Updated: March 2012 TXDOT ENGINEERING SOFTWARE SUPPORT INFORMATION. UT Curved Girder Analysis Tools (UTCGAT)
|
|
- Hubert Fisher
- 5 years ago
- Views:
Transcription
1 Updated: March 2012 TXDOT ENGINEERING SOFTWARE UT Curved Girder Analysis Tools (UTCGAT)
2 This living document provides end-user support information for the UT Curved Girder Analysis Tools (UTCGAT) suite. This support information will be updated, as needed, to remain current. CONTENTS CONTENTS... 2 ABOUT UTCGAT... 3 GENERAL... 4 Technical Support... 4 Reporting Problems... 4 Contact Information... 4 Release History and Support Status... 4 Determining Program Version Number... 4 Windows XP... 4 Windows VERSION Status... 5 Installing and Removing the Software... 5 Summary of Changes... 5 Known Problems... 5 Page 2 of 5
3 ABOUT UTCGAT UTCGAT is a suite of software tools for analysis of curved girders. The suite consists of UT Bridge and UT Lift. UT Bridge is a 3-dimensional finite element program for the analysis of curved steel I-girders. Computations include linear elastic analysis and eigenvalue buckling analysis for both girder erection and concrete deck placement. UT Bridge guides the user through input of geometric properties, girder cross-section, construction analysis cases, and analysis type using an input wizard. The user can view a 3-dimensional bridge model showing displacement and critical points, and graphs of stresses, displacements, and rotations. Output is also available in exportable, tabular form. UT Lift is an easy to use, macro-programmed Excel spreadsheet for determining the safety of lifting a horizontally curved steel I-girder with one crane and two lift clamps. The user inputs geometric properties of the girder and length of the segment being lifted. Two output options are available: 1) location of the girder segment s center of gravity, the lift clamps location that results in zero rigid body rotation and equal lift clamp forces, and the reactions of the lift clamps; 2) for specified lift locations, the girder rotation, lift clamp reactions, and critical buckling load estimate. The spreadsheet allows for the analysis of a girder segment with up to 8 different cross sections and 18 cross frames attached. Page 3 of 5
4 GENERAL Product Name: Current Release: Version Technical Support The TxDOT Bridge Division provides technical support for this product. See Contact Information section below. Non-TxDOT users may request technical support when this product is used to perform services for department. Reporting Problems TxDOT is committed to correcting problems associated with this software product. Users are encouraged to report problems that they experience using this product. Contact Information To request technical support or to report problems contact: Texas Department of Transportation - Bridge Division TxDOT_UTBridgeLiftHelp@txdot.gov Also refer to the Frequently Asked Questions (FAQ) webpage: UT Bridge & UT Lift FAQs Release History and Support Status Version Release Date Support Status March 2012 Supported Determining Program Version Number Windows XP From the Windows menubar, go to: START->SETTINGS->CONTROL_PANEL- >ADD_REMOVE_PROGRAMS. Find and click the entry for UT Curved Girder Analysis Tools (UTCGAT). Click on the link that appears labeled Click here for support information. Among the support information that displays is the product version number. Windows 7 From the Windows menubar, go to: START-> CONTROL_PANEL- >PROGRAMS_AND_FEATURES. Find and click the entry for UT Curved Girder Analysis Tools (UTCGAT). Beneath the listbox of programs and features appears product support information. Among the support information that displays is the product version number. The version number displayed in this way is that of the suite itself. The splash screens and About dialog boxes for each product of the suite display the version numbers for each particular product. Page 4 of 5
5 VERSION Status UTCGAT version is the current production release. This is the first release of the suite of bridge related products developed by the University of Texas at Austin. Version is composed of the two products UT Bridge version 1.5 and UT Lift version 1.1. UT Bridge has been released standalone before as version 1.0, 1.2 and 1.5. UT Lift is a new product. This suite of tools will replace any previous standalone version of UT Bridge including standalone UT Bridge version 1.5. Installing and Removing the Software Non-Texas DOT Users Reference the product distribution README file, included in the software distribution package. Texas DOT Users Work with local Information Resources personnel for installation and uninstallation via LANDesk software deployment. Summary of Changes This release is a repackaging of the existing UT Bridge product version 1.5 with the addition of the UT Lift product version 1.1. Known Problems Known problems will be listed here as they are reported. This is a living document. Page 5 of 5
UT Lift 1.2. Users Guide. Developed at: The University of Texas at Austin. Funded by the Texas Department of Transportation Project (0-5574)
UT Lift 1.2 Users Guide Developed at: The University of Texas at Austin Funded by the Texas Department of Transportation Project (0-5574) Spreadsheet Developed by: Jason C. Stith, PhD Project Advisors:
More informationParametric study on behaviour of box girder bridges using CSi Bridge
Parametric study on behaviour of box girder bridges using CSi Bridge Kiran Kumar Bhagwat 1, Dr. D. K. Kulkarni 2, Prateek Cholappanavar 3 1Post Graduate student, Dept. of Civil Engineering, SDMCET Dharwad,
More informationAbaqus Composites Tutorial
Abaqus Composites Free PDF ebook Download: Abaqus Composites Download or Read Online ebook abaqus composites tutorial in PDF Format From The Best User Guide Database Design and Sizing composites structures
More informationDTN Biodiesel Documentation
DTN Biodiesel Documentation Table of Contents Biodiesel edition Download Instructions...1 Launching ProphetX and the BioDiesel Workbook...3 The BioDiesel Workbook...5 CBOT and NYMEX...5 Soybean Cash Prices
More informationMDOT Load Rating Program
Presentation Outline FHWA Audit & Action Plan Prioritization list Announcements and updates Bridge load rating assistance program Virtis load rating software MDOT Load Rating Program 2009 FHWA Audit, Final
More informationPRELIMINARY REVIEW COPY
PRELIMIAR REVIEW COP. Report o. Preliminary Review Copy 4. Title and Subtitle A EXPLORATIO OF LATERAL LOAD DISTRIBUTIO I A GIRDER-SLAB BRIDGE I GATESVILLE, TEXAS Technical Report Documentation Page 2.
More informationDESIGN AND DYNAMIC ANALYSIS OF 120 Ton CAPACITY EOT CRANE GIRDER
DESIGN AND DYNAMIC ANALYSIS OF 120 Ton CAPACITY EOT CRANE GIRDER 1 N.PAVAN KUMAR PATNAIK, 2 Dr. V. NAGA BHUSHANA RAO 1M.tech Student, Department of Mechanical Engineering, Raghu Institute of Technology,
More informationME scope Application Note 29 FEA Model Updating of an Aluminum Plate
ME scope Application Note 29 FEA Model Updating of an Aluminum Plate NOTE: You must have a package with the VES-4500 Multi-Reference Modal Analysis and VES-8000 FEA Model Updating options enabled to reproduce
More informationCase Study of Bridge Load Rating in KY using BrR. C.Y. Yong, P.E., S.E., ENV-SP
Case Study of Bridge Load Rating in KY using BrR C.Y. Yong, P.E., S.E., ENV-SP Project Overview Choosing the Right Tool Validation Challenges Conclusions Outline KY Bridge Load Rating Horizontally curved
More informationEnterprise Fleet Management System
Enterprise Fleet Management System University of Wisconsin Portal User Guide Link: https://fleetportal.wi.gov Contents Introduction and Login...2 Getting Started Log-in Page...3 Home Page...4 Completing
More informationTable Standardized Naming Convention for ERD Files
S-1 (2399) PAVEMENT SURFACE SMOOTHNESS (2013 version) DO NOT REMOVE THIS. IT NEEDS TO STAY IN FOR THE CONTRACTORS. Always use with SP2005-111 (CONCRETE PAVING MIX SPECIFICATIONS PAVEMENT) and SP2005-140
More informationBracket and Assembly Dimensions
INSTALLATION GUIDE NI PS-14/15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-14/15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-14/15/16/17
More informationA, B, C Permit Truck Classification Calculator
A, B, C Permit Truck Classification Calculator For bridge overweight permitting purposes, the A, B, C Permit Truck Classification calculator is a tool developed to determine the weight classification of
More informationANALYTICAL EVALUATION OF TEXAS BRIDGE RAILS TO CONTAIN BUSES AND TRUCKS
ANALYTCAL EVALUATON OF TEXAS BRDGE RALS TO CONTAN BUSES AND TRUCKS SUMMARY REPORT of Research Report Number 23-2 Study 2-5-78-23 Cooperative Research Program of the Texas Transportation nstitute and the
More informationSubstringer system with 5 main girders = 11,100,000 lb (97 lb/sf) Multi-girder system with 8 main girders = 11,000,000 lb (96 lb/sf)
Memo To: John Clute Iowa Department of Transportation, Bridge Division From: Gary Krupicka \ Todd Horton Project: NHSX-34-1(68)--3H-65 CC: Brad Hofer (IaDOT), Matt Tondl (HDR) Date: March 6, 2006 Job No:
More informationAPPENDIX G OWNER/AGENCY POLICIES AND PROCEDURES
APPENDIX G OWNER/AGENCY POLICIES AND PROCEDURES Task 2 of NCHRP Project 12-79 involved the synthesis of pertinent owner/agency policies and practices. To this end: 1. The Project Team coordinated with
More informationLOADS BRIDGE LOADING AND RATING. Dead Load. Types of Loads
BRIDGE LOADING AND RATING LOADS 0 1 Types of Loads Bridges are subjected to many different types of loads. There are three important types of bridge loads: Dead load Live load Other loads Dead Load Dead
More informationUSING NSBA S LRFD SIMON SOFTWARE FOR PRELIMINARY DESIGN OF A CURVED HAUNCHED STEEL PLATE GIRDER BRIDGE
USING NSBA S LRFD SIMON SOFTWARE FOR PRELIMINARY DESIGN OF A CURVED HAUNCHED STEEL PLATE GIRDER BRIDGE THOMAS DENSFORD BIOGRAPHY Thomas Densford, P.E. is a Sr. Principal Engineer with the firm Fay, Spofford
More informationBenefit-Cost Analysis of Curve Safety Treatments. Bryan Wilson, Brad Brimley Texas A&M Transportation Institute
Benefit-Cost Analysis of Curve Safety Treatments Bryan Wilson, Brad Brimley Texas A&M Transportation Institute B/C Analysis B/C analysis encouraged by TxDOT HSIP HSIP calls the ratio a Safety Improvement
More informationModular Analysis of Main Rotor Blade of Light Helicopter using FEM
Modular Analysis of Main Rotor Blade of Light Helicopter using FEM Mahesh N V 1, Raghu T 2 Schlor, IVth Semester M. Tech(Design Engineering), 2 Assistant Professor 1, 2 Mechanical Engineering Department
More informationPlate Girder and Stiffener
Plate Girder and Stiffener (Gelagar Pelat dan Pengaku) Dr. AZ Department of Civil Engineering Brawijaya University Introduction These girders are usually fabricated from welded plates and thus are called
More informationDISTRIBUTION: Electronic Recipients List TRANSMITTAL LETTER NO. (15-01) MINNESOTA DEPARTMENT OF TRANSPORTATION. MANUAL: Road Design English Manual
DISTRIBUTION: Electronic Recipients List MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards Unit ISSUED BY: Office of Project Management and Technical Support TRANSMITTAL LETTER NO.
More informationTechnical Service Information Bulletin
Technical Service Information Bulletin April 24, 1998 All 94 through 98 models, and 99 RX 300 BO001 98 BODY TSB Update Notice: The information contained in this TSB updates BO007 97 dated October 24, 1997.
More informationAutomotive Powertrain Assembly Analysis with Abaqus
Automotive Powertrain Assembly Analysis with Abaqus Seminar Lecture 1 Lecture 2 Lecture 3 Lecture 4 Lecture 5 Lecture 6 Introduction and Motivation Contact Gaskets and Bolt Loading Thermal Stress Analysis
More informationAnalysis Methods for Skewed Structures. Analysis Types: Line girder model Crossframe Effects Ignored
Analysis Methods for Skewed Structures D Finite Element Model Analysis Types: Line girder model Crossframe Effects Ignored MDX Merlin Dash BSDI StlBridge PC-BARS Others Refined model Crossframe Effects
More informationCONVEYOR DESIGN PROGRAM USER MANUAL
CONVEYOR DESIGN PROGRAM USER MANUAL INTRODUCTION PPI s Conveyor Design Program is a web based application for conveyor horsepower calculation, selection of pulleys and idlers, and selection of take-up
More informationChapter 1: Battery management: State of charge
Chapter 1: Battery management: State of charge Since the mobility need of the people, portable energy is one of the most important development fields nowadays. There are many types of portable energy device
More informationImpact of Heavy Loads on State and Parish Bridges. Aziz Saber, Ph.D., P.E. Program Chair Civil Engineering Louisiana Tech University
Impact of Heavy Loads on State and Parish Bridges Aziz Saber, Ph.D., P.E. Program Chair Civil Engineering Louisiana Tech University Acknowledgement Funds from Louisiana Transportation Research Center LA
More informationFLEC AIR PUMP Operators Manual JULY QUI-1030 VERSION 1.2
FLEC AIR PUMP 1001 Operators Manual JULY 2009 QUI-1030 VERSION 1.2 This page left intentionally blank FLEC AIR PUMP 1001 Operators Manual Contents 1. Introduction 4 2. Operating instructions 5 2.1. Operating
More informationATLAS PUBLIC POLICY WASHINGTON, DC USA PUBLISHED MAY 2017 VERSION 2.0
EV CHARGING FINANCIAL ANALYSIS TOOL USER GUIDE A FREE TOOL DESIGNED TO EVALUATE THE FINANCIAL VIABILITY OF EV CHARGING INFRASTRUCTURE INVESTMENTS INVOLVING MULTIPLE PRIVATE PUBLISHED MAY 2017 VERSION 2.0
More informationA Model for the Characterization of the Scrap Tire Bale Interface. B. J. Freilich1 and J. G. Zornberg2
GeoFlorida 21: Advances in Analysis, Modeling & Design 2933 A Model for the Characterization of the Scrap Tire Bale Interface B. J. Freilich1 and J. G. Zornberg2 1 Graduate Research Assistant, Department
More informationFinite Element Analysis of Clutch Piston Seal
Finite Element Analysis of Clutch Piston Seal T. OYA * F. KASAHARA * *Research & Development Center Tribology Research Department Three-dimensional finite element analysis was used to simulate deformation
More informationME scope Application Note 25 Choosing Response DOFs for a Modal Test
ME scope Application Note 25 Choosing Response DOFs for a Modal Test The steps in this Application Note can be duplicated using any ME'scope Package that includes the VES-3600 Advanced Signal Processing
More informationThe Effect of Wheel Loading on a Railway Bridge: A Case Study on Minnamurra Railway Bridge
The Effect of Wheel Loading on a Railway Bridge: A Case Study on Minnamurra Railway Bridge Presented Dr. Olivia Mirza Dr. MD Kamrul Hassan, Emile Assaf, Thy Pham and Guy Stanshall Western Sydney University
More informationSeries 1580 dynamometer and thrust stand datasheet
Series 1580 dynamometer and thrust stand datasheet Typical use Inrunner and outrunner brushless motor characterization (0 40A) Propeller characterization Servo testing and control Battery endurance testing
More information126 Ridge Road Tel: (607) PO Box 187 Fax: (607)
1. Summary Finite element modeling has been used to determine deflections and stress levels within the SRC planar undulator. Of principal concern is the shift in the magnetic centerline and the rotation
More informationFINITE ELEMENT METHOD IN CAR COMPATIBILITY PHENOMENA
Journal of KONES Powertrain and Transport, Vol. 18, No. 4 2011 FINITE ELEMENT METHOD IN CAR COMPATIBILITY PHENOMENA Marcin Lisiecki Technical University of Warsaw Faculty of Power and Aeronautical Engineering
More informationTxDOT TRAFFIC INCIDENT MANAGEMENT UPDATE. ITS Texas 2016
TxDOT TRAFFIC INCIDENT MANAGEMENT UPDATE ITS Texas 2016 November 10, 2016 TxDOT- Traffic Operations Division November 10, 2016 Performance Measures (Lonestar ATMS) Lonestar ATMS Upgraded to Support Incident
More informationSection 6. Ride Specification Special Provisions Step-by-Step Ride Guide for Inspectors and Project Engineers
Section 6 Ride Specification 2399 Special Provisions Step-by-Step Ride Guide for Inspectors and Project Engineers 2 2399 PAVEMENT SURFACE SMOOTHNESS 2399.1 DESCRIPTION This work consists of measuring the
More informationMonitoring of Shoring Pile Movement using the ShapeAccel Array Field
2359 Royal Windsor Drive, Unit 25 Mississauga, Ontario L5J 4S9 t: 905-822-0090 f: 905-822-7911 monir.ca Monitoring of Shoring Pile Movement using the ShapeAccel Array Field Abstract: A ShapeAccel Array
More informationDynamic Design Analysis Method (DDAM) Response Spectrum Analysis with Abaqus
Abaqus Technology Brief TB-05-DFA-1 Revised: April 2007. Dynamic Design Analysis Method (DDAM) Response Spectrum Analysis with Abaqus Summary The Dynamic Design Analysis Method (DDAM) is a U.S. Navy methodology
More informationLBL CALIBRATION. Kongsberg Simrad AS - Training Department LBL Calibration - page 1
LBL CALIBRATION Kongsberg Simrad AS - Training Department LBL Calibration - page 1 INTRODUCTION The purpose of this section is to give you some of the theoretical background information needed for LBL
More informationUniversity of TN Chattanooga Physics 1040L 8/28/2012
PHYSICS 1040L LAB 5: MAGNETIC FIELD Objectives: 1. Determine the relationship between magnetic field and the current in a solenoid. 2. Determine the relationship between magnetic field and the number of
More information101 st T.H.E. Conference February 24,2015
101 st T.H.E. Conference February 24,2015 Design & Construction of Skewed & Curved I-Girder Bridges How Do These Bridges FIT Together? Steel: The Bridge Material of Choice National Steel Bridge Alliance
More informationFEM ANALYSIS OF CONNECTING ROD FOR STATIONARY ENGINE. Republic
FEM ANALYSIS OF CONNECTING ROD FOR STATIONARY ENGINE P. Brabec, P. Kefurt, C. Scholz, R. Voženílek Technical University of Liberec, Hálkova, Liberec, Czech Republic BEZ MOTORY, a.s., Plotiště nad Labem,
More informationValveLink SNAP-ON Application
AMS Device Manager Product Data Sheet ValveLink SNAP-ON Application Communicate with both HART and Foundation Fieldbus FIELDVUE digital valve controllers in the same application Online, in-service performance
More informationStability of Straight Steel Plate Girders in Construction
Stability of Straight Steel Plate Girders in Construction By: Robert Gale, PE 1 Background: Stability problems during superstructure construction is a rare occurrence, but can have large implications for
More informationTable of Contents 1. INTRODUCTION GENERAL INFORMATION-ABOUT OBDII/EOBD PRODUCT DESCRIPTIONS OPERATIONS...11
Table of Contents 1. INTRODUCTION...1 2. GENERAL INFORMATION-ABOUT OBDII/EOBD...1 2.1 ON-BOARD DIAGNOSTICS (OBD) II...1 2.2 DIAGNOSTIC TROUBLE CODES (DTCS)...2 2.3 LOCATION OF THE DATA LINK CONNECTOR (DLC)...3
More informationStress/Strain Apparatus AP-8214
Instruction Manual 012-09424B Stress/Strain Apparatus AP-8214 C D E F G B ( 7) H A I Included Equipment Part Number A. Stress/Strain Apparatus AP-8214 B. Test Coupons, 10 pieces each sample (sample containers
More informationQuaSAR Quantitative Statistics
QuaSAR Quantitative Statistics QuaSAR is a program that aids in the Quantitative Statistical Analysis of Reaction Monitoring Experiments. It was designed to quickly and easily convert processed SRM/MRM-MS
More informationINTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL Volume 1, No 4, 2011
Numerical modal analysis of Howell Bunger valve using FEM method Farid Vakili Tahami, Mohammad Zehsaz, Mohammad Ali Saeimi Sadigh, Amin Paykani Department of Mechanical Engineering, University of Tabriz,
More informationEXPERIMENTAL AND NUMERICAL STUDIES OF THE SCISSORS-AVLB TYPE BRIDGE
EXPERIMENTAL AND NUMERICAL STUDIES OF THE SCISSORS-AVLB TYPE BRIDGE Wieslaw Krason, wkrason@wat.edu.pl Jerzy Malachowski, jerzy.malachowski@wat.edu.pl Department of Mechanics and Applied Computer Science,
More informationComprehensive Evaluation of Fracture Critical Bridges
University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Nebraska Department of Transportation Research Reports Nebraska LTAP 2-2014 Comprehensive Evaluation of Fracture Critical
More informationa. Open the Lab 2 VI file in Labview. Make sure the Graph Type is set to Displacement (one of the 3 tabs in the graphing window).
Lab #2 Free Vibration (Experiment) Name: Date: Section / Group: Part I. Displacement Preliminaries: a. Open the Lab 2 VI file in Labview. Make sure the Graph Type is set to Displacement (one of the 3 tabs
More informationDESCRIPTION This work consists of measuring the smoothness of the final concrete or bituminous surface.
2399 PAVEMENT SURFACE SMOOTHNESS 2399.1 DESCRIPTION This work consists of measuring the smoothness of the final concrete or bituminous surface. A Definitions The Department defines Smoothness as the Mean
More informationIntroduction to Tube and PipeChapter1:
Chapter 1 Introduction to Tube and PipeChapter1: This chapter introduces you to the tube and pipe environment in Autodesk Inventor Professional. Using the tube and pipe environment, you can create rigid
More informationCALIBRATION PROCEDURE NI Channel, ±0.5 V, 24-Bit Simultaneous, Channel-to-Channel Isolated Analog Input Module
CALIBRATION PROCEDURE NI 9238 4-Channel, ±0.5 V, 24-Bit Simultaneous, Channel-to-Channel Isolated Analog Input Module This document contains the verification and adjustment procedures for the NI 9238.
More informationShops Enter Repair and Failure Information for Plants
Shops Enter Repair and Failure Information for Plants Tango Repair Tracker Standardizes Root Cause Analysis and Repair Reporting When a piece of plant mechanical equipment fails, the plant usually records
More informationSoft-Engine - Software 2TTool 2.0
Soft-Engine - Software 2TTool 2.0 Main features 2TTOOL is a software by Soft-Engine which is very easy to use and includes all you may need for a 2-stroke engine conception with a special focus on practical
More informationTORQUE CALIBRATION USING THE PROEDIT PROCEDURE WIZARD AND CALIBRATING USING PROCAL
TORQUE CALIBRATION USING THE PROEDIT PROCEDURE WIZARD AND CALIBRATING USING PROCAL - Overview Torque Calibration The Transmille 3000A Series torque calibration option uses the EA014 Torque adapter, a transducer
More informationRemoval of Underground Storage Tanks (UST) Encountered during Construction
Removal of Underground Storage Tanks (UST) Encountered during Construction Technical Guide Environmental Affairs Division TxDOT Environmental Affairs Division Release Date: 2/2014 510.06.GUI Version 1
More informationBOLTIGHT Ltd Hydraulic Bolt Tensioning
BOLTIGHT Ltd Hydraulic Bolt Tensioning The Company Location Walsall UK All tooling is designed and manufactured in the UK Design and manufacture hydraulic bolt tensioning equipment Innovation. Market leading
More informationAPS 420 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The APS 420 ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying
More informationEnterprise Fleet Management System
Enterprise Fleet Management System University of Wisconsin Portal User Guide Link: https://fleetportal.wi.gov Contents Introduction and Login...2 Getting Started Log-in Page...3 Home Page...4 Completing
More informationGravity Control Technologies Phase II - Manned Prototype
archived as http://www.stealthskater.com/documents/gct_04.pdf read more of GCT at http://www.stealthskater.com/ufo.htm#gct note: because important websites are frequently "here today but gone tomorrow",
More informationPROCEDURE EXTRUDED HOT TAP & LINE STOP TEES DESIGN & MANUFACTURING VALIDATION
6534 Petropark Dr. Houston, TX 77041 USA Tel: +1 713-937-6193 Fax: +1 713-937-8695 www.uni-forge.com PROCEDURE EXTRUDED HOT TAP & LINE STOP TEES DESIGN & MANUFACTURING VALIDATION Prepared by: Approved
More information1962: HRCS Circular 482 one-page document, specified vehicle mass, impact speed, and approach angle for crash tests.
1 2 3 1962: HRCS Circular 482 one-page document, specified vehicle mass, impact speed, and approach angle for crash tests. 1973: NCHRP Report 153 16-page document, based on technical input from 70+ individuals
More informationCopyright By Andrew Clayton Schuh 2008
Copyright By Andrew Clayton Schuh 2008 Behavior of Horizontally Curved Steel I-Girders During Lifting by Andrew Clayton Schuh, B.S.C.E Thesis Presented to the Faculty of the Graduate School of The University
More informationVehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA)
Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA) G. S. Choi and H. K. Min Kia Motors Technical Center 3-61 INTRODUCTION The reason manufacturers invest their time
More informationMOTORCYCLE SAFETY. FY 14 Motorcycle Safety Assessment
MOTORCYCLE SAFETY FY 14 Motorcycle Safety Assessment Introduction Texas Motorcycle Safety Assessment The assessment program offers States a tool to use over time to review their motorcycle safety program,
More informationNCDOT s Recent Experience With Static Load Testing on Large Prestressed Concrete Piles
NCDOT s Recent Experience With Static Load Testing on Large Prestressed Concrete Piles Michael Valiquette NCDOT Geotechnical Engineering Unit October 29, 2014 Oregon Inlet Gallant s Channel Cape Fear River
More informationDYNAMIC PILE TESTING 10/26/ General.
te: The MoDOT LRFD Bridge Design Manual indicates that the frequency of dynamic pile testing should be 1 to 10% of the number of piles. Additionally, the frequency of initial driving tests and restrike
More informationBrake caliper machining: improve process control and reduce inspection costs
Case brief Brake caliper machining: improve process control and reduce inspection costs Reduce part costs Full traceability High accuracy automated shop floor gauging Overview Manufacturers of brake calipers
More informationGETTING STARTED USING LOTUS VEHICLE SIMULATION V ERSION 3.11
GETTING STARTED USING LOTUS VEHICLE SIMULATION V ERSION 3.11 The information in this document is furnished for informational use only, may be revised from time to time, and should not be construed as a
More informationOnline Capacity Tester MK70 User and PC-Software Manual
Online Capacity Tester MK70 User and PC-Software Manual User manual Online-Battery-Tester - 2 User manual Online-Battery-Tester - 3 Introduction: With this processor controlled capacity tester you can
More informationSIGN PLACEMENT CONDITIONS AND REQUIREMENTS
SIGN PLACEMENT CONDITIONS AND REQUIREMENTS 1. Where possible, no signboard shall be closer than twenty-five (25) feet from the centerline of tangent main track. Applications will be accepted and reviewed
More informationAPS 113 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying dynamic
More informationTRAFFIC DEPARTMENT 404 EAST WASHINGTON BROWNSVILLE, TEXAS City of Brownsville Speed Hump Installation Policy
A. GENERAL Speed humps are an effective and appropriate device for safely reducing vehicle speeds on certain types of streets when installed accordance with the provisions of this policy. In order for
More informationLoad Rating in Michigan
Load Rating in Michigan February 22, 2006 Why Load Rate Bridges Public Safety Federal and State Requirements Bridge Preservation Load Rating Influences: NBI Item 67 (Structural Evaluation) Structurally
More informationHi-Z USB Wireless. Introduction/Welcome
Hi-Z USB Wireless Introduction/Welcome Thank you for selecting the Hi-Z Antennas USB Wireless system. The Hi-Z USB Wireless system provides control functions from a personal computer to operate a Hi-Z
More informationCFIRE December 2009
i BRIDGE ANALYSIS AND EVALUATION OF EFFECTS UNDER OVERLOAD VEHICLES (PHASE 1) CFIRE 02-03 December 2009 National Center for Freight & Infrastructure Research & Education College of Engineering Department
More informationAMS ValveLink SNAP-ON Applications
Product Data Sheet AMS ValveLink SNAP-ON Applications n Communicate with both HART and FOUNDATION fieldbus FIELDVUE digital valve controllers in the same application n Online, in-service performance diagnostics
More informationCUSTOMER - FREQUENTLY ASKED QUESTIONS
CUSTOMER - FREQUENTLY ASKED QUESTIONS Version 1 EROAD ELD Do you allow yard moves and personal conveyance and how does this work? Yes, the EROAD ELD allows yard moves (ON YM) and personal conveyance (OFF
More informationMETAL BEAM GUARDFENCE TRANSITION AND END TREATMENT IDENTIFICATION GUIDE
2016 TxDOT Design Division METAL BEAM GUARDFENCE TRANSITION AND END TREATMENT IDENTIFICATION GUIDE A guide to help TxDOT employees identify metal beam guardfence transitions and end treatments for the
More informationSchedule 18 (Technical Requirements) DBFO Agreement EXECUTION VERSION APPENDIX B - SELECT DEPARTMENT STANDARD DRAWINGS AND REFERENCE TABLES
Schedule (Technical Requirements) DBFO Agreement EXECUTION VERSION APPENDIX B - SELECT DEPARTMENT STANDARD DRAWINGS AND REFERENCE TABLES Schedule (Technical Requirements) DBFO Agreement EXECUTION VERSION
More informationDepth of Bury Tables 9B-5. A. General. B. Rigid Pipe Assumptions. Design Manual Chapter 9 - Utilities 9B - Trench Design
Design Manual Chapter 9 - Utilities 9B - Trench Design 9B-5 Depth of Bury Tables A. General The depth of bury tables on the following pages are based upon the design methodology from the various pipe material
More informationEnterprise Fleet Management System
Enterprise Fleet Management System University of Wisconsin Portal User Guide Link: https://fleetportal.wi.gov Introduction and Login The new Enterprise Fleet Management System (EFM) is designed to give
More informationHardware installation guide
Getting Started Hardware installation guide Index Introduction Introduction...3 General Note... 3 Getting Help... 3 Deinstallation... 3 GPIB-PCMCIA (11.001.00)...4 Microsoft Windows 95/98... 4 Microsoft
More informationEPAS Desktop Pro Software User Manual
Software User Manual Issue 1.10 Contents 1 Introduction 4 1.1 What is EPAS Desktop Pro? 4 1.2 About This Manual 4 1.3 Typographical Conventions 5 1.4 Getting Technical Support 5 2 Getting Started 6 2.1
More informationMAF Fusion. Installation and operating instructions. MAF Fusion mass airflow sensor signal interface module & auxiliary injector controller
MAF Fusion Installation and operating instructions MAF Fusion mass airflow sensor signal interface module & auxiliary injector controller Part #: MF-001 Date: Revision: 1.0 26 June-2018 info@proservsolutions.com
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 13725 Second edition 2016-06-01 Hydraulic fluid power Method for evaluating the buckling load of a hydraulic cylinder Transmissions hydrauliques Méthode d évaluation du flambage
More informationME scope Application Note 24 Choosing Reference DOFs for a Modal Test
ME scope Application Note 24 Choosing Reference DOFs for a Modal Test The steps in this Application Note can be duplicated using any ME'scope Package that includes the VES-3600 Advanced Signal Processing
More informationTTI TRAFFIC SAFETY CONFERENCE. John A. Barton, P.E.
TTI TRAFFIC SAFETY CONFERENCE John A. Barton, P.E. Introduction TxDOT Mission Work with others to provide safe and reliable transportation solutions for Texas. 2 Mission Zero Is a Journey toward: Zero
More informationSubaru L Turbo
Subaru 02-05 2.0L Turbo Getting Started Product Introduction Congratulations on the purchase of the new AccessPORT handheld programmer. The AccessPORT can: Reprogram the factory engine control unit (ECU)
More informationAUTOMATED TORSION BENCH DRIVETWIST
Force and torque measurement systems AUTOMATED TORSION BENCH DRIVETWIST ANDILOG Technologies info@andilog.com Phone : +33 (0) 820 888 202 Fax : +33 (0) 820 888 902 Automated torsion bench DRIVETWIST Automated
More informationBulb flats For plate stiffening
Corus Special Profiles Bulb flats For plate stiffening Introduction Plate stiffening 2 Bulb flats Introduction Bulb flats are tailor made for plate stiffening applications. Their special shape provides
More informationFINAL REPORT CATHODIC PROTECTION EVALUATION. 42-Inch Water Transmission Pipeline Contract 1 Station 0+00 to South Texas Water Authority
FINAL REPORT CATHODIC PROTECTION EVALUATION 42-Inch Water Transmission Pipeline Contract 1 Station 0+00 to 50+00 South Texas Water Authority Prepared for: South Texas Water Authority P.O. Box 1701 Kingsville,
More information14801A Reprogram Engine Control Module
14801A Reprogram Engine Control Module 2011-2013 Chevrolet Cruze Equipped with 1.4L Engine (RPO LUJ and LUV) and Automatic Transmission The Service Procedure section of this bulletin has been revised.
More informationMnDOT s Experience with IRI Specifications
MnDOT s Experience with IRI Specifications Spring 2013 NCC Meeting April 4, 2013 Philadelphia, PA Maria Masten, P.E. MnDOT Concrete Engineer Evolution of Smoothness No Equipment Certification 2002 Profiler
More informationFDOT S CRITERIA FOR WIND ON PARTIALLY CONSTRUCTED BRIDGES
FDOT S CRITERIA FOR WIND ON PARTIALLY CONSTRUCTED BRIDGES DENNIS GOLABEK CHRISTINA FREEMAN BIOGRAPHY Mr. Golabek has recently joined Kisinger Campo & Associates and is the Chief Structures Engineer. He
More information