N, N4. End-Suction Centrifugal Pumps standardized EN 733
|
|
|
- Ashley Holmes
- 5 years ago
- Views:
Transcription
1 , Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling and reassembly. Rated speed of rotation ( z): = 200 1/min. = 1 1/min. Connections: P flanges E 2-2. Counter-flanges (on request) Sizes Flanges from 2- to -2 Screwed flanges P 16 E 2-1 from 65-5 to 1-00 Flanges for welding P E 2-1 Shaft sealing Standardized mechanical seal in accordance with ISO 6. Stuffing box seal (on request). Applications -For clean liquids, without abrasives, which are non-aggressive for the pump materials (contents of solids up to 0.2%). -For water supply. -For heating, air conditioning, cooling and circulation plants. -For civil and industrial applications and for agriculture. -For fire fighting applications. -For irrigation. Operating conditions Liquid temperature from - C to +0 C. Ambient temperature up to 0 C. Total suction lift up to 7 m. Maximum permissible working pressure up to bar. Maximum permissible rotation speed: see table on page 52. Materials Components,, B-, B- Mechanical seal Stuffing box Mechanical seal Pump casing Cast iron Bronze Lantern bracket GJL 0 E 61 G-Cu Sn E 2 Impeller Cast iron Bronze GJL 0 E 61 G-Cu Sn E 2 Brass P- Cu Zn 0 Pb 2 UI 5705 For 2-5, 2-, 2-0, 0-0 Shaft Chrome steel Carbon steel Cr-i-Mo steel 1. E 1.01 E (AISI ) C 0 UI (AISI 16) Shaft sleeve Bronze _ G-Cu Sn5 Zn5 Pb5 E 2 _ with chromate surface Mechanical seal Carbon - Ceramic - BR _ Carbon - Ceramic - BR Counter-flanges Steel Fe B UI 7070 Pump-Motor unit, pump connected to a standard electric motor in B construction form (IEC 72), classification scheme EFF2 or EFF1 (igh efficiency) on request, IP protection, three-phase 00 V, z by means of a baseplate, driven by a flexible coupling and with coupling protection. Special features on request - Special mechanical seal. - Chrome-nickel steel AISI 16 pump-shaft. - igher or lower liquid or ambient temperatures. - Other motor protection. - Explosion proof construction in accordance with Directive / EEC (ATE). - Motor for other voltage. - Frequency 60 z (as per 60 z data sheet). Tel Fax
2 Coverage chart n = 200 1/min 0 U.S. g.p.m m 0 0 Imp. g.p.m /0 2/ 0/2 0/0 0/ 2/5 0/5 /2 /0 / /5 M 65/5 65/ /0 65/ 0 0 /2 /0 /16 /2 / ft Q m /h 0 1 l/min Tolerances according to ISO 06, annex A. Performance n = 200 1/min 2-5F 2-5D 2-5A 2-5S 2-B 2-A 2-0D 2-0C 2-0A 0-5F 0-5C 0-5A 0-C 0-B 0-A 0-0D 0-0C 0-0B 0-0AR 0-0A 0-2C 0-2B 0-2A 71 B2 A2 B2 B2 0 S2 0 S2 0 S2 L2 L2 L2 SA2 B2 0 S2 L2 SA2 SA2 SA2 SA2 SA2 SB2 SB2 MA2 Q m /h m P 6,6,,6, 1,2 16,, , ,5 0, 0,6 2 0, 2,5 0,6 2,5 6 1,2,5 2, ,,5 0, 0,67 2 0,7 2,5 0, 2,5 7 1, ,5,1 0,6 1 0, 0,5 1 16,5 0,7,5,5 6* 0,52 0,5 0, ,5* *,5* 0,7 0, 0,6 0, 0, 0,5 0,7 2 21,5,5 * 16* 1* * 0,1 0,6 1,01 1,06 1,26 1, ,5 *,5* 16,5* 1* 0, 1 1, ,25 1, 1,6 1,2 1, 2 2, * * * 1*,5* 1,2 1, 1,7 1, 1, 5 1,6 1,7 1, 1,7 5,5,5 2* * 2* 25* 21* 1,71 1,1 1, 1, 2,05 2,16 2, 2, 2, * * 2,06 2,17 2, 2,5 2, 2,5 2,5, ,5 6* 2* 2,6 2,5 2,6 2,7 2, 2,7,1, ,5 51 * 6*,,5,51,67,,2, 1 1 0,6 1,00 1,0 1,07 1, ,5 16 1,21 1,26 1,2 1, 1, , 7 1,65 1,72 1, ,6 1,72 1, 1,0 2 2, ,5 2,0 2, 2, 2,1 2, 7 6,5 6, ,70 2,,01,,5 7,5,,5,51,66,6 0,5,5 6,,5,7,5,,5,5,6,,1,6, ,,70 5,07 5, ,5 5,7 5,0 5, 6, ,5 5,5 5,5 6,16 6, 6,2 7,2 6,5 6,5 6 6,5 67 6,7 7, 6 7,1,7 0 0,5,5,1,7,21,6, * 2,5,5 1, 1,1,5 1, 25 2,67,5,5,5,0,5,2,5 5,17 5,5 52,5 6,0 56,5 7,72 6,1 7, 1, 16,5 2,06 2,5 2,7 2,72, 5,,5 6,70,07 6,5,5 5,60 6,5 6 16,5 2,0 2, 2 2,7,5,, , 2,17 2,7,01 1,,5 5,7 7,01 2,5 7,,5,,02 60,5,,0 7 1,00 6, , 2, , 26,05 0,5 7, 0, 51,5 76 1, ,1 1,02 2,5, 5 2,5,5 5, 70,5 1, ,, Rated motor power output. P Pump power input. Total head in m. * Maximum suction lift 1-2 m. Tel Fax
3 Performance n = 200 1/min PUMP POMPA B- B- -0B B- -0A B- -0S B- -2C B- -2B B- -2A B- -2S -5F -5D -5A -5S -B -A -0B -0A -0S -2C -2B -2A -2S M/E M/D M/C L2 SA2 SB2 MA2 L2 1 M2 L2 SA2,5,5 Q m /h m P 2 7, ,1 6, ,2 6,62,5,,5,76 6,1 7,2 60 7, 6,5,0,5,,5 1,6 1 1,7 1, 1 2,02 2,0 2,1 2, 2,1 6 2, 2,5,5 2,5,5 2,7 2,1 16,5 2,1 2,6 1 2,,5 2,2 2, 2,7 2, 2, 2,,5 21,6,5,7 1,5,7 1,6,5, 1,1,7 26,5, 26,52 2,71 2,5,7 2,5,0,,25,2 16,5,2 1,2 1,26 1,2, 1,,5, 2,5,71 2,0 26 5, 2 5,2 2 5,0 1 5,0 1 5,2 1 5,,5 5,,5 5, 7 6,02 6,5 6,1,5 6,67 2,5 6,5 7, 7, 2 7, 2 7, 7,1,5 7,2 6, 7 6,7 7,,5 5 2,5,02 0, 7,77,01,5,0 2, 2, 2 5 7,,56 52,,57,05 5,5,,5, 7, 5 2,5 5,5, 5,5,7 5,5, 5,2 5,,05,5 1 7,5 5,02, 0,5, 7,0 5,06 5,2 5,,5 6,0,,2, 2,5,5 2,5,0 6,5 6,05 66, , ,77 52,5 1, 6,5 1,77 1,,2 7,5 6 7,5 1,7 77, 16, 7 16, ,25 5,5, 5 7 1,5 6, 16, 17,2 7,5,02,1 71,62 6,5,6 7,5 6 5, 0, 7 2, 2,5, 1 2, 57, 56,5, 56,5 5, 51,6 1,5 1,6 2 1,2,5 7,1 2,2 2, 25*, , *,,, 1,6 1,7, 16,2 16, 17,,2,,6, PUMP POMPA B- B- 65-0C B- 65-0B B- 65-0A 65-5E 65-5C 65-5A 65-E 65-D 65-C 65-B 65-A 65-0C 65-0B 65-0A 65-2C 65-2B 65-2A SA2 SB2 SA2 SB2 MA2 L2 1 M2 1 M2 0 LA2 0 LB2,5 7 Q m /h m P 2 7, ,5 16 *,1,2,5,5,6,65,7 21,5,5 1*, 2,1,,5,6,,5 * *,,7,5* 5,1 5, ,5 2 2,5 * 17*,5 5 5,25 5,7 5, 6,1 6,25 6,5,5, *,,,5,65, 5,1 5, ,5 2,5 * 5, 5, 6,1 6,25 6,6 6, 7,25 2,5 2 2,5 2 26,5 6, 6, 7,1 7,5,,5 2,5 2 1,1,5,,5,5 7 6,5 6 5, 5,7,1,7,2,5 2,5 1,5,,6,1, 1,2,5,5 6,5,5 1 1,, 56, ,6 1,,7 16, ,5 6 6* 60* 5, 16,2 17,1 7,5 7 7,5 7* 77* *,2 21,, 2, 2,7 26 0,5,5* * 6* 2, ,2, 2,5 2,5*,65 2*,5 *, * 1,,5* 16, 51*,6 * 21 72*,7,5* 2,5 * 5,25 16,5* 2*,5 2*,,5*, 5* 1,6 2* 17,1,5*,5 * 67* 2, 7,5* 1* * * *,6 1* 1, * 17,7 *, *,2 5*, * 21 1 PUMP POMPA B- -E -D -C -B -A B- -0B -0B B- -0A -0A B- -2E -2E B- -2D -2D B- -2C -2C B- -2B -2B B- -2A -2A B- -0E -0E B- -0D -0D B- -0C -0C B- -0B -0B B- -0A -0A B- -2B -2B B- -2A -2A Standard construction. B- Bronze construction. SB2 MA2 MA2 L2 1 M2 0 LA2 1 M2 0 LA2 0 LB2 5 M2 2 M2 L2 1 M2 0 LA2 0 LB2 5 M2 2 M2 2 S2,5 7 5,5 7 5 Q m /h m P P Pump power input ,,5 1* 16,5* 1 1* 6, 7,1 7, 7,7 7,,1, 2 21*,5* * * 7,5,05,5,5,1 5,5 2 26,5 2* 2,5* 2* * 16,6,,,6, 1 1,7,5 2,5* 2* 1* 2* 2* *,, 1 1, 1, 1,6,5 7* 6,5* 6* * 2* 2* 1, 1 16,2 16, 17,7,,5 6,5 6,5,5* 2* * * 2*,7 16,6 17,7,6,,2 21, 21, * 52*,5* 6* * 2, 2,5 2,7 25,7,2 2,5 2, 51,5 6,5,5* 2* * * 2* 16,2 17,1,2,1,6 21, 21, ,5 61 5* 56,5* 5* * 21,, 2 25, 26,5 2 2,6 2, ,5 6* 67* 6* 5* 2,6 26, 2,5 1 2,, 5,2,5 2,5 * 7* * 70,5* 2,7 2, 5 6,7, 0,1 1, 5,5,5 2,5 * 0* * *,7,1 0,5 2,7, 7, 5 * 2, 5* 5,7 67*,5* 5 1* 5* 6,2 6*,1 76,5* 5 2, * 25* 2*,1,7 16,6 17,2 1 17,, 6 5 2* 1* 2* 17,1 17,,5,5,2,7 2 21,6 5,5,5 2,5 * 0,5* *, 2, 25,1 26,2 26, 2 2, ,5 5,5*,5* *,1 2, 2,,,, ,5 60 5,5 5,5* 5* 56,5* 1 2,, 5, 7, , ,5* 67* 65* 0,6 2,1, 6, 7,,,5 1 0,5 0,5,5 * 7* 5* 52,5 5,5 6 6,5 6 6 *, 2,5*,5* 2, * 6, 5*,5 61* 52, 1* 7 * 2* 2,,5* 7 * 5 5* 5,7 * ,2 2,5, 67 7 Rated motor power output. Total head in m. * Maximum suction lift 1-2 m. Minimum positive suction head 1 m. Tel Fax
4 Coverage chart n = 1 1/min U.S. g.p.m Imp. g.p.m m ft m /h Q 0 l/min C 7 Tolerances according to ISO 06, annex A. Performance n = 1 1/min 2-5F 71 A 2-5D 71 A 2-5A 71 A 2-B 71 B 0,7 2-A 71 B 0,7 2-0B A 2-0A B Q m /h m P 2,,6,2, 5, 6 6,6,,6, 1, , 2, 2,7 2,6 2,5 2, 1, 0,0 0,07 0,051 0,0 0,05 0,06 0,067 0,07 0,0 0,0,6,5,,,2,1,,5,2 2,6 2 0,07 0,0 0,0 0,05 0,0 0,05 0,1 0,5 0,5 0, 0,1 0,1 5,7 5, 5, 5,2 5,1 5,,5, 0,0 0,1 0, 0,5 0, 0,5 0,1 0, 0, 0, 0,16 0,17 7, 7, 7,2 7,1 6, 6,7 6, 5, 5,2,2 0,1 0,1 0, 0,16 0,17 0, 0, 0,2 0,21 0,2 0,2,5,,,7,6,5, 7, 6, 6 5,1* 0,17 0, 0, 0,2 0,21 0, 0,2 0,2 0,26 0,5 0,2 0,5 0,,5,, 1,,6,2,6, 6,2*,7* 0,2 0, 0, 0, 0,5 0,6 0, 0,1 0, 0, 0,5 0,5 1, 1,2 1 1, 1,7 1,,,,,2,* * 0,5 0, 0,2 0, 0,6 0, 0,5 0,525 0, 0,61 0,65 0,6 B- 0-5F 0-5C 0-5A 0-C 0-B 0-A 0-0B 0-0A 0-2C 0-2B 0-2A 71 A 71 B 71 B 71 B A B 0 S 0 S 0 L LA LB Standard construction. Bronze construction. 0,7 0,7 0,7 Q m /h m P 5, 6 6,6,,6, 1,2 16,, , 0,,6 0, 5,7 0,16 6,1 0,17 0,,6 0,2 1 0,51 1, 0,5 17, 0,6 21, 0,0, 1,06, 0,,6 0, 5,7 0, , 0,2,6 0,, 0,5 1,7 0,6 17, 0,7 2 0,2, 1,, 0,7,5 0,16 0,17 5, 0, 0,2,6 0,1, 0,5 1,6 0,6 17,2 0,7 21, 0,, 5,7 0,,5 0, 0, 5, 0,2 0,26,6 0,,7 0,5 0,61 17,2 0,77 21, 1,025,,6 0,, 0,162 0, 5, 0,21 0,, 0,5,6 0,57 1, 0,6 17 0,17 21,2 1,0, 1,26 6,5 0,16, 0,171 0,2 0,2 7, 0,2, 0,7, 0,60 1,2 0,67 16, 0, , 6, 0,,2 0,17 5, 0, 5, 0,2 7,1 0,1,1 0, 1 0,6 1,2 0,71 16,6 0,, 1, 1,5,0 0,16,0 0,7 5, 5,2 6, 0,2 0,2 0,66 1 0,7 16, 0,67, 1, , 0,1, 0, 5,1 5 0,26 6,6 0,, 0, 1 0,6 1, 0, ,0,5 1, 21 2, 0,2, 0,0,,5 0, 6, 0,6, 0,7, 0,71 1,6 0,,1 1,02 1,05 21, 1,6 Rated motor power output. Total head in m. * Maximum suction lift 1-2 m. P Pump power input. 1, 0,2,0 0,5, 0,0, 0,2 5,7 0, 7, 0, 1 0,5 1,,5 1,2 21, 1,7 2, 0,7, 0,,1 0,2 5 0, 7,2 0,51,6 0,7 1 0,,1 7, 67, 1,17,2 2, 0, 0, 6, 0,5 7 0,1, 0,, 1,2 16, 1,65, 1, 2,7 0,1 5,1 0, 0,7 7,2 1, 1,2 16 2,06,5 0,56 2, 1, 1,,6 2,16 Tel Fax ,7 67
5 Performance n = 1 1/min B- B- -0C B- -0B B- -0A B- -2C B- -2B B- -2A B- -2S -5F 71 B -5D A -5A B -5S B -B 0 S -A 0 S -0C 0 S -0B 0 L -0A LA -2C LA -2B LB -2A 2 M -2S 2 M 0,7 Q m /h m P, 1,2 16,, , ,2,1,1,0 0, 5,2 0,2 5,2 0, 5,2 0,2 5,1 0, 6,2 0,2 6,1 0, 6,1 0,2 6,0 0,2 6, 0, 6,7 0,6 6,7 0,5 6,6 0,66,2 0,2,2 0,,2 0,,1 0,,6 0,6,6 0,6,6 0,52,5 5, 0,57, 0,600,7 0,62,7 0,617 1, 0,67 1, 0,62 1, 0,7 1, 0,772 1, 0,7 1, 0, 1, 0, 1, 0, 0,2 1, 0,62 1, 1,0 1 0, 17, 0,6 17, 0,2 17,7 0,0 1 1,01,7 1,,7,7 1,25,6 1,7,7 1,7,7 1,,6 1 1, 61 1,62 1,72,,7,5 6 5,0 0,26, 0,,6 0, 5, 0,5 5, 0,7 0,05 6,5 0,26 6, 0,6 6,2 0, 0,71 7, 0,5 5,5 0,5, 0,6,1 0, ,705, 0,72, 0,1, 0,1,6 0, 1, 0, 1,6 1,051 1, 1,07 1,7 5 1, 1 1,0 17,2 1,0 16, 60 16, 1,2, 1,7 1,65,5 1,6, 1,71,1 1,7 21,6 1,25 1,5 2,02,2 2, 2, 0,21, 0,22, 0,21, 0, 5, 0, 5,0 0,,5 0,6 6,0 0,6 0,5 5,2 0,52 7,2 6,7 6,2 0,6, 0,671, 0,6 7, 0,77, 0,, 0, 0,,1 0, 1 0,57, , 1,21, 1, 1,2 1,0,7 1,2,7 1,0 1, 1,6 1, 5, 1,6,2 1,700 17,1 2, ,1,2 1, 2,6 2 2,5 1, 0, 2, 0,, 2, 0,,6 0,,6 0,56 0,561,, 0,62 7,2 0,67 6,1 0,67, 0,,1 0,62 6, 0,61,7 0,7, 1,005,2 1,0 6, 1,251 1,, 1,2,6 1,6,1 5 5, 76 2, 1,5,,7 1,6 6, 1,7, 1, 1,2 1,,6 2,, 2, 16, 2,5 1,6 2,7 2,706 2,,1 0,, , 2,5 2, B- B- 65-0B B- 65-0A B- 65-2B B- 65-2A 65-5E 65-5C 65-5A 65-C 65-B 65-A 65-0B 65-0A 65-2B 65-2A 65-C 65-B 65-A B B 0 S 0 S 0 S 0 L LA LB 2 M S S MA MB Q m /h m P , ,,,2,, 2, 0, 0,1 0, 0,5 0,6 0,65 0,7 5, 5, 5,2 5,, 0,51 0,5 0,56 0,5 0,6 0,62 0,6 0,6 6, 6,2 6,1 6 5, 5,2 0,6 0,66 0,65 0,71 0,76 0,7 0,7 0, 6, 6,2 6,1 6 5, 5,, 0,5 0,62 0,65 0,6 0,7 0,7 0,77 0,1 7, 7, 7,2 7 6, 6,5 6 0,71 0,76 0, 0, 0,7 0,2 0,6 1,,,7,6,,1 0,1 0,7 1,02 1,07 2 1,2 1,2,,,7,6, 1,,2 1,25 1, 1, 1,7 1,62 1,6 1,7 1 1, 1, 1,7 1,,6 7 1,66 1, 1, 1,1 2,02 2,1 2,02 21, 2,7 25,, 1,7 5,, 0, 5, 1,0 6, 1, 17, 17, 17,7 1 17, 16, 16,, 2,1 6 2, 2,5 2,66 2, 21,7 21,6 2 21,2,,2 21, 2,,02,16,,52,72,7 2 25, 25 2, 2,, 25,7,1,,67,,05,25,5,,,6,2 2,7 2, 1,2,5,65,5 5, 5, 5, 5, 5, 5,7 5,1,6, 5,1 5, 5, 6, 6,5 6,,1 0,, 1,0 6,2 1,,5* 1,05 5,*,* 1, 1,,5,7 7,* 1,6 1, 1,, 1,2* 2,5 2,6 2,56 1, *,,6,5,5,5 1*,,,6 2,2*,,6 5,, 26,5 25* 6,1 6, 6,65 2, 1,6,2* 7, 7, 6,2*,* 2 2,* 7,2* 2,65 2,7,*,5*,6,2,*,*,1 5, * * 5, 5, 2*,6* 7 7,2,*, 25*, B- B- -0C B- -0B B- -0A B- -2C B- -2B B- -2A -C -B -A -0C -0B -0A -2C -2B -2A -C -B -A -00C -00B -00A 0 S 0 L LA LA LB 2 M 2 M S MA MB M L 1 M 1 L 0 L,5 Q m /h m P 7, , 5, 5,2 5,,6,,,1 0,7 0,1 0, 0,7 0, 0, 0,5 0,6 0,7 6,7 6,6 6,5 6, 6,1 5, 5,2,6,7 1,02 1,05 1,2 1, 1,2 1,2,6,5,,,5,1 6,7 5,2 1, 1, 7 1,6 1,72 1, 1, 1, 2,02 2,07 2,1,,2,1,,5,1,6 7,7 6,6,6 6 1,62 1,7 1,77 1,6 1, 2 2,06 2,1 2,,1,,,7, 1,6, 5,7* 1, 1, 2 2,1 2 2, 2, 2,52 2,62 2,6 2,72 2,72 1, 1, 1,7 1,6 1, 1,6,,6 7,* 6* 2,1 2 2,5 2, 2,65 2, 2,,05,2,5,,6, 16, 16, 16,7 16,6 16,,, 1, 1,,7 1,* 7,2* 2,7 2,5 2,65 2,,2,5,,6,,7,,,7,6,5,,,6,1,2 17,1, *,* *,25,,5,,2,2,6,7 5,1 5, 5 2,7 2,7 2,6 2,5 2, 2,7 2 2,5 17,2*,1*,7*,,1,,5, 5,0 5, 5,1 6,2 6,5 6,2 6, 7,05 2, 2, 2,7 2,6 2,,, 26, 25, 2,6,6,* 17,* *,6,5 5, 5, 6,2 6,5 6,2 7, 7,5,5,,05 2, 2, 2,1 1, 1,6 1,2,7 2, 2, 25,1*,* * 5,7 5, 6,2 6, 7 7,5,2,7,,, 7, 7, 7, 7,2 7,1 7 6,7 6,,7,2 1,* 2* 26,* 6,7 6,77 7, 5,25,5,5,,,25,1, 1 6,5 6, 6,1 5, 5,2,5,5 2, 0 7,2 2,5 26,2*,5*,,25,5,25,, 1,2 1,5 1, 1 16, , 5, 5 52, 51,6,6,7 6,1 2 6,5* 2,5* 21* 1,,5 1,5 1,7 1 16, 1,,5,6 25, 6 61, 61, 6 60, 60,2 5, 5, 56,5 5,5 * 0* 2,5*,65 1,2 1 1,7,6 16,5 17,,25,,,1 2,5 2, B- Standard construction. Bronze construction. Rated motor power output. Total head in m. * Maximum suction lift 1-2 m. P Pump power input. 7 Tel Fax
6 Performance n = 1 1/min B- B- -0C B- -0B B- -0A B- -2B B- -2A -0C -0B -0A -2B -2A -C -B -A -00C -00B -00A LB 2 M S MA MB M L 1 M 1 L 0 L 5 S,5 7 Q m /h m P ,,,1,,5 7, 6,5 * 2,1 2, 2, 2,5 2,6 2,7 2, 2,5 2, 2,5,,,7 1,2,7,, 6,7*,5* 2,65 2, 2,5,1,,5,65,5,5,5,,2,2,1 1, 1,7 1, 1, 1,7* *,65,5,,,6,5 5,1 5, 5 5,5,5,,,7,2 1 16,6,6 1,*,7*, 5 5,2 5, 5, 6,05 6, 6,7 7 7,,, 2,1 21, 21,7 21,2,5,, 17,1* * 5, 6,05 6,25 6,6 6,5 7,,1,5,7 26, 26, 26, 26,6 26,2 25,7 2, 2,,7 21,,*,* 6,6 7 5,1,5,5,5,2,7, 1, 1, 1,2,,2 2, 2,2 26, 2,6* 21,* 7,,25,65,6,2, 1,1,6 1, 1, 6, 6, 6, 6,7 6,6 6, 6 5,,5, 1,* 2*,7,2,7,2,,5 1, 1,,6 16,6 17, 1, 1,2 1 0,7 0,, 6,5 * 1* 1,,5 1,2 1 1, 16 17, 21,2,1,,7,, 7,1 6 * 1,*, , 17,,,,6 21, 2 25,7 5,2 5,1 5 57, 57, 5 57,2 56,,7 52,7*,5* 17,,,7,5 21,7, 2, 25,, 2,, 2,7 * 5 * 1,*,05 1,7*,*,2* 6* 5,*,7*,* 1* 1, 25,*, 17, 2,7* 26* 21,7,5*, *,5 7* 2,5 7* 5 2 * 7,,*, 1* 1, 2*,,5* 2, * 6,5 B- B- 5-2E B- 5-2D B- 5-2C B- 5-2B B- 5-2A B- 5-C B- 5-B B- 5-A 5-2E 5-2D 5-2C 5-2B 5-2A 5-C 5-B 5-A 5-00C 5-00B 5-00A S MA MB M L 1 M 1 L 0 L 5 S 5 M 2 M,5 7 5 Q m /h m P ,,5,1,7,1, 7, 7,2 6,2,*,2,5,,5 5,05 5,2 1 1, 1,7 1, 1,,6,, 7,* 5,1* 5, 5,7 5,5 6,2 6,5 6, 7 7,1 7,2 7, 7,1 16,7 16,6 16, 16,2,, 1,6,5,*,2* 5,* 6, 6,7 7,1 7, 5,05,,6,,05, 1,1,,7, ,, 1,*,*,2* 7,,25,7,1,5,5,6,5 1, 1,,7,7,6, 2 21, 21,2,,1, 17,* *,*,*,,,5,,6,5 1,25 1, 1, 5 1,,,,7,6,2 26,5 2 2, 2,,2* 17* *,5* 1,, 1, 1 1,7,, 16,2 16,7 17, 17,7 1, 1,7 1,6,6 2,7 2,1 2,5, 2,* *,5* 1,*, 1,6,, 16, 17,7,,7,6 21,,1 6, 6, 6,7 6,6 6, 5, 5,2,7,2,2 1* 2,* 25,* 21,6* 1 16,5 1,,1, 21,6, 2,1 2, 2 26,6,6 2,5 5, 5, 5,2 5,1,,, * * 2,5* 2,5*,,7 2, 2,6 26,5 2,2 2,,2 1,, 5 5, 6, 51, 51, 51,2 5,,,7,2 6, * 0,5* 6* *, 2, 25,7,1 2,,5,, 6,5 1,5 5 5,1 5 5, 5,7 5,2 57,7 57,2 56,7,7 *,5* 6,5* 2,5*, 2,, 2,, 6,2,, 1,2,2 6,2 52,1 5, B- B- 1-D B- 1-C B- 1-B B- 1-A 1-D 1-C 1-B 1-A 1-00C 1-00B 1-00A 1 M 1 L 0 L 5 S 5 M 2 M 2 S,5 7 5 Q m /h m P ,,6, 21,7 2,6 17,1 1,6* * 1,,, 16,2 16, 1,5,5,, 2 25, 25,1 2, 2,7 2,,,5 16,5 *,6*,*,6 16, 17,2 15,1,,7,6 21, 21, 21,65,6,6,5,,1 2,7 2, 26,5 2, 2,*,*,* 21 21,6, 2 2,5 25,7 26,6 2 2,1 2,7 2, 2 5, 5, 5,2,6,7 2,5 1 2,1* 2,7* 21,* 2,1 2, 25,7 26,5,2 2, 1,6,1, 5, 6, 7 5,,7,5,5 2,5 0,5,5 6,5,5* * 2,5*, 2,65 1, 2,6, 5, 7,7,7 1, 2,7,,1,1,,7,5,,5, ,5 * 5* 2* 1,,6 5, 6,,2 0 2, 7,7, 5 5 5,1 5, 5,7 5,5 5, 57, ,5 7* * 1*,2 0,7 2,,5 5,7 5 5, 57,1 5,7 62 6, ,5* 7,,5* 2,5* 5, * 6, B- Standard construction. Bronze construction. Rated motor power output. Total head in m. * Maximum suction lift 1-2 m. P Pump power input. Tel Fax
7 a D2 f x l1 l2 l h1 h2 D1 t, Dimensions and weights.. m2 m1 w s1 1 1 n2 n1 b Shaft extension ISO 7 Parallel key UI 660 Flanges P, E 2-2 u d l u t C D C K D oles g2 d.. 2 j6 2 k6 2 k6 1 n = 200 1/min n = 1 1/min g2 D K D Ø TIPO TYPO, 2-5, 2-, 2-0, 0-5, 0-, 0-0, 0-2, -5, - B-, B- -, -0 B-, B- -, -2 M, 65-5, 65- B-, B- -, 65-0 B-, B- -, , - B-, B- -, -0 B-, B- -, -2 - B-, B- - B-, B- - B- - B- - B (1, -0, D1 D a f h h l l m1 m n1 n b s1 d w x kg B- B-,7,2,,1 0,5 62, 5, 52, 6, 66 51,6 52, ,5 2, ) Additional size Tel Fax
8 Dimensions a D2 f T l n = 200 rpm D1 h2 A d h h POMPA TYPO L B2 - A2 - B2-0 S B-, -0 B-, -2 M B-, 65-0 B-, B-, -0 B-, -2-2 B-, -0 B-, -0 B-, -2-0 S2 - - L2 - - L2 - - SA2 - B2-0 S L SA2 - SB2 - MA L2 - - SA2 - SB2 - MA L L2 - - SA2 - SB2 - SA2 - SB2 - MA L2-1 M2-1 M2-0 LA2-0 LB2 - SB2 - MA L2-1 M2-0 LA2-1 M2-0 LA2-0 LB2-5 M2-2 M2 - L2-1 M2-0 LA2-0 LB2-5 M2-2 M2-2 S2,5,5,5 7,5 7 5,5 7 5 L2 L1 D1 D2 a..070 f L h2 B B2 B2 < 00 L1 L2 L B2 B B2 B2 > B A h d T l Tel Fax
9 Dimensions n = 1 rpm POMPA TYPO B B B B B B B B B B B A - 71 A - 71 A - 71 B - 71 B - A - B - 71 A - 71 B - 71 B - 71 B - A - B - 0 S - 0 S - 0 L - LA - LB - 71 B - A - B - 0 S - 0 S - 0 S - 0 L - LA - LA - LB - 2 M - B - B - 0 S - 0 S - 0 S - 0 L - LA - LB - 2 M - S - S - MA - MB - 0 S - 0 L - LA - LA - LB - 2 M - 2 M - S - MA - MB - M - L - 1 M - 1 L - 0 L - LB - 2 M - S - MA - MB - M - L - 1 M - 1 L - 0 L - 5 S - S - MA - MB - M - L - 1 M - 1 L - 0 L - 5 S - 5 M - 2 M - 1 M - 1 L - 0 L - 5 S - 5 M - 2 M - 2 S 0,7 0,7 0,7 0,7 0,7 0,7,5,5 7,5 7 5,5 7 5 D1 D2 a f h2 L1 L L B2 B A h d T l 51 Tel Fax
10 , Interchangeability of parts TYPE, 2-5, 2-, 2-0, 0-5, 0-, 0-0C, 0-0A-AR-B, 0-2, -5, -, -0, -2 M, 65-5E, 65-5A-C, 65-, 65-0, , -, -0, , -0, Bearing housing Pump shaft Ball bearings Shaft sealing 1 2 I II III IV V 67 Z 66 Z 67 Z 6 6 Z 6 Z ø 2 ø 0 ø Maximum permissible rotation speed rpm 00 rpm 10 rpm M Suction pipe: recoended minimum inside diameter (D) for different capacities (Q) Threaded pipe G 2 G 2 1 /2 D Q max m /h,5 2, Tel Fax
Self-Priming Pumps. Characteristic curves for suction lift Hs = 1 m. n 2900 rpm. H m. H m 50 Q 3
www.calpeda-romania.ro 7..9 www.pompe-calpeda.ro 7.79. Construction Close-coupled self-priming shallow well jet pumps with built-in ejector. NG: version with pump casing and lanter bracket in cast iron.
CP Centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS PATENTS - TRADE MARKS - MODELS CONSTRUCTION AND SAFETY STANDARDS
CP Centrifugal pumps PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 74 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
Aqueducts Irrigation Water distribution Industrial applications APPLICATION DATA
NOCCHI NRB STANDARDIZED CLOSE COUPLED CENTRIFUGAL PUMPS (2-4 POLE) RUGGED AND RESISTANT, WIDE RANGE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 The electric pumps
Centrifugal pumps. PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 76 m
CP Centrifugal pumps Clean water Civil use Agricultural use Industrial use PERFORMANCE RANGE Flow rate up to 9 l/min (5 m³/h) Head up to 76 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
CENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
MONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron
Cast iron monobloc centrifugal electric pumps in compliance with EN 733. APPLICATIONS Moving clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants
SF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
MZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
NRB CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING. NORMALIZED DIMENSIONS DIN UNI EN733
NRB CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING. NORMALIZED DIMENSIONS DIN 5 - UNI 77 - EN7 99 NRB HORIZONTAL CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING (2 AND POLES) NRB pumps, centrifugal single
Vertical multi-stage pumps
MK Vertical multi-stage pumps PERFORMANCE RANGE Flow rate up to 180 l/min (10.8 m³/h) Head up to 103 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +40 C Ambient
AL-RED. Stainless steel centrifugal pumps
AL-RED Stainless steel centrifugal pumps AL-RED -4 Pump body: stainless steel AISI 304 Impeller: stainless steel AISI 304 Shaft: stainless steel AISI 431 AL-RED -6 Pump body: stainless steel AISI 316L
Page - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
Data sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
NM, NMS 60 Hz NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions.
, S z lose oupled entrifugal ups Materials oponents, S, S up casing ast iron ronze Lantern bracket asing cover for S GJL N Gu Sn N Lantern bracket S ast iron GJL N Ipeller ast iron ronze GJL N Gu Sn N
SF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
2CP Twin-impeller pumps
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 450 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C (up to +40
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
DWK.E D.R
GRUNDFOS DATA BOOKLET DWK.E.1.15.55.5.1D.R Grundfos Pump 96922755 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/dwk/96922755/dwk-e-1-15-55-5-1d-r.html
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
Contents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
SMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
AGA-AGC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00 205 PERFORMANCE CURVE
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
CVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS
CENTRIFUGAL PUMPS CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 PERFORMANCE CHART CMA 0.50 203 PERFORMANCE CHART CMA 0.75 204 PERFORMANCE CHART CMA 0.80 205 PERFORMANCE CHART
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
EVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage
Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811
- CONSTRUCTIONS 300 SECTIONAL VIEW (4N1 4N2 4N4) 300 SECTIONAL VIEW (4N7 4N10 4N15) 301 SECTIONAL VIEW TABLE 302 ITEM QUANTITY FOR MODEL 303
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 TYPE KEY 203 PERFORMANCE CHART 4N1 204 PERFORMANCE CHART 4N2 205 PERFORMANCE CHART 4N4 206 PERFORMANCE CHART 4N7
ILN, ILNC. In Line vertical pumps. ILN single suction ILN double suction ILNC. 1. Fields of Application. 3. Design. 4. Designation. 2.
Type series booklet CTI-2600/04 [04-2017] ILN, ILNC In Line vertical pumps ILN single suction ILN double suction ILNC sizes 65/ to 250/... sizes 300/ all sizes 1. Fields of Application Suitable for a wide
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
GRUNDFOS DATA BOOKLET NS, PF. 50 Hz
GRUNDFOS DATA BOOKLET 50 Hz Table of contents 1. PF 3 General description 3 Features 3 Constructional features 3 Material specification 3 Marks 3 Technical data 4 Performance curves 4 Dimensions 5 Product
6-8 Stainless Steel Submerged Centrifugal Pump
6 & 8 BHE(L) 6-8 Submerged Centrifugal Pump IMENSION PUMP 8BHE 77 imension (mm) 86 BHE 77-2 86 BHE 77-3 86 BHE 77-4 86 BHE 77-5 86 BHE 77-6 86 BHE 77-7 86 BHE 77-8 86 BHE 77-9 86 BHE 77-10 86 BHE 77-11
XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
CMA - B - C - D - CMR
Cast iron single impeller centrifugal electric pump. APPLICATIONS Pressure boosting domestic plants Smallscale irrigation Pumping nonaggressive liquids for civil and industrial use Washing plants Washing
Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
CMA - B - C - D - CMR
Cast iron single impeller centrifugal electric pump. APPLICATIONS Pressure boosting domestic plants Smallscale irrigation Pumping nonaggressive liquids for civil and industrial use Washing plants Washing
- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
SKM-D. Multistage Centrifugal Pumps TS EN ISO 9905 ST 02/ EN ISO 9001
Multistage Centrifugal s KM T EN IO 9905 T 02/04.033 EN IO 9001 General information KM Handled Liquids : KM pumps are suitable for clean liquids with low viscosity. Technical ata ischarge Nozzle Range
WINNER SUBMERSIBLE MULTISTAGE PUMPS EPA
CONTENTS SPECIFICATIONS Page Features & Applications 100 E xploded View 101 Pump & Motor Specifications 102 Selection Charts 103, 104 Type key 105 PERFORMANCE CURVES Performance Curve 4N1 200 Performance
2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
MATERIALS ORIENTATION OF THE SUCTION AND DELIVERY CONNECTORS:
KV 3-6-1 MULTISTAGE VERTICAL CENTRIFUGAL ELECTRIC PUMPS WIT COUPLING TECNICAL DATA Operating range: fro 1,8 to 13,5 3 /h with head up to 139 etres. Puped liquid: clean, free of solids and abrasives, non-viscous,
VM, VMC, VMN. Vertical Multistage Centrifugal Pump, 60Hz
VM, VMC, VMN Vertical Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Whole Company Design,
Founded in 1974 Pedrollo Spa is now a reference mark globally in the water supply sector.
Founded in 1974 Pedrollo Spa is now a reference mark globally in the water supply sector. Covering an area of 6, square metres the Company utilises extremely high technology with a high level of automation
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 PERFORMANCE CURVE 1.50 205 PERFORMANCE CURVE 2.00 206
TOP MULTI. Submersible multi-stage pumps TOP MULTI 1 TOP MULTI 2-3. PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 42 m
TOP MULTI Submersible multi-stage pumps Clean water Domestic use Civil use TOP MULTI 1-3 PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 42 m APPLICATION LIMITS Immersion depth: up to
2 EURO PUMP SETS. GENERAL DATA Applications. Construction features - components
2 EURO PUMP SETS GENERAL DATA Applications Booster sets specifically suitable for domestic applications and small systems for civil, agricultural or industrial uses. These sets are acclaimed for their
PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
STANDARDIZED MONOBLOC CENTRIFUGAL PUMPS (2-4 POLE) RUGGED AND RESISTANT, WIDE RANGE, HIGH HYDRAULIC PERFORMANCE
NOCCHI NRM RUGGED AND RESISTANT, WIDE RANGE, HIGH HYDRAULIC PERFORMANCE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 The pumps in the NRM series are monobloc single
PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation.
SKD SERIES PRODUCT DESCRIPTION AND TECHNICAL DATA PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. APPLICATION Water supply systems,
franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
Standard SO according to DIN
Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
Stainless Steel Centrifugal Pump Type 3 SERIES
PUMP Stainless Steel Centrifugal Pump Type APPLICATIONS Water supply to civil, agricultural and industrial plants Pressure boosting Fire-fighting, heating systems and air-conditioning Moving industrial
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
(%$5$ PUMPS EUROPE S.p.A. &(175,)8*$/38036':2. &217(176 50Hz
&(175,)8*$/38036':2 &217(176 50Hz Page 63(&,),&$7,216 200 SELECTION CHART 201 PERFORMANCE CHART 150 202 PERFORMANCE CHART 200 203 PERFORMANCE CHART 300 204 PERFORMANCE CHART 400 205 &216758&7,216 300 SECTIONAL
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
PUMPS SURFACE C ATA L OGU E SURFACE PUMPS
SURFACE C ATA L OGU E PUMPS SURFACE PUMPS www.vansan.co.za IDB Series Peripheral Pumps 8 ISO2548-C 22V/5HZ 6 4 2 5 1 2 25 35 4 45 l/min IDB4 IDB35 IDB6 IDB7.3.6.9 1.2 1.5 1.8 2.1 2.4 2.7 m 3 /h Ampere
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.50 203 PERFORMANCE CURVE 0.80 204 PERFORMANCE CURVE 1.00 205 PERFORMANCE
Norm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
abcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
Matrix_Techdata_SS_V14
Matrix_Techdata_SS_V4 CONTENTS V4 SPECIFICATIONS Page Features & Applications Typical Exploded View Pump & Motor Specifications Selection Chart / Type key 3 Selection Chart 4 PERFORMANCE CURVES Performance
INDUSTRY APPLICATION. S -pumps are used in: Industry Waste treatment Environment protection Construction industry Civil engineering
INDUSTRY APPLICATION Self-priming centrifugal pumps of type S are used for pumping clean and contaminated liquids containing solids. The special design makes them suitable also for abrasive liquids. S
- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO
CONTENTS Page - CONTENTS CONTENTS 100 - SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS CONSTRUCTIONS 300 CONSTRUCTIONS 301 CONSTRUCTIONS
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for
M50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
High-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
TRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
MD - MMD. MONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron. Japanese Technology since Commercial
MD MMD Cast iron monobloc centrifugal pumps conforming to en 733. APPLICATIONS Handling of clean water for civil, agricultural, industrial uses and for pressurisation units, heating plants and air conditioning
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM Description Range : Delivery size up to 150 mm Capacity up to 470 m 3 /hr Head up to 180 metres Application : Suitable for Water Works, Circulation
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
Data sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 076 203 PERFORMANCE CURVES 106 204 - CONSTRUCTIONS 300 SECTIONAL
Side Channel Pumps Self-priming, segmental type
Side Channel Pumps Self-priming, segmental type AKH 1101 6103 Technical data Capacity: from 0,2 up to 35 m³/h Head: from 6 up to 144 m Speed: 1450 rpm (max. 1800 rpm) Temperature: max. 120 C Casing pressure:
TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
Data sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
Data sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
Pumps Motors ISO 9001 Company
SERIES DATA BOOKLET EndSuction Centrifugal Monoblock Pumps 6 Hz Pumps Motors ISO 91 Company Pumping Solution Contents Endsuction centrifugal monoblock pumps Product data Introduction Applications Features
Bristol: A History & Future.
Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has
Page - DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
EVOTRON SAN WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA
EVOTRON SAN TECNICAL DATA Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class: