DOOR/S WITH INTERNAL FIXED SHELF - TOUCH RELEASE & CORIAN HANDLE OPTIONS. American Oak, Charcoal Oak, Pony Oak, Hazelnut Oak

Transcription

1 page 1 of 9 DOOR/S WITH INTERNAL FIXED SHELF - TOUCH RELEASE & CORIAN HANDLE OPTIONS To see the complete ISSY range go to SPECIFICATIONS Recommended use Materials Timber Colours Corian Colours Fixing (not included) Basin Domestic, Commercial & Hotel Vanity Frame - Veneer & Solid American Oak Bench Top - Corian American Oak, Charcoal Oak, Pony Oak, Hazelnut Oak Glacier White, Sonora, Oyster, Deep Night Sky Bolted / Screwed to Wall by a Licensed Trades Person Sold Separately, refer to Brochure STANDARD SIZES Width (mm) Depth (mm) Height (mm) Number of Doors Basin Options CUSTOM SIZES Width (mm) Depth (mm) Height (mm) Number of Doors Basin Options Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/ distributor takes no responsibility for printing errors. Tech Page Version 1

2 page 2 of 9 FINISH OPTIONS TIMBER OPTIONS CORIAN OPTIONS AMERICAN OAK HAZELNUT OAK GLACIER WHITE SONORA PONY OAK CHARCOAL OAK OYSTER DEEP NIGHT SKY 150DIA CORIAN HANDLE OPTIONS **Corian handle and top to be in same finish GLACIER WHITE SONORA OYSTER DEEP NIGHT SKY DESIGN FEATURES: Touch release door/s opening OR 150dia Corian Handle/s opening with soft close hinge 45mm edge fixed support panel Signature Halo routing door detail (Strips of Solid and Veneer American Oak) American Oak Veneer carcass with standard Glacier White Corian Top (additional cost for Oyster, Sonora & Deep Night Sky) Internal fixed shelf with Veneer linning CLEANING RECOMMENDATIONS Your timber frame should be cleaned with a mild, non-acidic, non-abrasive detergent and soft cloth. Finish by cleaning off detergents with a soft damp cloth and towel dry. Always clean spills and water immediately. Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions. **Please ensure a copy of the installation instructions is left with the end user for future reference

3 page 3 of 9 STANDARD SIZES fixed support panel 500W x 450D x 450H INTERNAL VIEW for all size SIDE VIEW for all sizes 600W x 450D x 450H 1000W x 450D x 450H 1200W x 450D x 450H 1500W x 450D x 450H 1800W x 450D x 450H

4 page 4 of 9 CUSTOM SIZES fixed support panel W x D x 450H INTERNAL VIEW for all size SIDE VIEW for all sizes W x D x 450H W x D x 450H W x D x 450H W x D x 450H W x D x 450H W x D x 450H

5 page 5 of 9 STANDARD SIZES WITH CORIAN HANDLE fixed support panel 500W x 450D x 450H INTERNAL VIEW for all size SIDE VIEW for all sizes 600W x 450D x 450H 1000W x 450D x 450H 1200W x 450D x 450H 1500W x 450D x 450H 1800W x 450D x 450H

6 page 6 of 9 CUSTOM SIZES WITH CORIAN HANDLE fixed support fixed panel support panel fixed support panel W x D x 450H INTERNAL VIEW for all size SIDE VIEW for all sizes W x D x 450H W x D x 450H W x D x 450H W x D x 450H W x D x 450H W x D x 450H

7 page 7 of 9 STANDARD CORIAN CUTOUT *Suitable for recommended Counter Top Basins W: CENTRAL ONLY 1000W: CENTRAL OFFSET LEFT & RIGHT 1200W: CENTRAL OFFSET LEFT & RIGHT 1500W: DOUBLE BASIN OFFSET LEFT & RIGHT 1800W: DOUBLE BASIN OFFSET LEFT & RIGHT

8 page 8 of 9 45DIA CORIAN CUTOUT *Suitable for recommended Vessel Basins W: CENTRAL ONLY 1000W: CENTRAL OFFSET LEFT & RIGHT 1200W: CENTRAL OFFSET LEFT & RIGHT 1500W: DOUBLE BASIN OFFSET LEFT & RIGHT 1800W: DOUBLE BASIN OFFSET LEFT & RIGHT

9 page 9 of 9 VANITY FITTING INSTRUCTIONS Prior to installation it is important to inspect the vanity to ensure no damage has occurred in transit. If damage has occurred, or a visible defect exists, do not proceed with installation and advise supplier immediately. No warranty claim for damage will be accepted if the vanity is installed. It is recommended that the Vanity Top/ doors are protected during installation Please Note: Manufacturer will not be liable for the cost of installation or removal of the vanity and the warranty will be voided if damage occurred during or after installation. 1. To aid Installation; first remove doors by unscrewing the hinges. Doors will slide off hinge bracket. Place doors in a secure location in the meantime. 2. Check that the unit will fit into the location. On timber studded walls, mark the positions of the studs, so to be able to fix the unit to these later. 3. Line up the unit so that the units waste chamber aligns with the corresponding plumbing. Holes for waste outlet through the back are not pre-drilled. This outlet is left to the discretion of the plumber. Mark where unit is to be installed. SILICON 4. Mount unit by screwing through any part of the back of the unit into the wall, ensuring contact to studs. 5. Ensure Corian is right way up. Silicon to secure and mount permanently. Addtional Silicon is also required on the edge of the vanity where the Corian meets the tiles/ wall. If wall to wall, all four edges require Silicon. 6. Attach doors back on by sliding the hinges back on the bracket, and screw accordingly. 7. Ensure the vanity is installed level; as this will effect the alignment of the doors. **Recommendation for Plumbing Waste should not be over tightened to avoid stress on basin and top.