Phoenix 6.0 Lifeloc Operator and Calibration Technician Exam (renewal)

Transcription

1 Phoenix 6.0 Lifeloc Operator and Calibration Technician Exam (renewal), Inc. Please answer all of the following questions on the operation and calibration of the Phoenix 6.0 Portable Breath Tester. Mark your answers clearly by CIRCLING the letter (A, B, C, etc) that corresponds with your selected answer. Example: Which manufacturer treats their customers the best? A. Drunks-are-us B. C. Ted's Testers. Inc Instructor: Exam Result Please Print Student Date: Name: Company Name: Address: City, State, Zip: Check yes *I understand that completing this test does not make me a BAT and that I must complete additional training to renew my BAT Certificate. Or training@lifeloc.com

2 1) How many tests will the Phoenix 6.0BT store in memory? a) 25 b) 100 c) None d) 250 2) When must the Phoenix 6.0BT be removed from service? a) When it fails one consecutive Calibration Check b) When it gives a user prompt of "Flow Error" c) If the Phoenix 6.0BT requires calibration three times in three consecutive months d) Both A and C 3) What Standard of gas does the Lifeloc recommend for the Phoenix 6.0BT? a).100 b).040 c).038 d).080 4) The DOT does not allow this mode of testing? a) Automatic b) Passive c) Manual d) Manual Override 5) In the Phoenix 6.0BT QAP, Lifeloc recommends following which schedule for calibration? a) Calibrate monthly b) Calibrate every two years c) Calibrate every twelve months d) Calibrate every week 6) The manual mode does not require you to push the Execute button to take a breath sample. 7) What button on your Phoenix 6.0BT acts as the home or escape button? a) Power b) Execute c) There is no button, you must pull the batteries 8) What should you do if the "Low Battery" user prompt appears? a) Turn the unit off/on b) Replace the batteries

3 9) The Phoenix 6.0BT will conduct an Air Blank. 10) What is the time limit between conducting a Calibration and a Calibration Check? a) Sixty seconds b) Two minutes c) Ninety seconds d) Three minutes 11) What button saves any changes you made to a Phoenix 6.0BT User Setting? a) Execute b) Power c) Function d) It is automatic 12) What do you need to do if the user prompt "Log Full" appears? a) Turn the Phoenix 6.0BT off b) Perform an Automatic Test c) Clear the Log 13) The Phoenix 6.0BT automatically compensates for what event? a) Daylight Savings b) Leap Year c) Time Zones 14) How long is a Lifeloc Operator and Calibration Technician Certificate valid before it expires? a) Two years b) Five years c) Ten years d) It has no expiration date 15) Your Breath Alcohol Technician Certificate (BAT) and Lifeloc Certification are the same? 16) What substance will destroy the fuel cell sensor in the Phoenix 6.0BT? a) Mouthwash b) Nicotine c) Gum

4 17) Which of the following is a Calibration/Calibration Check Standard Type? a) Water b) Dry Gas c) Wet Bath Simulator d) Both B and C 18) What button do you push to Manually Override an Automatic Test? a) The Power Button b) The Function Button c) The Execute Button 19) What is the purpose of taking an Air Blank? a) To clear the fuel cell b) To check for the presence of alcohol in the ambient air c) To check the pump 20) What is the maximum allowable transmission coverage area between the Phoenix 6.0BT and the Bluetooth Mobile Printer? a) There is no limit b) 10 feet c) 33 feet 21) By default, the Phoenix 6.0BT is programmed to send and receive secure, encrypted data to the Bluetooth Mobile Printer. 22) The Phoenix 6.0BT is set to discover only Lifeloc devices; you will not be able to print to any other Bluetooth devices. 23) Per the QAP, what are the acceptable calibration check tolerances for the Phoenix 6.0BT? a) +/-.005 BAC of the value of the alcohol standard being used. b) +/-.002 BAC of the value of the alcohol standard being used. c) +/-.02 BAC of the value of the alcohol standard being used. d) +/-.05 BAC of the value of the alcohol standard being used.

5 24) The Phoenix 6.0BT has a Lithium Battery that allows it to keep its memory when the AA batteries are removed. 25) Per the QAP, it is required that the Phoenix 6.0BT be returned to Lifeloc Technologies every two years for a Factory Diagnostic? *Please contact your certified instructor to renew your BAT Certificate or contact to locate the nearest Master Trainer. This successful completion of the test will only renew your Lifeloc CLOCT. Or training@lifeloc.com