COMMERCIAL REFRIGERATION SILENSYS INVERTER. Precision, Energy Saving, Multi-use

Transcription

1 COMMERCIAL REFRIGERATION SILENSYS INVERTER INVERTER Precision, Energy Saving, Multi-use

2 L unique constructeur à maîtriser technologies de compresseurs SILENSYS INVERTER SILENSYS: A REPUTATION BUILT OVER YEARS Tecumseh offers the widest range of condensing units on the market, from traditional to housed and quiet units to meet all your requirements (small retail outlets, sit down and take-away restaurants, company and mass catering). Tecumseh has developed its expertise by designing high performance solutions over many decades, producing quiet and high quality condensing units. Our SILENSYS range meets the industry s high standards in terms of acoustic performance, reliability and plug and play. Tecumseh is now pleased to offer SILENSYS with a variable capacity solution. Key features of the product SILENSYS INVERTER presents the following key features: A proven standard Tecumseh reciprocating compressor. A proven controller with a good reputation. SILENSYS know-how and reliability, state of the art product in terms of quality and acoustics. Ability to operate in high ambient temperatures up to 46 C. Easy-to-use: all parameters are pre-set at -0 C evap. and ready to plug. Inverter drive Logo Switch button with modes: - OFF - INVERTER - MAINTENANCE Markets served by SILENSYS INVERTER Frequency variation from 0-60Hz can supply several cold rooms. SILENSYS INVERTER serves specific applications that require either a fine variation of refrigeration production or large thermal load variations. SILENSYS INVERTER provides a major improvement to the fine-tuning of regulation. ON/OFF is replaced by the variable speed control. SILENSYS INVERTER energy efficiency and environmental impact The stability of the evaporation pressure allows energy savings up to 5% with less icing (defrost cycle) of the evaporator and through better stability of the evaporation pressure. The equipment is selected with the maximum heat load, which in reality represents only a few days per year. To evaluate energy performance, Tecumseh takes into account the variations of thermal loads throughout the year. The stability of the evaporation pressure maintains the coefficient of performance (COP) of the compressor and explains the energy saving of the installation. A full range Tecumseh standard compressors Controller that facilitates the use of the SILENSYS INVERTER R404A 9 models at -0 C evaporating temp. R4a 6 models at -0 C evaporating temp. SILSHV460ZYZ SILAGV45Y TZ SILAGV4568ZTZ SILAGV454Y TZ SILAGV455Z TZ SILFHV455Y TZ SILAGV4546ZTZ SILAFH458Y TZ SILFHV4540Z TZ SILAJV45Y TZ SILFHV45Z TZ SILAJV449Y TZ SILFHV454Z TZ SILAJV457Z TZ SILAJV95Z TZ Cooling performance (Watts) EN5 at C ambient, superheat 0K, sub-cooling K Cooling performance (Watts) EN5 at C ambient, superheat 0K, sub-cooling K.

3 SILENSYS INVERTER KEY BENEFITS SILENSYS INVERTER Energy saving Low operating cost 68% SILENSYS INVERTER will meet the system cooling demand. Consequently, average energy consumption during the operation time will be reduced by up to 5%. Accurate regulated temperature RANGE OF DESIRED TEMPERATURE REDUCED BY / WITH SYSTEM VERY CLOSE TO DESIRED TEMPERATURE Energy saving LARGE TEMPERATURE DIFFERENCE High energy consumption DESIRED TEMPERATURE FIXED SPEED SYSTEM TIME TEMPERATURE SILENSYS INVERTER is the best solution to fine-tune the required temperature and hydrometry in your cold room. The improved system control will avoid any ambient fluctuations and improve the life and quality of perishable food. INVERTER SYSTEM START (The unit is turned on) Multiple cold rooms Just one SILENSYS INVERTER will allow you to manage many cold rooms. Refer to page 5: QUICK SELECTION GUIDE

4 Plug & Play Connect the pressure sensor on the compressor valve Turn ON (Auto position, factory pre-set at -0 C for refrigerants R404A and R4a Follow the installation guide to fine tune the factory setting (Set point, inside the authorised range) Key benefits Increased safety The speed variation is limited from 0 to 60Hz in order to secure the compressor, motor and electrical components modes: INVERTER with capacity variation or ON/OFF regulation Ability to operate at high ambient temperature through the condenser (HTA)* Low noise and vibration Oil return (Optional) Easy maintenance and customer service Assembly time Reduction of components Dedicated Tecumseh Europe technical support Technicians are trained and in contact with inverter experts Installation speed Ergonomics in the installation Assembly time Reduction of components A plug and play solution to save installation time and maintenance * HTA : High Temperature Ambient DIFFERENTS BENEFITS FOR DIFFERENTS STAKEHOLDERS For the end customer SILENSYS INVERTER offers the following benefits to the end customer: A lower cost in the case of multiple cold room. A lower installation cost due to the reduced number of components. An operating cost with possible savings of up to 5% A quiet condensing unit for facilities in urban areas. For the installer SILENSYS INVERTER offers the following benefits to the installer: A "Plug & Play" condensing unit with a small number of connections and little wiring. A condensing unit that offers the reliability of a standard Tecumseh compressor available in wholesale networks. A decreased number of condensing units installed reduces maintenance. To get the expected benefits, do not oversize the unit. 4

5 QUICK SELECTION GUIDE: SILENSYS INVERTER evaporators st configuration: Having slightly different cooling capacities, (up to 0%) evaporators Each one will have the same cooling capacity Example: at 0% Delta 0.84kW and 0.67kW >.5kW needed* Use the correcting factor** of 0.9 >.6kW to select the SILENSYS INVERTER Example:.4kW +.4kW +.4kW > 7.kW needed* Use the correcting factor** of 0.85 > 6.kW to select the SILENSYS INVERTER Model Cooling capacity Comments Model Cooling capacity Comments SIL AJV 449Y 60Hz >.6kW 4Hz > 0.84kW 0Hz > 0.74kW SILENSYS INVERTER matches the capacity requirement with longer runtime expected SILENSYS INVERTER matches the capacity requirement 9% Delta between lowest cooling demand and SILENSYS INVERTER smallest capacity () : The condensing unit will run less SIL AGV 4546Z 60Hz > 6.kW Hz > 4.8kW 0Hz >.48kW SILENSYS INVERTER matches the capacity requirement with longer runtime expected SILENSYS INVERTER matches the capacity requirement 45% Delta between lowest cooling demand and SILENSYS INVERTER smalest capacity (). A pressure control valve is needed to keep constant evaporating pressure () When the smallest evaporator runs alone, the evaporating temperature will be stabilised around - C (-K) () When a SILENSYS INVERTER feeds evaporators or evaporators having 0% of capacity difference, the suction pressure captured by the pressure sensor will be stabilised around -8 C (-8K). To keep the evaporating pressure constant and the humidity level (flower, fresh meat conservation) inside the cold room, it will be helpful to install an evaporating pressure control valve. Because of suction pressure drop, adjust the P-04 and P-06 parameter under the estimated suction pressure to avoid cutting during winter time. evaporators nd configuration: With the same cooling capacity Example: x 4.6kW = 9.kW, needed* 4 evaporators and more Example: kw + kw x kw > 8kW, or 6 x.5kw > 9kW needed* Use the correcting factor** of 0.8 > 7.kW, select the SILENSYS INVERTER: SILAGV 455Z TZ Model Cooling capacity Comments SIL AGV 4568Z 60Hz > 9.6kW 0Hz > 5.kW SILENSYS INVERTER matches the capacity requirement % Delta between lowest cooling demand and SILENSYS INVERTER smallest capacity: The condensing unit will run less... Caution: adjustment and use will ensure that the minimum rate will be equal or higher than 70% of the SILENSYS INVERTER cooling capacity at 0Hz. Because of suction pressure drop, adjust the P-04 and P-06 parameter under the estimated suction pressure to avoid cutting out during winter time. * Operating conditions: Tevap:-0 C, C ambient temperature, 6h working per day, Super heat 0K subcooling K EN5 ** Number of room Correcting factors Rules Inverter program necessary setting : P-04 and P-06 None 0.9 (dependent on the capacity balance) the minimum rate will be equal or higher than 80% of the SILENSYS INVERTER cooling capacity at 0Hz. Yearly lowest suction pressure estimation 0.85 the minimum rate will be equal or higher than 70% of the SILENSYS INVERTER cooling capacity at 0Hz. Yearly lowest suction pressure estimation the minimum rate will be equal or higher than 70% of the SILENSYS INVERTER cooling capacity at 0Hz. Yearly lowest suction pressure estimation Correcting factors are made to compensate for the worst case scenario of calculation. 5

6 SILENSYS INVERTER TECHNICAL DATA R-404A COMMERCIAL POSITIVE REFRIGERATION Model SIL AJV 95 Z SIL AJV 457 Z SIL FHV 454 Z SIL FHV 45 Z SIL FHV 4540 Z Cooling capacity (W), EN 5, Ambient temperature C, superheating 0K, subcooling K, R404A* BOM S9904 S99004 S99504 S99704 S99804 Ambient temp. C Hz Frequency Cooling capacity (W) Absorbed power (W) Evaporating temperature ( C) Evaporating temperature ( C) SIL AGV 4546 Z S SIL AGV 455 Z S SIL AGV 4568 Z S SIL SHV 460 Z S / / / / / *Cooling capacity is given for information purpose and may change, without prior notice, with improvements that Tecumseh Product Company are permanently making to its products. Pre setting of the inverter (P-0) Suction pressure reference -0 C.4 bar CUSTOMER SERVICE Dedicated Tecumseh Europe technical support Technicians are trained and in contact with INVERTER experts 6

7 SILENSYS INVERTER R-4a Model SIL AJV 449 Y SIL AJV 45 Y SIL FHV 458 Y SIL FHV 455 Y SIL AGV 454 Y SIL AGV 45 Y Cooling capacity (W), EN 5, Ambient temperature C, superheating 0K, subcooling K, PHASES, R4a* BOM S S99004 S9904 S99604 S S COMMERCIAL POSITIVE REFRIGERATION Ambient temp. C Hz Acoustics, Dimensions, Connections Frequency Cooling capacity (W) Absorbed power (W) Evaporating temperature ( C) A higher performance with a low noise level Evaporating temperature ( C) Pre setting of the inverter (P-0) Suction pressure reference *Cooling capacity is given for information purpose and may change, without prior notice, with improvements that Tecumseh Product Company are permanently making to its products -0 C bar R4a R404A Models Imax C.U.(60 Hz) Weight Acoustic pressure Receiver Volume Diameter of connection Fan Fan absorbed power I max Net Gross 0m** Suction Liquid Nbr Diam. Per fan L A Kg Kg db(a) Ø Ø mm W SIL AJV 449 Y TZ / / SIL AJV 45 Y TZ /8 / SIL AFH 458 Y TZ /8 / SIL FHV 455 Y TZ /8 / SIL AGV 454 Y TZ /8 / SIL AGV 45 Y TZ /8 / SIL AJV 95 Z TZ /8 / SIL AJV 457 Z TZ /8 / SIL FHV 454 Z TZ /8 / SIL FHV 45 Z TZ /8 / SIL FHV 4540 Z TZ /8 / SIL AGV 4546 ZTZ /8 5/ SIL AGV 455 Z TZ /8 5/ SIL AGV 4568 Z TZ /8 5/ SIL SHV 460 Z YZ /8 5/ **Acoustic pressure at 50Hz with maximum fan speed Fan voltage V 7

8 4 6 N Electrical drawings F0 V0 U9 P KM L T L L' L U L T L 4T L L' 5L C A D B 5 6T L 8 6 L T L 4T 5L 6T For more information, please refer to electric data documentation / Pour plus d'information, voir document données électriques. L L 5L N D T 4T 6T 8T4 D4 L T L 4T 5L 6T KM L T BN L 4T BN 5L 6T 4 X X V U P L L' L U L L V L EMC - Filter L' L' L W 9 4 C D B A PE' U D L L BN M DE85 SIL FH... Y/Z TZ (INVERTER) Ce plan est propriété exclusive de notre société, tous droits de reproduction et de diffusion réservés / This drawing is the property of our society, copyrights and publications reserved. X L L L K M 6T 4T T L D KM BN5 4 BN8 X 0 M A M C 8 BN7 M X U M B X KM BN9 NC NC R BN6 P BN4 KM A A S X LP HP RPM G ND 0-0V +0V KM A A RD KM A A 4 P8 L P K M 4 X Consigne: Setpoint (bar) Cut-out: (bar) Diff: X S C S S S S 4 S 5 S 6 + V A A A C U Digital inputs Analog inputs Paramètres par défaut : Default parameters : (bar) R404A.4.6. R4a DE85_d Drawing Number DE85 DE850* Reference SIL AJV 95 Z TZ SIL AJV 449 Y TZ SIL AJV 45 Y TZ SIL FHV 454 Z TZ SIL FHV 45 Z TZ SIL FHV 4540 Z TZ SIL FHV 458 Y TZ SIL FHV 455 Y TZ EC58848 EC5760 A.M. File no. Ce plan est propriété exclusive de notre société, tous droits de reproduction et de diffusion réservés / This drawing is the property of our society, copyrights and publications reserved. d Inversion bornier X et contacteur KM 9/05/4 MV FF EX57 TECUMSEH EUROPE S.A c Modif position disjoncteur commande + MAJ 8/0/4 MV FF DE85 Ind. Modifications Date Visa Verif. Origine 8090 VAULX MILIEU Rev. Change content Date Sign. Check Origin SIL SHV 460 ZYZ EMC - Filter L V L 4T L' L W 5L 6T PE' U QO Q KM X L T L T L T U L 4T L 4T L 4T V M 5L 6T 5L 6T 5L 6T W + 8T4 PTC PTC F X X PTC P4 4S KM KM X L INT69 PTC X LP HP NC NC A A L KM KM NC NC A A X 4 U9 KM M A M B A A R D SCHEMA ELECTRIQUE TFH TENSION T SILENSYS TAILLE M VITESSE VARIABLE M 7 X X F7 KM X 4 M 5 P KM X RPM G ND 0-0V +0V KM KM R X M Consigne: Setpoint (bar) Cut-out: (bar) Diff: L P P9 4 4 K M X (bar) DE85 S C S S S S 4 S 5 S 6 + V A A A C U9 Digital inputs Analog inputs Paramètres par défaut : Default parameters : R404A.4.6. Indice Revision d DE85* DE85 DE854* SIL AGV 4546 Z TZ SIL AGV 455 Z TZ SIL AGV 4568 Z TZ SIL AGV 454 Y TZ SIL AGV 45 Y TZ SIL SHV 460 Z YZ SIL AJV 457 Z TZ * Drawing available on request For more information, please refer to electric data documentation / Pour plus d'information, voir document données électriques. DE85_c EC5805 c Mise a jour 0/04/4 MV FF - TECUMSEH EUROPE S.A EC5690 b Ajout pont entre borne et du X 06/0/4 MV FF A.M. Ind. Modifications Date Visa Verif. Origine 8090 VAULX MILIEU File no. Rev. Change content Date Sign. Check Origin SCHEMA ELECTRIQUE SH TENSION YZ SILENSYS TAILLE XL VITESSE VARIABLE DE85 Indice Revision c 8

9 SILENSYS INVERTER Dimensions C Sizes A B C S 90 mm M L 690 mm 45 mm 575 mm 5 mm A B XL 65 mm 00 mm Product model number, reference and size R-404A R-4a Packaging Product Model Number Reference Size SIL AJV 95 Z TZ S9904 S SIL AJV 457 Z TZ S99004 M SIL FHV 454 Z TZ S99504 M SIL FHV 45 Z TZ S99704 M SIL FHV 4540 Z TZ S99804 M SIL AGV 4546 Z TZ S99504 L SIL AGV 455 Z TZ S99504 L SIL AGV 4568 Z TZ S99504 L SIL SHV 460 Z YZ S XL SIL AJV 449 Y TZ S S SIL AJV 45 Y TZ S99004 S SIL FHV 458 Y TZ S9904 M SIL FHV 455 Y TZ S99604 M SIL AGV 454 Y TZ S L SIL AGV 45 Y TZ S L Controller for all models - - High quality Similar packaging of SILENSYS Dedicated palets Standard forklift indication Easy to unpack Tiltwatch * on S and M size Logo Tiltwatch *Tiltwatch: Turns red if the package it is affixed to is tilted past 80 or is completely up-ended. However, it remains unaffected by movement due to normal handling conditions. Forklift indications 9

10 0 Notes

11 SILENSYS INVERTER Notes

12 SALES AND MARKETING HEAD OFFICE, avenue Blaise Pascal Bât. B Vaulx-Milieu France Tel. int + (0) Fax int + (0) GERMAN OFFICE Ludwigstrasse 60 7 Frankfurt am Main Germany Tel. int +49 (0) Fax int +49 (0) ITALIAN OFFICE Via Parco Abbaziale, Giaveno (TO) Italia Tel. int +9 (0) Fax int +9 (0) SPANISH OFFICE C/Corcega 0-0,, a Barcelona España Tel. int Fax int BRITISH OFFICE One Victoria Square B BD Birmingham United Kingdom Tel. int + 44 (0) Fax int + (0) MALAYSIAN OFFICE N 8 Jalan Sultan Mohamed 4 Selat Klang Utara Port Klang Selangor Darul Eshan Malaysia Tel. int Fax int Tecumseh Europe : the commercial refrigeration specialist Tecumseh Europe is a major player in the refrigeration and climatic comfort industry, is a subsidiary of the American group Tecumseh Products Company. As a human-sized international company, Tecumseh Europe designs and manufactures compressors and condensing units using new technologies, which positions it as the leader in commercial refrigeration. Today, about 5% of global food consumption is spoiled due to non-compliance with the cold chain. Facing this reality, Tecumseh aims to offer a range of high added-value products and services. Values in the service of customers and the company For 80 years, Tecumseh s success has been based on key values shared by its managers and all its employees: the human value: the people that make up the company the current customer orientation and the place given to its customers the importance of the quality of services and products offered the permanent technological innovation. The people: the company's most important resource This value can be seen especially in the professionalism of each employee, all of whom have significant technical and commercial skills as well as a real industrial dimension. The development of skills by in-house training and promotion aims to involve employees to a greater degree. Innovative products Since 94, Tecumseh has been committed to developing products using innovating technologies that guarantee low energy consumption as well as a high level of reliability. Today, Tecumseh is the only company that offers its customers the technologies used in a hermetic compressor: Reciprocating, Rotary and Scroll. Internationally recognised, the benchmark brands of the Group such as L Unité Hermétique, Silensys, Wintsys, Masterflux, Celseon, and Vector form part of the pillars of the refrigeration industry thanks to a strong distribution network with thousands of points of sale on all 5 continents. Tecumseh also offers service Tecumseh offers a complete assistance service from the selection of products, design, and training, to on-site technical assistance by a high-performance Sales Administration department. Tecumseh: the desire to propose a green offer Being aware of future economic and ecological demands, the company is committed to sustainable development by offering products that use the refrigeration fluids in phase with the current market. Because it follows a rigorous approach of continuous improvement, Tecumseh works according to the ISO 400 certification (environmental management system) as well as standard ISO 900 for its quality management system. With more than,50 employees, Tecumseh Europe focuses on innovation, quality of the products with complete solutions. At present and for the foreseeable future, the company is the best supplier of 00% customer-oriented commercial refrigeration. Silensys Inverter catalogue EN 07/05 - Photos Tecumseh - Thinkstock - Héloïse Peyre, Jean-Philippe Darbois. sales&marketing@tecumseh.com L'Unité Hermétique is a Tecumseh brand internationally recognised by professionals in the cooling industry, stands for reliability, expertise and skill. Tecumseh offers solutions labelled "Expertise L Unité Hermétique", referencing their performance as the historical benchmark of the refrigeration market on all 5 continents.