Mechanical drilling rig Equipment

Transcription

1 Mechanical drilling rig Equipment Always ready for your business

2 Bentec rigs and drilling rig equipment Bentec branches bentec solutions "made in germany" Design and manufacture of drilling rigs for worldwide use Manufacture of mechanical and electrical main equipment and systems After Sales Service Service, repair and overhaul Spare parts supply and logistics Upgrades Recertification System integration and commissioning Global project management BENTEC Advanced Technology for comprehensive drilling solutions. With years of experience, Bentec is one of the world s leading manufacturers of high-quality drilling and workover rigs. Our portfolio includes mechanical and electrical main equipment and systems. Bentec produces a full range of land rigs and drilling rig components and has been supplying packages that are successfully operating in all of the world s major oil fields. Bentec designs and manufactures a wide range of durable, cost-effective and trouble-free drilling rigs and and drilling rig components for harsh and hostile environments ranging from light units to heavy-duty ones with drawwork capacities of up to 3000 hp. Bentec possesses an unparalleled capability in the design, manufacture, installation, commissioning, and aftermarket service for a wide variety of drilling systems and equipment. We deliver high-grade mechanical drilling components like Top Drives, Drawworks, Drive Systems, Mud Pumps and Pipe Handling Equipment. Our electrical equipment includes Power Control Rooms, infodrill, Anti Collision Systems, Soft Torque Rotary Systems, and Soft Pump Systems. Bentec also provides comprehensive drilling solutions that include technically advanced, field-proven equipment integrated into systems. Our products increase drilling efficiency, enhance Health, Safety, and Environmental (HSE) programs, and maximize our customers life cycle economics. We specialize in designing and manufacturing customized solutions tailored to your individual requirements. Our engineers continue to develop innovative drilling rig systems that can withstand any environmental challenge.

3 Top DriveS Bentec Top Drives are specially designed for rough conditions and less rig down time. Suitable for onshore or offshore rigs. Available capacities: 275 ton 350 ton 500 ton 750 ton 25% more torque capacity than competitors 2 times more link tilt capacity than competitors Climate range: -45 C to +55 C* Suitable for arctic&desert environment Suitable for onshore or offshore rigs Lowest possible noise emission HSE improvements / risk assessment Native pipehandling monitoring CE&ATEX conformity Optional with remote monitoring service Bentec combined all of its experience from 20 years of commissioning, maintaining and repairing other top drives to develop a more reliable, robust and service-friendly product for safe drilling operations. The Bentec Top Drives are exactly tuned to the needs of our customers: 25% more torque drive than others. Robustly and reliably built, even down to -45 C, reducing downtime and maintenance costs significantly. The Bentec Top Drives are AC-powered and developed for use as a portable or permanently installed unit on land and offshore applications. It also comes with a number of innovative features to significantly improve drilling results. The Bentec Top Drive system is driven by a variable frequency drive (VFD) control system for a wide range of torque and speed performance. The main components include an integrated swivel, a special high safety link tilt system, remote and manual IBOP valves, a back-up clamp for making and breaking connections, a guide beam for drill torque reaction, and an electrical service loop. A compact, integrated hydraulic power unit mounted on the top drive eliminates the need for hydraulic service loops. The compact dimensions of Bentec Top Drives ensure easy installation into existing or new rigs. All Bentec Top Drives can be delivered optionally with a VFD container and can be equipped with a Bentec Soft Torque System. The Bentec Top Drive system complies with the strictest standards for the drilling industry. The Bentec Top Drive design conforms to the newest European CE design standards and international API standards to help our customers maintain a very high safety level. TECHNICAL DATA Bentec Top Drives Description TD-275-HT TD-350 HT TD-500-XT TD-750-hT API load capacity: Power rating: Drilling torque: Make-up/ break-out torque: 275 ton / 250 t 672 hp / 500 kw ft-lbs / Nm ft-lbs / Nm 350 ton / 317 t 1030 hp/ 758 kw ft-lbs / Nm ft-lbs / Nm *(arctic temperature kit applies from -30 C) 500 ton / 453 t hp/ 850 kw ft-lbs / Nm ft-lbs / Nm 750 ton / 680 t hp/ 1200 kw ft-lbs / Nm ft-lbs / Nm

4 IRON ROUGHNECK The Bentec IRON ROUGHNECK is built to maximise the efficiency of pipe handling operations. It provides a safe and versatile alternative to conventional pipe connection techniques for make-up/break-out operations. Available MODELS: ir b Basic Design 5-ft Reach IR B Basic Design 8-ft Reach All models can be upgraded to a remote-controlled premium unit comprising all unique features Precise high torque measurement A unique tool joint finder enables automatic pre-positioning Torque readout system for automatic make-up/break-out operations Hydraulically powered and electrically controlled unit Tool joint anti-collision system E-Torque List an electronic recording and storage tool Central lubrication system Spin out sensor Dynamic clamping system Interchangeable with competitors iron roughnecks Available for onshore and offshore rigs Compact design HSE improvements due to automatic positioning CE & ATEX conformity Over the last 40 years, Bentec has developed an impressive portfolio of automated tubular running operations in order to build more robust and reliable Iron Roughneck that reduce both downtime and maintenance. Bentec s iron roughnecks are designed to comply with the latest European CE design standards, ATEX conformity, and international API standards to maintain the highest level of industry safety. The Iron Roughneck is available in two versions. The basic design is simple and robust for safe drilling operations. This design includes all essential functions for making-up and breaking-out tool joint connections. The premium design is electrically or hydraulically operated. This design includes automation features like the tool joint finder, positioning system, and torque readout system for partly or fully automatic make/break operations. The compact dimensions of the Bentec IRON ROUGHNECK make it easy to install in existing and new rigs. The design allows for easy interchangeability with competitors iron roughnecks. Both Iron Roughneck versions are developed for use as a portable unit on land rigs or permanent installation on offshore rigs. The system is powered by the existing rig hydraulic power unit. A separate hydraulic power unit is also available. TECHNICAL DATA BENTEC IRON ROUGHNECK Max. make-up torque: ft-lbs/ Nm Max. break-out torque: ft-lbs/ Nm Spinner max. torque with 5 DP: ft-lbs/4 070 Nm Tool joint connection O.D. range: 3 1 /8 to 9 3 /4 Reach: 5 ft/1 524 mm or 8 ft/2 438 mm

5 GEAR-DRIVEN DRAWWORKS Bentec gear-driven drawworks are modular, lightweight, small-dimensioned, quiet and easy to maintain. Suitable for onshore or offshore applications. Available with Bentec Feed-Off Control System. gear-driven drawworks Double-speed Single-speed Air-cooled eddy current brake No eddy current brake Single-speed gearbox for small footprint and reduced weight Available capacities: 1000 hp / hp gear-driven drawworks general features Control system for safe operation Temperature-controlled blowers reduce noise level No hydraulics No water Air-operated spring set disc brake (failsafe) Local control panel for safe cut and slip operation Components manufactured according to API 7K Climate range: -40 C to +55 C Suitable for artic & desert environment Suitable for onshore or offshore rigs CE conformity ATEX conformity on request The Bentec GEAR-DRIVEN DRAWWORKS were developed to provide the market with more reliable technology and more hoisting performance. Their light weight and small dimensions make them ideal for frequent rig moves or limited offshore crane capacity. Due to our decades of experience in designing and manufacturing drilling equipment, the Bentec GEAR-DRIVEN DRAWWORKS are equipped with modern AC or DC motor technology developed in-house. Bentec also reduces the number of sensors to a useful level. The Bentec GEAR-DRIVEN DRAWWORKS need only electrical power and air. No water or hydraulics are necessary, which simplifies the drawworks significantly. Bentec provides many drawworks solutions to meet our customers requirements for rigs, whether existing or newly built. All of these advantages make the Bentec GEAR-DRIVEN DRAWWORKS the best choice. A drawworks is just a winch but equipped with modern and reliable technology, it offers the best performance. Technical Data Single-speed DW-E-200- AC-SG hp (kw) (735) DW-E-250- AC-SG (920) DW-E-300- AC-SG (920) DW-E-350- AC-SG (1 100) Drive Technology AC AC DC AC AC Max. line pull 1 st layer lbf (kn) (220) Weight lbs (t) (29) (276) (30) (332) (39.5) (351) (30) DW-E-450- AC-SG (1 470) (419) (35) Technical Data Double-speed DW-E-1250 AC or DC DW-E-1500 AC or DC DW-E-2000 AC or DC DW-E-2300 AC DW-E-2500 AC DW-E-2500 AC hp (kw) (735) (920) (920) (1 100) (1 470) (1 470) Drive Technology AC or DC AC or DC AC or DC AC AC AC Max. line pull 1 st layer lbf (kn) (334) (334) (388) (373) (468) (430) (468) (468) (653) Weight lbs (t) (38) (38) (42) (42) (43) (45) (43) (44) (60) AC-Design DC-Design

6 MUD PUMPS Bentec mud pumps stand for new technology, more reliability and reduced maintenance. Available capacities: hp / PSI hp / PSI hp / PSI Unique Features Direct-driven external gearbox No internal gear Patented liner clamping Fast valve clamping Small footprint Usable for on-&offshore Climate range: -40 C to +55 C Components manufactured according to API 7K CE conformity and are available worldwide. A handling crane makes it easy to handle the fluid end components. Furthermore, Bentec uses patented liner and valve clamping technology to reduce the maintenance time significantly. A quick-change liner and piston system serves for easy maintenance. A special feature of the Bentec mud pump is the side-mounted gear drive. This design eliminates the need for any chain or belt tensioning systems. The two-stage helical gear feeds directly into a forged/welded crankshaft, which is balanced and provides quiet and vibration-reduced operation. Bentec developed the idea of mud pumps completely new. The mud pumps are equipped with a direct-drive gearbox, a motor developed in-house, and state-ofthe-art pump housing. There is no longer any need for an internal gear with all of its disadvantages today, and no more belt tensioning. Bentec mud pumps are reduced to the task they are made for - pump operations. Bentec mud pumps are light-weight and have a small footprint. The hp AC-powered motor is top-mounted. The pump is available with or PSI fluid ends and all of its parts subject to wear and tear meet API standards Liner cooling and gear oiler systems are included; a supercharge pump and a noise reduction package can be installed upon request. Especially for noisesensitive environments like offshore or densely populated locations, the Bentec mud pump is the right choice. Along with the supply of mud pumps, Bentec acts as a system supplier. Pumps can be delivered together with a Bentec Power Control System and the Bentec Soft Pump System. Technical Data MUD PUMPS hp (kw) 1600 (1 200) 1600 (1 200) 1600 (1 200) 2200 (1 640) PSI max Drive Technology AC AC DC AC Arrangement top-mounted rear-mounted rear-mounted top-mounted Weight lbs (t) (44) (34.5) (39.5) (46)

7 Catwalk Systems LED Lighting System Spill Containment System Utility Winch Walking System Junk Basket HYDRAULIC CATHEAD Remote control module enables pressure regulation Cylinder operation from a safe and convenient location on the rig Simple hydraulic circuit ensures trouble free performance Simplified design allows long time between maintenance Reduces manual pipe handling. Deep-Temperature Kit Wireless Control Console Rig floor equipment for smooth and adjustable make-up loads. intervals Climate range: -40 C to +55 C Suitable for artic and desert environment Suitable for onshore and offshore rigs CE conformity ATEX conformity on request The Bentec CATWALK SYSTEMS simplify and speed up pipe handling from the pipe rack to the drill floor. By lifting the pipes to the drill floor, they can be directly picked up by an elevator, no time-consuming interim storage in the mouse hole is necessary. This useful rig floor equipment provides smooth, adjustable make-up loads. Due to its hydraulic operation, the Bentec HYDRAULIC CATHEAD eliminates electrical hazards. The system can be powered by an independent hydraulic power unit or integrated into a centralized hydraulic Personnel on the drill floor operate the Bentec CATWALK SYSTEM by a power unit. remote control panel, eliminating any risk to their safety. Bentec s allencompassing service includes training operating crews on commission. The pulling force provided by the Bentec HYDRAULIC CATHEAD ensures correct and sufficient make-up and break-out torque for drill pipe, drill collars, bit connection, or other applications. Technical Data CATWALK SYSTEMS Technical Data hydraulic cathead Type Mechanized Hydraulic EU-Design Hydraulic Desert-Design Max tubular diameter in (mm) 20 (508) 20 (508) 20 (508) Max tubular length ft (mm) 48 (14.6) 48 (14.6) 48 (14.6) Max tubular weight lbs (t) (3.5) (3.6) (3.6) Weight lbs (t) (38.0) (28) (33) Operation length ft (m) 65.6 (20.0) 61.0 (18.7) 72.8 (22.2) Min. temperature range -4 F (-20 C) -4 F (-20 C) -4 F (-20 C) Max. temperature range 104 F (+40 C) 104 F (+40 C) 131 F (+55 C) max. line pull line stroke lbs / 140 kn 4.92 in / mm

8 Rig Walking System Bentec Rig Walking System for moving mast and substructure in any direction with full setback. AVAILABLE MODELS: RWS-300-EXT Simplified moving system reduces maintenance significantly Walking speed 46 ft/hr (14 m/hr) The rig can walk in 20 different directions within 360 Lifting capacity of lbs (300 t) per unit Total lift capacity of lbs (1 200 t) Wireless remote control console Compatible with widest range of rig designs Integration with rig hydraulic power unit possible Compact design Climate range: -45 C to +55 C HSE improvement/risk assessment CE and ATEX conformity Optional with remote monitoring service Bentec s Rig Walking System provides a solution for reducing rigmoving times on multi-well applications. The move of the complete rig to the next well thus requires less cranes and manpower. The Bentec Rig Walking System complies with the latest European and international standards, maintaining highest levels of HSE. Compatible with a wide range of rig designs, our Rig Walking System can be adapted to both existing and new-built rigs. It consists of four units, which are secured directly to the substructure. The lift and slide system is operated by hydraulic cylinders to move the rig including drill floor equipment and full setback to the desired position step by step. The Bentec Rig Walking System features a reliable and robust design Made in Germany and is ideal for drilling rigs on pad drilling or cluster well operations. The system is controlled via a remote control console and can be operated with the existing rig hydraulic power unit. If required, a separate hydraulic power unit is also available. Technical Data Rig Walking system Total lifting capacity: lbs (1 200 t) Lifting capacity per unit: lbs (300 t) Walking Speed: 46 /14 m per hour

9 DEADLINE ANCHOR Standard deadline anchors of different sizes and capacities as left-hand and right-hand design. Custom-made deadline anchors are also available. Available capacities: TRAVELING pounds deadline pull Heavy-duty, high-grade structural steel Tapered roller anti-friction bearings Bronze wireline clamp Machined grooved drum Left-hand models available Deadline anchor manufactured according to API 8C CE conformity ATEX conformity on request BLOCK Compact design to enhance performance and operability. Heavy duty, high grade structural steel Flame hardened grooves High quality tapered roller bearings for sheaves Shaft with individual grease passage to each roller bearing Traveling Block manufactured according to API 8C Climate range: -45 C to +55 C Suitable for artic & desert environment Suitable for onshore or offshore rigs CE conformity ATEX conformity on request Designed to be used with compression load cells, the Bentec Bentec designs and manufactures a large range of Bentec TRAVELING DEADLINE ANCHORS are made from high-grade structural steel for BLOCKS to meet your specific drilling requirements. Sufficient weigh- operation in harsh work environments from -40 C up to +55 C. ting ensures fast free fall. Compact and streamlined design eliminates interference with mast or derrick components. The Bentec DEADLINE ANCHORS are designed, fabricated and tested in Bentec s own yard with its high-quality manufacturing standard and in Long service life is achieved through quality fabrication and careful se- accordance with API 8C. lection of components. Apart from our standard range of products, low temperature design is available on request. TECHNICAL DATA Traveling block Technical Data Deadline Anchor Model Line Pull Wireline Drum Dia. lbf (kn) Size in (mm) in (mm) Mounting Model Load rating ton (t) Number of sheaves Sheave O.D in (mm) Line size in (mm) TB (227) 5 36 (914) 1 1/8 (29) 1 1/4 (32) DA-100-W-1 1/ (445) DA-100-W-1 3/ (445) DA-100-W-1 1/ (445) DA-60-W-1 1/ (267) DA-60-W-1 1/ (267) 11/2 (38) 28 (711) Wall 13/8 (35) 28 (711) Wall 11/4 (32) 28 (711) Wall 11/4 (32) 24 (610) Wall 11/8 (28) 24 (610) Wall TB (318) 5 42 (1 067) 1 1/8 (29) 1 1/4 (32) TB (318) 6 42 (1 067) 1 1/8 (29) 1 1/4 (32) TB (363) 5 50 (1 270) 1 1/4 (32) 1 3/8 (35) TB (363) 6 50 (1 270) 1 1/4 (32) 1 3/8 (35) TB (500) 6 52 (1 321) 1 1/2 (38) 1 3/8 (35) TB (500) 6 60 (1 524) 1 3/8 (35) 1 1/2 (38) TB (500) 7 60 (1 524) 1 3/8 (35) 1 1/2 (38) TB (590) 7 60 (1 524) 1 1/2 (38) 1 5/8 (42) TB (680) 7 60 (1 524) 1 1/2 (38) 1 5/8 (42)

10 Pipe Guide Arm The Bentec PIPE GUIDE ARM is specially designed to improve the HSE level of onshore and offshore rigs by reducing handson tubular handling. HSE improvement individuals are kept out of harm s way Teachable stabbing function & positioning Climate range: -20 C to +45 C Available for arctic & desert environments Suitable for onshore or offshore rigs CE & ATEX conformity Increases Hands-off operation during vertical pipe handling Bentec combined its experience from 20 years of commissioning, maintaining, and repairing drilling equipment to develop a more reliable, robust, and service-friendly product for safe drilling operations. The Bentec PIPE GUIDE ARM is precisely tuned to the needs of our customers. The pipe guide arm is designed exclusively for use on deep drilling rigs. It guides the drill pipe or casing from the handover position at the V door to the center of the well, but can also be arranged to move the drill pipe from the center of the well back to the handover position at the V door. The Bentec PIPE GUIDE ARM is moved via a hydraulic and telescopic cylinder. It is specially designed for rough conditions and provides a higher HSE level. Technical Data Pipe guide arm min. pipe handling diameter: 2 7/8 in / 73 mm max. pipe handling diameter: 20 in / 508 mm Hands-on manipulation of the tubes is no longer necessary: The pipe guide arm significantly reduces possible accidents according to IADC Safety Statistics Report. max. drillpipe weight: lbs / 3.0 t The pipe guide arm is suitable for all onshore and offshore rigs.

11 Bentec GmbH Drilling & Oilfield Systems Deilmannstrasse Bad Bentheim Germany Phone: +49 (0) info@bentec.com Issue: February 2016 LLC Bentec Tyumen, Russia 2 km from Stary Tobolsky Trakt 8 a Tyumen Russia Phone: +7 (0) Service Hotline: +7 (0) tyumen@bentec.com Russia Representation Office 1. Kasatschij per Moscow Russia Phone: +7 (0) or 239 Fax: +7 (0) moscow@bentec.com LLC IDTEC, Oman Office Muskat P.O. Box Al Kuwair Postal Code 133 Sultanate of Oman Phone: +968 (0) mick@idtecoman.com