Catalog No. CC103. Power Belt Conveyors. Skatewheel Conveyors. Roller Conveyors. Replacement Rollers. Supports. Telescoping Conveyors.

Transcription

1 Power Belt Skatewheel Replacement s Supports Telescoping Ball Tables Catalog No. CC103 Accessories

2 THIS PAGE INTENTIONALLY LEFT BLANK 2

3 Ashland Conveyor Products has been producing quality conveyors for over 35 years, and under the current ownership since In 1999, we moved into a custom designed "conveyor" manufacturing facility in Ashland, Ohio. We offer a standard line of gravity roller, skatewheel, telescoping, powered belt conveyors, and ball transfer, along with a complete selection of stands and accessories. At Ashland Conveyor Products we pride ourselves in producing custom conveyor products and application solutions. The Custom Solutions section, in the back of the catalog, highlights examples of how we have developed products to provide "key" material handling solutions for a number of major retailers, automobile manufacturers and distribution facilities. The goal of Ashland Conveyor Products is to provide our customers with products and solutions that exhibit the highest quality, dependability, and value. Shipping All weights in this catalog are conveyor weights only and do not include accessories, crating, or other packaging materials. All orders will be shipped "dock to dock" F.O.B. Ashland, Ohio Shipping Classifications: Delivery Items in highlighted in this catalog indicate quick ship products. These products normally ship in 13 days. Warranty All Ashland Conveyor Products carry a 1 year limited warranty. Conveyor Sections771/2 Conveyor s (stands, rollers, etc.)65 Telescoping Conveyor100 Power 100 3

4 TABLE OF CONTENTS 3 13/ Dia. x Ga. with 5/1 Hex Axle Model CFG...48 General Information / Dia. x Ga. with 7/1 Hex Axle Model CG...49 BELT Slider Bed Model SB " Dia. x Ga. with 7/1 Hex Axle Model K...49 Slider Bed Model SB " Dia. x Ga. with 7/1 Hex Axle Model KG...50 Bed Model RB " Dia. x Ga. with 7/1 Hex Axle Model KA...50 Slider Bed Incline Model SBI " Dia. x 12 Ga. with 7/1 Hex Axle Model DG...51 Bed Incline Model RBI " Dia. x 9 Ga. with 7/1 Hex Axle Model KD...51 Incline Lift Chart /2" Dia. x 14 Ga. with 7/1 Hex Axle Model U...52 Optional Equipment PopOut Brackets /2" Dia. x 11 Ga. with 11/1 Hex Axle Model S...52 Optional Equipment Power Feeder... 21/2" Dia. x 11 Ga. with 11/1 Hex Axle Model SG...53 GRAVITY SKATEWHEEL 17 25/ Dia. x 7 Ga. with 11/1 Hex Axle Model T General Information...17 SUPPORTS Patterns & Replacement s...18 Tripod Model DT...54 Straight Sections...19 Light Duty HStand Model H Curve Sections...20 Medium Duty HStand Model H...56 Spur Sections...20 Heavy Duty HStand Model H Flow Rails Models FR1, FR2, FR3, FR Multitier Model HMT...58 GRAVITY ROLLER 22 General Information...22 Tube 3/ Dia. x 20 Ga. Frame 21/2" x 1" x 12 Ga. Steel...25 Medium Duty Low Profile Support Model LP Kneebrace...60 Casters...60 Ceiling Hanger Model CH...61 Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 12 Ga. Steel...26 Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 1/ Ga. Al TELESCOPING Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 1/ Ga. Al General Information...62 Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 12 Ga. Steel...29 Skatewheel on All Sections...65 Tube 13/ Dia. x Ga. Frame 21/2" x 1" x 12 Ga. Steel... 13/8 x Ga. On All Sections...66 Tube 13/ Dia. x Ga. Frame 31/2" x 13/ x 11 Ga. Steel...31 BALL TABLES Tube 1.9" Dia. x Ga. Frame 31/2" x 13/ x 11 Ga. Steel...32 Ball Transfer Tables...67 Tube 1.9" Dia. x Ga. Frame 31/2" x 13/ x 1/ Ga. Al...33 Ball Transfer Inserts...68 Tube 1.9" Dia. x Ga. Frame 31/2" x 13/ x 11 Ga. Steel...34 Ball Transfers...69 Tube 1.9" Dia. x 12 Ga. Frame 31/2" x 13/ x 11 Ga. Steel...35 Guard Model GU Frame 31/2" x 13/ x 11 Ga. Steel...36 Guard Model GU Tube 1.9" Dia. x 9 Ga. Tube 21/2" Dia. x 14 Ga. Frame 31/2" x 13/ x 11 Ga. Steel...37 Guard Model GU Tube 21/2" Dia. x 11 Ga. Frame x x 7 Ga. Steel...38 Gate Kit Model HG...72 Tube 21/2" Dia. x 11 Ga. Frame x x 7 Ga. Steel...39 Hand Operated Stop Model RS140/RS Frame x x 7 Ga. Steel...40 Angle Stop Model AS Tube 21/2" Dia. x 11 Ga. Frame x 5.4 Lbs. Structural Steel...41 Angle Stop Model AS Tube 21/2" Dia. x 11 Ga. Frame x 5.4 Lbs. Structural Steel...42 Flat Stop Model FS Tube 25/ Dia. x 7 Ga. Frame x 5.4 Lbs. Structural Steel...43 Flat Stop Model FS Flat Stop Model FS Tube 25/ Dia. x 7 Ga. ROLLERS General Information / Dia. x 20 Ga. with 1/ Round Axle Model B / Dia. x 18 Ga. with 1/ Round Axle Model EG / Dia. x 18 Ga. with 1/ Round Axle Model EA / Dia. x 18 Ga. with 5/1 Hex Axle Model EFG / Dia. x 18 Ga. with 5/1 Hex Axle Model EFA CUSTOM SOLUTIONS 75 HELP SELECTING A PRODUCT 76 Gravity Conveyor vs Belt Conveyor...76 Skatewheel Conveyor vs Conveyor...77 Slider Bed vs Bed...78

5 POWER BELT Belt Conveyor General Information Because of their versatility and low cost, belt conveyors are the most commonly used type of powered conveyor. A belt conveys the product on either a slider or roller bed. Power Belt Slider Bed Controls The slider bed provides a quiet smooth conveying surface for light to medium loads. Because the belt slides on a metal bed a relatively high coefficient of friction is created, this reduces the load carrying capacity compared to a roller bed conveyor. Common controls that are available include: manual motor starters, magnetic starters, push buttons, variable speed controllers, safety cable pulls, etc. Please specify at the time of quoting which controls are required and whether installation is desired. Bed Incline/Decline Higher loads and less horsepower for the same load is one reason to select a roller bed conveyor versus a slider bed conveyor. Since the belt rides on free turning rollers the coefficient of friction is much less. The correct degree of incline or decline must be selected in order for the load not to tumble. Generally the degree of incline should not cause a vertical line drawn from the load s center of gravity to lie in the lower 1/3 of the load's length. h t Leng Center of Gravity Spacing Heig ht It is good practice to have at least three rollers under the product at all times. The load capacity per roller must not be exceeded. Standard roller spacing is six inches. 1/3 1/3 1/3 Angle Product Weight The power required for a slider bed conveyor is approximately six times greater than for a roller bed conveyor. Slider bed conveyors are used to convey light products or products that have a small irregular base, and where smooth travel is required. Refer to load capacity tables for each power conveyor. Maximum Degree of Incline/ Delcine Product Height Supports Normally select either the H15 or H floor supports. Castered supports are available only in the H model. Refer to each belt conveyor model to determine the correct floor support Belt The standard conveyor belt is a PVC 120 smooth top for horizontal conveyors and a PVC 120 rough top for incline conveyors. Other types of belting are available upon request. Product Length 4 5

6 POWER BELT Power Belt Slider Bed Model SB400 The Model SB400 slider bed conveyor provides a low cost smooth conveying surface which may be used for many applications such as: Packing Inspecting Sorting Testing Warning! To prevent pinch points that exist when power conveyors are placed adjacent to other conveyors or equipment use popout brackets and rollers. STANDARD CONSTRUCTION OPTIONAL EQUIPMENT Belting: PVC 120. Bed: 12 gauge painted formed steel, deep. Sections are bolted together with splice plates and floor supports. Drive Pulley: and diameter crowned and lagged, with 13/1 and 17/1 diameter shaft. Tail Pulley: diameter crowned with 13/1 diameter Belting: PVC white, PVC rough top, special belts upon request. Guard Rails: 21/2" and 31/2" fixed channel guards, refer to Accessories section. shaft. Return s: 1.9" diameter adjustable. TakeUp: takeup travel. Bearings: Sealed and prelubricated with cast iron housings. Motor: 1/2 HP 2/460, 3 phase, 60 HZ, TEFC. Belt Speed: 60 FPM constant. Optional Overhead Drive (Right Hand Shown) End Drive (Standard) Center Drive (Optional) 6 Floor Supports: Refer to Supports section, castered supports available. required is belt width plus 2". PopOut : Popout roller assemblies for use when equipment is placed adjacent to head pulley. Center Drive: Used for reversing applications. Overhead Drive: Solution for underside clearance problem. Auxiliary TakeUp: Provides additional belt takeup, required on units longer than 51'. Motor: Other voltages, single phase, energy efficient, invertor duty, etc. Other HP available. Belt Speed: Other constant and variable speeds available. Controls: Manual starters, magnetic starters, push button stations, photo eyes, etc. are available. Right Hand Drive Shown (Standard) Right Hand Drive Shown (Standard)

7 POWER BELT Slider Bed Model SB400 SB400 TABLE OF WEIGHTS (LBS.) Power Belt Belt Width Overall Length Bed Length Drive Pulley Diameter 101/2" 1/2" 221/2" SB40006B 6' 5' SB40011B 11' 10' SB400B ' 15' 340 SB40021B 21' 20' 372 SB40026B 26' 25' SB40031B 31' ' SB40036B 36' SB40041B 41' SB40046B " 3 281/2" 3 401/2" ' , 014 1, ' , 026 1, 106 1, ' 45' ,002 1, 137 1, 226 1, 3 SB40051B 51' 50' , 084 1, 235 1, 335 1, 440 SB40056B 56' 55' 685 1, 172 1, 336 1, 445 1, 560 SB40061B 61' 60' , 1, 439 1, 550 1, 680 SB40066B 66' 65' , 373 1, 591 1, 610 1, 792 SB40071B 71' 70' 785 1, 004 1, 476 1, 643 1, 708 1, 899 SB40076B 76' 75' 820 1, 056 1, 579 1, 745 1, 810 2, 005 SB40081B 81' 80' 852 1, 108 1, 681 1, 847 1, 919 2, 115 SB40086B 86' 85' 885 1, 0 1, 783 1, 950 2, 020 SB40091B 91' 90' 920 1, 212 1, 884 2, 002 2, 122 Overall Bed Width SB40096B 96' 95' 952 1, 267 1, 993 2, 053 2, 2 SB400101B 101' 100' 985 1, 319 2, 092 2, 107 2, 338 Replace " " in with Belt Width. SB400 DISTRIBUTED LOAD CAPACITY CHART AT CONSTANT 60 FPM HP 1/2 3/4 1 Belt Width To Overall Length 25 Incline Overall Length Drive Pulley Drive Pulley 11' 21' 31' 41' 51' 76' 101' 11' 21' 31' 41' 51'

8 POWER BELT Power Belt Slider Bed Model SB350 The Model SB350 slider bed conveyor provides a low cost smooth conveying surface which may be used for many applications such as: Assembly Packing Sorting Testing Warning! To prevent pinch points that exist when power conveyors are placed adjacent to other conveyors or equipment use popout brackets and rollers. STANDARD CONSTRUCTION OPTIONAL EQUIPMENT Belting: PVC 120. Bed: 14 ga. steel. Drive Pulley: and diameter crowned and lagged, with 13/1 and 17/1 diameter shaft Frame: 31/2" x 13/ x 11 ga. steel channel Tail Pulley: diameter crowned with 13/1 diameter shaft. Return s: 1.9" diameter adjustable. TakeUp: takeup travel. Bearings: Sealed and prelubricated with cast iron housings. Motor: 1/2 HP 2/460, 3 phase, 60 HZ, TEFC. Belt Speed: 60 FPM constant. Belting: PVC white, PVC rough top, special belts upon request. Guard Rails: 21/2" and 31/2" fixed channel guards, refer to Accessories section. Floor Supports: Refer to Supports section, castered supports available. required is belt width plus. PopOut : Popout roller assemblies for use when equipment is placed adjacent to head pulley. Center Drive: Used for reversing applications. Auxiliary TakeUp: Provides additional belt takeup, required on units longer than 51'. Motor: Other voltages, single phase, energy efficient, invertor duty, etc. Other HP available. Belt Speed: Other constant and variable speeds available. Controls: Manual starters, magnetic starters, push button stations, photo eyes, etc. are available. 8 End Drive (Standard) Right Hand Drive Shown (Standard) Center Drive (Optional) Right Hand Drive Shown (Standard)

9 POWER BELT Slider Bed Model SB350 SB350 TABLE OF WEIGHTS (LBS.) Power Belt Belt Width Overall Length Drive Pulley Diameter Bed Length 9" " (Between Frame) SB35007B 7' 5' SB35012B 12' 10' SB35017B 17' 15' SB35022B 22' 20' SB35027B 27' 25' , 007 1, 122 SB35032B 32' ' , 022 1, 146 1, 279 SB35037B 37' 35' , 154 1, 296 1, 448 SB35042B 42' 40' , 029 1, 291 1, 452 1, 624 SB35047B 47' 45' , 140 1, 434 1, 613 1, 806 SB35052B 52' 50' 900 1, 068 1, 237 1, 560 1, 758 1, 969 SB35057B 57' 55' 980 1, 158 1, 337 1, 700 1, 921 2, 142 SB35062B 62' 60' 1, 060 1, 248 1, 437 1, 840 2, 084 2, 315 SB35067B 67' 65' 1, 440 1, 338 1, 537 1, 980 2, 247 2, 488 SB35072B 72' 70' 1, 220 1, 428 1, 638 2, 120 2, 410 2, 661 SB35077B 77' 75' 1, 0 1, 518 1, 736 2, 260 2, 573 2, 834 SB35082B 82' 80' 1, 380 1, 608 1, 839 2, 400 2, 736 3, 007 SB35087B 87' 85' 1, 460 1, 698 1, 935 2, 540 2, 899 SB35092B 92' 90' 1, 540 1, 788 2, 037 2, 680 3, 062 SB35097B 97' 95' 1, 620 1, 878 2, 137 2, 820 3, 225 SB350102B 102' 100' 1, 700 1, 968 2, 237 2, 960 3, 388 Replace " " in with Belt Width. SB350 DISTRIBUTED LOAD CAPACITY CHART AT CONSTANT 60 FPM HP 1/2 3/4 1 Belt Width To Overall Length 25 Incline Overall Length Drive Pulley Drive Pulley 12' 22' 32' 42' 52' 77' 102' 12' 22' 32' 42' 52'

10 POWER BELT Power Belt Bed Model RB190 The Model RB190 roller bed will transport heavier unit loads. The roller bed reduces friction, provides greater capacity and is well suited for moving product throughout a facility. Warning! To prevent pinch points that exist when power conveyors are placed adjacent to other conveyors or equipment use popout brackets and rollers. STANDARD CONSTRUCTION OPTIONAL EQUIPMENT Belting: PVC 120. Bed: 1.9" x ga. galvanized steel rollers on centers. Frame: 31/2" x 13/ x 11 ga. steel channel Drive Pulley: and diameter crowned and lagged, with 13/1 and 17/1 diameter shaft Tail Pulley: diameter crowned with 13/1 diameter Belting: PVC white, PVC rough top, special belts upon request. : roller centers available. Guard Rails: 21/2" and 31/2" fixed channel guards, refer to Accessories section. shaft. Return s: 1.9" diameter adjustable. TakeUp: takeup travel. Bearings: Sealed and prelubricated with cast iron housings. Motor: 1/2 HP 2/460, 3 phase, 60 HZ, TEFC. Belt Speed: 60 FPM constant. 10 Floor Supports: Refer to Floor Supports section, castered supports available. required is belt width plus. PopOut : Popout roller assemblies for use when equipment is placed adjacent to head pulley. Center Drive: Used for reversing applications. Auxiliary TakeUp: Provides additional belt takeup, required on units longer than 51'. Motor: Other voltages, single phase, energy efficient, invertor duty, etc. Other HP available. Belt Speed: Other constant and variable speeds available. Controls: Manual starters, magnetic starters, push buttonstations, photo eyes, etc. are available. End Drive (Standard) Right Hand Drive Shown (Standard) Center Drive (Optional) Right Hand Drive Shown (Standard)

11 POWER BELT Bed Model RB190 RB190 TABLE OF WEIGHTS (LBS.) Power Belt Belt Width Overall Length Bed Length Drive Pulley Diameter 9" 2 3 RB19007B 7' 5' RB19012B 12' 10' RB19017B 17' 15' RB19022B 22' 20' RB19027B 27' 25' RB19032B 32' ' , 000 1, 124 RB19037B 37' 35' , 125 1, 267 RB19042B 42' 40' , 109 1, 258 1, 418 RB19047B 47' 45' , 048 1, 229 1, 395 1, 574 RB19052B 52' 50' , 135 1, 333 1, 5 1, 712 RB10057B 57' 55' 833 1, 029 1, 229 1, 445 1, 645 1, 859 RB19062B 62' 60' 899 1, 107 1, 323 1, 557 1, 774 2, 006 RB10067B 67' 65' 965 1, 185 1, 417 1, 669 1, 903 2, 153 RB19072B 72' 70' 1, 031 1, 263 1, 511 1, 781 2, 032 2, 0 RB10077B 77' 75' 1, 097 1, 341 1, 605 1, 893 2, 1 2, 447 RB19082B 82' 80' 1, 3 1, 419 1, 699 2, 005 2, 290 2, 5 RB10087B 87' 85' 1, 229 1, 497 1, 793 2, 117 2, 419 2, 741 RB19092B 92' 90' 1, 295 1, 575 1, 887 2, 229 2, 548 2, 888 " 3 (Between Frame) RB10097B 97' 95' 1, 361 1, 653 1, 981 2, 341 2, 677 3, 035 RB10102B 102' 100' 1, 427 1, 731 2, 075 2, 453 2, 806 3, 182 Replace " " in with Belt Width. RB190 DISTRIBUTED LOAD CAPACITY CHART AT CONSTANT 60 FPM AND ROLLER CENTERS HP 1/2 3/4 1 Belt Width To Overall Length 25 Incline Overall Length Drive Pulley Drive Pulley 12' 22' 32' 42' 52' 77' 102' 12' 22' 32' 42' 52' 3, 005 2, 970 2, 885 2, 800 2, 715 2, 020 1, , 905 2, 755 2, 605 2, 455 2, 5 1, 445 1, , 755 2, 540 2, 325 2, 110 1, , 670 4, 585 4, 005 4, 415 4, 3 3, 395 3, , 520 4, 370 4, 220 4, 070 3, 920 2, 820 2, , 370 4, 155 3, 0 3, 725 3, 510 2, 245 1, , 000 6, 000 6, 000 6, 000 5, 5 4, 770 4, , 000 5, 985 5, 835 5, 685 5, 535 4, 195 3, , 985 5, 770 5, 555 5, 340 5, 125 3, 620 3,

12 POWER BELT Power Belt Slider Bed Incline Model SBI350 The Model SBI350 incline conveyor provides a smooth conveying surface and allows movement of cartons, boxes, etc., floortofloor in either direction. It can also be used to increase elevation in gravity flow situations. STANDARD CONSTRUCTION OPTIONAL EQUIPMENT Belting: PVC 120 rough top. Bed: 12 ga. steel.frame: 31/2" x 13/ x 11 ga. steel channel Drive Pulley: diameter crowned and lagged, with 17/1 diameter shaft Tail Pulley: diameter crowned with 13/1 diameter Belting: Special belts upon request. Guard Rails: 21/2" and 31/2" fixed channel guards, refer to Accessories section. Floor Supports: Refer to Floor Supports section, castered supports available. required is belt width plus. Ceiling Hangers: Ceiling hangers available, refer to supports section. PopOut : Popout roller assemblies for use when equipment is placed adjacent to head or tail pully. Motor: Other voltages, single phase, energy efficient, inverter duty, etc. Other HP available. Power Feeder: Chain driven power feeder available to provide a smooth transition to incline. Belt Speed: Other constant and variable speeds available. Controls: Manual starters, magnetic starters, push button stations, photo eyes, etc. are available. shaft. Return s: 1.9" diameter adjustable. TakeUp: takeup travel. Bearings: Sealed and prelubricated with cast iron housings. Motor: 3/4 HP 2/460, 3 phase, 60 HZ, TEFC. Belt Speed: 60 FPM constant. Drive: Right hand center drive standard, allows for reversing operation. Noseover: Double noseover included, adjustable from 0 degrees. Right Hand Drive Shown (Standard) Warning! To prevent pinch points that exist when power conveyors are placed adjacent to other conveyors or equipment use popout brackets and rollers. 12

13 POWER BELT Slider Bed Incline Model SBI350 SBI350 TABLE OF WEIGHTS (LBS.) Power Belt Belt Width Overall Length Bed Length Drive Pulley Diameter 9" 2 3 SBI35010B 14' 10' SBI35015B 19' 15' SBI35020B 24' 20' , 006 1, 117 SBI35025B 29' 25' , 024 1, 152 1, 281 SBI350B 34' ' , 146 1, 291 1, 437 SBI35035B 39' 35' , 025 1, 1, 434 1, 597 SBI35040B 44' 40' , 124 1, 399 1, 581 1, 765 SBI35045B 49' 45' 871 1, 046 1, 221 1, 526 1, 726 1, 928 SBI35050B 54' 50' 937 1, 128 1, 318 1, 653 1, 871 2, 092 " 3 (Between Frame) Replace " " in with Belt Width. SBI350 DISTRIBUTED LOAD CAPACITY CHART AT CONSTANT 60 FPM HP 3/4 1 11/2 2 Overall Length At 15 Incline Overall Length At 25 Incline 14' 24' 54' 14' 24' 54' Belt Width To 13

14 POWER BELT Power Belt Bed Incline Model RBI190 The Model RBI190 incline conveyor allows movement of cartons, boxes, etc., floortofloor in either direction. The roller bed provides a higher capacity and can also be used to increase elevation in gravity flow situations. STANDARD CONSTRUCTION OPTIONAL EQUIPMENT Belting: PVC 120 rough top. Bed: 1.9" x ga. galvanized steel rollers on centers. Frame: 31/2" x 13/ x 11 ga. steel channel Drive Pulley: diameter crowned and lagged, with 17/1 diameter shaft Tail Pulley: diameter crowned with 13/1 diameter Belting: Special belts upon request. : roller centers available. Guard Rails: 21/2" and 31/2" fixed channel guards, refer to Accessories section. Floor Supports: Refer to Floor Supports section. required is belt width plus. Ceiling Hangers: Ceiling hangers avaiable, refer to Supports Section PopOut : Popout roller assemblies for use when equipment is placed adjacent to head or tail pulley. Motor: Other voltages, single phase, energy efficient, inverter duty, etc. Other HP available. Power Feeder: Chain driven power feeder available to provide a smooth transition to incline. Belt Speed: Other constant and variable speeds available. Controls: Manual starters, magnetic starters, push button stations, photo eyes, etc. are available. shaft. Return s: 1.9" diameter adjustable. TakeUp: takeup travel. Bearings: Sealed and prelubricated with cast iron housings. Motor: 3/4 HP 2/460, 3 phase, 60 HZ, TEFC. Belt Speed: 60 FPM constant. Drive: Right hand center drive standard, allows for reversing operation. Noseover: Double noseover included, adjustable from 0 degrees. Right Hand Drive Shown (Standard) Warning! To prevent pinch points that exist when power conveyors are placed adjacent to other conveyors or equipment use popout brackets and rollers. 14

15 POWER BELT Bed Incline Model RBI190 RBI190 TABLE OF WEIGHTS (LBS.) Power Belt Belt Width Overall Length Bed Length Drive Pulley Diameter 9" 2 3 RBI19010B 14' 10' RBI19015B 19' 15' RBI19020B 24' 20' , 014 RBI19025B 29' 25' , 031 1, 152 RBI190B 34' ' , 009 1, 145 1, 283 RBI19035B 39' ' , 105 1, 260 1, 415 RBI19040B 44' 40' , 042 1, 217 1, 387 1, 559 RBI19045B 49' 45' , 129 1, 321 1, 508 1, 697 RBI19050B 54' 50' 805 1, 011 1, 2 1, 425 1, 629 1, 835 " 3 (Between Frame) Replace " " in with Belt Width. RBI190 DISTRIBUTED LOAD CAPACITY CHART AT CONSTANT 60 FPM AND ROLLER CENTERS HP 3/4 1 11/2 2 Belt Width To Overall Length At 15 Incline Overall Length At 25 Incline 14' 24' 54' 14' 24' 54' , 5 1, 290 1, , 275 1, 250 1, , 250 1, 215 1, , 750 1, 735 1, 690 1, 140 1, 135 1, 105 1, 720 1, 700 1, 625 1, 125 1, 110 1, , 695 1, 660 1, 555 1, 105 1, 085 1,

16 POWER BELT Power Belt Incline Lift Chart ' ' 8' ' ' ' h gt ' In ' 18 ' ' ' ' 8' ' 20 ' n Le ' 2' Vertical Rise ne cli 0' ' 10' 12' 14' ' 18' 20' 22' 24' 26' Horizontal Distance 28' ' 32' 34' 36' 38' 40'

17 POWER BELT Optional Equipment PopOut Brackets Power Belt PopOut Brackets are used when placing a belt conveyor adjacent to other conveyors or equipment. The bracket and roller assembly allow the roller to "popout" if an object becomes entangled between it and the belt. Warning! To prevent pinch points that exist when power conveyors are placed adjacent to other conveyors or equipment use popout brackets and rollers. SB400 For SB400 belt conveyors, use at head pulley and also tail pulley if the conveyor is reversing. The pulley model allows hook and rod gravity conveyor to be attached using the included shoulder bolts. Gravity conveyor OF must be more than the belt width. Model KG roller included. Pulley Dia. Wt. (Lbs.) PBSB404B Belt Width+ 2 + (BW x.15) PBSB408B Belt Width + 51/ (BW x.15) SB400 PopOut Brkt Replace " " in with Belt Width. SB400 PopOut Brkt RB190/SB350 For RB190 and SB350 belt conveyor, use at head pulley. Model KG roller included. Pulley Dia. Wt. (Lbs.) PBRB19B & Belt Width+ 2 + (BW x.15) RB190/SB350 PopOut Brkt & Replace " " in with Belt Width. 17

18 POWER BELT Power Belt Optional Equipment Power Feeder Power feeders are for use with RBI190 and SBI350 incline conveyors. Power feeders ensure a smooth transition to an incline conveyor. Belting: PVC 120 with staple lacing. Other belts available. Drive Pulley: diameter, crowned and lagged; 13/1 diameter shaft. Tail Pulley: diameter, crowned. Drive: Driven from tail pulley of conveyor at a 1:1 ratio. Other ratios available. RH standard; LH available. TakeUp: belt takeup at tail pulley Bearings: Sealed and prelubricated with cast iron housings Frame: 31/2" x 13/ x 11 ga. channel painted steel Bed: SBPF (slider bed) RBPF (roller bed) 14 ga. steel for 9", & 1.9" O.D. x ga. galvanized steel rollers 12 ga. steel for 2, 3, & Belt Width " 3 Between Frame Width () 9" 2 3 SBPFB RBPFB Standard Length 4' 0" 4' 0" 4' 0" 5' 0" 6' 0" 8' 0" Replace " " in with Belt Width. 18

19 GRAVITY SKATEWHEEL Gravity Skatewheel Conveyor General Information Ashland Conveyor Product s gravity skatewheel conveyors are available in many size and configurations as shown on the following pages. There are many factors to consider when selecting a skatewheel conveyor. The following is intended to aid in the selection process. Load Type Wheel Density Wheel density is described as wheels per foot. There must be a minimum of three axles and five wheels under the load at all times. Skatewheel Gravity skatewheel conveyor will convey lightweight loads that have firm flat bottoms such as cartons, totes, cases, etc. Skatewheel conveyor rolls more easily than roller conveyor allowing for lighter packages and less slope. Also the individual wheels in the curve sections allow packages to track more so than roller conveyor. Frame Couplers Standard couplers for skatewheel conveyor are hook and rod. Hook and rod couplers allow for quick setup. Butt couplings are available upon request. Curves Wheel Capacity Wheel capacities are available at 75 and 100 lbs. in zinc plated steel, 75 lbs. in aluminum, and 75 lbs. in plastic. The wheel density must provide enough wheels under the load so that the total wheel capacity exceeds the maximum load. Frame Capacity Load Width Load Length " 2 2 " The frame must be capable of supporting both the conveyed items and the skatewheel conveyor. Frame capacities are provided for 5 foot and 10 foot support centers. Applications that exceed frame capacities may require additional supports. 750 Lbs. (Evenly Distributed Load) 10' 0" = 75 Lbs./Ft. Live Load Dead Load 171 Lbs. (Conveyor Weight) 10 0" = 17.1 Lbs./Ft. 10' 0" Live Load Dead Load Total Load Many times curves will determine the width of the conveyor system, as the product requires additional space to negotiate the turn. This additional space depends upon the length and width of the product. Refer to the following table: Skatewheel Curve Width (Based on full inside frame coverage) 75 Lbs./Ft Lbs./Ft. 92 Lbs./Ft. OAW OAW 1 1 OAW 20" Floor Supports Both the weight of the conveyed items and the conveyor must be considered when selecting floor supports. The nominal height of the support is to the bottom of the conveyor frame. Either Hstand supports or tripods (temporary setup) may be selected. 19

20 GRAVITY SKATEWHEEL Patterns & Replacement s Skatewheel SKATEWHEEL PATTERNS SKATEWHEEL PARTS 20 Material Capacity (Lbs.) O.D. Bore Face Width Hub Width Wt. (Lbs.) per 1, Steel Zinc Plated /1 1/ 5/ 13/ Steel Zinc Plated /1 1/ 9/1 13/ Aluminum /1 1/ 5/ 13/ Black Nylon /1 1/ 5/ 13/1 50

21 GRAVITY SKATEWHEEL Straight Sections Gravity Skatewheel Conveyor is used to transport lightweight packages or for operation that required lightweight sections. Primarily they are used in shipping departments, stocking areas, assembly lines, etc. Hook & rod couplers along with tripod supports make it ideal for temporary setup. STRAIGHT SECTIONS Wheels: 115/1 diameter wheels; 1/ ball bearings set in hardened raceway, prelubricated, zinc plated steel. Aluminum wheels are available. Wheel capacity 75 Lbs. and 100 Lbs. Couplings: Zinc plated hook and rod Axles: 1/ diameter steel; one end threaded with locking nut. Frame: 21/2" x 1" x 12 ga. channel galvanized steel or 1/ heat treated aluminum. Bolt together crossbraces. Galvanized OAW OAW OAW OAW Aluminum Length OAW Wheels/Ft. Axle 18 5' ' 8 12x10x05A 19 5' x10x10A 36 10' x12x05A 20 5' 12 12x12x10G 68 12x12x10A 38 10' 12 12xx05G 40 12xx05A 22 5' 12xx10G 78 12xx10A 43 10' 12x32x05G 64 12x32x05A 35 5' 32 12x32x10G x32x10A 69 10' 32 15x10x05G 35 15x10x05A 20 5' 10 15x10x10G 68 15x10x10A 38 10' 10 15xx05G 42 15xx05A 23 5' 15xx10G 82 15xx10A 45 10' 18x12x05G 40 18x12x05A 23 5' 12 18x12x10G 78 18x12x10A 45 10' 12 18x14x05G 42 18x14x05A 25 5' 14 18x14x10G 82 18x14x10A 48 10' 14 18xx05G 43 18xx05A 26 5' 18xx10G 85 18xx10A 50 10' 18x18x05G 45 18x18x05A 27 5' 18 18x18x10G 88 18x18x10A 51 10' 18 Wt. (Lbs.) Wt. (Lbs.) 12x08x05G 31 12x08x05A 12x08x10G 60 12x08x10A 12x10x05G 33 12x10x10G 12x12x05G 18x32x05G 69 18x32x05A 40 5' 32 18x32x10G x32x10A 80 10' 32 24x20x05G 52 24x20x05A 32 5' 20 24x20x10G x20x10A 61 10' 20 24x24x05G 56 24x24x05A 33 5' 24 24x24x10G x24x10A 65 10' 24 24x28x05G 60 24x28x05A 36 5' 28 24x28x10G x28x10A 70 10' 28 24x32x05G 80 24x32x05A 48 5' 32 24x32x10G x32x10A 10' 32 24x40x05G 90 24x40x05A 54 5' 40 24x40x10G x40x10A ' 40 Skatewheel Capacity: Maximum distributed live load Frame Aluminum Lbs/Ft. on 10' support centers 150 Lbs./Ft. on 5' support centers Steel 36 Lbs./Ft. on 10' support centers 260 Lbs./Ft. on 5' support centers Maximum load per wheel: Wheels Aluminum 75 Lbs. each Steel 75 Lbs. each High Cap. 100 Lbs. each CONSTRUCTION: 21

22 GRAVITY SKATEWHEEL Curve Sections CURVE SECTIONS Skatewheel Galvanized Wt. (Lbs.) Wt. (Lbs.) Angle (degrees) OAW Aluminum Wheels/ Ft. Axle 12x10x45G 19 12x10x45A x10x90G 35 12x10x90A xx45G 22 12xx45A xx90G 42 12xx90A x32x45G 35 12x32x45A x32x90G 68 12x32x90A x10x45G 20 15x10x45A x10x90G 37 15x10x90A xx45G 27 15xx45A 45 15xx90G 51 15xx90A 90 18xx45G 25 18xx45A 45 18xx90G 48 18xx90A x18x45G 26 18x18x45A x18x90G 50 18x18x90A x32x45G 40 18x32x45A x32x90G 77 18x32x90A x20x45G 31 24x20x45A x20x90G 59 24x20x90A x24x45G 34 24x24x45A x24x90G 64 24x24x90A x32x45G 47 24x32x45A x32x90G 89 24x32x90A x40x45G 52 24x40x45A x40x90G x40x90A Degree Curve 45 Degree Curve Spur Sections Skatewheel Spurs are used to divert products from one conveying line to another. Straight spurs are listed at and 45 degrees. Curved spurs are listed in 90 degrees only. All spurs must be specified as either right hand RIGHT HAND R.H. 45 Straight Spur Straight Curved 22 12x10xSSGL. LEFT HAND R.H. 90 Curved Spur Galvanized or left hand. For example a left hand OAW degree straight would be L.H. 90 Curved Spur L.H. 45 Straight Spur Wt. (Lbs.) Wt. (Lbs.) Angle (degrees) 12x12xSSG 22 12x12xSSA x12x45SSG 20 12x12x45SSA xxSSG 26 15xxSSA 19 15xx45SSG 23 15xx45SSA 45 18x18xSSG 18x18xSSA x18x45SSG 26 18x18x45SSA x24xSSG 40 24x24xSSA x24x45SSG 34 24x24x45SSA x12x90SG 29 12x12x90SA xx90SG 32 15xx90SG x18x90SG 34 18x18x90SA x24x90SG 40 24x24x90SA Aluminum OAW Wheels/Ft. Axle

23 GRAVITY SKATEWHEEL Flow Rails Models FR1, FR2, FR3, FR4 Flow Rails are constructed of standard skatewheels attached to various angle or channel shapes. They are well suited for storage flow racks. For pallet flow, 100 Lb. wheels are recommended. In addition to the models listed, staggered wheels, plastic wheels, and varying lengths are available. CONSTRUCTION: Frame: FR1: 2" x x 1/ painted structural steel angle. FR2: x 21/ x 23/ x 12 ga. galvanized steel J channel. FR3 & FR4: 21/2" x 1 x 12 ga. galvanized steel channel. Model FR1 Model FR2 Model FR3 Model FR4 Wheel Capacity Axle Wt. (Lbs./Ft.) Maximum Load Per Foot (Lbs.) At Specified Support 3' 4' 5' 6' 7' 8' FR Lbs FR FR FR ' FR FR FR FR FR FR Replace " " in with 05 for 5' or 10 for 10' length. Model FR4 23 Skatewheel Wheels: 115/1 diameter wheels; 1/ ball bearings set in hardened raceway, prelubricated, zinc plated steel. Aluminum wheels are available. Wheel capacity 75 Lbs. and 100 Lbs. Axles: 1/ diameter steel; one end threaded with locking nut.

24 GRAVITY ROLLER Gravity ROller Conveyor General Information Ashland Conveyor Product's gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following is intended to aid in the selection process. Load Type Gravity roller conveyor will convey loads that have firm flat bottoms such as cartons, totes, skids, firm bags, drums, etc. size Size is determined by: Load in general heavier loads will require larger rollers that meet or exceed the load per roller Loading conditions an impact loading condition may require larger and/or heavier gauge tubing channel. Butt couplings are bolted together for more permanent installations while hook and rod couplers are for quick, temporary setups (refer to the Frame Styles page). Frame Capacity The frame must be capable of supporting both the conveyed items and the frame and rollers. The Frame Styles page provides frame capacities based upon 5 foot and 10 foot support centers. Applications that exceed capacities may require additional supports or a heavier frame. 750 Lbs (Evenly Distributed Load) 10' 0" = 75 Lbs/Ft Dead Load Live Load 171 Lbs (Conveyor Weight) 10 0" = 17.1 Lbs/Ft 10' 0" A minimum of three rollers should be in contact with the load at all times. centers may need to be reduced even further in order to reduce the load per roller. Live Load Dead Load Total Load 75.0 Lbs/Ft Lbs/Ft 92.0 Lbs/Ft Slope s Set High or Low Most roller conveyors can be ordered set high or set low. Ashland Conveyor Products standard is set high. s set high places the load above the frame allowing the load to overhang. s set low places the rollers below the frame allowing the frame to act as a guard. When specifying set low the between frame dimension should allow for one inch clearance on each side of the largest conveyed item. As a general guide refer to the following table when determining slope. Conveying a heavier, firm surface will require less slope than a lighter, softer surface. Some applications may require brake rollers to retard the speed of conveyed items. A field test should always be performed to determine proper slope. Item Firm Cartons Steel Drums Tote Frame Couplers The two standard frame couplers are butt couplings, 21/2, 31/2 and 4 channel, and hook and rod couplers, 21/2 24 Pallet With Runners Weight (Lbs.) Slope Required To Start And Move Product Inches/Foot Inches/10' 5 7/ 9" 10 3/ 71/2" 50 1/2" 5" 100 3/ 33/ 150 3/ 33/ 0 1/ 21/2" 10 1/2" 5" 25 3/ 33/ 50 5/1 31/ 100 1/ 21/2" 50 1/2" 5" 100 7/1 43/ 250 3/ 33/ 500 5/1 31/

25 GRAVITY ROLLER General Information Curves 31/2" Channel Frames (" IR) Many times curves will determine the width of the conveyor system, as the product requires additional space to negotiate the turn. This additional space depends upon the length and width of the product. Refer to the following tables and formula. Product Length Product Width 1 20" 2 32" 3 Min. Conveyor Between Frame Dimension 1 2 " " " " " 3 20" 11" " 1 20" " 2 9" 1 20" 2 32" 3 32" " 3 40" " " 40" 11" 2 " " " " " 2 35" 3 42" 52" 2 32" 3 4 Channel Frames (321/2" IR) Product Length Product Width 1 20" 2 32" 3 Min. Conveyor Between Frame Dimension Curve Width Min. B.F. Required = (R + Width) + 2 Length 2 2 R+2 21/2" Channel Frames (3 IR) Product Length 1 2 " " " " " 11" " " 2 9" 1 20" 2 32" 3 32" 9" " 3 40" " " 40" 11" 2 29" " " " " 2 35" 3 42" 52" " 35" 4 Product Width 1 20" 2 32" 3 Min. Conveyor Between Frame Dimension 1 2 " " " " 2 2 " " 11" " " " 2 32" 35" 32" 9" " 2 32" 3 40" " 32" 3 40" Floor Supports Both the weight of the conveyed items and the conveyor must be considered when selecting floor supports. The nominal height of the support is to the bottom of the conveyor frame. For hook and rod conveyor either Hstand supports or tripods may be selected. 25

26 GRAVITY ROLLER General Information FRAME STYLES 21/2" Channel Aluminum Capacity 21/2" x 1" x 1/ Lbs./Ft. on 10' support centers 120 Lbs./Ft. on 5' support centers Steel Capacity 21/2" x 1" x 12 ga. 36 Lbs./Ft. on 10' support centers 260 Lbs./Ft. on 5' support centers Hook & Rod Coupling 31/2" Channel Aluminum Capacity 31/2" x 13/ x 1/ 45 Lbs./Ft. on 10' support centers 420 Lbs./Ft. on 5' support centers Steel Capacity 31/2" x 13/ x 11 ga. 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers Butt Coupling Channel Steel Capacity x x 7 ga. 2 Lbs./Ft. on 10' support centers 1,050 Lbs./Ft. on 5' support centers Structural Steel Capacity x 5.4 Lbs. structural 0 Lbs./Ft. on 10' support centers 1,550 Lbs./Ft. on 5' support centers Standard Lower Flange Hole Pattern (10' Length) 26

27 GRAVITY ROLLER B Tube 3/ Dia. x 20 Ga. Frame 21/2" x 1" x 12 Ga. Steel : Model B Tube: 3/ O.D. x 20 ga. plain steel Axle: 1/ diameter steel Bearing: Light oil, press fit Axle Retention: Spring retained Frame: 21/2" x 1" x 12 ga. painted steel channel Crossbraces: 1" x 1" x 1/ steel angle Coupling: Butt plate standard Capacity: Weight of section must be included Maximum distributed live load: Frame 36 Lbs./Ft. on 10' support centers 260 Lbs./Ft. on 5' support centers Available Set Low Only Refer to models for capacity 1F B01B07 1" F B01B 1" " F B02B 2" 38 1F B03B F B03B F B01B10 1" F B01B19 1" " 60 1F B02B19 2" F B03B F B03B F B01B13 1" F B01B21 1" " F B02B21 2" F B03B F B03B F B01B15 1" F B01B22 1" " F B02B22 2" F B03B F B02B07 1F B02B10 1F B02B13 1F B02B15 1 1F B03B15 1 Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES Wt. 45 Wt. 90 1F B01B07 1" F B01B10 1" F B01B13 1 1" F B01B15 1" F B01B 1 1" 60 1F B01B19 1" F B01B21 1" F B01B22 1" Replace " " in with "90" for 90 degree or "45" for 45 degree. 27 STRAIGHT SECTIONS 5' & 10' LENGTHS

28 GRAVITY ROLLER Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 12 Ga. Steel EG : Model EG Tube: 13/ O.D. x 18 ga. galvanized steel Axle: 1/ diameter steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 21/2" x 1" x ga. galvanized steel channel Crossbraces: Galvanized steel Coupling: Zinc Plated Hook & Rod Capacity: Weight of section must be included Maximum distributed live load: Frame 36 Lbs./Ft. on 10' support centers 260 Lbs./Ft. on 5' support centers Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS 11F EG15B F EG03B F EG45B15 11F EG06B F EG15B F EG45B07 11F EG03B10 11F EG15B F EG03B F EG45B21 11F EG06B F EG15B F EG03B F EG45B 11F EG06B F EG15B F EG45B10 11F EG03B13 11F EG45B F EG15B F EG03B F EG06B F EG15B F EG03B F EG45B22 11F EG06B 59 11F EG06B F EG15B F EG03B F EG45B F EG06B19 11F EG06B Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 11F EG15B07 11F EG03B07 11F EG15B10 11F EG03B10 11F EG15B13 11F EG03B13 11F EG15B15 11F EG03B15 11F EG15B 11F EG03B 11F EG15B19 11F EG03B19 11F EG15B21 11F EG03B Wt. 45 Wt F EG15B F EG03B Replace " " in with "90" for 90 degree or "45" for 45 degree. 28 Wt. 45 Wt

29 GRAVITY ROLLER EA Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 1/ Ga. Al. : Model EA Tube: 13/ O.D. x 18 ga. aluminum Axle: 1/ diameter steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 21/2" x 1" x 1/ aluminum channel Crossbraces: Extruded aluminum Coupling: Zinc Plated Hook & Rod Capacity: Weight of section must be included Maximum distributed live load: Frame Lbs./Ft. on 10' support centers 120 Lbs./Ft. on 5' support centers Refer to models for capacity Wt..5' Wt..5' 12F EA15B F EA03B F EA15B F EA03B F EA45B F EA45B21 12F EA06B F EA06B F EA15B F EA15B 35 12F EA03B F EA03B F EA45B 12F EA06B F EA15B F EA45B07 12F EA45B10 12F EA03B13 12F EA45B F EA06B13 Wt..5' 12F EA15B F EA03B F EA06B F EA15B F EA03B F EA45B F EA06B F EA06B F EA15B F EA03B F EA45B F EA06B Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 12F EA15B07 12F EA03B07 12F EA15B10 12F EA03B10 12F EA15B13 12F EA03B13 12F EA15B15 12F EA03B15 12F EA15B 12F EA03B 12F EA15B19 12F EA03B19 12F EA15B21 12F EA03B Wt. 45 Wt F EA15B F EA03B Wt. 45 Wt Replace " " in with "90" for 90 degree or "45" for 45 degree. 29 STRAIGHT SECTIONS 5' & 10' LENGTHS

30 GRAVITY ROLLER Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 1/ Ga. Al. EFA : Model EFA Tube: 13/ O.D. x 18 ga. aluminium Axle: 5/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 21/2" x 1" x 1/ aluminium channel Crossbraces: 1" x 1" x 1/ aluminium angle Coupling: Butt plate standard; Hook & Rod optional Capacity: Weight of section must be included Maximum distributed live load: Frame Lbs./Ft. on 10' support centers 120 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS 2F EFA15B F EFA03B F EFA45B15 2F EFA06B F EFA15B F EFA45B07 2F EFA03B10 2F EFA15B F EFA03B F EFA45B21 2F EFA06B F EFA15B F EFA03B 33 2F EFA45B 2F EFA06B F EFA15B F EFA45B10 2F EFA03B13 2F EFA45B13 1 2F EFA06B13 2F EFA15B F EFA03B F EFA06B F EFA15B F EFA03B F EFA45B22 2F EFA06B F EFA06B F EFA15B F EFA03B F EFA45B F EFA06B Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 2F EFA15B07 2F EFA03B07 2F EFA15B10 2F EFA03B10 2F EFA15B13 2F EFA03B13 2F EFA15B15 2F EFA03B15 2F EFA15B 2F EFA03B 2F EFA15B19 2F EFA03B19 2F EFA15B21 2F EFA03B Wt. 45 Wt F EFA15B22 8 2F EFA03B Replace " " in with "90" for 90 degree or "45" for 45 degree. Wt. 45 Wt

31 GRAVITY ROLLER EFG Tube 13/ Dia. x 18 Ga. Frame 21/2" x 1" x 12 Ga. Steel : Model EFG Tube: 13/ O.D. x 18 ga. galvanized steel Axle: 5/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 21/2" x 1" x ga. painted steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate standard; Hook & Rod optional Capacity: Weight of section must be included Maximum distributed live load: Frame 36 Lbs./Ft. on 10' support centers 260 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity 9F EFG15B F EFG03B F EFG45B15 9F EFG06B F EFG15B F EFG45B07 9F EFG15B F EFG03B F EFG45B21 9F EFG06B F EFG15B F EFG03B 61 9F EFG45B 9F EFG06B F EFG15B F EFG03B10 9F EFG45B10 9F EFG03B13 9F EFG45B13 1 9F EFG06B13 9F EFG15B F EFG03B F EFG06B F EFG15B F EFG03B F EFG45B22 9F EFG06B F EFG06B F EFG15B F EFG03B F EFG45B F EFG06B Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 1F EFG15B07 1F EFG03B07 1F EFG15B10 1F EFG03B10 1F EFG15B13 1F EFG03B13 1F EFG15B15 1F EFG03B15 1F EFG15B 1F EFG03B 1F EFG15B19 1F EFG03B19 1F EFG15B21 1F EFG03B Wt. 45 Wt F EFG15B F EFG03B Wt. 45 Wt Replace " " in with "90" for 90 degree or "45" for 45 degree. 31 STRAIGHT SECTIONS 5' & 10' LENGTHS

32 GRAVITY ROLLER Tube 13/ Dia. x Ga. Frame 21/2" x 1" x 12 Ga. Steel CFG : Model CFG Tube: 13/ O.D. x ga. galvanized steel Axle: 5/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 21/2" x 1" x ga. plain steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate standard; Hook & Rod optional Capacity: Weight of section must be included Maximum distributed live load: Frame 36 Lbs./Ft. on 10' support centers 260 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS F CFG06B F CFG15B F CFG45B21 9F CFG06B F CFG15B F CFG45B15 9F CFG06B F CFG15B F CFG03B F CFG45B22 9F CFG06B F CFG06B F CFG15B F CFG03B F CFG45B 9F CFG06B F CFG15B F CFG06B F CFG45B F CFG03B13 9F CFG03B21 9F CFG03B15 9F CFG03B07 9F CFG15B21 9F CFG15B15 9F CFG15B07 9F CFG45B10 9F CFG03B10 9F CFG45B F CFG03B F CFG45B F CFG06B Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 1F CFG15B07 1F CFG03B07 1F CFG15B10 1F CFG03B10 1F CFG15B13 1F CFG03B13 1F CFG15B15 1F CFG03B15 1F CFG15B 1F CFG03B 1F CFG15B19 1F CFG03B19 1F CFG15B21 1F CFG03B Wt. 45 Wt F CFG15B F CFG03B Replace " " in with "90" for 90 degree or "45" for 45 degree. 32 Wt. 45 Wt

33 GRAVITY ROLLER CG Tube 13/ Dia. x Ga. Frame 31/2" x 13/ x 11 Ga. Steel s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS F CG15B F CG03B31 10F CG06B F CG15B F CG03B F CG06B F CG15B F CG15B F CG03B19 10F CG06B F CG15B F CG06B10 10F CG15B13 10F CG15B07 10F CG03B07 10F CG03B F CG06B F CG15B F CG03B F CG06B F CG15B F CG03B F CG03B36 10F CG06B F CG06B F CG06B36 10F CG15B F CG15B F CG03B F CG03B13 10F CG03B F CG06B F CG06B F CG15B F CG15B F CG03B F CG06B F CG06B F CG15B F CG15B F CG03B F CG06B F CG03B 10F CG03B F CG06B Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 3F CG15B07 3F CG03B07 3F CG15B10 3F CG03B10 3F CG15B13 3F CG03B13 3F CG15B15 3F CG03B15 3F CG15B 3F CG03B 3F CG15B17 3F CG03B17 3F CG15B19 3F CG03B19 3F CG15B21 3F CG03B Wt. 45 Wt F CG15B F CG03B F CG15B F CG03B F CG15B F CG03B F CG15B F CG03B F CG15B F CG03B F CG15B F CG03B F CG15B F CG03B Wt. 45 Wt Replace " " in with "90" for 90 degree or "45" for 45 degree. 33 : Model CG Tube: 13/ O.D. x ga. galvanized steel Axle: 7/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 31/2" x 13/ x 11" ga. painted steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers

34 GRAVITY ROLLER Tube 1.9" Dia. x Ga. KG Frame 31/2" x 13/ x 11 Ga. Steel : Model KG Tube: 1.9" O.D. x ga. galvanized steel Axle: 7/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 31/2" x 13/ x 11" ga. painted steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS Wt.10' Wt.10' F KG03B F KG45B F KG03B F KG45B36 10F KG06B F KG06B F KG03B F KG03B F KG45B22 10F KG06B F KG06B22 10F KG03B F KG03B F KG45B23 10F KG06B F KG03B F KG06B15 10F KG03B Wt.10' F KG06B F KG03B F KG45B F KG06B F KG03B F KG45B F KG06B F KG06B F KG03B F KG03B F KG45B F KG45B F KG06B F KG06B F KG03B F KG03B F KG45B F KG45B F KG06B F KG06B F KG06B F KG03B F KG03B F KG03B F KG45B F KG45B F KG06B F KG06B F KG06B F KG03B F KG03B F KG45B F KG06B F KG03B07 10F KG45B07 10F KG45B10 10F KG45B13 10F KG45B15 10F KG45B 10F KG45B17 10F KG45B F KG06B Wt. 45 Wt. 90 Wt. 45 Wt. 90 3F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B F KG03B51 51" Replace " " in with "90" for 90 degree or "45" for 45 degree " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 3

35 GRAVITY ROLLER KA Tube 1.9" Dia. x Ga. Frame 31/2" x 13/ x 1/ Ga. Al : Model KA Tube: 1.9" O.D. x ga. aluminum Axle: 7/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 31/2" x 13/ x 1/ ga. aluminum channel Crossbraces: x x 1/ aluminum angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 45 Lbs./Ft. on 10' support centers 420 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity (lb.) F KA03B F KA45B36 4F KA06B F KA03B22 53 (lb.) F KA03B F KA45B21 4F KA06B F KA03B F KA03B07 4F KA45B07 (lb.) F KA06B F KA03B F KA45B F KA45B F KA06B F KA06B F KA06B F KA03B F KA03B F KA03B F KA45B F KA45B F KA45B F KA06B F KA06B F KA06B F KA03B F KA03B F KA03B F KA45B F KA45B F KA45B F KA06B F KA06B F KA06B F KA03B F KA03B F KA03B F KA45B F KA45B F KA45B F KA06B F KA06B F KA06B F KA03B F KA03B F KA03B F KA45B F KA45B F KA06B F KA06B F KA06B F KA03B F KA03B F KA45B F KA06B F KA45B 4F KA45B17 4F KA45B F KA06B " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES Wt. 45 Wt. 90 Wt. 45 Wt. 90 4F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B F KA03B51 51" 45 Replace " " in with "90" for 90 degree or "45" for 45 degree. 35 STRAIGHT SECTIONS 5' & 10' LENGTHS

36 GRAVITY ROLLER Tube 1.9" Dia. x Ga. Frame 31/2" x 13/ x 11 Ga. Steel K : Model K Tube: 1.9" O.D. x ga. plain steel Axle: 7/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 31/2" x 13/ x 11" ga. painted steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS Wt.10' F K03B F K45B21 10F K06B F K03B F K06B10 10F K03B13 Wt.10' Wt.10' F K03B F K45B F K06B F K06B F K03B F K03B F K45B F K45B F K06B F K06B F K03B F K03B F K45B F K45B F K06B F K06B F K06B F K03B F K03B F K03B F K45B F K45B F K06B F K06B F K06B F K03B F K03B F K03B F K45B F K45B F K06B F K06B F K06B F K03B F K03B F K03B F K45B F K45B F K06B F K06B F K06B F K03B F K03B F K45B F K06B F K03B07 10F K45B07 10F K45B10 10F K45B13 10F K45B15 10F K45B 10F K45B17 10F K45B F K06B Wt. 45 Wt. 90 Wt. 45 Wt. 90 3F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B F K03B51 51" Replace " " in with "90" for 90 degree or "45" for 45 degree " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 3

37 GRAVITY ROLLER DG Tube 1.9" Dia. x 12 Ga. Frame 31/2" x 13/ x 11 Ga. Steel : Model DG Tube: 1.9" O.D. x 12 ga. galvanized steel Axle: 7/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 31/2" x 13/ x 11 ga. painted steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity Wt.10' Wt.10' F DG03B F DG45B F DG06B F DG06B F DG03B F DG03B F DG45B F DG45B F DG06B F DG06B F DG03B F DG03B F DG45B F DG45B F DG06B F DG06B F DG06B F DG03B F DG03B F DG03B F DG45B F DG45B F DG06B F DG06B F DG06B F DG03B F DG03B F DG03B F DG45B F DG45B F DG06B F DG06B F DG06B F DG06B F DG03B F DG03B F DG45B F DG45B F DG06B F DG06B F DG06B F DG03B F DG03B F DG45B F DG06B Wt.10' F DG03B F DG45B21 10F DG06B F DG03B F DG06B10 10F DG03B13 10F DG03B07 10F DG45B07 10F DG45B10 10F DG45B13 10F DG45B15 10F DG45B 10F DG06B17 10F DG45B F DG06B " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES Wt. 45 Wt. 90 Wt. 45 Wt. 90 3F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B F DG03B51 51" Replace " " in with "90" for 90 degree or "45" for 45 degree. 37 STRAIGHT SECTIONS 5' & 10' LENGTHS

38 GRAVITY ROLLER Tube 1.9" Dia. x 9 Ga. Frame 31/2" x 13/ x 11 Ga. Steel KD : Model KD Tube: 1.9" O.D. x 9 ga. plain steel Axle: 7/1 hex steel Bearing: Light oil, press fit Axle Retention: Spring retained Frame: 31/2" x 13/ x 11" ga. painted steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS (Lbs.) Wt.10' (Lbs.) Wt.10' (Lbs.) Wt.10' F KD03B F KD45B F KD03B F KD45B F KD06B F KD06B F KD06B F KD03B F KD03B F KD03B F KD45B F KD45B F KD06B F KD06B F KD06B F KD03B F KD03B F KD03B F KD45B F KD45B F KD06B F KD06B F KD06B F KD03B F KD03B F KD03B F KD45B F KD45B F KD06B F KD06B F KD06B F KD03B F KD03B F KD03B F KD45B F KD45B F KD06B F KD06B F KD06B F KD06B F KD03B F KD03B F KD45B F KD45B F KD06B F KD06B F KD06B F KD03B F KD03B F KD45B F KD06B F KD03B07 10F KD45B07 10F KD45B10 10F KD45B13 10F KD45B15 10F KD45B 10F KD06B17 10F KD45B F KD06B Wt. 45 Wt. 90 Wt. 45 Wt. 90 3F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B F KD03B51 51" Replace " " in with "90" for 90 degree or "45" for 45 degree " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 3

39 GRAVITY ROLLER U Tube 21/2" Dia. x 14 Ga. Frame 31/2" x 13/ x 11 Ga. Steel : Model U Tube: 21/2" O.D. x 14 ga. plain steel Axle: 7/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: 31/2" x 13/ x 11 ga. painted steel channel Crossbraces: x x 1/ steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity F U03B F U45B F U06B F U06B F U03B F U03B F U45B F U45B F U06B F U06B F U03B F U03B F U45B F U45B F U06B F U06B F U06B F U03B F U03B F U03B F U45B F U45B F U06B F U06B F U06B F U03B F U03B F U03B F U45B F U45B F U06B F U06B F U06B F U06B F U03B F U03B F U45B F U45B F U06B F U06B F U06B F U03B F U03B F U45B F U06B F U03B F U45B21 10F U06B F U03B F U06B10 10F U03B13 10F U03B07 10F U45B07 10F U45B10 10F U45B13 10F U45B15 10F U45B 10F U06B17 10F U45B F U06B " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES Wt. 45 Wt. 90 Wt. 45 Wt. 90 3F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B F U03B51 51" Replace " " in with "90" for 90 degree or "45" for 45 degree. 39 STRAIGHT SECTIONS 5' & 10' LENGTHS

40 GRAVITY ROLLER Tube 21/2" Dia. x 11 Ga. Frame x x 7 Ga. Steel S : Model S Tube: 21/2" O.D. x 11 ga. plain steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: x x ga. painted steel channel Crossbraces: 13/ x 13/ x 3/1 steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 2 Lbs./Ft. on 10' support centers 1,050 Lbs./Ft. on 5' support centers s Set low s Set High (Standard) Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS F S03B F S45B F S06B F S06B F S03B F S03B F S45B F S45B F S06B F S06B F S03B F S03B F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S03B F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S03B F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S03B " F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S45B F S06B F S03B F S45B21 14F S06B F S03B F S06B10 14F S03B13 14F S03B07 14F S45B07 14F S45B10 14F S45B13 14F S45B15 14F S45B 14F S45B17 14F S45B F S06B Wt. 45 Wt. 90 Wt. 45 Wt F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B51 51" 214 Replace " " in with "90" for 90 degree or "45" for 45 degree " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 3

41 GRAVITY ROLLER SG Tube 21/2" Dia. x 11 Ga. Frame x x 7 Ga. Steel : Model SG Tube: 21/2" O.D. x 11 ga. galvanized steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: x x 7 ga. painted steel channel Crossbraces: 13/ x 13/ x 3/1 steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 2 Lbs./Ft. on 10' support centers 1, 050 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity F SG03B F SG45B36 14F SG06B F SG03B F SG45B F SG06B F SG03B F SG45B23 14F SG06B F SG03B F SG06B15 14F SG03B F SG03B F SG45B21 14F SG06B F SG03B F SG06B10 14F SG03B F SG06B F SG03B F SG45B F SG06B F SG03B F SG45B F SG06B F SG06B F SG03B F SG03B F SG45B F SG45B F SG06B F SG06B F SG03B F SG03B F SG45B F SG45B F SG06B F SG06B F SG06B F SG03B F SG03B F SG03B F SG45B F SG45B F SG06B F SG06B F SG06B F SG03B F SG03B F SG45B F SG06B F SG03B07 14F SG45B07 14F SG45B10 14F SG45B13 14F SG45B15 14F SG45B 14F SG45B17 14F SG45B F SG06B " Replace " " in with "05" for 5' or " for 10' length. CURVED SECTIONS 45 & 90 DEGREES Wt. 45 Wt. 90 Wt. 45 Wt F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B51 51" 214 Replace " " in with "90" for 90 degree or "45" for 45 degree. 41 STRAIGHT SECTIONS 5' & 10' LENGTHS

42 GRAVITY ROLLER Tube 25/ Dia. x 7 Ga. Frame x x 7 Ga. Steel T : Model T Tube: 25/ O.D. x 7 ga. plain steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: x x ga. painted steel channel Crossbraces: 13/ x 13/ x 3/1 steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 2 Lbs./Ft. on 10' support centers 1,050 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGTHS F T03B F T45B21 14F T06B F T03B F T06B10 14F T03B F T03B F T45B36 14F T06B F T03B F T45B F T06B F T03B F T45B23 14F T06B F T03B F T03B07 14F T45B07 14F T45B10 14F T45B13 14F T45B F T06B F T03B F T45B F T06B F T03B F T45B F T06B F T06B F T03B F T03B , F T45B F T45B F T06B F T06B F T06B F T03B F T03B F T03B , F T45B F T45B F T45B F T06B F T06B F T06B F T03B F T03B F T03B , F T45B F T45B F T45B51 14F T06B F T06B F T06B51 14F T03B F T03B F T45B F T06B F T45B F T06B19 3 Wt. 45 Wt. 90 Wt. 45 Wt F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B51 51" 214 Replace " " in with "90" for 90 degree or "45" for 45 degree " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 4

43 GRAVITY ROLLER S Tube 21/2" Dia. x 11 Ga. Frame x 5.4 Lbs. Structural Steel : Model S Tube: 21/2" O.D. x 11 ga. plain steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: x 5.4 Lbs. structural painted steel channel Crossbraces: 13/ x 13/ x 3/1 steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 0 Lbs./Ft. on 10' support centers 1,550 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity F S03B F S45B21 5F S06B F S03B F S06B10 5F S03B F S03B F S45B F S06B F S06B F S03B F S03B F S45B F S45B F S06B F S06B F S03B F S03B F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S03B F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S03B F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S03B F S45B F S45B F S06B F S06B F S06B F S03B F S03B F S45B F S06B F S03B07 5F S45B07 5F S45B10 5F S45B13 5F S45B15 5F S45B 5F S45B17 5F S45B F S06B " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES Wt. 45 Wt. 90 Wt. 45 Wt. 90 5F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B F S03B51 51" Replace " " in with "90" for 90 degree or "45" for 45 degree. 43 STRAIGHT SECTIONS 5' & 10' LENGTHS

44 GRAVITY ROLLER Tube 21/2" Dia. x 11 Ga. Frame x 5.4 Lbs. Structural Steel SG : Model SG Tube: 21/2" O.D. x 11 ga. galvanized steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: x 5.4 Lbs. structural painted steel channel Crossbraces: 13/ x 13/ x 3/1 steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 0 Lbs./Ft. on 10' support centers 1,550 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity STRAIGHT SECTIONS 5' & 10' LENGHTS F SG03B F SG45B F SG03B F SG45B36 5F SG06B F SG06B F SG03B F SG03B F SG45B22 5F SG06B F SG06B22 5F SG03B F SG03B F SG45B23 5F SG06B F SG03B15 1 5F SG06B15 5F SG03B F SG06B F SG03B F SG45B F SG06B F SG03B F SG45B F SG06B F SG06B F SG03B F SG03B F SG45B F SG45B F SG06B F SG06B F SG03B F SG03B F SG45B F SG45B F SG06B F SG06B F SG06B F SG03B F SG03B F SG03B F SG45B F SG45B F SG06B F SG06B F SG06B F SG03B F SG03B F SG45B F SG06B F SG03B07 5F SG45B07 5F SG45B10 5F SG45B13 5F SG45B15 5F SG45B 5F SG45B17 5F SG45B F SG06B Wt. 45 Wt. 90 Wt. 45 Wt. 90 5F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B F SG03B51 51" 222 Replace " " in with "90" for 90 degree or "45" for 45 degree. 4 and above are only available in 45 degree curves (Two 45 degrees = One 90 degree) " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES 3

45 GRAVITY ROLLER T Tube 25/ Dia. x 7 Ga. Frame x 5.4 Lbs. Structural Steel : Model T Tube: 25/ O.D. x 7 ga. plain steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Frame: x 5.4 Lbs. structural painted steel channel Crossbraces: 13/ x 13/ x 3/1 steel angle Coupling: Butt plate Capacity: Weight of section must be included Maximum distributed live load: Frame 0 Lbs./Ft. on 10' support centers 1,550 Lbs./Ft. on 5' support centers s Set High (Standard) s Set low Refer to models for capacity F T03B F T45B21 5F T06B F T03B F T06B10 5F T03B13 5F T03B07 5F T45B07 5F T45B10 5F T45B F T03B F T45B36 5F T06B F T03B F T45B F T06B F T03B F T06B F T03B F T45B F T06B F T03B F T45B F T45B F T06B F T06B F T03B F T03B F T03B F T45B F T45B F T06B F T06B F T03B F T03B F T03B F T45B F T45B F T06B F T06B F T06B F T03B F T03B F T03B F T45B17 1 5F T06B15 5F T45B 2 5F T06B13 5F T45B F T45B F T45B51 5F T06B F T06B F T06B51 5F T03B F T03B F T45B F T06B F T45B19 1 5F T06B " Replace " " in with "05" for 5' or " for 10' length. CURVE SECTIONS 45 & 90 DEGREES Wt. 45 Wt. 90 Wt. 45 Wt. 90 5F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B F T03B51 51" 277 Replace " " in with "90" for 90 degree or "45" for 45 degree. 45 STRAIGHT SECTIONS 5' & 10' LENGTHS

46 REPLACEMENT ROLLERS s General Information The following information is intended to guide you through the proper application and selection of conveyor rollers. For specific rollers not listed in this catalogue contact a sales representative at Ashland Conveyor Products. or Between Frame Dimension The length of conveyor rollers is normally described in terms of, the dimension between the frame or between the rails of the conveyor. Diameter and Gauge Replacement s The tube diameter and gauge are required when specifying a roller. The diameter is the outside diameter of the tubing and the gauge is the wall thickness of the tubing. The following diameters and gages are Ashland Conveyor Products standards. Also shown are tube materials and shaft size. MODEL TUBE DIAMETER TUBE MATERIAL TUBE GAGE TUBE WALL THICKNESS SHAFT SIZE (Plain Steel) B 3/ Plain Steel 20 ga..035" 1/ Round EG 13/ Galvanized Steel 18 ga..049" 1/ Round EA 13/ Aluminum 18 ga..049" 1/ Round EFG 13/ Galvanized Steel 18 ga..049" 5/1 Hex EFA 13/ Aluminum 18 ga..049" 5/1 Hex CFG 13/ Galvanized Steel ga..065" 5/1 Hex CG 13/ Galvanized Steel ga..065" 7/1 Hex K 1.9" Plain Steel ga..065" 7/1 Hex KG 1.9" Galvanized Steel ga..065" 7/1 Hex KA 1.9" Aluminum ga..065" 7/1 Hex DG 1.9" Galvanized Steel 12 ga..109" 7/1 Hex KD 1.9" Plain Steel 9 ga..14 7/1 Hex U 21/2" Plain Steel 14 ga..08 7/1 Hex S 21/2" Plain Steel 11ga..120" 11/1 Hex SG 21/2" Galvanized Steel 11ga..120" 11/1 Hex T 25/ Plain Steel 7 ga..180" 11/1 Hex Shaft Sizes (Full Scale) Bearings 11/1 Hex 7/1 Hex 5/1 Hex 1/ Round Standard roller construction utilizes commercial grade (also known as non precision ) bearings. Semiprecision and precision bearings are also available. Standard bearing lubrication is light oil; however, grease packed 46

47 REPLACEMENT ROLLERS General Information is also available. Generally light oil lubrication is used for gravity applications as it rotates more easily. Grease packed is normally used for power conveyor applications or harsh environments. BEARING CONSTRUCTION LUBRICATION SPEED RATING LOAD RATING Commercial Light Oil or Grease Packed Up to 200 RPM Low Semiprecision Light Oil or Grease Packed Up to 1200 RPM Medium Precision (ABEC 1) Grease Packed Up to 2000 RPM High Capacity capacities are calculated to CEMA standards. The capacity is limited to the bearing capacity, shaft deflection, tube deflection, or tube strength. Refer to specific roller tables for roller capacities. Axle Construction Spring retained axle rollers are Ashland Conveyor Products standard construction. Spring retained axle rollers contain a spring that is captured between one of the bearings and a dimple on the shaft. When pushed on one end the shaft will slide through the roller allowing for insertion into the frame. Replacement s Pin retained rollers contain no spring or dimples to retain the shaft. Instead, the shaft is drilled on each end for a retaining pin. Once a roller is placed in a frame the retaining pins are inserted. Pin retained rollers must be specified at the time of quoting and ordering. Sprocketed s Sprocketed rollers are used for chain driven live roller conveyors. A typical arrangement is illustrated below. Standard construction includes grease packed and sealed bearings. Can be supplied as spring or pin retained. Length measurement should be from bearing hub to bearing hub. 47

48 REPLACEMENT ROLLERS B 3/ Dia. x 20 Ga. with 1/ Round Axle Model B Replacement s Tube: 3/ O.D. x 20 ga. plain steel Axle: 1/ diameter steel Bearing: Light oil, press fit Axle Retention: Spring retained Weight:.06 + (.04 x ) Shaft Length: +11/2 Wt. Capacity B B B09 9" B B11 11" B B B B B B B B B20 20" B B Shorter, longer, and inbetween 's available. EG 13/ Dia. x 18 Ga. with 1/ Round Axle Model EG Tube: 13/ O.D. x 18 ga. galvanized steel Axle: 1/ diameter steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight:.14 + (.07 x ) Shaft Length: +7/8 Shorter, longer, and inbetween 's available. 48 Wt. Capacity EG07.63 EG08.71 EG09 9".78 EG10.85 EG11 11" EG EG EG EG EG EG EG EG EG20 20" EG EG

49 REPLACEMENT ROLLERS EA 13/ Dia. x 18 Ga. with 1/ Round Axle Model EA Tube: 13/ O.D. x 18 ga. aluminum Axle: 1/ diameter steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight:. + (.04 x ) Shaft Length: +7/8 Wt. Capacity EA07.39 EA08.43 EA09 9".46 EA10.49 EA11 11" EA EA EA EA EA EA EA EA EA20 20" EA EA EFG 13/ Dia. x 18 Ga. with 5/1 Hex Axle Model EFG Tube: 13/ O.D. x 18 ga. galvanized steel Axle: 5/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight:.25 + (.08 x ) Shaft Length: +11/ Wt. Capacity EFG07.83 EFG08.91 EFG09 9".99 EFG EFG11 11" 1. EFG EFG EFG EFG EFG EFG EFG EFG EFG20 20" 1.89 EFG EFG Shorter, longer, and inbetween 's available. ASHLAND Replacement s Shorter, longer, and inbetween 's available.

50 REPLACEMENT ROLLERS EFA 13/ Dia. x 18 Ga. with 5/1 Hex Axle Model EFA Tube: 13/ O.D. x 18 ga. aluminum Axle: 5/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight:.28 + (.04 x ) Replacement s Shaft Length: +11/ Wt. Capacity EFA07.59 EFA08.63 EFA09 9".68 EFA10.72 EFA11 11".77 EFA12.81 EFA EFA EFA15. EFA 1.99 EFA EFA EFA EFA20 20" 1. EFA EFA Shorter, longer, and inbetween 's available. CFG 13/ Dia. x Ga. with 5/1 Hex Axle Model CFG Tube: 13/ O.D. x ga. galvanized steel Axle: 5/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight:.24 + (.10 x ) Shaft Length: +11/ Shorter, longer and inbetween 's available. 50 Wt. Capacity CFG CFG CFG09 9" 1.14 CFG CFG11 11" CFG CFG CFG CFG CFG CFG CFG CFG CFG20 20" CFG CFG

51 REPLACEMENT ROLLERS CG 13/ Dia. x Ga. with 7/1 Hex Axle Model CG Tube: 13/ O.D. x ga. galvanized steel Axle: 7/1 hex steel Bearing: Light oil, swaged CG07 Axle Retention: Spring retained CG08 CG09 Weight:.26 + (.12 x ) Shaft Length: +15/ Wt. Capacity CG CG CG CG CG CG CG20 20" CG CG CG CG CG CG CG CG Wt. Capacity CG29 29" CG " CG " CG32 32" CG CG CG11 11" CG CG CG35 35" CG CG K 1.9" Dia. x Ga. with 7/1 Hex Axle Model K Wt. Capacity K K K K K K K K20 20" 3.48 K K K K K Tube: 1.9" O.D. x ga. plain steel Axle: 7/1 hex steel Bearing: Light oil, swaged K07 Axle Retention: Spring retained K08 Weight:.42 + (.15 x ) K09 Shaft Length: +19/ K K31 5. Shorter, longer, and inbetween 's available. Wt. Capacity K K K " 1.80 K K K K11 11" 2.10 K K51 51" K Replacement s Shorter, longer and inbetween 's available.

52 REPLACEMENT ROLLERS KG 1.9" Dia. x Ga. with 7/1 Hex Axle Model KG Wt. Capacity KG Tube: 1.9" O.D. x ga. galvanized steel Axle: 7/1 hex steel Bearing: Light oil, swaged KG07 Axle Retention: Spring retained KG08 Weight:.42 + (.15 x ) KG09 Replacement s Shaft Length: +19/ Shorter, longer, and inbetween 's available. KG KG KG KG KG KG KG20 20" 3.48 KG KG KG KG KG KG KG31 5. Wt. Capacity KG KG KG " 1.80 KG KG KG KG11 11" 2.10 KG KG KG51 51" KA 1.9" Dia. x Ga. with 7/1 Hex Axle Model KA Tube: 1.9" O.D. x ga. aluminum Axle: 7/1 hex steel Bearing: Light oil, swaged KA07 Axle Retention: Spring retained KA08 Weight:.45 + (.08 x ) KA09 Shaft Length: +19/ KA10 Shorter, longer and inbetween 's available. 52 Wt. Capacity KA KA KA KA KA KA KA KA20 20" 2.13 KA KA KA KA KA KA KA Wt. Capacity KA KA KA " 1.20 KA KA " KA11 11" 1.37 KA47 KA KA51

53 REPLACEMENT ROLLERS DG 1.9" Dia. x 12 Ga. with 7/1 Hex Axle Model DG Wt. Capacity DG DG DG DG DG DG DG DG20 20" 4.78 DG DG DG DG DG Tube: 1.9" O.D. x 12 ga. galvanized steel Axle: 7/1 hex steel Bearing: Light oil, swaged DG07 Axle Retention: Spring retained DG08 Weight:.37 + (.22 x ) DG09 DG DG Shaft Length: +19/ Wt. Capacity 1.91 DG DG " 2.35 DG39 DG DG DG11 11" 2.79 DG DG DG51 51" KD 1.9" Dia. x 9 Ga. with 7/1 Hex Axle Model KD Tube: 1.9" O.D. x 9 ga. plain steel Axle: 7/1 hex steel KD07 Bearing: Light oil, press fit KD08 Axle Retention: Spring retained KD09 9" Weight:.40 + (.28 x ) KD10 Shaft Length: +15/ KD11 11" Shorter, longer, and inbetween 's available. KD12 KD13 1 Wt. Capacity KD KD KD KD KD KD KD20 20" KD KD KD KD KD KD Wt. Capacity KD KD KD KD KD KD KD KD51 51" Replacement s Shorter, longer and inbetween 's available. DG33

54 REPLACEMENT ROLLERS U 21/2" Dia. x 14 Ga. with 7/1 Hex Axle Model U Wt. Capacity U U U U U U U20 20" U U U U U U Replacement s Tube: 21/2" O.D. x 14 ga. plain steel Axle: 7/1 hex steel U07 Bearing: Light oil, swaged U08 Axle Retention: Spring retained U09 Weight:.65 + (.23 x ) Wt. Capacity U U U " U Shaft Length: +15/ U U U11 11" U Shorter, longer, and inbetween 's available. U U U U51 51" S 21/2" Dia. x 11 Ga. with 11/1 Hex Axle Model S Tube: 21/2" O.D. x 11 ga. plain steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight: (.37 x ) Shaft Length: +13/4 Shorter, longer and inbetween 's available. 54 Wt. Capacity S S S20 20" 8.48 S S S S S S S S Wt. Capacity S S S S S S09 9" 4.41 S S S S11 11" 5.15 S51 51" S S55 55" S S59 59" S S S S S S71 71" S S75 75"

55 REPLACEMENT ROLLERS SG 21/2" Dia. x 11 Ga. with 11/1 Hex Axle Model SG Tube: 21/2" O.D. x 11 ga. galvanized steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight: (.37 x ) Shaft Length: +13/4 T Tube: 25/ O.D. x 7 ga. plain steel Axle: 11/1 hex steel Bearing: Light oil, swaged Axle Retention: Spring retained Weight:.93 + (.51 x ) Shaft Length: +13/4 Shorter, longer, and inbetween 's available. Wt. Capacity SG SG SG SG20 20" 8.48 SG SG SG SG SG SG SG SG Wt. Capacity SG36 SG SG SG SG SG SG09 9" 4.41 SG SG SG51 51" SG11 11" 5.15 SG55 55" SG SG59 59" SG SG SG SG SG SG71 71" SG SG75 75" / Dia. x 7 Ga. with 11/1 Hex Axle Model T Wt. Capacity T T T20 20" T T T T T T T31.66 T Wt. Capacity T T T T T T09 9" 5.50 T T T T11 11" 6.51 T51 51" T T55 55" T T59 59" T T T T T T71 71" T T75 75" Replacement s Shorter, longer and inbetween 's available.

56 Supports Supports Tripod Model DT Adjustable height tripod stands may be used with straight or curved sections of skatewheel and 11F roller conveyors. They are easily adjustable and very portable. Supports TBar: 11/ O.D. x 11 ga. steel Legs: 12 ga. steel Capacity: 400 Lbs. Packaging: Shipped unassembled 56 OAW of Conveyor TBar Width Wt. (Lbs.) Height Range Top of Stand Top of Wheel and (12F/11F) DT12ST DT12S25T DT12S42T60 42" 60" DT15ST DT15S25T DT15S42T60 42" 60" DT18ST DT18S25T DT18S42T60 42" 60" DT24ST DT24S25T DT24S42T60 42" 60" " 12.5" " 21.5"

57 Supports Light Duty HStand Model H15 The H lb. capacity HStand support may be used with gravity skatewheel, gravity roller conveyor (21/2 and 31/2 frames), and power belt conveyor. The hstand is used for permanent, as opposed to portable, conveyor installations. Single legs are available for curves if desired. Upper Legs: 12 ga. steel Lower Legs: 12 ga. steel Pivot Brackets: 12 ga. steel Crossbraces: x x 1/ steel angle bolted Floor Pad: 3/1 steel Widths: Standard 's include: 7, 10, 13, 15, 17, 19, 21, 22, 23, 25, 31, 33, 36, 39, 43, 47, 51 Other 's available Capacity: 1, 500 Lbs. Packaging: Shipped unassembled, factory assembly additional charge Height Range Top of Stand Top of Wheel Skatewheel Top of B Top of EA, EG, EFA, EFG, CFG Wt. (Lbs.) H15M25B 19.5" 223/ to 337/ 211/ to 325/ 221/ to 333/ 12 + (.3 x ) H15M37B 4 337/ to 457/ 325/ to 445/ 333/ to 453/ 15 + (.3 x ) H15M49B 4 55" 457/ to 577/ 445/ to 565/ 453/ to 573/ 18 + (.3 x ) Height Range Top of Stand Top of CG Top of KA, K, KG, DG, KD Top of U Wt. (Lbs.) H15M25B 19.5" 231/ to 3 233/ to 343/ 235/ to 351/ 12 + (.3 x ) H15M37B 4 3 to 461/2" 343/ to 463/ 351/ to 471/ 15 + (.3 x ) H15M49B 4 55" 461/2" to 581/2" 463/" to 583/ 471/ to 591/ 18 + (.3 x ) Supports Replace " " in with Single Leg Wt. (Lbs.) H15M H15M H15M

58 Supports Medium Duty HStand Model H The 3H 00 lb. capacity HStand support may be used with gravity skatewheel, gravity roller conveyor (21/2 and 31/2 frames), and power belt conveyor while the 4H may be used with gravity roller conveyor (4 frames). The HStand is used for permanent, as opposed to portable, conveyor installations. Single legs are available for curves if desired. Upper Legs: 11 ga. steel Lower Legs: 11 ga. steel Pivot Brackets: 12 ga. steel Crossbraces: 21/2" x 1" x 12 ga. steel channel Floor Pad: 3/1 steel Widths: Standard 's include: 7, 10, 13, 15, 17, 19, 21, 22, 23, 25, 31, 33, 36, 39, 43, 47, 51 Other 's available Capacity: HM08: 2,500 Lbs. All Others: 3,000 Lbs. Packaging: Shipped unassembled, factory assembly additional charge Supports Height Range Top of Stand Top of CG Top of K, KA, KG, DG, KD Top of U Top of S, SG, T Wt. (Lbs.) _HM08B 61/ 91/2" 93/ to 1 93/ to 135/ 101/ to 135/ 103/ to 133/ 8 + (.13 x ) _HM11B 91/2" 121/ 1 to 153/ 133/ to 3/ 135/ to 3/ 133/ to 1/2" 9 + (.13 x ) _HM14B 121/ 1 153/ to 205/ 3/ to 211/ 3/ to 211/ 1/2" to 211/ 11 + (.13 x ) _HM22B 1/2" 261/ 20" to 293/ 205/ to 3/ 205/ to 3/ 203/ to 1/2" 15 + (.25 x ) _HM31B 253/ 363/ 293/ to 401/ 295/ to 403/ 297/ to 407/ " to 41" 19 + (.25 x ) _HM41B 351/ 461/ 387/ to 493/ 393/ to 503/ 393/ to 503/ 391/2" to 501/2" 22 + (.25 x ) _HM51B 451/ 561/ 487/ to 593/ 493/ to 603/ 493/ to 603/ 491/2" to 601/2" 26 + (.38 x ) _HM60B 543/ 6 583/ to 695/ 585/ to 701/ 587/ to 701/ 59" to 701/ + (.38 x ) Replace "_" in with 3 or 4 (frame size) Replace " " in with Single Leg Wt. (Lbs.) HM HM HM HM HM HM41 11 HM51 13 HM

59 Supports Heavy Duty HStand Model H50 The H lb. capacity HStand support may be used with gravity roller conveyor (4 frames). The hstand is used for permanent, as opposed to portable, conveyor installations. Single legs are available for curves if desired. Upper Legs: x 4.1 Lb. structural steel Lower Legs: x 5.4 Lb. structural steel Pivot Brackets: 3/1 x 2" x 2" steel angle Crossbraces: x x 3/1 steel angle Floor Pad: 2" x 2" x 3/1 steel angle Widths: Standard 's include: 7, 10, 13, 15, 17, 19, 21, 22, 23, 25, 31, 33, 36, 39, 43, 47, 51 Other 's available Capacity: 5,000 Lbs. Packaging: Shipped unassembled, factory assembly additional charge Height Range Top of Stand Top of S, SG, T Wt. (Lbs.) H50M10B 81/11" 115/ to 151/ 21 + (.15 x ) H50M12B 93/ 1 1 to 181/ 23 + (.15 x ) 12.2" 1/2" to 231/ 28 + (.3 x ) 1 281/2" 211/ to 323/ 35 + (.3 x ) H50M34B 261/2" 4 3/ to 453/ 47 + (.3 x ) H50M47B 391/2" 5 433/ to 583/ 57 + (.45 x ) Supports H50MB H50M23B Replace " " in with Single Legs Wt. (Lbs.) H50M10B 10 H50M12B 11 H50MB 13 H50M23B 17 H50M34B 23 H50M47B 27 59

60 Supports Multitier Model HMT Multitier supports provide support for multilevel conveyor runs. Multitier supports may be used with all gravity skatewheel and gravity roller conveyor. Kneebraces are included to provide extra stability. Assembly requried. Additional tiers availble, includes brackets and kneebraces. Legs: x x 7 ga. steel channel Crosspipe: 1" inside dia., schedule 40 Hat Bracket: 7 ga. steel Tiers: (2) tiers included Kneebraces: (2) pair of kneebraces included Capacity: 1, 250 Lbs. per tier 2, 500 Lbs. per stand Top of Tier Max Wt. (Lbs.) HMT22B 10 + ( x.3) HMT34B ( x.3) HMT46B ( x.3) HMT58B ( x.3) HMT70B 70" 26 + ( x.3) HMT82B 82" + ( x.3) HMTB " 34 + ( x.3) HMT106B ( x.3) HMTB Additional Tier 6 + ( x.15) Supports Replace " " in with 60

61 Supports Medium Duty Low Profile Support Model LP25 Legs: 11 ga. steel Pivot Brackets: 1" to 3. Mean Heights 3/1 x 2" x 2" angle 4. to Mean Heights 12 ga. steel Crossbraces: None Floor Pad: 3/1 steel Capacity: 2, 500 Lbs. All stands shipped as pairs. Mean Height Height Range Top of Stand Wt. (Lbs.) " 5/ 13/ " 17/ /1 43/ / 5" " 411/1 59/ /1 65/ Supports 4. Mean Heights 3. Mean Heights 1" 2" Mean Heights 61

62 Supports Kneebrace Kneebraces provide added structural support between the conveyor and floor support. Recommended for use with noseover units, supports with casters, or free standing conveyors. Kneebrace: x 3/1 painted steel Bracket: x x 1/ steel angle Length Wt. (Lbs.) Use Pt. No for Nose Over applications Above includes 2 sets of kneebraces, brackets, & fasteners Some field drilling may be needed Casters Supports Swivel Caster Rigid Caster Casters are available in 5" and diameter in either swivel or rigid style. The swivel has sidelocks. Use of casters in conveyor applications require 3, 000 Lb. floor supports and kneebraces. Capacity: 900 Lbs. 62 Wheel Dia. Height Style Swivel Radius Wt. (Lbs.) " 61/2" Swivel 41/ " 61/2" Rigid NA /2" Swivel 61/ /2" Rigid NA 8.2

63 Supports Ceiling Hanger Model CH Ceiling hangers provide a safe means of providing higher elevation than floor supports. Also floor space can more readily be utilized. Ceiling hangers may be used with all conveyors. Conveyor guarding is recommend for overhead applications. Crosspipe: 1" IPS schedule 40 Hat Bracket: 7 ga. steel Hanger Rods: 5/8 all thread, 8' long Capacity: 1, 250 Lbs. Wt. (Lbs.) CHB 20 + ( x.15) Replace " " in with. Supports 63

64 TELESCOPING Telescoping Conveyor General Information Ashland's Telescoping Conveyor is a durable, low maintenance product designed to reduce the time and effort required to hand load and unload trailers. Unlike "expanding" conveyors, the centerline distance between rollers remains unchanged at any extension. Also, each section is individually replaceable. There are two basic models in three widths and five lengths with a range of elevations and slopes. You may also choose between roller or skatewheel conveyor. Ease of operation is one of the reasons warehouse managers prefer Ashland Telescoping. Our unique design suspends the lower sections by ball bearings which glide inside the side channels of the section above. Telescoping The Legs are equipped with 5" diameter swivel casters. Casters with a diameter of are standard on 6 section telescopes and available as an option on others. Ashland Telescoping extend so easily that a 5 section unit with slope per 10' will extend itself on a smooth floor. To specify a telescoping conveyor you will need to know the following: Overall length or number of 10' sections High end (upper) elevation Required slope or low elevation Overall width Model (skatewheel or roller) 5" or diameter casters The package stop also serves as a handle to extend and retract the conveyor. The elevation/slope tables will aid in the selection process. Please note the slope must be a whole number (1" through per a 10' section). Durability is another reason our product is preferred. The main frame stringers are formed from 7 ga. steel plate. All other formed parts are either 10 ga. or structural steel. The The slope may vary from section to section; however, the slope must be constant or increase as you descend through the sections. The slope cannot decrease. legs are secured in place with 1/2" heat treated bolts. Our customers have testified that units have fallen from the dock and were put back into service without any repair. Durability and weight are synonymous in telescoping conveyors. Compare the weight of our product with other brands. 64 Telescopes ship fully assembled less the attachment of the transition sections and the safety stop bracket. Telescopes must be shipped via dedicated carrier, secured to trailer.

65 12' 12' Retracted Length 5" diameter diameter High End Elevation 20' Extended Length 13' 13' ' 3 14' 14' 40' 4 50' 5 14' 15' 5" Floor Lock Telescoping NA ' 60' 6 Swivel Casters Model 4B 2" Slope/10' Gravity Skatewheel or Conveyor Bed Extended Length (4 section) Section AA Skatewheel Conveyor O. F. O. F /4 Hinged Transition Sections 1 3/ O.D. x Ga. s on Retracted Length (4 section) 2 of Sections Extended/Retracted Lengths Package Stop Floor Lock Drop at each Transition Section AA Conveyor O. F. O. F /4 Low End Elevation TELESCOPING General Information 65

66 TELESCOPING General Information Elevation/Slope Tables 3 Section Units 2 Section Units High End Low End Section Inches/10' Section /2" 1 42" Section Inches/10' Section 2 Model T2A5 Elevation High End Low End /2" 1 40" /2" 2 3 T3A /2" /2" 3 40" 3 45" " 381/2" 4 49" " 3 52" 371/2" 5 52" 2 5 T2B5 T3B5 59" /2" 6 55" " 451/2" 6 61" Section Units 4 Section Units High End Low End Section Inches/10' Section /2" /2" /2" 2 42" 201/2" /2" 4 Section Inches/10' Section Model T4A5 2 3 Elevation Model T5A5 High End Low End 4 231/2" 421/2" 191/2" 421/2" 1 * 531/2" 201/2" 55" * * * * * /2" 4 51" " 251/2" /2" " 231/2" " 2 50" T4B5 6 Section Units Section Inches/10' Section Model 2 Elevation High End Low End " 231/2" 5 231/2" * /2" /2" /2" 59" 181/2" 65" 181/2" T6A8 T6B8 2 T5B5 Elevation 5 5 Telescoping Elevation Model T5C5 T5D " 3 59" 2 1. * Elevations not adjustable 2. The in the model following the letter "T" refers to the number of sections. The following number refers to model A, B, C, or D which determins high and low elevations. The last number refers to the caster diameter. 3. Substituting for 5" casters adds to all heights except 6 section units. 4. Six section units are only available with diameter casters.

67 TELESCOPING Skatewheel on All Sections The allskatewheel style is best suited to handle products that weigh an average of 10 lbs or less. A slope of per 10' should be adequate for proper flow. Options: 1. diameter casters for uneven floor/dock situations; adds to all heights. 2. Transition rollers on centers 3. Contact a representative for information concerning transition herringbone sections that automatically center packages. All Sections: 21/2" x 1" x 12 ga. galvanized steel frames with 115/1 diameter skatewheels. Main Frame: 10 ga. formed steel channel Transition Sections: 13/ x ga. galvanized steel rollers; centers. Casters: 5" diameter swivel standard up to 5 section units; diameter on 6 section units. Floor Locks: Foot activated standard on each end. Capacity: 140 Lbs. per foot. of 10' Sections Slope Per 10' Section Wheels Per Ft. "OF" Wt. (Lbs.) T2A518x 2 1" 384 T2B518x T3A518x 3 1" 626 T3B518x T4A518x 4 1" 868 T4B518x T5A518x 5 0" 1, 210 T5B518x 5 1, 210 T5C518x 5 1" 1, 210 T5D518x 5 1" 1, " 1, 592 T6B818x 6 2" 1, 592 T2A524x20 2 1" T2B524x T3A524x20 3 1" T3B524x T4A524x20 4 1" 20 1, 020 T4B524x , 020 T5A524x20 5 0" 20 1, 275 T5B524x , 275 T5C524x20 5 1" 20 1, 275 T5D524x20 5 1" 20 1, 275 T6A824x20 6 0" 20 1, 670 T6B824x20 6 2" 20 1, 670 Telescoping T6A818x 67

68 TELESCOPING 13/8 x Ga. On All Sections Telescoping This unit is best utilized for hand loading of products. A slope of 2" per 10' should be adequate for proper flow of product over 40 pounds; and per 10' for 5 40 pound product. The rollers at close centers in the top section provide a smooth transition between existing systems and the telescope conveyor. of 10' Sections Slope Per 10' Section "OF" Wt. (Lbs.) T2A51814TL 2 1" 690 T2B51814TL T3A51814TL 3 1" 1, 044 T3B51814TL 3 1, 044 T4A51814TL 4 1" 1, 392 T4B51814TL 4 1, 392 T5A51814TL 5 0" 1, 740 T5B51814TL 5 1, 740 T5C51814TL 5 1" 1, 740 T5D51814TL 5 1" 1, 740 T6A51814TL 6 0" 2, 090 T6B51814TL 6 2" 2, 090 T2A52414TL 2 1" 802 T2B52414TL T3A52414TL 3 1" 1, 200 T3B52414TL 3 1, 200 T4A52414TL 4 1" 1, 604 T4B52414TL 4 1, 604 T5A52414TL 5 0" 2, 005 T5B52414TL 5 2, 005 T5C52414TL 5 1" 2, 005 T5D52414TL 5 1" 2, 005 T6A82414TL 6 0" 2, 405 T6B82414TL 6 2" 2, 405 of 10' Sections Slope Per 10' Section "OF" Wt. (Lbs.) T2A53214TL 2 1" 32" 845 T2B53214TL 2 32" 845 T3A53214TL 3 1" 32" 1, 243 T3B53214TL 3 32" 1, 243 T4A53214TL 4 1" 32" 1, 660 T4B53214TL 4 32" 1, 660 T5A53214TL 5 0" 32" 2, 065 T5B53214TL 5 32" 2, 065 T5C53214TL 5 1" 32" 2, 065 T5D53214TL 5 1" 32" 2, 065 T6A83214TL 6 0" 32" 2, 495 T6B83214TL 6 2" 32" 2, All Sections: 21/2" x 1" x 12 ga. galvanized steel frames with 13/ x ga. galvanized steel rollers on centers Main Frame: 10 ga. formed steel channel Transition Sections: 13/ x ga. galvanized steel rollers; centers. Casters: 5" diameter swivel standard up to 5 section units; diameter on 6 section units. Floor Locks: Foot activated standard on each end. Capacity: 140 Lbs. per foot. Options: 1. diameter casters for uneven floor/dock situations; adds to all heights. 2. Contact a representative for information concerning transition herringbone sections that automatically center packages.

69 BALL TABLES Ball Tables Ball Transfer Tables Ball transfer units are used where product must change direction or at an intersection of two conveyors. Table assemblies are designed to matchup with 1.9" diameter roller conveyor frames. For existing conveyors, the dropin insert plate design allows for the removal of rollers and ball assembly insert plates to be "droppedin" and bolted, applies to 1.9" & 13/ roller conveyors. Stands not included with ball table assemblies. Ball Assemblies: 1" diameter steel ball with a 13/ diameter steel housing, 1/420 center post mount. Frame: 31/2" x 13/ x 11 ga. painted steel channel with butt plates. Insert Plates: x 1" x 12 ga. galvanized channel; bolts into side frames; ball holes punched on 1" centers. Widths: Standard 's include, 1, & 3. Capacity: Maximum distributed live Load: Frame 120 Lbs./Ft. on 10' support centers 600 Lbs./Ft. on 5' support centers (except 3 ) 500 Lbs./Ft. on 5' support centers for 3 Ball Assembly 75 Lbs. each Ball Wt. (Lbs./Ft.) BT10 _2 2" 25 BT10 _3 22 BT10 _4 20 BT _2 1 2" 35 BT _ BT _ BT _ Ball Wt. (Lbs./Ft.) BT22 _2 2" 44 BT22 _3 36 BT22 _4 32 BT22 _6 28 BT36 _2 3 2" 66 BT36 _ BT36 _ BT36 _ Ball Tables Replace " _" in with length in increments up to 10' (1' = 010; 1' = 015) 69

70 BALL TABLES Ball Transfer Inserts For existing conveyors, the dropin insert plate design allows for the removal of rollers and ball assembly insert plates to be "droppedin" and bolted, applies to 1.9" & 13/ roller conveyors. Ball Assemblies: 1" diameter steel ball with a 13/ diameter steel housing, 1/420 center post mount. Insert Plates: x 1" x 12 ga. galvanized channel; bolts into side frames; ball holes punched on 1" centers. Capacity: Ball assembly 75 Lbs. each Ball Wt. (Lbs.) Ball Wt. (Lbs.) BTI102 2" 8.2 BTI223 2" 17.5 BTI BTI BTI BTI BTI BTI Ball Wt. (Lbs.) Ball Wt. (Lbs.) BTI2 1 2" 12.8 BTI " 28.5 BTI BTI BTI BTI BTI BTI Ball Tables 70

71 BALL TABLES Ball Transfers Ball transfers make light work of directing, shifting, rotating, and turning loads in material handling applications. Ball transfers are widely used in many industrial applications including: Conveyor systems needing turntables, redirection, or cargo decks. Machinery feed tables or die change tables. Industrial caster applications. All ball transfers are sealed and lubricated for long life (except nylon ball). Carbon steel components are zinc plated. Style Ball Housing Capacity (Lbs.) Pack Qty Pack Wt. (Lbs.) Stud Carbon Steel Carbon Steel Stud Stainless Steel Stainless Steel Stud Nylon Carbon Steel Flange Carbon Steel Carbon Steel Flange Stainless Steel Stainless Steel Flange Nylon Carbon Steel Stud Carbon Steel Carbon Steel Stud Carbon Steel Carbon Steel Pt. No Pt. No Pt. No Pt. Nos , 25904, Ball Tables Pt. No Pt. No Pt. No Pt. Nos , 22279,

72 BALL TABLES Ball Transfers Style Ball Housing Capacity (Lbs.) Pack Qty Pack Wt. (Lbs.) DropIn Carbon Steel Carbon Steel DropIn Carbon Steel Carbon Steel DropIn Carbon Steel Carbon Steel DropIn Stainless Steel Carbon Steel Flange Carbon Steel Carbon Steel Flange Stainless Steel Stainless Steel Pt. No Pt. No Pt. No Ball Tables Pt. No Pt. Nos , Pt. Nos , 25913

73 ACCESSORIES Guard Model GU3 Rail: 21/2" x 1" x 12 ga. galvanized steel or 21/2" x 1" x 1/ aluminum channel. Set of 2 rails included. Attachment: Bolted to top flange of conveyor frame; hardware included. Conveyor Inside Radius Channel Wt. (Lbs.) GU310 10' Straight Galvanized 32 GU390 R 90 Degree " Galvanized 23 GU390 R36 90 Degree 3 Galvanized 28 GU3A10 10' Straight Aluminum 13 GU3A90 R 90 Degree " Aluminum 10 GU3A90 R36 90 Degree 3 Aluminum 12 Replace " " in with When ordering for curve, specify inner radius & conveyor style Guard Model GU4 Rail: 31/2" x 13/ x 11 ga. painted steel or 31/2" x 13/ x 1/ aluminum channel. Set of 2 rails included. Attachment: Bolted to top flange of conveyor frame; hardware included. Conveyor Inside Radius Channel Wt. (Lbs.) GU410 10' Straight Painted 50 GU490 R 90 Degree " Painted 37 GU4A10 10' Straight 3 Aluminum 18 GU4A90 R 90 Degree Aluminum 14 Replace " " in with When ordering for curve, specify inner radius & conveyor style Guard Model GU5 Rail: 21/2" x 1" x 12 ga. galvanized steel channel. Set of 2 rails included. Attachment: Adjustable vertically and horizontally, bolted to bottom of flange conveyor frame, hardware included. Conveyor Channel Wt. (Lbs.) GU510 10' Straight Galvanized 46 GU Degree Galvanized 38 Accessories Replace " " in with When ordering for curve, specify inner radius & conveyor style Guards for curves are adjustable vertically only 73

74 ACCESSORIES Gate Kit Model HG Gates are used to create an opening through a gravity conveyor section. The spring assist mechanism reduces the lifting force required to open the gate. Each end of the opening must be supported by floor supports. Gates are available in Skatewheel or conveyor. Hstands sold separately. Frame: Skatewheel: 21/2" x 1" x 12 ga. aluminum or galvanized steel channel. : 21/2" x 1" x 12 ga. galvanized or 31/2" x 13/ x 11 ga. painted steel channel. Attachment: Bolts to exsiting conveyors. All mounting hardware included; Field drilling may be required. Capacity: Dependent upon conveyor used. Overall Width: + 3' SKATEWHEEL GATE KITS OAW Wheels Per Ft Gate Frame Wt. (Lbs.) HG1210A /2" Aluminum 37 HG18A /2" Aluminum 43 HG2420A /2" Aluminum 49 HG1210G /2" Galvanized 47 HG18G /2" Galvanized 58 HG2420G /2" Galvanized 66 Accessories 3' ROLLER GATE KITS Gate Frame Wt. (Lbs.) HG140B / x 18 ga. 21/2" Galvanized 59 HG140B / x 18 ga. 21/2" Galvanized 72 HG140B / x 18 ga. 21/2" Galvanized 87 HG190B " x ga. 31/2" Painted 70 HG190B " x ga. 31/2" Painted 87 HG190B " x ga. 31/2" Painted

75 ACCESSORIES Hand Operated Stop Model RS140/RS190 The hand operated roller stop is used on gravity conveyors where manual line control is required to stop or index conveyed items. To operate, rotate lever 90 degrees to raise or lower stop. It may be used as normally up or down 21/2" FRAME Stop: 13/ x galvanized steel roller with 7/1 hex shaft. Blade stop is optional. Also available with 1.9" x ga. roller (RS140 is shown). Lock: Positive over center style. 31/2" FRAME Attachment: Bolted to bottom flange of conveyor frame, mounting hardware included. Drilling of bottom flange required. During field installation, removal of one conveyor roller is required. Weight: 15 Lbs. + (1 x ) For Frame Wt. RS140B 13/ x Ga Galvanized 21/2" 15 + (1 x ) RS190B 1.9" x Ga Galvanized 31/2" 15 + (1 x ) Replace " " in with Angle Stop Model AS15 Used to stop conveyed items at a fixed location. Stop: x x 3/1 painted steel angle. Attachment: Bolted to top flange of 21/2", or 31/2" frame; mounting hardware included. Drilling of top flange required. Wt. AS15B 1 + (.15 x ) Accessories Replace " " in with 75

76 ACCESSORIES Angle Stop Model AS20 Used to stop conveyed items at a fixed location. Stop: 2" x 2" x 1/ painted steel angle. Attachment: Bolted to top flange of frame; mounting hardware included. Drilling of top flange required. Wt. AS20B 1 + (.27 x ) Replace " " in with Flat Stop Model FS25 Stop: x 3/1 painted steel Attachment: Bolted to butt plate; mounting hardware included. Wt. FS25B 1 + (. x ) Replace " " in with Flat Stop Model FS35 Stop: 31/2" x 3/1 painted steel Attachment: Bolted to butt plate; mounting hardware included. Wt. FS35B 1 + (.19 x ) Replace " " in with Flat Stop Model FS40 Accessories Stop: x 1/ painted steel Attachment: Bolted to butt plate; mounting hardware included. Wt. FS40B (.32 x ) Replace " " in with 76

77 Custom solutions CUSTOM SOLUTIONS This page contains a few examples of our ability to custom design and manufacture products which solve our customer's distribution and warehouse material handling problems. 77

78 Help Selecting A Product HELP SELECTING A PRODUCT Gravity Conveyor vs Belt Conveyor Gravity Conveyor vs. Power Belt Conveyor When selecting a conveyor one must first decide whether gravity conveyor will fulfill the application requirements or power belt conveyor will be necessary. Gravity $ Cost VS. Belt $$$ Product Flow Downhill Uphill Level Controlled speed Controlled spacing (manually push) Product Type Boxes & Cartons Drums & Pails Skids & Pallets (runner direction important) Totes Bags (size dependent) (size dependent) Installation Temporary with Hook & Rod, & Tripods Permanent with HStands Application Transporting Assembly Staging Sorting Metering Accumulating Turn to page 75 for Gravity Skatewheel vs Gravity 78 Turn to page 76 for Slider Bed vs Bed

79 HELP SELECTING A PRODUCT Skatewheel Conveyor vs Conveyor Skatewheel Conveyor vs. conveyor Skatewheel Cost $ VS. $$$ Product Flow Boxes & Cartons Drums & Pails Skids & pallets (runner direction important) Totes Bags Lighter loads ( what one person is able to lift) Heavy loads No minimum load width Installation Temporary with Hook & Rod, & Tripods Permanent with HStands (certain models) Application Least amount of pitch required to start load Best maintains orientation around curves CAN slide load on from side For help selecting a Skatewheel Conveyor, turn to the General Information section on page 17. For help selecting a Conveyor, turn to the General Information section on page

80 HELP SELECTING A PRODUCT Slider Bed vs Bed Power Belt Slider Bed vs. Power Belt Bed Slider $$ Cost VS. $$$ Product Type Boxes & Cartons Drums & Pails Skids & pallets (runner direction important) Totes Bags Lighter loads ( what one person is able to lift) Heavy loads no minimum load width Installation Permanent with HStands Moveable on casters (less than 20 ft) Application Transporting Assembly Staging Sorting Metering Less HP per load Reversing available (center drive) Variable speed available Most stable surface Most quiet operation For help selecting a Silder Bed Conveyor, turn to the General Information section on page For help selecting a Bed Conveyor, turn to the General Information section on page 3.