Inline & Sidewall Exhaust Fans
|
|
- Dorothy Gaines
- 5 years ago
- Views:
Transcription
1 F, F 28 Inline & Sidewall xhaust Fans est vailable 3 ays F UL/cUL 705 Power Ventilators F with TF motors F with TF motors F F is M Licensed for ir Performance F is M Licensed for Sound and ir Performance F and F elt rive entrifugal duct fans are designed for clean air inline exhaust or supply applications. Quick uild Performance F capacities range from 200 to 6,000 cfm and 1.5 in. wg of static pressure. F capacities range from 300 to 15,000 cfm and 3 in. wg of static pressure. Standard onstruction F F Housing - galvanized steel Housing - low profile Housing - square rive frame secured to housing Wheel - forward-curved, galvanized steel Motor and scroll - mounted to drive frame ccess door - bolted, removable (F-108/208 and larger, all F) ccess door - hinged (F-106, 107, 206 and 207) orrosion-resistant fasteners NM-1 disconnect switch all bearing motor - 1/4 hp and larger ouble-studded vibration isolators Flanges - inlet and outlet djustable motor pulley Options and ccessories F F amper Isolators Insulation Filter box* - filters are throwaway (pleated) or permanent (aluminum mesh) Mixing box NM rated disconnect switch ual drives Multiple discharge positions* ecorative or protective powder coating UL/cUL Listed Power Ventilators *see page 31 for additional information INLT OPNING F 2 in. 1 in. imensions for F Top horizontal discharge F ll dimensions are in inches. W MPR OUTLT OPNING imensions for F ottom horizontal discharge H 1 in. amper Outlet Opening (W x H) Inlet Opening ( x ) x x x x x x x x x x x x x x 36 ll dimensions are in inches. Inline and eiling Fans catalog found on or
2 SQ UL/cUL 705 Power Ventilators SQ and SQ SQ-75 through 120 and 140 SQ-70 through 120, 140 through 180 and 240 SQ-60 through 70, 130 thru 160 High Pressure SQ-130HP through 160HP SQ-130 and 200 High Pressure SQ-130HP through 240HP SQ-300 through 420 High Pressure SQ-300HP and 360HP SQ UL/cUL Listed 705 is standard on In Stock models. SQ and SQ are M Licensed for Sound and ir Performance est vailable In Stock 1 ay 3 ays SQ irect rive and SQ elt rive entrifugal inline fans are designed for clean air exhaust or supply applications. Quick elivery / Quick uild Performance SQ capacities range from 80 to 5,025 cfm and 1.75 in. wg of static pressure. SQ capacities range from 60 to 26,600 cfm and 4 in. wg of static pressure. Standard onstruction SQ SQ Housing - galvanized Wheel - backward-inclined, aluminum ccess panel - bolted, removable orrosion-resistant fasteners NM-1 disconnect switch all bearing motor - 1/4 hp and larger Three speed motor - sizes 60 through 95 djustable motor plate Flanges - inlet and outlet djustable motor pulley Options and ccessories Stock SQ SQ Vari-Green motor - 80% turndown, 85% efficient vailable as standard on select sizes amper luminum housing Motor cover Guards - inlet, outlet Speed control Isolators - external Insulation - housing and motor cover Filter box* - slide out NM rated disconnect switch ual drives Relubricatable bearings Multiple discharge positions* ecorative or protective powder coating UL/cUL Listed Power Ventilators *see page 31 for additional information 29 SQ, SQ imensions for SQ & imensions for SQ & H* 60, 65, 70, * 70, 80, , 85, , 98, , 130 HP , 140 HP , 130 HP , 140 HP , 160 HP ll dimensions are in inches. Select sizes and models with the Vari-Green motor are available in stock. 160, 160 HP , 180 HP , 200 HP , 240 HP , 300 HP , 360 HP ll dimensions are in inches. *imension may be greater depending on motor catalog found on or Inline and eiling Fans
3 Options, ccessories, ischarge Positions SQ and SQ Options and ccessories Hanging Vibration Isolator - HVI (Hanging rods supplied by others) Inlet Guard ase Vibration Isolator VI ackdraft amper W-330 Motor over 30 Side ischarge The side discharge option provides several advantages from removing a system effect problem, to increasing performance and even reducing installation labor. The most notable is reducing system effect. Refer to Figure 1. It shows the air being discharged into the corner. It will take several duct lengths before the airflow becomes laminar or smooth again after making the turn. In Figure 2, the fan is placed in the corner using a side discharge. In this configuration the airflow pattern at discharge is smooth and supports a more predictable system. Remember the duct length on the discharge side should be approximately two to three wheel diameters to achieve catalog performance. Fan Figure 1 Fan Figure 2 Multiple ischarge Positions F fans are available with either top horizontal or upblast discharge positions. F fans have been designed for horizontal mounting and are standard with a bottom horizontal discharge. Optional top horizontal discharge is also available. SQ and SQ fans are available with right side discharge, left side discharge, inline discharge positions, or a combination of right, left and inline positions. F ischarge Positions F ischarge Positions Top Horizontal Upblast ottom Horizontal Top Horizontal SQ and SQ ischarge Positions Right Side Left Side Inline ombination Inline and eiling Fans
4 Filter ox Filter boxes incorporate a V-bank design constructed of galvanized steel. Filters are available in 1 or 2 inch throwaway (pleated) or permanent (washable aluminum mesh). Side access panels are standard for easy maintenance. F Fan ccess Panel ll dimensions are in inches. The K dimension equals the length of fan and filter box combined. K Filter ox ccess Panel K Filter No. of Filters x x x x x x x Filter ox, Insulated Housing Slanted Filter F K Mixing ox Filter ox Fan Filter No. of Filters Single ouble K Single ouble Single ouble Fan Fan Fan Fan Fan Fan x x x x x x x x x x For slide-out filter box information, refer to F catalog. ouble V-ank Filter luminum Mesh Filter SQ, SQ SQ K Filter No. of Filters 60, 65, 70, x , 95, 90, x , 98, x x x , 130HP x , 140HP x , 160HP x 20 4 K SQ K Filter No. of Filters 70, 80, x x x , 130HP x , 140HP x , 160HP x , 180HP x , 200HP x x , 240HP x x , 300HP x , 360HP x x x x Insulated Housing The interior of the fan housing and filter box can be lined with a fiberglass duct liner for noise reduction and condensation control. The duct liner can be utilized to reduce radiated noise from inline fan housings. It is recommended for applications when fans are placed in acoustically sensitive locations. The duct liner also reduces the noise radiating from the inlet and outlet of the fan. Inline and eiling Fans
5 T 32 UL/cUL 705 Power Ventilators T UL 762 Power Ventilators for Restaurant xhaust ppliances - MH T T is M Licensed for Sound and ir Performance onstruction Standard With UL 762 est vailable 10 ays 15 ays T elt rive Tubular centrifugal inline fans are the ideal choice for installations with straight-through airflow in ducted systems. The centrifugal wheels used in this design provide higher efficiencies and lower sound levels than axial type inline fans when used in medium pressure ducted systems. These fans can be mounted in any position from horizontal to vertical, allowing installation in the smallest possible space at the lowest installation cost. lso available in roof supply and roof exhaust configurations. Quick uild Performance apacities range from 300 to 26,000 cfm and up to 4.0 in. wg of static pressure. Standard onstruction Housing - continuously welded, steel Wheel - backward-inclined, aluminum Flanges - inlet and outlet with mounting holes Universal mounting system luminum rub ring Options and ccessories ll aluminum construction Motor cover elt guard Guards - inlet, outlet ompanion flanges - inlet, outlet Isolators - base, hanging NM rated disconnect switch asy access construction - bolted Inspection door - bolted, hinged Spark resistant construction xtended lube lines Minimum bearing life of L 10 80,000 hours (verage life - L ,000 hours) Permectector protective powder coating Inspection section with removable access panel ual drives Mounting rails ecorative or protective powder coating UL/cUL Listed Power Ventilators UL Listed Power Ventilators for Restaurant xhaust ppliances * Maximum with Motor over H imensions for T * H ll dimensions are in inches. *imension may vary depending on motor. Inline and eiling Fans catalog found on or
6 UL/cUL 705 Power Ventilators Q UL/cUL 705 is optional and must be specified. Q is M Licensed for Sound and ir Performance est vailable 10 ays Q elt rive Q is ideal when clean air, quiet and economical operation is required. The unique octagonal housing of formed galvanized steel panels provides for exceptional strength at significantly lower cost. Quick elivery / Quick uild Performance apacities range from 550 to 23,000 cfm and up to 3 in. wg of static pressure. Standard onstruction Octagonal galvanized housing luminum mixed flow wheel Z Tension System for belt adjustment NM-1 disconnect switch Options and ccessories Motor cover Inlet and outlet guards Vibration isolators ccess doors xtended wiring pigtail Thrust restraints UL/cUL Listed Power Ventilators 33 Q uct ollar O.. imensions for Q * *Motor cover is optional. may be greater depending on motor. ll dimensions are in inches. catalog found on or Inline and eiling Fans
7 QI-I/II 34 est vailable 10 ays Patented QI US Patent No hina (P.R.) Patent No. N Mexico Patent No UL/cUL 705 Power Ventilators QI-I/II UL/cUL 762 Power Ventilators for Restaurant xhaust ppliances - MH QI-I/II UL/cUL Power Ventilators for Smoke ontrol Systems MH QI-I/II, QI QI-I/II are M Licensed for Sound and ir Performance QI-I/II elt rive Mixed flow fans are for use in commercial and industrial applications that demand quiet, efficient and reliable air movement. Typical applications include office buildings, concert halls, libraries, parking garages, educational facilities and dormitories. s can be used in exhaust, supply, and return-air; clean or contaminated air ventilation installations with continuous airstream temperatures up to 200 F. Units may be ceiling hung or floor mounted. Quick uild Performance QI-I/II capacities range from 500 to 50,000 cfm and up to 7.5 in. wg of static pressure. Standard onstruction Housing - continuously welded, steel Minimum bearing life of L 10 80,000 hours (verage life - L ,000 hours) Impeller - mixed flow with steel blades Straightening vanes Universal mounting system (sizes 9-27) ccess door - bolted Final assembly vibration analysis Slip-fit collar for duct connection xtended lube lines - nylon elt guard Permatector protective powder coating Options and ccessories Totally enclosed belt guard Motor cover Guards - inlet, outlet Flanges - inlet, outlet Isolators - base, hanging elt tube NM rated disconnect switch opper lube lines Mounting rails - horizontal and all vertical applications ecorative or protective powder coating UL/cUL Listed Power Ventilators UL/cUL Listed Power Ventilators for Restaurant xhaust ppliances UL/cUL Listed Power Ventilators for Smoke ontrol Systems Universal Mounting (s 9-27) Universal QI fans can be mounted vertically (ceiling hung or base mount) for either upward or downward airflow. Optional mounting rails are suggested for any vertical installation. One configuration for base mounting or ceiling hung applications. llows for field rotation of motor position. Motor Positions determined from the discharge end Optional Mounting Rails H G Horizontal ase Mount Horizontal ase Mount with motor at or G position Horizontal eiling Hung Optional Mounting Rails Horizontal eiling Hung with motor at or G position Horizontal ase Mount Horizontal Mounting (s 30-40) vailable in horizontal and vertical configurations. Horizontal applications allow for field rotation of motor position. Vertical Mounting (s 9-40) Vertical mounting configurations, upblast or downblast, are provided with heavy-duty steel brackets welded to both ends. These brackets permit either floor or ceiling mounting on the same unit. Optional mounting rails are suggested for any vertical installation for sizes Vertical eiling Hung G F Horizontal eiling Hung Vertical ase Mount Inline and eiling Fans catalog found on or
8 Mixed Flow - QI-I/II The mixed flow fan is a quiet, highly efficient alternative for inline ventilation. The unique axial/centrifugal hybrid impeller design captures the highly efficient straight-through airflow of vane axials and the lower sound levels of tubular centrifugal fans to provide an energy efficient product that won t be a distraction in your ventilation system. Flexible Universal Mounting System allows for field rotation of motor location. ll motors are mounted on adjustable pivot bases for easy adjustments. Sealed belt guard protects personnel and minimizes air leakage around motor shaft. QI-L, QI-I/II Permatector coating is an industrial grade, electrostatic powder paint. Provides a durable, long lasting finish for interior or exterior applications. xtended collar on inlet and outlet allow for quick and easy slip-fit duct connections to ductwork or plenum wall. Flexible Sleeve Integral, spun inlet cone provides even airflow into the impeller in ducted or non-ducted applications and helps to reduce system effects associated with uneven duct velocity profiles. Mixed flow impellers are designed with single-thickness, cambered blades to maximize free area and efficiency. Tight wheel to cone tolerances further improve the mechanical efficiency. erodynamically designed straightening vanes improve performance by converting kinetic energy of swirling air into useful static pressure. Fan uct ast, flange-mounted bearings are air-handling quality and use concentric bore locking systems for smooth operation. earings are selected for a minimum L 10 life in excess of 80,000 hours at the maximum fan class RPM. (verage life - L ,000 hours) 35 irflow Profiles entrifugal Fan: Two 90 deflections, before airflow exits the fan. xial Fan: Straight-through, nearly linear airflow. Mixed Flow QI Fan: Slight airflow defection from straight-through. Lower Sound Power, etter Sound Quality The sound quality of the QI is as beneficial to low sound design as is the reduced overall sound power. The sound chart compares units of similar outer tube diameters at an operating point of 20,000 cfm with 1.5 inches wg of static pressure (Ps). Tubular centrifugals (green) have dominant tones in the 63 Hz through 250 Hz octave bands, while vane axials (red) have more mid to high frequency sound. The QI does not have a dominant tone. bystander would hear a more bland sound that is quieter than a tubular centrifugal or vane axial. Sound Power, d Typical Tubular entrifugal Typical Vane xial QI Frequency, Hz Inline and eiling Fans
9 TI, TI-, TI-FS pplications: lean ir Fume xhaust Spark Resistant onstruction TI irect rive TI direct drive tube axial fans are best suited for applications moving relatively clean, dry and cool air in commercial and industrial applications. Quick uild Performance apacities range from 3,000 to 49,000 cfm and up to 1.1 in. wg of static pressure. pplications: lean ir Fume xhaust Spark Resistant onstruction TI- elt rive TI- belt drive is a good selection where the motor must be mounted out of the airstream. Used with temperatures up to 200 F or contaminated air. Three levels of construction available. Quick uild Performance apacities range from 1,300 to 95,000 cfm and up to 3.5 in. wg of static pressure. 36 pplications: Industrial Space ontaminated ir High Temperature Process UL/cUL mergency Smoke est vailable 10 ays UL/cUL 705 Power Ventilators TI and TI- UL/cUL Power Ventilators for Smoke ontrol Systems MH TI-FS TI and TI- are M Licensed for ir Performance TI-FS is M Licensed for Sound and ir Performance TI-FS elt rive TI-FS belt drive fans have motors out of the airstream. They are a good choice for clean or contaminated airstreams with temperatures up to 400 F. Three levels of construction available. Quick uild Performance apacities range from 6,000 to 77,000 cfm and up to 4.5 in. wg of static pressure. Standard onstruction TI TI- TI-FS Housing - continuously welded, steel ast aluminum hub and blades - airfoil Fabricated steel hub and blades - airfoil elt tube and bearing cover Minimum bearing life of L 10 80,000 hours Universal mounting system xtended lubrication lines Permatector protective powder coating Options and ccessories TI TI- TI-FS Motor cover Guards - inlet, outlet elt guard ompanion flanges Isolators - base, hanging, spring asy access construction - bolted Inspection door - bolted, hinged Inspection section with removable access panel NM rated disconnect switch Mounting rails Shaft seal Inlet bell ecorative or protective powder coating ontinuous uty High Temperature UL/cUL Listed Power Ventilators Inline and eiling Fans catalog found on or
10 irflow O.. I.. TI, TI-, TI-FS imensions for TI, TI-, TI-FS TI Level 3 TI- Level 3 TI-FS Levels 3 and 4 (I) (O) () (I) (O) () L24, 3H L24, 4H L30, 3H L30, 4H L36, 3H L36, 4H L42, 3H L42, 4H ll dimensions are in inches L48, 3H L48, 4H I = Inside iameter O = Outside iameter 3L54, 3H = olt enter L54, 4H (I) (O) () 37 Inline and eiling Fans
11 V 38 rrangement 9 lass I s Optional Inlet ell Vane xial Fan irflow imensions for V UL/cUL 705 Power Ventilators V V is M Licensed for ir Performance est vailable 10 ays Optional Inlet/Outlet one ll dimensions are in inches. V elt rive Vane axial fans feature the advantages of final system balancing, motor access, manually adjustable blade pitch, economical future upgrading, and the capability to operate in airstream temperatures up to 200 F. Quick uild Performance apacities range from 2,000 to 70,000 cfm and up to 7 in. wg of static pressure. Standard onstruction Housing - continuously welded, steel ast aluminum hub and blades Straightening vanes Final assembly vibration analysis xtended lubrication lines Permatector protective powder coating Options and ccessories Motor cover Guards - inlet, outlet elt guard ompanion flanges - inlet, outlet Inlet/outlet cone Isolators Inspection section NM rated disconnect switch Inlet bell Horizontal or vertical mounting options ecorative or protective powder coating UL/cUL Listed Power Ventilators Mounting Options Horizontal ase Heavy-gauge steel support legs welded to the fan are punched to accept neoprene or spring vibration isolators. Horizontal eiling Hung rackets welded to the fan housing for horizontal ceiling hung applications are punched to accept hanging neoprene or spring isolators. Vertical ase or Suspension rackets rackets welded to the fan housing for vertical base mount or vertical ceiling hung applications are punched to accept vibration isolators. ustomer must specify one of the mounting arrangements shown below. UFM UH FM H Inline and eiling Fans catalog found on or
12 whole health. fficient air systems for sustainable hospitals Mixed Flow Fan ombination Louver/ amper Utility Fan Spun luminum Roof xhaust Packaged Ventilation System Laboratory xhaust System entrifugal Inline Fan nergy Recovery Ventilator Spun luminum Upblast xhaust Fan entrifugal Supply Fan Louvered quipment Screen Make-Up ir entrifugal Inline Fan/ Fire Smoke amper Kitchen Hood Utility istribution System Today s hospital ventilation needs are more dynamic and demanding than ever, with increased focus on energy efficiency and sustainable building design concepts. To meet complex and interrelated demands throughout a medical facility, you must equip for a wide variety of critical, specialized applications public areas, offices, surgery suites, highly sensitive equipment, patient rooms, laboratories, kitchen and cafeteria. Only an integrated HV system can provide the reliability and performance a hospital needs. Greenheck offers a comprehensive line of products, designed to work together, effectively, with energy efficiency and quiet operation, and the added benefit of simplified installation to save time and costs. We offer more products with certifications from M, UL, TL, HRI and S than any other manufacturer. nd, many Greenheck products can help attain L credits. Take a holistic and sustainable approach for your hospital project contact your Greenheck representative today. Learn more at greenheck.com/4hospital Fans & Ventilators entrifugal & Vane xial Fans nergy Recovery Ventilators Packaged Ventilation Systems Make-up ir Units Kitchen Ventilation Systems ampers Louvers Fume & Lab xhaust Systems oils greenheck.com
13 S, SS, S, SS, S, SS, S, SS 40 elt rive UL/cUL 705 Power Ventilators S1/SS1, S2/SS2, S3/SS3, S/SS, S/SS S-8 through 12, 16 and 20 S-24 through 36 ll S/SS, S/SS, S/SS, S/SS up through size 48 ll S/SS, S/SS, S/SS, S/SS sizes 54 and larger irect rive UL/cUL Listed 705 is standard on In Stock S1 and S models. S1, S2, S3, S and S are M Licensed for Sound and ir Performance est vailable In Stock 3 ays 5 ays S, SS, S, SS irect rive and S, SS, S, SS elt rive Sidewall propeller fans are designed to exhaust or supply high volumes of air from commercial and industrial buildings. Fan panels allow for electrical passage to either side of panel for easy wiring. Quick elivery / Quick uild Performance apacities range from 100 up to 87,000 cfm and 1 in. wg of static pressure. Standard onstruction irect rive S SS S SS S SS elt rive S SS Fan panel and drive frame - galvanized steel Propeller construction Stamped aluminum Level 1 Fabricated steel Level 2 Fabricated steel Fabricated steel Level 3 ast aluminum orrosion-resistance fasteners Reversible all bearing motor - 1/4 hp and larger Three speed motor (sizes 8 through 12) djustable motor pulley Options and ccessories Stock S SS S SS S SS S SS Vari-Green motor - 80% turndown, 85% efficient vailable as standard on select sizes ampers Wall housing - up through size 24 Wall collar - Stock up through size 36 Weatherhood 45 - up through size 24 and size 36 Weatherhood 90 - up through size 16 and size 24 Motor side guard - size 20 through 30 OSH motor side guard - size 16 Louver/Fire damper - size 20 through 42 amper guard Horizontal mounting Wiring - pigtails Lube lines Filters - 2 inch aluminum, washable - supply only NM rated disconnect switch ual drives Relubricatable bearings OSHP rated ecorative or protective powder coating UL/cUL Listed Power Ventilators Select sizes and models with the Vari-Green motor are available in stock. Sidewall xhaust Fans catalog found on or
14 irect rive s: S, SS, S, SS Level 1: s 8-12 Level 1: s Level 2: s Level 3: s * * xhaust irflow * * F* Supply irflow F* imensions for irect rive Fan Panel irflow xhaust Supply Sq. Flange * * F* ll dimensions are in inches. *Varies with motor selection. 41 S, SS, S, SS, S, SS, S, SS xhaust irflow Supply irflow elt rive s: S, SS, S, SS Level 1: s Level 2: s Level 3: s * F* * Level 3: s xhaust irflow * * Supply irflow F* imensions for elt rive Fan Panel xhaust Supply Sq. Flange Levels Level ll Levels Level 1 and 2 3 Levels 1 and 2 3 * * * * F* F* ll dimensions are in inches. * Varies with motor selection. xhaust irflow Supply irflow Sidewall xhaust Fans
15 Options and ccessories for Sidewall Propeller Fans Options and ccessories for Sidewall Propeller Fans Wall Housing Wall ollar ++ 90º Weatherhood Motor Side Guards 45º Weatherhood G 42 F Motor Side Guard epth OSH Motor Side Guard epth amper Guard epth Optional irect rive onfiguration Optional elt rive onfiguration imensions Wall Housing & ollars Weatherhood Motor Side OSH Motor amper Wall amper Square Length Guard Side Guard Guard Opening* Width ++ F G epth epth Square epth ll dimensions are in inches. *Opening is for fan and accessories to fit. ++Indicates short wall housing dimension. dd 6 inches for long wall housing. dd 10 inches for louver/fire damper. Sidewall xhaust Fans
16 F irect rive ement block fans are designed for economy and reliability in small size, high volume applications. fficient propeller, venturi, and motor design results in low sound levels with minimal restriction to airflow. Works great for ventilating equipment rooms, plumbing and electrical chases. Quick elivery Performance apacities range from 300 to 500 cfm and 0.4 in. wg of static pressure. F est vailable In Stock Standard onstruction Housing - galvanized steel Fits in place of a standard 16 by 8 inch concrete block Mountable in any wall construction Mounting flanges for easy installation Grille - galvanized steel UL/cUL Recognized motor 10.5 irflow ll dimensions are in inches. catalog found on or Sidewall xhaust Fans
Inline, Ceiling and Sidewall Exhaust
SP, SP 38 Inline, eiling and Sidewall xhaust SP SP UL/cUL 507-33599 - eiling xhaust Fans SP-390 and smaller and SP- are UL/cUL Listed for above bathtub/shower with GFI branch protected circuit. SP- is
More informationRoof & Sidewall Mounted
G, G Roof & Sidewall Mounted 4 E40001 - G and G UL/cUL Power Ventilators for Smoke ontrol Systems MH11711 - G UL/cUL Listed 705 is standard on In Stock models G and G are M Licensed for Sound and ir Performance
More informationV-1 Product Catalog. Your Ventilation Company
V-1 Product atalog Your Ventilation ompany ontents Pages 4-37 GRVITY VNTILTORS Page 38 MOTOR STRTRS Page 40 MPRS Pages 41-43 LOUVRS Pages 44-45 WLOM TO VNO INTROUTION OUT US Venco is a North merican ventilation
More informationMixed Flow Inline Fan Model EQB
Mixed Flow Inline Fan Model QB Belt Drive High efficiency lower cost June 215 Model QB Mixed Flow Inline Fan QB mixed flow inline fans are designed to efficiently exhaust, supply, or recirculate general
More informationCentrifugal Inline Fans
Centrifugal Inline Fans Models SQ-M and SQ-M Direct and elt Drive UILDING VLUE IN IR. February January 2018 2017 Models SQ-M & SQ-M Centrifugal Square Inline Duct Fans Designed for indoor and outdoor clean
More informationTubular Centrifugal Fans
Tubular Centrifugal Fans Model TCB Inline - Horizontal or Vertical Roof Upblast and Roof Supply March 2007 Tubular Centrifugal Fans The TCB series of inline centrifugal fans is designed for ducted inline,
More informationCentrifugal Inline Fans Models SQ-M and BSQ-M. Direct and Belt Drive
Centrifugal Inline s Models SQ-M and BSQ-M Direct and Belt Drive July 2010 Centrifugal Inline Duct s Greenheck's model SQ-M and BSQ-M centrifugal square inline fans feature a unique combination of installation
More informationTube Axial Inline Fans
Tube Axial Inline Fans Models TDI & TBI-CA Level 3 with Cast Aluminum Propeller Direct & Belt Drive Clean Air or Fume Exhaust July 2011 Features Tube Axial Inline Fans Greenheck s tube axial fans are the
More informationInline Fans [ 14 ] * UL is optional and must be specified.
XTIF, XIB and XID models are listed for electrical (UL/C-UL US 705) File no. E40001. Model XTIF is available with the UL 762 Listing (Power Ventilators for Restaurant Exhaust Appliances). Accurex, LLC
More informationCommercial & Industrial Ventilation Complete Line of Sustainable Products
ommercia l Kitchen Ventilation ommercial & Industrial Ventilation omplete Line of Sustainable Products 919.88.4 800.334.956 919.88.504 (fax) www.captiveaire.com ontents entrifugal Upblast xhaust Fans N-F
More informationMixed Flow Inline Fan Model EQB
Mixed Flow Inline Fan Model EQB Belt Drive High efficiency lower cost May 2014 Model EQB Mixed Flow Inline Fan EQB mixed flow inline fans are designed to efficiently exhaust, supply, or recirculate general
More informationFirst Inline fan in the industry to be UL/cUL Listed Power Ventilator for Smoke Control Systems
Medium Pressure Axial Fans Model TBI-FS Levels 3, 4 & 5 with Fabricated Steel Propeller Belt Drive Inline or Roof Mounted Upblast Clean Air or Fume Exhaust High Temperature Process Exhaust Emergency Smoke
More informationCentrifugal Cabinet Fans Model BCF. Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile November 204 BCF Centrifugal Cabinet Contents Standard Construction Features... 3 Options and Accessories... 4 Filter and Mixing Box Data... 5 Typical Installations...
More informationHigh Performance Axial Fans
High Performance Axial Fans Model AX High Efficiencies Low Sound July 2014 High Performance Axial Fans Greenheck s High Performance Axials, Model AX, are direct driven axials designed for inline air ventilation
More informationCentrifugal Cabinet Fans Model BCF Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile May 2007 BCF Belt Drive Cabinet s Greenheck belt drive low-profile cabinet fans, BCF, are designed for efficiency and reliability in supply, exhaust or
More informationCentrifugal Utility Fans - SFD/SFB
C H F D B G E A Centrifugal Utility Fans - SFD/SFB SFB STANDARD CONSTRUCTION FEATURES HOUSING: Heavy gauge steel housing with Lock-seam construction Unit support angles with prepunched mounting holes Adjustable
More informationCentrifugal Cabinet Fans Model BDF. Belt Drive Duct Fan
Centrifugal Cabinet s BDF Belt Drive Duct July 007 BDF Belt Drive Duct s Greenheck s Belt Drive Duct s, BDF, provide the industry s best performance and durability. BDF is carefully engineered for efficiency
More informationGreenheck Quick Delivery
Greenheck Quick Delivery Greenheck Quick Delivery Stock & Quick uild Catalog Volume 25 Stock & Quick uild Catalog This catalog is being sent to you on behalf of: Volume 25 Roof & Sidewall Mounted G and
More informationMixed-Flow Blowers Page Specifications and Dimension Data Performance Data Sound Data
Mixed-Flow Blowers Page Introduction.......................................... 2-4 Standard Construction Features.......................... 5-7 Mixed-Flow Advantages.................................. 8
More informationVane Axial Fans Models VAB and VAD. Belt and Direct Drive
Vane Axial Fans Models VAB and VAD Belt and Direct Drive July 2008 XX High Performance Vane Axial Fans Greenheck vane axial fans are designed for commercial and industrial applications where large volumes
More informationGreenheck Product Category
reenheck Product ategory SW elt rive ackward nclined une 008 SW elt rive Utility ans reenheck s backward inclined utility fans have many advantages; higher operating efficiencies, non overloading horsepower
More informationVANEAXIAL & TUBEAXIAL FANS
BULLETIN 482 July 2008 VANEAXIAL & TUBEAXIAL FANS Type "S" Belt Driven Featuring Welded Steel Propellers Models VSBD & TSBD Model TSBD Belt Driven Tubeaxial Type "S" Vaneaxial & Tubeaxial Fans For applications
More informationRoof Upblast and Sidewall Exhaust
XRUB, XRUD, XSEB, XSED, and XRUBS models are listed for electrical (UL/C-UL US 0) File no. E000 and for grease removal (UL/C-UL US ) File no. MH. Accurex, LLC certifies model XRUB, XRUD, XSEB, XSED, and
More informationCENTRIFUGAL UPBLAST ROOF EXHAUSTERS Model VRBK
CENTRIFUGAL UPBLAST ROOF EXHAUSTERS Model VRBK CENTRIFUGAL UPBLAST ROOF EXHAUSTERS COMMERCIAL KITCHEN APPLICATIONS Belt Driven Model VRBK DESIGNED AND ENGINEERED TO MEET INDUSTRY NEEDS The Carnes Company
More informationMIN/MAX PERFORMANCE IN INCHES WG
Fans Roof Exhaust Direct Drive - G Model G Centrifugal Roof Exhaust fans are direct drive. These fans are specifically designed for roof mounted applications exhausting relatively clean air. Fan wheels
More informationHybrid Fans. Models QEI and QEID. Belt and Direct Drive
Hybrid Fans Models QEI and QEID Belt and Direct Drive March 9 Quiet, Efficient, Inline Greenheck, the world s largest manufacturer of air movement and control products, has been providing top quality ventilation
More informationTUBULAR CENTRIFUGAL INLINE FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS TUBULAR CENTRIFUGAL INLINE FANS MODEL TSL CATALOG 1001 APRIL 2014 CENTRIFUGAL INLINE FANS Model TSL The TSL is an inline centrifugal
More informationMODELS LCE/LCS, L2E/L2S, L3E/L3S
ELT DRIVE SIDEWLL PROPELLER FNS LINE OVERVIEW Jenco s elt Drive Sidewall Propeller line is designed to exhaust or supply large volumes of air at relatively low static pressures. With 3 levels of construction,
More informationRoof Upblast and Sidewall Exhaust
XRUB, XRUD, XSEB, XSED, and XRUBS models are listed for electrical (UL/C-UL US 705) File no. E40001 and for grease removal (UL/C-UL US 762) File no. MH11745. Accurex, LLC certifies model XRUB, XRUD, XSEB,
More informationSidewall Propeller Fans Direct Drive. Exhaust / Supply
Sidewall Propeller Fans Direct Drive / February 2009 Sidewall Propeller Fans Greenheck s sidewall propeller fan line is the ideal choice for factory and warehouse applications where high volumes of air
More informationReliable Ventilation Solutions
Reliable Ventilation Solutions Residential ommercial Industrial 2017 Product atalog Pages 4 17 Residential Global Manufacturing and Operations t Kamfri, we re committed to providing the products you need,
More informationWholesale Ventilation Products
Wholesale Ventilation Products... better AIRFLOW by ESIGN! RM IRECT RIVE AXIAL EXHAUST FANS RM Axial Exhaust Fans are suitable for roof or wall mounting in commercial ventilation applications. They are
More informationCentrifugal Exhaust Fans Series C. Roof Upblast and Sidewall
Centrifugal Exhaust s Series C Roof Upblast and Sidewall April 28 Series C - Spun Aluminum Roof Upblast and Sidewall Centrifugal Exhaust s When you buy a Greenheck Series C model, you receive a fan with
More informationMODEL TXD DIRECT DRIVE CENTRIFUGAL UPBLAST ROOF EXHAUSTER
MEL TXD Model Features Exhaust air up to 3,400 CFM in high static pressure applications up to 1-1/4 w.g. Attractive spun aluminum exterior Direct drive units have low sound levels and quiet operation Non-overloading
More informationCentrifugal Inline Fans Models SQ and BSQ Direct and Belt Drive
Centrifugal Inline s Models SQ and BSQ Direct and Belt Drive May 21 Models SQ and BSQ Centrifugal Square Inline Duct s Table of Contents Standard Construction Features...4-5 Vari-Green Motor & Control
More informationTubular Centrifugal Inline Fans Page Introduction... 2 Construction Features... 3 Specification and Dimension Data TCN-D (Inline Fan- Direct
Tubular Centrifugal Inline Fans Page Introduction........................................... 2 Construction Features.................................. 3 Specification and Dimension Data TCN-D (Inline Fan-
More informationMODEL TXD DIRECT DRIVE CENTRIFUGAL UPBLAST ROOF EXHAUSTER
MEL TXD MEL FEATURES Exhaust air up to 3,400 CFM in high static pressure applications up to 1-1/4 w.g. Attractive spun aluminum exterior Direct drive units have low sound levels and quiet operation Non-overloading
More informationAMCA Seal Assures rating of Sound and Air performance. 2 year fan housing warranty, 1 year motor warranty
MODEL FEATURES Exhaust air up to 2,800 CFM in high static pressure applications up to 1 w.g. Direct drive units have low sound levels and quiet operation Ideal for applications where space is limited Non-overloading
More informationCENTRIFUGAL UPBLAST ROOF EXHAUSTERS Models VUDK and VUBK
CENTRIFUGAL UPBLAST ROOF EXHAUSTERS Models VUDK and VUBK CENTRIFUGAL UPBLAST ROOF EXHAUSTERS Direct and Belt Driven Models VUDK and VUBK DESIGNED AND ENGINEERED TO MEET INDUSTRY NEEDS The Carnes Company
More informationFixed Pitch Vane Axial Fan
Fixed Pitch Vane Axial Fan Page Introduction...........................................2 Construction Features...................................3 Mounting Options.......................................3
More informationEcoWatt Products. Advancing Ventilation
EcoWatt Products Advancing Ventilation EcoWatt-0817 August 2017 What is EcoWatt At S&P we strive to engineer and manufacture the most efficient products in the market. In order to categorize our most energy
More informationCentrifugal Roof Supply Fans Models RSF and RSFP. Forward Curved
Centrifugal Roof Supply Fans Models and Forward Curved April 2008 Centrifugal Filtered Roof Supply Fan When you buy a Greenheck model or, you receive a fan with the industry s best performance and durability
More informationDirect Gas-Fired Heating
Direct Gas-Fired Heating Model DG 800 to 15,000 cfm Up to 1,600,000 BTU/hr Optional Evaporative Cooling January 2005 PRODUCT FEATURES Model DG Direct Gas-Fired Make-Up Air Unit The Greenheck model DG is
More informationCentrifugal Roof Supply Fans Models RSF and RSFP. Forward Curved
Centrifugal Roof Supply Fans Models and Forward Curved B U I L D I N G V A L U E I N A I R. April 2008 Centrifugal Filtered Roof Supply Fan When you buy a Greenheck model or, you receive a fan with the
More informationEnergy Recovery Laboratory Exhaust
Energy Recovery Laboratory Exhaust Model Vektor ERS-M For Vektor-M Fan Systems September 2012 Model Page Header Vektor ERS-M Greenheck s Vektor -ERS is a pre-engineered laboratory exhaust energy recovery
More informationMODELS STXD & STXDe DIRECT DRIVE CENTRIFUGAL ROOF EXHAUSTERS
MODELS & e DIRECT DRIVE CENTRIFUGAL ROOF EXHAUSTERS MODEL DIRECT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES Exhaust air up to 4,780 CFM in high static pressure applications up to 1-1/2 w.g. Attractive
More informationDESIGN GUIDELINES FANS PAGE 1 of 7
DESIGN GUIDELINES FANS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification to the
More informationSECTION AXIAL HVAC FANS
SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationEnergy Recovery Laboratory Exhaust
Energy Recovery Laboratory Exhaust Model Vektor -ERS For Vektor-M, MH and MS Systems January 2018 Model Vektor -ERS Greenheck s Vektor -ERS is a pre-engineered laboratory exhaust energy recovery system.
More informationQMXTubular Mixed Flow Product Guide 1
QMXTubular Mixed Flow Product Guide 1 INTRODUCTION QMX has a wide range of benefits. These features make QMX your ideal solution when low sound, high efficiency or compact size are required. DESIGNED FOR
More informationKITCHEN VENTILATION SOLUTIONS
KITHN VNTILTION SOLUTIONS HOO LINRS XHUST NS SILNRS IMPROVING INOOR IR QULITY THROUGH TTR VNTILTION June 0 SK00 www.fantech.net KITHN VNTILTION SOLUTIONS Today s kitchens have become much more than a place
More informationAmericraft is dedicated to assist you, our customer, in all aspects of your air moving requirements.
mericraft Manufacturing Company Inc. has been manufacturing quality industrial fans and ventilation products since 1946. Our 50+ years of proven experience, strong national reputation and excellent customer
More informationBULLETIN 456. July 1997 VANEAXIAL FANS. Type W Direct Drive/Belt Driven. Model VW Direct Drive. Model VWBD Belt Driven
BULLETIN 456 July 1997 VANEAXIAL FANS Type W Direct Drive/Belt Driven Model VW Direct Drive Model VWBD Belt Driven Aerovent certifies that the Type W Vaneaxial Fans shown herein are licensed to bear the
More informationCONSTRUCTION FEATURES AND OPTIONS
MODEL SQD & esqd MODEL FEATURES Exhaust air up to 2,8 CFM in high static pressure applications up to 1 w.g. Direct drive units have low sound levels and quiet operation Ideal for applications where space
More informationCeiling and Inline Fans
Ceiling and Inline Fans Page Introduction.....................................2 Construction Features..............................3 Specifications and Dimension Data GC 122-184....................................4
More informationforward curved inline duct blowers
Defining Innovation. forward curved inline duct blowers TYPE DBS (Single) DBT (Twin) BULLETIN 4220 January 2011 Duct Blowers General Information Twin City Fan s belt driven DBS (single) and DBT (twin)
More informationInline and Roof Mounted Fans
CV Inline and Roof Mounted Fans Page Introduction........................................... 2 Construction Features................................. 3-4 Specifications and Dimension Data CVD (Direct Drive
More informationAir Moving Solutions. low pressure mixed flow fans. QCLB QCLBR (Restaurant) QCLBSH (Smoke & Heat)
Air Moving Solutions. low pressure mixed flow fans QCLB QCLBR (Restaurant) QCLBSH (Smoke & Heat) BULLETIN 1070 February 2012 MixedFlowFans Models QCLB QCLBR QCLBSH Benefits of Mixed Flow Fans Twin City
More informationMODEL CTB TUBULAR CENTRIFUGAL INLINE BELT DRIVEN FAN
MODEL FEATURES Rated up to 20,000 CFM in static pressure applications up to 2-1/2 w.g. Motor drives are located outside of the airstream Ideal for applications where space is limited Belt drives permit
More informationTurning Air Into Solutions. AXIFAN VANEAXIAL & TUBEAXIAL FANS TCVS/TCTS TCVSSH/TCTSSH
Turning ir Into Solutions. XIFN VNEXIL & TUBEXIL FNS TCVS/TCTS TCVSSH/TCTSSH CTLOG X250 May 2012 Vaneaxial&TubeaxialFans Models TCVS I TCTS I TCVSSH I TCTSSH For applications requiring extensive corrosion
More informationUTILITY BLOWERS. Models: BIUB / BIUBR / BIUBSH BAUB / DFC / FCUB. The Industrial Choice.
UTILITY BLOWERS Models: BIUB / BIUBR / BIUBSH BAUB / DFC / FCUB The Industrial Choice. CATALOG 760 April 2017 Utility Blowers Overview Utility Blowers Aerovent s line of utility blowers is one of the most
More informationLOW PRESSURE MIXED FLOW FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS LOW PRESSURE MIXED FLOW FANS QCLB QCLBR QCLBSH CATALOG 1070 JANUARY 2017 MIXED FLOW FANS Models QCLB QCLBR QCLBSH QCLB (Horizontal) Benefits
More informationCENTRIFUGAL WALL EXHAUSTERS Models VWDK and VWBK
CENTRIFUGAL WALL EXHAUSTERS Models VWDK and VWBK CENTRIFUGAL WALL EXHAUSTERS Direct and Belt Driven Models VWDK and VWBK DESIGNED AND ENGINEERED TO MEET INDUSTRY NEEDS The Carnes Company centrifugal wall
More informationMODELS GED/GSD, eged/egsd, DFE/DFS, DDE/DDS
LINE OVERVIEW Jenco s Direct Drive Sidewall Propeller line is designed to exhaust or supply large volumes of air at relatively low static pressures. With 3 types of construction, the direct drive models
More informationMancoolers Models MCY, MCB, MCP
Mancoolers s MCY, MCB, MCP October 2007 Mancoolers Greenheck MC Mancooler fans are direct drive, tube axial fans designed for applications where localized air direction and circulation are required. Mancoolers
More informationLINEA Low Discharge Roof Exhausters
LINEA Low Discharge Roof Exhausters TECHNICAL SPECIFICATIONS BULLETIN LF18 PennBarry Your Single Source for Commercial & Industrial Supply & Exhaust Fans www.pennbarry.com TABLE OF CONTENTS INTRODUCTION
More informationSQUARE INLINE CENTRIFUGAL FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS SQUARE INLINE CENTRIFUGAL FANS DSI BSI CATALOG 40 FEBRUARY 07 SQUARE INLINE CENTRIFUGAL FANS Overview DSI BSI Twin City Fan & Blower
More informationINLINE CENTRIFUGAL DUCT FANS Direct and Belt Driven Models ZIDK and ZIBK
INLINE CENTRIFUGAL DUCT FANS Direct and Belt Driven Models ZIDK and ZIBK DESIGNED AND ENGINEERED TO MEET INDUSTRY NEEDS Air Zoë Centrifugal Inline Duct fans have been developed to efficiently handle the
More informationCENTAXIAL TUBULAR CENTRIFUGAL FANS. BIA Airfoil Blade Design Direct Drive & Belt Driven Model CBD / CDD (Class I, II & III) Model CBD Belt Driven
Model CBD Belt Driven Model CDD Direct Drive CENTAXIAL TUBULAR CENTRIFUGAL FANS BIA Airfoil Blade Design Direct Drive & Belt Driven Model CBD / CDD (Class I, II & III) CATALOG 337 February 2004 Centaxial
More informationTwin City Fan & Blower
Twin City Fan & Blower BULLETIN 4810 August 2005 PROPELLER WALL S DIRECT AND BELT DRIVE TYPE WPMD/WPMB WPMD/WPMB Propeller Wall Fans Twin City Fan & Blower WPMD and WPMB Medium Duty Propeller Wall Fans
More informationThe Industrial Choice. Model AMX MIXED FLOW FANS. Model AMX (Standard) Model AMXR (Restaurant) Model AMXSH (Smoke & Heat)
The Industrial Choice. Model AMX MIXE FLOW FANS Model AMX (Standard) Model AMXR (Restaurant) Model AMXSH (Smoke & Heat) BULLETIN 330 July 2008 AMX Mixed Flow Fans Application Mixed flow fans are becoming
More informationMixed Flow Inline Fan, Model MFSI
Mixed Flow Inline Fan, Model MFSI TABLE OF CONTENTS 3 Introduction, Certifications & Listings 4 Features & Benefits 5 Options & Accessories 6 Dimensional Data 10 Performance Data 27 Sound Data 44 Engineering
More informationSECTION CENTRIFUGAL HVAC FANS
SECTION 233416 - CENTRIFUGAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPropeller Hooded Roof Fans
Propeller Hooded Roof Fans Series A - Model AE and AS Exhaust and Supply Fans August 8 Model AE and AS Propeller Fans Greenheck s models AE (axial exhaust) and AS (axial supply) spun aluminum direct drive
More informationPlenum Fans. Models APM and APH. Belt and Direct Drive
Plenum Fans Models PM and PH Belt and Direct Drive June 2015 Quiet & Efficient Plenum Fans Models PM and PH plenum fans are designed and engineered to provide superior performance and reliability in commercial
More informationMulti-Port Centrifugal Fans for Round Duct
Multi-Port entrifugal Fans for Round when you need to exhaust many points to one VS Series Fantech VS Series ompact, quiet and dependable Multi-unit housing makes incredible demands on ventilation. Fantech
More informationIndustry best 5 year fan housing warranty, 1 year motor warranty
MODELS & e DIRECT DRIVE CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS MODEL - DIRECT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES Exhaust air up to 4,980 CFM in high static pressure applications up to 1-1/2
More informationThe Industrial Choice. Model SCDD Direct Drive. Model SCBD Belt Driven SQUARE INLINE FANS. Direct Drive & Belt Driven Model SCDD / SCBD
The Industrial Choice. Model SCDD Direct Drive Model SCBD Belt Driven SQUARE INLINE FANS Direct Drive & Belt Driven Model SCDD / SCBD BULLETIN 40 January 007 Square Inline Centrifugal Fans General Information
More informationTUBEAXIAL PAINT SPRAY BOOTH EXHAUST FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS TUBEAXIAL PAINT SPRAY BOOTH EXHAUST S MODEL TCBS CATALOG AX220 MAY 2013 TUBEAXIAL S Model TCBS The Twin City Fan & Blower model TCBS
More informationMOUNTING ARRANGEMENT OPTIONS OVERVIEW
ELT DRIVE SIDEWLL PROPELLER FNS MOUNTING RRNGEMENT OPTIONS OVERVIEW Page Mounting rrangement Description 2-3 Housing Heavy-gauge, all galvanized G-90 steel housing provides a simple solution to installing
More informationSECTION HVAC POWER VENTILATORS
SECTION 233423 HVAC POWER VENTILATORS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationInstallation, Operation and Maintenance Manual
Part #455308 Model SWB - Series 100, 200 and 300 Models SFB and SFD Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting
More informationbelt drive utility sets vent-pak series models vp-bi & fc january 2007 vp 1.07
belt drive utility sets vent-pak series models vp-bi & fc january 2007 vp 1.07 model vp - belt drive utility set Application VENT-PAK fan wheels are the versatile, quiet, energy efficiency backward inclined
More informationBulletin VX05 VANEAXIAL FANS
Bulletin VX05 VANEAXIAL FANS Models: VXD, VXB Direct Drive and Belt Drive s VXD/VXB Introduction CERTIFIED RATINGS AMCA Certification UL Certification PennBarry certifi es that the Vaneaxial fans shown
More informationCentrifugal Fans - M41
Centrifugal Fans - M41 Models BISW and AFSW Single-Width Backward Inclined and Airfoil Wheels Commercial & Industrial Applications March 2009 Industrial Duty Centrifugal Fans Greenheck's airfoil and backward
More informationTwin City Fan & Blower
Twin City Fan & Blower BULLETIN AX100-A October 2008 AXIFAN VANEAXIAL FANS TYPE TCVA TCVA Vaneaxial Fans The heart of the TCVA AXIFAN fan lies in its wheel. Cast of high strength aluminum alloy, the one-piece
More informationZEPHYR CABINET. Single & Twin Unit Cabinet Fans. Moving Your Way BULLETIN ZC15 TABLE OF CONTENTS
ZEPHYR CABINET Single & Twin Unit Cabinet Fans Moving Your Way TABLE OF CONTENTS Introduction, Certifications & Listings, Features & Benefits 3 Options & Accessories 4 Typical Applications & Belt Drive
More informationTURNING AIR INTO SOLUTIONS. UTILITY SETS DCV BCV BCVR BCVSH BAV DDF FCV
TURNING AIR INTO SOLUTIONS. UTILITY SETS DCV BCV BCVR BCVSH BAV DDF FCV CATALOG 600 March 2017 UTILITY SETS Model DCV Overview Utility Sets Twin City Fan s line of utility ventilating sets is one of the
More informationCentrifugal Spun Aluminum Products
Centrifugal Spun Aluminum Products SDB SDBD STXB STXD Downblast & Upblast Centrifugal Roof Wall Exhausters Designed with Efficiency in Mind CSAP_0415 April 2015 Centrifugal Spun Aluminum Line Overview
More informationTube Axial Fan Page Specifications & Dimension Data Performance Data
Tube Axial Fan Page Introduction........................................... 2 Construction Features................................... 3 Information........................................... 4 Specifications
More informationVANEAXIAL FANS. DUCT FANS Capacities to 60,000 CFM Static pressures to 2 WG. TUBEAXIAL FANS Capacities to 86,000 CFM Static pressures to 3 WG
BULLETIN 671 AUGUST, 2016 VANEAXIAL FANS DUCT FANS Capacities to 60,000 Static pressures to 2 WG TUBEAXIAL FANS Capacities to 86,000 Static pressures to 3 WG Capacities to 0,000 Static pressures to 5 WG
More informationAXIFAN VANEAXIAL FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS AXIFAN VANEAXIAL FANS MODEL TCVA CATALOG AX100 JUNE 2013 VANEAXIAL FANS Model TCVA The heart of the TCVA AXIFAN fan lies in its wheel.
More informationTURNING AIR INTO SOLUTIONS. DIRECT DRIVE EXHAUST & SUPPLY PANEL FANS. Model TCPE
TURNING AIR INTO SOLUTIONS. DIRECT DRIVE EXHAUST & SUPPLY PANEL FANS Model TCPE CATALOG 4800 February 2017 PANEL FANS Overview TCPE TCPE panel fans are direct drive panel fans designed for low static pressures.
More informationHigh Performance Axial Fans
High Performance Axial Fans Model RA Standard and High Temperature High Efficiencies Low Sound January 2014 High Performance Axial Fans Greenheck s model RA, high performance, direct-driven axial fans,
More informationMODEL TDB TUBEAXIAL INLINE BELT DRIVEN DUCT FAN
TUBEAXIAL INLINE BELT RIVEN UCT FAN Model Features Rated up to 75,490 CFM in static pressure applications up to 1-1/2 w.g. 12 sizes ranging from 12 to 60 propeller diameters Motor drives are located outside
More informationIndustry best 5 year fan housing warranty, 1 year motor warranty
MEL FEATURES Exhaust air up to 28,000 CFM in high static pressure applications up to 1-1/4 w.g. Attractive spun aluminum exterior Belt drives permit easy performance adjustments when needed Non-overloading
More informationTURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS. T-Series TL-Series
TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 March 2018 CEILING & INLINE VENTILATORS Overview T I TL Twin City Fan & Blower s T-Series Ceiling and TL-Series
More informationThe Industrial Choice. Vane Section For Model VTBD. Model TTABD TUBEAXIAL & VANEAXIAL FANS. Type "T" Belt Driven Model TTABD / VTBD
The Industrial Choice. Vane Section For Model VTBD Model TTABD TUBEAXIAL & VANEAXIAL S Type "T" Belt Driven Model TTABD / VTBD BULLETIN 424-A November 1998 Model TTABD/VTBD Tubeaxial/Vaneaxial Fans Aerovent
More information& 12" 96" / TABD CATALOG
The Industrial Choice. Model TA Direct Drive Model TABD Belt Driven TUBEAXIAL S Macheta Airfoil Design Direct Drive & Belt Driven Sizes 2" through 96" Models TA / TABD CATALOG 5 August 204 Tubeaxial Fans
More informationCEILING & INLINE/CABINET VENTILATORS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 MARCH 2018 CEILING & INLINE VENTILATORS OVERVIEW T I TL T-Series
More information