EXPERIMENT MANUAL. Instruction Book

Size: px

Start display at page:

Download "EXPERIMENT MANUAL. Instruction Book"

Bertina Mitchell
5 years ago
Views:

1 EXPERIMENT MANUAL Instruction Book

REMOTE-CONTROL MACHINES Contents Parts List... The Remote Control System... About the Gears... Model - Car... 0 Model - Three-Wheeler... Model - Crane... Model - Bulldozer... 8 Model - Antique Car.

Please read the instructions, follow the safety rules, and keep them for reference. We recommend that you make the models in the given order.

It helps children develop mechanical thinking and problem solving skills.. Discuss the safety warnings and possible risks involved with the children before allowing them to build the models.

. CLEANING: - Before cleaning, remove the batteries. - Use only a cloth that has been slightly dampened with water. - Never use soap or detergent.

2 REMOTE-CONTROL MACHINES Contents Parts List... The Remote Control System... About the Gears... Model - Car... 0 Model - Three-Wheeler... Model - Crane... Model - Bulldozer... 8 Model - Antique Car... Model - Bulldozer II... Model 7 - Folding Car... 0 Model 8 - Formula Car... Model 9 - Three-Blade Bulldozer... 7 Model 0 - Robotic Arm... RECOMMENDATIONS. Please read the instructions, follow the safety rules, and keep them for reference. We recommend that you make the models in the given order. You will then be able to better understand the assembly and operation of the parts.. This is a kit designed for children over 8 years of age. It helps children develop mechanical thinking and problem solving skills.. Discuss the safety warnings and possible risks involved with the children before allowing them to build the models.. Do not insert the wire connectors and other components into any electrical sockets, which will cause a serious damage. Only the recommended batteries are allowed for use with this kit.. CLEANING: - Before cleaning, remove the batteries. - Use only a cloth that has been slightly dampened with water. - Never use soap or detergent. WARNING TO PARENTS This kit is not suitable for children under years of age. It contains small parts that a child could swallow. This kit must be kept out of the reach of very young children. Receiver/Battery Holder Insert three AA batteries (. V) into the combination receiver/battery holder. The polarity of the batteries and the markings on the battery compartments should match. Remote Controller. Lightly press and slide the lid outward to open it.. Insert two AA batteries (. V) and pay attention to the polarity of the batteries and the markings on the compartments. To later remove a battery from the holder, use the B end of the part separator tool.. Slide back the lid. SAFETY GUIDELINES. Regular, non-rechargeable batteries must not be recharged.. Rechargeable batteries can be charged only under the supervision of an adult.. Rechargeable batteries are to be removed from the toy before being charged.. Do not force open the battery.. Do not throw the battery into the fire.. Pay attention to the correct polarity. 7. Do not short-circuit batteries. They could explode! 8. Do not mix old and new batteries. 9. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickelcadmium) batteries. 0. The exhausted batteries must be disposed of as hazardous waste.. Remove the batteries when not planning to use the device for a long period of time.. Misuse of batteries can cause them to leak, which damages and corrodes the area around the battery, creating the danger of fire, explosion, and personal injury. B

Parts List REMOTE-CONTROL MACHINES WHEEL AND TIRE SHAFT PIN 7 TWO-TO-ONE CONVERTER JOINT PIN LONG AXLE 8

80T GEAR LARGE SPROCKET 8 EXTRA LONG AXLE GEARED MOTOR WITH WIRE CONNECTOR CHAIN UNIT (BLACK) 8 9 -HOLE

ROD WORM GEAR II 9 -HOLE ROD (GRAY) SQUARE FRAME 7 MEDIUM AXLE 0 -HOLE ROD (YELLOW) SHORT AXLE DIE-CUT

3 Parts List REMOTE-CONTROL MACHINES WHEEL AND TIRE SHAFT PIN 7 TWO-TO-ONE CONVERTER JOINT PIN LONG AXLE 8 CURVED ELBOW ROD SMALL SPROCKET MOTOR AXLE 9 90 DEGREE CONVERTER - LEFT MEDIUM SPROCKET 7 ROD CONNECTOR 0 80T GEAR LARGE SPROCKET 8 EXTRA LONG AXLE GEARED MOTOR WITH WIRE CONNECTOR CHAIN UNIT (BLACK) 8 9 -HOLE ROD REMOTE CONTROLLER 7 CHAIN UNIT (YELLOW) 0 -HOLE ROD RECEIVER/BATTERY HOLDER 8 AXLE LOCK -HOLE DUAL ROD WORM GEAR II 9 -HOLE ROD (GRAY) SQUARE FRAME 7 MEDIUM AXLE 0 -HOLE ROD (YELLOW) SHORT AXLE DIE-CUT CARDBOARD PIECES SMALL GEAR (0T) MEDIUM GEAR (0T) LONG FRAME PART SEPARATOR TOOL TOTAL 8 LARGE GEAR (0T) ANCHOR PIN

REMOTE-CONTROL MACHINES Model Crane Size (cm) : (L) x (W)

gear B upward to hold the 80T Gear in place.

connector of the motor and the output of the

batteries are not dead. A B How to Operate:.

. Touch the touch pad or on the remote controller to

Don't lift it up higher than 90 degrees.

4 REMOTE-CONTROL MACHINES Model Crane Size (cm) : (L) x (W) x (H) Tips for Assembly: Press the gear A downward and gear B upward to hold the 80T Gear in place. The wheels and the drive chain must be kept mm away from the frame so they can turn smoothly. Use the end of the part separator tool marked with "A" to pry up the anchor pin. If the motor doesn t work, check to make sure the wire connector of the motor and the output of the receiver/battery holder are well connected, or that the batteries are not dead. A B How to Operate:. Turn on the switch on the remote controller.. Touch the touch pad or on the remote controller to lower down or lift up the long crane arm. Don't lift it up higher than 90 degrees.. Touch the touch pad or to turn the 80T gear clockwise or counterclockwise. Don't turn it more than 70 degrees or the wire will get twisted up.. Touch the touch pad or to drive the crane forward or backward.

5 Model Crane REMOTE-CONTROL MACHINES A Decreases speed by 0 times Decreases speed by times 7 Decreases speed by times Completed

REMOTE-CONTROL MACHINES Contents and Safety Information

REMOTE-CONTROL MACHINES Contents and Safety Information EXPERIMENT MANUAL Franckh-Kosmos Verlags-GmbH & Co. KG, Pfizerstr. -7, 7084 Stuttgart, Germany +49 (0) 7 9-0 www.kosmos.de Thames & Kosmos, 0 Friendship St., Providence, RI, 090, USA -800-87-87 www.thamesandkosmos.com