VFD E Series. Features

Transcription

1 VFD E Series Output Frequency : 0.1 ~ 600 Hz. Built in PLC Function 500 Step program in Ladder Language. Side by side installation. Easy maintenance. Modular & Compact Design. Built-in MODBUS communication. External Keypad available. Optional Field module. Flexible Extension. Common DC Bus Application. Comply with ROHS. Build-in EMI Filter/li> 415V / 3 Phase 1HP ~ 100HP VFD F Series

2 Output frequency 0.1~120 Hz. Cost effective. Variable Torque. Automatic torque boost & slip compensation. Output frequency 0.1~ 120Hz. PID feedback control. Pump control & automatic energy - saving. Communication interface RS-485 (Baud rate 38400). Free run or ramp stop. Controlled reversing. Adjustable V/F curve and automatic voltage regulation. 415V / 3 Phase 7.5 HP ~ 300 HP VFD M-Z Series SVC Micro Drive Special for Trade Mill application 16 - bit CPU, SPWM Control. Output frequency up to 400 Hz for speed change. External Keypad available. Low noise, carrier frequency from 1 to 16 KHz. Sensorless vector control, low speed & high torque. Auto voltage regulation. Adjustable LV Level. Analog & pulse speed change. Communication interface RS-485 (Baud rate 38400). Reverse inhibit function.

3 VFD L Series Low noise; carrier frequency up to 10kHz. Controlled reversing. 2 inputs and 1 output terminal for external controls. Adjustable V/F curve. Adjustable accel/decel time. RS-485 communication (Baud rate 9600). Option: Programmable Keypad (VFD-PU02). Built-in EMI Filter. 230V / 1 Phase 0.05 HP ~ 2 HP VFD M Series

4 SVC Micro Drive Automatic torque boost & slip compensation. Output frequency 0.1~ 400Hz. Low noise carrier frequency up to 15kHz. Process follower 0~10VDC, 4~20 ma. Communication interface RS 485 ( Baud Rate 38400). Energy saving & automatic voltage regulation. Adjustable V/F curve and Simple vector control. PID feedback control. Simple position control. Sleep / Revival function build-in. 230V / 1 Phase 0.05 HP ~ 3 HP 415V / 3 Phase 1 HP ~ 10 HP VFD M-D Series SVC Micro Drive Special for elevator door application

5 The drive run with open Loop and close loop function. The drive run with Encoder. In built PG card. V/F and Vector base control method. Motor auto tuning and Door width auto tuning function. S curve for smooth operation. Adjustable curve of door open and close function. Use with external controller due to specific inputs/outputs Various protection function, safe and reliable. IP20, compact, easy to install. Convenient to adjust and maintain. VFD S Series Simply Type Automatic torque boost & slip compensation. Output frequency 0.1~ 400Hz. Low noise carrier frequency up to 10kHz. Process follower 0~10VDC, 4~20 ma. MODBUS communication RS 485 ( Baud Rate 38400). Coast or ramp to stop. Momentary power failure restart & fault restart. Adjustable V/F curve and automatic voltage regulation. Sleep / Revival function. 230V / 1 Phase 0.25 HP ~ 3 HP 415V / 3 Phase 0.5 HP ~ 3 HP

6 VFD V Series Field Oriented AC Drive Flux Vector Control AC Drive. Output frequency : 0 ~ 3000 Hz. Orientation function for spindle motor. Special parameter for winder/unwinder application. V/F, FOC+PG, SVC, Torque+PG, Position control. 150 % holding torque with speed feedback. Starting torque is 150% at 0.5 Hz. Overload : 150% for 1 minute & 200% for 2 second. PG close-loop control, speed control range 1: independent S-curve/ accel. /decal. time setting. 10 communication address for block transfer. Constant torque and variable torque selection. 4 Selectable fault output options. Maximum Torque Limit 200%. 4 Selectable fault output options. Auto Energy saving at light load. ACI/AVI2 selection. ome search, Pulse command and 16 point positions control. 415V / 3 Phase 1 HP ~ 100 HP

7 VFD VE Series Field Oriented AC Drive Flux Vector Control AC Drive. Output frequency : 0 ~ 3000 Hz. Orientation function for spindle motor. Special parameter for winder/unwinder application. V/F, FOC+PG, SVC, Torque+PG, Position control. 150 % holding torque with speed feedback. Starting torque is 150% at 0.5 Hz. Overload : 150% for 1 minute & 200% for 2 second. PG close-loop control, speed control range 1: independent S-curve/ accel. /decal. time setting. 10 communication address for block transfer. Constant torque and variable torque selection. 4 Selectable fault output options. Maximum Torque Limit 200%. 4 Selectable fault output options. Auto Energy saving at light load. ACI/AVI2 selection. ome search, Pulse command and 16 point positions control. 415V / 3 Phase 1 HP ~ 100 HP VFD EL Series

8 Compact Multi-Function Output Frequency : 0.1~600Hz. 3 Points adjustable V/F Curve. Low Noise Carrier frequency upto 12 KHz. Process Flower 0~10V DC, 4~20mA. 6 multifunction input. Built in EMI Filter. Built in RS-485 Serial Interface. NPN / PNP Selection. PID Feedback Control. 1st / 2nd frequency selection. 15 Step preset speed. Auto Energy saving function. 230V / 1 Phase 0.25 HP ~ 3 HP 415V / 3 Phase 0.5 HP ~ 5 HP VFD VL Series

9 Specially for Lift Application High performance field oriented control(foc). Design for Induction motor & permanent magnet synchronous motor. AC PM Synchronous motors, it can auto detect the position of magnetic pole when start-up Support emergency rescue system; supply DC48/96V low voltage operation (EPS). 5 Point adjustable V/F, Field Oriented Control+PG, Sensorless Vector Control, Torque+PG, Position control. 4 independent S-curve/ accel. /decal. time setting. Include auto tuning, starting torque loading compensation function. Built in elevator start/stop control operation procedure. Built in adjustable elevator braking contact outputs. Support digital LED keyboard programmable function. Include dynamic and static motor parameter auto tuning function. All series built in braking resistor unit. Support ABZ, LINE DRIVE and SIN, COS encoder (absolute). RS-485 & CANbus serial interface. Provide PC computer network connection monitoring, parameter storing, restoring, and printing function. Complete Protection Function by high precision current detection. Auto reset after fault, speed search function and motor overheat protection by thermistor. 415V / 3 Phase 7.5 HP ~ 30 HP