Aggregate Optimization Chart
|
|
|
- Juniper Pope
- 5 years ago
- Views:
Transcription
1 Report PLANT #: P-102 Contractor: Dates Test Represents: 10//2018 through 11/5/2018 MDOT No.: Stoneco Stoneco Chelsea Total Wt <----- Verify this number is 100% 701 W. 10 Mile Rd. 2" " " /4" /2" /8" *Maximum must be above the 3/8" sieve. # *Any two adjacent sieves must equal 10% except max., # nom. max., #100 and #200 sieves. # * must be at least 4% for each sieve except max., # nom. max., #100 and #200 sieves. # * must be at least 8% for the 1" sieve when # a 2" max. size (nom. Max. 1.5") aggregate is used. LBW Batch Plant Gradations Coarseness Factor: 62 Workability Factor: Coarseness Factor: 61 %, 44 56, 67, 60, IPS 36 56, 32 67, 32 68, " " " /4" /2" /8" # # # # # # LBW
2 Report PLANT #: P-20 Contractor: Dates Test Represents: 10//2018 through 11/5/2018 MDOT No.: Presque Isle Presque Isle AA Grange Hall Total Wt <----- Verify this number is 100% 701 W. 10 Mile Rd. 2" " " /4" /2" /8" *Maximum must be above the 3/8" sieve. # *Any two adjacent sieves must equal 10% except max., # nom. max., #100 and #200 sieves. # * must be at least 4% for each sieve except max., # nom. max., #100 and #200 sieves. # * must be at least 8% for the 1" sieve when # a 2" max. size (nom. Max. 1.5") aggregate is used. LBW Batch Plant Gradations Coarseness Factor: 63 Workability Factor: 37.2 Coarseness Factor: 63 %, 44 57, 68, 60, 36 IPS 57, 32 68, 68, " " " /4" /2" /8" # # # # # # LBW
3 Report PLANT #: P-32 Contractor: Dates Test Represents: 10//2018 through 11/5/2018 MDOT No.: Presque Isle Presque Isle Smelter Bay Total Wt <----- Verify this number is 100% 701 W. 10 Mile Rd. 2" " " /4" /2" /8" *Maximum must be above the 3/8" sieve. # *Any two adjacent sieves must equal 10% except max., # nom. max., #100 and #200 sieves. # * must be at least 4% for each sieve except max., # nom. max., #100 and #200 sieves. # * must be at least 8% for the 1" sieve when # a 2" max. size (nom. Max. 1.5") aggregate is used. LBW Batch Plant Gradations Coarseness Factor: 62 Workability Factor: 37.3 Coarseness Factor: 62 %, 44 56, 67, 60, 36 IPS 56, 32 67, 32 68, " " " /4" /2" /8" # # # # # # LBW
4 Report PLANT #: P- Contractor: Dates Test Represents: 10//2018 through 11/5/2018 MDOT No.: Stoneco Stoneco Burmeister Total Wt <----- Verify this number is 100% 701 W. 10 Mile Rd. 2" " " /4" /2" /8" *Maximum must be above the 3/8" sieve. # *Any two adjacent sieves must equal 10% except max., # nom. max., #100 and #200 sieves. # * must be at least 4% for each sieve except max., # nom. max., #100 and #200 sieves. # * must be at least 8% for the 1" sieve when # a 2" max. size (nom. Max. 1.5") aggregate is used. LBW Batch Plant Gradations Coarseness Factor: 63 Workability Factor: Coarseness Factor: 61 %, 44 56, 67, 60, IPS 36 56, 31 67, 68, " " " /4" /2" /8" # # # # # # LBW
5 Report PLANT #: P-36 Contractor: Dates Test Represents: 10//2018 through 11/5/2018 MDOT No.: Presque Isle Presque Isle AA Grange Hall Total Wt <----- Verify this number is 100% 701 W. 10 Mile Rd. 2" " " /4" /2" /8" *Maximum must be above the 3/8" sieve. # *Any two adjacent sieves must equal 10% except max., # nom. max., #100 and #200 sieves. # * must be at least 4% for each sieve except max., # nom. max., #100 and #200 sieves. # * must be at least 8% for the 1" sieve when # a 2" max. size (nom. Max. 1.5") aggregate is used. LBW Batch Plant Gradations Coarseness Factor: 65 Workability Factor: 37.4 Coarseness Factor: 63 Workability Factor: %, 44 58, 60, 36 IPS 68, 58, 31 68, " " " /4" /2" /8" # # # # # # LBW
6 Report PLANT #: P-O2 Contractor: Dates Test Represents: 10//2018 through 11/5/2018 MDOT No.: Presque Isle Presque Isle AA Grange Hall Total Wt <----- Verify this number is 100% 701 W. 10 Mile Rd. 2" " " /4" /2" /8" *Maximum must be above the 3/8" sieve. # *Any two adjacent sieves must equal 10% except max., # nom. max., #100 and #200 sieves. # * must be at least 4% for each sieve except max., # nom. max., #100 and #200 sieves. # * must be at least 8% for the 1" sieve when # a 2" max. size (nom. Max. 1.5") aggregate is used. LBW Batch Plant Gradations Aggregate SupplierGradations Adjusted WF Intial Production Sample (IPS) Coarseness Factor: 65 Workability Factor: 37.4 Coarseness Factor: 63 Workability Factor: %, 44 58, 39 60, 36 IPS 68, 39 58, 31 68, " " " /4" /2" /8" # # # # # # LBW
Aggregate Optimization Chart
PLANT #: P-101 Contractor: 71-47 Presque Isle 950 5.81 2.62.9 71-47 Presque Isle 875 5. 2.62 28.5 75-051 Mid-Michigan 10 7.53 2.66.7 Total Wt 75 18.69
DMS-9202 Asphaltic Concrete Patching Material (Stockpile Storage or Bagged)
Asphaltic Concrete Patching Material (Stockpile Storage or Bagged) Effective Date: May 2017 1. DESCRIPTION This Specification governs for crushed stone asphaltic concrete intended primarily as a cool-
DMS ASPHALTIC CONCRETE PATCHING MATERIAL (STOCKPILE STORAGE)
DMS - 9202 (STOCKPILE STORAGE) EFFECTIVE DATES: AUGUST 2004 APRIL 2010. 9202.1. Description. This Specification governs for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile
All Regional Engineers. Omer M. Osman, P.E. Special Provision for Hot-Mix Asphalt Mixture Design Composition and Volumetric Requirements July 25, 2014
All Regional Engineers Omer M. Osman, P.E. Special Provision for Hot-Mix Asphalt Mixture Design Composition and Volumetric Requirements July 25, 2014 This special provision was developed by the Bureau
DMS-9203, Asphaltic Concrete Patching Material (Containerized)
Overview Effective Date: July 1999 July 2004 This specification shall govern for containerized asphaltic concrete mixture intended primarily for cool to cold, wet weather repair of small pavement areas.
Section 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized)
Section 4 DMS-9203, Asphaltic Concrete Patching Overview Effective Date: August 2004 - December 2005. This Specification governs for rapid curing containerized asphaltic concrete mixture intended primarily
Innovative Warm Mix Asphalt Projects: The Contractor s Perspective
Innovative Warm Mix Asphalt Projects: The Contractor s Perspective NESMEA 2009 Portland, ME October 7 th 2009 ROD BIRDSALL, PE What is Warm-Mix Asphalt (WMA)? Asphalt Mix produced at 40-100ºF less than
2017 Local Roads Workshop Local Agency HMA Acceptance Specification
2017 Local Roads Workshop Local Agency HMA Acceptance March 2017 Review of Existing Spec Next Steps Construction Local Agency HMA Acceptance 1. Mix Design a. Submit Mix design and JMF to Engineer for
Mr. Gabriel Ojeda Fritz-Pak Corporation Phone: (214) Eastover Circle Fax: (214)
December 15, 2011 Mr. Gabriel Ojeda Fritz-Pak Corporation Phone: (214) 221-9494 4821 Eastover Circle Fax: (214) 341-3182 Mesquite, TX 75149 Email: gabrielojeda@fritzpak.com Subject: Final Report (Revised)
DMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage)
Overview Effective Date: July 1999 July 2004 This specification shall govern for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile patching mix for maintenance. It shall
MICHIGAN DEPARTMENT OF TRANSPORTATION DIVISION OF OPERATIONS, TRAFFIC AND SAFETY EQUIPMENT CERTIFICATION GUIDELINES - PAVEMENT MARKINGS
MICHIGAN DEPARTMENT OF TRANSPORTATION DIVISION OF OPERATIONS, TRAFFIC AND SAFETY EQUIPMENT CERTIFICATION GUIDELINES - PAVEMENT MARKINGS T&S: JGM Updated: 07/21/09 All self-propelled marking vehicles must
SULFUR EXTENDED ASPHALT INVESTIGATION - LABORATORY AND FIELD TRIAL
A5EE-151 SULFUR EXTENDED ASPHALT INVESTIGATION - LABORATORY AND FIELD TRIAL Ali Ehsan Nazarbeygi 1, Ali Reza Moeini 2 1 Bitumen and Road Construction Department, Research Institute of Petroleum Industry
Summary of Administrative Revisions to Standard Specifications 700 Series Description of Revision
Summary of Administrative Revisions to Standard Specifications 700 Series Section Description of Revision ALL Formatting in accordance with CSI standards o All Paragraphs identified by a letter Sub-paragraphs
EFFECT OF SUPERPAVE DEFINED RESTRICTED ZONE ON HOT MIX ASPHALT PERFORMANCE
IR-03-04 EFFECT OF SUPERPAVE DEFINED RESTRICTED ZONE ON HOT MIX ASPHALT PERFORMANCE by Jingna Zhang L. Allen Cooley, Jr. Graham Hurley November 2003 EFFECT OF SUPERPAVE DEFINED RESTRICTED ZONE ON HOT MIX
METHOD OF TEST FOR ABRASION OF COARSE AGGREGATE BY USE OF THE LOS ANGELES ABRASION TESTING MACHINE
STATE OF CALIFORNIA BUSINESS, TRANSPORTATION AND HOUSING AGENCY DEPARTMENT OF TRANSPORTATION DIVISION OF ENGINEERING SERVICES Transportation Laboratory 5900 Folsom Blvd. Sacramento, California 95819-4612
DIVISION III MATERIALS AGGREGATES SECTION 901 COARSE AGGREGATE
DIVISION III MATERIALS AGGREGATES SECTION 901 COARSE AGGREGATE 901-1 General. 901-1.1 Composition: Coarse aggregate shall consist of naturally occurring materials such as gravel, or resulting from the
ALBERTA TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT
ALBERTA TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT A. SCOPE This specification covers the production and supply of white and yellow paint, to be applied
APPLICATION BRIEF. Model 4730/4731 NTO New Technology Oven. June 2000
APPLICATION BRIEF Model 4730/4731 NTO New Technology Oven June 2000 Introduction The quality of asphalt concrete pavement is typically characterized by two very important factors the asphalt binder content
ALBERTA INFRASTRUCTURE AND TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC-05 SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT
ALBERTA INFRASTRUCTURE AND TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC-05 SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT A. SCOPE This specification covers the production and supply of white and yellow
NOTICE TO SUPPLIERS CITY OF KALAMA 2018 CHEMICAL PROCUREMENT
NOTICE TO SUPPLIERS CITY OF KALAMA 2018 CHEMICAL PROCUREMENT Sealed proposals will be received by the undersigned at the City of Kalama, 195 N. First Street, PO Box 1007, Kalama, Washington 98625, up to
TSB December, 2005 Page 1 of 6
Page 1 of 6 SUBJECT: APPLIES TO: CONDITION: Engine Oil Leak Cummins C8.3, ISC, ISL, ISM Certain Spartan Chassis Models Equipped with a Cummins C8.3, ISC, ISL, or ISM Engine, with a VDM (Vehicle Date of
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION
Engineering Specification Track L1-CHE-SPE-064 Ballast Supply Version: 1 Issued: October 2015 Owner: Engineering Group Approved By: Gordon Djurdjevic Track Engineering Manager PRINTOUT MAY NOT BE UP-TO-DATE;
NCAT Report EFFECT OF FRICTION AGGREGATE ON HOT MIX ASPHALT SURFACE FRICTION. By Pamela Turner Michael Heitzman
NCAT Report 13-09 EFFECT OF FRICTION AGGREGATE ON HOT MIX ASPHALT SURFACE FRICTION By Pamela Turner Michael Heitzman July 2013 EFFECT OF FRICTION AGGREGATE ON HOT MIX ASPHALT SURFACE FRICTION By Pamela
SPECIFIC GRAVITY AND WATER ABSORPTION TEST IS:2386 Part 111 ExecutiveEngineer
LAB ID: Client Nameof the Work Contractor 13.06.2013 SPECIFIC GRAVITY AND WATER ABSORPTION TEST IS:2386 Part 111 ExecutiveEngineer JobCodeNo: 194-13-000042 SampleRegestierNo: 060513-002 SampleID No: 30600-187/07
ASMI 2015 Year in Review
ASMI 2015 Year in Review Safety Share During recent firefighting operations the 2000 A SES exploded blowing the panel doors over 150 feet. One of the panel doors struck a fire truck causing damage. One
3. Operating instructions: Minor 200
1. Technical specifications 3. Operating instructions: Minor 200 Copyright 2015 by Endecotts Ltd. 13 1. Setting up Technical specifications SIEVE SHAKER MODEL: Minor 200 General Information The Minor 200
Installation Instructions: Eco SpunBay LED High Bays
Installation Instructions: Eco SpunBay LED High Bays Installation Notes & Precautions: Read all precautions, warnings, instructions contained in this document. These instructions can be used to install
ISO 5011 Test Results
ISO 5011 Test Results Certified to the ISO 5011 Air Filtration Standard Cold Air Intake Kit 05-06 Dodge/Chrysler/300C 5.7L Hemi Part Number: 75-5008 (Cotton Filter) 75-5008D (Dry Filter) ISO 5011, Second
TEST RESULTS OF GRADATION AND ATTERBERG LIMITS FOR WMM
~ Lab ID: 19.03.2013 TEST RESULTS OF GRADATION AND ATTERBERG LIMITS FOR WMM Work Order No: Type of Mix: Date of test: Bangalore South Division,BBMP,Bangalore. (east), KRIDL,Project Implementation Unit,
Managing the Maintenance of the Runway at Baghdad International Airport
Managing the Maintenance of the Runway at Baghdad International Airport Saad Issa Sarsam Professor of Transportation Engineering Head of the Department of Civil Engineering College of Engineering - University
Screening for Maximum Accuracy. Presented By: George Schlemmer
Screening for Maximum Accuracy Presented By: George Schlemmer Today s Agenda Screening to promote a safe, cost efficient operation. Value Chain Synopsis: The critical link a golf course green. Topics covered:
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
ABRASION RESISTANCE - ROTAB AS/S
ABRASION RESISTANCE - ROTAB AS/S Description/Overview Abrasion in solid materials occurs because of the rubbing of solid pieces against each other (or any mechanical component). The rubbing typically takes
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK The Old School Stillhouse Lane Bedminster BS3 4EB Contact: Dr Dimitris Xirouchakis Tel: +44 (0)117-9471000 Fax: +44 (0)117-9471004 E-Mail:
PowerCore Air Cleaners Two-Stage
Our Original PowerCore Brand is Changing! PowerCore Air Cleaners Two-Stage POWERCORE AIR CLEANERS to Section Index PSD... 30 Scavenge System Components... 38 PowerCore Air Cleaners for Cummins Engines...
Fast Track Repair Materials and Methods. 9/22/2006 International Grooving &Grinding Association 1
Fast Track Repair Materials and Methods 9/22/2006 International Grooving &Grinding Association 1 New Technology for mix designs Sequencing methodology Innovative Bidding Fast Track 9/22/2006 International
Fibre dosing Fully automatic equipment for steel- and synthetic fibres
Fibre dosing Fully automatic equipment for steel- and synthetic fibres Steel Fibre Dosing Equipment Function Power supply The fibre tray is filled with steel fibres from paperbags, boxes or big-bags. Desired
ASMI 2016 Year in Review
ASMI 2016 Year in Review ASMI 2016 in Review During the calendar year of 2016, the ASMI inspection team performed 658 health and safety inspections, which identified 438 violations of the mining code for
CENTRAL BOARD PRICES SAND & GRAVEL EFFECTIVE: JANUARY 1, 2018
CENTRAL BOARD PRICES SAND & GRAVEL All prices listed below are F.O.B. truck at our pit or quarry. We would be pleased to quote a delivered price upon request. All delivered prices are based upon tri-axle
ADDRESS PO BOX MAIN STREET 175 DRIFT ROAD 100 BILBY ROAD
RES#2018-146 CONTRACT TERM: JUNE 22,2018-JUNE 21,2019 BID RESULTS CK09MERCER2017-02 ROAD MATERIALS FOR THE COUNTY OF MERCER AND THE MERCER COUNTY COOPERATIVE CONTRACT PURCHASING SYSTEM FOR A PERIOD OF
Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004
Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004 Effective for contracts and purchase orders advertised after January 1, 2004 Revisions - Changes to the 2003 Asphalt
Super Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
TRB Webinar: Design and Production of High-Reclaimed Asphalt Pavement Mixes. May 7, 2009, 2:00 PM EDT
TRB Webinar: Design and Production of High-Reclaimed Asphalt Pavement Mixes May 7, 2009, 2:00 PM EDT Speaker information Audrey Copeland, Federal Highway Administration audrey.copeland@dot.gov Andrea Kvasnak,
Influence of Hot Mix Asphalt Macrotexture on Skid Resistance
Influence of Hot Mix Asphalt Macrotexture on Skid Resistance Prepared by: Mary Stroup-Gardiner Brandy Studdard Christopher Wagner Auburn University Civil Engineering Department 238 Harbert Auburn, Alabama
This addendum responds to initial questions submitted by vendors.
5761 Keyo Building Orono, ME 04469-5761 Main:207-581-2712 ldd/tdy:207-973-3262 www.maine.edu REQUEST FOR PROPOSALS #014-19 University of Southern Maine Snow Removal & Sanding Services RESPONSE ADDENDUM
Miniature Relay PT 2 pole 12 A, 3 pole 10 A or 4 pole 6 A DC- or AC-coil
2, 3 or 4 C/O contacts Switching performance up to 3000 VA Relay height 29 mm Cadmium-free contact material Mechanical indicator Manual test tab, optionally lockable. White marking tabs Applications Universal
Vibratory Sieve Shaker AS 300 control
General Information The analytical sieve shaker AS 300 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The
Geoscience Testing laboratory (Al Ain)
Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship
Overhead transmission lines Tension clamp
SVENSKA KRAFTNÄT T~ SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AFL, Asset Management Lines OUR REFERENCE TR05-06E DATE 2016-06-09 CONSULTÅTIONS m /j(j TECHNICAL GUIDELINE REVISION 3 Td APPROVED Overhead
X$D Ultra 841 VSS Vertical Solid Shaft Inline Motors Vertical Solid Shaft High Thrust Motors TEFC - IEEE 841 NEMA Premium
GE Power Conversion X$D Ultra 841 VSS Vertical Solid Shaft Inline Motors Vertical Solid Shaft High Thrust Motors TEFC - IEEE 841 NEMA Premium Expect more. X$D Ultra 841 VSS- Setting the standard for reliability
EXPERIMENTAL PROJECTS
EXPERIMENTAL PROJECTS LICHTWEIGHT AGCREGATE SPIIIILE TIEATIENT Report Number DEPARTMENTAL INFORMATJON EXCHANGE STATE AND DEPARTMENT PUBLIC OF HIGHWAYS TRANSPORTATION 612-1 Test Sections of H.M.A.C. (Class
Crusher Features & Benefits
Cone Crushers Crusher Features & Benefits Eccentric and thrust roller bearings create cam and lever crushing action. Large crusher feed opening yields high performance. Dynamic Adjust TM system allows
PASSING ABILITY OF SCC IMPROVED METHOD BASED ON THE P-RING
PASSING ABILITY OF SCC IMPROVED METHOD BASED ON THE P-RING K D Chan*, Leppo Concrete Sdn Bhd, Malaysia K C G Ong, National University of Singapore, Singapore C T Tam, National University of Singapore,
Class 1 Crushed rock ballast for use primarily on main line track. Class 2 Crushed rock ballast for use only on other than main line track.
PAGE 1 OF 8 PART 1 - GENERAL REQUIREMENTS 1.1 DESCRIPTION OF SPECIFICATION This document outlines the material, stockpiling, and handling specifications of ballast. It covers the supply of ballast from
MATERIAL AND EQUIPMENT STANDARD FOR ZINC-RICH EPOXY PAINT (ORGANIC ZINC-RICH) PRIMER, INTERMEDIATE AND TOP COAT (FINISH) ORIGINAL EDITION AUG.
MATERIAL AND EQUIPMENT STANDARD FOR ZINC-RICH EPOXY PAINT (ORGANIC ZINC-RICH) AS PRIMER, INTERMEDIATE AND TOP COAT (FINISH) ORIGINAL EDITION AUG. 1993 This standard specification is reviewed and updated
Crusher Features & Benefits
Cone Crushers Crusher Features & Benefits Dynamic Adjust TM system allows fast adjustments and remote control. Eccentric and thrust roller bearings create cam and lever crushing action. Large crusher feed
JRC EFFECTS OF BALLAST DEGRADATION ON PERMANENT DEFORMATION BEHAVIOR FROM LARGE-SCALE TRIAXIAL TESTS
Proceedings of the 214 Joint Rail Conference JRC214 April 2-4, 214, Colorado Springs, CO, USA JRC214-386 EFFECTS OF BALLAST DEGRADATION ON PERMANENT DEFORMATION BEHAVIOR FROM LARGE-SCALE TRIAXIAL TESTS
Gregory Svechinsky, Ilan Ishai & Jorge Sousa Second International Conference on Warm Mix Asphalt St. Louis Missouri, October 2011
Developing Warm SMA Paving Mixes Using Activated Mineral Stabilizers and Bitumen Flow Modifiers by Gregory Svechinsky, Ilan Ishai & Jorge Sousa Second International Conference on Warm Mix Asphalt St. Louis
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PAVEMENT RIDE QUALITY (IRI ACCEPTANCE CRITERIA)
MICHIGAN DEPARTMENT OF TRANSPORTATION 03SP502(P) SPECIAL PROVISION FOR PAVEMENT RIDE QUALITY (IRI ACCEPTANCE CRITERIA) C&T:TEH 1 of 8 C&T:APPR:JFS:MJE:01-28-08 FHWA:APPR:02-01-08 a. Description. Provide
Hook & Eye Turnbuckles
Hook & Eye Turnbuckles HG-225 Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 1, a shackle one size
Materials and Trackbed Design for Heavy Haul Freight Routes : Case Study. By Dr Matthew Brough
Materials and Trackbed Design for Heavy Haul Freight Routes : Case Study By Dr Matthew Brough Contents Trackbed Design : The basics Network Rail Requirements Heavy Haul Freight requirements Case Study
Section 5 Transverse Conveyors
8981 00 22 11/07 TS4plus inear Motion and Assembly Technologies Bosch Rexroth Corp. -1 Section Transverse Conveyors BS4 are designed to transfer pallets for short transport distances (e.g. between two
INTRODUCTION HISTORY. Enfocus Software - Customer Support
INTRODUCTION Address : No. 7-2, San-Hu Li, Yangmei City 32669, Taoyuan, Taiwan Date of Incorporation : January 11, 1966 Capital : NT$362 Million (US$ 11 Million) President : Ming-Yih Cheng Products: Mining
REQUEST FOR COUNCIL ACTION. List of Exhibits A. Project Plan Set B. Bolton & Menk Proposal for Engineering / Inspection Services
Item #08 - CC Agenda - 05/2/2016 [Page 1 of 5] REQUEST FOR COUNCIL ACTION : May 2, 2016 ITEM NO: 8 Department Approval: Administrator Reviewed: Agenda Section: Name Adam Edwards JML Public Works Director/
ISO 5011 Test Results
ISO 5011 Test Results Certified to the ISO 5011 Air Filtration Standard Cold Air Intake Kit 2005-08 Ford Mustang GT V8-4.6L Part Number 75-5003 ISO 5011, Second Edition Performance Testing: Inlet Air Cleaning
BACKCALCULATION OF LAYER MODULI OF GRANULAR LAYERS FOR BOTH RIGID AND FLEXIBLE PAVEMENTS. Ashvini Kumar Thottempudi
BACKCALCULATION OF LAYER MODULI OF GRANULAR LAYERS FOR BOTH RIGID AND FLEXIBLE PAVEMENTS By Ashvini Kumar Thottempudi A THESIS Submitted to Michigan State University in partial fulfillment of the requirements
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PAVEMENT RIDE QUALITY (MEAN ROUGHNESS INDEX ACCEPTANCE CRITERIA)
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PAVEMENT RIDE QUALITY (MEAN ROUGHNESS INDEX ACCEPTANCE CRITERIA) CFS:TEH 1 of 10 APPR:KPK:JFS:07-07-16 FHWA:APPR:07-15-16 a. Description. This
Raptor XL300 Cone Crushers
Raptor XL300 Cone Crushers 2 Raptor XL300 Versatility, durability, operational security... Our Raptor XL300 cone crushers deliver significantly higher production at lower costs to succeed against today
Rated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products
Pipe Restrainers series 1000G2 1000G2C Restrainers for AWWA CI OD C900/C909 PVC/PVCO Pipe with MJ or Ductile Iron Push-On Fittings (Formerly Series 9000) INFORMATION Second Generation (Gen 2) PVC Restrainers
product manual H-3860D H-3860D_man_0816 Los Angeles Abrasion Machine
product manual H-3860D H-3860D_man_0816 Los Angeles Abrasion Machine General Model H-3860D (Los Angeles Abrasion Machine) is designed to conform to ASTM C131, C535 and AASHTO T96. These methods cover
Iron Gate Feed Pump Manual
Iron Gate Feed Pump Manual Installation and Operating Instructions Iron Gate Iron Filter System Manufactured by: R.E Prescott Co., Inc. 10 Railroad Avenue Exeter, New Hampshire 03833 Phone: (603) 772 4321
Airbag Deactivation Shunt Kit Installation Instructions
DATE 12/00 S501-M01 SERVICE TECHNICAL BULLETIN Airbag Deactivation Shunt Kit Installation Instructions MODEL VIN 2000 MY-ON S-TYPE L00001-ON Issue An airbag deactivation shunt kit may be installed, at
Principles of Geotechnical Engineering 9th Edition Das SOLUTIONS MANUAL
Priniples of Geotehnial Engineering 9th Edition Das SOLUTIONS MANUAL Full download at: https://testbankreal.om/download/priniples-geotehnial-engineering-9th-editiondas-solutions-manual/ Chapter 2 2.1 C
Rutting of Caltrans Asphalt Concrete and Asphalt-Rubber Hot Mix. Under Different Wheels, Tires and Temperatures Accelerated
DRAFT Rutting of Caltrans Asphalt Concrete and Asphalt-Rubber Hot Mix Under Different Wheels, Tires and Temperatures Accelerated Pavement Testing Evaluation Report Prepared for CALIFORNIA DEPARTMENT OF
INTRODUCTION HISTORY. Enfocus Software - Customer Support
INTRODUCTION Address : No. 7-2, San-Hu Li, Yangmei City 32669, Taoyuan, Taiwan Date of Incorporation : January 11, 1966 Capital : NT$362 Million (US$ 11 Million) President : Ming-Yih Cheng Products: Mining
SERVICE SADDLES & Cambridge Brass Inc. 140 Orion Place, Cambridge, Ontario, N1R 5V1, Canada
SERVICE SADDLES & TeCK TM Repair Clamps Cambridge Brass Inc. 140 Orion Place, Cambridge, Ontario, N1R 5V1, Canada www.cambridgebrass.com 2014 Cambridge Brass Inc. FEBRUARY2014 CAMB2014 TABLE OF CONTENTS
SECTIO N 610 PAVEMENT SMO O THNESS
SECTIO N 610 PAVEMENT SMO O THNESS 610.1 Description. This work shall consist of measuring the smoothness of the final pavement surface. Smoothness shall be measured using the International Roughness Index
ITEM 585 RIDE QUALITY FOR PAVEMENT SURFACES Description. Measure and evaluate the ride quality of pavement surfaces.
ITEM 585 RIDE QUALITY FOR PAVEMENT SURFACES 585.1. Description. Measure and evaluate the ride quality of pavement surfaces. 585.2. Equipment. A. Surface Test Type A. Provide a 10-ft. straightedge. B. Surface
The INDOT Friction Testing Program: Calibration, Testing, Data Management, and Application
The INDOT Friction Testing Program: Calibration, Testing, Data Management, and Application Shuo Li, Ph.D., P.E. Transportation Research Engineer Phone: 765.463.1521 Email: sli@indot.in.gov Office of Research
METHOD OF TEST FOR DETERMINATION OF CATHODIC DISBONDMENT OF EPOXY-COATED REINFORCING BARS
Laboratory Testing Manual Date: 97 08 01 Page 1 of 5 METHOD OF TEST FOR DETERMINATION OF CATHODIC DISBONDMENT OF EPOXY-COATED REINFORCING BARS 1. SCOPE 1.1 This test method determines the resistance to
Control Drift with Redball Broadcast Hoods 3/30/2018. Redball-Hooded Sprayers Reduce Drift 2018 Season
20'' 3/30/2018 Redball-Hooded Sprayers Reduce Drift 2018 Season Control Drift with Redball Broadcast Hoods The Redball Broadcast Spray Hood was first released in 1993. In 2013 Willmar Fabrication re-launched
Overview of Warm-Mix Asphalt for Virgin and Reclaimed Asphalt Mixes
Overview of Warm-Mix Asphalt for Virgin and Reclaimed Asphalt Mixes TRB Warm Mix May 25, 2010 John Bartoszek jbartoszek@crmanagement.com Overview Payne & Dolan Inc Driving factors for Warm Mix Warm Mix
ISO 5011 Tested to Make Sure You Maximize Airflow While Still Protecting Your Engine.
Automotive & Powersports THE FACTS ABOUT YOUR INTAKE & AIR ISO 5011 Tested to Make Sure You Maximize Airflow While Still Protecting Your Engine. Part Number: 75-5075, 75-5075D Description: Performance
Otsego County Road Commission
Otsego County Road Commission William T. Holewinski, Jr., Commissioner Troy W. Huff, Commissioner David C. Matelski, Commissioner Jason T. Melancon, Manager Thomas A. Deans, Engineer Rebecca L. Jerry,
Exercise 2: Series-Opposing DC Sources
Exercise 2: Series-Opposing DC Sources EXERCISE OBJECTIVE When you have completed this exercise, you will be able to determine voltage by using series-opposing power connections. You will verify your results
Northeast Wisconsin/Upper Peninsula Separation 11/14/01. Incident Investigation Report
Northeast Wisconsin/Upper Peninsula Separation 11/14/01 Incident Investigation Report Summary Contact by a high voltage electric transmission line with a tree in northeastern Wisconsin initiated a series
OPERATING MANUAL. Gilson Porta-Screen PS-3 & PS-4
OPERATING MANUAL Gilson Porta-Screen PS-3 & PS-4 Rev: 08/10/2017 PHONE: 800-444-1508 P.O. Box 200, Lewis Center, Ohio 43035-0200 FAX: 800-255-5314 740-548-7298 E-mail: customerservice@gilsonco.com Website:
POLICY ON SPEED HUMPS
POLICY ON SPEED HUMPS PURPOSE: The purpose of this policy is to provide guidelines for the installation of speed humps along local residential streets within Miami-Dade County. POLICY: Speed humps will
ISO 5011 Tested to Make Sure You Maximize Airflow While Still Protecting Your Engine.
Automotive & Powersports THE FACTS ABOUT YOUR INTAKE & AIR ISO 5011 Tested to Make Sure You Maximize Airflow While Still Protecting Your Engine. Part Number: 75-5059, 75-5059D Description: Performance
Sieve Shaker 200mm/300mm - 8/12 inch SV003
Sieve Shaker 200mm/300mm - 8/12 inch SV003 CONTENTS Introduction Specification Installation Controls Operation Maintenance Spares and Accessories 1 Introduction The unique action of this Sieve Shaker (Fig
50TH STREET CONCEPTUAL DESIGN
NUE NUE NUE 51 AVE REET 5.49 A-A SECTION 50TH STREET - STA 0+560 1.2 33.46 19.10 8.75 1.00 3.00 3.00 1.00 CN SPUR IF NECESSARY, GRADING ON PRIVATE TO BE BUS STOP 3697 IVE IVE BUS STOP 2279 4.25 REET REMOVE
HIGH FRICTION SURFACE TREATMENT (HFST) I-57 and I-74 Interchange
HIGH FRICTION SURFACE TREATMENT (HFST) I-57 and I-74 Interchange 101 st IL Transportation and Highway Engineering (T.H.E.) Conference - February 24, 2015 Timothy J. Sheehan, P.E. Safety Design Unit Chief
Excavatable and Early Strength CLSM using High LOI Fly Ash and Limestone Screenings
2017 World of Coal Ash (WOCA) Conference in Lexington, KY - May 9-11, 2017 http://www.flyash.info/ Excavatable and Early Strength CLSM using High LOI Fly Ash and Limestone Screenings James T. Locum, M.S.,
DPS Telecom Your Partners in Network Alarm Management
DPS Telecom Your Partners in Network Alarm Management Using the Thermalogic Temp Sensor Instructions for Using the Thermalogic Temperature Sensor with a NetGuardian This document is to be used for installation
Installation Instructions: Eco Linear High Bay
Installation Instructions: Eco Linear High Bay Installation Notes & Precautions: Read all precautions, warnings, instructions contained in this document. These instructions can be used to install Eco Linear
Attachment Laboratory of Applied Spatial Analysis Southern Illinois University Edwardsville
Attachment 12.0 Laboratory of Applied Spatial Analysis Southern Illinois University Edwardsville 362 total libraries. Contains CDP s and destination libraries. Destination libraries are those that are
Ballast Vattenbyggnadssten Del 1: Krav
SVENSK STANDARD SS-EN 13383-1 Fastställd 2002-12-13 Utgåva 1 Ballast Vattenbyggnadssten Del 1: Krav Armourstone Part 1: Specification ICS 91.100.15 Språk: engelska Tryckt i januari 2003 Copyright SIS.
Section 5 Specification 5.7 Supply of Asphalt TABLE OF CONTENTS
Section 5 Specification 5.7 Supply of Asphalt TABLE OF CONTENTS 5.7 SUPPLY OF ASPHALT... 1 5.7.1 GENERAL... 1 5.7.2 MATERIALS... 1 5.7.2.1 General... 1 5.7.2.2 Delivery, Handling and Storage... 1 5.7.3
PREDICTION OF BALLAST RETURN FROM HIGH OUTPUT BALLAST CLEANERS (HOBC)
PREDICTION OF BALLAST RETURN FROM HIGH OUTPUT BALLAST CLEANERS (HOBC) Dr W.L. Lim, Dr M. Brough & S. Middleton Scott Wilson Pavement Engineering 10 Faraday Building Nottingham Science & Technology Park
Lane Closure Manual. Route Report Index: US12-A US12-03 (WB) US12-01 (EB WB) US12-02 (EB)
Route Report Index: US1-A?A@ 15 %&'( 94?A@ 5?A@?A@ 95 +, 16 9?A@?A@ 47 %&'( 95 5?A@ 65 +, 8 +, 1 5 %&'( 94 %&'( 69 4 %&'( 5 W %&'( 5 E +, 61?A@ 95 %&'( %&'( 69 4 9 4 %&'( 94 %&'( 49 4 NOTE: Lane closures