M323F. Technical Specifications. Railroad Wheeled Excavator. Engine. Tires. Drive. Hydraulic System. Swing Mechanism. Weights. Cat C4.

Transcription

1 M323F Railroad Wheeled Excavator Technical Specifications Engine Engine Model Ratings Cat C4.4 ACERT 2,000 rpm Rated Net Power (ISO 24/SAE J134) 112 kw/152 PS Maximum Net Power (ISO 24/SAE J134) 112 kw/152 PS Maximum Gross Power (ISO 1436) 117 kw/15 PS Bore 105 mm Stroke 127 mm Displacement 4.4 L Maximum Torque at 1,400 rpm 710 N m Number of Cylinders In Line 4 Meets EU Stage IV emission standards. Rated speed 2,000 rpm. Net power advertised is the power available at the flywheel when engine is equipped with air cleaner, Cat Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. No deratings required up to 3000 m altitude. Automatic derating occurs after 3000 m. Swing Mechanism Maximum Swing Speed Maximum Swing Torque Weights rpm 42 kn m Operating Weights* kg kg Stick 2100 mm 705 kg Counterweights Standard 6400 kg Optional 7400 kg * Operating weight includes short stick, full fuel tank, operator, no quick coupler, no bucket and dual pneumatic tires. Weight varies based on configuration. Tires Standard (Dual Pneumatic) Drive Maximum Gradeability (22 00 kg) 52.5% Maximum Travel Speed Road Mode 20 km/h Maximum Travel Speed Rail Mode 20 km/h Drawbar Pull Road Mode 104 kn Drawbar Pull Rail Mode 45 kn Hydraulic System Tank Capacity System Maximum Pressure Implement Circuit Normal Heavy Lift Travel Circuit Maximum Pressure Auxiliary Circuit High Pressure Medium Pressure Swing Mechanism Maximum Flow Implement/Travel Circuit Auxiliary Circuit High Pressure Medium Pressure Swing Mechanism 122 L 240 L kpa kpa kpa kpa kpa kpa 240 L/min 240 L/min 4 L/min 80 L/min

2 Service Refill Capacities Fuel Tank Capacity 240 L Cooling System 30 L Engine Crankcase 8 L Rear Axle Housing (differential) 11.2 L Front Steering Axle (differential) L Final Drive 2.4 L Powershift Transmission 2.5 L DEF Tank 1 L Standards Cab/ROPS ISO :2008 Rail Power Train Rail Wheel (UIC profile) Ø632 mm Track Width 1435 mm Park Brake (integrated in motor) Multi-disc Tire Ground Clearance on Rail 15 mm Undercarriage Road Ground Clearance Rail Ground Clearance Maximum Steering Angle Oscillation Axle Angle Minimum Turning Radius: Outside of Tire End of Variable Adjustable Boom Sound Performance 360 mm 15 mm 35 ± mm 7100 mm Operator Sound 2000/14/EC, ISO 636: db(a) Spectator Sound 2000/14/EC, ISO 635:2008 db(a) The operator sound level is measured according to the procedures specified in 2000/14/EC and ISO 636:2008, for a cab offered by Caterpillar, when properly installed, maintained, and tested with the door and windows closed. The external sound level is measured according to the test procedures and conditions specified in 2000/14/EC as amended by 2005/88/EC. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment. Emissions and Safety Engine Emissions Fluids (optional) Hydraulic Oil CAT BIO HYDRAULIC OIL Stage IV Biodiesel up to B20 Diesel Exhaust Fluid Must meet ISO Vibration Levels Maximum Hand/Arm (ISO ) <2.5 m/s² Maximum Whole Body (ISO/TR 2538:2006) <0.5 m/s² Seat Transmissibility Factor (ISO 706:2000-spectral class EM5) <0.7 m/s² Readily biodegradeable EU Flower eco-label certified. Meets EN or ASTM D6751 with EN50 or ASTM D75. Standard mineral diesel fuels 2

3 M323F Railroad Wheeled Excavator Specifications Dimensions All dimensions are approximate and may vary depending on bucket selection Boom Option Stick Option Top of Cab Height: Road Mode Rail Mode Shipping Height: With Boom/Stick Installed Shipping Length: With Boom/Stick Installed Variable Adjustable 2.1 m 3215 mm 3440 mm 332 mm Boom Option Stick Option Upper Frame Width without Walkways Tail Swing Radius Counterweight Clearance: Road Mode Rail Mode Bucket Capacity Variable Adjustable 2.1 m 2533 mm 1566 mm 1306 mm 1501 mm 0.35 m3 0.1 m3 677 mm 3

4 M323F Railroad Wheeled Excavator Specifications Work Mode Dimensions All dimensions are approximate and may vary depending on bucket selection. Work Mode Parallel to Track 1 Swing Center to Stick Pin 2 Overall Height 3 Stick Pin Center to Rail 1 Swing Center to Stick Pin 2 Overall Height 3 Stick Pin Center to Rail Overhead Line Clearance of 320 mm 7628 mm 320 mm 278 mm Overhead Line Clearance of 4280 mm 7514 mm 4280 mm 3503 mm Work Mode Perpendicular to Track 4 Overall Height 5 Stick Pin Center to Rail 6 Swing Center to Stick Pin 4 Overall Height 5 Stick Pin Center to Rail 6 Swing Center to Stick Pin Overhead Line Clearance of 320 mm 320 mm 1163 mm 553 mm Overhead Line Clearance of 4280 mm 4280 mm 1521 mm 5261 mm Work Mode On Rails Traveling Position 320 mm 7 Overall Height 8 Stick Pin Center to Rail Swing Center to Stick Pin 1100 mm 5200 mm 7 8 4

5 Working Ranges m 0 m m m Boom Type Stick Length Digging Height Dump Height Digging Depth Vertical Wall Digging Depth Depth 2.5 m in Straight Clean-Up Reach Reach at Ground Level Bucket Digging Force (ISO 6015) Stick Digging Force (ISO 6015) Variable Adjustable 2100 mm mm 620 mm 5610 mm 4380 mm 5500 mm 110 mm 00 mm 114 kn Range values are calculated with GD bucket 1100 mm, 0.80 m3 with tips K080 and CW-20-H.4.N quick coupler with a tip radius of 1574 mm. Breakout force values are calculated with heavy lift on (no quick coupler) and a cutting edge tip radius of 1237 mm. 84 kn 5

6 Lift Capacities Variable Adjustable Boom Counterweight: 6.4 t Road Mode All values are in kg. Load at maximum reach (stick nose/bucket pin) Load over front Load over rear Load over side Load point height Stick 2100 mm 7500 mm 6000 mm 4500 mm 3000 mm 1500 mm 0 mm 1500 mm 3000 mm 3000 mm 4500 mm 6000 mm 7500 mm TOOL POINT *5350 *5350 *400 *5000 * ALP *550 * *6050 * TOOL POINT *5250 *5250 *4800 *4500 * *4350 * ALP *5400 *5400 *4700 * *5050 * TOOL POINT *8650 *8650 *7750 *500 *500 *4650 * * ALP *7600 *6000 *6000 *4600 * * TOOL POINT *8750 *8750 *7400 * *4550 * * ALP * *4500 * * TOOL POINT * * *7350 * *4500 * * * ALP * *5100 * * TOOL POINT * * * * ALP * * * TOOL POINT * * * ALP * * TOOL POINT * ALP *5150 * mm Lift Capacities Variable Adjustable Boom Counterweight: 7.4 t Road Mode All values are in kg. Load at maximum reach (stick nose/bucket pin) Load over front Load over rear Load over side Load point height Stick 2100 mm 7500 mm 6000 mm 4500 mm 3000 mm 1500 mm 0 mm 1500 mm 3000 mm 3000 mm 4500 mm 6000 mm 7500 mm TOOL POINT *5350 *5350 *400 *5000 *5000 * ALP *550 *550 *550 *6050 *6050 * TOOL POINT *5250 *5250 *4800 *4500 *4500 *3700 *4350 * ALP *5400 *5400 *4700 *5050 * *5050 * TOOL POINT *8650 *8650 *7750 *500 *500 *4650 *4400 *4400 *3800 * ALP *7600 *6000 *6000 *4600 *4550 * * TOOL POINT *8750 *8750 *7400 *6600 *6600 *4550 * * ALP * *4500 * * TOOL POINT * * *7350 * *4500 * * * ALP * *5100 * * TOOL POINT * * * * ALP * * * TOOL POINT * * * ALP * * * TOOL POINT *6100 * ALP *5150 * mm * Limited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/ lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 6

7 Lift Capacities Variable Adjustable Boom Counterweight: 6.4 t Rail Mode Level Track All values are in kg. Stick 2100 mm Load at maximum reach (stick nose/bucket pin) Load over front Load over rear Load over side Load point height 3000 mm 4500 mm 6000 mm 7500 mm 7500 mm S54 + TOOL POINT *5350 * *5000 * S4 + TOOL POINT * * S54 + ALP *550 * *6050 * S4 + ALP mm S54 + TOOL POINT *5250 * *4500 * *4350 * S4 + TOOL POINT * * S54 + ALP *5400 * *5050 * *5050 * S4 + ALP * mm S54 + TOOL POINT *8650 * *500 * *4400 * *4100 * S4 + TOOL POINT * S54 + ALP *6000 * *4550 * *4750 * S4 + ALP mm S54 + TOOL POINT *8750 * *6600 * *4850 * *4150 * S4 + TOOL POINT S54 + ALP *7000 * *450 * *4550 * S4 + ALP mm S54 + TOOL POINT * * *7700 * *5200 * *4300 * *4200 * S4 + TOOL POINT S54 + ALP *600 * *5250 * *4400 * S4 + ALP mm S54 + TOOL POINT * * *7750 * *5600 * *300 * S4 + TOOL POINT S54 + ALP *7650 * *5600 * *4200 * S4 + ALP mm S54 + TOOL POINT *12 50 * *750 * *5350 * * S4 + TOOL POINT * S54 + ALP *7800 * *4450 * * S4 + ALP * S54 + TOOL POINT *6100 * mm S4 + TOOL POINT S54 + ALP *5150 * S4 + ALP * * Limited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/ lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. mm 7

8 Lift Capacities Variable Adjustable Boom Counterweight: 7.4 t Rail Mode Level Track All values are in kg. Stick 2100 mm Load at maximum reach (stick nose/bucket pin) Load over front Load over rear Load over side Load point height 3000 mm 4500 mm 6000 mm 7500 mm 7500 mm S54 + TOOL POINT *5350 * *5000 * S4 + TOOL POINT * * S54 + ALP *550 * *6050 * S4 + ALP mm S54 + TOOL POINT *5250 * *4500 * *4350 * S4 + TOOL POINT * * S54 + ALP *5400 * *5050 * *5050 * S4 + ALP * mm S54 + TOOL POINT *8650 * *500 * *4400 * *4100 * S4 + TOOL POINT * S54 + ALP *6000 * *4550 * *4750 * S4 + ALP mm S54 + TOOL POINT *8750 * *6600 * *4850 * *4150 * S4 + TOOL POINT S54 + ALP *7000 * *450 * *4550 * S4 + ALP mm S54 + TOOL POINT * * *7350 *7700 * *5200 * *4300 * *4200 * S4 + TOOL POINT S54 + ALP *600 * *5250 * *4400 * S4 + ALP mm S54 + TOOL POINT * * *7750 * *5600 * *300 * S4 + TOOL POINT S54 + ALP *7650 * *5600 * *4200 * S4 + ALP mm S54 + TOOL POINT *12 50 * *750 * *5350 * * S4 + TOOL POINT S54 + ALP *7800 * *4450 * * S4 + ALP S54 + TOOL POINT *6100 * mm S4 + TOOL POINT S54 + ALP *5150 * S4 + ALP * * Limited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/ lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. mm 8

9 Lift Capacities Variable Adjustable Boom Counterweight: 6.4 t Rail Mode 200 mm Cant All values are in kg. Stick 2100 mm Load at maximum reach (stick nose/bucket pin) Load over front Load over rear Load over side Load point height 3000 mm 4500 mm 6000 mm 7500 mm 7500 mm S54 + TOOL POINT *5350 * *5000 * S4 + TOOL POINT S54 + ALP *550 * *6050 * S4 + ALP mm S54 + TOOL POINT *5250 * *4500 * *4350 * S4 + TOOL POINT S54 + ALP *5400 * *5050 * *5050 * S4 + ALP mm S54 + TOOL POINT *8650 *8650 *500 * *4400 * *4100 * S4 + TOOL POINT S54 + ALP *6000 * *4550 * *4750 * S4 + ALP mm S54 + TOOL POINT *8750 *8750 *6600 * *4850 * *4150 * S4 + TOOL POINT S54 + ALP *7000 * *450 * *4550 * S4 + ALP mm S54 + TOOL POINT * * *7700 * *5200 * *4300 * *4200 * S4 + TOOL POINT S54 + ALP *600 * *5250 * *4400 * S4 + ALP mm S54 + TOOL POINT * * *7750 * *5600 * *300 * S4 + TOOL POINT S54 + ALP *7650 * *5600 * *4200 * S4 + ALP mm S54 + TOOL POINT *12 50 * *750 * *5350 * * S4 + TOOL POINT S54 + ALP *7800 * *4450 * * S4 + ALP * S54 + TOOL POINT *6100 * mm S4 + TOOL POINT S54 + ALP *5150 * S4 + ALP * * Limited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/ lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. mm

10 Lift Capacities Variable Adjustable Boom Counterweight: 7.4 t Rail Mode 200 mm Cant All values are in kg. Stick 2100 mm Load at maximum reach (stick nose/bucket pin) Load over front Load over rear Load over side Load point height 3000 mm 4500 mm 6000 mm 7500 mm 7500 mm S54 + TOOL POINT *5350 * *5000 * S4 + TOOL POINT S54 + ALP *550 * *6050 * S4 + ALP mm S54 + TOOL POINT *5250 * *4500 * *4350 * S4 + TOOL POINT S54 + ALP *5400 * *5050 * *5050 * S4 + ALP mm S54 + TOOL POINT *8650 *8650 *500 * *4400 * *4100 * S4 + TOOL POINT S54 + ALP *6000 * *4550 * *4750 * S4 + ALP mm S54 + TOOL POINT *8750 *8750 *6600 * *4850 * *4150 * S4 + TOOL POINT S54 + ALP *7000 * *450 * *4550 * S4 + ALP mm S54 + TOOL POINT * * *7700 * *5200 * *4300 * *4200 * S4 + TOOL POINT S54 + ALP *600 * *5250 * *4400 * S4 + ALP mm S54 + TOOL POINT * * *7750 * *5600 * *300 * S4 + TOOL POINT S54 + ALP *7650 * *5600 * *4200 * S4 + ALP mm S54 + TOOL POINT *12 50 * *750 * *5350 * * S4 + TOOL POINT S54 + ALP *7800 * *4450 * * S4 + ALP * S54 + TOOL POINT *6100 * mm S4 + TOOL POINT S54 + ALP *5150 * S4 + ALP * * Limited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/ lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. mm 10

11 Bucket Specifications and Compatibility Variable Adjustable Boom 2100 mm Stick Road Rail without Cant Width Capacity Weight Fill Counterweight Counterweight mm m3 kg % 6.4 t 7.4 t 6.4 t 7.4 t Without Quick Coupler General Duty (GD) % % % Maximum load with pin-on (payload + bucket) kg With Pin Grabber Quick Coupler General Duty (GD) % % % Maximum load with pin-on (payload + bucket coupler) kg With Quick Coupler (CW/CWs) Ditch Cleaning (DC) General Duty (GD) Heavy Duty (HD) With TR14 (Tilt Rotator) % X % X X % % % % % Maximum load with coupler (payload + bucket coupler) 100% kg General Duty (GD) % % % % % % % X Maximum load with coupler (payload + bucket coupler) kg Capacity based on ISO 7451:2007. Bucket weight with General Duty tips. Bucket recommendation based on S54 rail type. Bucket recommendation based on no rail Cant. Specialized work tools are available. Please contact your dealer for further information. Maximum Material Density: 2100 kg/m kg/m kg/m kg/m3 00 kg/m3 X Not Recommended (stability) Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick. 11

12 Attachments Offering Guide* PIN-ON ATTACHMENTS Counterweight 6.4 t 7.4 t Boom Type Stick Length Variable Adjustable Hydraulic Hammers H110Es 2.10 m H115Es H120Es Demolition and Sorting Grapples G310B D/R G310 GC G313 GC Compactors (Vibratory Plate) CVP75 Tilt Rotators TRS14-Pin-On/S60 Pin Grabber Couplers TRS14-Pin-On/CW Cat PG Dedicated Quick Couplers CW-20 These couplers are available for the M323F. CAT PIN GRABBER COUPLER ATTACHMENTS CW-20s Counterweight 6.4 t 7.4 t Boom Type Stick Length Variable Adjustable Hydraulic Hammers H110Es 2.10 m H115Es Compactors (Vibratory Plate) CVP75 CW-20 COUPLER ATTACHMENTS Counterweight 6.4 t 7.4 t Boom Type Variable Adjustable Stick Length 2.10 m Hydraulic Hammers H110Es H115Es Compactors (Vibratory Plate) CVP75 CW-20s COUPLER ATTACHMENTS Counterweight 6.4 t 7.4 t Boom Type Variable Adjustable Stick Length 2.10 m Hydraulic Hammers H110Es H115Es Compactors (Vibratory Plate) CVP75 *Offerings not available in all areas. Matches are dependent on Wheeled Excavator configurations. Consult your Cat dealer to determine what is offered in your area and for proper work tool match. D Demolition shells. R Recycling shells. Attachment recommendation based on S54 rail type. Attachment recommendation based on no rail Cant. Specialized work tools are available. Please contact your dealer for further information. 12

13 M323F Standard and Optional Equipment Standard and Optional Equipment Standard and optional equipment may vary. Consult your Cat dealer for details. Standard Optional UNDERCARRIAGE AND STRUCTURES Rail wheels insulated according to local regulations Road and rail all-wheel drive 6.4 t counterweight 7.4 t counterweight Two speed hydrostatic transmission on road or rail Independent rail hydrostatic transmission, one motor per rail axle Automatic rail axle lock Automatic lock mode for oscillating front road axle and service brake Heavy-duty rail axles with advanced disc brake system and travel motor with adjustable braking force Travel restraint bracket for clamshell/grapple Towing bar Left- and right-side steps One or two additional tool boxes at undercarriage steps Trailer coupling unit with manual or automatic lock Roading package Standard Optional HYDRAULIC SYSTEM Adjustable hydraulic sensitivity One medium pressure circuit Two medium pressure circuits Auxiliary hydraulic selection button, controlled through left console lever Dedicated swing pump Load sensing hydraulic system Programmable flow and pressure for up to 10 attachments Auxiliary circuit pedal Biodegradable hydraulic oil Bio oil micro-filtration unit High pressure circuit control valve Heavy lift mode Medium pressure auxiliary boom lines High pressure auxiliary boom lines SAFETY AND SECURITY Emergency stop button Backup electro-hydraulic pump for rail emergencies Safety decals for rail certification Pneumatic system for rail trailer or rail car brakes Rear and right-side cameras ROPS operator and secondary cab Stick lowering control valve (SLCV) and boom lowering control valve (BLCV) including overload warning device Pin code engine start prevention Variable Adjustable (VA) boom includes foreboom lowering control valve (FLCV) Automatic swing brake Emergency kit Emergency coupling unit (continued on next page) 13

14 M323F Standard and Optional Equipment Standard and Optional Equipment (continued) Standard and optional equipment may vary. Consult your Cat dealer for details. Standard Optional Standard Optional BOOM AND STICK PRIMARY CAB 5.2 m VA boom, 2.1 m stick Bolt-on falling object guard system SERVICE AND MAINTENANCE (FOGS) capability Ground-level fuel and engine oil filters FM radio with speakers and fluid taps High resolution, full graphic and Centralized lubrication for color instrument panel display undercarriage and rail bogies Pilot operated joysticks Auto-lubricating system Air conditioner, heater, and defroster ENGINE 24V lighter Cat C4.4 ACERT, Stage IV engine Bottle holder Altitude 3000 m capability without de-rate Top and bottom mounted, intermittent, parallel wiper and washer Electric fuel priming pump Washable floor mat with Automatic starting aid storage compartment ELECTRICAL SYSTEM Interior lighting with door switch 100 A alternator Tiltable left side console with lock-out for all controls Main shut-off switch Steering lock device 12V 10 A power supply in primary and secondary cab Adjustable steering column Two front and two rear roading lights Windshield and skylight sunshade Right side, VA boom, and stick flood lights Adjustable travel alarm Cruise control system LCD screens for hydrostatic deceleration power and rail trailer brake pressure Refueling pump Road/rail mode button and signal International Union of Railways (UIC) certified rail lights On/off-tracking control Joystick for hydrostatic deceleration Electric and pneumatic signal/ Power and rail trailer brakes control warning horn SECONDARY CAB 24V 10 A power supply at stick end Retractable seat belt Back door and openable roof for maintenance access to top part of the upper frame Rear window emergency exit Backup electric horn Warning beacon control Support parts for rail safety devices Main machine power switch 14

15 For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at AEXQ2372 ( ) (France, Germany) 2018 Caterpillar All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.