MAGNA FORCE HEAVY DUTY CAM CLAMPS Unique, patented range of cam clamps. Rugged build quality, ideal for machine shops
|
|
- Eugenia Caldwell
- 5 years ago
- Views:
Transcription
1 MAGNA FORCE HEAVY DUTY CAM CLAMPS Unique, patented range of cam clamps Rugged build quality, ideal for machine shops Clamping forces from 300 to 00 Significant cost benefits over strap clamps in repetitive machining A fraction of the cost of hydraulic workholding
2 CAM RAM CLAMPS MODELS CR4000 (CLOCKWISE) CR4000A (ANTI-CLOCKWISE) 6 FAST STROKE 2 CLAMPING STROKE R (hand applied), 4000 (mallet applied) 0.55 Kg M12 20 DEEP THEN 12.3 THROUGH 54 P.C.DIA. CAM RAM CLAMPS MODELS CR00 (CLOCKWISE) CR00A (ANTI-CLOCKWISE) 8 FAST STROKE 2.5 CLAMPING STROKE R (hand applied), 00 (mallet applied) 1.3 Kg M16 DEEP THEN 16.3 THROUGH 72 P.C.DIA. 120 CR4000A mm 2.0mm CR4000A mm 2.0mm CR00A mm 2.5mm CR00A mm 2.5mm 114
3 CAM SWING CLAMPS MODELS CS300 (CLOCKWISE) CS300A (ANTI-CLOCKWISE) IMPORTANT, TIGHTEN BOLT TO NM 111 For Cam Swing Height Block Assemblies see page 116 M FAST STROKE 1.5 MAX. CLAMPING STROKE (hand applied) Kg MB06 Set screw & nuts M8 1. CAM SWING CLAMPS 1 MODELS CS800 (CLOCKWISE) CS800A (ANTI-CLOCKWISE) M For Cam Swing Height Block Assemblies see page FAST STROKE 1.8 MAX. CLAMPING STROKE (hand applied), 800 (mallet applied) Kg CS300A N/A 1.5mm 1.5mm CS300A N/A 1.5mm 1.5mm CS800A mm 1.8mm CS800A mm 1.8mm 115
4 CAM SWING CLAMPS MODELS CS1200 (CLOCKWISE) CS1200A (ANTI-CLOCKWISE) 200 M For Cam Swing Height Block Assemblies see below 600 (hand applied), 1200 (mallet applied) Kg MB1055 Set screw & nuts FAST STROKE MAX. CLAMPING STROKE CAM SWING HEIGHT BLOCK ASSEMBLIES The height block assembly provides the user with a convenient method of setting the height of the Cam Swing Clamp when in operation. The act of locking the clamp onto the work piece also locks the block into position along the Tee Slot. Note: Clamp ordered separately To Suit Screw Clamp H W L TN P1 P2 P3 P4 T1 T2 4 CS300 10, 20, 30, 40, 30 12, 14, 16, 18 N/A N/A N/A 15 M8 1. M12 1. N/A CS800 12,, 40, , 14, 16, M6 1.0 M12 1. M6 18 CS , 40, 60, , 14, 16, M8 1. M12 1. M8 116
5 MODELS CP (mallet applied), 600 (hand applied) Kg MB063 Set screw & nuts. 77 M6 19 DEEP M FAST STROKE 2 MAX. CLAMPING STROKE MODELS CP (mallet applied), 6 (hand applied) Kg CMB24 Mounting base & locknuts M8 DEEP FAST STROKE 3 MAX. CLAMPING STROKE M CS1200A mm 2.0mm CS1200A mm 2.0mm CP10A mm 2.2mm CP2000A mm 3.0mm MODELS CP (mallet applied), 6 (hand applied). 1. Kg CMB33 Mounting base & locknuts M12 35 DEEP M FAST STROKE 4 MAX. CLAMPING STROKE
6 MODELS CP10L Kg CMB18 Mounting base & locknuts. 172 M6 19 DEEP M FAST STROKE 2 MAX. CLAMPING STROKE 9 MODELS CP2000L Kg CMB24 Mounting base & locknuts. Nominal holding force: M8 DEEP FAST STROKE 3 MAX. CLAMPING STROKE M CP3000L mm 4.0mm CP10L 10 N/A 5.2mm 2.2mm CP2000L N/A 7.0mm 3.0mm MODELS CP3000L Kg MB12 Set screw & nuts. CMB33 Mounting base & locknuts. Nominal holding force: M12 35 DEEP FAST STROKE 4 MAX. CLAMPING STROKE M CP3000L N/A 11.0mm 4.0mm 118
Recommended Installation Procedure (11 DEC 09) ATech Timing Belt Tensioner (979847/901) VW 1.6/2.0L L4 EA189 CR Engine
Initial Preparation: Caution: The procedure to access the timing belt tensioner and all other timing driven components must be done according to VW s guidelines. The mounting of the TBT is done on the
More informationTooling Automation Measurement CLAMPING PRODUCTS
Tooling Automation Measurement INTRODUCTION Since 1926, Brauer has been providing industry with the finest engineered products, expert technical support, on time deliveries and unparalleled customer service.
More informationRECOMMENDET INSTALLATION PROCEDURE Timing Belt Tensioner for Aftermarket OPEL 2.0L SOHC, Fam. 2 (Revision date: 04/27/1999)
1. Allow the engine and tensioner to stabilize to the same relative ambient temperature before installing a tensioner for proper belt tension adjustment. Do not attempt to install a cool tensioner onto
More informationZoom and Print Options
Vehicle» Engine, Cooling and Exhaust» Engine» Timing Components» Timing Chain» Service and Repair» Procedures» Timing Chain and Sprockets Replacement Timing Chain and Sprockets Replacement Tools Required
More informationRecommended Installation Procedure Timing Belt Tensioner (979597) 2.0L DOHC, RENAULT F4R Turbo, F4R L DOHC, RENAULT F4P720 (05/18/2004)
Caution: The procedure to access the timing belt tensioner and all other timing driven components must be done according to the car manufacturer s guidelines. Engine temperature: 1. The tensioner must
More informationXRAY Grippers - Extreme Force and Torque. Patented Synchronous Technology - Extended Life
XRAY XRAY Grippers - Extreme Force and Torque The XRAY concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These
More informationICU/CCU Room Door Solutions
ICU/CCU Room Door Solutions Designed to maximize both space & functionality In critical hospital environments, the demands for safe, efficient patient care require a versatile, feature-rich family of sliding
More informationRecommended Installation Procedure ATech Timing Belt Tensioner and AUDI 2.0L 4V FSI & TFSI Engine (19 January 2015)
The procedure to access the timing belt tensioner and all other timing driven components must be done according to the car manufacturer s guidelines. Engine temperature: 1. The tensioner must be installed
More informationCONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationDoor, Hatch & Interior Fittings
Sea Blue Security Locks NEW 10 Year Guarantee Sea Blue Security locks have been developed in the lock capital of England to withstand both corrosion and physical attack. Heavy steel full casings are used
More informationRotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing.
GMT Rotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing. The GMT Rotary Indexing Tables are fitted with
More informationSpecifications D3C, D4C AND D5C SERIES III TRACTORS POWER TRAIN. Steering Brake Group Pedal Steer (Standard)
Page 1 of 9 Specifications D3C, D4C AND D5C SERIES III TRACTORS POWER TRAIN Steering Brake Group Pedal Steer (Standard) Page 2 of 9 Torque for all 1/2 in. locknuts that hold rod ends in place on the rods...
More informationAssembly & Installa on Guide RB031-3: TRIPLE CROSSBAR KIT
PLEASE READ INSTRUCTIONS FULLY PRIOR TO INSTALLATION OF CROSSBAR KIT This instruction is to illustrate the recommended installation method for our Crossbar Kit, any deviation from this will be the sole
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationWORK WIZARD BALANCERS BALANCERS
WORK WIZARD WORK WIZARD BALANCERS BALANCERS 1 WORK WIZARD BALANCERS BALANCERS NEW PRODUCT! Kilogram Conversion: Multiply Kg x 2.2046 to = Lbs. TB12 Tool Balancer 1-2 LB Capacity 6.6 foot cable travel 2
More information/2017. Swing sink clamping element double-acting
Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group
More informationRoll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page
Roll Grooving Designed to improve speed and efficiency for fire sprinkler and other industrial installations. Wide selection of mechanical and hydraulic units for applications up to 24" in diameter. Type
More informationFast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More informationCONTENTS ONE YEAR LIMITED WARRANTY
CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR
More informationRecommended Installation Procedure (31 MARCH 2010) ATech Timing Belt Tensioner (979004) EA T 20 Valve Longitudinal Engine
Caution: The procedure to access the timing belt tensioner and all other timing driven components must be done according to the car manufacturer s guidelines. Engine temperature: 1. The tensioner must
More informationIntroduction... i-3 i-6 Manual Clamping Technology... Section Vertical Hold Down Clamps. 2 Horizontal Hold Down Clamps
Table of Contents i-2 Introduction.................................................. i-3 i-6 Manual Clamping Technology................................. Section 1 9 1 Vertical Hold Down Clamps 2 Horizontal
More informationSP Pumpkit Reference Guide
SP Pumpkit Reference Guide Keep it safe, keep it Schwing! www.schwingparts.com Phone: 888-SCHWING (7-96) Fax: 65-9- How to Order Parts To place an order for spare parts, you can order on line at schwingparts.com,
More informationGM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions
GM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions Set Includes: Locking Tool... 536594 Locking Tool... 536595 Crankshaft Holding Tool... 536596 Alignment Gauge... 536608 Belt Installation
More informationHart lock industrial grade 50A locking devices
Technical Data Hart lock industrial grade 50A locking devices 3-pole, 4-wire grounding 50A, 125/250V/AC, 3Ø, 250V/AC Non-NEMA, California standard X W G G W X Receptacle Plug CS6365EX Design features for
More informationActuator Capabilities
Actuator Capabilities The Compact Difference... Compact Automation Products brand, is a market-leading manufacturer of space-efficient linear actuator solutions including, industry standard and custom
More informationSpring Contact Probe CP6 - CP20B
Spring Contact Probe CP6 - CP0B CP6 - CP0B (Spring contact probe) more than million strokes (mm stroke, 60 strokes / 60 seconds) Thermal-endurance : 00ºC or below Fig Fig Fig CP6 - CP0B CP6 CP8 CP0
More informationUNIVERSAL PRODUCTION EDGE BELT SANDERS
UNIVERSAL PRODUCTION EDGE BELT SANDERS Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing
More information/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping
, single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping
More informationCONTROL PANEL - SCHWING
MACHINE OPERATION CONTROL PANEL - SCHWING Hydraulic oil temperature gauge Agitator rotation - clockwise Agitator rotation - anti clockwise Low fuel indication AMBER Reverse Pumping Hopper vibrator Pumping
More informationType 2 Push-Through 37 Ton Log Splitter. Assembly Manual
Type 2 Push-Through 37 Ton Log Splitter Assembly Manual Refer to this manual for the following models: RS37PT-LF09PC-16-1 RS37PT-LF09EC-16-1 RS37PT-LF09EC-16-2 RS37PT-LF13EC-22-1 RS37PT-LF13EC-22-2 RS37PT-LF15EC-22-1
More information502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:
Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,
More informationMB-825 Flange Mounted
Motor Brake Normal Duty MB-825 Flange Mounted 1/4-20 UNC-3B (4) on 10.50 dia. 5/16-18 UNC-3B (8) holes equally spaced on 8.85 dia.* 2.68 4.359 1/2-13 UNC-2A (4) on.250 dia.* 10.50 10.50 10.000.156.062
More informationNo-Hub Couplings Drainage Drains Cleanout Plugs Cover Plates
Flexible Couplings Transitions all types of DWV plastic, copper, steel, cast iron and clay pipe. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic rubber
More informationbrochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
More informationSurface Mounted 4C Horizontal Mailboxes
Surface Mounted 4C Horizontal Mailboxes Note: Salsbury 3800 series surface mounted 4C horizontal mailboxes include a U.S.P.S. approved 4C horizontal mailbox unit and a matching enclosure. 4C mailboxes
More informationBatteries Specifications. Estimating when they will be fully discharged
Batteries Specifications Estimating when they will be fully discharged Batteries Batteries are electrochemical cells. A chemical reaction inside the battery produces a voltage between two terminals. Connecting
More informationIntroduction Parker Series spring return (AC/AO) or double acting (AD) rack and pinion actuators are compact, simply designed devices that are quality
Pneumatic Actuators Catalog 4123-PA Revised, April 22 Introduction Parker Series spring return (AC/AO) or double acting (AD) rack and pinion actuators are compact, simply designed devices that are quality
More informationSCHMIDT HydroPneumaticPress
SCHMIDT HydroPneumaticPress C-rame design eatures The C-rame design offers full accessibility when manually inserting and removing parts Easy adaptation to different tool and part heights because of simplistic
More informationINSTALLATION INSTRUCTIONS. Put this information in the glove box with the vehicle owner's manual. INSTALLATION PARTS LIST
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 40377 ATTACHMENT 2009 CR-V P/N 08L03-SCV-100 Issue Date AUG 2008 Put this information in the glove box with the vehicle owner's manual.
More informationEngine Valve Lash - Inspect/Adjust
Page 1 of 5 Shutdown SIS Previous Screen Product: TRUCK ENGINE Model: 3126E TRUCK ENGINE CKM Configuration: 3126E Truck Engine CKM00001-UP Testing and Adjusting 3126B and 3126E Truck Engine Media Number
More informationThe Family Of... PO Box 200 Mauldin, SC Phone: Fax: compx.com
The Family Of... PO Box 200 Mauldin, SC 29662 Phone: 864-297-6655 Fax: 864-297-9987 Email: info@compx.com compx.com 3000 North River Road River Grove, IL 60171 Phone: 708-456-1100 Fax: 708-456-9476 Email:
More informationBRAKE INFORMATION FOR FKH AXLES
BRAKE INFORMATION FOR FKH AXLES S-CAM ROTATION ON DRUM BRAKE AXLES It is our recommendation (it is also a general industry recommendation) to install Drum Brake Axles so that the S-Cams rotate in the same
More informationTourmaster Side Rails
Assembly Instructions Tourmaster Side Rails 3-Step Model shown with optional Side and Back Rails CONTENTS Visit the Tourmaster Choral Risers web page at www.wengercorp.com for detailed instructions and
More informationMCGUIRE AIR COMPRESSORS INC HP RECIPROCATING BARE PUMPS. A-Series MCGUIRE AIR COMPRESSORS INC
7.5 40 HP RECIPROCATING BARE PUMPS A-Series CHAMPION A-SERIES Rugged Durability Premium Performance A Winning Combination Champion compressors are proven units, known for their reliability over decades
More informationCorrosion Resistant Pneumatic Positioners Model 4700P and 4700E
Corrosion Resistant Pneumatic Positioners Specification Data CS2007 4/98 Table of Contents Foreword............................................................. 2 Numbering System.....................................................
More informationLEDEEN CP Series. Compact actuators
LEDEEN CP Series Compact actuators LEDEEN CP Series Compact Actuators Customer-focused solutions Save valuable space as compared with a typical scotch yoke actuator Set the valve position precisely with
More informationRotary Cam Switches. Rotary Cam Switches
es Series es... 2 Assemblies... 11 s... 15 Accessories... 25 Technical Information... 26 Dimensions... 31 Series R-Line es... 34 s... 39 Accessories... 40 Technical Information... 41 Dimensions... 42 es
More informationArmoured Cable/Flex. Conduit
Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16
More informationVane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
More information- 1/7 - Copyright Litens Automotive Group All rights reserved.
Caution: The procedure to access the timing belt tensioner and all other timing driven components must be done according to the car manufacturer s guidelines. Engine temperature: 1. The tensioner must
More informationCOLD SAWS. Manual Semi-Automatic Automatic
COLD SAWS Automatic Metal Cutting COLD SAWS The Baileigh brand stands for excellent quality and support at a competitive price. That thinking was carried over to all of our cold saws and are built to the
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application 2011 CR-Z Publications No. AII 43553 Issue Date AUG 2010 PARTS LIST Attachment Kit P/N 08V03-SZT-100 Automatic day/night mirror harness Automatic Day/Night
More informationPinch-On Single Ear Clamps
band width:.275" band thickness:.030" sold in package quantities only Nominal Size Clamps Pinch-On Single Ear Clamps Range Zinc Plated Steel 304 Stainless Steel Pkg Qty closed open Price/E Price/E 3/8".350.413
More informationCatalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in. (762 x 762 mm)
SPEC-00186 CONCEPT Accessories CONCEPT Accessories CONCEPT PANEL CONVERSION KIT Conversion Kit adapts enclosure for mounting standard NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar
More informationAirflex Spring Applied Brakes
Airflex Spring Applied Brakes CS and CSA Brake Elements... 232 Technical and Dimensional Data... 233 Applications... 235 Component Parts... 237 CTE Brake Elements... 239 Technical and Dimensional Data...
More informationATech Timing Belt Tensioner (979572) VM MOTORI 2.5L Diesel, Common Rail Engine
Caution: The procedure to access the timing belt tensioner and all other timing driven components must be done according to the car manufacturer s guidelines. Engine temperature: 1. The tensioner must
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application 2015 CR-Z Publications No. VERSION 1 Issue Date SEP 2014 PARTS LIST Attachment Kit P/N 08V03-SZT-100A Automatic Day/Night Mirror Kit P/N 08V03-TA0-100A Automatic
More informationMX Series. MX Disc Brake Caliper Range. Disc Brake Caliper SMX. Disc Brake Caliper
MX Disc Brake Caliper Range The Twiflex MX13, MX25, MX30 and MX40 series of disc brake calipers are suitable for use with discs of 12.7mm, 25.4mm, 30mm and 40mm thick respectively. The SMX caliper is only
More informationVALVE WITH UV ELECTRIC ACTUATOR
762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full
More informationThe Coats X-Series The Power of Choice
The Coats X-Series The Power of Choice Coats has been the leader in tire service equipment for over 50 years. And the Coats Rim Clamp tire changer has become the industry standard due to its legacy of
More informationREMOVAL AND INSTALLATION
2006 Eclipse (2.4L 4G69) REMOVAL AND INSTALLATION Report a problem with this article Pre-removal Operation Side Under Cover Removal (Refer to GROUP 51, Under Cover Post-installation Operation Crankshaft
More informationThe Coats X-Series. Now with Even More Power of Choice.
The Coats X-Series. Now with Even More Power of Choice. Coats has been the leader in tire service equipment for more than 60 years. And the Coats Rim Clamp tire changer has become the industry standard
More informationSILENTIA HINGES 35 mm SOFT-CLOSING he ONLY hinge to use with integrated soft-close # QUINKO-TEK
1 B 02 SALICE SILENTIA HINGES 35 mm SOFTCLOSING he ONLY hinge to use with integrated softclose Screwin Knockin SelfClosing # QUINKOTEK # SALICE DESCRIPTION 370ASM 372ASM 370ASM/16 372ASM/16 C7R6AD9 C7P6AD9
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationR to disc edge. Caliper Part Number Caliper Part Number for K and L Thrusters. Pad wear allowance
MS Disc Brake Caliper DS1500 TWIFLEX MS 6.4 20.5 to disc edge 137 R22 2 Holes14 dia M12-87Nm) 12.7 1 76 135 2 121 Caliper Part Number. 6780277 Caliper Part Number. 6780842 for K and L Thrusters Weight
More informationTanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS)
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS) Tanker 400 XP Series Nitrogen Gas Springs IDEAL NITROGEN GAS SPRINGS FOR HIGH
More informationMax. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (
These valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycles machine tools. Switching from rapid traverse
More informationkysmall, Yet Flexible
. kysmall, Yet Flexible ky Application Alfa Laval s Tri-Clover brand range of fractional valves has been designed for applications requiring a secure, sanitary or sterile environment within the food, beverage,
More informationPOWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
More informationATech Timing Belt Tensioner (979756) PSA EW10A 2.0L Engine
Caution: The procedure to access the timing belt tensioner and all other timing driven components must be done according to the car manufacturer s guidelines. Engine temperature: 1. The tensioner must
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL HYDRAULIC AND PNEUMATIC MOTORS. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL HYDRAULIC AND PNEUMATIC MOTORS This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed
More informationPOWER CLAMPING.
www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44
More informationPNEUMATIC TOGGLE PRESSES
ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely
More informationDatasheet AC Outlet DIN-Rail Mountable Receptacles
Datasheet AC Outlet DIN-Rail Mountable Receptacles DIN-rail receptacles, 5A, 15A and 20A power outlets, provide a convenient power source for portable computers or test devices for in-the-panel troubleshooting.
More informationWORK INSTRUCTION READ FIRST. IF IN DOUBT
WORK INSTRUCTION PAGE 1 OF 9 FIELD CHANGE INSTRUCTION : TO CHANGE A BACK DOOR AND SIDE LIFT PROCEDURE: Step 1. How to remove and replace the rear door of a canopy. Step 2. How to remove the side lift up
More informationPneumatic/Electric Actuators. Catalog 4123 August 2004
Pneumatic/Electric Actuators Catalog 4123 August 2004 Pneumatic Actuators Introduction Parker 60 Series spring return (AC/AO) or double acting (AD) rack and pinion actuators are compact, simply designed
More informationVIKING SPUR GEAR SINGLE PUMPS SERIES SG-04, SG-05, SG-07 AND SGN-05, SGN-07 STANDARD CONSTRUCTION FEATURES
VIKING SPUR GEAR SINGLE PUMPS FEATURES Section 34 Page 34. SERIES SG-04 and SG-05 Pumps Cutaway View.0 to.2 GPM Sizes (.0 to 2.5 m³/hr) SERIES SG-07 Pump Cutaway View 2.8 to 32.0 GPM Sizes (. to 7 m³/hr)
More informationPower Conversion. Battery Chargers. Model
Power Conversion www.curtisinstruments.com 1 The Curtis high frequency battery chargers are portable and allow easy charging of industrial vehicle batteries from 24 VDC to 48 VDC using any standard outlet
More informationMicro24 TM Hose & Tube System
Micro24 TM Hose & Tube System THE COMPACT HOSE & TUBE SYSTEM IDEAL FOR HOSING APPLICATIONS IN SMALLER AND PROGRESSIVE DIES WHERE SPACE IS LIMITED. METAL FORMING SOLUTIONS TM Micro24 System The Compact
More informationTOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
More informationDL1800A, DL2000A, DL2500A & DL3200A PULLING WINCHES. U.S. Patent Canadian Patent DL2500A
DL1800A, DL2000A, DL2500A & DL3200A PULLING WINCHES U.S. Patent 6116580 Canadian Patent 2378538 DL2500A Original Instructions ENGLISH WARNING READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE
More informationSCHMIDT PneumaticPress
PneumaticPress Direct Acting Pneumatic Presses with Force / Stroke Monitoring PneumaticPresses with force / stroke monitoring are offered as complete system with control unit Press- Control 600. These
More informationG1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
More informationBV Series. Threaded Industrial Control Ball Valves 2 Way 1/2-4. Increased Linear Response. Flow Curve Chart
The BV Series Threaded Industrial Ball Valve product line is ideally suited to high temperature and high pressure water or steam as well as a wide range of heavy commercial HVAC control applications. These
More informationMorin series S actuator
MORIN Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits Innovative stainless steel construction as standard provides superior
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationMP-5200 Series. Application. Features. Applicable Literature. Electronic Hydraulic Actuator General Instructions
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com MP-5200 Series Electronic Hydraulic Actuator General Instructions Application The MP-5200 Series actuators are for the electronic
More informationSpicer Axles & Brakes
Spicer Axles & Brakes Wheel Differential Bearing Adjustment Tool Kit Instructions P/N: SHAIS150 Shown below is a complete set of instructions on how to properly utilize Dana s Wheel Differential Bearing
More informationSUMMARY. Contents. Chapter
SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4 Selecting the gear unit...5 1.5 Service life of bearings...6
More informationPowered Rota-Shaft Clamps with Cylinders
Powered Rota-Shaft Clamps with Cylinders A standard clamping package providing up to 165 right- or left-hand rotation, linear/rotary sequence. Independent ¾ or 1 1/8 dia. shafts are powered by 1 1/2",
More informationSAMSON special tools. Fig. 1 Seat wrenches and supporting flanges WA 029 EN
SAMSON special tools Fig. 1 Seat wrenches and supporting flanges WA 029 EN Edition November 2000 General information 1. General information Special seat tools are required to install or remove the seats
More informationPowered Locking Rota-Shaft (LRS) with Cylinders
Locking (LRS) with s ROTATIN CLAMP HAS POSITIVE LOCK E&E Engineering has an innovative, patented machine tool component called the E&E Locking (LRS). The new LRS linear/rotary clamp features a positive
More informationBetaflex flexible conduit solutions
Protect Betaflex flexible conduit solutions The highly regarded Betaflex range includes polypropylene, halogen-free, rail approved and galvanised steel conduit. A matched range of accessories and tooling
More informationTyre Changers. Series T1300, T5300, T5320, T5340, T5540, T7300. The innovative tyre changer range ideal for the workshop and tyre service
Tyre Changers Series T1300, T5300, T5320, T5340, T5540, T7300 The innovative tyre changer range ideal for the workshop and tyre service PROspeed The innovative technology patent protected that optimises
More informationHeavy Duty Miniature Quick-Change Applicator (Side-Feed Type) with Mechanical or Air Feed Systems
Heavy Duty Miniature Quick-Change Applicator (Side-Feed Type) with Mechanical or Air Feed Systems Instruction Sheet 408-8040 30 NOV 17 Rev H Ram Assembly Ram Post Locking Screw Stock Drag Drag Release
More informationCLC - CIRCULATING LEVEL CONTROL SYSTEMS:
Engines and transmissions need less servicing and run longer before rebuild. RESERVE SYSTEMS The oil level is the magic! CLC - CIRCULATING LEVEL CONTROL SYSTEMS: Controls oil levels in all stationary and
More informationSeries Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
More informationThe Coats X-Series The Power of Choice
The Coats X-Series The Power of Choice Coats has been the leader in tire service equipment for over 50 years. And the Coats Rim Clamp tire changer has become the industry standard due to its legacy of
More information