 *Available in different 1/2 X 48" 2 1/2" 190 diameters and lengths 1/2 X 54" 2 1/2" 320 1/2 X 60" 2 1/2" 350 Available Finishes 1/2 X 66" 2 1/2" 390 Plain, Electro Zinc, Hot Dipped Galvanized & Painted 1/2X 72" 2 1/2" 410 Page 32 Section VI

33 Rods WELDED EYE RODS Rod THREAD WGT Rod THREAD WGT Size LENGTH PCS Size LENGTH PCS 5/8 X 8" 2 1/2" 98 7/8 X 8" 3 1/2" 210 5/8 X 10" 2 1/2" 120 7/8 X 10" 3 1/2" 240 5/8 X 12" 2 1/2" 140 7/8 X 12" 3 1/2" 280 5/8 X 14" 2 1/2" 150 7/8 X 14" 3 1/2" 310 5/8 X 18" 2 1/2" 190 7/8 X 18" 3 1/2" 380 5/8 X 24" 2 1/2" 240 7/8 X 24" 3 1/2" 480 5/8 X 30" 2 1/2" 290 7/8 X 30" 3 1/2" 580 5/8 X 36" 2 1/2" 340 7/8 X 36" 3 1/2" 680 5/8 X 42" 2 1/2" 400 7/8 X 42" 3 1/2" 790 5/8 X 48" 2 1/2" 450 7/8 X 48" 3 1/2" 890 5/8 X 54" 2 1/2" 500 7/8 X 54" 3 1/2" 990 5/8 X 60" 2 1/2" 550 7/8 X 60" 3 1/2" 1 5/8 X 66" 2 1/2" 600 7/8 X 66" 3 1/2" /8 X 72" 2 1/2" 660 7/8 X 72" 3 1/2" /4 X 8" 3" X 8" 4" 300 3/4 X 10" 3" X 10" 4" 350 3/4 X 12" 3" X 12" 4" 390 3/4 X 14" 3" X 14" 4" 440 3/4 X 18" 3" X 18" 4" 530 3/4 X 24" 3" X 24" 4" 680 3/4 X 30" 3" X 30" 4" 820 3/4 X 36" 3" X 36" 4" 930 3/4 X 42" 3" X 42" 4" 1 3/4 X 48" 3" X 48" 4" /4 X 54" 3" X 54" 4" /4 X 60" 3" X 60" 4" /4 X 66" 3" X 66" 4" /4 X 72" 3" X 72" 4" 1800 Section IV Page 33

34 U-Bolts U-BOLTS Figure 283 Pipe Rod WGT Box Size Diameter PCS Quantity 1/2" 1/4" 11 3/4" 1/4" 12 1" 1/4" /4" 3/8" /2" 3/8" 30 2" 3/8" /2" 1/2" " 1/2" /2" 1/2" " 1/2" " 1/2" " 5/8" " 5/8" " 3/4" " 7/8" 770 Bulk 14" 7/8" 830 Bulk 16" 7/8" 920 Bulk 18" 1" 1350 Bulk 20" 1" 1460 Bulk Available Finishes 24" 1" 1690 Bulk Plain, Electro Zinc, Hot Dipped Galvanized 30" 1" 1910 Bulk PVC, Stainless 304 & Stainless " 1" 2320 Bulk Page 34 Section VII

35 LIGHT DUTY U-BOLTS Figure 283LD Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized PVC, Stainless 304 & Stainless 316 Pipe Size Rod Diameter WGT PCS U-Bolts Box Quantity 1/2" 1/4" 6 3/4" 1/4" 7 1" 1/4" 7 1-1/4" 1/4" 8 1-1/2" 1/4" 9 2" 1/4" /2" 3/8" " 3/8" /2" 3/8" " 3/8" " 3/8" " 1/2" " 1/2" " 5/8" U-BOLTS FOR DUCTILE IRON PIPE Figure 283DI Available Finishes Plain, Electro Zinc, Hot Dipped Galvanized Pipe Rod WGT Box Size Diameter PCS Quantity 3" 1/2" " 1/2" " 5/8" " 5/8" " 3/4" " 7/8" 764 Bulk 14" 7/8" 820 Bulk 16" 7/8" 870 Bulk 18" 1" 1350 Bulk 20" 1" 1460 Bulk 24" 1" 1710 Bulk 30" Bulk Section VII Page 35

36 TOGGLE BOLTS WITH WINGS Figure 59 Wall Anchors Bolt WGT Box Size PCS Quantity 1/8 X 2" /8 X 3" /8 X 4" /16 X 2" /16 X 3" /16 X 4" /16 X 5" /4 X 3" /4 X 4" /4 X 5" /4 X 6" /16 X 3" /16 X 4" /16 X 5" /16 X 6" /8 X 3" /8 X 4" /8 X 5" /8 X 6" /2 X 3" /2 X 4" /2 X 6" TOGGLE WINGS Figure 5 Bolt WGT Case Size 1/8" PCS 0.7 Quantity /16" /4" /16" 3/8" /2" 6.5 Page 36 Section VII

37 STRAP-TOGGLE Figure STOGGLE Wall Anchors Anchor WGT Box Case Size PCS Quantity Quantity 3/16 X 4" 1/4 X 4" /8 X 4" /2 X 4" TOGGLER Figure TOGGLER Anchor WGT Box Case Size PCS Quantity Quantity 3/16 X 4" /4 X 4" /8 X 4" /2 X 4" WALL DOG "PAN HEAD" Figure WALLDOGP Screw Size Available Finishes 3/16 X 1 1/4" Chrome & White Head WGT Box Case PCS Quantity Quantity Available Finishes Chrome & White Head WALL DOG "OVAL HEAD" Figure WALLDOGO Screw WGT Box Case Size PCS Quantity Quantity 3/16 X 1 1/4" Section VIII Page 37

38 Wall Anchors E-Z ANCHOR Figure EZ25 Anchor WGT Box Case Type PCS Quantity Quantity Zinc E Z Plastic E Z * With #8 x 1 1/4" Screws 25 Zinc Anchors * ZIP-IT Figure EZ / EZP Anchor WGT Box Case Type Nylon Zip It Nylon Zip It* PCS Quantity Quantity 0 0 Zinc Zip It * With #8 x 1" screws Zinc Zip It* DRYWALL ANCHOR Figure HSP / HFP Anchor WGT Box Case Type PCS Quantity Quantity HSP Zinc HSP Zinc* HFP Nylon * With #8 x 1 3/16" screws HFP Nylon* Page 38 Section VIII

39 Wall Anchors POLY-SET ANCHORS Figure PSA & PSAK Anchor WGT Box Case Size PCS Quantity Quantity 3/16 X 1 1/4" 9/32 X 1 7/16" /16 X 1 1/4" Kit / 10 Kit includes screws and drill bit 9/32 X 1 7/16" Kit / BANTAM PLUG Figure PBK Anchor WGT Box Case Size PCS Quantity Quantity 6 8 X 3/4" X 7/8" X 1" X 1 1/2" X 3/4" Kit X 7/8" Kit Kit includes screws and drill bit X 1" Kit UNIVERSAL PLASTIC ANCHOR Figure HUD-1 Anchor WGT Box Case Size PCS Quantity Quantity 3/16 X 1" /4 X 1 3/16" /16 X 1 5/8" /8 X 2" /16 X 1" Kit Kit includes screws and drill bit 1/4 X 1 3/16" Kit Section VIII Page 39

40 BANG-IT Figure BANGIT Cast-In Anchors Anchor Size 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" Anchor Color Brown Green Yellow Red Purple Black Box Quantity Pallet Quantity /16" Carbide Hole Saw 1 3/16" Carbide Hole Saw CAST-IN ANCHOR Figure HCI-MD Anchor Box Size Quantity 1/4" 3/8" 1/2" 60 5/8" 60 3/4" 60 Page 40 Section IX

41 Cast-In Anchors * Coil Thread WOOD-KNOCKER Figure WK Anchor Anchor Box Pallet Size Color Quantity Quantity 1/4" Brown /8" Green /2" Yellow /8" Red /4" Purple *1/2" Yellow *3/4" Purple CAST-IN ANCHOR Figure HCI-WF Anchor Box Size Quantity 1/4" 150 3/8" 150 1/2" 5/8" 3/4" Secton IX Page 41

42 Cast-In Anchors ANCHOR BOLT Figure 177 Size PCS 3/8 X 6" /8 X 8" /8 X 10" 3/8 X 12" /2 X 6" /2 X 8" /2 X 10" /2 X 12" /8 X 6" 5/8 X 8" /8 X 10" 1.2 5/8 X 12" /4 X 6" /4 X 8" /4 X 10" /4 X 12" /8 X 6" /8 X 8" /8 X 10" *Available in different 7/8 X 12" diameters and lengths 1 X 6" X 8" Available Finishes 1 X 10" Plain, Electro Zinc, Hot Dipped Galvanized & Painted 1 X 12" Bolt WGT Page 42 Section IX

43 HAMMER SET ANCHORS Figure HSA Anchor Size 3/16 X 7/8" 1/4 X 3/4" 1/4 X 1" 1/4 X 1 1/4" 1/4 X 1 1/2" 1/4 X 2" Concrete Anchors WGT Box Case PCS Quantity Quantity HAMMER-SET ANCHORS Figure RHS Anchor WGT Box Case Size PCS Quantity Quantity 3/16 X 7/8" /4 X 3/4" /4 X 1" /4 X 1 1/4" /4 X 1 1/2" /4 X 2" ZAMAC NAILIN Figure PZN NYLON NAILIN Figure PNN Anchor WGT Box Case Size PCS Quantity Quantity 3/16 X 7/8" /4 X 3/4" /4 X 1" /4 X 1 1/4" /4 X 1 1/2" 1/4 X 2" Anchor WGT Box Case Size PCS Quantity Quantity 3/16 X 1" /16 X 1 1/2" /4 X 1" /4 X 1 1/2" /4 X 2" Section X Page 43

44 Concrete Anchors SETTING TOOL Figure ST Rod Size WGT PCS 1/4" /8" /2" /8" 45.0 *Used with Standard or Lipped Drop Ins 3/4" SETTING TOOL Figure STS Rod Size WGT PCS 1/4" /8" 39.0 *Used with Mini Drop Ins 1/2" 45.0 SETTING TOOL Figure HSAT & SHSAT Rod Size WGT PCS 1/4" /8" /2" 42.5 *Used with Hollow Set Anchors 5/8" 50.0 *Requires Hammer Drill SETTING TOOL Figure SIF Rod WGT Size PCS 3/8" /2" 40.0 Page 44 Section X

45 Concrete Anchors CARBIDE SDS DRILL BITS Figure SDSBIT Bit Size 5/32 X 6" 3/16 X 6" 1/4 X 6" 5/16 X 6" 3/8 X 6" 1/2 X 6" 5/8 X 8" 3/4 X 8" 7/8 X 8" 1 X 8" WGT PCS S-4 PLUS SDS Figure S4+SDS Bit Lengths Size Aviable 5/32" 6" 3/16" 4, 5, 6, 8, 10, 12 & 14" 7/32" 6, 8, 11, 14 &16" 1/4" 4, 6, 8, 11, 14, 16 & 20" 5/16" 6 & 12" 3/8" 6, 8, 12, 18 & 24" 7/16" 6 & 12" 1/2" 6, 10, 12, 18 & 24" 9/16" 6 & 10" 5/8" 8, 12 & 18" 11/16" 8 & 12" 3/4" 8, 12 & 18" 27/32" 8" 7/8" 8, 12 & 16" 1" 8, 10, 12 & 18" Section X Page 45

46 Concrete Anchors DROP-IN ANCHOR Figure 514 Rod Size WGT PCS Box Quantity Case Quantity 1/4" /8" /2" Available Finishes 5/8" Electro Zinc, Stainless 304 & Stainless 316 3/4" MULTI-SET II Figure RDI Part Rod WGT Box Case Number Size PCS Quantity Quantity RL-14 1/4" RL-38 3/8" RL-12 1/2" RL-58 5/8" RL-34 3/4" STEEL DROPIN Figure PDI Part Rod WGT Box Case Number Size PCS Quantity Quantity /4" /8" /2" /8" /4" DROP-IN ANCHOR Figure HDI Part Rod WGT Box Case Number Size PCS Quantity Quantity /4" /8" /2" /8" /4" Page 46 Section X

47 Concrete Anchors DROP-IN ANCHOR LIPPED Figure 514L Rod WGT Box Case Size 1/4" PCS 2.6 Quantity Quantity 0 3/8" /2" Available Finishes 5/8" Electro Zinc, Stainless 304 & Stainless 316 3/4" MULTI-SET II Figure RDIL Part Rod WGT Box Case Number Size PCS Quantity Quantity RM-14 RM-38 1/4" 3/8" RM-12 1/2" RM-58 5/8" RM-34 3/4" STEEL DROPIN Figure PDIL Part Rod WGT Box Case Number Size PCS Quantity Quantity /4" /8" /2" DROP-IN ANCHOR Figure HDIL Part Rod WGT Box Case Number Size PCS Quantity Quantity /4" /8" /2" Section X Page 47

48 Concrete Anchors Available Finishes Electro Zinc DROP-IN ANCHOR MINI Figure 514S Rod WGT Box Case Size PCS Quantity Quantity 1/4" /8" /2" MULTI-SET II Figure RDIS Part Rod WGT Box Case Number Size PCS Quantity Quantity RX-38 3/8" RX-12 3/8" STEEL DROPIN Figure PDIS Part Rod WGT Box Case Number Size PCS Quantity Quantity /4" /8" /2" DROP-IN ANCHOR Figure HDIP Part Rod WGT Box Case Number Size PCS Quantity Quantity /8" Page 48 Section X

49 Concrete Anchors HOLLOW SET ANCHOR Figure HSA Part Rod WGT Box Case Number Size PCS Quantity Quantity /4" /16" Available Finishes /8" Electro Zinc /2" /8" 21.0 SINGLE EXPANSION ANCHOR Figure SEA Part Rod Number Size /4" /16" /8" /2" WGT Box Case PCS Quantity Quantity Available Finishes /8" Electro Zinc /4" DOUBLE EXPANSION ANCHOR Figure DES Part Rod WGT Box Case Number Size PCS Quantity Quantity /4" /16" /8" /2" Available Finishes /8" Electro Zinc /4" Section X Page 49

50 Concrete Anchors EXPANSION BOLT Figure EB Bolt WGT Box Case Size PCS Quantity Quantity 1/4 X 1-3/4" 1/4 X 2-1/4" /4 X 3-1/4" /8 X 2-1/4" /8 X 2-3/4" /8 X 3" /8 X 3-1/2" /8 X 3-3/4" /8 X 5" /8 X 7" /2 X 2-3/4" /2 X 3-3/4" /2 X 4-1/2" /2 X 5-1/2" /2 X 7" /2 X 8-1/2" /8 X 3-1/2" 5/8 X 4-1/2" /8 X 5" /8 X 6" /8 X 7" /8 X 8-1/2" /8 X 10" /4 X 4-1/4" /4 X 4-3/4" /4 X 5-1/2" /4 X 6-1/4" /4 X 7" /4 X 8-1/2" /4 X 10" /4 X 12" /8 X 6" 7/8 X 8" /8 X 10" X 6" X 9" Available Finishes 1 X 12" Electro Zinc, Hot Dipped Galvanized 1-1/4 X 9" Stainless 304 & Stainless /4 X 12" Page 50 Section X

51 Concrete Anchors TRUE BOLT WEDGE ANCHOR Figure WS Bolt WGT Box Case Size PCS Quantity Quantity 1/4 X 1-3/4" /4 X 2-1/4" /4 X 3-1/4" /8 X 2-1/4" /8 X 2-3/4" /8 X 3" /8 X 3-3/4" /8 X 5" /8 X 7" /2 X 3-3/4" /2 X 3-3/4" /2 X 4-1/4" /2 X 4-1/2" /2 X 5-1/2" /2 X 7" /8 X 3-1/2" /8 X 4-1/4" /8 X 5" /8 X 6" /8 X 7" /8 X 8-1/2" /8 X 10" /4 X 4-1/4" /4 X 4-3/4" /4 X 5-1/2" /4 X 6-1/4" /4 X 7" /4 X 8-1/2" /4 X 10" /4 X 12" /8 X 6" /8 X 8" /8 X 10" Available Finishes 1 X 6" Electro Zinc, Hot Dipped Galvanized 1 X 9" Stainless 304 & Stainless X 12" Section X Page 51

52 POWER-STUD Figure PS Available Finishes Electro Zinc, Hot Dipped Galvanized Stainless 304 & Stainless 316 Concrete Anchors Bolt WGT Box Case Size PCS Quantity Quantity 1/4 X 1-3/4" /4 X 2-1/4" /4 X 3-1/4" /8 X 2-1/4" /8 X 2-3/4" /8 X 3" /8 X 3-1/2" /8 X 3-3/4" /8 X 5" /8 X 7" /2 X 2-3/4" /2 X 3-3/4" /2 X 4-1/2" /2 X 5-1/2" /2 X 7" /2 X 8-1/2" /8 X 3-1/2" /8 X 4-1/2" /8 X 5" /8 X 6" /8 X 7" /8 X 8-1/2" /8 X 10" /4 X 4-1/4" /4 X 4-3/4" /4 X 5-1/2" /4 X 6-1/4" /4 X 7" /4 X 8-1/2" /4 X 10" /4 X 12" /8 X 6" /8 X 8" /8 X 10" X 6" X 9" X 12" /4 X 9" /4 X 12" Page 52 Section X

53 Concrete Anchors KWIK BOLT 3 Figure KB Bolt WGT Box Case Size PCS Quantity Quantity 1/4 X 1-3/4" /4 X 2-1/4" /8 X 2-1/4" /8 X 3" /8 X 3-3/4" /8 X 5" /2 X 2-3/4" /2 X 3-3/4" /2 X 4-1/2" /2 X 5-1/2" /8 X 3-3/4" /8 X 4-3/4" /8 X 6" /8 X 7" /4 X 4-3/4" /4 X 5-1/2" Available Finishes 3/4 X 7" Electro Zinc, Hot Dipped Galvanized 1 X 6" Stainless 304 & Stainless X 9" Section X Page 53

54 Concrete Anchors LOK-BOLT Figure LB Head Style WGT Box Case Bolt Size PCS Quantity Quantity HN 5/16 X 1-1/2" HN 5/16 X 2-1/2" HN 3/8 X 1-7/8" HN 3/8 X 3" HN 3/8 X 4" HN 1/2 X 2-1/4" HN 1/2 X 3" HN 1/2 X 4" HN 1/2 X 5-1/4" HN 1/2 X 6" HN 5/8 X 2-1/4" HN 5/8 X 3" HN 5/8 X 4-1/4" HN 5/8 X 6" HN 3/4 X 2-1/2" HN 3/4 X 4" HN 3/4 X 5-3/4" HN 3/4 X 7-1/2" AN 1/4 X 5/8" AN 1/4 X 1-3/8" AN 1/4 X 2-1/4" RS 1/4 X 1-1/8" RS 1/4 X 2" RS 1/4 X 2-3/4" RS 1/4 X 3-3/4" RS 5/16 X 2-3/8" RS 5/16 X 3-3/8" Available Finishes RS 3/8 X 2-1/2" Electro Zinc & Stainless 304 RS 3/8 X 3-3/4" Page 54 Section X

55 Concrete Anchors LOK-BOLT Figure LB Head Style WGT Box Case Bolt Size PCS Quantity Quantity FH 1/4 X 1-1/8" FH 1/4 X 2" FH 1/4 X 3" FH 1/4 X 4" FH 1/4 X 5-1/4" FH 5/16 X 2-1/2" FH 5/16 X 3-1/2" FH 3/8 X 2-3/ FH 3/8 X 4" FH 3/8 X 5" FH 3/8 X 6" RC 3/8 X 1-1/2" HN AN Hex Nut Acorn Nut RC 3/8 X 1-7/8" RC 1/2 X 2-1/4" RS Round Head TH 1/4 X 2" FH Flat Head TW 5/16 X 1-1/2" RC Rod Coupling EX 1/4 X 1" TH Threshold Flat Head EX 5/16 X 1-1/8" TW Tie Wire EX 3/8X 1" EX Extenders EX 1/2 X 1-3/8" Section X Page 55

56 Concrete Anchors DYNABOLT Figure DB Head Style Bolt Size AN 1/4 X 5/8" WGT Box Case PCS 1.9 Quantity Quantity 0 AN 1/4 X 1-3/8" AN 1/4 X 2-1/4" HN 1/4 X 1-3/8" HN 1/4 X 2-1/4" HN 5/16 X 1-1/2" HN 5/16 X 2-1/2" HN 3/8 X 1-7/8" HN 3/8 X 3" HN 1/2 X 2-1/4" HN 1/2 X 3" HN 1/2 X 4" HN 5/8 X 2-1/4" HN 5/8 X 3" HN 5/8 X 4-1/4" HN 5/8 X 6" HN 3/4 X 2-1/2" HN 3/4 X 4" HN 3/4 X 6-1/4" FS 1/4 X 1-1/2" FS 1/4 X 2-1/4" FS 1/4 X 3-1/8" AN HN FS TH RS TW Acorn Nut Hex Nut Phillips Flat Head Threshold Flat Head Round Head Tie Wire FS 1/4 X 4" FS 3/8 X 2-7/8" FS 3/8 X 4" FS 3/8 X 5" FS 3/8 X 6" TH 1/4 X 2-1/4" RS 1/4 X 2-7/8" Available Finishes RS 3/8 X 2-5/8" Electro Zinc & Stainless 304 TW 5/16 X 1-1/2" Page 56 Section X

57 Concrete Anchors SLEEVE ANCHOR Figure HLC Head Style WGT Box Case Bolt Size PCS Quantity Quantity H 5/16 X 1-5/8" H 5/16 X 2-5/8" H 3/8 X 1-7/8" H 3/8 X 3" H 1/2 X 2-1/4" H 1/2 X 3" H 1/2 X 4" HX 5/16 X 1-5/8" HX 5/16 X 2-5/8" HX 3/8 X 1-7/8" HX 3/8 X 3" HX 1/2 X 2-1/4" HX 1/2 X 3" HX 1/2 X 4" HX 1/2 X 6" HX 5/8 X 2-1/4" HX 5/8 X 4-1/4" HX 5/8 X 6" HX 3/4 X 2-1/2" HX 3/4 X 4-1/4" HX 3/4 X 6-1/4" FPH 1/4 X 1-3/8" FPH 1/4 X 2" FPH 1/4 X 3" FPH 1/4 X 4" FPH 3/8 X 2-7/8" FPH 3/8 X 4" FPH 3/8 X 5" H HX FPH T AC RS RC Bolt Head Hex Nut Flat Phillips Head Tie Wire Head Acorn Head Round Head Slotted Rod Coupling FPH 3/8 X 6" T 1/4 X 1-3/8" AC 1/4 X 1-3/8" AC 1/4 X 2-1/4" RS 1/4 X 1-1/4" RS 1/4 X 2" RS 1/4 X 4" RC 3/8 X 1-7/8" Available Finishes RC 1/2 X 2-1/4" Electro Zinc & Stainless 304 RC 5/8 X 2-1/4" Section X Page 57

58 Available Finishes Electro Zinc & Stainless 304 WEDGE-BOLT Figure WB Concrete Anchors Bolt WGT Box Case Size PCS Quantity Quantity 1/4 X 1-1/4" /4 X 1-3/4" /4 X 2-1/4" /4 X 3" /8 X 1-3/4" /8 X 2-1/2" /8 X 3" /8 X 4" /2 X 2" /2 X 2-1/2" /2 X 3" /2 X 4" /2 X 5" /2 X 6" /8 X 3" /8 X 4" /8 X 5" /8 X 6" /4 X 3" /4 X 4" /4 X 5" /4 X 6" /4 X 8" Page 58 Section X

59 Concrete Anchors LARGE DIAMETER TAPCON Figure LDT Bolt WGT Box Case Size PCS Quantity Quantity 3/8 X 1-3/4" /8 X 2-1/2" /8 X 3" /8 X 4" /8 X 5" /2 X 3" /2 X 4" /2 X 5" /2 X 6" /8 X 3" /8 X 4" /8 X 5" /8 X 6" /4 X 4-1/2" Available Finishes 3/4 X 5-1/2" Electro Zinc & Stainless 304 3/4 X 6-1/4" Available Finishes Electro Zinc SCREW ANCHOR Figure HUS-H Bolt WGT Box Case Size PCS Quantity Quantity 3/8 X 2-1/8" /8 X 2-5/8" /8 X 3" /8 X 4" /8 X 5" /8 X 6" /2 X 2-1/2" /2 X 3" /2 X 4" /2 X 5" /2 X 6" /8 X 3" /8 X 4" /8 X 5" /8 X 6" Section X Page 59

60 Concrete Anchors TAPCON ANCHORS Figure TAPCON Screw WGT Box Case Size PCS Quantity Quantity 3/16 X 1-1/4" /16 X 1-3/4" /16 X 2-1/4" /16 X 2-3/4" /16 X 3-1/4" /16 X 3-3/4" /16 X 4" /16 X 5" /16 X 6" /4 X 1-1/4" /4 X 1-3/4" /4 X 2-1/4" /4 X 2-3/4" Available Styles Hex Head & Flat Head 1/4 X 3-1/4" 1/4 X 3-3/4" /4 X 4" Available Finishes 1/4 X 5" Climaseal & Stainless 304 1/4 X 6" TAPCON STARTER KIT Figure TSK Kit Includes 1/4 X 1-1/4" 1/4 X 1-3/4" Condrive 0 Quantity 1 CONDRIVE 0 Figure C0 Kit Includes Quantity Drill Adapter Sleeve 1 1 3/16" Socket 1 1/4" Socket 1 Phillips Socket 1 #2 Phillips Bit #3 Phillips Bit 1 1 1/8" Hex Key 1 Page 60 Section X

61 Concrete Anchors TAPPER CONCRETE SCREW Figure TAPPER Screw WGT Box Case Size PCS Quantity Quantity 3/16 X 1-1/4" /16 X 1-3/4" /16 X 2-1/4" /16 X 2-3/4" /16 X 3-1/4" 3/16 X 3-3/4" /16 X 4" /4 X 1-1/4" /4 X 1-3/4" /4 X 2-1/4" /4 X 2-3/4" /4 X 3-1/4" Available Styles 1/4 X 3-3/4" Hex Head & Flat Head 1/4 X 4" /8 X 2" Available Finishes 3/8 X 3" Blue Perma-Seal, White Perma-Seal, 3/8 X 4" Coated Silver, Zinc, Stainless 304, 3/8 X 5" 13.0 Stainless 410 & Bronze 3/8 X 6" 15.5 TAPPER 0 Figure T0 Kit Includes Quantity Drill Adapter 1 Sleeve 1 3/16" Socket 1 1/4" Socket 1 Phillips Socket #2 Phillips Bit #3 Phillips Bit 1/8" Hex Key Section X Page 61

62 Available Styles Torx Hex Head, Torx Flat Head & Phillips Head Available Finishes Zinc Plated & Stainless KWIK-CON II+ Figure KWIKCON Concrete Anchors Screw WGT Box Case Size PCS Quantity Quantity 3/16 X 1-1/4" 3/16 X 1-3/4" /16 X 2-1/4" /16 X 2-3/4" /16 X 3-1/4" /16 X 3-3/4" 3/16 X 4" /4 X 1-1/4" /4 X 1-3/4" /4 X 2-1/4" /4 X 2-3/4" 1/4 X 3-1/4" /4 X 3-3/4" /4 X 4" /8 X 2" /8 X 3" 3/8 X 4" KWIK-CON DELUXE KIT Figure KWIKCONKIT Kit Includes Inset Bit #3 PHL Quantity 1 Inset Bit Torx #27 1 Insets Bit Torx #25 1 Hex Drvier 1 5/16" Hex Drvier 5/16" Hex Setter 1 1 Insert Bit Holder 1 1/8" Hex Key 1 Page 62 Section X

63 TRUBOLT+ Figure CWS Cracked Concrete Bolt WGT Box Case Size PCS Quantity Quantity 1/2 X 4-1/2" 1/2 X 4-1/2" /2 X 5-1/2" /8 X 5" /8 X 6" /8 X 7" /8 X 8-1/2" SNAKE+ Figure PSA+ Part Rod Box Case Number Size Quantity Quantity 6401SD 3/8" VERTIGO+ Figure PCV+ Rod WGT Box Case Size 1/4" PCS Quantity Quantity 500 3/8" 500 1/2" Section XI Page 63

64 Cracked Concrete POWER-STUD+SD1 Figure PS+ Bolt WGT Box Case Size PCS Quantity Quantity *1/4 X 1-3/4" /4 X 2-1/4" /4 X 3-1/4" *3/8 X 2-1/4" *3/8 X 2-3/4" /8 X 3" /8 X 3-1/2" /8 X 3-3/4" /8 X 5" /8 X 7" *1/2 X 2-3/4" /2 X 3-3/4" /2 X 4-1/2" /2 X 5-1/2" /2 X 7" /2 X 8-1/2" *5/8 X 3-1/2" *5/8 X 4-1/2" /8 X 4-3/4" /8 X 5" /8 X 6" * Less than the minimun embedment 5/8 X 7" for strenght design. 5/8 X 8-1/2" Page 64 Section XI

65 POWER-STUD+SD2 Figure PS+2 Bolt Size 3/8 X 3" 3/8 X 3-1/2" 3/8 X 3-3/4" 3/8 X 5" 1/2 X 2-3/4" 1/2 X 4-1/2" 1/2 X 5-1/2" 1/2 X 7" 1/2 X 8-1/2" 5/8 X 4-3/4" 5/8 X 5" 5/8 X 6" 5/8 X 7" 5/8 X 8-1/2" 3/4 X 5-1/2" 3/4 X 6-1/4" 3/4 X 7" 3/4 X 8-1/2" Cracked Concrete WGT Box Case PCS Quantity Quantity Section XI Page 65

66 Cracked Concrete WEDGE-BOLT+ Figure WB+ 1/4 X 2-1/4" /4 X 3" *3/8 X 1-3/4" /8 X 2-1/2" /8 X 3" /8 X 4" /8 X 5" /8 X 6" *1/2 X 2" *1/2 X 2-1/2" /2 X 3" /2 X 4" /2 X 5" /2 X 6" /2 X 6-1/2" /2 X 8" *5/8 X 3" /8 X 4" /8 X 5" /8 X 6" /8 X 8" *3/4 X 3" *3/4 X 4" /4 X 5" /4 X 6" * Less than the minimun embedment 3/4 X 8" for strenght design. 3/4 X 10" Bolt Size *1/4 X 1-1/4" *1/4 X 1-3/4" WGT Box Case PCS Quantity Quantity Page 66 Section XI

67 PE0+ Figure PE0+ Cracked Concrete Tube Box Case Size Quantity Quantity PE0+ 13oz AC+Gold Figure AC+ Tube Box Case Size Quantity Quantity Injection System oz. Quik-Shot oz. SBS oz. SBS oz. SBS - 8 EPCON G5 Figure G5 Tube Size PE0+ 13oz. Box Case Quantity Quantity - 6 Section XI Page 67

68 POWER-FAST+ Figure PF+ Adhesive Tube Box Case Size Quantity Quantity PF+ 15oz - 12 PF+ 22oz 12 Available Colors White & Grey POWERSTICK Figure PSTICK Tube Box Case Size Quantity Quantity 7oz oz EPCON A7 Figure A7 Tube Box Case Size Quantity Quantity A7 28oz - 6 A7 10oz - 6 A7 8oz - 6 A7 5 oz - 12 EPCON C6 Figure C6 Tube Size Box Quantity Case Quantity C6 18oz - 6 Page 68 Section XII

69 HIT-HY 50 Figure HITHY50 Adhesive Tube Box Case Size Quantity Quantity 330ml ml 4 HIT-HY 20 Figure HITHY20 Tube Box Case Size Quantity Quantity 330ml ml 4 HIT-ICE Figure HITICE Tube Box Case Size Quantity Quantity 297ml - 24 Section XII Page 69

70 WOOD VERTICAL HANGER Figure WVH Rod Size X Length Rod Hanger WGT PCS Box Quantity 1/4 X 2" 6.5 3/8 1" 4.8 3/8 X 2" 6.0 3/8 X 2-1/2" 9.1 3/8 X 3" 9.2 3/8 X 4" 9.5 1/2 X 2-1/2" 10.0 WOOD SIDE HANGER Figure WSH Rod Size X Length WGT PCS Box Quantity 1/4 X 2" 8.0 3/8 X 1" 6.0 3/8 X 2" 7.0 3/8 X 2-1/2" 10.3 CONCRETE VERTICAL HANGER Figure CVH Rod Size X Length 1/4 X 1-1/2" 3/8 X 1-1/2" 1/2 X 2-3/4" WGT Box PCS Quantity ROD HANGER NUT DRIVER Figure ND Part Number Product Type WGT PCS ND1 STEEL & WOOD 10.5 ND2 1/4" CONCETE 4.0 ND3 3/8" CONCRETE 11.0 ND4 1/2" CONCRETE 18.0 Page 70 Section XIII

71 Rod Hanger STEEL VERTICAL HANGER Figure SVH & SVHN Rod Size X Length WGT PCS Box Quantity 1/4 X 1" 5.3 *3/8 X 1" 5.3 3/8 X 1-1/2" 5.5 *3/8 X 1-1/2" 5.8 * With Hex Nuts 3/8 X 2" 5.3 TEK VERTICAL HANGER Figure TVHN Rod Size X Length WGT PCS Box Quantity 1/4 X 1-1/2" 5.5 3/8 X 1-1/2" 5.5 1/2 X 1-1/2" 6.0 STEEL SIDE HANGER Figure SSH & SSHN Rod Size X Length 1/4 X 1" WGT Box PCS Quantity 6 *3/8 X 1" 7.3 *3/8 X 1-1/2" * With Hex Nuts *3/8 X 2" 5.3 TEK SIDE HANGER Figure TSHN Rod Size X Length WGT PCS Box Quantity 1/4 X 1-1/2" 5.5 3/8 X 1-1/2" 6.0 Section XIII Page 71

72 Rod Hanger SS Stainless Steel SH Swivel Head SAMMYS FOR WOOD Figure GST Part Rod Screw WGT Number Size Size PCS GST 1/4" 1/4 X 1" 5.0 GST200 1/4" 1/4 X 2" 6.5 GST300 1/4" 1/4 X 3" 7.0 GST.75 3/8" 1/4 X 3/4" 4.8 GST10 3/8" 1/4 X 1" 4.8 GST20 3/8" 1/4X 2" 6.0 GST20SS 3/8" 1/4 X 2" 6.0 GST /8" 3/8 X 2-1/2" 9.3 GST30 3/8" 1/4 X 3" 7.0 GST30SS 3/8" 1/4 X 3" 7.0 GST40 3/8" 1/4 X 4" 7.2 GST60 3/8" 1/4 X 6" 8.0 GST2 1/2" 1/4 X 2" 6.0 GST /2" 3/8 X 2-1/2" 10.0 GST3 1/2" 1/4 X 3" 7.0 GST4 1/2" 1/4 X 4" 7.2 GST6 1/2" 1/4 X 6" 8.0 SHGST20 3/8" 1/4 X 2" 6.0 SHGST30 3/8" 1/4 X 3" 7.0 SIDEWINDERS FOR WOOD Figure SWG Part Rod Screw WGT Number Size Size PCS SWG 1/4" 1/4 X 1" 7.5 SWG200 1/4" 1/4 X 2" 8.0 SWG10 3/8" 1/4 X 1" 6.0 SWG20 3/8" 1/4 X 2" 7.0 SWG20SS 3/8" 1/4 X 2" 7.0 SWG /8" 3/8 X 2-1/2" 10.3 SWG30 3/8" 1/4 X 3" 8.5 Page 72 Section XIII

73 Rod Hanger SAMMYS FOR STEEL Figure DST Part Rod Screw WGT Number Size Size PCS DSTR 1/4" 1/4 X 1" 5.2 DSTR10 1/4" 1/4 X 1" 5.2 DST150 1/4" 1/4 X 1-1/2" 6.8 DST200 1/4" 1/4 X 2" 6.0 TEK500 1/4" X 1-1/2" 5.5 DSTR1 3/8" 1/4 X 1" 5.8 DSTR1-1/2 DSRT516 3/8" 3/8" X 1-1/2" 5/16 X 1-1/4" DST10 3/8" 1/4 X 1" 4.8 DST10SS 3/8" 1/4 X 1" 5.2 DST15 3/8" 1/4 X 1-1/2" 5.3 DST15SS DST20 3/8" 3/8" 1/4 X 1-1/2" 1/4 X 2" DST25 3/8" 1/4 X 2-1/2" 6.3 DST30 3/8" 1/4 X 3" 6.6 DST516 3/8" 5/16 X 1-1/4" 7.2 TEK50 3/8" X 1-1/2" 5.5 DST2.0 1/2" 1/4 X 2" 6.0 DSTR1.0 1/2" 1/4 X 1" 7.0 DSTR5.16 1/2" 5/16 X 1-1/4" 7.2 DST5.16 1/2" 5/16 X 1-1/4" 7.2 SS Stainless Steel TEK5.0 1/2" X 1-1/2" 6.0 SH Swivel Head SHDSTR1 3/8" 1/4 X 1" 5.2 SIDEWINDERS FOR STEEL Figure SWD Part Rod Screw WGT Number Size Size PCS SWD 1/4" 1/4 X 1" 6.0 SWDR 1/4" 1/4 X 1" 6.0 SWD10 3/8" 1/4 X 1" 6.0 SWD10SS 3/8" 1/4 X 1" 6.0 SWD15 3/8" 1/4 X 1-1/2" 6.3 SWD15SS 3/8" 1/4 X 1-1/2" 6.3 SWD20 3/8" 1/4 X 2" 6.5 SWD516 3/8" 5/16 X 1-1/4" 7.5 SWDR1 3/8" 1/4 X 1" 7.0 SWDR1-1/2 3/8" X 1-1/2" 7.3 SWDR516 3/8" 5/16 X 1-1/4" 7.2 SS Stainless Steel SWT15 3/8" X 1-1/2" 7.3 Section XIII Page 73

74 Rod Hanger SAMMYS X-PRESS Figure XP Part Rod Screw WGT Number Size Size PCS XP200 1/4" 1/4" X 1" 5.5 XP20 3/8" 1/4" X 1" 5.7 XP35 3/8" 1/4" X 1" 5.7 SXP20 3/8" 1/4" X 1" 5.7 S Swivel Head SXP35 3/8" 1/4" X 1" 5.7 SW Sidewinder SWXP35 3/8" 1/4" X 1" 5.7 SAMMYS FOR CONCRETE Figure CST Part Rod Screw WGT Number Size Size PCS CST200 1/4" 5/16 X 1-3/4" 6.8 CST20 3/8" 5/16 X 1-3/4" 6.3 CST20SS 3/8" 5/16 X 1-3/4" 6.3 CST2 1/2" 5/16 X 1-3/4" 3.5 SWC200 1/4" 5/16 X 1-3/4" 7.5 SW Sidewinder SWC20 3/8" 5/16 X 1-3/4" 7.5 SAMMYS TOGGLE FOR DRYWALL Figure SST Part Rod Screw WGT Number Size Size PCS SST300 1/4" 1/4 X 3" 10.1 SST30 3/8" 1/4 X 3" 10.1 SAMMYS TOOLS Figure #14 Part Product Color Number Type #14 #14SW SAMMYS SIDWINDERS Black Red #14SH SWIVEL HEAD Orange UXPIT X-PRESS Zinc Page 74 Section XIII

75 Rod Hanger VERTIGO STEEL VERTICAL Figure PSV Part Number Rod Size Screw Size WGT PCS /4" 1/4 X 1" /8" 1/4 X 2" /8" 1/4 X 1" /8" 1/4 X 1-1/2" /8" 1/4 X 1-1/2" /4" X 1-1/2" /8" X 1-1/2" /2" X 1-1/2" 6.0 VERTIGO WOOD VERTICAL Figure PWV Part Rod Screw WGT Number Size Size PCS /4" 1/4 X 2" /8" 1/4 X 1" /8" 1/4 X 2" /8" 1/4 X 3" /8" 1/4 X 4" /8" 3/8 X 2-1/2" 10.0 VERTIGO CONCRETE VERTICAL Figure PCV Part Rod Screw WGT Number Size Size PCS /4" 1/4 X 1-1/4" /8" 1/4 X 1-1/2" /2" 3/8 X 2-3/4" 7.0 Section XIII Page 75

76 Rod Hanger VERTIGO STEEL SIDE Figure PSS Part Rod Screw WGT Number Size Size PCS /4" 1/4 X 1" /8" 1/4 X 1" /8" 1/4 X 1-1/2" /8" 1/4 X 2" /4" X 1-1/2" /8" X 1-1/2" 6.0 VERTIGO WOOD SIDE Figure PWS Part Rod Screw WGT Number Size Size PCS /4" 1/4 X 1" /8" 1/4 X 1" /8" 1/4 X 2" /8" 3/8 X 2-1/2" 10.3 VERTIGO SOCKET Figure PSOCKET Part Product WGT Number Type PCS 7187 STEEL & WOOD /4" CONCETE /8" CONCRETE /2" CONCRETE 18.0 Page 76 Section XIII

77 Saw Blades RECIPROCATING BLADES Figure BLADE Part TPI WGT Number PCS M M M M12 10/ W W W *Other Sizes Available W BANDSAW BLADES Figure BLADEBAND Blade Size 3'8-7/8 X 1/2" TPI WGT PCS HOLE SAWS Figure HOLESAW TPI WGT PCS 1" /2" " /2" " " " *Other Sizes Available 6" Section XIV Page 77

78 NOTES

79 CARPENTER & PATERSON, INC. DESIGNERS ENGINEERS MANUFACTURERS SPECIALS, SPECIALS AND MORE SPECIALS Our manufacturing facilities are equipped with a number of different machines for manufacturing special fasteners and rods. In addition, we have a substantial network of fastener suppliers, both domestic and international, which allows us to service all of your construction fastener needs. If you don't see what you are looking for in our abbreviated Construction Fastener Catalog, please call your nearest Carpenter & Paterson sales office for assistance. Smaller fasteners are boxed for easier handling. Large special alloy U-bolts are manufactured in our Donora, PA facilities. Forged clevises are attached to threaded rods with lock nuts and tagged. Assembling and tagging is an addedvalue service to simplify field erection. We can thread up to 6" diameter and can provide a variety of coatings for corrosion protection. Call your local sales office for additional fastener prices and availability

80 CONTACT YOUR NEAREST CARPENTER & PATERSON LOCATION AT: SALES OFFICES AND MASSACHUSETTS NEW JERSEY (North) WAREHOUSES: 225 Merrimac Street 369 Jefferson Avenue Woburn, MA Saddle Brook, NJ Telephone: (781) Telephone: (973) Fax: (781) Fax: (973) MARYLAND NEW JERSEY (South) 8941 D'Arcy Road 3900 River Road Upper Marlboro, MD Pennsauken, NJ Telephone: (301) Telephone: (856) Fax: (301) Fax: (856) PENNSYLVANIA 484 Galiffa Drive Donora, PA Telephone: (724) Fax: (724) MANUFACTURING PLANTS: NEW JERSEY 369 Jefferson Avenue Saddle Brook, NJ Telephone: (973) Fax: (973) PENNSYLVANIA 484 Galiffa Drive Donora, PA Telephone: (724) Fax: (724) EXECUTIVE OFFICES CARPENTER & PATERSON, INC. 225 Merrimac Street, Woburn, MA Tel: (781) Fax: (781) e mail: cpsales@carpenterandpaterson.com CARPENTER & PATERSON, INC. DESIGNERS ENGINEERS MANUFACTURERS