VR44-MU-xxx-8yy-xxxxA

Transcription

1 44 UNIVERSAL INPUT LINEAR LED RETROFIT KITS Suitable for 2 x 4 luminaires Suitable for use in retrofit rebate programs Kitted for ease of Installation with provided harness Universal Voltage with 0-0V dimming Optional lens to diffuse light General Specifications Input Voltage Thermal Feedback Safety/Compliance L70= >60,000hrs / L90= >40,000hrs High performance efficacy up to 56lm/W culus Classified Class 2 Lighting System Applications: Airports, Offices, Schools, Residential Buildings, Stadiums, etc. 20~277V (+/- 0%) Input Current Please see page #2 for specific setup Input Power Please see page #2 for specific setup Input PF >0.9 THD <20% Dimming Type/Range 0-0V /00% ~ 0% Beam Angle 20 CRI Storage Temperature Range 80CRI -40 C to 00 C / -40 F to 22 F Operating Temperature Range (Ta) -40 C to 58 C / -40 F to 36.4 F Maximum Driver Case Temperature (Tc) TMUNV05P-40E Max: 88 C / 90.4 F TMUNV240P-96L Max: 85 C / 85 F TMUNV L Max: 86 C / 86.8 F TMUNV400-60L Max: 84 C / 83.2 F TMUNV200-88L Max: 90 C / 94 F Maximum Module Case Temperature L70: Tc max 05 C (Ts=0 C) / L90: Tc max 05 C (Ts=0 C) Estimated Lumen Maintenance 2 L70: >60,000Hrs / L90: 40,000Hrs Color Consistency Binning per ANSI 25 C; 3 SDCM Overall Size of Modules 44 L x.5 W x 0.39 H (20mm x 38mm x 0mm) Overall Size of Drivers TMUNV05P-40E 0.83 L x.22 W x 0.98 H (275mm x 3mm x 25mm) TMUNV240P-96L 6.69 L x 2.56 W x.26 H (70mm x 65mm x 32mm) TMUNV L 4.65 L x.8 W x.6 H (8mm x 30mm x 29.5mm) TMUNV400-60L 9.49 L x.69 W x.2 H (24mm x 43mm x 30.7mm) TMUNV200-88L 9.49 L x.69 W x.4 H (24mm x 43mm x 29mm) Packaging Components individually packaged Magnets Qty. / Magnetic Force 3 / 2N (.45lbf) per magnet Not Available Retrofit Kit: culus (File # E486779) RFI/EMI Input Surge Test Sound Rating Service Life Energy Efficiency Label (EEI-Label) Warranty Suitable for UL Class 2 Lighting Systems Compliant Dry and Damp Location CE Module (IEC 6203: AMD: 202, AMD2: 204) CE Drivers: TMUNV05P-40E TMUNV L TMUNV400-60L TMUNV200-88L SELV ( Drivers: TMUNV05P-40E / TMUNV L / TMUNV400-60L) FCC Part 5B Consumer, EN5505 References driver specification A Max. Tc of module and driver A++ 5 Max. Tc from the date of manufacture Measured electrical data per UL file 2 TM-2 Reported Numbers Page of 3

2 Part Number Matrix V R 44M U x xx 8yyxxxxA Product Line V = Vizion Type R = Retrofit Kit (culus Classified) Module 44 = 44 Dimming M = 0-0V Input Voltage # of Modules UNV = 20~277VAC 2 4 Max. Module Rated Power 95 = 95W CRI 3 8 = 80 Color Temperature 27 = 2700K 3 30 = 3000K 3 35 = 3500K 3 40 = 4000K 3 50 = 5000K 57 = 5700K 65 = 6500K Driver Output Current 0700 = 700mA 050 = 050mA 400 = 400mA 200 = 200mA 2400 = 2400mA 4200 = 4200mA Electrical and Optical Specifications LED Retrofit VR Number LED Module Part Number Number of Modules Drive Current per Module LED Driver Part Number Number of Drivers Input Voltage (V) Input Current 20/277V (A) Total System Power (W) Driver 277V (%) Total System Lumens (lm) VR44-MU A TMU240095CL840A 700 ma TMUNV L 20~277VAC 0.23/ VR44-MU A TMU240095CL840A ma TMUNV L 20~277VAC 0.225/ Total System Efficacy (lm/w) Wiring Diagram P 2P VR44-MU A TMU240095CL840A ma TMUNV05P-40E 20~277VAC 0.337/ VR44-MU A TMU240095CL840A ma TMUNV400-60L 20~277VAC 0.45/ VR44-MU A TMU240095CL840A ma TMUNV200-88L 20~277VAC 0.658/ VR44-MU A TMU240095CL840A ma TMUNV240P-96L 20~277VAC 0.738/ VR44-MU A TMU240095CL840A ma TMUNV200-88L 2 20~277VAC.359/ P 2P 4P 4P 2P (x2) Luminous Flux De-Rating: CCT and CRI Multipliers 2700K 3000K 3500K 4000K 5000K CRI 80(R9> 0) CRI 90(R9>50) K K NOTES: ) Performance based on Tc mod = 25 C. See thermal de-rating chart (pg. 3) for higher temperature operation 2) Standard lumen output and efficacy is calculated for standard options. Reference CCT & CRI vs Luminous Flux chart for lumen ratio calculation. 3) Specifications are subject to change without notice. 4) The LED DC Module can be configure with different LED chip quantities, series and parallel design configurations to meet a specific design requirement. Contact Fulham for further assistance. 5) 70CRI is NOT available 6) Driver See page #8 for Wiring Diagram 3 Standard Product offering (All other options are made to order with MOQ and lead time) Page 2 of 3

3 Thermal Specifications Storage Temperature Range Operating Temperature Range (Ta) Maximum Driver Case Temperature (Tc) Maximum Module Case Temperature LinearHO Retrofi Kit -40 to 00 C / -40 to 22 F -40 to 55 C / -40 to 3 F TMUNV05P-40E Max: 88 C / 90.4 F TMUNV240P-96L Max: 85 C / 85 F TMUNV L Max: 86 C / 86.8 F TMUNV400-60L Max: 84 C / 83.2 F TMUNV200-88L Max: 90 C / 94 F L70: Tc max 05 C (Ts=0 C) / L90: Tc max 05 C (Ts=0 C) Thermal De-Rating: Tc vs. Forward Voltage vs. Luminous Flux Module Case Temperature (Tc) 25ºC 30ºC 35ºC 40ºC 45ºC 50ºC 55ºC 60ºC 65ºC 70ºC 75ºC 80ºC 85ºC 90ºC 95ºC 00ºC Total Vf Multiplier Luminous Flux Multiplier Page 3 of 3

4 Certification Chart Classification Model VR44-MU-xxx-8yy-xxxxA YES YES Energy Star TM-2 Calculator Data Tc Module Reported L70 Reported L90 55 C >60,000 Hrs >54,000 Hrs 85 C >60,000 Hrs 46,000 Hrs 05 C >60,000 Hrs 40,000 Hrs Energy Efficiency Label (EEI-Label) Suitable for UL Class 2 Lighting System Drivers: TMUNV05P-40E TMUNV L TMUNV400-60L TMUNV200-88L Module: TMU40055CL8xxA TMU240095CL8xxA A++ YES Tc Module Calculated L70 Calculated L90 55 C 80,000 Hrs 54,000 Hrs 85 C 54,000 Hrs 46,000 Hrs 05 C 33,000 Hrs 40,000 Hrs Product Image: 44 Universal Input LED Troffer Retrofit Kits VR44-MU-xxx-8yy-xxxxA (Varies per Driver model) VR44-MU-xxx-8yy-xxxxA US0 277V Ph:(323) VRxx-MU-xxx-8yy-xxxxA LED LUMINAIRE RETROFIT KIT Input Voltage: VAC (50/60Hz) Input Current: Suitable for Dry or Damp Locations E DATE CODE WARNING: Risk of fire and electrical shock. Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit. Check for enclosed wiring and components. Avertissement: Risque d' incendie et d'électrocution. câblage des luminaires et pièces électriques peuvent être endommagés lors du forage pour l'installation du kit de conversion à DEL. Vérifier le câblage et les composants ci-joint LinearHO UNV Retrofit Kit includes: LED Module, LED Driver, Hardware, Labels & Installation Instructions Components individually packaged Page 4 of 3

5 Mechanical Drawings (Module) 44 [20mm] 0.39" [0mm] 44 [20mm].73 [44mm] 0.39 [0mm].8" [30mm] 4.33" [0mm] 4.33" [0mm] 2.36" [60mm] 4.33" [0mm] 4.33" [0mm] 2.36" [60mm] 0.8" [4.6mm].73" [44mm].5" [38mm] 2.7 [55mm].8 [30mm] 44" [20mm] Magnet Magnet Magnet.50 [38mm] ø0.5 x2 [ø3.8mm x2] 0. [2.8mm] BOTTOM VIEW Mechanical Drawings (Harness) TLC-HN mm mm mm mm ISOMETRIC VIEW (wire) Depth (connector) (connector) (connector) 22 [560mm] 0.73 [8.6mm] 0.74 [8.7mm] 0.33 [8.3mm] TLC-HN mm mm mm mm ISOMETRIC VIEW (wire) Depth (connector) (connector) (connector) 22 [560mm] 0.73 [8.6mm].8 [29.9mm] 0.33 [8.3mm] Page 5 of 3

6 Mechanical Drawings (Drivers) TMUNV05P-40E.22 (3mm) 5.59 (42mm) 0.83 (275mm) 0.43 (265mm) Tc R0.098 (R 2.5mm) 0.59 (5mm) 0.98 (25mm) 8.78 (223mm) 0.83 [275mm].22 [3mm] 0.98 [25mm] 6.69 (70mm) 6.22 (58mm) 5.7 (45mm) TMUNV240P-96L 6.69 [70mm] 2.56 [65mm].26 [32mm] R 0.09 (R 2.2mm) Tc.26 (32mm) 2.56 (65mm).35 (34.2mm) 4.5"(05.5mm).38"(35.0mm) TMUNV L Black White.8"(30mm) 0.65"(6.5mm) 0.35"(9mm) Tc 2.62"(66.5mm) 0.39"(0mm) 3.97"(00.9mm) 4.39"(.6mm) 4.65"(8mm) R (R 2.5mm) 0.35 (9mm).6 (29.5mm) Blue Red Gray Purple 4.65 [8mm].8 [30mm].6 [29.5mm] Page 6 of 3

7 Mechanical Drawings (Drivers-Cont.) TMUNV400-60L.69 (43mm) (6mm).04 (26.5mm) R 0.8 (R 3mm) Tc 2.75 (70mm).2 (30.7mm) 9.49 [24mm].69 [43mm].2 [30.7mm] Ø0.236 (Ø6mm) 8.32 (2.4mm) 8.89 (226mm) 9.05 (230mm) 9.49 (24mm) TMUNV200-88L R 0.2 (3mm) 0.87 (22mm) Tc.04 (26.5mm).69 (43mm) 8.3 (2.2mm).4 (29mm) 9.49 [24mm].69 [43mm].4 [29mm] Ø0.24 (6mm) 5.87 (49mm) 8.90 (226mm) 9.06 (230mm) 9.49 (24mm) Page 7 of 3

8 Wiring Diagram. Connect the driver positive wire( Red +) to the harness positive wires (Red +) 2. Connect the driver negative wire (Blue -) to the harness negative wires (Blue -) 3. Connect the harness positive wires (Red +) to the module(s) positive connector 4. Connect the harness negative wires (Blue -) to the module(s) negative connector One Module Wiring (P) Module # MODULE Bottom View TLC-HN02 Top View 0-0V Dimming (Purple/Gray) Red Blue LED Driver DRIVER Top View NEUTRAL LINE Two Module Wiring (2P) When using LED Retrofit VR number: VR44-MU A, use 2P Wiring Diagram per LED Driver Module # TLC-HN02 Top View 0-0V Dimming (Purple/Gray) Red Blue LED Driver DRIVER Top View NEUTRAL LINE Module #2 MODULE Bottom View Four Module Wiring (4P) Module # Module #2 MODULE Bottom View 0-0V Dimming (Purple/Gray) Red Blue LED Driver NEUTRAL LINE TLC-HN04 Top View DRIVER Top View Module #3 Module #4 MODULE Bottom View Page 8 of 3

9 Accessories (Not included with kit) 44" Diffuser Lens Fulham Part Number: 44": TLE-OPT White polycarbonate diffuser lens - 82% transmissivity at nominally rated currents..73" [44mm] 0.78" [9.7mm] ISOMETRIC VIEW Installation Steps when using clamps:. Place the LED Module on the luminaire surface. 2. Place the Diffuser lens on top of LED module (line it up with LED module mounting edges). 3. Push down to snap into place. End Caps Fulham Part Number: TLE-OPT White Polybutylene Terephthalate (PBT) end caps R 0.76 (8.2mm) 0.96 (5mm) (2mm) \ CT R0.059 (.5mm) ISOMETRIC VIEW.397 (35.5mm) (6mm) \ CT Interconnects Interconnect Type: WAGO Double pins to interconnect Modules (# ) Approvals: curus, UL 977, and Compliant NOTES: ) Interconnects are NOT sold by Fulham. 2) For more detail information, please visit Wago s website: Bottom View Page 9 of 3

10 Luminaire Compatibility LED Retrofit VR Number Compatible Luminaire Type VR44-MU-95-8yy-0700A VR44-MU-295-8yy-0700A VR44-MU-295-8yy-050A VR44-MU-295-8yy-400A VR44-MU-495-8yy-200A VR44-MU-495-8yy-2400A VR44-MU-495-8yy-4200A Troffer Recessed Luminaire (x4) Troffer Recessed Luminaire (2x4) Linear Highbay Luminaire (4 Lamp) Vapor Tight Luminaire (x4) Vapor Tight Luminaire (2x4) Number of LED Modules Number of LED Drivers Input Input Current (A) Voltage (VDC) 20V 277V Total System Power (W) Driver Efficiency (%) Total System Lumens (lm) Total System Efficacy (lm/w) Troffer Luminaire Vapor Tight Luminaire Highbay Luminaire NOTES: ) Checkmark ( ) = culus Classified Application 2) = Check with your local utility for energy rebate opportunities 3) All electrical and lumen calculations based at 277V Page 0 of 3

11 Guidelines (Reference instruction sheets for detail installation of VR kit) Termination Notes Connector Type: WAGO # (2 pin push wire connector) AWG: solid wire Strip length: 8...9mm / in Connector Fastening Notes If fastening by screw hole, use any screw with diameter less than 0.85 in (4.7mm). Use all available screw holes to ensure good contact between back side of module and mounting surface. Refer to max specified torque for installation. Suggested screw sizes: #6 or M4 Pan Head screw. If fastening using double-sided tape, start with clean, oil-free and dust-free surface. Peel backing and place LED module on mounting surface. Firmly press down on the module to ensure good adherence. Follow the double-side tape manufacturer s installation instructions. BJB P2F (Push-to-Fix) fixing elements for PCBs can be used to fasten LED modules to mounting surface. Reference BJB's website for ordering information and specific model to use: Environmental Rating / Conformal Coating The DC LinearHO Modules have been evaluated for use in dry or damp locations only. If used in wet locations, acceptability and the need for additional evaluation shall be determined in the end product. Electrostatic Sensitive Product (ESD) Fulham's LinearHO modules are available with conformal coating; made to order with MOQ and lead time will apply. The conformal coating is a silicone based material which is double sprayed on the module only (LEDs and PCB). Conformal coating is recommended for the following applications: near ocean where salt is present, constant moisture, refrigeration, continuously high humidity, or outdoor applications. An IP rating of IP64 or IP65 is achieved when the conformal coating is used, but other factors should be considered. Fulham still recommends the luminaire also meet an IP64/65 rating. Fulham LED products should be handled with proper measures to protect against any potential ESD damage. When servicing, personnel should be ground and direct contact with LED should be avoided. Thermal Management Proper thermal management should be employed to ensure life and reliability of product. Max Tc of module should not be exceeded. Use of thermal grease, paste, pad, or other material interface is highly recommended. Polarity Notes DC Modules are polarity sensitive. Ensure that positive from LED Driver is connected to positive of LED modules and that negative from LED Driver is connected to negative of LED modules. Polarities of modules are marked with + for positive and - for negative. Page of 3

12 Color and Binning Optical Spectrum % 0.4 CIE, y K 4000K 3500K 3000K 2700K Relative Radiant Power (%) (y) 80% 60% 40% 20% 2700K 3000K 3500K 4000K 5000K SCDM Rectangle 3 SCDM Ellipse CIE, x 0% Wavelength (nm) (x) NOTES: ) The Color and Binning and Optical Spectrum charts are for reference only. For more detailed info, contact factory. 2) Reference Samsung Chromaticity Diagram for Color and Binning. Binning per ANSI 25 C; 3 SDCM. 3) The Optical Spectrum values vary depending on product type and color rank. 4) Driver not included. Page 2 of 3

13 Packaging Components individually packaged LED HARNESS TLC-HN02 TLC-HN04 LED LINEARHO MODULE TMU240095CL8yyA LABELS LABEL # LABEL #2 HARDWARE LED DRIVER HHILPF00049 TMUNV L TMUNV05P-40E TMUNV400-60L TMUNV200-88L TMUNV240P-96L Page 3 of Rev B