GENSET PRODUCTS 013 2

Transcription

1 GENSET PRODUCTS 2013

2

3 TECHNOLOGY IS NOW FOR EVERYONE D 700 COMMUNICATION CAPABILITIES

4 AUTOMATIC MAINS FAILURE UNITS DKG 107 DKG 107 The lowest cost AMF module Factory set timers Adjustable AC low voltage limit Jumper selectable 50/60Hz Jumper selectable oil pressure/ oil level switch input Dimensions: 72x72x52mm (WxHxD) DKG 105 DKG 105 Simple, compact & programmable Configurable from front panel Digital display of genset frequency and phase voltages Dimensions: 72x72x76mm (WxHxD) DKG 207 DKG 207 Low cost with analog measurements KW and PF measurement (single phase) Periodic maintenance request display Logic level serial port Dimensions: 130x100x39mm (WxHxD DKG 307 DKG 307 Wide temperature range & analog measurements Available with J1939 or MPU input Genset KW and PF measurement Battery backed-up real time clock, Built-in daily, weekly, monthly exerciser Statistical counters Serial RS-232 port MODBUS communications Dimensions: 172 x 134 x 46 mm (WxHxD)

5 AUTOMATIC MAINS FAILURE UNITS DKG 109 Graphic display, 96x96mm DKG 109 J1939-CANBUS or magnetic pickup input Genset KW and PF measurement (single phase) Logic level serial port Dimensions: 102 x 102 x 53 mm (WxHxD) DKG 309 Basic, high performance & versatile DKG 309 J1939-CANBUS or magnetic pickup input Genset per phase KW and PF measurement Battery backed-up real time clock, Built-in daily, weekly, monthly exerciser GSM SMS message sending on fault Modem calls on fault MODBUS communications Dimensions: 172 x 134 x 46 mm (WxHxD) DKG 509 High performance & versatile DKG 509 J1939-CANBUS or magnetic pickup input Genset per phase KW and PF measurement Battery backed-up real time clock, Built-in daily, weekly, monthly exerciser GSM SMS message sending on fault Modem calls on fault MODBUS communications Optional internal GSM modem Dimensions: 200 x 148 x 46 mm (WxHxD) D 300 D 300 Low cost, graphic display J1939-CANBUS or magnetic pickup input Genset per phase KW and PF measurement Dimensions: 172 x 134 x 46 mm (WxHxD)

6 ALL IN ONE UNITS D 500 D 500 The advanced controller technology is now for everyone! The D 500 is a comprehensive genset controller capable of all possible functions and communications. FUNCTIONALITIES AMF & ATS controller with no-break transfer Remote & Manual start controller Remote display & control module COMMUNICATIONS Ethernet 10/100 mbits Internal GPRS modem (optional) Embedded web server for monitoring & programming GSM-SMS sending sending RS-485 Modbus Modbus TCP/IP SNMP USB Host (optional) USB Device RS-232 (optional) Micro SD card slot (optional) FEATURES True RMS mains and genset AC measurements Long term data recording on flash card Waveform display of V & I Harmonic analysis of V & I Synchroscope display 400 Hz enabled J1939 CANBUS electronic engine support Battery backed-up real time clock, Built-in daily, weekly, monthly exerciser Customer logo display capability 400 event logs with time stamp and measurements Free PC software (USB-Modbus-IP Connected) Free Central Monitoring through internet Dimensions: 200 x 148 x 46 mm (WxHxD)

7 ALL IN ONE UNITS D 700 One controller for all genset applications The D 700 is a comprehensive genset controller capable of all possible functions and communications. FUNCTIONALITIES Multi genset synchronization and load share (48 gensets + 16 mains) Multi genset parallel with mains Multi genset power export to mains Multi genset peak lopping (peak shaving) Single genset parallel with mains AMF & ATS controller with no-break transfer Remote & Manual start controller Remote display & control module COMMUNICATIONS Ethernet 10/100 mbits Internal GPRS modem (optional) Embedded web server for monitoring & programming GSM-SMS sending sending RS-485 Modbus Modbus TCP/IP SNMP USB Host (optional) USB Device RS-232 (optional) Micro SD card slot (optional) Fully isolated CANBUS multi-device DataLink D 700 AUTO READY ALARM WARNING SERVICE REQUEST TEST TEST REQUEST SERVICE WARNING ALARM READY AUTO A A A AUTO AUTO A PAR«A KODU: K20R02E PGM MAN MAN PGM PAR«A KODU: K20R02E STOP STOP MAINS GENSET GENSET MAINS D 700 RUN RUN 4.3 TFT DISPLAY VERSION LOAD LOAD D 700 FEATURES True RMS mains and genset AC measurements Long term data recording on flash card Waveform display of V & I Harmonic analysis of V & I Synchroscope display 400 Hz enabled J1939 CANBUS electronic engine support Both active and reactive load sharing G-59 mains protections Heavy Duty Feature Dead bus sensing Load dependent quick and delayed automatic Start/Stop Soft loading and unloading of gensets Equal aging of gensets Programmable Logic functions Built-in Governor control Fully isolated built-in AVR control Battery backed-up real time clock, Built-in daily, weekly, monthly exerciser 400 event logs with time stamp and measurements Free PC software (USB-Modbus-IP Connected) Free Central Monitoring through internet Dimensions: 243 x 183 x 47mm (WxHxD)

8 AMF SELECTION CHART DKG 105 DKG 107 DKG 207 DKG 307 DKG 109 DKG 309 DKG 509 D 300 D 500 D Customer Support : Optional

9 IN-2 GND IN-1 UNIVERSAL INTERNET GCB G NEUT SIM CARD SUPPLY 8-36 V-DC GPRS MODEM GCB G GND REMOTE FLEET MANAGEMENT RAINBOW SCADA Your fleet is on your desktop! Rainbow Scada is an internet based universal remote monitoring and control program, flexible enough to integrate all kinds of intelligent control modules, independently of the manufacturer and function. Monitors up to endpoints Free of charge up to 100 endpoints Provides data security, data is sent to your IP address only Uses internet based dynamic world map On-line display of endpoint statuses on map and side bar Hierarchical structuring and grouping of endpoints Remote control of endpoints Recognizes automatically all Datakom D-xxx models Supports all Datakom products through DKG-210 gateway Supports 3rd party Modbus enabled products through DKG-210 gateway Data recording and analysis HTML interface for web monitoring RAINBOW SCADA SUPPLY 8-36 V-DC GCB G DKG 090 SIM CARD RS 232 GPRS MODEM DKG 090 DKG 090 GSM-GPRS MODEM Internet on air Designed for harsh automotive environment DC 8-36V power supply with protection DIN Rail mounted Lock-up free operation with D-xxx models Connects to all Datakom models GPRS Class 10 communications RS 232 DKG 210 DKG 090 DKG 210 Your flexible gateway to fleet management IN-2 GCB GND NEUT G UNIVERSAL INTERNET GATEWAY DKG 210 IN-1 DKG RS 485 H L RS 232 USB 1 2 USB GND Connects to Rainbow Scada through ethernet and GPRS Connects all Datakom modules to Rainbow Scada Ready to connect all 3rd party products to Rainbow Scada Connects up to 16 endpoints through RS-485 Modbus GSM_SMS and sending Designed for harsh automotive environment DC 8-36V power supply with protection Optional AC 230V power supply Internal GSM-GPRS modem RS-485 port RS-232 port CANBUS port USB Host port USB Device port for configuration Free Rainbow Plus configuration program RS 232 GATEWAY RS 485 H L

10 MANUAL AND REMOTE START UNITS DKG 114 DKG 114 Basic, zero power at rest Charge alternator excitation circuit, charge fail protection Jumper selected options for cooldown, 50/60Hz and Aux relay Selectable engine running signal (from genset AC or charge alternator) Dimensions: 72x72x43mm (WxHxD) DKG 116 DKG 116 The lowest cost Remote Start module Suitable for gasoline and diesel gensets. Tamper proof engine hours display Dimensions: 102 x 55 x 40 mm (WxHxD) DKG 215 DKG 215 Basic with measurements, zero power at rest Genset KW and PF measurement Engine hours run counter Periodic maintenance request display Statistical counters Dimensions: 102 x 102 x 53mm (WxHxD) DKG 227 DKG 227 Basic with measurements, zero power at rest Genset KW and PF measurement Engine hours run counter Periodic maintenance request display Statistical counters Dimensions: 130x100x39mm (WxHxD) DKG 317 DKG 317 Wide temperature range & analog measurements Available with J1939 or MPU input Genset KW and PF measurement Battery backed-up real time clock Built-in daily, weekly, monthly exerciser 100 event logs with time stamp Statistical counters Serial RS-232 port MODBUS communications Dimensions: 172 x 134 x 46 mm (WxHxD)

11 MANUAL AND REMOTE START UNITS DKG 119 Graphic display, 96x96mm DKG 119 J1939-CANBUS or magnetic pickup input Genset KW and PF measurement (single phase) Logic level serial port Dimensions: 102 x 102 x 53 mm (WxHxD) DKG 319 Basic, high performance & versatile DKG 319 J1939-CANBUS or magnetic pickup input Genset per phase KW and PF measurement Battery backed-up real time clock, Built-in daily, weekly, monthly exerciser GSM SMS message sending on fault Modem calls on fault MODBUS communications Dimensions: 172 x 134 x 46 mm (WxHxD) DKG 519 High performance & versatile DKG 519 J1939-CANBUS or magnetic pickup input Genset per phase KW and PF measurement Battery backed-up real time clock, Built-in daily, weekly, monthly exerciser GSM SMS message sending on fault Modem calls on fault MODBUS communications Optional internal GSM modem Dimensions: 200 x 148 x 46 mm (WxHxD) D 300-RS D 300-RS (Remote Start) Low cost, graphic display J1939-CANBUS or magnetic pickup input Genset per phase KW and PF measurement Dimensions: 172 x 134 x 46 mm (WxHxD)

12 MANUAL AND REMOTE START SELECTION CHART DKG 114 DKG 116 DKG 215 DKG 227 DKG 317 DKG 119 DKG 319 DKG 519 D 300-RS D 500 D Customer Support : Optional

13 MANUAL START UNITS DKG 110 Low cost engine protection DKG 110 Provides engine protection functions in a manual control panel DIN rail mounted 10 Amp fuel and alarm relay outputs High engine temperature & low oil pressure switch inputs Overspeed-underspeed protection 3 semiconductor lamp outputs Generator phase voltage input Standard dimensions, 36mm width DKG 151 DKG 151 Low cost manual start unit 10 Amp fuel and crank relay outputs Charge alternator excitation circuit, charge fail protection High engine temperature & low oil pressure switch inputs Overspeed-underspeed protection Spare alarm input User selectable 50/60 Hz & energize to start/stop operations Dimensions: 72x72x38mm (WxHxD) DKG 155 DKG 155 Manual start with high current outputs 16 Amp fuel and crank outputs Charge alternator excitation circuit, charge fail protection High engine temperature & low oil pressure switch inputs Overspeed-underspeed protection Spare alarm input User selectable 50/60 Hz operation Dimensions: 72x72x52mm (WxHxD) DKG 152 Low cost remote start unit REMOTE START UNITS 10 Amp fuel and crank relay outputs Charge alternator excitation circuit, charge fail protection High engine temperature & low oil pressure switch inputs Overspeed-underspeed protection Cooldown cycle on remote start operation User selectable 50/60 Hz operation User selectable energize to start/stop operation Dimensions: 72x72x38mm (WxHxD) DKG 152

14 MANUAL SYNCHRONIZATION DKG 117 DKG 117 Synchroscope & check synch unit 16 Amp check synch relay output Adjustable V, F, theta for check synch Single phase genset & busbar voltage inputs Synch Check Enable input Dead Bus Enable input Auto power_off feature Front panel adjustable parameters Dimensions (72x72x52mm) DKG 217 DKG 217 Auto start module with synchroscope & check synch Zero power consumption at rest 16 Amp check synch relay output Adjustable V, F, theta for check synch Genset / busbar voltage inputs: 3 /1 Genset current input: 1 Analogue temperature and oil pressure inputs Configurable digital inputs: 5 Genset KW and PF measurement (1 phase) Periodic maintenance request indicator Configurable from front panel Engine hours run counter Serial data port for telemetry on PC Dimensions (130x100x39mm) GOVERNOR CONTROLLERS DKG 253 DKG 253 Governor controller with ramp and speed protection 12 and 24V operation 10 Amp continuous current output Fast and accurate response Isochronous and droop operation Forward acting actuator output Starting fuel & speed ramp adjustments Overspeed alarm output Adjustable rated and idle speeds External speed adjustment input Speed sensor failure detection Battery reverse voltage protection Output short circuit protection Dimensions (130x110x27mm)

15 MULTI GENSET PARALLELING UNITS DKG 707 Basic multi-genset synchronization and load share unit (up to 8 gensets) Both active and reactive load sharing J1939 CANBUS electronic engine support True RMS genset and busbar AC measurements Built-in Governor control Fully isolated built-in AVR control Fully isolated data link communication port Soft loading and unloading of gensets Equal aging of gensets Programmable Logic functions Battery backed-up real time clock Built-in daily, weekly, monthly exerciser 500 event logs with time stamp and full snapshot Free MS-Windows Remote monitoring software Isolated RS-485 MODBUS Support through optional USB adaptor Output expansion capability Dimensions: 235 x 167 x 48mm (WxHxD) DKG 707 DKG 727 DKG 727 Basic mains synchronization unit Multi genset soft transfer to / from mains Multi genset power export to mains Multi genset peak lopping (peak shaving) Heavy Duty Feature True RMS mains and busbar AC measurements G-59 mains protections Programmable Logic functions Fully isolated datalink communication port Battery backed-up real time clock Built-in daily, weekly, monthly exerciser 500 event logs with time stamp and full snapshot Free MS-Windows Remote monitoring SW Isolated RS-485 MODBUS Support throughoptional USB adaptor Output expansion capability Dimensions: 235 x 167 x 48mm (WxHxD) HMI 7000 HMI 7000 Display gloriously 7 inch 800x480 pixels color TFT LCD Touch Screen Panel RS232 and RS485(2w/4w) connections Multiple gensets within the same load sharing system can be viewed Configurable kw and kvar trend records Configurable gauge limits Compatible with all LCD display Datakom models Built-in flash memory and Real Time Clock USB Host port for mouse and keyboard connection USB device port for PC connection User programmable with free Scada based software NEMA4/IP65 compliant front panel Dimensions: 200 x 146 x 42.5mm

16 AUTOMATIC TRANSFER SWITCHES DKG 171 DKG 171 The basic ATS controller Provides Remote Start signal for engine controller Mains / genset voltage inputs: 3 / 1 Relay outputs: MC, GC, remote start Factory set timers Adjustable mains and genset low limits Genset test mode available Dimensions: 72x72x38mm (WxHxD) DKG 173 DKG 173 DIN Rail ATS controller without DC supply Provides Remote Start signal for engine controller Mains / genset voltage inputs: 3/ 1 16Amp MCB, GCB and remote start output Adjustable MCB and GCB delays Isolated mains and genset inputs Installation: DIN Rail mounted. Dimensions: 70x115x66mm (WxHxD) DKG 329 DKG 329 High Performance ATS controller Synch check and no-break transfer Mains / genset voltage inputs: 3 / 3 Load current transformer inputs: 3 Digital inputs: 7 Digital outputs: 6 3 level password support Load KW and PF measurement Battery backed-up real time clock, Built-in Daily / weekly / monthly exerciser GSM SMS message sending on fault Modem calls on fault MODBUS communications Dimensions: 172 x 134 x 46 mm (WxHxD)

17 BATTERY CHARGERS 123 / 124 / 125 /1210 / 242 / 243 / 245 / 2410 SMPS SMPS-123 SMPS-124 SMPS-125 SMPS-1210 SMPS-242 SMPS-243 SMPS-245 SMPS-2410 DIN RAIL DIN RAIL volts amps DIN RAIL MOUNTED SMPS series are fixed output voltage, current limited lead acid battery chargers specially designed for permanent connection to genset starter batteries. They maintain the batteries fully charged, without overcharging or gassing. The chargers are designed in switchmode technology. Their rugged design allows surviving in harsh electromagnetic environments found in automotive industry. The low weight of the unit makes it ideal for use in highly vibrating generator control panels. The small dimensions allow compact panel design. Thanks to their high efficiency, the self- heating of the chargers is kept in minimum levels allowing operation in warm environments. 100 KHz switchmode architecture, Float charging system, Constant voltage output, Current limited, Rugged design for industrial environments, Rectifier fail output Boost charge input Short circuit protection Overload protection High temperature protection Plug-in connection system Output voltage and current display option Operating voltage range: VAC Operating frequency range: Hz Operating temp range: -20 to +70 C

18 DC GENSET CONTROLLERS DKG 379 DKG 379 The intelligent DC genset controller Controls charge voltage, charge current and engine rpm dynamically in order to match the exact required value. İntelligent charging algorithm, provides longer battery life 7A-DC power drive output ECU connection through J1939-CANBUS option 0-10V analog control output Compatible with 24V and 48V systems Battery temperature input for PT100 sensor Dual genset mutual standby operation Battery backed-up real time clock Built in daily / weekly / monthly exerciser GSM SMS message sending on fault Modem calls on fault MODBUS communications Dimensions: 172x134x76mm STATUS ALARM WARNING SERVICE REQUEST SERVICE REQUEST WARNING ALARM TEST TEST STATUS RUN RUN PGM PGM A AUTO AUTO A DKG 379 LOAD GENSET STOP STOP GENSET LOAD DKG 379 EARTHQUAKE DETECTOR UNITS DSD 050 DSD 050 Earthquake Shut-off System The DSD-050 is an earthquake shut-off system based on micromachined polysilicon acceleration sensors Direct connection to electromechanical solenoid valves Internal 12Vdc battery and battery charger Seismic properties conformal to ANSI Z (1981) and ASCE Non-seismic accelerations filtered Capable of performing self-test Maintenance free DSD 060 DSD 060 Earthquake Detector Based on micromachined polysilicon acceleration sensors, the DSD-050 detects seismic acceleration and generates control signals to shutdown any critical devices. Seismic properties conform to ANSI Z and ASCE Non-seismic accelerations filtered Capable of performing self-test Maintenance free Standard and high sensitivity detection relay outputs Operates on 10 to 30 volts DC Resin molded design

19 ALTERNATOR VOLTAGE REGULATORS AVR 5 AVR 12 AVR 20 Dimensions: 126x68x35mm AVR 8 AVR 40 Dimensions: 133x98x35mm Dimensions: 133x98x82mm AVR 5 AVR 12 AVR 20 AVR 8 AVR AVR 40 Half wave thyristor output Continuous output current Minimum voltage input (VAC) Maximum voltage input Max output L-N Volt adjust potentiometer Remote voltage trimmer input Stability adjustment potentiometer 50 / 60 Hz compatible Low frequency protection Analog volt adjust input for load share CT input for droop operation Output overload protection High temperature protection Voltage sensing loss protection Adjustable output overload limit (opt) Isolated sensing voltage input 5A 10A 20A 8A 8A V 115V 115V 115V 200V 40A V

20 DATAKOM Electronics Limited Tel: Fax: datakom@datakom.com.tr