p a r a l l a x price list

Transcription

1 p a r a l l a x price list october 2018

2 terms and conditions Sales and Service Policy Guidelines detailing the operating policies and procedures of Bernhardt Design are provided in the Sales and Service Policy available online at Prices and Specifications Prices and specifications are subject to change without notice. All prices quoted will be FOBour factories. If applicable, sales tax will be based on ship-to destination. Bernhardt Design reserves the right to make changes in dimensions, construction, price lists, or product literature without prior notice. Order Entry All orders are subject to final acceptance by Bernhardt Design in Lenoir, NC. Receipt of our acknowledgment indicates acceptance of your order subject to the terms set forth on the acknowledgment. Bernhardt Design attempts to clarify all purchase orders. However, in the event the price list number and description on the purchase order differ, the price list number will prevail. Changes / Cancellation All orders in production are considered firm orders and are not subject to changes or cancellation. Custom Design Bernhardt Design may alter products to meet specific needs. Contact your local sales representative when a custom design is needed. Custom designs require minimum quantities, additional lead time, and upcharges. A custom job number, available from your local sales representative, must be submitted with purchase orders. Orders combining custom design with standard product cannot be scheduled for production until custom items are approved. Custom design orders are not subject to revision or cancellation after acknowledgment. Shipping Bernhardt Design will ship in accordance with customer instructions whenever possible. If not specified, Bernhardt Design will exercise its best judgement in selecting a carrier. Orders in production will be shipped as scheduled and cannot be held. High quality cartoning meeting trucking and railroad specifications is standard at no extra charge. Some items may be blanket wrapped for shipment. Freight Damage and Claims Bernhardt Design is not liable for damages that occur during transit or storage. The carrier assumes all responsibility upon acceptance of product. It is the customer s responsibility to inspect all products upon receipt and file any claims with the carrier. No product should be refused. If products are received damaged, a written exception should be made on the bill of lading and an immediate inspection be requested of the carrier. Concealed damage must be reported to the carrier within 10 business days from date of delivery. Failure to make claims shall constitute acceptance of the products and waiver any claims of defects, errors or shortages. In the event delivery is made on a Bernhardt Design truck, the products should be carefully inspected for transit damage. If contents are damaged, the driver should be notified to call his dispatcher for immediate disposition. Concealed damage must be reported within 10 business days from date of delivery and product/packaging held for inspection by a Bernhardt Design representative. Replacements for product damaged in shipment or storage will be manufactured upon receipt of a purchase order. Returns No merchandise may be returned to Bernhardt Design without written consent in the form of a Return Authorization from our Quality Assurance Department stating why the item is being returned and how the item will be shipped. Unauthorized returns will be automatically refused by our receiving department as well as returns not in accordance with Bernhardt Design shipping instructions. Liability for defective merchandise shall be limited to the replacement or repair of that merchandise, and Bernhardt Design shall not be liable for other damages or losses. Measurements and Weights All measurements and weights are approximate and subject to change without notice. Care and Cleaning Finished wood surfaces should be cleaned with a soft damp cloth, wiping in the direction of the grain. Furniture should be buffed dry immediately with a soft cloth. Wood Finishes Bernhardt Design tables are available in finishes that are compatible with casegoods and seating finishes. However, finishes on tables may vary slightly from those on casegoods and seating due to the natural characteristics of the wood. No absolute match is implied or guaranteed. Light Finishes Bernhardt Design offers lighter finishes 836, 837, 840, 850, and 870 on certain veneers. Light finishes do not hide or mask the natural characteristics of the wood. Therefore, inherent natural characteristics of the wood will vary from piece to piece when using a light finish. Natural characteristics include the natural discolorations of the wood substance and color variations in glued up stock. These natural characteristics are not considered defects by Bernhardt Design, and therefore merchandise will not be replaced. 10/18 2

3 terms and conditions Special Finishes Special finishes, made to customer specifications and subject to factory approval, may be available at a 5% net upcharge with a $500 net minimum. Additional leadtime may be required for special finish items. Special finish orders will not be acknowledged until the special finish sample is approved in writing and received by Bernhardt Design Customer Service. Special finish orders are not subject to revision or cancellation after acknowledgment. Warranty Bernhardt Design will repair or replace, at its discretion, any table product or part thereof which fails as the result of defects in material and workmanship, under single shift use and normal care for five years. This warranty shall apply only to the original purchaser. This warranty does not cover normal wear and tear, misuse or abuse of product, dramatic temperature changes, exposure to unusual conditions or damages incurred by contact with seating products, casegoods or other surfaces. Some of the product designs shown are patented in the United States and will remain the property of Bernhardt Design. Any reproduction of the products constitutes an infringement of patented copyright laws and will be subject to prosecution. Bernhardt Design reserves the right to make changes in dimensions, design and/or construction, price lists, or product literature without prior notice. General Services Administration Products available on the Bernhardt Design GSA - Federal Supply Service Contract GS-27F-010GA are noted in the overview section of the product descriptions. For information regarding GSA pricing, please contact your local Bernhardt Design sales representative or call Send all GSA payments to: Collections Center Drive Chicago IL Natural color changes, variations or movements in lumber or veneer products, exposure to extreme temperature changes and direct sunlight may cause color changes and/or surface damage. These are circumstances beyond the control of Bernhardt Design and are not warranty issues. Repair or replacement of discontinued product will be at the discretion of Bernhardt Design. This warranty is the customer s exclusive remedy for product defect and does not apply to damage caused by a freight carrier, dealer, installer, user modification, attachments to a product, or any third party. Bernhardt Design has the exclusive right to make the final determination of product misuse or abuse. Except as stated above, Bernhardt Design makes no express or implied warranties as to any product, and in particular, makes no warranty of merchantability or of fitness for any particular purpose. Bernhardt Design shall not be liable for any consequential or incidental damages or for commercial loss arising from any product defect. Operational Parts Warranty Drawer glides, drawer boxes, drawer pulls, and lock mechanisms have a Life-Time Warranty for original purchaser. Power and communication components are warranted for one year. Design and Patent Rights All of the products shown in Bernhardt Design catalogs and described in Bernhardt Design price lists are, and remain, the property of Bernhardt Design, with the sole right reserved to manufacture and to distribute. Bernhardt Design is a registered trademark of Bernhardt Furniture Company of Lenoir, NC. 3

4 guaranteed freight Preferred Carrier Guaranteed Freight Rates Freight charges will be applied to orders as a separate line item based on the zones listed. Rates are based on zones with a minimum for each zone. All zones are located within the Continental United States. The freight amount is calculated on the total merchandise net COM price, excluding any extra discounts beyond standard net pricing. Additional freight fuel surcharges may apply. Rates are based on deliveries made Monday through Friday, 8 am until 5 pm. All orders are shipped by Bernhardt Design company trucks or preferred carriers specified by Bernhardt Design. If a purchase order does not specify that the product must ship complete, Bernhardt Design reserves the right to select the most effective shipping method necessary, including split shipments. Dealer warehouse information, including phone number and contact name, must be specified on the purchase order. Direct site deliveries may be requested with an additional freight cost. Requests for direct site deliveries must be made 2 weeks prior to the scheduled ship week and meet the following criteria: Minimum of half truckload Delivery site accessible by a 53 trailer Complete delivery site address with contact name and on-site phone number Labor available for unloading Minimum Freight Average Zone Charge Rate Service Days 1 $80 5% 2-4 Business Days 2 $80 6% 2-4 Business Days 3 $90 7% 3-5 Business Days 4 $90 8% 5-7 Business Days 5 $90 9% 6-9 Business Days 6 $110 10% 6-9 Business Days 7 $110 11% 7-10 Business Days 8 $120 12% 8-12 Business Days 9 $120 13% 8-12 Business Days 10 $120 15% Business Days Note: Average Service Days excludes ship day. Deliveries that do not meet the criteria must be directed to a receiver warehouse. If a receiver warehouse is not available, the dealer may make arrangements with their own 3rd party carrier. If a 3rd party carrier is elected, a contact name, phone number and address is required. Weekend direct site deliveries will incur a $500 per trailer weekend delivery fee. Weekend is defined as between 5 pm Friday and 8 am Monday

5 finishes Laminate Selections A three character sku identifies each laminate selection as well as the standard finish offered. Individual components are priced with standard finish on standard laminate. A variety of Wilsonart standard laminates with standard finishes is offered on conference and multipurpose tables. Additional colors may be available but are subject to upcharges and extended lead times. The laminate option is available on components where noted as an option in the material specification code. All laminate tops will have a 3mm matching edge band. PLL Solid Laminate Standard Solid 671 Designer White, Wilsonart D Matte Finish 672 Frosty White, Wilsonart Matte Finish 673 Fashion Grey, Wilsonart D Matte Finish 674 North Sea, Wilsonart D90-60 Matte Finish 675 Black, Wilsonart Matte Finish Veneer Selections A three character sku identifies each species as well as the standard finish offered. Individual components are priced with standard finish. Special finishes on veneers made to customer specifications are subject to factory approval and a 5% net upcharge with a $500 net minimum. Transparent stains and sealers are applied in multiple steps to enhance the beauty of the natural wood. A durable, baked-on, top-coat of conversion varnish or UV topcoat is applied to protect the product. It is recommended that felt, cork or fabric backed desk pads and accessories are used on worksurfaces to minimize wear. When specifying light finishes such as 836, 837, 840, 850 or 870, the color and characteristic variances of both veneer and solid wood are apparent. Therefore, exact color matches are not possible. CHY Cherry Flat Cut MPL Maple Flat Cut OAK Oak Rift Cut WGL Woodgrain Laminate Standard Woodgrain 678 New Age Oak, Wilsonart Causal Rustic Finish 679 Brazilwood, Wilsonart Matte Finish 680 Walnut Heights, Wilsonart 7965K-12 Soft Grain Finish 681 Studio Teak, Wilsonart Causal Rustic Finish 682 Asian Night, Wilsonart Causal Rustic Finish 683 Portico Teak (Grey), Wilsonart 8210K-28 Gloss Line Finish Standard Finish Standard Finish Standard Finish Glass Selections WLT Walnut Flat Cut PLD Paldao Quarter Cut GPW Back-Painted White Glass GEW Etched, Back-Painted White Glass Solid Surface Selections SSF Solid Surface Standard Finish CGW Corian, Glacier White Standard Finish Standard Finish

6 base Parallax Base Y2Y Base Y2Z Base Y2X Base 16'' 11'' The Parallax conference table features a polished aluminum leg assembly available in three configurations. All legs are equipped with adjustable levelers with a 1 '' range. Bases and tops are specified and sold separately. See the specific top size desired for the appropriate number of bases required. The Parallax base is designed to work with the Mediatrac rail system. When installed, bases mount between the rails and provide clear access for the Mediatrac grommet system if specified. The Parallax base does not have wire management capabilities. A VGS or VGW cable management snake must be specified to conceal wiring or cables extending to the floor. 25Ω'' Y2X bases are always mounted on the ends. 28 '' Parallax is BIFMA Level 2, GREENGUARD and FSC C certified. Visit the product page at Bernhardtdesign.com for BIFMA Level 2 and GREENGUARD certifications. FSC C Chain of Custody certification is available by submitting a request in writing before or during the quoting process to be printed on acknowledgments and invoices. For complete information regarding the Level 2, GREENGUARD and FSC certifications, please contact bgreen@bernhardt.com. Approved for GSA Contract GS-27F-010GA. Y2Z base '' wide Y2Y base '' wide Y2X base '' wide description sku w d h weight specifications price base Y2X end assembly for all tables $ 846 angled base end assembly for all tables polished aluminum finish base straight base Y2Z table width 54'' or less 846 center assembly for table widths 54'' or less polished aluminum finish straight base Y2Y table width exceeds 54'' 846 center assembly for tables width greater than 54'' polished aluminum finish specification codes example: PXS-SKU series sku circuit P X S - 6

7 tops Parallax Tops Tops are available with optional Mediatrac grommets. 17 '' Top ships with Mediatrac rail system pre-installed Parallax bases will mount into the Mediatrac rails. Parallax tops are specifically constructed to accommodate Parallax bases. Tops and bases are specified and sold separately. See the specific top size desired for the appropriate number of bases required. Detail view of the Parallax top with the base and the Mediatrac grommet. Laminate Veneer Glass - Mediatrac TM 1 Only Solid Surface PLL Solid Laminate WGL Woodgrain Laminate CHY Cherry WLT Walnut MPL Maple OAK Oak PLD Paldao GPW Back-Painted White Glass GEW Etched, Back-Painted White Glass SSF Corian, Glacier White 1 '' Flat 1π'' Block 1 '' Flat PL '' Polished Flat 1 '' Flat 1 '' Reverse Bevel 1 '' Bevel SH 1 '' Shaped 1 '' Reverse Bevel 1 '' Reverse Bevel specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 7

8 tops PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF square top ACC angled bases $ 1394 $ 1813 $ 2102 $2460 $ 2439 $ 2796 $ 4693 $ 5726 $ 3309 $ 3872 ADD angled bases AEE angled bases arched square top BCC angled bases BDD angled bases BEE angled bases radius square top CCC angled bases CDD angled bases CEE angled bases round top DCC angled bases DDD angled bases DEE angled bases specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 8

9 tops rectangular PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF EEB angled bases $ 1373 $ 1785 $ 2220 $ 2598 $ 2576 $ 2953 $ 5504 $ 6715 $ 4734 $ 5539 EEC angled bases EFB angled bases EFC angled bases EGB angled bases EGC angled bases EHB angled bases EHC angled bases EIB angled bases EIC angled bases EJB angled bases EJC angled bases EJD angled bases EKB angled bases EKC angled bases EKD angled bases ELB angled bases ELC angled bases ELD angled bases EMB angled bases EMC angled bases EMD angled bases specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 9

10 tops rectangular PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF ENB angled bases $ 3042 $ 3955 $ 3831 $ 4483 $ 4444 $ 5096 $ 9188 $ $ 7206 $ 8432 ENC angled bases END angled bases EOB angled bases EOC angled bases EOD angled bases EOE angled bases EQC (2) angled, (1) 32 straight base EQD (2) angled, (1) 32 straight base EQE (2) angled, (1) 39 straight base ESC (2) angled, (1) 32 straight base ESD (2) angled, (1) 32 straight base ESE (2) angled, (1) 39 straight base EUD (2) angled, (1) 32 straight base EUE (2) angled, (1) 32 straight base EWD (2) angled, (1) 32 straight base EWE (2) angled, (1) 39 straight base specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 10

11 tops rectangular PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF EYD (2) angled, (1) 32'' straight base $ 5691 $ 7399 $ 6090 $ 7126 $ 7065 $ 8100 $ $ $ $ EYE (2) angled, (1) 39 straight base E1D (2) angled, (1) 32'' straight base E1E (2) angled, (1) 39 straight base E3D (2) angled, (1) 32'' straight base E3E (2) angled, (1) 39 straight base E5D (2) angled, (1) 32'' straight base E5E (2) angled, (1) 39 straight base E7D (2) angled, (1) 32'' straight base E7E (2) angled, (2) 39 straight base E9D (2) angled, (1) 32'' straight base E9E (2) angled, (2) 39 straight base specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 11

12 tops radius rectangular PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF FEB angled bases $ 2012 $ 2616 $ 2664 $ 3117 $ 3091 $ 3544 $ 6159 $ 7514 $ 5388 $ 6304 FEC angled bases FFA angled bases FFB angled bases FFC angled bases FGB angled bases FGC angled bases FHB angled bases FHC angled bases FIB angled bases FIC angled bases FJB angled bases FJC angled bases FJD angled bases FKB angled bases FKC angled bases FKD angled bases B angled bases C angled bases D angled bases FMB angled bases FMC angled bases FMD angled bases specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 12

13 tops radius rectangular PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF FNB angled bases $ 3498 $ 4548 $ 4493 $ 5257 $ 5212 $ 5976 $ 9691 $ $ 8318 $ 9733 FNC angled bases FND angled bases FNE angled bases FOB angled bases FOC angled bases FOD angled bases FOE angled bases FQC (2) angled, (1) 32'' straight base FQD (2) angled, (1) 32'' straight base FQE (2) angled, (1) 39 '' straight base FSD (2) angled, (1) 32'' straight base FSE (2) angled, (1) 32'' straight base FSF (2) angled, (1) 39 '' straight base FUD (2) angled, (1) 32'' straight base FUE (2) angled, (1) 39 '' straight base FWD (2) angled, (1) 32'' straight base FWE (2) angled, (1) 39 '' straight base specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 13

14 tops radius rectangular PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF FYD (2) angled, (1) 32'' straight base $ 6592 $ 8570 $ 7106 $ 8315 $ 8243 $ 9451 $ $ $ $ FYE (2) angled, (1) 39 '' straight base F1D (2) angled, (1) 32'' straight base F1E (2) angled, (1) 39 '' straight base F3D (2) angled, (1) 32'' straight base F3E (2) angled, (1) 39 '' straight base F5D (2) angled, (1) 32'' straight base F5E (2) angled, (1) 39 '' straight base ` F7D (2) angled, (1) 32'' straight base F7E (2) angled, (2) 39 '' straight base F9D (2) angled, (1) 32'' straight base F9E (2) angled, (2) 39 '' straight base specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 14

15 tops arched PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF GEB 60 42/36 2 angled bases $ 2062 $ 2681 $ 3355 $3926 $ 3892 $ 4463 $ 6401 $ 7810 $ 5176 $ 6046 GEC 60 48/42 2 angled bases GFB 66 42/36 2 angled bases GFC 66 48/42 2 angled bases GGB 72 42/36 2 angled bases GGC 72 48/42 (2) 29'' bases GHB 78 42/36 2 angled bases GHC 78 48/42 2 angled bases GIB 84 42/36 2 angled bases GIC 84 48/42 2 angled bases GJB 90 42/36 2 angled bases GJC 90 48/42 2 angled bases GJD 90 54/48 2 angled bases GKB 96 42/36 2 angled bases GKC 96 48/42 2 angled bases GKD 96 54/48 2 angled bases GLB /36 2 angled bases GLC /42 2 angled bases GLD /48 2 angled bases GMB /36 2 angled bases GMC /42 2 angled bases GMD /48 2 angled bases specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 15

16 tops arched PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF GNB /36 2 angled bases $ 3598 $ 4678 $ 4527 $ 5297 $ 5252 $ 6021 $ 9691 $ $ 8318 $ 9733 GNC /42 2 angled bases GND /48 2 angled bases GOB /36 2 angled bases GOC /42 2 angled bases GOD /48 2 angled bases GOE /54 2 angled bases GQC /36 (2) angled, (1) 32'' straight base GQD /42 (2) angled, (1) 32'' straight base GQE /48 (2) angled, (1) 39 '' straight base GQF /54 (2) angled, (1) 39 '' straight base GSC /36 (2) angled, (1) 32'' straight base GSD /42 (2) angled, (1) 32'' straight base GSE /48 (2) angled, (1) 39 '' straight base GSF /54 (2) angled, (1) 39 '' straight base GUD /42 (2) angled, (1) 32'' straight base GUE /48 (2) angled, (1) 39 '' straight base GUF /54 (2) angled, (1) 39 '' straight base GWD /42 (2) angled, (1) 32'' straight base GWE /48 (2) angled, (1) 39 '' straight base GWF /54 (2) angled, (1) 39 '' straight base GYD /42 (2) angled, (1) 32'' straight base GYE /48 (2) angled, (1) 39 '' straight base GYF /54 (2) angled, (1) 39 '' straight base G1D /42 (2) angled, (1) 32'' straight base G1E /48 (2) angled, (1) 39 '' straight base G1F /54 (2) angled, (1) 39 '' straight base specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 16

17 tops arched PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF G3D /42 (2) angled, (1) 32'' straight base $ 7469 $ 9710 $ 7646 $ 8946 $ 8870 $ $ $ $ $ G3E /48 (2) angled, (1) 39 '' straight base G3F /54 (2) angled, (1) 39 '' straight base G5D /42 (2) angled, (1) 32'' straight base G5E /48 (2) angled, (1) 39 '' straight base G5F /54 (2) angled, (1) 39 '' straight base G7D /42 (2) angled, (2) 32'' straight base G7E /48 (2) angled, (2) 39 '' straight base G7F /54 (2) angled, (2) 39 '' straight base G9D /42 (2) angled, (2) 32'' straight base G9E /48 (2) angled, (2) 39 '' straight base G9F /54 (2) angled, (2) 39 '' straight base specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 17

18 tops oval PLL solid laminate WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut mediatrac1 TM only GPW GEW etched tops sold separately order bases separately sku l w specifications SH SH PF HKB (2) angled bases $ 2821 $ 3668 $ 4678 $ 5474 $ 5427 $ HKC (2) angled bases HKD (2) angled bases HMB (2) angled bases HMC (2) angled bases HMD (2) angled bases HNB (2) angled bases HNC (2) angled bases HND (2) angled bases HOB (2) angled bases HOC (2) angled bases HOD (2) angled bases HOE (2) angled bases HSD (2) angled, (1) 32'' straight base HSE (2) angled, (1) 39 '' straight base specification codes example: QTS-SKU-PXL07 material + finish code example: WLT 839 series sku edge base grommet location material finish top 1π'' block PX 000 none PLL solid laminate see page 5 1 '' bevel see pages for location codes WGL woodgrain laminate 1 '' flat CHY cherry PF '' polished flat MPL maple 1 '' reverse bevel OAK oak SH 1 '' shaped WLT walnut GPW glass white GEW glass etched white Q T S - - P X 18

19 mediatrac1 TM concept and assembly Mediatrac1 TM Parallax Concept and Assembly Overview Parallax utilizes the Mediatrac1 TM grommet system for power and data required at the worksurface. Order the desired top. Specify grommet placement when ordering top. Mediatrac TM rail system is pre-installed and included in the price. Order the base design. The base will straddle the rails. Order grommets and jumpers separately. Mediatrac TM grommet system Top assembly Includes the top and the Mediatrac TM rail assembly Base 19

20 mediatrac1 TM power + data Mediatrac1 TM Power and Data Overview Mediatrac1 is a simplified system for routing power and data to the conference table worksurface while managing wires and auxiliary equipment. Illustration showing Mediatrac TM grommets The Mediatrac rail system is standard on most Bernhardt Design conference table tops. This rail system provides the location for mounting bases and installing auxiliary components for wire and equipment management. The rails also provide critical structural integrity to the conference table top allowing for longer spans with greater strength and dimensional stability. Mediatrac1 grommet system provides power and (16) different options of Extron data configurations. Grommets are available in (5) different sizes ranging from an 8 x 4 single door unit to a 72 x 8 (6) door unit. All units have brushed aluminum trim with options for aluminum, laminate, veneer, glass or corian lids in corded, hardwired or 4-Trac system power infeed. 72'' x 8'' 48'' x 8'' 24'' x 8'' 8'' x 8'' 8'' x 4'' Mediatrac1 TM range of available sizes. Power/data locations in Mediatrac1 TM grommets Single Door Mediatrac1 Power Grommet Modules are located to accommodate users at the ends of conference worksurfaces. The single door modules have (2) grounded receptacles powered by the 4-Trac system and the capability to accommodate (2) Extron AAP Single Plates specified separately. Double Door Mediatrac1 Power Grommet Modules are ganged together to create the specified assembly for the table. The double door modules have (4) grounded receptacles powered by the 4-Trac system and the capability to accommodate (4) Extron AAP Single Plates - specified separately. 20

21 mediatrac1 TM power + data Mediatrac1 TM Laminate, Veneer and Glass Top Applications 23 '' 17 '' 8 '' 2 '' 4 '' Assembly showing the Mediatrac TM equipment tray used to accommodate various types of equipment to support data needs of the table. 23 '' 17 '' 4 '' 2 '' 2 '' 2 '' Boundary microphone location inside of rail Power cord from Mediatrac TM grommet Location of possible component hub for microphones Assembly showing the Mediatrac TM equipment tray when used with boundary microphones. This tray can be used to mount microphone hubs and controllers for various electronic components. Mediatrac TM cable sling Assembly showing the Mediatrac TM cable sling used in conjunction with the Extron pass-through AAP module. In this configuration the customers cables are used. 21

22 mediatrac1 TM power + data Mediatrac1 TM Grommet and Rail System Mediatrac TM grommets are available in 5 different sizes with either brushed aluminum, laminate, glass or wood veneer doors Mediatrac TM grommets mount between the Mediatrac TM rails Illustration showing two different sizes of the Mediatrac TM grommet system Wire management clip - 4 are included with Mediatrac TM rails Outlet strip Cable sling for use with Extron cable pass-through modules Mediatrac TM single unit grommet Equipment tray Mediatrac TM rails - standard on all tops Polished aluminum Mediatrac TM rail end cap - included on all tops with Mediatrac TM rails Illustration showing the available accessories for the Mediatrac TM rail and grommet system 22

23 mediatrac1 TM power + data Mediatrac1 TM Grommet and Rail System Illustration showing Parallax base configured and wired for power and data Mediatrac TM rail system is standard on all tops Wire Snake Clear access area for wires and Mediatrac TM grommets Polished aluminum legs and glides Illustration showing the use of the wire management snake 23

24 mediatrac1 TM grommet placement Mediatrac1 TM Laminate, Veneer and Solid Surface Grommet Placements M12 code designates the machining pattern for (2) 24'' Mediatrac1 TM grommets, sold separately. P12 code designates the machining pattern for (2) 24'' Mediatrac1 TM grommets and (3) 1'' Polycom grommets, all sold separately. Illustration shows the P15 configuration with Mediatrac1, speakerphone and speakerphone grommets Mediatrac1 TM grommets are available with either laminate, brushed aluminum, veneer, solid surface or two options of glass doors. When veneer doors are specified, the grain of grommet doors will run with the grain direction of the table top. See the Glass Grommet section for available configurations for glass grommets. Mediatrac1 TM grommets are available in two different configurations coded starting with the letter: M represents the Mediatrac grommet options P represents the combination of Mediatrac1 TM grommets and 1 round grommets located for the use of Polycom or similar speakerphone systems. This allows all wiring to be concealed and managed. 60'' - 78'' Table 6 Seats MO2-PO2 84'' - 90'' Table 6 Seats " MO3 CENTER MO4-PO4 MO5-PO5 24" 13-16" 5-8" 48" 24" MO6 MO7 MO8 MO9 Available on 90'' Tops 96'' - 108'' Table 8 Seats 38-50" 11-17" 24" MO4-PO4 MO5-PO5 MO8 48" 15-5" 18" 24-30" 48" 24" MO9 M10 M11 Available on 108'' Tops M12-P12 Available on 108'' Tops 24

25 mediatrac1 TM grommet placement Mediatrac1 TM Laminate, Veneer and Solid Surface Grommet Placements 114'' - 120'' Table 10 Seats 20-23" 48 48" 33-36" MO4-PO4 MO8 MO " 8-11" 24-30" 21-24" 72" M10 M11 M12-P12 M13 132'' - 144'' Table 12 Seats 19-23" MO4-PO4 M14-P " 19-25" 5-11" 24" 72" M15-P15 M17 156'' - 168'' Table 14 Seats 27-31" MO4-PO4 M14-P " 48" M17 M18-P18 180'' - 192'' Table 16 Seats MO4-PO4 M18-P18 M20-P20 M21-P21 25

26 mediatrac1 TM grommet placement Mediatrac1 TM Laminate Veneer and Solid Surface Grommet Placements 204'' - 218'' Table 18 Seats MO4-PO4 M20-P20 M21-P21 M22-P22 228'' - 240'' Table 20 Seats MO4-PO4 M22-P22 M25 M26-P26 26

27 mediatrac1 TM grommet placement Mediatrac1 TM Glass Grommet Placements M12 code designates the machining pattern for (2) 24'' Mediatrac TM grommets, sold separately. Glass tops require specific grommets that are specified for use with glass tops. Speakerphone grommets are not available on glass tops. Mediatrac1 TM grommets are available in glass tops in multiple configurations coded with the letter prefix M representing the Mediatrac1 TM grommet options. Polycom grommets are not available on glass tops. Specify grommet locations when ordering tops. Specify grommets separately. Illustration shows the M08 configuration with the Mediatrac1 8'' single door and the 24'' double door grommet 54'' - 60'' Square and Round MO1 MO1 MO3 MO3 60'' - 78'' Table 6 Seats 1/2 1/2 9 "- 21 " 24" 8-14" CENTER 18-24" MO2 MO3 MO4 MO6 MO5 Available on 66'' and 72'' tops 84'' - 90'' Table 6 Seats 1/2 1/2 33 "-36 " 24" 13-16" 5-8" CENTER 24" MO3 MO4 MO5 MO6 MO7 MO8 96'' - 108'' Table 8 Seats 38-50" 11-17" 24" MO4 MO5 MO8 48" 15-18" 24-30" 24" MO9 M10 M12 Available on 108'' Tops 27

28 mediatrac1 TM grommet placement Mediatrac1 TM Glass Grommet Placements 114'' - 120'' Table 10 Seats 20-23" 48 48" 33-36" MO4-PO4 MO8 MO " 8-11" 24-30" M10 M11 M12 Available on 108'' tops 132'' - 144'' Table 12 Seats 19-23" 7-10" 19-25" 24" MO4 M14 M15 156'' - 168'' Table 14 Seats 18-30" 27-31" 48" MO4 M14 M18 180'' - 192'' Table 16 Seats MO4 M18 M20 204'' - 218'' Table 18 Seats MO4 M20 228'' - 240'' Table 20 Seats MO4 M25 28

29 mediatrac1 TM grommets description sku w d h specifications price 8'' single door mediatrac1 TM grommet AAP module specified separately aluminum VAZ '' corded $ grounded outlets, 1 exit plug VAT '' hardwired 875 accepts 2 Extron single space AAP s brushed aluminum frame and lid specify grommet location when HAZ for glass tops only; 120'' corded 901 ordering top HAT for glass tops only; 72'' hardwired 901 laminate/veneer VWZ '' corded grounded outlets, 1 exit plug VWT '' hardwired 1087 accepts 2 Extron single space AAP s brushed aluminum frame with laminate or veneer lid specify grommet location when ordering top specify laminate or veneer lid material code and finish code glass HGZ for glass tops only; 120'' corded grounded outlets, 1 exit plug HGT for glass tops only; 72'' hardwired 1087 accepts 2 Extron single space AAP s brushed aluminum frame with glass lid specify grommet location when ordering top specify lid material code GPW or GEW solid surface VCZ '' corded grounded outlets, 1 exit plug VCT '' hardwired 1087 accepts 2 Extron single space AAP s brushed aluminum frame and solid surface door lid specify grommet location when ordering top specify lid material code SSF and finish code CWG specification codes example: MGS-SKU material + finish code example: WLT 839 series sku grommet lid finish PLL solid laminate see page 6 WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut GPW glass white GEW glass etched white M G S - 29

30 mediatrac1 TM grommets description sku w d h specifications price 8'' double door mediatrac1 TM grommet AAP modules specified separately aluminum VAY '' corded; 2 doors $ grounded outlets, 1 exit plug VAS '' hardwired; 2 doors 1166 accepts 4 Extron single space AAP s brushed aluminum frame and lids specify grommet location when HAY for glass tops only; 120'' corded; 2 doors 1193 ordering top HAS for glass tops only; 72'' hardwired; 2 doors 1193 laminate/veneer VWY '' corded; 2 doors grounded outlets, 1 exit plug VWS '' hardwired; 2 doors 1352 accepts 4 Extron single space AAP s brushed aluminum frame with laminate or veneer lid specify grommet location when ordering top specify laminate or veneer lid material code and finish code glass HGY for glass tops only; 120'' corded; 2 doors grounded outlets, 1 exit plug HGS for glass tops only; 72'' hardwired; 2 doors 1352 accepts 4 Extron single space AAP s brushed aluminum frame with glass lids specify grommet location when ordering top specify lid material code GPW or GEW solid surface VCY '' corded; 2 doors grounded outlets, 1 exit plug VCS '' hardwired; 2 doors 1352 accepts 2 Extron single space AAP s brushed aluminum frame and solid surface lid specify grommet location when ordering top specify lid material code SSF and finish code CWG specification codes example: MGS-SKU material + finish code example: WLT 839 series sku grommet lid finish PLL solid laminate see page 6 WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut GPW glass white GEW glass etched white M G S - 30

31 mediatrac1 TM grommets description sku w d h specifications price 24'' plus double door mediatrac1 TM grommet AAP modules specified separately aluminum VAK '' corded; 2 doors $ grounded outlets, 2 exit plugs VAJ '' hardwired; 2 doors 1802 accepts 8 Extron single space AAP s brushed aluminum frame and lids specify grommet location when HAK for glass tops only; 120'' corded; 2 doors 1829 ordering top HAJ for glass tops only; 72'' hardwired; 2 doors 1829 laminate/veneer VWK '' corded; 2 doors grounded outlets, 2 exit plugs VWJ '' hardwired; 2 doors 1908 accepts 8 Extron single space AAP s brushed aluminum frame with laminate or veneer lids specify grommet location when ordering top specify laminate or veneer lid material code and finish codes glass HGK for glass tops only; 120'' corded; 2 doors grounded outlets, 2 exit plugs HGJ for glass tops only; 72'' hardwired; 2 doors 1908 accepts 8 Extron single space AAP s brushed aluminum frame with glass doors specify grommet location when ordering top specify lid material code GPW or GEW solid surface VCK '' corded; 2 doors grounded outlets, 2 exit plugs VCJ '' hardwired; 2 doors 1908 accepts 8 Extron single space AAP s brushed aluminum frame and solid surface lid specify grommet location when ordering top specify lid material code SSF and finish code CWG specification codes example: MGS-SKU material + finish code example: WLT 839 series sku grommet lid finish PLL solid laminate see page 6 WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut GPW glass white GEW glass etched white M G S - 31

32 mediatrac1 TM grommets description sku w d h specifications price 48'' (4) door mediatrac1 TM grommet AAP modules specified separately aluminum VAW '' corded; 4 doors $ grounded outlets, 2 exit plugs VAQ '' hardwired; 4 doors 2120 accepts 8 Extron single space AAP s brushed aluminum frame and lids specify grommet location when HAW for glass tops only; 120'' corded; 4 doors 2173 ordering top HAQ for glass tops only; 72'' hardwired; 4 doors 2173 laminate/veneer VWW '' corded; 4 doors grounded outlets, 2 exit plugs VWQ '' hardwired; 4 doors 2332 accepts 8 Extron single space AAP s brushed aluminum frame with laminate or veneer lids specify grommet location when ordering top specify laminate or veneer lid material code and finish codes glass HGW for glass tops only; 120'' corded; 4 doors grounded outlets, 2 exit plugs HGQ for glass tops only; 72'' hardwired; 4 doors 2332 accepts 8 Extron single space AAP s brushed aluminum frame with glass lids specify grommet location when ordering top specify lid material code GPW or GEW solid surface VCW '' corded; 4 doors grounded outlets, 2 exit plugs VCQ '' hardwired; 4 doors 2332 accepts 8 Extron single space AAP s brushed aluminum frame and solid surface lid specify grommet location when ordering top specify lid material code SSF and finish code CWG specification codes example: MGS-SKU material + finish code example: WLT 839 series sku grommet lid finish PLL solid laminate see page 6 WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut GPW glass white GEW glass etched white M G S - 32

33 mediatrac1 TM grommets description sku w d h specifications price 72'' (6) door mediatrac1 TM grommet AAP modules specified separately aluminum VAV '' corded; 6 doors $ grounded outlets, 3 exit plugs VAP '' hardwired; 6 doors 2968 accepts 12 Extron single space AAP s brushed aluminum frame and lids specify grommet location when ordering top laminate/veneer VWV '' corded; 6 doors grounded outlets, 3 exit plugs VWP '' hardwired; 6 doors 3286 accepts 12 Extron single space AAP s brushed aluminum frame with laminate or veneer lids specify grommet location when ordering top specify laminate or veneer lid material code and finish codes solid surface VCV '' corded; 6 doors grounded outlets, 3 exit plugs VCP '' hardwired; 6 doors 3286 accepts 12 Extron single space AAP s brushed aluminum frame and solid surface lids specify grommet location when ordering top specify lid material code SSF specification codes example: MGS-SKU material + finish code example: WLT 839 series sku grommet lid finish PLL solid laminate see page 6 WGL woodgrain laminate CHY cherry MPL maple OAK oak WLT walnut M G S - 33

34 mediatrac TM wire management description sku w d h weight specifications price speaker phone grommet VGZ $ 66 polished aluminum communication grommet GNC 3 3 specify with table top order 76 GMT 3 3 field installed 60 die cast zinc brushed or polished aluminum finish fits 2 '' opening specify finish code BA or PA wire management snake VGW silver finish flexible cable management system weighted metal base wire clip VNZ 6 2 1π 49 hooks onto mediatrac TM rail smoke polycarbonate finish 4 included with each table equipment tray VMY use with 20'' or 30'' base 194 silver powdercoat cable sling VMW use with 20'' or 30'' base 194 grey nylon mesh material hooks onto mediatrac TM rails specify with Extron pull-through AAP C-VGY power strip VNY π outlet center; 110v 15 amp 15' plug in cord surge protector UL Listed specification codes example: ACS-SKU finish code example: BA series sku 3 grommet accessories BA brushed aluminum PA polished aluminum A C S - 34

35 mediatrac1 TM extron AAP modules description sku w d h weight specifications price phone/data module VGV 3 - $ 161 Extron AAP one RJ-11 phone barrel female to female single space insert phone/data module VGI Extron AAP one RJ-45 HCI CAT 5e female to female barrel single space insert phone/data module VGJ Extron AAP one RJ-45 female to punch down block leviton CAT5 data single space insert phone/data module VGD Extron AAP two RJ-45 pass-through barrels CAT 5e single space insert phone/data module VGF 3-1Ω 233 Extron AAP two RJ-45 pass-through barrels CAT 5e double space insert phone/data module VGK Extron AAP one RJ-45 female to punch down block leviton CAT6 data single space insert phone/data module VGP Extron AAP two RJ-45 female to punch down block leviton CAT6 data single space insert specification codes example: ACS-SKU series sku accessories A C S - 35

36 mediatrac1 TM extron AAP modules description sku w d h weight specifications price phone/data module VGL 3 - $ 257 Extron AAP two RJ-45 female to punch down block AMP CAT6 data single space insert phone/data module VGM Extron AAP two RJ-45 female to punch down block seimon CAT6 data single space insert phone/data module VGN Extron AAP two RJ-45 female to punch down block ortronics CAT6 data single space insert phone/data module VGQ 3-1Ω 352 Extron AAP two RJ-45 female to punch down block higher than CAT6 data type connectors systomax MGS500 backward compatible double space insert computer/audio/video module VGC Extron AAP 15HD, F-F, 15 pin HD female to female 3.5mm stereo mini jack to solder tabs with silk screen COMPUTER and AUDIO single space insert computer/audio/video module VGE Extron Interface AAP 15HD, F-F, 15 pin VGA female to female 3.5mm stereo mini jack female to female silk screen, COMPUTER and AUDIO single space insert specification codes example: ACS-SKU series sku accessories A C S - 36

37 mediatrac1 TM extron AAP modules description sku w d h weight specifications price computer/audio/video module VG2 3-1 $ 257 Extron AAP 15HD, one DVI-I female to female barrel, single space insert single space insert computer/audio/video module VG Extron AAP HDMI female to HDMI female on 10'' pigtail single space insert computer/audio/video module VG Extron AAP 15-pin HD female to 5 BNC on 8''- 12'' staggered length pigtails 3.5mm stereo mini jack barrel single space insert control/computer module VGR Extron AAP two USB A female to female barrels single space insert computer/audio/video module VGT Extron three RCA with black powdercoat finish female to female barrels single space insert charging module VGU Extron AAP Power Plate charging module 2 5 VCD USB power outlets 2.1 A / 10.5 watts of power for charging mobile devices single space insert specification codes example: ACS-SKU series sku accessories A C S - 37