High Pressure Valves Series Angle Valves Series Angle Valves
|
|
- Noah Hancock
- 5 years ago
- Views:
Transcription
1 High Pressure Valves Series Angle Valves Series Angle Valves Description High pressure angle valves with split body. Connections manufactured to IG standards. Other high pressure screwed connections or fl anges are possible. These valves provide a basis for high pressure relief special designs e.g. with wear bushes, dissipator sleeves, additional aperature plates. Furthermore, due to their unique construction, they can be manufactured from almost any desired material. Technical Data Series Valve body style Characteristics Seat leakage, standard Material for plug/seat ring 316Ti Optional: , Stellite ceramics, tungsten carbide Angle Equal%, Linear, On-Off 0.01 of k vs value 316Ti Optional: Stellite, Hastelloy C titanium, ceramics, tungsten carbide PTFE-soft seat (T = max. 150 C) In seat ring k vs for tighter seating In plug from k vs 1.0 for tighter seating Packing PTFE for temperatures up to +200 C Grafoil for temperatures over +200 C PTFE for oxygen services Packing according to German clean air act (TA-Luft) Body gaskets PTFE for temperatures from up to +200 C Extensions 316Ti for temperatures over +200 C Standard, normalizing fi ns, bellows seal, cryogenic k vs values See tables pages 4/5 Connections Screwed internal* DN 3-10, PN Screwed fl anges acc. to IG Std. NW 3-16, ND DIN-fl anges DN 10-15, PN ANSI-fl anges ½, Class Valve body 316Ti, WNR Optional: Hastelloy C or other materials according to pressure rating * Manufactured according to customers requirements; suitable for superpressure connectors. Screwed fl anges acc. to IG Std. NW 16-45, ND DIN-fl anges DN 25-50, PN ANSI-fl anges 1-2, Class KMEBR
2 Standard valve with fl ange connections Super pressure valve PN 4000 ( lbs) Valve with normalizing fi ns -30 to 0 C resp. 250 to 400 C 2 Valve with bellows seal
3 Valve with partially balanced plug Multi-stage high pressure letdown valve for low noise and reduced wear Standard trim Low noise cage trim Ceramics or tungsten carbide plug tip and seat insert Trim with PTFE soft seat (series ) 3
4 Series standard K vs values Size NW Stroke (mm) Stem diameter (mm) * K VS 0,25 = K V x F R acc. to IEC 534. **For calibrating conditions. Further special K VS values on request. Kvs value* Reynolds Factor Kämmer (FR) Seat diameter (mm) Rangeability** Plug material, standard Seat material, standard Characteristics, lin Characteristics, gl Alternative materials for seat/plug Tungston carbide; Hastelloy C Nickel; Monel; Titanium; Stellite x x x x x x x x x x : x x x x Stellite - x x x x x x x x x x x x x x x x : Valve code P Valve type Bonnet extension Actuator Series Angle valve Angle valve Standard Normalizing fi ns Bellows seal Cryogenic extension H3, H4, H5 Manual handwheel P2, P3 P4, P5 37, 38 39, 3D Pneumatic, series 2 Pneumatic, series 4 with integeral positioner 4 E2, E3 E4, E5 Electric 4
5 Series standard K vs values Kvs value Seat diameter (mm) Rangeabilty* Seat material (standard) Plug material (standard) Size NW Size DIN / ANSI /1 50/2 Stroke (mm) Stem diameter** (mm) *For calibrating conditions. Further special K VS-values on request. ** For thrusts 1000 dan stem diameter = 16 mm : Dimensions (mm) and weights (kg) B F A NW Dimensions A/B Height F Weight ND 325 ND 500 ND 700 Standard Fins Bellows Standard Fins Bellows
6 Regional Headquarters Flowserve EMA Flowserve America Flowserve Asia Burrell Road, Hayward Heath 1350 N. Mt. Springs Prkwy. 12 Tuas Avenue 20 West Sussex, RH16 1TL Springville, UT England USA Republic of Singapore Telephone: +44 (0) Telephone: Telephone: Facsimile: +44 (0) Facsimile: Facsimile: Main Sales Offi ces EMA (Europe, Middle East, Africa) Flowserve France Flowserve Switzerland Flowserve Germany Flowserve Eastern Europe 7 Avenue de la Libération Allee du Quartz 1 Manderscheidtstr , av. du Québec Thiers Cedex CH-2300 La-Chaux-de Fonds Essen 91965, Courtaboeuf Cedex France Switzerland Germany France Telephone: +33 (0) Telephone: +41 (0) Telephone: +49 (0) Telephone: +33 (0) Facsimile: +33 (0) Facsimile: +41 (0) Facsimile: +49 (0) Facsimile: +33 (0) Flowserve South Africa Flowserve Middle-East Flowserve Austria Flowserve Benelux Unit 1 C/O Saleh & Abdulaziz Abahsain Kasernengasse 6 Van Leeuwenhoekweg 6 12 Director Road P.O. Box 209 Spartan Ext 2, Kempton park Gauteng Al Khobar Villach 3225 LX Hellevoetsluis South Africa 662 Saudi Arabia Austria The Netherlands Telephone: Telephone: Telephone: +43 (0) Telephone: +31 (0) Facsimile: Facsimile: Facsimile: +43 (0) /51 Facsimile: +31 (0) Flowserve Italy Flowserve Spain Flowserve Portugal Flowserve Scandinavia Via Prealpi, 30 Luis Cabrera, Av. Dr. Antunes Guimaraes, 1159 Gelbgjutaregatan Cormano (Milano) E Madrid Porto Linköping, Östergötland Italy Spain Portugal Sweden Telephone: +39 (0) Telephone: Telephone: Telephone: Facsimile: +39 (0) Facsimile: Facsimile: Facsimile: All data subject to change without notice Flowserve Corporation. Flowserve and Kämmer are trademarks of Flowserve Corporation
General Service Valves Series Globe Valves Series Angle Valves Series Way-Valves
General Service Valves Series 035000 Globe Valves Series 031000 ngle Valves Series 033000 3-Way-Valves Description Kämmer s series 035000/031000/033000 is a competitive line of general service control
More informationActuator size P2 P3 P4 P5 Diaphragm area cm Thrust max. dan Stroke mm
Pneumatic s Series 2, Types P2, P3,, Description Standard linear actuators for control valves: Standard actuator made from stainless steel Air supply up to 6 bar Multi-spring design Reversible Top handwheel
More informationKämmer Series Corrosive Application Valves
Kämmer Corrosive Application Valves 1 Introduction Optional test port NPT ¼" Anti-blowout stem design Guided stem PN 16 modified PTFE bellows seal,as standard configuration Metal to metal body/bonnet connection
More informationFlow Control Division
Flow Control Division Kämmer Valves Product Profile Kämmer manufactures a complete line of automatic control valves for special applications. This bulletin briefly describes each product. There is a detailed
More informationFlow Control Division. Kammer Control Valves. Kämmer Series Corrosive Application Valves
Flow Control Division Kämmer Corrosive Application Valves 1 Introduction Optional test port NPT 1 / 4 Anti-blowout stem design Guided stem PN 16 modified PTFE bellows seal,as standard configuration Metal
More informationEDELSTAHL a. Flow Control Division. Kammer Control Valves. Kämmer Series Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL a Aseptic and Sanitary Valves 1 In many of today s clinical laboratories or biotech pilot plants, valves and related equipment are manually cleaned with a caustic solution, flushed and sterilized
More informationKämmer Series Split Body Valves
flowserve.com Kämmer Series 020000 Split Body s Description Kämmer Series 020000 are split body style valves manufactured from forged material. This engineering design easily adapts to meet application
More informationSplit Body Valves. Installation, Operation, Maintenance Instructions. Series / Angle Valves. Flow Control Division
Installation, Operation, Maintenance Instructions Split Body Valves Series 011000 / 015 000 Angle Valves 1 USING KÄMMER VALVES AND ACTUATORS CORRECTLY 1.1 General The following instructions are designed
More informationSplit Body Valves Series Globe Valve Series Angle Valve Series Way Valve
Split Body Valves Series 020000 Globe Valve Series 021000 Angle Valve Series 023000 3-Way Valve Description Kämmer Series 020000 are split body style valves manufactured from forged material. This engineering
More informationSchmidt Armaturen FlowPak TM PN 10 / 40, DN
Schmidt Armaturen FlowPak TM PN /, DN 15 - SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates trouble
More informationKämmer Series Low Flow Valves
flowserve.com Kämmer Series 030000 Low Flow Valves Description Kämmer series 030000 low flow valves are designed for precision controlling up to PN40. The body is a precision casting for high finishing
More informationKämmer Series Low Flow Valve
flowserve.com Kämmer Series 080000 Low Flow Valve Description Kammer series 080000/081000 low flow laboratory valves are designed for precision controlling. The body is manufactured from bar stock stainless
More informationPneumatic Diaphragm On-Off Actuators
Installation, Operation, Maintenance Instructions Pneumatic Diaphragm On-Off Actuators Series, Types: P0, P1 Index 1 Using Kämmer valves and actuators correctly. Unpacking 3 Installation 4 Quick check
More informationTECHNICAL BULLETIN. Segmented V-port Ball Valves. Experience In Motion FCD VLENTB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves FCD VLENTB4152-01 07.09 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
More informationTECHNICAL BULLETIN. Valtek ShearStream SB Control Valves. Segmented V-port Ball Valves. Experience In Motion VLEETB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves VLEETB4152-03 11.02 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
More informationMaxFlo 3 Excentric Rotary Plug Valve
MaxFlo 3 Excentric Rotary Plug Valve Figure 1: MaxFlo 3 Control Valve with Valtek High- Performance Diaphragm Actuator and Logix 500 Digital Positioner Figure 2: Safe, Reliable, Anti-Blowout Shaft System
More informationAutomax SuperNova Series. Pneumatic Rack & Pinion Actuators
Automax SuperNova Series Pneumatic Rack & Pinion Actuators The Flowserve S Series SuperNova pneumatic actuator is the latest development of the previous version, which won worldwide praise for its reliability,
More informationKämmer Multi-Z Severe Service Valves
flowserve.com Käer Multi-Z Severe Service Valves Käer Multi-Z Introduction and cavitation completely under control Users from the power generation, petrochemical and industrial chemicals industries are
More informationActuator P2 P3 P4 P5. Operating medium (supply) Instrument air* (dry and oil-free) Spring steel epoxy resin coated
Pneumatic Actuators Series 2, Types P2, P3, P4, P5 Description Standard linear actuators for control valves: Standard actuator made from stainless steel Air supply up to 6 bar Multi-spring design Reversible
More informationPT 700 Electro-Pneumatic Transducer. Installation Operation Maintenance
PT 700 Electro-Pneumatic Transducer Installation Operation Maintenance 2 Contents 1. General information... 3 1.1 Using... 3 1.2 Terms concerning safety... 3 1.3 Protective clothing... 3 1.4 Qualified
More informationTECHNICAL BULLETIN. Valtek GS. General Service Control Valve FCD VLENTB0300A4 03/14
TECHNICAL BULLETIN Valtek GS General Service Control Valve FCD VLENTB0300A4 03/14 Valtek GS - General Service Control Valve The Valtek GS product line is low cost, compact and light-weight. Yet, it is
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationTECHNICAL BULLETIN. Logix 505si Series Digital Positioner. Experience In Motion FCD LGENTB /13
Logix 505si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0505-03 09/13 Experience In Motion Introduction The Logix 505si is a basic positioner for most simple control loops. It is microprocessor
More informationUSER INSTRUCTIONS. Installation Operation Maintenance. Valtek Torex TX Control and shut-off valves. Butterfly Valves. Experience In Motion
USER INSTRUCTIONS Valtek Torex TX Control and shut-off valves Butterfly Valves VLEEIM4143-02 09.10 Installation Operation Maintenance Experience In Motion Contents SAFETY General 1 Lifting 2 Receiving
More informationTECHNICAL BULLETIN. Valtek GS. General Service Control Valve FCD VLENTB0300AQ 03/13
TECHNICAL BULLETIN Valtek GS General Service Control Valve FCD VLENTB0300AQ 03/13 Valtek GS - General Service Control Valve The Valtek GS product line is low cost, compact and light-weight. Yet, it is
More informationMaxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
More informationflowserve.com Kämmer Multi-Z Kämmer Multi-Z Severe Service Valves
flowserve.com Severe Service Valves 1 Introduction Solids and cavitation completely under control Users from the power generation, petrochemical and industrial chemicals industries are frequently confronted
More informationKämmer Series Multi-Z FCD KMENTB /16 TECHNICAL BULLETIN. Kämmer Multi-Z Severe Service Valves FCD KMENTB /16. Experience In Motion
TECHNICAL BULLETIN Kämmer Multi-Z Severe Service Valves FCD KMENTB1631-05 02/16 Experience In Motion 1 Index Section Page Features... 2 Specifications... 3 Principal design... 4 Principle of cavitation
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationflowserve.com Valtek ShearStream Segmented Ball Valve Series
flowserve.com Valtek ShearStream Segmented Ball Valve Series 1 Valtek ShearStream Effective control for demanding flows. After more than one hundred years of close cooperation with our customers, we at
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationValtek Mark One. Valtek Mark One Control Valves
Valtek Mark One Control Valves Body Assembly Fail-Safe Spring Modular Piston Actuator: Three standard sizes cover most valves. Each is easily reversible. Stiffness, repeatability, low hysteresis. O Heavy
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationValtek Valdisk 150. Valtek Valdisk 150. Control Valves
Valtek Valdisk 50 Control Valves Contol Valves Compact, field reversible actuator Self-centering seat Blowout protection increases safety Available in wafer or lug-style body Blind end also eliminates
More information21000 Series. Masoneilan * Valves. High-Performance Control Valves
GE Energy Masoneilan * Valves 21000 Series High-Performance Control Valves Optimum control performance for a wide range of automated process control applications Single-ported design configuration Advanced
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationMasoneilan * Series
Masoneilan * 41005 Series Heavy Duty, Globe-Style Control Valves Dependable globe-style control valve solutions for maximum performance in severe service conditions bhge.com 41005 Series Cage-Guided Globe
More informationTECHNICAL BULLETIN. Valtek Multi-Z Anti-Cavitation Control Valve. Experience In Motion. Valtek Series Multi-Z FCD VLENTB /10
TECHNICAL BULLETIN Valtek Multi-Z Anti-Cavitation Control Valve FCD VLENTB1631-00 06/10 Experience In Motion 1 Index Section Features... 2 Specifications... 3 Principal design... 4 Principle of cavitation
More informationMasoneilan* Series
Masoneilan* 21000 Series Top-Guided Globe Valve with Lo-dB*/ Anti-cavitation Capabilities Optimum control performance for a wide range of automated process control applications bhge.com 21000 Series Globe
More informationFlowPak TM General Application Valve DN , PN 10 / 40
FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates
More information41005 Series. Masoneilan * Valves. Heavy Duty, Globe-Style Control Valves
GE Energy Masoneilan * Valves 41005 Series Heavy Duty, Globe-Style Control Valves Dependable globe-style control valve solutions for maximum performance in severe service conditions 41005 Series Cage-Guided
More informationValtek Tek-Check Control Valves Valtek Tek-Check
Valtek Tek-Check Control Valves Non-Slam Piston Type Easy disassembly: Removal of bolting, bonnet flange and bonnet provides easy access to piston Interchangeability: Single body used for Class 50, 300
More informationTECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /13
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-02 09/13 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
More information41005 Series Heavy Duty - Severe Service. Putting You In Control Series. Maximum Performance Globe Style Control Valves
Putting You In Control 41005 Series Heavy Duty - Severe Service 41005 Series Maximum Performance Globe Style Control Valves Excellent Performance In Severe Service Conditions 2 Dresser Masoneilan EXPERIENCE,
More informationValtek ShearStream Control Valves
Control Valves Control Valves Compact, field-reversible actuator Lightweight, rugged one-piece body Splined ball-toshaft connection Bi-directional Flex-loc TM seal* ANSI Class IV shutoff metal seal ANSI
More informationType 1a Globe Control Valve
PTFE-lined Type 1a Globe Control Valve Application: PTFE-lined control valve for corrosive media, particularly for severe requirements in chemical applications: Valve sizes DN 25 to 150 or NPS 1 to 6 Pressure
More informationMasoneilan* 215X1 Series Control Valve
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* 215X1 Series Control Valve UOP Lock Hopper Over Travel Control Valves Table of Contents Features...3 General Data...4 Numbering System...5 Temperature
More informationValtek Tek-Check. Check Valves
Valtek Tek-Check Check Valves Non-Slam Piston Type Easy disassembly: Removal of bolting, bonnet flange and bonnet provides easy access to piston Interchangeability: Single body used for Class 150, 300
More informationFLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS
FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS 1 M1 20 Issue 4/99 DESIGN FEATURES Size range DN... 300. For larger sizes, DN 350-400, select series MP, MA, or MT. PN 10, 16, and 40. Pressure
More informationValtek GS The Perfect Balance
Valtek GS The Perfect Balance Optimized control valve value and reliability for general service applications Experience In Motion Valtek GS provides all that is required and more for a high-performance,
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationValtek Valdisk 150. Valtek Valdisk 150. Control Valves. Flowserve Corporation, Valtek Control Products, Tel. USA
Control Valves Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611 1 Control Valves Available in wafer or lug-style body Self-centering seat Blowout protection increases safety Compact,
More informationControl Valve GS 3 series 1/2 up to 10. material
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
More information21000 Series Control Valves. Putting You In Control Series. High Performance Globe Style Control Valves
Putting You In Control 21000 Series Control Valves 21000 Series High Performance Globe Style Control Valves Versatile Reliable High Performance 2 Dresser Masoneilan EXPERIENCE, KNOWLEDGE, TECHNOLOGY. Heavy
More informationControl Valve GS 3 series 1/2 up to 10. Materials
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
More informationFLANGED REDUCED BORE BALL VALVE, SERIES MBV
FLANGED REDUCED BORE BALL VALVE, SERIES MBV 1 MBV 26 Issue 12/98 DESIGN FEATURES Size range 2" 8". ANSI Class 15 and. Pressure classes Tightness Separate ball and shaft assure low pressure tightness even
More informationMaxifluss Rotary Plug Valves VETEC Types 72.3/R and 72.4/R
Maxifluss Rotary Plug Valves VETE Types 72.3/R and 72.4/R Application Double-eccentric control valve for process engineering and industrial applications Nominal sizes DN 25 to 400 NPS 1 to 1 Nominal pressures
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationFlowTop Control Valves
Body Assembly Simple, easy, field retrofitable live loading options available: Minimal additional parts (see Figures 15,17 & 18) Many high quality packing systems available: Including UltraGuard environmental
More informationEDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
More informationPneumatic and Electropneumatic Actuators Series 4, Types 37, 38, 39, 3D and 47, 48, 49, 4D
Installation, Operation, Maintenance Instructions Pneumatic and Electropneumatic Actuators Series 4, Types 7, 8, 9, D and 47, 48, 49, 4D Index 1 Using Kämmer valves and actuators correctly. 2 Unpacking
More informationBalanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationflowserve.com Kämmer SmallFlow Low and Micro Flow Valves
flowserve.com Kämmer SmallFlow Low and Micro Flow Valves 1 Kämmer SmallFlow Valves For Flowserve a low flow valve is a valve with a C v value range between 0.012 and 4.7. Flowserve also manufactures Micro
More informationEvery component precisely matched
Series 200 Every component precisely matched Powerful valve actuator 1 Most commonly used is the electric actuator series SHE as shown here. It is robust, provides a constant seating force and is cost
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationValtek MaxFlo Control Valves
Control Valves Control Valves Rangeability up to 160:1 Hardened Eccentric rotary plug lifts off seat immediately, reducing seat wear Non-crossover shaft provides greater C V Heavy duty ridge metal seat
More informationValtek VL-HC Spring Cylinder Linear Actuators
Valtek VL-HC Spring Cylinder Linear Actuators GENERAL INFORMATION The following instructions are designed to assist in installing, troubleshooting and servicing Valtek VL-HC spring cylinder actuators.
More informationSeries 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationValtek Spring Cylinder Linear Actuators
Valtek Linear Actuators GENERAL INFORMATION The following instructions are designed to assist in installing, troubleshooting and servicing Valtek spring cylinder actuators. Product users and maintenance
More informationMaxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
More informationUSER INSTRUCTIONS. Valtek Control Products Spring Cylinder Linear Actuators. Installation Operation Maintenance. Experience In Motion
USER INSTRUCTIONS Valtek Control Products Linear Actuators FCD VLENIM0002-00-AQ - 10/14 (Replaces VLAIM002) Installation Operation Maintenance Experience In Motion 2 GENERAL INFORMATION The following instructions
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV
FLANGED FULL BORE BALL VALVE, SERIES MBV 1 MBV 25 Issue 4/99 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Pulp & paper production. Liquids. Water. Power plants.
More informationMasoneilan * Series
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service 2 GE Oil & Gas Table of Contents Features...3 Numbering System...4 Ratings/Connections...4
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationControl Valves Series 2000 Heavy Duty valve 2 way
Series 2000 Heavy Duty valve 2 way Technical data Size (DN) DN 15 150 Pressure rating PN16, PN40 ANSI 300 Connections Flanges UNI/DIN PN16, PN40 Flanges ANSI 300 Type sealing Metallic (Class IV - V), soft
More informationPiston Bottom Outlet Valves KOLBENVENTILE. SchuF FETTEROLF
Piston Bottom Outlet Valves KOLBENVENTILE SchuF FETTEROLF SchuF Fetterolf Ram Valves with Customisable Seat Sealing area options - see over Vessel flange - ANSI, DIN or custom Ram body materials - see
More informationNAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(1)GB 08.12 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
More informationSeries 240 Type Gas and Type Gas Automatic Shut-off Valves for Gases (valve class D)
Series 240 Type 3241-1-Gas and Type 3241-7-Gas Automatic Shut-off Valves for Gases (valve class D) DIN-DVGW typetested acc. to DIN EN 161 (2013-04) Application Control valve for control systems subject
More informationMETAL SEATED NELDISC BUTTERFLY VALVES, SERIES L12
METAL SEATED NELDISC BUTTERFLY ALES, SERIES L12 2 L12 20 Issue 4/99 SIZES AND PRESSURE RATINGS Size range DN 80-600, 3" - 24". Pressure ratings PN 10, 16, 25 and ANSI 150. FEATURES Third-generation, metal-to-metal
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More informationInstrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
More informationValtek Valdisk. Valtek Valdisk Control Valves
Control Valves 1 Control Valves Compact, field reversible actuator Jam-lever Toggle soft seal ANSI Class IV shutoff metal seal ANSI Class VI shutoff soft seal Non-selective disc and shaft for reduced cost
More informationBalanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationWorcester 53/54 Series. Reduced Bore Flanged Ball Valves to DIN 3202
Worcester 3/4 Series Reduced Bore Flanged Ball Valves to DIN 3202 General Description Since its introduction to industry, the Series 3/4 ball valve has become a major force in the world of fluid control.
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationFlowserve Spring Diaphragm Rotary Actuators
Flow Control Division Installation, Operation, Maintenance Instructions Flowserve Spring Diaphragm Rotary Actuators TERMS CONCERNING SAFETY The safety terms DANGER, WARNING, CAUTION and NOTE are used in
More informationPneumatic Control Valve Type and Type Micro-flow Valve Type 3510
Pneumatic Control Valve Type 3510-1 and Type 3510-7 Micro-flow Valve Type 3510 ANSI version Application Control valve designed for controlling low flow rates in pilot plants and technical research facilities.
More informationBalanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTECHNICAL BULLETIN. Valtek MaxFlo 4. Eccentric Rotary Plug Control Valve. Experience in Motion FCD VLENTB AQ 11/15
Valtek MaxFlo 4 Eccentric Rotary Control Valve FCD VLENTB0064-02-AQ 11/15 TECHNICAL BULLETIN Experience in Motion Valtek MaxFlo 4 FCD VLENTB0064-02-AQ 10/15 Flowserve Solutions to keep you flowing Flowserve
More informationValtek Survivor Control Valves
Valtek Survivor Control Valves GENERAL INFORMATION The following instructions are to assist in unpacking, installing and performing maintenance as required on Valtek Survivor TM control valves. Product
More informationSeries 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
More informationMasoneilan* Series Varipak
GE Oil & Gas Technical Specifications 10/2016 Masoneilan* 28000 Series Varipak Control Valves Precise Microflow Valves with Compact Design and Flexible Capabilities. GE Classification Data : Public Table
More informationMaxifluss Rotary Plug Valves VETEC Types 73.3/M and 73.7/M
Maxifluss Rotary Plug Valves VETEC Types 7./M and 7.7/M Application Double-eccentric control valve for process engineering, industrial applications, and refineries Nominal sizes DN 25 to 400 1 to 16 Nominal
More informationARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More information