Cree XLamp XT-E High-Voltage White LEDs

Transcription

1 Product family data sheet Cree XLamp XT-E High-Voltage White LEDs CLD-DS43 REV 11 Product Description The Cree XLamp XT-E High Voltage White (HVW) LED provides the lighting class performance and reliability of Cree XLamp LEDs in a small form, high voltage configuration. The XT-E HVW LED is an order of magnitude smaller than other high voltage LED arrays, allowing easy implementation of space constrained lighting applications with smaller, more efficient high voltage drivers. Among these applications are small lamps such as B10, GU10 and E17. FEATURES Binned at 85 C Available in 12 V, 24 V and 48 V configurations Cree-standard mechanical footprint of 3.45 X 3.45 mm with electrically neutral thermal path Unlimited floor life at 30 ºC/85% RH Reflow solderable Available in standard CRI and 80 minimum CRI configurations RoHS and REACh compliant UL recognized component (E349212) Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. Cree, Inc Silicon Drive Durham, NC USA Tel:

2 Table of Contents Table of Contents... 2 Characteristics... 3 Characteristics - 12 V... 4 Characteristics - 24 V... 4 Characteristics - 48 V... 5 Relative Spectral Power Distribution Relative vs. Junction Temperature Electrical Characteristics Relative vs. Current Typical Spatial Distribution Thermal Design Performance Groups Luminous Performance Groups Forward Voltage Performance Groups Chromaticity Cree s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Cree s 2450 K & 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Standard Chromaticity Kits Bin and Order Code Formats Reflow Soldering Characteristics Mechanical Dimensions Tape and Reel Packaging

3 Characteristics Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point (12 V, 24 V) C/W 5 Thermal resistance, junction to solder point (48 V) C/W 6.5 Viewing angle (FWHM, 12 V) degrees 130 Viewing angle (FWHM, 24 V, 48 V) degrees 115 Temperature coefficient of voltage (12 V) mv/ C -8.5 Temperature coefficient of voltage (24 V) mv/ C -17 Temperature coefficient of voltage (48 V) mv/ C -37 ESD withstand voltage (HBM per Mil-Std-883D) (12 V) V 8000 ESD Classification (HBM per Mil-Std-883D) (24 V, 48 V) Class 2 DC forward current (12 V) ma 375 DC forward current (24 V) ma 125 DC forward current (48 V) ma 66 Reverse current ma -0.1 Forward voltage (12 88 ma, 85 C) V Forward voltage (24 44 ma, 85 C) V Forward voltage (48 22 ma, 85 C) V LED junction temperature C 150 3

4 Characteristics - 12 V (88 ma, T J = 85 C) The following table provides order codes for 12-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 31). Chromaticity Minimum Luminous 88 ma Order Codes Kit CCT Code E7 F8 E K 2850 K 2700 K 85 C 25 C* 82 CRI Typical 80 CRI Minimum Q XTEHVW-D LDE7 XTEHVW-D HDE7 Q XTEHVW-D LCE7 XTEHVW-D HCE7 Q XTEHVW-D LBE7 XTEHVW-D HBE7 Q XTEHVW-D LCF8 XTEHVW-D HCF8 Q XTEHVW-D LBF8 XTEHVW-D HBF8 Q XTEHVW-D LAF8 XTEHVW-D HAF8 Q XTEHVW-D LCE8 XTEHVW-D HCE8 Q XTEHVW-D LBE8 XTEHVW-D HBE8 Q XTEHVW-D LAE8 XTEHVW-D HAE8 Characteristics - 24 V (44 ma, T J = 85 C) The following tables provide order codes for 24-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 31). Chromaticity Minimum Luminous 44 ma Order Codes Kit CCT Code 85 C 25 C* 75 CRI Typical 82 CRI Typical 80 CRI Minimum E3 F4 E K 4750 K 3000 K R XTEHVW-H LEE3 XTEHVW-H HEE3 Q XTEHVW-H LDE3 XTEHVW-H HDE3 Q XTEHVW-H LCE3 XTEHVW-H HCE3 R XTEHVW-H LEF4 XTEHVW-H HEF4 Q XTEHVW-H LDF4 XTEHVW-H HDF4 Q XTEHVW-H LCF4 XTEHVW-H HCF4 Q XTEHVW-H LCE7 XTEHVW-H HCE7 Q XTEHVW-H LBE7 XTEHVW-H HBE7 Q XTEHVW-H LAE7 XTEHVW-H HAE7 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 4

5 Characteristics - 24 V (44 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous 44 ma Order Codes Kit CCT Code F8 E K 2700 K 85 C 25 C* 75 CRI Typical 82 CRI Typical 80 CRI Minimum Q XTEHVW-H LBF8 XTEHVW-H HBF8 Q XTEHVW-H LAF8 XTEHVW-H HAF8 P XTEHVW-H L9F8 XTEHVW-H H9F8 Q XTEHVW-H LBE8 XTEHVW-H HBE8 Q XTEHVW-H LAE8 XTEHVW-H HAE8 P XTEHVW-H L9E8 XTEHVW-H H9E8 Characteristics - 48 V (22 ma, T J = 85 C) The following tables provide order codes for 48-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 31). Chromaticity Minimum Luminous 22 ma Order Codes Kit CCT Code K 85 C 25 C* R R R R Q Q No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LH LG LF LE LD LC51 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 5

6 Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous 22 ma Order Codes Kit CCT Code K K E K 85 C 25 C* R R R R Q Q R R R R Q Q R R R R Q Q No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LH LG LF LE LD LC LH LG LF LE LD LC LHE LGE LFE LEE LDE LCE1 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 6

7 Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous 22 ma Order Codes Kit CCT Code E2 E3 F K 5000 K 4750 K 85 C 25 C* R R R R Q Q R R Q Q Q R R R Q Q Q No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LHE LGE LFE LEE LDE LCE LFE LEE LDE LCE LBE LGF LFF LEF LDF LCF LBF4 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 7

8 Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous 22 ma Order Codes Kit CCT Code E4 F5 E K 4250 K 4000 K 85 C 25 C* R R R Q Q Q R Q Q Q Q P R Q Q Q Q P No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LGE LFE LEE LDE LCE LBE LEF LDF LCF LBF LAF L9F LEE LDE LCE LBE LAE L9E HDF HCF HBF HAF H9F HDE HCE HBE HAE H9E5 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 8

9 Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous 22 ma Order Codes Kit CCT Code F6 E6 F K 3500 K 3250 K 85 C 25 C* R Q Q Q Q P P R Q Q Q Q P P Q Q Q Q P P No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LEF LDF LCF LBF LAF L9F L8F LEE LDE LCE LBE LAE L9E L8E LDF LCF LBF LAF L9F L8F HDF HCF HBF HAF H9F H8F HDE HCE HBE HAE H9E H8E HDF HCF HBF HAF H9F H8F7 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 9

10 Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous 22 ma Order Codes Kit CCT Code E7 F8 E K 2850 K 2700 K 85 C 25 C* Q Q Q Q P P Q Q Q P P P Q Q Q P P P No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LDE LCE LBE LAE L9E L8E LCF LBF LAF L9F L8F L7F LCE LBE LAE L9E L8E L7E HDE HCE HBE HAE H9E H8E HCF HBF HAF H9F H8F H7F HCE HBE HAE H9E H8E H7E8 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 10

11 Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous 22 ma Order Codes Kit CCT Code F9 FA EA 2700 K 2450 K 2200 K 85 C 25 C* Q Q P P P P N P N N No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LBF LAF L9F HAF H9F H8F H8FA 00000H7FA 00000H6FA 00000H7EA 00000H6EA 00000H5EA Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 33). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * values at 25 C are calculated and for reference only. 11

12 Relative Spectral Power Distribution (12 V, 88 ma; 24 V, 44 ma; T J = 85 C) 100 Relative Radiant Power (%) K K CCT Wavelength (nm) Relative Spectral Power Distribution (48 V, 22 ma; T J = 85 C) 100 Relative Radiant Power (%) K K CCT 2600K K CCT Wavelength (nm) 12

13 Relative vs. Junction Temperature (12 V, 88 ma; 24 V, 44 ma; 48 V, 22 ma) 120% Relative Luminous 100% 80% 60% 40% 20% 0% Junction Temperature (ºC) Electrical Characteristics (T J = 85 C) 375 Forward Current (ma) V XT-E HVW Forward Voltage (V) 13

14 Electrical Characteristics (T J = 85 C) - Continued 125 Forward Current (ma) V XT-E HVW Forward Voltage (V) 66 Forward Current (ma) V XT-E HVW Forward Voltage (V) 14

15 Relative vs. Current (T J = 85 C) 350% Relative Luminous (%) 300% 250% 200% 150% 100% 50% 0% Forward Current (ma) 12-V XT-E HVW 250% Relative Luminous (%) 200% 150% 100% 50% 0% Forward Current (ma) 24 V XT-E HVW 15

16 Relative vs. Current (T J = 85 C) - Continued 250% Relative Luminous (%) 200% 150% 100% 50% 48-V XT-E HVW 0% Forward Current (ma) Typical Spatial Distribution (12-V XT-E HVW) 100 Relative Luminous Intensity (%) Angle (º) 16

17 Typical Spatial Distribution (24-V & 48-V XT-E HVW) 100 Relative Luminous Intensity (%) Angle (º) Thermal Design Maximum Current (ma) Rj-a = 10 C/W Rj-a = 15 C/W Rj-a = 20 C/W Rj-a = 25 C/W 12-V XT-E HVW Ambient Temperature (ºC) 17

18 Thermal Design - Continued Maximum Current (ma) Rj-a = 10 C/W Rj-a = 15 C/W Rj-a = 20 C/W Rj-a = 25 C/W 24-V XT-E HVW Ambient Temperature (ºC) Maximum Current (ma) Rj-a = 10 C/W Rj-a = 15 C/W Rj-a = 20 C/W Rj-a = 25 C/W 48-V XT-E HVW Ambient Temperature (ºC) 18

19 Performance Groups Luminous (T J = 85 C) XLamp XT-E High Voltage White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Min. Luminous Max. Luminous N N P P P Q Q Q Q R R R R S Performance Groups Forward Voltage (T J = 85 C) 48 V XLamp XT-E High Voltage White LEDs are tested for forward voltage at 22 ma and placed into one the following voltage bins. Group Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) 0 No Vf Bin

20 Performance Groups Chromaticity Region x y Region x y Region x y Region x y A B 0C 0D R S 0T 0U A B 1C 1D R S 1T 1U A B 2C 2D R S 2T 2U A B 3C 3D R S 3T 3U A B 4C 4D R S 4T 4U

21 Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y A B 5C 5D A A2 5A3 5A B B2 5B3 5B C C2 5C3 5C D D2 5D3 5D R S 5T 5U A B 6C 6D A A2 6A3 6A B B2 6B3 6B C C2 6C3 6C

22 Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y D D2 6D3 6D R S 6T 6U A B 7C 7D A A2 7A3 7A B B2 7B3 7B C C2 7C3 7C D D2 7D3 7D A B 8C 8D A A2 8A3 8A B B2 8B3 8B

23 Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y C C2 8C3 8C D D2 8D3 8D A A2 9A3 9A B B2 9B3 9B C C2 9C3 9C D D2 9D3 9D AA AA2 AA3 AA AB AB2 AB3 AB AC AC2 AC3 AC AD AD2 AD3 AD

24 Cree s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve ANSI Cool White 5000K 5700K 6500K 2S 2T 3S 3B CCy 8000K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3A 3R S 0B 0A 0C 0D 0R 0U 1A 1R 1U 2R ANSI C78.377A CCx ANSI Neutral White and ANSI Warm White - 48-V XT-E HVW K 2700K CCy 3B 3A 5000K 3D 3C 4A 4B 4D 4500K 4C 5A1 5A2 5B1 5B2 5A4 5A3 5B4 5B3 5D1 5D2 5C1 4000K 5C2 5D4 5D3 5C4 6A1 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6D1 6B3 6D2 6C1 6D4 3500K 6C2 6D3 6C4 7A1 6C3 7A2 7A4 7B1 7A3 7B2 7D1 7B4 7D2 7B3 7D4 7C1 7D3 8A1 7C2 7C4 8A2 8A4 7C3 8B1 8A3 8D1 8B2 8B4 8D2 8D4 8B3 8C1 8D3 8C2 8C4 ANSI C78.377A 8C

25 Cree s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve - Continued ANSI Neutral White and ANSI Warm White - 12-V & 24-V XT-E HVW K 3000K CCy 5700K 5000K 4500K 4C 5B 4000K 5D 5C 6A 6B 3500K 6D 6C 7A 7B 7D 7C 8A 8B 8D 8C 3B 3A 3C 3D 4B 4A 4D 5A ANSI C78.377A CCx 25

26 Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 5000K 5000K 6500K K 2S 2T 3S 3B 6500K K 2S 2T 3S 3B CCy 8000K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3A 3R CCy 8000K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3A 3R S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A CCx CCx 5000K 5000K 5700K 5700K CCy K 6500K 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 50 2S 2B 2A 2R 2T 2C 2D 2U 3S 3B 3A 3R ANSI C78.377A CCy K 6500K E1 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 2S 2B 2A 2R 2T 2C 2D 2U ANSI C78.377A CCx CCx 5000K 6500K 5700K E2 2S 2T 1T 2C CCy 8000K 0T 1S 1B 1C 1D 2B 2A 2D 2U S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A CCx 26

27 Cree s Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions 3500K 3500K CCy 3S 3B 3A 3R 5000K 3U 3D 3C 3T 4R C1 4A 4B 4S 4U 4D 4500K 4C 4T 5A1 5R 5A2 5B1 5B2 5A4 5A3 5B4 5S 5B3 5D1 5U 5D2 5C1 4000K 5C2 5D4 ANSI C78.377A 5D3 5C4 6A1 6R 5T 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6U 6D1 6S 6B3 6D2 6C1 6D4 6C2 6D3 6C4 6C3 6T CCy 3S 3B 3A 3R 5000K 3U 3D 3C 3T 4R D1 4A 4B 4S 4U 4D 4500K 4C 4T 5A1 5R 5A2 5B1 5B2 5A4 5A3 5B4 5S 5B3 5D1 5U 5D2 5C1 4000K 5C2 5D4 ANSI C78.377A 5D3 5C4 6A1 6R 5T 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6U 6D1 6S 6B3 6D2 6C1 6D4 6C2 6D3 6C4 6C3 6T CCx CCx 3500K 3500K CCy 3S 3B 3A 3R 5000K 3U 3D 3C 3T 4R 4000K 6S 4500K 5T 6C3 6C2 6B3 C2 5S 6C4 5C3 6B2 6C1 5C2 6B4 4T 6D3 5B3 5C4 6B1 6D2 4S 5B2 5C1 6A3 5B4 5D3 6A2 6D4 6D1 4C 5B1 5D2 6A4 5A3 5D4 6A1 4B 5A2 5D1 6U 5A4 4D 5A1 6R 5U 4A 5R 4U ANSI C78.377A 6T CCy 3S 3B 3A 3R 5000K 3U 3D 3C 3T 4R 4A D2 4B 4S 4U 4D 4500K 4C 4T 5A1 5R 5A2 5B1 5B2 5A4 5A3 5B4 5S 5B3 5D1 5U 5D2 5C1 4000K 5C2 5D4 ANSI C78.377A 5D3 5C4 6A1 6R 5T 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6U 6D1 6S 6B3 6D2 6C1 6D4 6C2 6D3 6C4 6C3 6T CCx CCy 3S 3B 3A 3R 5000K 3U 3D 3C 3T 4R 4A 4B 4S 4U 4D 4500K 4C 4T 5A1 5R 5A2 C3 5B1 5B2 5A4 5A3 5B4 5S 5B3 5D1 5U 5D2 5C1 4000K 5C2 5D4 ANSI C78.377A 5D3 5C4 6A1 6R 5T 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6U 6D1 6S 6B3 6D2 6C1 6D4 3500K 6C2 6D3 6C4 6C3 6T 0.32 CCx 27

28 Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 CCy 0.45 E3 5000K 3C 3B 3D 3A 4A 3000K E8 3500K E7 8C2 8B3 8B2 7C3 4000K 4500K E6 7C2 8C4 7B3 8C1 7B2 8B4 8B1 6C3 7C4 7C1 6C2 7B4 8D2 8D3 E5 7B1 8A3 6B3 8A2 6C4 7D3 6B2 7D2 5C3 6C1 7A3 8D4 8D1 7A2 8A4 5C2 6B4 8A1 6D3 7D4 5B3 6B1 5C4 7D1 E4 6D2 7A4 5B2 5C1 6A3 7A1 6D4 5B4 5D3 6A2 6D1 5B1 5D2 6A4 4C 5A3 5D4 6A1 4B 5A2 5D1 5A4 5A1 4D ANSI C78.377A 8C3 2700K CCx K CCy 3B 5000K F4 4B 3C 4A 3000K F8 3500K F7 8B3 8B2 7C3 4000K 7C2 7B3 8C1 7B2 8B4 8B1 4500K 6C3 7C4 7C1 6C2 7B4 8D2 8D3 7B1 8A3 6B3 8A2 6C4 7D3 F5 6B2 7D2 5C3 6C1 7A3 8D4 8D1 7A2 8A4 5C2 6B4 8A1 6D3 7D4 5B3 6B1 5C4 7D1 6D2 7A4 5B2 5C1 6A3 7A1 6D4 5B4 5D3 6A2 6D1 5B1 5D2 6A4 4C 5A3 5D4 6A1 5A2 5D1 5A4 5A1 4D F6 8C2 8C4 8C3 3D 3A ANSI C78.377A CCx 28

29 Cree s 2450 K & 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions K F9 3000K 9B2 9B3 8C2 8C3 3500K 9B1 9B4 8C4 8C1 4000K 9A2 9A3 8D2 8D3 9A1 9A4 8D4 8D CCy CCx CCy K 2700K 9B1 9A2 9A3 9B2 9B4 9D2 FA 2450K 9B3 9C2 9C3 9C1 9C4 9D3 2200K CCy K 8B3 8B2 7C3 7C2 8C1 8B4 8B1 7C4 8D3 8D2 8A3 8A2 7D3 8D4 8D1 8A4 8A1 2700K 8C3 8C2 8C4 AA1 2450K AB1 AA2 AA3 AA4 AD1 AB2 AB4 AD2 AD4 EA 2200K AB3 AC2 AC3 AC1 AC4 AD3 9A1 9A4 9D1 9D CCx CCx 29

30 Cree s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits for 12-V XT-E HVW LEDs. Color CCT Kit Chromaticity Bins Warm White 3000 K E7 7A, 7B, 7C, 7D 2850 K F8 7C, 7D, 8A, 8B 2700 K E8 8A, 8B, 8C, 8D The following table provides the chromaticity bins associated with chromaticity kits for 24-V XT-E HVW LEDs. Color CCT Kit Chromaticity Bins Neutral White Warm White 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 3000 K E7 7A, 7B, 7C, 7D 2850 K F8 7C, 7D, 8A, 8B 2700 K E8 8A, 8B, 8C, 8D The following table provides the chromaticity bins associated with chromaticity kits for 48-V XT-E HVW LEDs. Color CCT Kit Chromaticity Bins Cool White Neutral White Warm White 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4500 K C2 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D K F9 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D, 9A1, 9A2, 9A3, 9A4, 9B1, 9B2, 9B3, 9B K FA 9A1, 9A2, 9A3, 9A4, 9B1, 9B2, 9B3, 9B4, 9C1, 9C2, 9C3, 9C4, 9D1, 9D2, 9D3, 9D K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4 30

31 Bin and Order Code Formats Bin codes and order codes for XT-E High Voltage White LEDs are configured as follows: Order Code Bin Code Series XTE = XT-E Series XTE = XT-E SSSCCC-BD-HHHH-NNNNNVFGG Configuration B: Voltage class D: Reel size Color Specification L: Standard CRI H: 80 CRI Minimum Chromaticity Internal code Color HVW = High Voltage White SSSCCC-B-WWW-FFF-VR-AAAA Configuration B: Voltage class Luminous flux group Color specification L: Standard CRI H: 80 CRI Minimum Internal code Vf bin 0: Default Chromaticity group Color HVW = High Voltage White 31

32 Reflow Soldering Characteristics In testing, Cree has found XLamp XT-E HVW LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow-soldering equipment. Profile feature Lead-based solder Lead-free solder Average ramp-up rate (Ts MAX to Tp) 3 C/second max. 3 C/second max. Preheat: Temperature min (Ts MIN ) 100 C 150 C Preheat: Temperature max (Ts MAX ) 150 C 200 C Preheat: Time (ts MIN to ts MAX ) seconds seconds Time maintained above: temperature (TL) 183 C 217 C Time maintained above: time (tl) seconds seconds Peak/classification temperature (Tp) 215 C 260 C Time within 5 C of actual peak temperature (tp) seconds seconds Ramp-down rate 6 C/second max. 6 C/second max. Time 25 C to peak temperature 6 minutes max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. 32

33 Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Lumen Maintenance Cree now uses standardized IES LM and TM methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XT-E HVW LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL

34 Notes - Continued Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. 34

35 Mechanical Dimensions All measurements are ±.13 mm unless otherwise indicated. ANODE ANODE Top View Side View Bottom View Recommended PCB Solder Pad Recommended Stencil Pattern Hatched Area is Opening 35

36 REF Bo Tape and Reel XLamp XT-E HVW LED SECTION Y-Y R0.2 TYPICAL Ko Y D1 1.5 MIN. RE All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. T 0.30 ± ±0.05 Do Y P2 2.0 ±0.05 (I) Po 4.0 ±0.1 (II) CATHODE SIDE E ±0.1 All dimensions in mm. REF Bo F(III) W Ao /- 0.1 Bo /- 0.1 Ko /-0.1 F P 1 W / / /-0.1 R0.2 TYPICAL Ko SECTION Y-Y Y D1 1.5 MIN. REF R 2.24 X P1 X REF 0.59 Ao ANODE SIDE (I) (II) (III) (IV) Measured from centerline of sprocket hole to centerline of pocket. Cumulative tolerance of 10 sprocket holes is ± Measured from centerline of sprocket hole to centerline of pocket. Other material available. SECTION X-X Ao /- 0.1 Bo /- 0.1 Ko /-0.1 F / END P /- 0.1 W / ±.1 (I) Measured from centerline of sprocket hole to centerline of pocket. (II) Cumulative tolerance of 10 sprocket User Feed Direction holes is ± (III) Measured from centerline of sprocket 4±.1 8±.1 hole to centerline of pocket CATHODE (IV) SIDEOther material available. START ± Trailer 160mm (min) of empty pockets ANODE SIDE Loaded Pockets (1000 Lamps) Leader 400mm (min.) of empty pockets with at least 100mm /-0.5 OD 7.5'' MEASURED AT HUB MEASURED AT INSIDE EDGE 36

37 Packaging Unpackaged Reel Label with Cree Bin Code, Qty, Reel ID Packaged Reel Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Patent Label (on bottom of box) 37