B NPT. Dimensions Inches/millimeters
|
|
- Chrystal Bradford
- 5 years ago
- Views:
Transcription
1 R IPS CARON ST PIP GROOVD ACCSSORIS Series 731-G Suction Diffuser VICTAUIC IS AN ISO 9001 CRTIFID COMPANY PRODUCT DSCRIPTION Victaulic Series 731-G Suction Diffuser provides optimum flow conditions at the inlet side of the pump. ach suction diffuser is provided with a removable strainer and a fine mesh sleeve which acts as a startup strainer. Pipe support bosses are provided to aid in proper alignment. For convenience, bosses (tapped 1 / "/15 mm NPT) on either side are provided for pressure measurement. A plug is also provided to allow for easy draining of the system. Victaulic Series 731-G is rated at 300 psi (065 kpa) working pressure. ANSI DIMNSIONS 1 ¹ ₂" ANSI Page 1 DIN Page 3 JIS Page 5 WARNING Always depressurize and drain system before disassembly. Failure to do so could result in serious personal injury, property damage, joint leakage or joint separation. NPT 3" 6" Sizes 8" 16" Sizes Series 731-G with ANSI Class 150 Flange SIZ Side Grvd. ANSI CASS 150 Inches/millimeters Nominal Inches/mm 1 * H 1 H NPT , ,8 1 / , , , / ,0 5 16, ,1 5 16, ,5 5 16, ¹ ₄ , , ¹ ₄ , , ¹ ₄ , ¹ ₄ , , ¹ ₄ , ,9 Series 731 two-piece body. See page 7. 8/19.1mm 1 ¹ ₂" DISCONTINUD PRODUCT NPT ach bs./kg. RGISTRD TRADMARK OF VICTAUIC COPYRIGHT 003 VICTAUIC PRINTD IN U.S.A. 334 RV Victaulic Company of America Phone: PICK-VIC ( ) Fax: pickvic@victaulic.com Victaulic Company of Canada Phone: Fax: viccanada@victaulic.com Victaulic urope Phone: Fax: viceuro@victaulic.be Victaulic America atina Phone: Fax: vical@victaulic.com Victaulic Asia Pacific Phone: Fax: vicap@victaulic.com
2 1 1 ¹ ₂" 8/19.1mm ¹ ₂" Series 731-G with ANSI Class 150 Flange Side Grvd. SIZ ANSI CASS 150 3" 6" Sizes Inches/millimeters Nominal Inches/mm 1 * H 1 H NPT ¹ ₄ , ¹ ₄ , , ¹ ₄ , , ¹ ₄ , , ¹ ₄ , , ¹ ₄ , , , ¹ ₄ , , , ¹ ₄ , , , ¹ ₄ , , ¹ ₄ , , ¹ ₄ , , ¹ ₂ , , ¹ ₂ , , ¹ ₂ , , ¹ ₂ , , Series 731 two-piece body. See page 7. NPT 8" 16" Sizes NPT ach bs./kg. DISCONTINUD PRODUCT Series 731-G Suction Diffuser
3 DIN DIMNSIONS 1 1 8/19.1mm mm Sizes Series 731-G with PN10 Flange Side Grvd. SIZ PN10 millimeters/inches millimeters/inches 1 * H 1 H SPT , ,8 DN DN65 ach kg/bs , , , DN ,5 5 16,1 DN , , DN , ¹ ₄ DN , ¹ ₄ , ¹ ₄ , ¹ ₄ DN , ¹ ₄ , , ¹ ₄ DN ,7 DN ¹ ₄ DN , , ¹ ₄ , ¹ ₄ DN50 561, , , ¹ ₄ DN00 DN50 561, , ¹ ₄ , , , ¹ ₄ DN ,7 DN ¹ ₄ DN50 DN , , ¹ ₄ , , ¹ ₄ DN , ,7 DN ¹ ₂ DN300 DN , , ¹ ₂ , , ¹ ₂ DN400 DN DN350 DN400 Series 731 two-piece body. See page 7. (SPT) , , ¹ ₂ DN00 DN400 mm Sizes DISCONTINUD PRODUCT (SPT) Series 731-G Suction Diffuser 3
4 DIN DIMNSIONS 1 1 8/19.1mm Series 731-G with PN16 Flange Side Grvd. SIZ PN16 millimeters/inches millimeters Inches 1 * H 1 H SPT , ,8 DN DN65 4 Series 731-G Suction Diffuser ach kg/bs , , , DN ,5 5 16,1 DN , , DN , ¹ ₄ DN , ¹ ₄ , ¹ ₄ , ¹ ₄ DN , ¹ ₄ , , ¹ ₄ DN ,7 DN ¹ ₄ DN , , ¹ ₄ , ¹ ₄ DN50 561, , , ¹ ₄ DN00 DN50 561, , ¹ ₄ , , , ¹ ₄ DN ,7 DN ¹ ₄ DN50 DN , , ¹ ₄ , , ¹ ₄ DN , ,7 DN ¹ ₂ DN300 DN , , ¹ ₂ , , ¹ ₂ DN400 DN DN350 DN400 Series 731 two-piece body. See page 7. mm Sizes (SPT) , , ¹ ₂ DN00 DN400 mm Sizes DISCONTINUD PRODUCT (SPT)
5 JIS DIMNSIONS 1 1 8/19.1mm Series 731-G with JIS 10K Flange Side Grvd. SIZ 10K A 165,1 mm Sizes millimeters/inches millimeters 1 * H 1 H SPT A 50A , , A , , A , , A 50A 65A ,5 5 16, A ,5 5 16, A , ,7 100A , ¹ ₄ A , ¹ ₄ ,1 100A ¹ ₄ A ¹ ₄ A ¹ ₄ ,3 150A , ¹ ₄ A , ¹ ₄ ,4 00A 561, , ¹ ₄ A 561, , ,87 1¹ ₄ ,5 50A , ¹ ₄ A , , ¹ ₄ DN350A 50A , , ¹ ₂ A , ¹ ₂ A , ¹ ₂ DN400A 300A 350A , , ¹ ₂ A (SPT) 16,3 DN400A mm Sizes DISCONTINUD PRODUCT (SPT) ach kg/bs. Series 731-G Suction Diffuser 5
6 JIS DIMNSIONS 1 1 8/19.1mm Series 731-G with JIS 0K Flange Side Grvd. SIZ 10K A 165,1 mm Sizes millimeters/inches millimeters 1 * H 1 H SPT A 50A , , A , , A , , A 50A 65A ,5 5 16, A ,0 5 16, A ,5 5 16, ,7 100A , , ¹ ₄ A , , ¹ ₄ ,1 100A , ¹ ₄ A , ¹ ₄ A ¹ ₄ ,3 150A , , ¹ ₄ A , ¹ ₄ ,4 00A 561, , ¹ ₄ A 561, , ¹ ₄ ,5 50A , ¹ ₄ A , ¹ ₄ DN350A 50A , , ¹ ₂ A , ¹ ₂ A , ¹ ₂ DN400A 300A 350A , ¹ ₂ A (SPT) DN00A DN400A mm Sizes (SPT) ach kg/bs. DISCONTINUD PRODUCT 6 Series 731-G Suction Diffuser
7 ANSI DIMNSIONS Series 731 Two-Piece Suction Diffuser C - SIZ Side Grvd. Inches/millimeters Nominal Inches Actual mm C - C - O OA OAH OAW Series 731 with ANSI Class 150 Flange DIN DIMNSIONS Series 731 Two-Piece Suction Diffuser C - O ach bs./kg , , ,5 NOT: Series 731 two piece body utilizes 3 / 16" (4,8 mm) diameter holes. C - C - O OA OAH Removable Strainer & Flow Straightener SIZ Side Grvd. millimeters/inches Actual mm Nominal Inches C - C - O OA OAH OAW ach kg/bs. Series 731 with PN10 and PN16 Flange , , , NOT: Series 731 two piece body utilizes 4,8 mm ( 3 / 16") diameter holes. OA OAH Removable Strainer & Flow Straightener DISCONTINUD PRODUCT A A OAW OAW Series 731-G Suction Diffuser 7
8 SRIS 731-G SUCTION DIFFUSR SUPPORT AND OSS OCATION A C D SIZ Inches/ mm A C D F G H J ASSMY CARANC Typical Two Places Typical Three Places * 46,5 54,5 45,0 48,0 60,0 45,5 50,5 33,0 45, ,5 66,5 45,0 48,0 85,0 56,0 61,0 33,0 45, * 75,0 84,0 60,0 63,0 100,0 75,0 87,0 46,0 69, ,0 96,0 60,0 63,0 110,0 86,0 99,0 46,0 69, * 11,0 1,0 60,0 63,0 118,6 113,0 16,0 46,0 69,0 10* ,5 148,5 60,0 63,0 154,0 141,5 154,5 46,0 69,0 1* ,0 174,0 60,0 63,0 183,0 167,0 180,0 46,0 69, ,1 193,1 65,0 68,0 10,0 188,0 01,0 46,0 69, ,5 1,5 65,0 68,0 40,0 16,5 4,5 46,0 69,0 * also apply for the equivalent JIS sizes. Nominal Diameter Inches/mm Actual Outside Diameter Inches/mm Clearance #Recommended Minimum Clearance Required to Remove Diffuser asket Inches/mm Recommended Support eg Pipe Diameter Nominal Diameter Inches/mm Actual Outside Diameter Inches/mm Clearance , / , / 4 67,4 mm , ,4 139,7 mm , , ,5 mm , ,5 165,1 mm , , , , ,3 mm ased on Schedule 40 pipe diameter. The recommended access requirements are listed in the following table. *NOT: These recommended clearances are equal to the minimum clearance, plus " (51 mm) , ,4 686 H J Recommended Support eg Pipe Diameter DISCONTINUD PRODUCT # F G 8 Series 731-G Suction Diffuser
9 MATRIA SPCIFICATIONS Housing (body, coupling, end cap): Ductile iron conforming to ASTM A-395. Coupling Gasket: (specify choice)* Standard Grade PDM PDM (Green color code). Temperature range 30 F to +30 F ( 34 C to +110 C). Recommended for cold and hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. U classified in accordance with ANSI/NSF 61 for cold +86 F (+30 C) and hot +180 F (+8 C) potable water service. NOT RCOMMNDD FOR PTROUM SRVICS. Optional - Special Order Grade T nitrile Nitrile (Orange color code). Temperature range 0 F to +180 F ( 9 C to +8 C). Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recommended for hot water services over +150 F (+66 C) or for hot dry air over +140 F (+60 C). *Services listed are General Service Recommendations only. It should be noted that there are services for which these gaskets are not recommended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a listing of services which are not recommended. Diffuser: Stainless steel, type 304, frame and perforated sheet with 5 / 3" (4 mm)# diameter holes. #Diffusers on two-piece body sizes 4 " ( mm), 16 1" ( mm) and 16 16" ( mm) have 3 / 16" (4,8 mm) diameter holes. Start-up Pre-filter: 0 mesh Stainless steel, type 304. olts/nuts: Heat treated carbon steel, track head conforming to physical properties of ASTM A-183 minimum tensile 110,000 psi ( kpa). Support: oss for support. See table above for size. (Support not supplied). DISCONTINUD PRODUCT Series 731-G Suction Diffuser 9
10 PRFORMANC DATA Pressure loss values for flow of water at 60 F (+16 C) shown below. 10 IMPRIA FOW DATA Series 731-G Pressure Drop - psi Pressure Drop - bar ,9 DN50, DN65, 3, ¹ ₂, 3 4 ¹ ₂, 3, 4 5 3, 4, 5 6 4, 5, 6 8 5, 6, JIS AND DIN FOW DATA 114,3 DN65,, Flow Rate - GPM 168,3, DN15, 141,3,, DN15 19,1 DN15,, DN , 8, 10 73,0, DN00, DN50 33,9 DN00, DN50, DN ,6 DN50, DN300, DN ,4 DN300, DN350, DN , 10, , 1, , 14, 16 Series 731-G DISCONTINUD PRODUCT psi/1 bar equals C v/k v Flow Rate - m3/hr All products shall be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. 10 Series 731-G Suction Diffuser
Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730
Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa
More informationStyle 99 Roust-A-Bout Couplings
R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings
More informationSeries 751 FireLock European Alarm Check Valve Stations
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock European Alarm Check Valve Stations Grooved X Grooved 0.0 VICTAULIC IS AN ISO 00 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic Series
More informationSeries 709 Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers
More informationSeries W709 AGS Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)
More informationSeries 758 FireLock Actuated System Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 58 FireLock Actuated System Valve With Deluge Trim Grooved X Grooved and Flanged X Grooved 30.04 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT
More informationSeries W706 AGS Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)
More informationSeries 706 Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers
More informationSeries 756 FireLock Dry System Check Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock Dry System Check Valve Grooved X Grooved and Flanged X Grooved 0.0 VICTAULIC IS AN ISO 900 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic
More informationHousing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,
More informationPressfit System for Carbon Steel Pipe
R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit
More informationHot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Style 177 QuickVic flexible coupling is installation-ready, and joins 2-8"/50-200 standard roll grooved and cut grooved steel pipe. The coupling's unique
More informationQuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS
H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More informationSEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
More informationSeries 769 FireLock NXT Deluge Valve
IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 79 FireLock NXT Deluge Valve With Deluge Trim Grooved X Grooved 30.81 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The patent-pending
More informationI-731-D/W731-D. Suction Diffuser. Important Installation Information. series 731-D and W731-D
Important Installation Information WARNING Read and understand all instructions before attempting to install, remove, adjust, or maintain any Victaulic piping products. Depressurize and drain the piping
More informationVic -300 Butterfly Valves
R IPS RON STL PIP GROOV VLVS Vic -300 utterfly Valves 08.02 VITULI IS N ISO 9001 RTII OMPNY PROUT SRIPTION Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 psi (2065 kpa).
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationLenntech Tel Fax
SEE VICTAULIC PUBLICATIO.01 FOR DETAILS Style 99 Roust-A-Bout couplings are designed with heavy housings and grips to provide a strong component for joining plain and beveled end, including Schedule steel
More informationEMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly
EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly from our suppliers. aquamine pvc piping products Victaulic
More informationStainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
More information11.02 Mechanical-T Bolted Branch Outlets
STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive
More informationModel 7706 Reducing Coupling. Deg. Axial Displacement
MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents
More informationVictaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only
Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only 2.37 1.0 PRODUCT DESCRIPTION Available Sizes 3 12"/DN80 DN300 Maimum Working Pressure Rated to the working pressure of the PN/PN16
More informationSize Inches UL ULC FM. Pipe Sch.
IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design
More informationDATA BOOKLET LSD SERIES. Suction Diffusers. Pumps Motors ISO 9001 Company. Catalogue Pumping Solution
SERIES DATA BOOKLET Suction Diffusers Pumps Motors ISO 9001 Company Catalogue 2011 Pumping Solution CONTENTS INTRODUCTION Page 3 FEATURES AND BENEFITS Page 3 DESIGN FEATURES Page 4 MATERIAL OF CONSTRUCTION
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.
More informationREQUEST PUBLICATION 18.11
* SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/
More informationStyle Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
More informationVictaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More information08.20 VIC -300 MasterSeal Butterfly Valves
CRBON STEEL PIPE - GROOVED VLVES Vic -300 MasterSeal butterfly valves are designed for pressures ranging from full vacuum to 300 psi/2065 kpa and for bi-directional, dead end services to full working pressure.
More informationSuction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3
Special Purpose Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x 20...2 Technical Data...3 Triple Duty Valve - Iron Body Style TDV 125# Flanged 2-20...4 Technical Data...5 Pressure
More informationVic -300 Butterfly Valves
R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).
More information08.12 Vic-Plug Balancing Valve
Series 377 Vic-Plug balancing valve is the only eccentric grooved end plug valve made specifically for throttling services. For 3 12"/80 300 systems, Victaulic Style 307 transition couplings are available
More informationFire Protection Price List. Piping. Systems. Solutions A FP.
Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully
More informationSJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle
SJ-300N J-04 MODEL SJ-300N BUTTERFLY VALVE The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a
More informationFireLock NXT Deluge Valve. With Deluge Trim Grooved x Grooved. System No. Submitted By Spec Sect Para Location Date Approved Date
MEA: 248-98-E CSFM: 7770-0531-117 The patent-pending Victaulic Series 769 FireLock NXT controls the water supply entry into the deluge system piping and open sprinklers. The Series 769 is a low differential,
More informationGRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Worldwide Contacts www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B0 and Model BN0 Butterfly
More informationSJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in.
SJ-N MODEL SJ-N BUTTERFLY VALVE The Model SJ-N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a -position lever
More informationGRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Worldwide Contacts www.grinnell.com GRINNELL Model B Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B Butterfly Valves provide for efficient
More informationSTAINLESS STEEL SYSTEMS
STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings
More informationModel C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap
GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloy C89836* Bismuth copper alloy per ASTM B584. Materials
More informationPARTS ORDERING INFORMATION
R RP-270FSD REPAIR PARTS FOR VE270FSD Roll Grooving Tool PARTS ORDERING INFORMATION When ordering parts the following information is necessary for the Victaulic Tool Company to promptly process the order
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationGeneral Price List Main effective MAY 13, General Price List. Main
General Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully searchable product and project databases
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationFire Protection Price List
Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully
More informationFIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationGROOVED FITTINGS FOR COPPER TUBING
GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile
More informationVictaulic Discharge CBV Vibration Isolation Pump Drop Series 383/383G
Victaulic Discharge CBV Vibration Isolation Pump Drop Series /G 2..0 PRODUCT DESCRIPTION Available Sizes 2"/ - 00 Offered in full or reduced port size (see Section.0 for details). Maimum Working Pressure
More informationBULLETIN D NOVEMBER DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 52.00-1D NOVEMBER 2016 DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A395, Grade 65-45-15, ASTM
More informationFlowCon SH mm. Adjustable Dynamic Self Balancing Valve SPECIFICATIONS
FlowCon SH 50-150mm Adjustable Dynamic Self Balancing Valve SPECIFICATIONS Pressure rating: 4000 kpa / 580 psi Temperature rating, media: -20 C to +120 C / -4 F to +248 F Material: - Diaphragm: Hydrogenated
More informationSuction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationFig B34 Carbon Steel 'T' Type or Basket Type Strainers
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
More information30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim
Actuated Valve with LPCB Approved Preaction Trim 104g/01 with: - Electric Activation with Redundant Solenoid Valve - Electric Activation with Redundant Solenoid Valve and AutoConvert Dry Trim - Double
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationINTRODUCTION. General Notes
INTRODUCTION Thank you for selecting a Shurjoint product. This manual covers the proper installation and assembly procedures for your product. To ensure the proper installation, assembly and performance
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationTypical Specifications Grooved Piping Method
R TYPICAL SPECIFICATIONS GROOVED PIPING METHOD Typical Specifications Grooved Piping Method 28.01 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY To download the electronic version of Vic-Guide Spec, please
More informationDeZURIK KSL-LA SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 52.00-1B JUNE 2015 ezuri SL-LA SLURRY NIFE GATE VALVES TECNICAL SPECIFICATIONS www.dezurik.com Materials of Construction Item escription Material A1 Body uctile Iron, ASTM A536, Grade 65-45-12
More informationVIKING. Metric Motor Speed Pumps
Metric Motor Speed Pumps VIKING Serving Applications For: Chemical Processors Grain Processors Rotating Equipment OEMs Petroleum Products And Many Others Flows: to 45 M 3 /Hr Pressures: to 17 BAR Viscosities:
More informationVictaulic Specification Power Industry
Victaulic Specification Power Industry 1.01 General: A. Section Includes: B. Submittals: C. References: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Victaulic Valves
More informationProject: Customer: Engineer: Pump Manufacturer: Drawing Submittal Package Model GPL Limited Service Full Voltage Across the Line Start Electric Pump Controller Contents: Submittal Data Sheets Dimensional
More informationPressure Independent Control Valve Applications for Building Automation, Temperature Controls, and HVAC Two-Way Chilled Water Hot Water
Rev: 08/19/2013 (ATiMX) Features Pressure Independent Control Valve Applications for Building Automation, Temperature Controls, and HVAC Two-Way Chilled Water Hot Water The Auto Touch Independent Max (ATiMX)
More informationI-799/79V Coil Components
WARNING Read and understand all instructions before attempting to install any Victaulic products. Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 23 2123 - PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSuction Guide & Flo-Trex Valve Series
Suction Guide & Flo-Trex Valve Series Pump Trim FILE NO: 6-1 DATE: August 2010 SUPERSEDES: 6-1 DATE: July 200 Series SG & FTV Suction Guides Designed for direct mounting on the suction flange of horizontal
More informationATi Max Series. Pressure Independent Control Valves 2 Way 2-1/2-6
The Auto Touch Independent Max (ATiMX) valve brings pressure independent control technology to valves up to 6 and flow rates up to 468 GPM. It is a state-of-the-art control valve combining a high quality/
More informationVICTAULIC Shouldered Solutions
VICTAULIC Shouldered Solutions With a full range of couplings, fittings and valves, Victaulic offers a complete system of products that install safer, easier and up to 10 times faster than alternative
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationGrooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
More informationFrom the world s leader in mechanical piping systems... The complete system for stainless steel piping.
From the world s leader in mechanical piping systems... The complete system for stainless steel piping. The Victaulic grooved system for stainless steel piping The Victaulic system for stainless steel
More information8L SERIES THREE SCREW PUMPS
TM 8L SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 1500 PSID (103 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 50 HZ: 960 1450 1200 1100 630M 40 250 1000 900
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
More informationAdvantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationFIG Gruvlok Flanges
Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the
More informationFIRE PROTECTION PRODUCTS
FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.
More informationHeader Manifolds - 0 Design
Header Manifolds - 0 Design Header block mounting hardware is supplied. See page 179 for itemized list. Ordering Information Specifications, descriptions, and dimensional data are subject to correction
More informationGrooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationThe applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationCHECK VALVES. MOUNTING: - flow direction marked with arrow on body; - mounting position in conformity with the technical sheet recommendation.
CHECK VALVES RR page 1 R MAIN APPLICATIONS: Transport and distribution of : - cold and hot industrial water; - saturated vapours; - petroleum products; on condition that the compatibility regarding the
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationTechnical Manual. Register 10 CONTENTS - ASG
Page: 1 Contents Register 10 CONTENTS - ASG Page Technical Data ASG-DIN...2 Technical Data ASG-ANSI...3 Material Specification ASG...4 Dimensions ASG-DIN...5 Dimensions ASG-ANSI...6 Spare Parts ASG...7
More informationWCV Series Full Pattern Wafer Check Valves 2 TO 8 PVC AND CVPC
WCV Series Full Pattern Wafer Check Valves 2 TO 8 PVC AND CVPC KEY FEATURES Robust Full Pattern Body PVC and CPVC No Special Spacers or Flanges Required High Cv Rating Equal to Metal Check Valves, Saves
More informationMueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More information