Single Effect Hot Water Driven Absorption Machine

Size: px

Start display at page:

Download "Single Effect Hot Water Driven Absorption Machine"

Benjamin Cox
5 years ago
Views:

1 or uture Energy & Environment Note Single Effect ot Driven bsorption Machine Single Effect Low emperature ot bsorption Chiller erformance Data Chilled Cooling ot Electric Size Weight Model Cooling Capacity. Drop ressure Drop. Drop Control Valve ower source bs. umps Ref. ump urge ump Lenght (L) Width (W) eight () Rigging Operation Shell Control Valve Space for ube Replacement Volume of Machine otal mpere Chilled Side Cooling Side ot Side Unit kw usr m 3 /h m 2 m 3 /h m 2 ton/h m 2 m 2 - kw () kw () kw () kw () ton ton 1. Working pressure of chilled/cooling water circuits are based on 1.Ma (15psig) and Ma (23psig) for driving hot water circuit. 2. Standard flow rate of chilled water per usr is.648m 3 /h, 1.321m 3 /h for cooling water and.28ton/h for hot water. 3. ouling factor.1m 2.h. o C/kcal for and,.1m 2.h. o C/kcal for and. 4. igh temperature (1 ~ 15 degree C) ot Driving type is available as additional model. ollowings are the standard capacity range and the standard operational condition for the model selection; - Cooling capacity range as Standard model : 1 ~ 13R - Inlet / Outlet temperature : 138 / 18 degree C - Inlet / Outlet temperature : 12 / 7 degree C - Inlet / Outlet temperature : 32 / 39 degree C Single Effect ot Driven ype (3~3R) L3 L4 L5 L6 L75 L9 L11 L135 L155 L18 L21 L24 L27 L , / / / ø, 38V, 5z 1.2 (4.) 1.5 (4.) 2. (6.) 2.4 (7.).2 (1.1).3 (1.5).4 ().4 (1.5).2 (.5) ,95 2,598 2,597 3,68 3,78 4,734 4,776 1,77 1,95 1,244 1,472 1,495 1,88 2,255 2,257 2, ,9 2,4 2,4 3,4 4,

2 WR - L Series WORLD ENERY Single Effect ot Driven bsorption Machine erformance Data Single Effect ot Driven ype (34~13R) Model Unit L34 L375 L42 L47 L525 L6 L675 L75 L825 L9 L975 L15 L1 L13 Cooling Capacity kw usr 1, , , , , ,11 6 2,373 2, , , , ,692 1,5 3,956 4,571 1, 1,3 13 / 8 Chilled. Drop m 3 /h m / 36.5 Cooling. Drop m 3 /h m , , , , , , m ot ressure Drop Shell Control Valve ton/h m 2 m / L-erformance Data Control Valve ower source - 3ø, 38V, 5z bs. umps kw () 2.4 (7.) 3. (11.) 4.5 (16.) Electric Ref. ump urge ump kw () kw ().4 () 1.5 (4.).4 (1.5).75 (2.3) kw ().2 (.5) otal mpere Lenght (L) 4,88 4,998 5,54 6,38 5,644 6,142 6,667 6,293 6,818 7,318 6,86 7,36 7,86 Size Width (W) 1,575 1,83 2,26 2,329 2,929 eight () 2,838 3,222 3,6 4, Weight Rigging Operation ton ton Space for ube Replacement 4,5 5,2 5,7 5,2 5,7 6,2 5,7 6,2 6,7 6,2 6,7 7,2 Volume of Machine Chilled Side Cooling Side ot Side 463 1, , , , , , ,45 3, ,11 3, ,439 4,1 95 1,525 4, ,67 4,435 1,45 1,688 5,426 1,146 1,783 5,675 1,217 1,98 6,172 1,36 Options 1. igh ressure water oxes boxes rated for 25psig or 3psig working pressure shall be furnished when specified on the equipment specification data. 2. Special ubes ubes of non-standard materials and/or wall thickness shall be provided when specified on the equipment specification data. 3. Special operation temperature conditions Special operation temperature shall be provided when specified on the equipment specification data.

3 or uture Energy & Environment Single Effect ot Driven bsorption Machine WR-L3 / 4 R6 176(W) 295(L) Cooling Outlet (1) 176 Inlet (65) Outlet (65) () Outlet (65) Cooling Inlet (1) Inlet (65) R6 177(W) 26(L) Cooling Outlet (1) 1772 Cooling 188() Inlet (65) 1394 Outlet(65) 158 Outlet (65) 1169 Inlet (65) 762 Inlet (1) Outline_oudation 2. ll external water piping are to be provided by the customer. Longitudinal Distance : 1m op :.2m : 1.2m Others :.5m WR-L5 /

4 WR - L Series WORLD ENERY Single Effect ot Driven bsorption Machine Outline_oudation WR-L75 / 9 2. ll external water piping are to be provided by the customer. Longitudinal Distance : 1m op :.2m : 1.2m Others :.5m (W) R6 2597(L) Cooling Outlet () 2 Cooling Inlet () () Inlet (65) Outlet (65) 1825 Outlet (8) 141 Inlet (8) 95 L- Outline oundation WR-L11 / R (L) 1242(W) 219 Colling water Outlet (15) Inlet (8) Outlet (8) 142 Outlet (1) 2255() 958 Inlet (1) Inlet (15)

5 or uture Energy & Environment Single Effect ot Driven bsorption Machine Outline_oudation WR-L155 / ll external water piping are to be provided by the customer. Longitudinal Distance : 1m op :.2m : 1.2m Others :.5m R (L) 1472(W) 2257() Inlet (8) Outlet (2) 281 Outlet (8) 181 Outlet () 137 Inlet () 118 Inlet (2) WR-L21 / R (W) 4734(L) Outlet(2) 281 Inlet() () Inlet(8) 162 Outlet(8) 181 Outlet() 137 Inlet(2)

6 WR - L Series Outline_oudation WR-L27 / 3 WORLD ENERY Single Effect ot Driven bsorption Machine 2. ll external water piping are to be provided by the customer. Longitudinal Distance : 1m op :.2m : 1.2m Others :.5m (W) 4776(L) R Inlet (15) () Inlet (1) Outlet (2) 2364 Outlet (1) 218 Outlet (15) 1511 L-Outline_oudation 652 Inlet (2) WR-L34 / R (W) 488(L) Inlet () 1956 Outlet (25) 2616 Outlet () 2175 Outlet (2) 164 Inlet (2) () Outlet (25)

7 or uture Energy & Environment Single Effect ot Driven bsorption Machine Outline_oudation WR-L42 / 47 / ll external water piping are to be provided by the customer. Longitudinal Distance : 1m op :.2m : 1.2m Others :.5m C D E I L L L R (W) Inlet () 2284 Outlet (3) 31 Outlet () 253 Outlet (2) () Inlet (2) 122 Inlet (3) I 315 C D E WR-L6 / 675 / 75 C D E I L L L R Inlet (15) (W) Outlet (35) 332 Outlet (15) 2753 Outlet (25) () Inlet (25) 1462 Inlet (35) I C D E

8 WR - L Series Outline_oudation WR-L825 / 9 / 975 WORLD ENERY Single Effect ot Driven bsorption Machine 2. ll external water piping are to be provided by the customer. Longitudinal Distance : 1m op :.2m : 1.2m Others :.5m C D E L L L R6 2329(W) Inlet (3) 4() 2796 Inlet (2) 3761 Outlet (4) 393 Outlet (2) 2386 Outlet (3) L- Outline_oudation 859 Inlet (4) CDE WR-L15 / 1 / 13 C D E L L L (W) R Inlet (2) 2835 Outlet (4) 3681 Outlet (2) 2887 Outlet (3) 2154 Inlet (3) 4() 1565 Inlet (4) CD E

9 or uture Energy & Environment hermal Insulation ot Surfaces Single Effect 2.8 ot Driven bsorption Machine 19 (3/4 in) : with ox (3/8 in) : eat Exchanger ody with iping Cold Surfaces 19 (3/4 in) : ody with ox 1 (3/8 in) : Inlet and Outlet iping of Refrigerant ump Evapo rator Note 1. Use only Non-inflaable or Incombustible insulation materials. 2. Do not insulate motor of refrigerant pump. 3. otal insulation area includes piping. 4. Do not cover components such as service valves, dampers, diaphragm valves, sight glass, control valves or thermometers or sensor wells. 5. he standard Material and hickness as the recoendation : O Surface insulation Material of insulation : Non-inflaable polymer sponge usable at 12 C hickness of insulation : 19 (3/4 inch), 1 (3/8 inch) when polymer sponge is used COLD Surface insulation Material of insulation : Closed cell type Non-inflaable polymer sponge hickness of insulation : 1 (3/8 inch), 19 (3/4 inch) 6. or insulation area for each model, please refer to the picture below. 7. he water box sections should be worked to be disassembled for the repair. 8. If necessary, please perform the finish painting in the field after completing the insulation work. Model () WR-L3 WR-L4 WR-L5 WR-L6 WR-L75 WR-L9 WR-L11 WR-L135 WR-L155 WR-L18 WR-L21 WR-L24 WR-L27 WR-L3 ot Surface(m 2 ) Cold Surface(m 2 ) Model ot Surface(m 2 ) Cold Surface(m 2 ) () WR-L WR-L WR-L WR-L WR-L WR-L WR-L WR-L WR-L WR-L WR-L WR-L WR-L

WORLD ENERY bsorption Machines Supply Scope (Standard) Item Chiller ssembly Initial charge ainting Insulation est & Inspection erformance est Description 1),,, s 2) Solution eat Exchanger 3) umps -

10 WORLD ENERY bsorption Machines Supply Scope (Standard) Item Chiller ssembly Initial charge ainting Insulation est & Inspection erformance est Description 1),,, s 2) Solution eat Exchanger 3) umps - Solution pumps with isolation valves - Refrigerant pump with isolation valves - urge pump 4) Control panel - anel unit, circuit reakers - Switches ( Operation, emergency, man/auto selector) - Relays, controller, touch screen 5) Locally mounted control instruments - flow switch - temperature sensors 6) urge device - urge storage tank, Eductor, Liquid trap, Manometer, piping and manual valves 7) Interconnecting piping and wiring - Refrigerant and absorbent piping for internal mechanical components - Control & ower wiring for Internal electrical components bsorbent (Lithium bromide) with inhibitor Refrigerant ainting for chiller assembly and control panel Insulation of hot surface and cold surface for bsorption chiller 1) Check of external dimensions 2) ydraulic ressure test for water oxes 3) Leak est (Vacuum side) 4) unction test for electric circuit and safety device actory test or start-up at site Out of supply and work scope for Vendor Installation & wiring work 1. oundation of chiller 2. Installation of chiller 3. iping and wiring connections out of Chillers 4. Interlock wiring of chilled water pump and cooling water pump. 5. Installation and wiring of control valve. Scope Vendor Vendor Vendor Option Vendor Option uyer L-hermal Insulation / Supply Scope for bsorption Machines ainting ainting type : Epoxy rime and Epoxy inish painting Color : Chiller body - lue (Munsell No /6.7) - rey (Munsell No.5Y 7/1) ㆍ 21 Installation (Korea)

11 or uture Energy & Environment Single Effect Double Lift ot Driven bsorption Machine System iping control valve ot Diff. ressure Control Valve Outlet Cooling tower M Inlet Supply water ir handling unit leed off Expansion tank Drain line Outlet bsorption chiller Outlet Chilled / ot low meter water ump(1st) Inlet Chilled / ot water ump(2nd) ypass valve Outlet Inlet hermostat ressure auge emperature auge Valve Inlet Cooling water pump Drain Valve ir Vent Supply header Return header 1) ll external equipment out of dotted line is scope of customer's. 2) Refer to outline drawing and specification data sheet for the external dimensions of the machine, the location & the diameter of water pipe connection and etc. 3) Driving hot water must be maintained as design temperature. 4) It is strongly recoended to install stop valves at hot water inlet and outlet pipe. 5) he locations of chilled water pumps, cooling water pumps and expansion tanks shall be determined in consideration of the hydrostatic head of pumps and the height of building. nd the Machine shall not be subject to a pressure higher than the designed pressure at any water header. 6) or cooling water quality control, it is recoended to install cooling water bleed-off device on the inlet pipe line of cooling towers. 7) round 1 meshes of strainers are recoended to be installed in the cooling water line. Cooling Quality Control he cooling water which is recycled by cooling tower is exposed into atmosphere and polluted as it is vaporized. If the cooling water gets polluted, it develops corrosion and also scale inside the tubes and bsorption Machine performance drops. 8) or the maintenance and the inspection of the Machine, the following equipment shall be installed on each chilled water and cooling water inlet/outlet lines as well as stop valve. hermometers and pressure gauges shall be installed at chilled and cooling water inlet/outlet. ir relief valves shall be installed on each chilled and cooling water lines at higher points than each water header. Drain valves shall be installed at the lowest position between the stop valves of chilled and cooling water and the Machine and the drain valve shall be piped to the drain ditch. 9) here shall be a sufficient clearance for access to the absorber, evaporator, condenser, and generator to facilitate inspection and cleaning work. herefore, it is recoended to control the water quality; the following table shows guideline for cooling water and make-up water. he tube cleaning method and interval depends on each water quality. Standard Reference Items (25 C) Conductivity (25 C, s/cm) Chloride ion CI (mg / ci /l) Sulfuric acid ion SO 4 2-(mg CaCo 3 /l) lkalinity p4.8 (mg CaCo 3 /l) otal hardness (mg CaCO 3 /l) Iron e (25 C) Sulfides S 2 - ion (ms S 2 -/l) onium ion N 4 + (mg N 4 +/l) Silica SiO (mg SiO 2 /l) Cooling 6.5 ~ 8. Max. 8 Max. 2 Max. 2 Max. 1 Max. 2 Max. 1. No trace Max. 1. Max. 5 Make-up 6.5 ~ 8. Max. 2 Max. 5 Max. 5 Max. 5 Max. 5 Max..3 No trace Max..2 Max. 3 endency Corrosion Scale

50RHR/50RVR/50RDR HORIZONTAL, VERTICAL AND DOWNFLOW WATER SOURCE HEAT PUMPS

50RHR/50RVR/50RDR HORIZONTAL, VERTICAL AND DOWNFLOW WATER SOURCE HEAT PUMPS 0-1 0/0V/0 IZ, VI WW W IZ 1 / 2 to I VI 3 / 4 to I WW 1 1 / 4 to I II II I opyright 2000 arrier orporation yracuse, ew York 13221 orm 0-1 eplaces: ew rinted in... 2-00 atalog o. 1-170 ate: upersedes: 0/0V/0