9.1.3 Force to retract latch bolt with Thumbpiece (lbf) Compliant/Non: Not applicable

Transcription

1

2 TEST RESULTS AMERICAN NATIONAL STANDARD FOR BORED AND PREASSEMBLED LOCKS AND LATCHES Model Series Function Grade Trim Finish Base Material AGL F81 2 key/lever Date Started: Date Completed: Operational Tests 9.1 Force to Retract Unloaded Bolt /Non: Torque to retract latch bolt by lever - Maximum (lbf in.) Torque to retract latch bolt by knob - Maximum (lbf in.) Knob/Lever Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% Outside CW Outside CCW Inside CW Inside CCW Force to retract latch bolt with Thumbpiece (lbf) /Non: Not applicable Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% Inside Force Outside Force No thumb piece Force to retract latch bolt by Paddle (lbf) /Non: Not applicable Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% Inside Force Outside Force No paddle Torque to retract latch bolt by key, /Non: Not applicable with deadlatch depressed (lbf-in). Key Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% CW CCW Not applicable for locks that allows to be unlocked by the key to permit the bolt to be retracted by operating trim. Page 2 of 15

3 9.1.6 Torque to retract latch bolt by turn. (lbf-in) /Non: Not applicable Turn Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% CW CCW No turn 9.2 Force to Retract Preloaded Bolt. (Warped Door) (lbf in.) with 50 lb load applied Repeat Torque to retract latch bolt by lever - Maximum (lbf in.) Torque to retract latch bolt by knob - Maximum (lbf in.) /Non: Knob/Lever Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% Outside CW Outside CCW Inside CW Inside CCW Force to retract latch bolt with Thumbpiece (lbf) /Non: Not applicable Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% Inside Force Outside Force No thumb piece Force to retract latch bolt by Paddle (lbf) /Non: Not applicable Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% Inside Force Outside Force No paddle Page 3 of 15

4 9.1.5 Torque to retract latch bolt by key, /Non: Not applicable with deadlatch depressed (lbf-in). Key Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% CW CCW Not applicable for locks that allows to be unlocked by the key to permit the bolt to be retracted by operating trim Torque to retract latch bolt by turn. (lbf-in) /Non: Not applicable Turn Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% CW CCW No turn 9.3 Latch Bolt Projection Minimum (in.) /Non: when depressed to dead latched position. Specimen #001 Specimen #002 Specimen #003 Minimum Allowable Initial 50% Initial 50% Initial 50% Initial 50% Projection Dead Latch or Aux. Latch Projection (in.) /Non: at first effective dead locking of latch bolt. Specimen #001 Specimen #002 Specimen #003 Minimum Allowable Initial 50% Initial 50% Initial 50% Initial 50% Projection Force to latch door (lbf) /Non: Force Specimen #001 Specimen #002 Specimen #003 Max Allowable Initial 50% Initial 50% Initial 50% Initial 50% Unlocked Locked Page 4 of 15

5 10 Strength Tests 10.1 Locked Torque Test /Non: Knob/Lever Outside CW Outside CCW inside CCW inside CCW Specimen # Specimen # Specimen # Test Torque Minimum (lbf-in) Axial Load Test - /Non: Knob/Lever Outside Inside Lever Load 2 inches from Spindle (lbf) /Non: Knob/Lever Outside Inside Entry Handleset, outside thumb piece /Non: Not applicable Thumb Piece Outside No handdleset or thumb piece 10.3 Vertical Load Test - /Non: Knob/Lever Outside Inside Page 5 of 15

6 Locked Outside Thumb piece Load /Non: Not applicable Thumb Piece Outside No thumb piece Paddle Load Paddle Mount Vertical Horizontal /Non: Not applicable No paddle Latch Bolt Strength - /Non: Load Latch Bolt End Pressure - /Non: Load Unlocked Outside Lever or Knob Torque Test - /Non: downward for levers, clockwise for knobs Unlocked Test Torque Knob/Lever Minimum (lbf-in) Load Page 6 of 15

7 10.7 Unlocked Entry Handleset Load Test /Non: Not applicable Unlocked Handleset Load No handleset 10.8 Qualification Requirements /Non: 9.1 Force to Retract Unloaded Bolt /Non: Torque to retract latch bolt by lever - Maximum (lbf in.) Torque to retract latch bolt by knob - Maximum (lbf in.) Knob/Lever Outside CW Outside CCW Inside CW Inside CCW Specimen #004 Specimen #005 Specimen #006 Maximum Allowed Torque (lbf-in) Force to retract latch bolt with Thumbpiece (lbf) /Non: Inside Force Outside Force Not applicable Force Maximum (lbf) No thumb piece Force to retract latch bolt by Paddle (lbf) /Non: Not applicable Force Maximum (lbf) Inside Force Outside Force No paddle Page 7 of 15

8 9.1.5 Torque to retract latch bolt by key, /Non: Not applicable with deadlatch depressed. (lbf-in) Key Maximum Allowed Torque (lbf-in) CW CCW Not applicable for locks that allows to be unlocked by the key to permit the bolt to be retracted by operating trim Torque to retract latch bolt by turn. (lbf-in) /Non: Not applicable Turn Maximum Allowed Torque (lbf-in) CW CCW No turn 9.2 Force to Retract Preloaded Bolt (Warped Door) (lbf in.) with 50 lb load applied Repeat Torque to retract latch bolt by lever - Maximum (lbf in.) Torque to retract latch bolt by knob - Maximum (lbf in.) /Non: Knob/Lever Outside CW Outside CCW Inside CW Inside CCW Maximum Allowed Torque (lbf-in) Force to retract latch bolt with Thumbpiece (lbf) /Non: Inside Force Outside Force Not applicable Force Maximum (lbf) No thumb piece Page 8 of 15

9 9.1.4 Force to retract latch bolt by Paddle (lbf) /Non: Not applicable Force Maximum (lbf) Inside Force Outside Force No paddle Torque to retract latch bolt by key, /Non: Not applicable with deadlatch depressed. (lbf-in) Key Maximum Allowed Torque (lbf-in) CW CCW Not applicable for locks that allows to be unlocked by the key to permit the bolt to be retracted by operating trim Torque to retract latch bolt by turn. (lbf-in) /Non: Not applicable Turn Maximum Allowed Torque (lbf-in) CW CCW No turn 9.3 Latch Bolt Projection Minimum (in.) /Non: when depressed to dead latched position. Minimum (inches) Projection Lever can not deflect 3/8", nor can it touch the door with 25lbf at 2" from spindle. /Non: Standard Lever Deflection (in) Did lever touch the door? (Y/N) N N N 3/8 N Page 9 of 15

10 The lever rotational position shall be within 22.5 degrees of the original resting position. Grade 1 only /Non: Not applicable Lever rotation Standard For grade 1 only 11 Cycle Test 3 samples /Non: Rotation Counter Reading Date Technician's Initials Alan Lai 58, Alan Lai 120, Alan Lai 155, Alan Lai 200, Alan Lai 237, Alan Lai 275, , Alan Lai Alan Lai 400, Alan Lai 11.5 Performance After Cycle Test /Non: Are locks operative in all respects including dead locking of the Yes latch bolt? No 11.6 Cylinder Cycle Test - 1 sample /Non: Rotation Counter Reading Date Technician's Initials Alan Lai 14, Alan Lai Alan Lai Are locks operative in all respects including dead locking of Yes the latch bolt? No Page 10 of 15

11 12 Security Tests 12.1 Dead Latch and Strike Impact Test /Non: Sample No.: #007 Impacts 2 blows of 60ft-lbf Operable Entry 2 blows of 90ft-lbf Inoperable Non-Entry 12.2 Abusive Locked Lever Test - /Non: Not applicable Outside Locked Levers - Grade 1 only Sample No.: Load Torque Applied Operable Entry Inoperable Non-Entry 9.3 Dead Latch Projection: 9.4 Aux. Projection to Dead Latch: Measured (in.) Minimum (in.) For grade 1 levers only 12.3 Locked Lever or Paddle Vertical Impact Test /Non: Not applicable Grade 1 only Sample No.: Impacts Operable Entry Inoperable Non-Entry Paddle Mount Vertical Horizontal Measured Inside Paddle Force Inside Paddle Force Max. For grade 1 levers only Page 11 of 15

12 12.4 Locked Cylinder in the Lever Face Impact Test /Non: Not applicable Grade 1 only Sample No.: Impacts mpacts Conducted Operable Entry Inoperable Non-Entry For grade 1 lever only 12.5 Locked Lever or Knob Catch Attack Test /Non: Complaint Sample No.: #008 Catch Force (lbf) Axial Force (lbf) Applied Force Operable Entry Inoperable Non-Entry 12.6 Cylinder Assembly Pulling Test /Non: Grade 1: Tension 500 lbf Measured Tension: 300 lbf Sample #009 Grade 2: Tension 300 lbf Grade 3: Tension 250 lbf Operable Entry Grade achieved: 2 Inoperable Non-Entry Comments 12.7 Cylinder Assembly Torque Test /Non: Grade 1: Torque 300 lbf-in Measured Torque: 150 lbf-ft Sample #010 Grade 2: Torque 150 lbf-in Grade 3: Torque 120 lbf-in Operable Entry Grade achieved: 2 Inoperable Non-Entry Comments Page 12 of 15

13 13 Material Evaluation Tests 13.1 Knob Crush Test /Non: Not applicable Compression Load: 1000 lbf Sample No.: Deformation Initial Diam. Final Diam. % Max Allowable (%) Outside Knob Inside Knob Measured (lbf-in) Maximum Allowable (lbf-in) Key Torque-At Test Completion CW CCW Not applicable for lever lock 13.2 Rose Assembly Dent Test /Non: Drop an 8 ounce projectile from a height of 12" in a drop tube Sample No.: #014 Measured Depth (in) Max. Depth Allowable (in) Inside Outside Outside Rose Deformation Test /Non: Sample No.: #014 Initial Rose Width (in) Load (lbf) Final Rose Width (in) Min. Allowable (in) Page 13 of 15

14 Product Photo Product Drawing Page 14 of 15

15 Revision Page Revision No. Date Changes Author Reviewer Original May 20, 2013 First issue Alan Lai Blusea Dong Page 15 of 15