A Special unit for Water Injection Dredgers by Mr. Gert de Vries B.Sc., Vuyk Engineering Rotterdam BV, Netherlands and Mr. Jorne Beyen B.Sc., Deme NV,
|
|
|
- Dorcas Dickerson
- 5 years ago
- Views:
Transcription
1 A Special unit for Water Injection Dredgers by Mr. Gert de Vries B.Sc., Vuyk Engineering Rotterdam BV, Netherlands and Mr. Jorne Beyen B.Sc., Deme NV, Belgium
2 Types of Water Injection Dredgers Type A1: the Water Injection Dredger with centreline well Page: 2
3 Types of Water Injection Dredgers Type A2: the Water Injection Dredger in catamaran-like execution Page: 3
4 Types of Water Injection Dredgers Page: 4 Type B: the Water Injection Dredger with water injection pipes in a U-shaped unit
5 Predecessors multi-purpose work vessel Alligator Length o.a. Breadth o.a. Depth Draft Bollard pull m m 3.50 m 3.20 m 25 ton Installed power ± 868 kw Built in 1984 Page: 5
6 Predecessors tug Geer Length o.a. Length p.p. Breadth Depth Engine Bollard pull m m 6.90 m 3.45 m 1180 HP 11.5 ton Built in 1954 Page: 6 Tug Geer
7 Predecessors tug Geer Page: 7 View on the bed level frame
8 Design of Water Injection Dredging Set Design conditions for water injection dredging unit Modular design Reduced weight Self-priming design Separate hydraulic pack for winches and eventually wave compensator Page: 8 Design conditions for vessel Sufficient deck space Good manoeuvrability Space for gantries and winches Rigid hull connection Pontoon-shaped hull form
9 Design of Water Injection Dredging Set Aft view on water injection dredger Page: 9
10 Design of Water Injection Dredging Set Arrangement for water injection dredging Page: 10
11 Design of Water Injection Dredging Set Page: 11 Touching of the WID head during roll motions in seagoing conditions
12 MULTI PURPOSE DREDGER (multi functional) Looking at the equipment of the WID equipped multi purpose vessel, some other ideas come up: the hydraulic crane could be equipped with a grab or with a dredge pump unit or with a small auger dredge unit Multi-purpose dredger with grab Page: 12
13 MULTI PURPOSE DREDGER (multi functional) Multi-purpose dredger with auger unit Multi-purpose dredger with submerged dredge pump unit Page: 13
14 MULTI PURPOSE DREDGER (multi functional) Multi-purpose dredger with grab Page: 14
15 Conversion from Multicat Parakeet to Water Injection Dredger Length o.a. Breadth Depth m m 3.75 m Installed power kw Bollard pull 16.7 ton Built in 1997 Page: 15
16 Conversion from Multicat Parakeet to Water Injection Dredger The fishermen dry-dock in Kakinada, India ready for service Page: 16
17 Conversion from Multicat Parakeet to Water Injection Dredger Arrival of the conversion kit at the yard to perform a timeeffective conversion. Page: 17
18 Conversion from Multicat Parakeet to Water Injection Dredger Lifting of the outer frame s aft part. Page: 18
19 Conversion from Multicat Parakeet to Water Injection Dredger Assembling of the outer frame. Page: 19
20 Conversion from Multicat Parakeet to Water Injection Dredger The Parakeet in dry-dock with already mounted outer frame. Page: 20
21 Conversion from Multicat Parakeet to Water Injection Dredger The hull opening for the central moonpool under construction. Page: 21
22 Conversion from Multicat Parakeet to Water Injection Dredger Assembling of the outer frame. Page: 22
23 Conversion from Multicat Parakeet to Water Injection Dredger The passive swell compensation system, installed on the aft deck Page: 23
24 Conversion from Multicat Parakeet to Water Injection Dredger Testing of the system in full progress Page: 24
25 Conversion from Multicat Parakeet to Water Injection Dredger Page: 25
26 Conversion from Multicat Parakeet to Water Injection Dredger Testing of the system in full progress Page: 26
27 Conversion from Multicat Parakeet to Water Injection Dredger Jet bar with nozzles Page: 27
28 Page: 28 Results of Water Injection Dredging
29 ERROR: stackunderflow OFFENDING COMMAND: ~ STACK:
Cutter-/ suction dredger
PARTICULARS : Type Cutter suction dredger I Barge loading suction dredger. Name "Cornelis". Dimensions Minimum draught Length o.a. 61.80 m Length pontoon 47.02 m Width 9.93 m Depth 2.30 m 1.34 m Air draft
6. TSHD: TRAILING SUCTION HOPPER DREDGER
6. TSHD: TRAILING SUCTION HOPPER DREDGER BY PAUL VERCRUIJSSE Trailing Suction Hopper Dredger Chapter 6 - Trailing Suction Hopper Dredger - p. 1 Trailing Suction Hopper Dredger Jumbo 30,000 m 3 Small &
Introduction of AVIC International
Introduction of AVIC International Former China National Aero-Technology Import & Export Corporation (CATIC) reorganized to AVIC International Co. in 2009. CATIC was founded on Jan 21, 1979. State-owned
ECO 250 CUTTER SUCTION DREDGER
ECO 250 CUTTER SUCTION DREDGER RELIABLE BRANDS REPLACEABLE AUGER KNIVES OPTIMIZED PRODUCTION Dredge Yard +31 85 3035 866 www.dredgeyard.com MULTI-PURPOSE DREDGERS QUALITY FROM START TO FINISH Dredge Yard
Table of content. Project Details Page 3. In General Page 4. Main Particulars Page 5. General Arrangement Page 6
Table of content Project Details Page 3 In General Page 4 Main Particulars Page 5 General Arrangement Page 6 Propulsion / Electric Power / Dredge Equipment Page 7/8/9 Contact Information Page 10 2 Shipyard:
THE DESIGN OF ANCHOR ELEVATION PLATFORMS FOR CUTTER SUCTION DREDGE D ARTAGNAN
THE DESIGN OF ANCHOR ELEVATION PLATFORMS FOR CUTTER SUCTION DREDGE D ARTAGNAN LAST MEN STANDING G.A.P.L. Teheux 1, M. Lambalk 2 ABSTRACT When dredging hard materials with a cutter suction dredge (CSD),
Dredging Equipment EXECUTIVE SUMMARY DAMEN CUTTER SUCTION DREDGERS
EXECUTIVE SUMMARY DAMEN CUTTER SUCTION DREDGERS OVERVIEW CSD RANGE CSD 250 CSD 350 CSD 450 CSD 500 CSD 650 APPLICATIONS / OPERATION Typical applications - Maintenance - Sand mining - Capital dredging Typical
RAVESTEIN CONTAINER PONTOON. UK71
RAVESTEIN CONTAINER PONTOON www.rcpbv.com UK71 Welcome Ravestein Container Pontoon BV was established in 1988 in order to put the Ravestein Container Pontoon system on the market. RCP, located in Deest
specialized in modular PONTOON solutions for various purposes and applications
specialized in modular PONTOON solutions for various purposes and applications COMPANY Introduction / Market, rental, purchase or lease MPS is the exclusive manufacturer of MPS container pontoons and is
RULES FOR THE CONSTRUCTION AND CLASSIFICATION OF SHIPS IDENTIFIED BY THEIR MISSION DREDGERSAND MUD BARGES SECTION 3 HULL EQUIPMENT CHAPTERS APPROACH
PART II RULES FOR THE CONSTRUCTION AND CLASSIFICATION OF SHIPS IDENTIFIED BY THEIR MISSION TITLE 43 DREDGERSAND MUD BARGES SECTION 3 HULL EQUIPMENT CHAPTERS A B C D E F APPROACH DOCUMENTS, REGULATIONS
EXECUTIVE SUMMARY - TUGS ASD TUG 2810 DECEMBER 2015
EXECUTIVE SUMMARY - TUGS ASD TUG 2810 DECEMBER 2015 TUGS ASD TUG 2810 CHARACTERISTICS Main dimensions: Length over all 28.67 m Breadth over all 10.43 m Depth at side 4.60 m Draught aft 4.90 m Full displacement
INDEX. BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation. STRONG POINTS 7 Basic Design Spares & Services
DREDGING PUMPS 2016 BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation STRONG POINTS 7 Basic Design Spares & Services BELL HEADS 10 Sand production head Flat barge head
Cutter-/ suction dredger
PARTICULARS : Type Compact cutter suction dredger, used demountable dredger Dimension 9 x 2.5 x 1,2 m Draft Approx. 0.9 m Air draft Control cabin approximately 2.5 m. A-frame approximately 3.5 m but can
Bell PUMP 4 Overview Characteristics Production Applications/Areas Of Operation
DREDGING PUMPS Bell PUMP 4 Overview Characteristics Production Applications/Areas Of Operation STRONG POINTS 7 Basic Design Research Components/Principles Spares And Services Bell heads 10 Sand production
INDEX. BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation. STRONG POINTS 7 Basic Design Spares & Services
DREDGING PUMPS 2017 BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation STRONG POINTS 7 Basic Design Spares & Services BELL HEADS 10 Sand Production Head Flat Barge Bead
Backhoe Dredging Monitoring and
DipMate Pro Backhoe Dredging Monitoring and Control System Monitoring and control system for precision backhoe dredging underwater specialists dipmate pro seatools 1 Monitoring and control for maximum
INDEX. BELL PUMP 4 Overview Characteristics Production Applications/Areas Of Operation
DREDGING PUMPS BELL PUMP 4 Overview Characteristics Production Applications/Areas Of Operation STRONG POINTS 7 Basic Design Research Components/Principles Spares And Services BELL HEADS 10 Sand production
IHC Beaver 300 SE Cutter suction dredger
The IHC Beaver 300 SE is an extremely successful tried-and-tested vessel. The dredger is dismountable and can be easily transported to any location. With its robust design, it is the preferred choice in
Cybermarine Offshore Technologies LLC
Through the last 20 years, we at CYBERMARINE have been at the fore front of developing designs and providing engineering for asset owners, empowering shipyards and ship repair entities in adding value
EXECUTIVE SUMMARY - TUGS ASD TUG 3213 APRIL 2017
EXECUTIVE SUMMARY - TUGS ASD TUG 3213 APRIL 2017 CHARACTERISTICS Main dimensions: Length over all 32.44 m Breadth over all 13.29 m Depth at side 5.50 m Draught aft 6.30 m Full displacement 950 ton Power
BELL300 CUTTER DREDGER
Belldredgingpumps Technical Specification BELL300 CUTTER DREDGER BCD300-D250kW-12 3 Belldredgingpumps BELL DREDGING PUMPS Rijdersstraat 76 NL-1735GE t Veld Tel: +31 (0)6 53 38 78 45 info@belldredgingpumps.com
Parameters Affecting Selection of Dredge Equipment
Parameters Affecting Selection of Dredge Equipment EADA - 2017 RAKESH ROY COO, Naval Architect VEDAM DESIGN & TECHNICAL CONSULTANCY PVT. LTD. 504-506, Acropolis, Military Road, Marol, Andheri (E), Mumbai-59,
SOUND FLEET FACTS: SUSTAINED COMMITMENT, INCREASING CAPABILITIES
SOUND FLEET FACTS: SUSTAINED COMMITMENT, INCREASING CAPABILITIES SERVS MISSION To maintain a constant state of readiness to assist tankers in the safe navigation through Prince William Sound, and to provide
ECO 300 AUGER DREDGER
ECO 300 AUGER DREDGER EASY TRANSPORT ONE-MAN OPERATION HIGH PODUCTION Dredge Yard +31 85 3035 866 www.dredgeyard.com MULTI-PURPOSE DREDGERS QUALITY FROM START TO FINISH Dredge Yard designs and manufactures
TECHNICAL SPECIFICATION OF 10 INCH CUTTER SUCTION DREDGER
1 TECHNICAL SPECIFICATION OF 10 INCH CUTTER SUCTION DREDGER Ser Description Required Specification Remarks China Qingzhou JuLong ISO Certified A Manufacturer Dredging & Mining Enterprise Machinery Co.,
BACKACTER 1100 World s strongest dredge
BACKACTER 1100 World s strongest dredge Introduction Yard De Donge designed and build the strongest type of dredger; the Backacter 1100. The first very large dedicated marine dipperdredger excavator in
BELL BOOSTER STATIONS 16 Main Specifications INDEX
DREDGING PUMPS 2018 BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation STRONG POINTS 7 Basic Design Development Spares & Services BELL HEADS 10 Sand Production Head Flat
HUISDRILL DEEPWATER DRILLSHIP HUISMAN PRODUCT BROCHURE
HUISDRILL DEEPWATER DRILLSHIP HUISMAN PRODUCT BROCHURE RILLING GENERAL INTRODUCTION 2 Huisman offers complete drilling packages and is dedicated to explore and realise new solutions to improve drilling
YN TSHD MAIN FUNCTIONS
000 - MAIN FUNCTIONS Loading hopper with SB trailing suction pipe Emptying hopper through bottom doors Emptying the hopper through shore discharge connection on the bow Emptying hopper through a rainbow
CHAPTER 10 FLOATING WHARVES
CHAPTER 10 FLOATING WHARVES Both the US Army and Navy have floating equipment suitable for constructing floating wharves. The most promising equipment of each service is discussed below. Section I. Army
M/V OCEAN SUPPLIER. Vestland Marine Sp. z o.o. Chwarznieńska str 87E, Gdynia, PL. ME 303 Anchor Handling Tug Supply Vessel (AHTS), DPS-1
ME 303 Anchor Handling Tug Supply Vessel (AHTS), DPS-1 Vestland Marine Sp. z o.o. Chwarznieńska str 87E, 81-602 Gdynia, PL Genera Anchor Handling Tug Supply Vessel; DPS-1 GENERAL SHIPS NAME CALL SIGN C6VL3
DRILLING BARGE SS AMEQ CASPIAN SEA
DRILLING BARGE SS AMEQ CASPIAN SEA Convert Two Conventional Drilling Barges, Re- design and re-build to MODU DWF Specifications SS GRE Caspian MODU 1 and SS GRE Caspian MODU DWF reactivation; 6-8 months
8. The backhoe or Dipper dredger
8. The backhoe or Dipper dredger Figure 8. 1 BHD IJZEREN HEIN, 8. The backhoe or Dipper dredger...1 8.1. General considerations...1 8.2. Working method...2 8.3. Area of application...4 8.4. Main Layout...5
CHARACTERISTICS OF POLLUTION RESPONSE VESSELS FOR THE GULF OF FINLAND
CHARACTERISTICS OF POLLUTION RESPONSE VESSELS FOR THE GULF OF FINLAND OIL COMBATTING SEMINAR St. Petersburg Harri Eronen Kaj Riska March 2006 TASKS THE INCREASING OIL TRANSPORT IN THE GULF OF FINLAND MEANS
In a NabCat from Moen Marin, you will appreciate the high level of comfort, practical solutions and high technical quality
In a NabCat from Moen Marin, you will appreciate the high level of comfort, practical solutions and high technical quality Description: This description, with relevant set-up drawings, is for a catamaran
WEDA EASTERN CHAPTER MEETING GLDD S ATB ELLIS ISLAND & TUG D.B. MACKIE. Eastern Shipbuilding Group Panama City Florida.
WEDA EASTERN CHAPTER MEETING GLDD S ATB ELLIS ISLAND & TUG D.B. MACKIE Ellis Island length 433 ft. Breadth 92 ft Installed power 11,300 hp D. B. Mackie length 158 ft. Breadth 52 ft. Installed power 17,300hp
IHC Holland BV IHC WFSV Brief Specifications
IHC WFSV 18-80 Brief Specifications Contents 1 Vessel Particulars... 4 2 Rules & Regulations... 5 3 Power and propulsion... 6 4 Cranes... 7 5 Life on board... 8 6 Internal workflow... 9 7 Motion Compensated
FMB13437 Self Propelled Cutter Suction Dredger
FMB13437 Self Propelled Cutter Suction Dredger Manufactured by the IMS Dredge Company of Wisconsin USA this is the largest range of their road-transportable, cutter suction dredgers. The machines feature
Author s Name Name of the Paper Session. PDynamic. Positioning Committee. Marine Technology Society
Author s Name Name of the Paper Session PDynamic Positioning Committee Marine Technology Society DYNAMIC POSITIONING CONFERENCE September 17-18, 2002 Thrusters Service Experience with 4 x 4,500 kw Thrusters
In a NabCat from Moen Marin, you will appreciate the high level of comfort, practical solutions and high technical quality
In a NabCat from Moen Marin, you will appreciate the high level of comfort, practical solutions and high technical quality Description: This description, with relevant set-up drawings, is for a catamaran
MACON CHARTER S-type dipperdredger "PUSHING DAISIES with BA 900 excavator
S-type dipperdredger "PUSHING DAISIES with BA 900 excavator 1 Pushing Daisies, an S-type Donge Dipperbarge dredger with BA 900: - A large dipperbarge with high breakout capacity up to 24 m. - An unique
Backhoe Dredging Monitoring System
DipMate Essential Backhoe Dredging Monitoring System Cost-competitive monitoring system providing full insight during backhoe dredging underwater specialists dipmate essential seatools 1 Cost-competitive
OTC 2010 X-pert Center
OTC 2010 X-pert Center Jack-up and Marine Propulsion Gearbox/ Rig Solutions Rama Iyer Marine & Offshore division Mechanical Drives General information marine gearboxes Power ranges from 1200 HP to 60,000
NabWork 1065 x 500 from Moen Marin is a well-equipped locality boat with excellent manoeuvrability
NabWork 1065 x 500 from Moen Marin is a well-equipped locality boat with excellent manoeuvrability Description: This description, with relevant set-up drawings, is for a single-hull aquaculture boat set
MULTI-PURPOSE DREDGERS
MULTI-PURPOSE DREDGERS ACHIEVING THE LOWEST COST & ENVIRONMENTAL IMPACT PER M3 Dredge Yard +31 85 3035 866 www.dredgeyard.co MULTI-PURPOSE DREDGERS QUALITY FROM START TO FINISH Dredge Yard designs and
Energy Reductions in Fishing Vessels
European fisheries fund (EFF) Danish Fishermen's Association Energy Reductions in Fishing Vessels Ministry of Food, Agriculture and Fisheries Energy efficiency audit project Project start in June 2009,
SIEM MARLIN - MT 6017 MK II
SIEM MARLIN - MT 6017 MK II SIEM - MT 6017 SIEM MARLIN Marlin MT 6017 Mk MK II II General The vessel s main services/duties are: The vessel is a Multi-purpose field and ROV Support Vessel (MRSV) With its
BUILT: 2009 Dry Dock World Pertama FLAG: Panama CLASS: ABS + A1 + (E) + AMS + ACCU + ICE CO + DP3 + HE LIDECK + ES + FiFi 2
GOLIATH The Goliath is one of the largest offshore construction vessels in the world. This multi-functional vessel is equipped with DPIII and a 1600mt crane, primarily for offshore installation. The Goliath
Designed for customers
Designed for customers operational excellence Bourbon Evolution 800 Multi-Purpose Supply Vessels RELIABLE, EFFICIENT AND INNOVATIVE A series of 10 multipurpose supply vessels focused on providing the highest
Cutter Suction Dredger M28
Cutter Suction Dredger M28 Content General Arrangement Plan... 3 Cutter Suction Dredger M28... 4 General... 5 Shipbuilding... 6 Machinery, Hydraulic, Electric... 7 Machinery... 7 Hydraulicsystem... 9 Elektricsystem...
7.3 Maintenance of Dredging Fleet
7.3 Maintenance of Dredging Fleet There are several methods for maintaining the dredging fleet in a normal and economical condition to achieve the planned dredging schedule. Maintenance of dredging fleet
PACIFIC TUG (AUST) PTY LTD
PACIFIC TUG (AUST) PTY LTD CAPABILITY STATEMENT TOWAGE, BARGES AND MARINE SERVICES CAPABILITY STATEMENT COMPANY OVERVIEW Pacific Tug provides services in the following areas: Vessel support for: Gas &
SIEM SPEARFISH - OSCV 03
SIEM SPEARFISH - OSCV 03 WB WB F.O. F.O. WB WB WB / Drill Water SIEM SPEARFISH - OSCV 03 General The vessel is an Offshore Subsea Construction Vessel (OSCV) This brouchure describes an offshore support
CORPORATE PRESENTATION WELCOME TO DAMEN SONG CAM SHIPYARD
WELCOME TO DAMEN SONG CAM SHIPYARD MISSION STATEMENT "It is our dream to become the world s biggest workboat factory, producing top quality vessels in the most efficient way against the lowest cost price"
BOĞAÇAY RAmparts 2400 SX 60/70/75 BUILDING FOR THE FUTURE
BUILDING FOR THE FUTURE The RAmparts 2400 SX tug is twin Z-drive, diesel powered tug designed for maximum efficiency in the performance of ship-handling duties for sea going ships. The hull form and layout
EXECUTIVE SUMMARY Dredging Equipment DAMEN DOP PUMP
EXECUTIVE SUMMARY DAMEN DOP PUMP DAMEN DOP PUMP OVERVIEW DOP 1515 DOP 1815 DOP 2320 DOP 3025 DOP 3530LD DAMEN DOP PUMP CHARACTERISTICS 1515 1815 2320 3025 3530LD Mixture capacity max 500 m 3 /h 600 m 3
Latest Ships built in Japan
SUMITOMO HEAVY INDUSTRIES, LTD. Latest Ships built in Japan Ferry Tanker/Aframax Product carrier Bulk carrier/panamax PCC/PCTC Work vessel FERRY TOSHIMA BERGITTA MORNING EXPRESS WORLD RULE SIRIUS LEADER
VESSEL CHARACTERISTIC FIELDS
VESSEL CHARACTERISTIC FIELDS ENTIFICATION Key fields normally used to identify the vessel and its attributes e.g. IMO NUMBER, VESSEL, CURRENT FLAG, VESSEL TYPE etc. IMO VESSEL YEAR OF BUILD FLAG CALL SIGN
GEARBOXES CUSTOM PROPELLERS, SHAFTS AND RUDDERS TUNNEL THRUSTERS AZIMUTH THRUSTERS CONTROLLABLE PITCH PROPELLER SYSTEMS
CONTROLLABLE PITCH PROPELLER SYSTEMS AZIMUTH THRUSTERS TUNNEL THRUSTERS CUSTOM PROPELLERS, SHAFTS AND RUDDERS GEARBOXES Josiah Stone little knew how successful the company that bears his name would become
Design and construction of a spray pontoon and maintenance of HAM 310
Internship Report Design and construction of a spray pontoon and maintenance of HAM 310 Rick Dickhof, s1133500 Van Oord Dredging and Marine Contractors Ship Management Department Supervisors: Arend Feije
BOA DEEP C Subsea / IMR / Offshore Construction Vessel
Accommodations: 100 beds 250 t AHC + 30 t AHC auxiliary crane to 2,000 m (6,561.7 ft) 500/500/500 t AH/towing winches to 3,000 m (9,843 ft) 7.2 m x 7.2 m (23.6 ft x 23.6 ft) moon pool 2 x 220 HP WROV s
Driving dredgers, a strong tradition Dredge Technology. Complete Drive and Control Solutions
Driving dredgers, a strong tradition Dredge Technology Complete Drive and Control Solutions 2 Your Demand Is Our Challenge: You Define The Task We Supply The Solution Rexroth Systems & Engineering Your
Carbon footprint report 2017
Carbon footprint report 2017 For DEME activities in Belgium and the Netherlands; in accordance with the CO2 Performance ladder v3.0 in Ton CO2 Rev. 2018-02-26 Uncontrolled if printed. Most recent version
MILITARY AND PROFESSIONAL BOATS PALFINGER MARINE FOR SPECIAL MISSIONS
MILITARY AND PROFESSIONAL BOATS PALFINGER MARINE FOR SPECIAL MISSIONS Photo: Tom Weber PALFINGER MARINE WORLDWIDE 100 % GLOBAL COVERAGE 24/7 AVAILABILITY SERVICE HOTLINE +43 662 4684 82128 THE GAME CHANGER
DAMEN DREDGING EQUIPMENT
DAMEN DREDGING EQUIPMENT DOP SUBMERSIBLE DREDGE PUMPS T H E D O P S U B M E R S I B L E D R E D G E P U M P, A M U LT I F U N C T I O N A L D R E D G I N G T O O L Damen offers a complete range of heavy-duty
EK60 MULTI-PURPOSE PILING RIG
MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG The GEAX EK60 is a multi-purpose piling rig designed to achieve the highest levels of versatility, manoeuvrability, ease of use, transportation, production
ALP introduces its next generation long distance ocean towing anchor handling fleet
ALP introduces its next generation long distance ocean towing anchor handling fleet 2015 ocean towage anchor handling offshore supply positioning and mooring salvage alpspecs The ALP Fleet of long distance
SSC Case Study V Container Ship Recurring Failure of Side Longitudinal Passing through a Web Frame
SSC Case Study V Container Ship Recurring Failure of Side Longitudinal Passing through a Web Frame Contents: Vessel Particulars Summary of Structural Failure Background Detailed Description of Structural
Reliable, Silent, Efficient. Voith Linear Jet
Reliable, Silent, Efficient. Voith Linear Jet 1 A New Propulsion Standard. The Voith Linear Jet (VLJ) combines the best elements of two existing technologies conventional screw propellers and water jets.
CONVER DREDGERS C86xs Siltpusher
CONVER DREDGERS C86xs Siltpusher The C86xs siltpusher is developed for dredging of smaller water courses. Siltpushers are suitable for pushing organic silt, not so much for pushing sand or other types
DREDGER UNEARTH COVERAGE AUSTRALIA S MOST ADVANCED FOR FAST AND EFFICIENT OF YOUR NEXT DREDGING PROJECT CALL
The world stops for business at the Port of Brisbane Port Office, Sandpiper Avenue, Fisherman Islands, Queensland, Australia. Mailing Address: Locked Bag 1818, Wynnum, Qld 4178, Australia. UNEARTH AUSTRALIA
Swinging Ladder Dredges
Swinging Ladder Dredges 360 SL Swinging Dragon Dredge 8 pumping system and 15 digging depth Economical and highly transportable Optional swing winches for conventional operation 460 SL Swinging Dragon
SNAME Luncheon 14 Sept Wind Turbine Installation Vessels
SNAME Luncheon 14 Sept 2010 Wind Turbine Installation Vessels Introductions SBM Offshore and GustoMSC Wind Turbine Vocabulary / Components Offshore Vessels Typical Installation Methods Market Evolution
Engtek Manoeuvra Systems Pte Ltd
Engtek Manoeuvra Systems Pte Ltd Marine Propulsion Technology PumpJet Thruster Systems The enclosed data, information, description, photos and illustrations in this brochure are the property of Engtek
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines PVE Piling and Drilling Rigs PVE Piling and Drilling
Submersible motors MAS series
Submersible motors MAS series ABOUT US DAC Electric is a fairly young but highly experienced combination of professionals from all over the world. The founders, from the Netherlands and the Czech Republic,
Dredging Equipment. Design and Manufacture. Dredging Equipment. Design and Manufacture
Design and Manufacture Design and Manufacture 1 Design and Manufacture Design and Manufacture Neumann Equipment are known worldwide in the sand and mineral extraction industries for manufacturing well-engineered,
MAKING MARINE APPLICATIONS GREENER
MAKING MARINE APPLICATIONS GREENER Bengt Ramne Presents Making marine applications greener GreenPilot Bengt Ramne Co-financed by METHANOL AS MARINE FUEL VISION: COMPETITIVE SHIPPING WITH MINIMUM ENVIRONMENTAL
EK40 MULTI-PURPOSE PILING RIG
MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG The GEAX EK40 is a multi-purpose piling rig designed to achieve the highest levels of versatility, manoeuvrability, ease of use, transportation, production
LOW EMISSION HIGH SPEED FERRY THE GREEN MACHINE
LOW EMISSION HIGH SPEED FERRY THE GREEN MACHINE Designed for San Francisco Bay Area Water Transit Authority (WTA) By Seaworthy Systems, Inc. Jan 7, 2003 Presentation by William A. Wood BACKGROUND! The
SPA 2205 FRP STAN PATROL 2205 FRP EXECUTIVE SUMMARY
SPA 2205 FRP STAN PATROL 2205 FRP EXECUTIVE SUMMARY CAPABILITIES A RELIABLE AND VERSATILE PLATFORM The compact class of the Damen Stan Patrol are state-of-the-art, modern, yet reliable vessels. With the
G R O UP. Port of Liverpool. Towage Information for the. Port of Liverpool
G R O UP Port of Liverpool Towage Information for the Port of Liverpool Peel Ports Group June 2013 Contents Tug Types... 2 Conventional Screw Tug... 2 Azimuthing Stern Drive (ASD) (Z-peller)... 2 Voith-Schneider
Cutterhead Dredge 55ft Ladder 20 X 18 X 46 In Hull Mount Pump Noble Spirit 2
Cutterhead Dredge 55ft Ladder 20 X 18 X 46 In Hull Mount Pump Noble Spirit 2 March 1, 2011 Conditions: Minimum Depth: Maximum Depth: 6ft 44ft Estimated General Information: Length: 115ft Width: 27-6 Estimated
NVC-Design TM. NVC m Purse Seiner/Pelagic Trawler. Fact sheet DESIGN & INTEGRATED SHIP SYSTEM GENERAL INFORMATION.
MV Gunnar Langva Newbuilding no. 24 at West Contractors AS Deliv ered nov ember 2003 GENERAL INFORMATION Main dimen sions: Length over all Length between p.p. Breadth mld. Depth ml d to M.deck Depth ml
HEAD OFFICE. Via Trieste Ravenna IT tel fax
seminole 2016 OK_Layout 1 13/04/16 18:52 Pagina 1 HEAD OFFICE Via Trieste 279 48122 Ravenna IT tel +39 0544422252 fax +39 0544423767 info@micoperi.com www.micoperi.com All details are believed to be correct
GUIDELINES FOR TOWAGE AT SEA
GUIDANCE NOTES GD 02-2012 CHINA CLASSIFICATION SOCIETY GUIDELINES FOR TOWAGE AT SEA Effective from January 01 2012 Beijing CONTENTS CHAPTER 1 GENERAL PROVISIONS...1 Section 1 Purpose and Requirements...1
Pacific Ports Conference on Clean Air Policies and Strategies
Pacific Ports Conference on Clean Air Policies and Strategies 2006. 12. 13 Overview of Busan Port 2 nd Largest City in Korea World s 5 th Largest Container Port Global Production Base City of Tourism &
VectRA AVT 3000 BUILDING FOR THE FUTURE
BUILDING FOR THE FUTURE This specification describes a high-performance Voith Schneider Propeller (VSP) tug in tractor configuration, designed for maximum efficiency in the performance of both harbour
CLV SIA. Vessel Specification. M-Tech Offshore Torskekaj Esbjerg, Denmark
Vessel Specification DP-2 CABLE LAYING VESSEL CONFIGURED FOR SUBSEA POWER CABLE INSTALLATIONS AND INTER-ARRAY LINKS The CLV SIA is acquired by M-Tech Offshore A/S, a Danish Company equally owned by NT
NORDIC QUEEN. Vessel Specification
NORDIC QUEEN Vessel Specification Length 75.55 m Call Sign: 3EXE8 Breadth 19.20 m IMO: 9444778 Draught 6.50 m Class: Lloyds Register Depth to 1 st Deck 7.60 m 100A1 OSV ECO(TOC) Deck Space 680m 2 @ 10mt/m
Design: Aker OSCV 06L DSV Built: 2009 IMO No: Call sign: C6XW3 SKANDI ARCTIC DSV
Design: Aker OSCV 06L DSV Built: 009 IMO No: 94138 Call sign: C6XW3 SKANDI ARCTIC DSV IMO No 94138 The vessel is designed as a vessel for world wide operations Low resistance hull lines designed for speed
Diving Support Vessels
Sales / charter brochure Romas Marine, Diving Support Vessels *This is a small selection of what we have in our database. For more vessels please contact one of our staff members. Reference : DSV 571311
T-Sense. Optical Torque Measuring systems. Product Bulletin TO BE REALLY SURE
TSense Optical Torque Measuring systems 660 Product Bulletin WWW.VAF.NL TO BE REALLY SURE 1 Introduction Principle of operation The use of a TSense torque measuring system means efficiency improvement,
T24 T m3 Chemical and Oil Product Tanker
T24 T24 21 500 m3 Chemical and Oil Product Tanker 1 Brief description T24 21 500 m 3 Chemical and Oil Product Tanker GENERAL The FKAB T24-series are 21 000 m 3 tankers for Chemicals (IMO II) and Oil Products,
BPQ5 USA Offshore Tug Date updated date 2 Tug Name text 3 Identification. 5 Build 1 Date delivered (built) 2 Builder (where rebuilt)
Chapter General Information Section General Information Date upd Tug Name 3 Identification IMO VIN 4 Vessel's previous name(s) Grid column Grid column Grid row Grid row Grid row 3 Grid row 4 5 Build Name
Noah s Ark, UZMAR s Tug
Noah s Ark, UZMAR s Tug Noah s Ark, UZMAR s Tug The Origins of the UZMAR In 1984 the first privately owned pilotage and towage company, UZMAR Shipping Ltd., was founded in Turkey by senior Harbour Pilot
Outline Specification 60M -1500m 3 Live Fish Carrier
1 LOA - 60,5m LPP - 55,5m B -14m D MAIN DECK -6,Om D BOAT DECK -8,8m T MAX - ~5,3m Frame spacing - 0,6m Cargo tanks - 2x~825m3 (Net volume for fish -1500m3) Hull and superstructure of the vessel to be
AZIMUTH STERN DRIVE TUG 2813 EXECUTIVE SUMMARY
AZIMUTH STERN DRIVE TUG 2813 EXECUTIVE SUMMARY ASD TUG 2813 DAMEN SOLUTIONS SAFETY RELIABILITY EFFICIENCY ASD TUG 2813 COMPACT MULTI PURPOSE VESSEL OPERATIONAL AREA: OFFSHORE, COASTAL WATERS, HARBOURS,
Offshore cranes for sale November 2017
1) 20 tons AHC McGregor Knuckle Boom Crane Resale Built : in 2016 PROMPT AVAILABLE Type : HMC 2201 LKO 100 20 (200 10), 2300 m AHC SWL : 20 tons @ 10 mtr / 10 tons @ 20 mtr Wire length : 2300 mtr; wire
Alaska Base Inventory
Alaska Base Inventory System No. System Name E00003 ESSM FACILITY, ALASKA BASE P01100 BEACH TRANSFER SYSTEM P02100 BOARDING KIT P03100 BOOM HANDLING BOAT P03110 BOOM HANDLING BOAT, 30' P03200 BOOM TENDING