Definite Purpose Contactors Types DP, DPA, and SYD Class 8910

Transcription

1 s DP, DPA, and SYD Class 89 Compact Design Industry Standard Mounting Double Brea Contacts Low Coil VA Straight-Through Wiring Low Cost Definite purpose contactors are ideal for heating, air conditioning, refrigeration, data processing, and food service equipment. New compact and -Pole contactors are available along with standard size,, and -Pole devices. They feature quic connect terminals and binder head screws for easy wiring. Box lugs are standard on 0 ampere contactors and larger. An exclusive DIN trac mounting option may reduce installation costs. Coils can be changed on the DPA contactors quicly without a tool. Auxiliary contact modules snap on either side of the DPA contactors. Compact -Pole Contactors Vac Maximum Loced Rotor 77 V 60 V 7 V Resistive V 0 V DPt $ DPt DPt j DPt.00 Compact -Pole Contactors Vac Maximumc DPV0 -Pole DPV0 -Pole Loced Rotor 77 V 60 V 7 V Resistive,, and -Pole Contactors Vac Maximumc V 0 V j 0 A Res. limited to 77 V. All others rated 0 A Res. (above 77 V). c Above 0 volts, all lines must be switched. t code must be specified to order this product. Refer to standard voltage codes listed below DPt $ DPt DPt DPt 6.00 Loced Rotor 0 V 60 V 7 V Resistance V 0 V 0 V Ø 60/7 V Ø DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPAt DPA6t DPA6t DPA7t DPA7t DPA9t DPA9t DPAt DPAt $ SYD8t SYD0t SYD68t 6.00 Coil Codes DPAV0 -Pole 60 Hz 0 Hz Code DP, DPA V V0 V0 V06 V07f q V 0 Hz only. p Available on s DPA, DPA, and SYD8 only. Not available for DP through DP single-pole devices. f Not available for DP one- and two-pole devices. Code DPA, DPA, SYD Vq V0p V0 V08 V0 V0 V06 V07 For additional information, reference Catalog # 89CT90R6/97 or D-FAX # 7. /00 CP Discount Schedule 000 Square D -8 Courtesy of Steven Engineering, Inc.! 0 Ryan Way, South San Francisco, CA ! Main Office: (60) ! Outside Local Area: (0) 8-900!

2 s DP, DPA, and SYD Application Data Class 89 Normally Open & Normally Closed -Pole Contactors Vac Maximum Resistive N.C. Class 89 c Form 0 DPAp Y9 $.00 DPAp Y DPAp Y DPAp Y9.00 p code must be specified to order this product. Refer to standard voltage codes listed below. c Above 0 volts, all lines must be switched. NOTE: N.C. poles on outside. N.C. poles open before poles close. Auxiliary Contacts For Use With Class 89 DPA DPA DPA SYD NEMA General Purpose Enclosures for DP and DPA Contactors Application Data Contact Arrangement N.C. & N.C. N.C. & N.C. Class 9999 D D0 D D0 SX6 SX7 SX8 $ Class 89 Class 999 DP 0-0 & DPG $. DPA 0-0 & DPG. DPA & DPG.0 DPA 60-7 & DPG 6.00 DPA 90- & DPG 7.00 DPA & DPG DPA 0 & DPG Mechanical Life: Electrical Life: DP DPA, SYD Duty Cycle: Approvals: UL Component Recognized UL Listed (Form U) CSA Certified DPA is CE mared Coil Replacement 00,000 operations 0,000 operations 00,000 operations Continuous File E0, CCN NLDX File E0, CCN NLDX File LR90, Class Class 89 DPA Replacement Coils Class 9998 Volt u Inrush Sealed f 0-0 A & DAt 6 6 $ A DAt A & DAt A & DAt 9.00 t Replace asteris with suffix from DPA Coil Table, shown below. Example: Coil for Class 89 DPAV0 volt 60 Hz would be a Class 9998 DAV0. u For s DP thru DP: Inrush 0 VA; Sealed VA. f CP Discount Schedule, not CP. See page -8 for SYD Replacement Coils. DPA Coil Table Terminals, 60 Hz q Available for DPA contactors only. 0-0 A 0 A 0-60 A 7-90 A A A 0 A A j Solid or stranded copper wire only. Miscellaneous Parts, 0 Hz Code V V0 V0 V06q V07q Power Terminals of Lug Wire Sizesj Minimum-Maximum Binder Head #-#8 #-#6 #-# #-#I/O #-#I/O #8-0 MCM #8-0 MCM #-00 MCM Description Class 9999 DIN mounting bracet attachment (DPA 0 A to 60 A only) DMB $ 7.0 DP Series B Cover DPC.00 Factory Modifications Auxiliary contacts can be factory installed along with a DIN mounting bracet option. Special terminations are also available. Modification Form Factory installed auxiliary contacts Pressure wire connectors (0-0 amp) Y $.60 per pole Box lugs (0-0 amp) Y $.0 per pole DIN mounting bracet attached ( mm style)c Y $.0 for DP $8.0 for DPA Contact cover for DP Series B Y8 $.00 Contact your nearest Square D/Schneider Electric sales office. c Available for 0 through 60 amp only. Contactor Bottom Tabs Top Hoos No tools required See page - for replacement contacts. Operating Tab Auxiliary Contact Installation For additional information, reference Catalog # 89CT90R6/97 or D-FAX # Square D CP fcp Discount Schedule /00 Courtesy of Steven Engineering, Inc.! 0 Ryan Way, South San Francisco, CA ! Main Office: (60) ! Outside Local Area: (0) 8-900!

3 s DP, DPA and SYD Approximate Dimensions Class () # or M DP -Pole 0 thru 0 Amps () # or M DP -Pole 0 thru 0 Amps () # or M () # or M DPA and -Pole 0 thru 0 Amps DPA -Pole 0 thru 0 Amps () # or M DPA and -Pole 0 and 60 Amps # or M DPA and -Pole 7 and 90 Amps.7.9 For additional information, reference Catalog # 89CT90R6/97 or D-FAX # 7. / Square D -8 Courtesy of Steven Engineering, Inc.! 0 Ryan Way, South San Francisco, CA ! Main Office: (60) ! Outside Local Area: (0) 8-900!

4 s DP, DPA and SYD Approximate Dimensions Class Provision for /" DPA Provision for /6" SYD T T T Provision for /" SYD Provision for /" SYD8 For additional information, reference Catalog # 89CT90R6/97 or D-FAX # Square D -8 /00 Courtesy of Steven Engineering, Inc.! 0 Ryan Way, South San Francisco, CA ! Main Office: (60) ! Outside Local Area: (0) 8-900!

5 Definite Purpose Starters s DPS and H through M Class 89 DPSOV0 No. of Compact -Pole Single -Pole Single -Pole Poly DPSGV0 V 7 / Class 89 definite purpose starters are inexpensive starters for applications with relatively low duty cycles. Typical applications include air compressors, agricultural equipment, pumps, and HVAC equipment. Definite purpose starters offer: Low Cost Small Size Melting Alloy Overload Bloc Bi-metallic Overload Available - and -Pole Starters Vac Maximum Trip Free Reset Mechanism Open or Enclosed 00,000 Mechanical Operations Loced Rotor Open NEMA Enclosed No. of 0 V 0 V 60/7 V Thermal Ø Ø 0 V 60 V 7 V f q f q Unitsq 7 / 7 / 7 / / DSOt DSOt DSOt DPSOt DPSOt DPSOt DPSOt DPSOt DPSOt DPSOt DPSOt DPSOt DPSOt DPSO6t DPSO7t DPSO9t $ DSGt DSGt DSGt DPSGt DPSGt DPSGt DPSGt DPSGt DPSGt DPSGt DPSGt DPSGt DPSGt DPSG6t DPSG7t DPSG9t $ q s do not include thermal units. Standard trip thermal units are priced at $9.0 each. See page -9 for selection information. f Holding circuit contacts are not provided as standard; refer to table below for it. t code must be specified to order this product. Refer to standard voltage codes listed below. Approximate Dimensions Reset () # or M DPSO and -Pole and DSO 0-0 Amps Reset..88 DPSG and -Pole 0-0 Amps See page - for replacement contacts. Cross Reference Existing/Replacement Class 89 Existing Device HO HG JO JG KO KG KO KG LO LG MO MG MO MG DPS -Pole starter not available. Suggest -Pole device with auxiliary contact. Miscellaneous Parts and Kits Replacement Device DPSO DPSG DPSO DPSG DPSO DPSG DPSO DPSG DPSO DPSG Description Class & Start-Stop push button itfa Hand-Off-Auto selector switch itf Standard N.C. overload relay contact N.C. and isolated overload relay alarm contacts Overload relay jumper strap 89 DPB 89 DSS 9998 SO 9999 SO 9998 SO $ f Use for 0 to 0 amp starters; for larger sizes, contact your nearest Square D/Schneider Electric sales office. a Does not include holding circuit interloc order auxiliary contact. Ratings Overload Contacts and Auxiliary Contacts Device 9998 SO 9999 SO 9999 R0 & R 9999 D, D0, D & D0 Volts AC Class 89 Replacement Coils Class Volt 9998 Inrush Sealed j 0-0 A & DAt 6 6 $ A & DAt A & DAt 9.00 j CP Discount Schedule, not CP. t Replace asteris with Code from the Coil Table shown below. Coil Table, 60 Hz , 0 Hz Auxiliary Contacts For DPS Startersc Description Class 9999 N.C. / N.C. D D0 D D0 c Auxiliary contacts are available factory installed. Consult local Square D Field Sales Office. $ Pilot Duty AC Only (% Power Factor) Continuous Current Rating Mae Carry & Brea or Less 0 amps amps amps - VA 60 VA amps Code For additional information, reference Catalog # 89CT90R6/97 or D-FAX # 8. V V0 V0 V06 V07 /00 CP jcp Discount Schedule 000 Square D -8 Courtesy of Steven Engineering, Inc.! 0 Ryan Way, South San Francisco, CA ! Main Office: (60) ! Outside Local Area: (0) 8-900!