Please circle the brand to which this order applies. Please continue on additional pages if needed. Mark the page number here.

Transcription

1 LOCK CORE ORDER FORM OFS / Carolina LOCK CORE ORDER FORM FORM DETAILS If this lock core order form is not submitted with the purchase order, all units will be keyed 345T. Please note, each lock ordered consists of one (1) core and one (1) key. Please indicate the brand to which this order applies. If ordering for multiple brands, please use a different form for each brand. Lock cores are available in NICKEL [N], BRASS [BR] or BLACK [K]. Key numbers are in stock and available for shipment with the purchase order. Other key numbers will be ordered, acknowledged and shipped on a separate order with a three (3) week delivery. ORDER INFORMATION Please print legibly and fill out every applicable field below. DATE (MM/DD/ YYYY) SUBMITTED BY DEALER NAME END USER NAME PURCHASE ORDER NUMBER ACKNOWLEDGMENT NUMBER COMMENTS BRAND Please circle the brand to which this order applies. OFS CAROLINA ORDER Please continue on additional pages if needed. Mark the page number here. PAGE NUMBER TOTAL PAGES QUANTITY KEY NUMBER COLOR TAG [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] K

2 LAMINATE Quality laminate panel construction using thermally-fused laminate with 1mm PVC edge. PRIMARY WORKSURFACE 1.125" thick worksurfaces are thermally-fused laminate with a 3mm PVC edge. Primary worksurfaces are profiled on approach and user sides; secondary worksurfaces are profiled on user side only. Durable scratch-resistant matte finish on all units. Optional high pressure laminate tops available. RECESSED DESK MODESTY 36"D Rectangular Desk - 9" 30"D Rectangular Desk - 3" 36"D Bow Desk (Ends are 30") - 3" PEDESTALS Full or 3/4 pedestals with full modesty panels are standard. WIRE MANAGEMENT Wire management is standard in returns, bridge units, credenzas, corner units and hutch units. DRAWERS Engineered composite wood material with mitered corners provides excellent strength and durability. Wood grain patterned drawer sides provide a consistent appearance and are stain resistant and easily cleaned. FILE DRAWERS File drawers have full extension, progressive action slides with steel ball bearing suspensions. They accommodate letter or legal filing. END AND BACK PANEL GRAIN DIRECTION End panels on all desks, credenzas, returns, bridges, P-tables, bullet tables, wardrobes, lateral files, bookcases, corner units, cockpit corner units, modular pedestals, shells and wing assemblies are all vertical grain. Back panels on units that are 60" overall and larger have horizontal grain direction. LOCKING Pedestal locks secure all drawers with the turn of a single key. All units are standard shipped keyed alike. Specific key requirements may be specified on the purchase order at the time the order is placed for field installation (ships separately). Removable lock cores allow for re-keying in the field. Built up units (desks, credenzas, returns, etc.) locking is on inside of pedestal except for multi-files or lateral files. Multi-flies, lateral files and modular products locking is on front of pedestal. FILING See page 1165 for diagrams of all Pulse filing capabilities. 435

3 FINISH AND FABRIC PARTNERS Available in (EW) Bead, (EX) Flair and (EY) Square edges only: (EW) Bead (EX) Flair (EY) Square Molasses VM2 Cognac Desert MC2 Mocha Kodiak LC2 Sienna Root BU2 Burnished Toffee BE2 Blonde Linen MH2 Honey Pecan LM2 Ochre Quarry Steel Natural Champagne Natural Steam Wash BL2 Black FW2 Frosty White HPL available on worksurface only 10% upcharge (When HPL top is specified, the chassis will be matching TFL) HPL Wood Grain Laminate (10% upcharge) QEP Molasses MGP Cognac DSP Desert CMP Mocha KDP Kodiak CHP Sienna NWP Root BUP Burnished MEP Toffee BEP Blonde COP Linen HNP Honey PCP Pecan TMP Ochre QRP STP NGP NHP Quarry Steel Natural Champagne Natural Steam Wash Fabric Partners ARC-COM ARCHITEX CAMIRA CARNEGIE DESIGNTEX GREEN HIDES HELVETIA LEATHER MAHARAM MAYER FABRICS MOMENTUM SPRADLING INTERNATIONAL, INC. STINSON ULTRAFABRICS BLP Black FWP Frosty White Available in (EY) Square edge only: GR2 Grey RW2 Pure White SG2 Slate Grey WL2 Wallaby HPL available on worksurface only 10% upcharge (When HPL top is specified, the chassis will be matching TFL) GRP Grey RWP Pure White SGP Slate Grey WLP Wallaby 436

4 DRAWER PULL (BB) Grip Black (VJ) Era Black (BD) Axis Black (VG) Forte Black (BC) Grip Satin Nickel (VK) Era Satin Nickel (BE) Axis Satin Nickel (VH) Forte Satin Nickel Note: Not available on Desk. (BF) Empire Black (BG) Empire Satin Nickel (BH) Icon Black (BJ) Icon Satin Nickel STANDARD GROMMETS (FACTORY INSTALLED) Grommets are standard on these secondary worksurfaces: returns, bridge units, credenzas, corner units and hutch units. overall size 3.375" x 2" inside dimensions with inserts 1.5" x 0.75" inside dimensions without inserts " x 1.5" OPTIONAL WORKSURFACE GROMMETS (FACTORY INSTALLED) Grommets Location Option: list G1 No Grommet G2 Grommet on Right $ 65 G3 Grommet in Center 65 G4 Grommet on Left 65 G5 Grommets Right and Left 130 G6 Grommets Right and Center 130 G7 Grommets Left and Center 130 G8 Grommets Right, Left and Center 195 Note: Desk grommet options: G1, G2, G4 and G5 only. Note: Bridges, Returns, Kneespace Credenzas are standard with G3 center grommet; for other grommet options on these units: Add upcharge of $65 list for grommets specified in addition to center grommet; i.e. for G5 Right and Left, add $130 list; for G6 Right and Center, add $65 list. Grommet color will match drawer pull color. For Bullet and P-Tables, Bridges, Corner Units, Desk Shell, Credenza Shell and Modular Cabinet Worksurfaces, specify grommet color: Grommet Color: G1 LJ LK No Grommet Black Satin Nickel BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL H1P BKO Luster Grey Oiled Bronze Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey 437

5 ADJUSTABLE HEIGHT PEDESTAL DESK STANDARD FEATURES Electronic Height Adjustable (30"-46"H) Table Maximum Weight Allowance is 75 lbs. Full Fixed Recessed Modesty Panel (9" on 36"D Desk, 3" on 30"D Desk) Two 16"D Box Drawers Fixed 8"D Shelf in Kneespace Letter or Legal Filing Locking Pedestals (Locks Located in Kneespace) Optional Height Adjustable Partial Modesty Panel Attaches to Worksurface Optional Center Drawer (see page 517) NOTE: Not Recommended for Use with Tackboard SINGLE PEDESTAL HALPD-2 LEFT $ 4, HALPD-2 LEFT $ 4, HALPD-2 LEFT $ 4, HARPD-2 RIGHT $ 4, HARPD-2 RIGHT $ 4, HARPD-2 RIGHT $ 4,119 One 16"D File Drawer 66"W has "W Kneespace 72"W has "W Kneespace NOTE: Loose Support Included for Attaching to Static Return or Bridge DOUBLE PEDESTAL HADP "W Kneespace $ 4, HADP "W Kneespace $ 4, HADP "W Kneespace $ 4,423 Three 16"D File Drawers Edge Pull Pull Modesty Grommet Key VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP EW Bead EX Flair Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel X9 No Partial Modesty - Standard GJ Partial Modesty $302 G1 No Grommet - Standard G2 Right $65 G4 Left $65 G5 Right and Left $130 NM Locking - Standard Key (#345) H2X Locking - Key Specific NOTE: Lock Core Order Form on page K must be included when ordering H2X option NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge pull pull finish modesty grommet key. See page 436 for a complete offering of finishes HALPD-2 Edge Pull Pull Modesty Grommet Key EW Grip BWT X9 G1 NM 438

6 ADJUSTABLE HEIGHT DESK SHELL STANDARD FEATURES Electronic Height Adjustable (30"-46"H) Table Maximum Weight Allowance is 75 lbs. Full Fixed Recessed Modesty Panel (3") Fixed 8"D Shelf in Kneespace Optional Height Adjustable Partial Modesty Panel Attaches to Worksurface Optional Center Drawer (see page 517) NOTE: Loose Support Included for Attaching to Static Return or Bridge NOTE: Not Recommended for Use with Tackboard HASHEL $ 3, HASHEL $ 3, HASHEL $ 3, HASHEL $ 3,813 Edge Modesty Grommet Grommet Color FL Wood Grain Laminate VM2 MC2 LC2 BU2 BE2 MH2 LM2 EW Bead X9 No Partial Modesty - Standard G1 No Grommet - Standard G2 Right $65 G4 Left $65 G5 Right and Left $130 G1 No Grommet - Standard LJ Black LK Satin Nickel BL2 FW2 EX Flair GJ Partial Modesty $302 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge modesty grommet grommet color. See page 436 for a complete offering of finishes HASHEL-2 Edge Modesty Grommet Grommet Color EW X9 G1 G1 439

7 ADJUSTABLE HEIGHT TABLE DESK STANDARD FEATURES Electronic Height Adjustable (22.75"-48.75"H) Table Maximum Weight Allowance is 75 lbs. Rectangular Worksurface with Profile all Four Sides Offset Square Lifting Column Flat Base Foot with Glide Optional Height Adjustable Partial Modesty Panel Attaches to Worksurface HAD $ 2, HAD $ 2, HAD $ 2, HAD $ 2, HAD $ 2, HAD $ 2,327 Edge Modesty Grommet Grommet Color VM2 MC2 LC2 BU2 BE2 MH2 LM2 EW Bead X9 No Partial Modesty - Standard G1 No Grommet - Standard G2 Right $65 G4 Left $65 G5 Right and Left $130 G1 No Grommet - Standard LJ Black LK Satin Nickel BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP EX Flair GJ Partial Modesty HAD $ HAD $ HAD $ HAD $ HAD $ HAD $341 BLP FWP NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge modesty grommet grommet color. See page 436 for a complete offering of finishes HAD Edge Modesty Grommet Grommet Color EW X9 G1 G1 440

8 ADJUSTABLE HEIGHT TABLE BRIDGE STANDARD FEATURES Electronic Height Adjustable (22.75"-48.75"H) Table Maximum Weight Allowance is 75 lbs. Rectangular Worksurface with Profile on User Side Short Grain Direction Offset Square Lifting Column Flat Base Foot with Glide Optional Height Adjustable Partial Modesty Panel Attaches to Worksurface HAB $ 1, HAB $ 1,971 Edge Modesty Grommet Color VM2 MC2 LC2 BU2 BE2 MH2 LM2 EW Bead X9 No Partial Modesty - Standard G1 No Grommet LJ Black LK Satin Nickel BL2 FW2 EX Flair GJ Partial Modesty $287 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge modesty grommet color. See page 436 for a complete offering of finishes HAB Edge Modesty Grommet Color EW X9 G1 441

9 WIRE MANAGEMENT TROUGH STANDARD FEATURES WMT $ 40 WMT $ 60 WMT $ 66 WMT $ 81 WMT

10 DOUBLE PEDESTAL DESK STANDARD FEATURES Two Box Drawers Locking Pedestals Optional Center Drawer (see page 517) FULL PEDESTAL FDP 28.25"W Kneespace $ 1, FDP 34.25"W Kneespace $ 1, FDP 40.25"W Kneespace $ 1, FDP 40.25"W Kneespace $ 1,904 Recessed Modesty (3" on 30"D Desks, 9" on 36"D Desk) Three File Drawers (Letter or Legal) 3/4 PEDESTAL DP 28.25"W Kneespace $ 1, DP 34.25"W Kneespace $ 1, DP 40.25"W Kneespace $ 1, DP 40.25"W Kneespace $ 1,664 Recessed Modesty (3" on 30"D Desks, 9" on 36"D Desk) Two File Drawers (Letter or Legal) BOW SHAPED WORKSURFACE FDPB 40.25"W Kneespace $ 2,318 Recessed Modesty (3" at Ends, 9" at Bow) Three File Drawers (Letter or Legal) 30"D Ends Edge Pull Pull Grommet Key VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP EW Bead EX Flair Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel G1 No Grommet - Standard G2 Right $65 G4 Left $65 G5 Right and Left $130 NM Locking - Standard Key (#345) H2X Locking - Key Specific NOTE: Lock Core Order Form on page K must be included when ordering H2X option NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge pull pull finish grommet key. See page 436 for a complete offering of finishes FDP \ Edge Pull Pull Grommet Key EW Grip BWT G1 NM 443

11 TABLE DESK STANDARD FEATURES TD $ 1,747 Edge Modesty Fabric/Grade (if applicable) Leg VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 EW Bead EX Flair FR No Modesty - Standard GJ Laminate $146 Matte Silver-Framed JX Frosted Insert $417 KA Fabric Insert (specify fabric-see pricing below) Grade, Vendor, Pattern, Color Satin Nickel MN with Ebony Feet - Standard MM with Casters $187 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis wil be matching TFL Modesty (KA - Fabric) yds sq ft com col com (54") col L1 L2 L ,117 1,235 1,352 1,470 1,587 1, ,050 SPECIFY: edge modesty textile pattern and color (if applicable) leg. See page 436 for a full list of finishes and graded-in fabric options TD Edge Modesty Fabric/Grade (if applicable) Leg EW FR Grade 3, Momentum, Hue, Smoke MN 444

12 P-SHAPED TABLE WORKSURFACE WITH END PANEL STANDARD FEATURES P-Shaped Worksurface Profiled on Rim, 36"W Side has Square Edge 12"H Laminate Modesty Panel 4" Metal Cylinder Cannot be Used as a Freestanding Unit Optional Center Drawer (see page 517) Ships KD EPTL/CB4 LEFT $ 1, EPTL/CB4 LEFT $ 2,232 End Panel on Right EPTR/CB4 RIGHT $ 1, EPTR/CB4 RIGHT $ 2,232 End Panel on Left Edge Base Grommet Grommet Color VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP EW Bead EX Flair BWT BUFF CHLK SGLD GRPH MSL H1P BKO POLR SBRZ H1F Bone White Buff Chalk Gold Graphite Luster Grey Oiled Bronze Onyx Polar Soft Bronze Warm Grey G1 No Grommet - Standard KP Grommet $65 G1 No Grommet - Standard LJ Black LK Satin Nickel BLP FWP NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge base finish grommet grommet color. See page 436 for a complete offering of finishes EPTL/CB4 Edge Base Grommet Grommet Color EW BWT G1 G1 445

13 P-SHAPED TABLE WORKSURFACE STANDARD FEATURES Profiled on Rim, 36"W Side has Square Edge "H with Base Cannot be Used as a Freestanding Unit Optional Center Drawer (see page 517) LPT LEFT $ 1, RPT RIGHT $ 1, LPT LEFT $ 1, RPT RIGHT $ 1,456 Use with 4-CB4 or 4-SB4 Base 84"W Requires a Modesty Panel or Additional Support VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 NOTE: When HPL top is specified, the chassis will be matching TFL HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP Edge EW Bead EX Flair GR2 RW2 SG2 WL2 NOTE: When HPL top is specified, the chassis will be matching TFL GRP RWP SGP WLP SPECIFY: edge. See page 436 for a complete offering of finishes LPT Edge EW 446

14 BULLET SHAPED TABLE WORKSURFACE WITH END PANEL STANDARD FEATURES Bullet Shaped Worksurface Profiled on Rim 12"H Laminate Modesty Panel 4" Metal Cylinder Cannot be Used as a Freestanding Unit Optional Center Drawer (see page 517) Ships KD 30" and 36"W Side has Square Edge EBTL/CB4 LEFT $ 1, EBTL/CB4 LEFT $ 1, EBTL/CB4 LEFT $ 1,884 End Panel on Right EBTR/CB4 RIGHT $ 1, EBTR/CB4 RIGHT $ 1, EBTR/CB4 RIGHT $ 1,884 End Panel on Left Edge Base Grommet Grommet Color VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP EW Bead EX Flair BWT BUFF CHLK SGLD GRPH MSL H1P BKO POLR SBRZ H1F Bone White Buff Chalk Gold Graphite Luster Grey Oiled Bronze Onyx Polar Soft Bronze Warm Grey G1 No Grommet - Standard KP Grommet $65 G1 No Grommet - Standard LJ Black LK Satin Nickel BLP FWP NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge base finish grommet grommet color. See page 436 for a complete offering of finishes EBTL/CB4 Edge Base Grommet Grommet Color EW BWT G1 G1 447

15 BULLET SHAPED TABLE WORKSURFACE STANDARD FEATURES Worksurface Profiled on Rim "H with Base Cannot be Used as a Freestanding Unit Optional Center Drawer (see page 517) Use with 4-CB4 or 4-SB4 Base 30" and 36"D Side has Square Edge 84"W Requires a Modesty Panel or Additional Support BT $ BT $ BT $ 1,306 VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 NOTE: When HPL top is specified, the chassis will be matching TFL HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP Edge EW Bead EX Flair GR2 RW2 SG2 WL2 NOTE: When HPL top is specified, the chassis will be matching TFL GRP RWP SGP WLP SPECIFY: edge. See page 436 for a complete offering of finishes BT Edge EW 448

16 BULLET AND P-SHAPED WORKSURFACE BASE STANDARD FEATURES Use on Bullet Table Worksurfaces BT, BT and BT Use on P-Worksurfaces LPT, RPT and LPT, RPT Use on Cockpit Bullet Corner Tables LBTF and RBTF 4" Metal Cylinder Base 4-CB $ 288 Base BWT BUFF CHLK SGLD GRPH MSL H1P BKO POLR SBRZ H1F Bone White Buff Chalk Gold Graphite Luster Grey Oiled Bronze Onyx Polar Soft Bronze Warm Grey SPECIFY: Base finish. See page 436 for a complete offering of finishes. 4-CB4 Base BWT 449

17 OPTIONAL BASE FOR BULLET AND P-SHAPED WORKSURFACES STANDARD FEATURES Laminate Base Adjustable Leveler 4-SB $ 682 VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP GRP RWP SGP WLP SPECIFY:. See page 436 for a complete offering of finishes. 4-SB4 450

18 MODESTY PANEL FOR BULLET AND P-SHAPED TABLES STANDARD FEATURES LAMINATE TMP $ 179 Use on 6630 Bullet Tables TMP $ 191 Use on 7236 Bullet Tables, 7248 Cockpit Bullet Tables and 7242 P-Tables TMP $ 289 Use on 8436 Bullet Tables and 8442 P-Tables TEP $ 260 Use on 30"W Bullet Worksurfaces TEP $ 267 Use on 36"W Bullet and P-Worksurfaces VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP GRP RWP SGP WLP SPECIFY:. See page 436 for a complete offering of finishes TMP 451

19 MODESTY PANEL FOR BULLET AND P-SHAPED TABLES STANDARD FEATURES TMPG $ 535 Use on 6630 Bullet Tables Matte Silver-Framed Frosted Insert TMPG $ 544 Use on 7236 Bullet Tables, 7248 Cockpit Bullet Tables and 7242 P-Tables TMPG $ 579 Use on 8436 Bullet Tables and 8442 P-Tables TMPG 452

20 DOOR CREDENZA STANDARD FEATURES Locking Pedestals FULL PEDESTAL FCRD $ 1, FCRD $ 1, FCRD $ 1,998 Four File Drawers (Letter or Legal) Adjustable Shelf Behind Doors 3/4 PEDESTAL CRD $ 1, CRD $ 1,738 Two Box Drawers Two File Drawers (Letter or Legal) Edge Pull Pull Key VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP EW Bead EX Flair Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel NM Locking - Standard Key (#345) H2X Locking - Key Specific NOTE: Lock Core Order Form on page K must be included when ordering H2X option NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge pull pull finish key. See page 436 for a complete offering of finishes FCRD Edge Pull Pull Key EW Grip BWT NM 453

21 KNEESPACE CREDENZA STANDARD FEATURES Locking Pedestals FULL PEDESTAL FCR $ 1, "W Kneespace FCR $ 1,696 Four File Drawers (Letter or Legal) 34.25"W Kneespace FCR $ 1, "W Kneespace 3/4 PEDESTAL CR $ 1, "W Kneespace CR $ 1,593 Two Box Drawers Two File Drawers (Letter or Legal) 40.25"W Kneespace Edge Pull Pull Grommet Key VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP EW Bead EX Flair Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel G1 No Grommet G2 Right $65 G3 Center - Standard G4 Left $65 G5 Right and Left $130 G6 Right and Center $65 G7 Left and Center $65 G8 Right, Left and Center $130 NM Locking - Standard Key (#345) H2X Locking - Key Specific NOTE: Lock Core Order Form on page K must be included when ordering H2X option NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge pull pull finish grommet key. See page 436 for a complete offering of finishes FCR Edge Pull Pull Grommet Key EW Grip BWT G1 NM 454

22 LATERAL FILE CREDENZA STANDARD FEATURES Four Lateral File Drawers (Letter or Legal) Drawer Front Locking with Anti-Tilt Mechanism CLF $ 2,557 Edge Pull Pull Key VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP EW Bead EX Flair Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel NM Locking - Standard Key (#345) H2X Locking - Key Specific NOTE: Lock Core Order Form on page K must be included when ordering H2X option NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge pull pull finish key. See page 436 for a complete offering of finishes CLF Edge Pull Pull Key EW Grip BWT NM 455

23 BUFFET CREDENZA STANDARD FEATURES Two Drawers Four Doors - Storage Space with Two Adjustable Shelves BCC $ 2,355 Edge Pull Pull FInish VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 NOTE: When HPL top is specified, the chassis will be matching TFL HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP GRP RWP SGP WLP EW Bead EX Flair Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel Pull SPECIFY: edge finish edge pull pull finish. See page 436 for a complete offering of finishes BCC Edge Pull Pull EW Grip BWT 456

24 TRANSACTION COUNTER STANDARD FEATURES Profiled on User Side and Approach Sides Optional Task Lights (see page 1148) TC $ TC $ 522 VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 NOTE: When HPL top is specified, the chassis will be matching TFL HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP Edge EW Bead EX Flair GR2 RW2 SG2 WL2 NOTE: When HPL top is specified, the chassis will be matching TFL GRP RWP SGP WLP SPECIFY: edge. See page 436 for a complete offering of finishes TC Edge EW 457

25 HIGHBACK ORGANIZER STANDARD FEATURES Square Edge Only Six Hinged Doors Wire Management "H Clearance ed Back Unless W3 Toolbar Specified Optional Task Lights (see page 1148) Optional Work Tools to Use with Toolbar (see page 469) yds com for option model w d h wt cu ft W4 W5 list HD $ 2, HD $ 2, HD $ 2,319 Door Inside Back Panel Fabric/Grade (if applicable) VM2 MC2 LC2 BU2 BE2 MH2 LM2 JB Laminate Panel - Standard JC Matte Silver-Framed Frosted Insert $299 W2 No Tackboard - Standard W4 Tackboard/White Markerboard/Tackboard W5 Tackboard/Toolbar/Tackboard See pricing below X9 No Fabric Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility BL2 FW2 GR2 RW2 SG2 WL2 Fabric Tackboard W4 yds sq ft com col com (54") col L1 L2 L3 1 n/a ,005 1,052 1,099 1,146 1,193 1,240 n/a n/a n/a 1.25 n/a ,031 1,090 1,148 1,207 1,266 1,325 1,383 n/a n/a n/a Fabric Tackboard W5 yds sq ft com col com (54") col L1 L2 L n/a ,057 1,147 1,276 1,406 1,535 1,664 1,794 1,923 2,052 2,182 2,311 2,440 n/a n/a n/a 3.25 n/a ,016 1,092 1,199 1,352 1,505 1,657 1,810 1,963 2,116 2,269 2,422 2,574 2,727 n/a n/a n/a SPECIFY: door inside back panel textile pattern and color (if applicable). See page 436 for a full list of finishes and graded-in fabric options HD6-2 Door Inside Back Panel Fabric/Grade (if applicable) JB W2 Grade 3, Momentum, Hue, Smoke 458

26 HIGHBACK ORGANIZER STANDARD FEATURES Square Edge Only Four Hinged Doors Wire Management "H Clearance ed Back Unless W3 Toolbar Specified Optional Task Lights (see page 1148) Optional Work Tools to Use with Toolbar (see page 469) yds com for option model w d h wt cu ft W4 W5 list HD $ 1, HD $ 1, HD $ 1, HD $ 1, HD $ 1,700 Door Inside Back Panel Fabric/Grade (if applicable) VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 JB Laminate Panel - Standard JC Matte Silver-Framed Frosted Insert $248 W2 No Tackboard - Standard W3 Toolbar in Back Panel/No Tackboard/ Unfinished Back $248 W4 Tackboard/White Markerboard/Tackboard W5 Tackboard/Toolbar/Tackboard See pricing below X9 No Fabric Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility Fabric Tackboard W4 yds sq ft com col com (54") col L1 L2 L n/a n/a n/a n/a Fabric Tackboard W5 yds sq ft com col com (54") col L1 L2 L n/a ,057 1,139 1,222 1,304 1,386 1,469 1,551 1,633 1,715 n/a n/a n/a 2 n/a ,012 1,106 1,201 1,295 1,389 1,483 1,577 1,671 1,765 1,859 n/a n/a n/a 2.25 n/a ,049 1,155 1,261 1,367 1,472 1,578 1,684 1,790 1,896 2,001 n/a n/a n/a 2.5 n/a ,088 1,205 1,323 1,440 1,558 1,676 1,793 1,911 2,028 2,146 n/a n/a n/a SPECIFY: door inside back panel textile pattern and color (if applicable). See page 436 for a full list of finishes and graded-in fabric options HD4-2 Door Inside Back Panel Fabric/Grade (if applicable) JB W2 Grade 3, Momentum, Hue, Smoke 459

27 ONE-PIECE TACKBOARD STANDARD FEATURES model w d h wt cu ft FT Use with HD4-2 yds sq ft com col com (54") col L1 L2 L3 2 n/a ,084 1,178 1,272 1,366 1,460 n/a n/a n/a model w d h wt cu ft FT Use with HD4-2 yds sq ft com col com (54") col L1 L2 L3 2 n/a ,041 1,135 1,229 1,323 1,417 1,511 n/a n/a n/a model w d h wt cu ft FT Use with HD4-2 yds sq ft com col com (54") col L1 L2 L n/a ,019 1,124 1,230 1,336 1,442 1,548 1,653 n/a n/a n/a model w d h wt cu ft FT Use with HD4-2 yds sq ft com col com (54") col L1 L2 L3 2.5 n/a ,111 1,229 1,347 1,464 1,582 1,699 1,817 n/a n/a n/a model w d h wt cu ft FT Use with HD4-2 yds sq ft com col com (54") col L1 L2 L3 2.5 n/a ,111 1,229 1,347 1,464 1,582 1,699 1,817 n/a n/a n/a model w d h wt cu ft FT Use with HD6-2 yds sq ft com col com (54") col L1 L2 L n/a ,096 1,225 1,354 1,484 1,613 1,742 1,872 2,001 2,130 n/a n/a n/a model w d h wt cu ft FT Use with HD6-2 yds sq ft com col com (54") col L1 L2 L3 3 n/a ,021 1,162 1,303 1,444 1,585 1,727 1,868 2,009 2,150 2,291 n/a n/a n/a Fabric/Grade Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility SPECIFY: Textile pattern and color. See page 2 for a full list of our graded-in fabric options. FT1089 Fabric/Grade Grade 3, Momentum, Hue, Smoke 460

28 TWO-PIECE TACKBOARD STANDARD FEATURES Two "W Pieces Use with HD6-2 Set of Two model w d h wt cu ft FT yds sq ft com col com (54") col L1 L2 L n/a ,073 1,226 1,378 1,531 1,684 1,837 1,990 2,143 2,295 2,448 n/a n/a n/a Fabric/Grade Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility SPECIFY: Textile pattern and color. See page 436 for a full list of our graded-in fabric options. FT1080 Fabric/Grade Grade 3, Momentum, Hue, Smoke 461

29 WALLMOUNT ORGANIZER STANDARD FEATURES Organizer has Square Edge Only Optional Task Lights (see page 1148) HDW $ HDW $ HDW $ 764 Two Hinged Doors HDW $ 1,016 Three Hinged Doors HDW $ 1,196 Use with 60"W Credenzas Four Hinged Doors HDW $ 1,215 Use with 66"W Credenzas HDW $ 1,244 Use with 72"W Credenzas VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 Door JB Laminate Panel - Standard JC Matte Silver-Framed Frosted Insert Two Hinged Doors $144 Three and Four Hinged Doors $231 SPECIFY: door. See page 436 for a complete offering of finishes HDW2 Door JB 462

30 WALLMOUNT SHELF STANDARD FEATURES Optional Task Lights (see page 1148) HSW $ HSW $ HSW $ 734 VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 SPECIFY:. See page 436 for a complete offering of finishes HSW 463

31 ONE-PIECE TACKBOARD STANDARD FEATURES Cannot be Used as Stand Alone or Mounted Directly to Wall Must be Used with a Wallmount Unit model w d h wt cu ft FT Use with 30"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,035 n/a n/a n/a model w d h wt cu ft FT n/a n/a n/a Use with 36"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a ,043 1,113 1,184 n/a n/a n/a model w d h wt cu ft FT Use with 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a ,053 1,123 1,194 n/a n/a n/a model w d h wt cu ft FT Use with 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,008 1,091 1,173 1,255 1,337 n/a n/a n/a model w d h wt cu ft FT Use with 60"W or Two 30"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2 n/a ,031 1,125 1,219 1,313 1,407 1,501 n/a n/a n/a model w d h wt cu ft FT Use with 66"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,019 1,124 1,230 1,336 1,442 1,548 1,653 n/a n/a n/a model w d h wt cu ft FT Use with 72"W or Two 36"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2.5 n/a ,091 1,209 1,327 1,444 1,562 1,679 1,797 n/a n/a n/a Fabric/Grade Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility SPECIFY: Textile pattern and color. See page 436 for a full list of our graded-in fabric options. FT2076 Fabric/Grade Grade 3, Momentum, Hue, Smoke 464

32 ONE-PIECE TACKBOARD STANDARD FEATURES Cannot be Used as Stand Alone or Mounted Directly to Wall Must be Used with a Wallmount Unit model w d h wt cu ft FT Use with Two 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,126 1,255 1,385 1,514 1,643 1,773 1,902 2,031 n/a n/a n/a model w d h wt cu ft FT Use with Two 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 3 n/a ,027 1,168 1,309 1,450 1,591 1,733 1,874 2,015 2,156 2,297 n/a n/a n/a Fabric/Grade Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility SPECIFY: Textile pattern and color. See page 436 for a full list of our graded-in fabric options. FT2139 Fabric/Grade Grade 3, Momentum, Hue, Smoke 465

33 TACKBOARD/TOOLBAR/TACKBOARD STANDARD FEATURES Powder Coated Metal Toolbar Side Powder Coated Metal Accents Provide Wire Management Optional Work Tools to Use with Toolbar (see page 469) T T model w d h wt cu ft FTS Use with 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a ,050 1,121 1,191 1,262 1,332 1,403 1,473 1,544 1,614 1,685 n/a n/a n/a model w d h wt cu ft FTS Use with 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a ,050 1,121 1,191 1,262 1,332 1,403 1,473 1,544 1,614 1,685 n/a n/a n/a model w d h wt cu ft FTS Use with 54"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2 n/a ,057 1,151 1,245 1,340 1,434 1,528 1,622 1,716 1,810 1,904 1,998 n/a n/a n/a model w d h wt cu ft FTS Use with 60"W or Two 30"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2 n/a ,026 1,091 1,185 1,279 1,374 1,468 1,562 1,656 1,750 1,844 1,938 2,032 n/a n/a n/a model w d h wt cu ft FTS Use with 66"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,007 1,060 1,134 1,240 1,346 1,452 1,558 1,663 1,769 1,875 1,981 2,087 2,192 n/a n/a n/a model w d h wt cu ft FTS Use with 72"W or Two 36"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2.5 n/a ,039 1,098 1,180 1,298 1,415 1,533 1,650 1,768 1,886 2,003 2,121 2,238 2,356 n/a n/a n/a model w d h wt cu ft FTS Use with Two 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a 1,085 1,130 1,182 1,247 1,337 1,466 1,596 1,725 1,854 1,984 2,113 2,242 2,372 2,501 2,630 n/a n/a n/a model w d h wt cu ft FTS Use with Two 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 3 n/a 1,292 1,341 1,398 1,468 1,567 1,708 1,849 1,990 2,131 2,272 2,414 2,555 2,696 2,837 2,978 n/a n/a n/a Fabric/Grade Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility SPECIFY: Textile pattern and color. See page 436 for a full list of our graded-in fabric options. FTS2106 Fabric/Grade Grade 3, Momentum, Hue, Smoke 466

34 TACKBOARD/MARKERBOARD/TACKBOARD STANDARD FEATURES Side Powder Coated Metal Accents Provide Wire Management White Laminate Markerboard Support Rails Included for Mounting to Wall Optional Work Tools to Use with Toolbar (see page 469) model w d h wt cu ft FTM T M T Use with 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1 n/a ,018 1,065 1,112 1,159 1,206 1,253 1,300 1,347 n/a n/a n/a model w d h wt cu ft FTM Use with 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1 n/a ,018 1,065 1,112 1,159 1,206 1,253 1,300 1,347 n/a n/a n/a model w d h wt cu ft FTM Use with 54"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,042 1,101 1,160 1,219 1,277 1,336 1,395 1,454 1,512 n/a n/a n/a model w d h wt cu ft FTM Use with 60"W or Two 30"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,057 1,116 1,175 1,234 1,292 1,351 1,410 1,469 1,527 n/a n/a n/a model w d h wt cu ft FTM Use with 66"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a ,021 1,080 1,139 1,198 1,257 1,315 1,374 1,433 1,492 1,550 n/a n/a n/a model w d h wt cu ft FTM Use with 72"W or Two 36"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a ,015 1,085 1,156 1,226 1,297 1,367 1,438 1,508 1,579 1,649 1,720 n/a n/a n/a model w d h wt cu ft FTM Use with Two 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a 1,006 1,031 1,059 1,094 1,144 1,214 1,285 1,355 1,426 1,496 1,567 1,637 1,708 1,778 1,849 n/a n/a n/a model w d h wt cu ft FTM Use with Two 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a 1,223 1,260 1,302 1,355 1,429 1,535 1,641 1,747 1,853 1,958 2,064 2,170 2,276 2,382 2,487 n/a n/a n/a Fabric/Grade Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility SPECIFY: Textile pattern and color. See page 436 for a full list of our graded-in fabric options. FTM2087 Fabric/Grade Grade 3, Momentum, Hue, Smoke 467

35 TACKBOARD/MARKERBOARD/TACKBOARD WITH TOOLBAR/TACKBOARD STANDARD FEATURES Powder Coated Metal Toolbar Side Powder Coated Metal Accents Provide Wire Management White Laminate Markerboard Support Rails Included for Mounting to Wall Optional Work Tools to Use with Toolbar (see page 469) model w d h wt cu ft T M T T FTMS Use with 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a 990 1,015 1,043 1,078 1,128 1,198 1,269 1,339 1,410 1,480 1,551 1,621 1,692 1,762 1,833 n/a n/a n/a model w d h wt cu ft FTMS Use with 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 1.5 n/a 990 1,015 1,043 1,078 1,128 1,198 1,269 1,339 1,410 1,480 1,551 1,621 1,692 1,762 1,833 n/a n/a n/a model w d h wt cu ft FTMS Use with 54"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2 n/a 1,020 1,053 1,091 1,138 1,203 1,297 1,391 1,486 1,580 1,674 1,768 1,862 1,956 2,050 2,144 n/a n/a n/a model w d h wt cu ft FTMS Use with 60"W or Two 30"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2 n/a 1,043 1,076 1,114 1,161 1,226 1,320 1,414 1,509 1,603 1,697 1,791 1,885 1,979 2,073 2,167 n/a n/a n/a model w d h wt cu ft FTMS Use with 66"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a 1,072 1,109 1,151 1,204 1,278 1,384 1,490 1,596 1,702 1,807 1,913 2,019 2,125 2,231 2,336 n/a n/a n/a model w d h wt cu ft FTMS Use with 72"W or Two 36"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 2.5 n/a 1,136 1,177 1,224 1,283 1,365 1,483 1,600 1,718 1,835 1,953 2,071 2,188 2,306 2,423 2,541 n/a n/a n/a model w d h wt cu ft FTMS Use with Two 42"W Wallmount Units yds sq ft com col com (54") col L1 L2 L n/a 1,211 1,256 1,308 1,373 1,463 1,592 1,722 1,851 1,980 2,110 2,239 2,368 2,498 2,627 2,756 n/a n/a n/a model w d h wt cu ft FTMS Use with Two 48"W Wallmount Units yds sq ft com col com (54") col L1 L2 L3 3 n/a 1,435 1,484 1,541 1,611 1,710 1,851 1,992 2,133 2,274 2,415 2,557 2,698 2,839 2,980 3,121 n/a n/a n/a Fabric/Grade Grade, Vendor, Pattern, Color NOTE: Fabric must be tested and approved for tackboard use/compatibility SPECIFY: Textile pattern and color. See page 436 for a full list of our graded-in fabric options. FTMS2098 Fabric/Grade Grade 3, Momentum, Hue, Smoke 468

36 SLAT RAIL ACCESSORIES STANDARD FEATURES Metal Warm Silver PAPER CLIP HOLDER SM $ 50 PENCIL CUP SM $ 50 SMALL TRAY SM $ 50 POST-IT-NOTE TRAY SM $ 50 FOLDER TRAY SM $ 78 LARGE PAPER TRAY SM $ 82 With Slots for Hanging Tray SM2-90 HANGING PAPER TRAY SM $ 93 Hangs Under Large Paper Tray SM2-80 SM

37 WALLMOUNT STORAGE BOX STANDARD FEATURES For Wallmounted Application Only, Includes Mounting Bracket to Install Unfinished Back SBW $ SBW $ SBW $ 684 Two Openings SBW $ 709 Three Openings SBW $ SBW $ SBW $ SBW $ SBW $ SBW $ 862 Two Openings SBW $ SBW $ SBW $ SBW $ SBW $ SBW $ 921 Four Openings SBW $ 1, SBW $ 1, SBW $ 1, SBW $ 1, SBW $ 1,404 Six Openings VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 SPECIFY:. See page 436 for a complete offering of finishes SBW 470

38 LAYERING WORKSURFACE STORAGE BOX STANDARD FEATURES Creates a Layered Worksurface Option for Transition from Seated Heads Down Work to Standing Meeting and Collaboration ed Back SB $ SB $ SB $ 684 Two Openings Rests Directly on Worksurfaces SB $ 709 Three Openings Rests Directly on Worksurfaces SB $ SB $ SB $ SB $ SB $ SB $ 862 Two Openings Spans on Worksurface of Two Separate Worksurfaces with a 48"W Maximum Span of Unsupported Space SB $ SB $ SB $ SB $ SB $ SB $ 921 Four Openings Spans on Worksurface of Two Separate Worksurfaces with a 48"W Maximum Span of Unsupported Space SB $ 1, SB $ 1, SB $ 1, SB $ 1, SB $ 1,404 Six Openings Spans on Worksurface of Two Separate Worksurfaces with a 48"W Maximum Span of Unsupported Space VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 SPECIFY:. See page 436 for a complete offering of finishes SB 471

39 WALL SHELF STANDARD FEATURES Mounting Hardware Included NOTE: 5 lb. weight restriction per linear foot WS $ WS $ WS $ WS $ WS $ WS $ WS $ WS $ WS $ 353 VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 Paper Stop X9 No Paper Stop - Standard B3Z Paper Stop $66 SPECIFY: paper stop. See page 436 for a complete offering of finishes WS Paper Stop X9 472

40 STORAGE WARDROBE STANDARD FEATURES Square Edge Only HINGED LSW LEFT $ 1, RSW RIGHT $ 1,389 Full Length Storage with Hanging Bar One Adjustable Shelf ed Back SW $ 1, SW $ 1,981 LEFT SIDE: Three Adjustable Shelves One Stationary Shelf RIGHT SIDE: Full Length Storage with Hanging Bar One Adjustable Shelf ed Back Pull Pull VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel SPECIFY: pull pull finish. See page 436 for a complete offering of finishes LSW Pull Pull Grip BWT 473

41 STORAGE CABINET WITH LATERAL FILE STANDARD FEATURES Square Edge Only TOP SECTION: Two Adjustable Shelves ed Back BOTTOM SECTION: Two Lateral File Drawers (Letter or Legal) Central Locking with Anti-Tilt Mechanism SCL $ 2, SCL $ 2,355 Pull Pull Key VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 GR2 RW2 SG2 WL2 Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel NM Locking - Standard Key (#345) H2X Locking - Key Specific NOTE: Lock Core Order Form on page K must be included when ordering H2X option SPECIFY: pull pull finish key. See page 436 for a complete offering of finishes SCL Pull Pull Key Grip BWT NM 474

42 LATERAL FILE STANDARD FEATURES Drawer Front Mounted Gang Lock with Anti-Tilt LF $ 1, LF $ 1,093 Two Drawers (Letter or Legal) LF $ 1, LF $ 2,025 Four Drawers (Letter or Legal) Edge Pull Pull FInish Key VM2 MC2 LC2 BU2 BE2 MH2 LM2 BL2 FW2 HPL Wood Grain Laminate (10% upcharge) QEP DSP KDP NWP MEP COP PCP QRP STP NGP NHP MGP CMP CHP BUP BEP HNP TMP BLP FWP EW Bead EX Flair Grip Era Axis Forte Empire Icon BWT Bone White BUFF Buff CHLK Chalk SGLD Gold GRPH Graphite MSL Luster Grey H1P Oiled Bronze BKO Onyx POLR Polar SNCK Satin Nckel SBRZ Soft Bronze H1F Warm Grey NOTE: Era is not available in SNCK Satin Nickel NM Locking - Standard Key (#345) H2X Locking - Key Specific NOTE: Lock Core Order Form on page K must be included when ordering H2X option NOTE: When HPL top is specified, the chassis will be matching TFL GR2 RW2 SG2 WL2 GRP RWP SGP WLP NOTE: When HPL top is specified, the chassis will be matching TFL SPECIFY: edge pull pull finish key. See page 436 for a complete offering of finishes LF2 Edge Pull Pull Key EW Grip BWT NM 475