Task meeting TECHNICAL FEATURES

Transcription

1 Task meeting TECHNICL FETURES 04/2014

2 LOGOS Head piece aluminium injected 19 or 30 mm melamine Steel pillar 80 x 40 x 2 mm Levellers F25 19 or 30 mm melamine Leg frame 50 x 50 x 2 mm square tube Levellers 2 Cubo TECHNICL FETURES Forma 5

3 M10 30 mm melamine Levellers Leg frame 50 x 30 x 2 mm tube semi-oval V30 30 mm melamine Levellers Leg frame 60 x 30 x 2 mm steel tube cut and welded Forma 5 TECHNICL FETURES Cubo 3

4 TRVEL 30 mm melamine Leg double pillar Leg star-shape NTURE 19 mm melamine or glass eams cold laminated profile Levellers Leg frame almost triangular cold laminated 4 Cubo TECHNICL FETURES Forma 5

5 CHIC 19 mm melamine Framework 40 x 10 x 1,5 mm steel Levellers or casters Leg steel rectangular tube 60 x 30 x 2 mm CROSS LEG 30 mm melamine Supports polyamide Leg 30 mm melamine Forma 5 TECHNICL FETURES Cubo 5

6 METL LEG 30 mm melamine Tube Ø 11,4 cm steel Sheet steel ase Ø 60 cm steel Levellers polypropylene 6 Cubo TECHNICL FETURES Forma 5

7 ELEMENTS DESCRIPTION TOPS 19 o 30 mm thick melamine particle board. Rectangular or rounded corner shape. 2 mm thick thermofused edges around the perimeter. Drilled underneath side to allow the assembly. The quality requirements for the board are made according to the UNE-EN 312 legal terms, corresponding to P2 board. The average 30 mm thick board density is 610 kg/m3. The average 19 mm thick board density is 630 kg/m3. 19 mm. 30 mm. LOGOS LEG Troncopyramidal shape injected aluminium head. 80 x 40 mm trapezoidal shape cold laminated steel pillar. Polypropylene glides and levellers. 100 micron epoxy powder paint. Logos leg frame F25 LEG FRME 50 x 50 x 2 mm square steel tubes. 100 micron epoxy powder paint. Legs meet cross bar in a 45º angle joint. Floor support with levellers to keep the table surface straight. Optional height levellers. F25 leg frame M10 LEG FRME 60 x 30 x 2 mm thick semi-oval tube. 100 micron off-white or dark grey epoxy paint. Legs meet crossbar with a 45º angle. The leg frame has a trestle shape. Polypropylene levellers and optional height adjustment. M10 leg frame V30 LEG FRME 60 x 30 x 2 mm steel tube, cut and welded together in a 45º angle, forming a rectangle. 60 x 30 x 2 mm beam as table top support. 100 micron epoxy podwer paint. V30 leg frame TRVEL LEG FRME 2 polypropylene levellers as floor suppoort with inverted T shape. 2 types of leg frames available for meeting tables: mm double pillar leg for meeting tables. Inverted T shape, with an injected aluminium base and 4 mm average thick whick support an extruded aluminium pillar with trapezoidal 2,5 mm thick section. 100 micron epoxy paint finish. This pillar has an empty interior for the vertical cable management. n extruded plastic coverage hides the interior of the pillar and the cables installed. - Star shape leg formed by a trilobular shape injected aluminium base with 3 branches and polypropylene levellers. The base holds a 3 mm thick and Ø 110 mm cylindric extruded aluminium pillar. 100 micron epoxy paint finish. The pillar also includes a 5 mm thick square shape steel plate to support the top. Double pillar leg. Star shape leg. Forma 5 TECHNICL FETURES Cubo 7

8 ELEMENTS DESCRIPTION NTURE LEG FRMES Semi-triangular section cold laminated frame beams and leg frames. 100 micron epoxy paint finish. luminium injected piece for heads. S injection piece as trim. There are simple and linking leg frames. The last ones decrease the visual weight of the set, optimizing the space and facilitating the use of elements. Nature leg frame CHIC LEGS 60 x 30 x 1,5 mm rectangular laminated cold tube. Finish textured silver grey, polymerized at 220ºC. 100 micron epoxy paint finish. Optional levellers or casters with locks. The legs are fixed to the table top by the framework. The packing unit includes two legs and the appropriate fittings. Leveller Chic Caster Chic CROSS LEG Ø 114 mm cold laminated steel tube. 100 micron epoxy paint finish. 300 x 300 x 5 mm steel piece placed in the upper part of the tube to fix the top. Ø 600 mm circular support base. Eight 5 mm thick glides as floor support. Cross leg METL LEG Two 30 mm thick melamine particle boards. 100 micron epoxy paint finish. Rectangular shape. 2 mm thick thermofused edges at the front and 0,5 mm thick edges at the upper and lower sides. Polyamide floor support. Metal leg 8 Cubo TECHNICL FETURES Forma 5

9 OVERVIEWS ND DIMENSIONS LOGOS ROUNDED CORNERS SQURE TLE 19 mm top 110 x 110 x 72,4 SQURE TLE 110 x 110 x 73,5 110 x 110 x 73,5 RECTNGULR TLE 19 mm top 160 x 120 x 72,4 RECTNGULR TLE 240 x 120 x 73,5 200 x 120 x 73,5 160 x 120 x 73,5 RECTNGULR DD-ON TLE 19 mm top 160 x 120 x 72,4 RECTNGULR DD-ON TLE 160 x 120 x 73,5 F25 RECTNGULR TLE 19 mm top 240 x 114 x x 114 x X 162 X X 162 X 74 RECTNGULR TLE 180 x 162 x 75,1 160 x 162 x 75,1 180 X 162 X 75,1 160 X 162 X 75,1 DD-ON RECTNGULR TLE 19 mm top 240 x 114 x x 114 x X 162 X X 162 X 74 DD-ON RECTNGULR TLE 180 x 162 x 75,1 160 x 162 x 75,1 180 X 162 X 75,1 160 X 162 X 75,1 Forma 5 TECHNICL FETURES Cubo 9

10 OVERVIEWS ND DIMENSIONS M10 Ø ROUND TLE Ø x h 110 x 74 SQURE TLE WITH ROUNDED CORNERS 120 x 120 x 74 RECTNGULR TLE WITH ROUNDED CORNERS 240 x 120 x x 120 x 74 RECTNGULR TLE 200 x 166 x x 166 x x 166 x 74 RECTNGULR DD-ON TLE 200 x 166 x x 166 x x 166 x 74 V30 SQURE TLE WITH ROUNDED CORNERS 120 x 120 RECTNGULR TLE WITH ROUNDED CORNERS 240 x 120 x x 120 x 74 RECTNGULR TLE 200 x 166 x x 166 x x 166 x 74 RECTNGULR DD-ON TLE 200 x 166 x x 166 x x 166 x Cubo TECHNICL FETURES Forma 5

11 OVERVIEWS ND DIMENSIONS TRVEL RECTNGULR TLE - DOULE LEG 240 x 140 x 74,7 200 x 140 x 74,7 160 x 140 x 74,7 OVL TLE - DOULE LEG 240 x 140 x 74,7 200 x 140 x 74,7 160 x 140 x 74,7 RREL TLE - DOULE LEG 240 x 140 x 74,7 200 x 140 x 74,7 160 x 140 x 74,7 RECTNGULR TLE - STR LEG 240 x 125 x 74,7 240 x 110 x 74,7 OVL TLE - STR LEG 240 x 125 x 74,7 240 x 110 x 74,7 RREL TLE - STR LEG 240 x 125 x 74,7 240 x 110 x 74,7 ROUND TLE - STR LEG Ø x h 125 x 74,7 110 x 74,7 NTURE Ø ROUND TLE Ø x h 112 x 73,5 RECTNGULR TLE - 3 leg frames 240 x 112 x 73,5 200 x 112 x 73,5 RECTNGULR TLE - 2 leg frames 150 x 112 x 73,5 Forma 5 TECHNICL FETURES Cubo 11

12 OVERVIEWS ND DIMENSIONS CHIC ROUND TLE Tapa 30 mm 110 x 110 x 73 SQURE TLE Tapa 30 mm 114 x 140 x 73 CROSS LEG Ø ROUND TLE Ø x h 110 x x 74 RREL TLE 200 x 110 x x 110 x 74 OVL TLE - ONE TLE 200 x 110 x x 110 x 74 OVL TLE - TWO TLES 300 x 110 x x 110 x x 110 x x 110 x 74 RECTNGULR TLE - ONE TLE 200 x 110 x x 110 x 74 RECTNGULR TLE - DEUX TLES 300 x 110 x x 110 x x 110 x x 110 x Cubo TECHNICL FETURES Forma 5

13 OVERVIEWS ND DIMENSIONS METL LEG Ø ROUND TLE Ø x h 90 x x X 74 RREL TLE 200 x 110 x x 110 x 74 OVL TLE - ONE TLE 200 x 110 x x 110 x 74 OVL TLE - TWO TLES 300 x 110 x x 110 x x 110 x x 110 x 74 RECTNGULR TLE - ONE TLE 200 x 110 x x 110 x 74 RECTNGULR TLE - DEUX TLES 300 x 110 x x 110 x x 110 x x 110 x 74 Forma 5 TECHNICL FETURES Cubo 13

14 MINTENNCE ND CLENING GUIDE MELMINE PIECES METL PIECES Rub the dirty spots with a wet cloth with PH neutral soap. 1 Rub the dirty spots with a wet cloth with PH neutral soap. PLSTIC PIECES Rub the dirty spots with a wet cloth with PH neutral soap. 2 Polished aluminium pieces can have their polish bak by covering and rubbing them with a dry cottom cloth. Do not use abrasive products in any case. LOGOS - Developed by TNDEM COMPNY F25 - Developed by TNDEM COMPNY M10 - Developed by MRIO RUIZ V30 - Developed by JOSEP LLUSCÁ TRVEL - Developed by ITO DESIGN NTURE - Developed by TNDEM COMPNY CHIC - Developed by R&D FORM 5 PIÈTEMENT CROIX - Developed by R&D FORM 5 PIÈTEMENT MÉTLLIQUE - Developed by R&D FORM 5 14 Cubo TECHNICL FETURES Forma 5