LED Driver and Fluorescent Ballast

Size: px

Start display at page:

Download "LED Driver and Fluorescent Ballast"

Elisabeth Barton
5 years ago
Views:

A history of sustainability, innovation, and quality Sustainability At Lutron, sustainability is not a new concept.

Our philosophy Lutron is a company built on a belief in taking care of the people: customers, employees, and the community.

For over 50 years, we have met and exceeded the highest standards of quality and service. Every one of our products is quality-tested before it leaves the factory.

1 A history of sustainability, innovation, and quality Sustainability At Lutron, sustainability is not a new concept. Since 96, we have been designing industry-leading technology that saves energy and reduces greenhouse gas emissions. We re also a proud member of the U.S. Green Building ouncil. Our philosophy Lutron is a company built on a belief in taking care of the people: customers, employees, and the community. We innovate in advance of emerging market needs and continually improve our quality, our delivery, and our value. SM Innovation Lutron owns over,700 patents and manufactures more than 5,000 products. For over 50 years, we have met and exceeded the highest standards of quality and service. Every one of our products is quality-tested before it leaves the factory. Global service and support You can count on a level of support unequaled anywhere in the industry and anywhere in the world. Lutron provides 4/7 technical phone support. Lutron Field Service, made up of a global network of customer-focused field service engineers, provides world-class services that begin before your building is commissioned and continue throughout the life of your building. World Headquarters Technical Support enter (Available 4/7) ustomer Service.888.LUTRON Lighting ontrol Institute: Field Service: LED enter of Excellence leds@lutron.com LED Driver and Fluorescent Selection Guide /04 Lutron Electronics o., Inc. P/N REV F

Lutron Drivers and ballasts Lutron Table of contents LED Driver and Fluorescent Selection Guide Introduction Scalable light management solutions 4 Understanding Lutron drivers and ballasts 0

2 Lutron Drivers and ballasts Lutron Table of contents LED Driver and Fluorescent Selection Guide Introduction Scalable light management solutions 4 Understanding Lutron drivers and ballasts 0 Energy-saving strategies ontrol options 4 compatibility Fluorescent ballasts 44 Eco H-Series ballasts (UL, E, SA,, and INMETRO models) 46 Hi-lume 3D ballasts 48 Eco ballasts 50 Eco compact ballasts Innovation and quality from the world leader in lighting controls Lutron invented the world s first electronic dimming ballast more than 30 years ago, and continues to lead the industry with innovative and energy-saving LED and fluorescent dimming products. The company offers an extensive selection of ballasts, drivers, and controls, providing complete LED and fluorescent dimming solutions. The LED Driver and Fluorescent Selection Guide helps you: Determine the dimming range required for your application Incorporate energy-saving strategies hoose the appropriate Lutron dimming ballast or LED driver Find and/or configure the driver or ballast that best fits your project: For fixtures using Lutron LED drivers: For drivers: For ballasts: Drivers and ballasts 6 Quick reference guide LED drivers 30 Eco H-Series LED drivers (UL models) 3 Hi-lume A-Series LED drivers (UL & SA) 34 Eco LED drivers (E models) 36 Eco 5-Series LED drivers (UL and cul models) 38 Eco 5-Series LED drivers (E models) 40 Hi-lume A-Series LED drivers (PSE) 4 Eco 5-Series LED drivers (PSE) Model numbers 5 LED driver model numbers 65 OEM design components 66 QuickFigTM manufacturing configuration kits 68 Fluorescent ballast model numbers 88 models by country Appendix 90 Related products 9 ontrol wiring diagrams 00 Sensor control wiring 0 Lamp wiring diagrams 04 Discontinued drivers and ballasts 6 Obsolete case dimensions 8 Voltages by country Glossary 6 ontrol options by LED driver and ballast type D Lutron Lutron

Lutron Scalable light management solutions Lutron Scalable light management solutions Solutions for projects of every size Applications The extensive selection of Lutron ballasts, drivers, and

Drivers Offers smooth, continuous dimming to % or 5% measured light output for virtually any LED fixture Works with Lutron -wire forward phase controls, 3-wire fluorescent controls, Eco digital

Available for %, 5%, and 0% low-end dimming levels, suitable for a variety of applications ompatible with several lamp types including T8 linear and U-bent, T5, T5 HO linear, T5 twin-tube, T4

Act (BAA) models available for most models Single space Multiple rooms to multiple buildings Lutron offers an extensive selection of fluorescent ballasts and LED drivers, and can control a variety of

3 Lutron Scalable light management solutions Lutron Scalable light management solutions Solutions for projects of every size Applications The extensive selection of Lutron ballasts, drivers, and controls offers a flexible, energy-saving dimming solution that fits your needs. Drivers Offers smooth, continuous dimming to % or 5% measured light output for virtually any LED fixture Works with Lutron -wire forward phase controls, 3-wire fluorescent controls, Eco digital controls and DALI digital controls (E) Available in multiple form factors Supports > 5,000 current and voltage levels Models available with a smooth incandescent like fade to/from black from % s Available for %, 5%, and 0% low-end dimming levels, suitable for a variety of applications ompatible with several lamp types including T8 linear and U-bent, T5, T5 HO linear, T5 twin-tube, T4 compact, and select reduced-wattage lamps Digitally addressable dimming ballasts available, with easy set up and increased flexibility y-tuned ballast factor available for most models Buy American Act (BAA) models available for most models Single space Multiple rooms to multiple buildings Lutron offers an extensive selection of fluorescent ballasts and LED drivers, and can control a variety of sources including Eco, and 3-wire and -wire loads, down to % with a smooth fade to/from black for an incandescent-like experience. 0 0 V loads can also be controlled, with the dimming performance, dependent on the non-lutron 0 0 V driver/ballast manufacturer. All Lutron solutions offer code compliant, energy-saving options for new construction and retrofit projects. Lutron Lutron 3

4 Lutron Understanding Lutron drivers and ballasts Lutron Understanding Lutron drivers and ballasts Dimming LED light saves energy Lutron quality Like traditional light sources, dimming LEDs results in dramatic energy savings. Additionally, the already long life of LEDs can be further extended by dimming. Percent of Power Percent of Power 00% % % Measured Light Power consumed by LED source Dimming fluorescent light saves energy Fluorescent lighting uses much less power than incandescent lighting. In a typical installation, a 3 W compact fluorescent lamp provides approximately the same light output as a 00 W incandescent lamp. As both sources are dimmed, fluorescent lamps continue to be more energy efficient. Power consumed by incandescent source Over 60 W are saved per fixture by using fluorescent lamps Power consumed by fluorescent source Superior components Lutron drivers and ballasts are manufactured to the highest level of quality, using carefully selected components. Maximum lifetime is achieved by using only long-life components with significant performance history. Increased margins are incorporated into Lutron designs to help ensure that components are not operated outside of their specified limits. In many cases, Lutron works with component suppliers to design custom parts in order to improve overall driver and ballast reliability. 00% End-of-line testing Lutron tests the performance of every driver and ballast prior to shipment. This important step eliminates units that do not meet specifications. Extending lifetime All electronic drivers and ballasts use components with a finite lifetime. A major factor for driver and ballast lifetime is operating temperature. For every 0º reduction in case temperature, the lifetime of the driver or ballast will be doubled. Lutron dimming drivers and ballasts are designed to operate at a lower temperature, to maximize the lifetime of the driver or ballast. The operating temperature is influenced by the design of the driver or ballast, and by the characteristics of the fixture in which it is installed. Thermal foldback Lutron-patented Thermal Foldback Technology is included in most Lutron driver and ballast models. This feature actively monitors the driver or ballast temperature and adjusts the output power to ensure that the driver or ballast will meet its expected lifetime in thermally aggressive applications. When necessary, power delivery to the output is automatically reduced, or folded back, to regulate the driver or ballast temperature, with minimal impact on light output. Thermal foldback is designed to activate only if the driver or ballast is operated in an environment that exceeds its temperature. This technology prevents premature driver or ballast failure due to overheating. In a properly designed application, thermal foldback will not activate % Measured Light 4 Lutron Lutron 5

5 Failure Rate Lutron Understanding Lutron drivers and ballasts Lutron Understanding Lutron drivers and ballasts Lutron product reliability curve Measured light vs. perceived light ustomer receives Lutron ballast or driver Running ballasts or drivers0 cooler The human eye responds to low light levels by enlarging the pupil, allowing more light to enter the eye. This response results in a difference between measured and perceived light levels. A lamp that is dimmed to 0% of its maximum measured light output is perceived as being dimmed to only 3%. Likewise, a lamp dimmed to % is perceived to be at 0%. Normal Usage Lutron test and burn-in DOUBLES useful life For every 0 º reduction in driver or ballast case temperature, the driver or ballast lifetime will be doubled. Lutron dimming drivers and ballasts are designed to maximize the lifetime of the driver or ballast by operating components at least 0 º lower than the rated maximum temperature. Time Design example At full brightness, the measured light in a space is 60 foot-candles. At the lowest dimmed level, 0% perceived light is desired. % measured light is perceived as 0% (desired result) 5% measured light is perceived as % (x brighter than desired) 0% measured light is perceived as 3% (3x brighter than desired) 00% Fig. : omparison of measured and perceived light levels* Measured Light A smooth fade-on and fade off % Perceived Light * Rea MS The IESNA Lighting Handbook: Ninth Edition. The Illuminating Engineering Society of North America. New York. 6 Lutron Lutron 7

6 Lutron Understanding Lutron drivers and ballasts Lutron Understanding Lutron drivers and ballasts Selecting a Lutron driver or ballast Lutron offers several driver and ballast families that have various dimming levels and control options to suit any application. LED Drivers Fluorescent s Low-end dimming level ontrol options Driver family ompatible LED types Low-end dimming level ontrol options family Available lamp types % with fade-off/fade-on Eco digital link Eco digital link, 3-wire and -wire forward phase Eco H-Series LED driver Hi-lume A-Series LED driver Linear LED loads, up to 75 W Many LED loads, up to 53 W % Eco and DALI* digital link Eco digital link and 3-wire Eco H-Series Hi-lume 3D T8 linear and U-bent, T5 linear, T5 HO linear T8 linear and U-bent, T5 linear, T5 HO linear % 5% Eco digital link* -wire forward phase Eco digital link Eco digital link Eco digital link Eco LED driver (E, 0/40 V) Hi-lume A-Series LED driver (PSE, 00/00 V) Eco 5-Series LED driver Eco 5-Series LED driver (E, 0/40 V) Eco 5-Series LED driver (PSE, 00/00 V) Many LED loads, up to 5 W Many common LED loads, up to 3 W Many common LED loads, up to 75 W Many common LED loads, up to 50 W Many common LED loads, up to 35 W 5% 0% Eco digital link and 3-wire Eco digital link* and 3-wire (sensors wired directly to ballast) Eco compact Hi-lume 3D Eco Eco H0-Series T4 compact T5 twin-tube T8 linear and U-bent, T8 reduced wattage, T5 linear, T5 HO linear, T5 twin-tube, T5 twin-tube reduced wattage T8 reduced wattage**, T5 reduced wattage**, T5 HO reduced wattage** * DALI compliance available with Eco H-Series E ballast models only. ** H0-Series is a 0% low-end dimming solution for selected reduced wattage lamps; Lutron does not suggest mixing of different percentage ballasts in the same fixture/areas, as the difference in low end can cause an unsatisfactory look to the lighting in the space. 8 Lutron Lutron 9

Lutron Energy-saving strategies Lutron Energy-saving strategies Energy-saving control strategies using dimming drivers and ballasts: Additional energy-saving strategies 80% Max: 00% Max: 80%

Occupancy/vacancy sensing turns lights on when occupants are in a space and off when they vacate the space. Daylight harvesting dims electric lights when daylight is available to light the space.

Demand response automatically reduces lighting loads during peak electricity usage times. Williams A, et al. 0. Lighting ontrols in ommercial Buildings. Leukos. 8(3) pg 6 80.

7 Lutron Energy-saving strategies Lutron Energy-saving strategies Energy-saving control strategies using dimming drivers and ballasts: Additional energy-saving strategies 80% Max: 00% Max: 80% Occupied: On Full On Full On 7am: Dim Full On Vacant: Off Dim Dim 7pm: Off Dim High-end trim sets the maximum light level based on customer requirements in each space. Occupancy/vacancy sensing turns lights on when occupants are in a space and off when they vacate the space. Daylight harvesting dims electric lights when daylight is available to light the space. (See Lutron automated shades.) Personal dimming control gives occupants the ability to set the light level. Scheduling provides preprogrammed changes in light levels based on time of day. Demand response automatically reduces lighting loads during peak electricity usage times. Williams A, et al. 0. Lighting ontrols in ommercial Buildings. Leukos. 8(3) pg Typical lighting energy savings: 0 30% VonNieda B, Maniccia D, & Tweed A An analysis of the energy and cost savings potential of occupancy sensors for commercial lighting systems. Proceedings of the Illuminating Engineering Society. Paper #43. 3 Reinhart F. 00. Effects of interior design on the daylight availability in open plan offices. Study of the American ommission for an Energy Efficient Environment (AE) onference Proceedings. To achieve maximum lighting savings, automated shades are utilized. 4 Galasiu AD, et al Energy saving lighting control systems for open-plan offices: A field study. Leukos. 4() pg Energy savings estimated based on 50% reduction of after-hours lighting energy waste. Source: VonNieda B, Maniccia D, & Tweed A An analysis of the energy and cost savings potential of occupancy sensors for commercial lighting systems. Proceedings of the Illuminating Engineering Society. Paper #43. 6 Newsham GR & Birt B. 00. Demand-responsive lighting: a field study. Leukos. 6(3) pg Typical lighting energy savings: 0 60% Typical lighting energy savings: % Typical lighting energy savings: 4 0 0% Typical lighting energy savings: 5 0 0% Typical peak period savings: % Dimming fluorescent lamps and LEDs saves energy, but that is only the beginning of the energysaving features Lutron drivers and ballasts offer. Utilize one or more of the following to maximize energy efficiency: ode compliance with occupancy/vacancy sensors Lights on in unoccupied spaces account for a majority of a building s total energy usage. Lutron controls utilize wireless or wired occupancy/vacancy sensors with a QS sensor module. Optimize ballast/driver efficiency Low standby power: Eco ballasts and drivers offer extremely low standby power less than W of power is used when the light source is off. Some ballasts are available under 0.5 W Luminous efficacy: With more lamps per ballast, the required startup power is diffused over multiple lamps, conserving energy. The luminous efficacy of a 3-lamp 3 W ballast system is an impressive 00 lumens/watt. 3 Know your space The greatest energy savings can be achieved by deciding on the perfect number of lumens required for a space, avoiding over-lighting and wasted energy. ustom ballast factor: factor is the percentage of light output for a given lamp-ballast combination. By reducing the ballast factor, it is possible to achieve greater energy savings, meet lumen/foot specifications and even qualify for the highest levels of LEED. ustom ballast factors are available for: Eco H-Series, Hi lume 3D, Eco, and Eco compact. ustom ballast factor No detrimental effect on lamp life or UL Listing The ballast s printed rating and model number changes to reflect reduced energy consumption, producing lower wattage per square foot values and allowing for more ballasts on a given circuit Reduces ballast/lamp temperature 0 Lutron Lutron

8 Lutron ontrol options Lutron ontrol options Lutron driver and ballast control options In addition to offering drivers and ballasts with different low-end dimming levels, Lutron offers a variety of control options: digital link, -wire and 3-wire. Neutral Dimmed Hot Switched Hot 3-wire 3-wire control is a line-voltage phase control dimming method that communicates the dimming signal through a wire called Dimmed Hot. Neutral onstant Hot ontrol (E) ontrol (E) Eco digital link The Eco digital link is a wired communication technology that addresses individual drivers or ballasts to allow addressing, connection of multiple control devices, and control of drivers or ballasts individually or in groups. ontrol type Features Ideal applications Eco digital link Polarity insensitive May be wired in any topology May be run in same conduit with 0 77 V with line-voltage wiring Projects requiring digital control for individual fixture addressability Upgrade from analog 0 0 V control Multi-zone applications (lass ) or separately from the Small, retrofit applications using line voltage wiring (lass ) Lutron Energi TriPak solution Allows for rezoning without rewiring Available for: Eco H-Series LED drivers Hi-lume A-Series LED drivers Eco LED drivers (E)* Eco 5-Series LED drivers Data links are miswire protected Eco H-Series ballasts Hi-lume 3D ballasts Eco ballasts Eco compact ballasts Note: 0 0 V D controls are available from Lutron for control only of non-lutron 0 0 V D ballasts and drivers. The dimming performance is dependent on the driver/ballast manufacturer. * Offers DALI compatibility ontrol type Features Ideal applications 3-wire All three wires are rated lass and run within the same conduit Stable over long wire runs allowing for maximum circuit loading 3-Wire A-Series LED drivers can easily retrofit to existing 3-wire control systems Dimmed Hot control wire allows for more precise performance and less electrical noise Easy to wire Fluorescent dimming applications requiring precise control Available for: Hi-lume 3D ballasts Eco ballasts Eco compact ballasts Neutral Dimmed Hot Hi-lume ballasts Hi-lume A-Series LED drivers -wire forward phase Forward phase control is a line-voltage phase control dimming method that operates on two wires: Dimmed Hot and Neutral. ontrol type Features Ideal applications Forward phase Most commonly used for historic Retrofit projects incandescent and magnetic lowvoltage light sources system applications Residential and commercial Easy to wire Applications that have a neutral wire at the control or where a Lutron L dimmer is utilized Available for: Hi-lume A-Series LED drivers (LTE/0 V) Lutron Lutron 3

Lutron compatibility Lutron compatibility compatibility is based on the available control type for each driver and ballast family ontrol type Product family ompatible systems Eco digital link 3-wire

Hi-lume A-Series LED PowPak dimming module with Eco GRAFIK Eye QS with Eco Energi Savr Node with Eco Quantum HomeWorks QS 3-wire wallbox controls Maestro Wireless GP Panel GRAFIK Eye QS* GRAFIK Eye

integration of digital lighting loads with wireless occupancy and daylight sensors as well as wireless controls. www.lutron.

9 Lutron compatibility Lutron compatibility compatibility is based on the available control type for each driver and ballast family ontrol type Product family ompatible systems Eco digital link 3-wire Eco H-Series ballasts Hi-lume 3D Eco Eco ompact Eco H-Series LED Hi-lume A-Series LED Eco 5-Series LED Eco LED (E) Eco 5-Series LED (E) Eco 5-Series LED (PSE) Hi-lume 3D Eco Eco ompact Hi-lume Hi-lume A-Series LED PowPak dimming module with Eco GRAFIK Eye QS with Eco Energi Savr Node with Eco Quantum HomeWorks QS 3-wire wallbox controls Maestro Wireless GP Panel GRAFIK Eye QS* GRAFIK Eye 3000* GRAFIK Eye 4000 ontrol systems compatible with Eco digital link ballasts and drivers PowPak dimming module with Eco The PowPak dimming module with Eco is a load controller that allows for easy integration of digital lighting loads with wireless occupancy and daylight sensors as well as wireless controls. GRAFIK Eye QS with Eco Fully customizable, GRAFIK Eye QS with Eco adjusts lights and shades for any task or activity at the touch of a button. Using wireless technology, GRAFIK Eye QS with Eco eliminates communication wiring to shades, sensors, and wireless controls. -wire forward phase Hi-lume A-Series LED (LTE/0 V) GRAFIK 5000 /6000 /7000 LP8 Quantum RadioRA HomeWorks QS HomeWorks* Select wallbox controls Maestro Wireless GRAFIK Eye QS GRAFIK Eye 3000 GRAFIK Eye 4000 GRAFIK 5000/6000/7000 LP8 Quantum RadioRA HomeWorks QS HomeWorks Energi Savr NodeTM with Eco Energi Savr Node with Eco allows for easy integration of occupancy sensors, daylight sensors, and Eco-compatible digital drivers and ballasts. It communicates with wireless devices through the QS sensor module to minimize wiring for easy installation. Quantum Total Light Management Quantum manages both electric light and daylight to not only save energy and simplify operations, but also to improve the comfort and productivity of the people in a building. It also monitors and reports on all the lighting usage in a building for optimal energy performance and productivity while minimizing maintenance and operating costs. HomeWorks QS HomeWorks QS is designed for residential applications, integrating control of all light. The system also integrates with third-party equipment to provide control of HVA and A/V systems. *Interface required for compatibility. 4 Lutron Lutron 5

10 Drivers and s Quick reference guide Drivers and s Quick reference guide All Lutron LED drivers and fluorescent dimming ballasts are 00% performance-tested at the factory and come with a 5-year limited warranty with Lutron field service commissioning (3-year standard warranty) from date of purchase. Lutron Quality s are registered to ISO Dimming fluorescent lighting instead of repeated switching helps maintain lamp life and also saves energy. LED drivers NEW! Eco H-Series digital LED drivers Eco digital control pg. 30 Eco 5-Series digital LED drivers Eco digital control pg. 36 E MODELS ONLY Fluorescent ballasts Eco H-Series digital ballasts Eco and DALI digital control pg. 4 E, INMETRO, and S-MARK MODELS AVAILABLE LED and fluorescent lighting is used widely in educational, institutional and commercial buildings. This lighting meets energy-conscious design criteria such as ASHRAE/ IESNA 90. standards and LEED guidelines. LED and fluorescent lighting is also increasingly found in residential spaces, especially in recessed downlights and coves. The drivers and ballasts addressed in this guide are specific to each country s voltage requirements. Please confirm that the products you have selected match the required voltages by country shown on pg. 07. Hi-lume A-Series digital LED drivers Eco digital control -wire forward phase control 3-wire control pg. 30 Eco digital LED drivers Eco digital control pg. 3 E MODELS ONLY Eco 5-Series digital LED drivers Eco digital control pg. 34 Hi-lume A-Series digital LED drivers -wire forward phase control pg. 38 PSE MODELS ONLY Eco 5-Series digital LED drivers Eco digital control pg. 40 PSE MODELS ONLY Hi-lume 3D digital ballasts Eco digital control 3-wire control pg. 44 Eco digital ballasts Eco digital control 3-wire control pg. 46 Eco compact digital ballasts for compact fluorescent lamps (FLs) Eco digital control 3-wire control pg. 48 For additional information on LEDs, please visit For additional information on ballasts, please visit 6 Lutron Lutron 7

11 Drivers and s Quick reference guide Drivers and s Quick reference guide Lutron fluorescent dimming ballast and LED driver global offering E Eco Eco 5-Series Eco H-Series UL/SA Hi-lume A-Series Eco 5-Series Eco H-Series Eco H-Series Eco Hi-lume 3D UL/SA or E Hi-lume A-Series Eco Eco 5-Series Eco H-Series* PSE Hi-lume A-Series Eco 5-Series Key LED driver Fluorescent ballast * certifications vary by region. Additional ballast certifications may be required. 8 Lutron Lutron 9

12 Drivers and s Quick reference guide Drivers and s Quick reference guide LED drivers Family ompatible Lamp Types and Wattages Voltage ontrol Options Available Types (pg. 4) LED drivers Eco H-Series LED drivers pg. 30 UL models LED light engines, up to 75 W UNV: /60 Hz Eco digital link K-case M-case Low-end dimming level %, fade to/from black Hi-lume A-Series LED drivers pg. 30 UL and SA models LED light engines, up to 53 W UNV: 0 V, 0/40 V, 77 50/60 Hz 0 50/60 Hz Eco digital link 3-wire control -wire forward phase control (neutral required) K-case KL-case M-case % Eco LED drivers pg. 3 E model LED light engines, up to 5 W 0 40 V 50/60 Hz Eco digital link % P-case Eco 5-Series LED drivers pg. 34 UL and SA models LED light engines, up to 75 W UNV: 0 V, 0/40 V, 77 50/60 Hz Eco digital link 5% K-case M-case Eco 5-Series LED drivers pg. 36 E model LED light engines, up to 50 W 0 40 V 50/60 Hz Eco digital link 5% R-case M-case Hi-lume A-Series LED drivers pg. 38 PSE model LED light engines, up to 3 W 00 V 50/60 Hz -wire forward phase control (neutral required) K-case % Eco 5-Series LED drivers pg. 40 PSE model LED light engines, up to 35 W 00/00 V 50/60 Hz Eco digital link 5% T-case 0 Lutron Lutron

Drivers and s Quick reference guide Drivers and s Quick reference guide Fluorescent ballasts Family ompatible Lamp Types and Wattages Voltage ontrol Options Available Types (pg.

13 Drivers and s Quick reference guide Drivers and s Quick reference guide Fluorescent ballasts Family ompatible Lamp Types and Wattages Voltage ontrol Options Available Types (pg. 4) Fluorescent ballasts Eco H-Series ballasts pg. 4 UL, NOM, and SA models T8 linear and U-bent: 7 W, 5 W, 3 W T5 HO linear: 4 W, 39 W, 54 W T5 linear: 4 W, W, 8 W H0-Series models: T8 linear reduced wattage: 8 W T5 HO linear reduced wattage: 49 W/50W/5W T5 linear reduced wattage: 3 W, 5 W/6W UNV: 0 V, 7V, 0/40 V, 77 50/60 Hz 347 V 50/60 Hz Eco digital link M-case -case G-case Low-end dimming level % or lower for T8 % for T5 and T5 HO 0% for T8, T5, and T5 HO reduced wattage* Eco H-Series ballasts pg. 4 E, INMETRO,, and S-mark models T8 linear: 3 W T5 HO linear: 4 W, 39 W, 54 W T5 linear: 4 W, W, 8 W H0-Series models (INMETRO only): T5 HO linear reduced wattage: 49W/50W/5W T5 linear reduced wattage: 3 W, 5 W/6W NOTE: For model availability, please refer to page V 50/60 Hz 7 50/60 Hz /60 Hz 0 40 V 50/60 Hz Eco digital link DALI digital link (E models only) M-case % 0% for T8, T5, and T5 HO reduced wattage* Hi-lume 3D ballasts pg. 44 UL, NOM, and SA models T8 linear and U-bent: 7 W, 5 W, 3 W, 40 W T5 HO linear: 4 W, 39 W, 54 W T5 linear: 4 W, W, 8 W T5 twin-tube: 36 W, 40 W, 50 W UNV: 0 V, 0/40 V, 77 50/60 Hz Eco digital link 3-wire control -case G-case % or lower for T8 % for T5 and T5 HO 5% for T5 twin-tube Eco ballasts pg. 46 UL, NOM, and SA models T8 linear and U-bent: 7 W, 5 W 3 W T8 linear reduced wattage: 8 W T5 HO linear: 4 W, 39 W, 54 W T5 linear: 4 W, W, 8 W, 35 W T5 twin-tube: 36 W, 39 W, 40 W, 50 W, 55 W T5 twin-tube reduced wattage: 5 W UNV: 0 V, 0/40 V, 77 50/60 Hz Eco digital link 3-wire control Integral sensor connections for lowvoltage wallbox controls, occupancy and daylight sensors J-case G-case 0% Eco compact ballasts pg. 48 UL and SA models T4 4-pin quad-tube FL: 8 W, 6 W T4 4-pin triple-tube FL: 6 W, 3 W, 4 W UNV: 0 V, 0/40 V, 77 50/60 Hz Eco digital link 3-wire control K-case 5% * H0-Series is a 0% low-end dimming solution for selected reduced wattage lamps; Lutron does not suggest mixing of different percentage ballasts in the same fixture/areas, as the difference in low end can cause an unsatisfactory look to the lighting in the space. Lutron Lutron 3

14 Drivers and s Quick reference guide Drivers and s Quick reference guide dimensions dimensions - or J-case B G-case F Note: Dotted area for sensor attachment applies to Eco J-case only. B A A G D E D E A B D E F G A B D E 6. in (409 mm).00 in (5 mm).8 in (30 mm) 8.00 in (457 mm) 7.70 in (450 mm) (mounting centers) 6.8 in (73 mm) (J only) in (0 mm) (J only) 7.3 in (8 mm).00 in (5 mm).38 in (60 mm) 9.50 in (4 mm) 8.9 in (6 mm) (slot mounting centers) K-case (LED Driver) Non-studded: Studded: G F B H U A I V S J T E D 8 3 Threaded stud 0.9 in (7.37 mm) long A 4.0 in (07 mm) B.00 in (5 mm) 3.00 in (76 mm) D 4.90 in (4 mm) E 4.60 in (7 mm) (mounting centers) F.4 in (36 mm) G.99 in (5 mm) For studded models only: H.09 in (8 mm) I.00 in (5 mm) J.60 in (4 mm) For non-studded models only: S.38 in (35 mm) T 0.64 in (6 mm) U 0.88 in ( mm) V.53 in (39 mm) Lamp wires are 36 in (0.90 m) for leaded models Power and control wires are 8 in (0.45 m) for leaded models If using 4-hole mount, mounting centers are 8.9 in (6 mm) x.70 in (43 mm). K-case () Non-studded: F G B A E D A B D E F G 4.0 in (07 mm).00 in (5 mm) 3.00 in (76 mm) 4.90 in (4 mm) 4.60 in (7 mm) (mounting centers).4 in (36 mm).99 in (5 mm) Studded: H A I J For studded models only: H.09 in (8 mm) I.00 in (5 mm) J.60 in (4 mm) For information on discontinued ballast case dimensions see pg 05) F G B E D 8 3 Threaded stud 0.9 in (7.37 mm) long For information on discontinued ballast case dimensions see pg 05) 4 Lutron Lutron 5

15 Drivers and s Quick reference guide Drivers and s Quick reference guide dimensions dimensions KL-case 4.89 (4).6 (66) A B D E 4.89 in (4 mm) 4.00 in (0 mm).6 in (66 mm) 4.00 in (0 mm).6 in (4 mm) P-case A B A.5 in (3 mm) B 3.54 in (90 mm) 6.09 in (55 mm) D 5.30 in (35mm) E 0.54 in (4 mm) F 0.7 in (7 mm) G.99 in (76 mm) Mounting centers.6 (4) 4.00 (0) G 4.00 (0) F E M-case D A B D 4.3 in (359 mm) 3.78 in (350 mm) (mounting centers).8 in (30 mm) 0.98 in (5 mm) B A D For information on discontinued ballast case dimensions see pg 05) For information on discontinued ballast case dimensions see pg 05) 6 Lutron Lutron 7

16 Drivers and s Quick reference guide Drivers and s Quick reference guide dimensions dimensions R-case A. in (54 mm) B 8.46 in (5 mm). in (3 mm) D.36 in (60 mm) E.06 in (7 mm) F 8.9 in (08 mm) T-case A.8 in (58 mm) B 9.66 in (45 mm).5 in (39 mm) D 0.35 in (9 mm) E.36 in (60 mm) F.4 in (9 mm) G 9.5 in (35 mm) B B A A D D E F G E F For information on discontinued ballast case dimensions see pg 05) For information on discontinued ballast case dimensions see pg 05) 8 Lutron Lutron 9

Drivers and s Eco H-Series LED drivers Drivers and s Eco H-Series LED drivers Highest performance dimming to %, with fade to/from black UL and cul Models Features Fades smoothly between 0% and % when

17 Drivers and s Eco H-Series LED drivers Drivers and s Eco H-Series LED drivers Highest performance dimming to %, with fade to/from black UL and cul Models Features Fades smoothly between 0% and % when turned on and off Environment Sound rating: lass A (inaudible in a 4 db ambient environment) Maximum case temperature is 67º F (75º ) ontinuous, flicker-free dimming from 00% to % Shown: Eco H-Series LED driver, K-case and M-case Model number is determined by load and control type. See pg. 57 for additional information. Eco H-Series LED drivers provide a high-performance solution for any space, in any application. They provide smooth, continuous dimming down to % of output current, and fade smoothly between 0% and % when turned on and off. Operating Voltage Universal input ( /60 Hz) ontrol options Eco digital link Lamp types and wattages Most LED modules, up to 75 W Available case types K-case (compact) M-case (linear) LED operating specifications onstant urrent 0. A.40 A (in 0 ma steps) from 8 40 W (K-case) 500 ma. A (in 0 ma steps) from 5 75 W (M-case) onstant current reduction (R) dimming Key standards UL 8750 Recognized F Part 5 compliant for commercial applications at 0 V and 77 V Meets ANSI 6.4 category A surge protection standards up to and including 4 kv lass output K-case type meets LED driver requirements for Energy Star version. in designated operating regions M-case type meets Power and THD requirements of DL (version 9/7/3) above 50% of maximum rated output power Type TL rated * For a complete list of compatible controls, visit Guaranteed dimming performance when used with Lutron controls ompatible with Energi Savr NodeTM units with Eco, GRAFIK Eye QS with Eco, PowPak dimming module with Eco, and Quantum systems, allowing for integration into a planned or existing Eco lighting control solution Protected from miswires of input power to Eco control inputs up to 77 V~ Rated lifetime of 50,000 hours at 75 calibration point (tc) UL Type TL Rated F Part 5 compliant for commercial applications at 0 77 V~ 00% performance tested at factory RoHS compliant. Non-volatile memory restores all settings after power failure. Instant light output at any level when turned on, without flashing to full on. Meets NEMA 40 in-rush current limits Specifications 00% end-of-line performance-tested Typical standby power consumption: 0. W at 0 V ~ and 0.3 W at 77 V ~ Power (PF): > 0.9 at maximum power Dimming Method: onstant-current reduction dimming provides video-conference friendly dimming PWM dimming below 5% (40 Hz) for maximum compatibility with light engines at low light levels Light output at % depends on the efficacy of the light engine used with the driver. Mounting K-case typically mounts via studs or tabs in an LED fixture or junction box ( no studs case option available) M-case driver typically mounts in a linear or troffer fixture type (downlight, cove light, sconce, undercabinet, etc.) Wiring Eco digital link: Requires four wires (E, E, onstant Hot/Live, and Neutral) plus ground in some models; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal; E/E wires may also be run lass The 6 AWG control wire must not exceed 900 ft (74 m) and the 8 AWG control wire must not exceed 550 ft (67 m) Maximum driver-to-led light engine wire length up to 00 ft (30 m); see specification submittal for model and wiring limitations For control wiring diagrams, see pg. 9, and for load wiring diagrams, see pg. Driver is grounded by a mounting screw to the grounded fixture (or by terminal connection on the K-case) 30 Lutron Lutron 3

Drivers and s Hi-lume A-Series LED drivers Drivers and s Hi-lume A-Series LED drivers Highest performance dimming to % Eco digital link, 3-wire or -wire forward phase controlled Shown: Hi-lume

18 Drivers and s Hi-lume A-Series LED drivers Drivers and s Hi-lume A-Series LED drivers Highest performance dimming to % Eco digital link, 3-wire or -wire forward phase controlled Shown: Hi-lume A-Series LED driver, K-case Model number is determined by load and control type. See pg. 53 for additional information. Hi-lume A-Series is a high-performance LED driver that provides smooth, continuous % dimming for virtually any LED fixture, whether it requires constant current or constant voltage. It is the world s most versatile LED driver family offered today due to the wide variety of compatible LED arrays, multiple form factors, and numerous control options. Operating Voltage Universal input (0 V, 0/40 V and 77 50/60 Hz) 0 V only for -wire forward phase models ontrol options Eco digital link (L3D family) 3-wire control (L3D family) -wire forward phase control* (LTE/0 V family/0 V) Lamp types and wattages Most LED modules, up to 53 W Available case types K-case (compact) M-case (linear) KL-case (UL Listed for US and anada) Junction box For system compatibility information, see pg. 4. UL and cul MODELS LED operating specifications onstant urrent 00 ma. A (in 0 ma steps) from 5 40 W 70 ma to.05 A (in 0 ma steps) from W Pulse width modulation (PWM) or constant current reduction (R) dimming output to LED onstant Voltage 0 V 38 V (in 0.5 V steps) lass 38.5 V 60 V (in 0.5 V steps) isolated non-lass 5 W 40 W Pulse width modulation (PWM) dimming output to LED QwikFigTM K-case & M-case L3D models K-case & M-case LTE/0 V models (coming soon) * For a complete list of compatible controls, visit Key standards UL and cul Listed (5 40 W) models available for remote installation outside of an appropriate fixture UL 8750 Recognized L3D models F Part 5 compliant for commercial applications at 0 V and 77 V LTE models F Part 5 compliant for residential and commercial applications at 0 V Meets ANSI 6.4 category A surge protection standards up to and including 4 kv Models available to meet LED Driver requirements for Energy Star. Features ontinuous, flicker-free dimming from 00% to % Efficiency greater than 80% at 40 W A rated lifetime of 50,000 hours at maximum case temperature Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control Standard 3-wire line-voltage phase-control technology for guaranteed dimming performance with all Lutron 3-wire fluorescent dimmers -wire forward phase control technology provides compatibility with select wallbox controls onstant current reduction (R) and pulse width modulation (PWM) dimming available for constant current light engines; constant voltage light engines operate with pulse width modulation (PWM) dimming only. Protected from miswires of input power to Eco control inputs Non-volatile memory restores all driver settings after power failure Instant light output at any level when turned on, without flashing to full on Specifications 00% end-of-line performance-tested Power factor greater than 0.90 at 40 W Inrush current less than A Environment Sound rating: lass A (inaudible in a 7 db ambient environment) Maximum case temperature is 65º (49º F) Mounting K-case driver typically mounts via studs or tabs in an LED fixture or junction box ( no studs case option available) M-case driver typically mounts in a linear or troffer fixture type (downlight, cove light, sconce, under cabinet, etc.) UL and cul Listed models are available with the KL-case enclosure Wiring Eco digital link: Require four wires (E, E, onstant Hot/Live, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal, E/E wires may also be run lass 3-wire: Requires three wires (Dimmed Hot, Switched Hot, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal -wire forward phase: Requires two wires plus Ground (Dimmed Hot and Neutral); one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal The 6 AWG control wire must not exceed 900 ft (74 m) and the 8 AWG control wire must not exceed 550 ft (67 m) Maximum driver-to-led light engine wire length up to 00 ft (30 m). See specification submittal for model and wiring limitations Driver is grounded by a mounting screw to the grounded fixture (or by terminal connection on the K-case) UL and cul Listed driver is grounded by wire connection on the KL-case or by ground lug terminal in the junction box; all wire connections must be made in the junction box to maintain listing For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg. 0 3 Lutron Lutron 33

Drivers and s Eco LED drivers (E) Drivers and s Eco LED drivers (E) Highest performance dimming to % Eco and DALI digital link controlled E MODELS ONLY Key standards E compliant and ENE ertified RoHS

19 Drivers and s Eco LED drivers (E) Drivers and s Eco LED drivers (E) Highest performance dimming to % Eco and DALI digital link controlled E MODELS ONLY Key standards E compliant and ENE ertified RoHS 006 ompliant Specifications 00% end-of-line performance-tested Power factor greater than 0.95 at 5 W IE Rated Low harmonic distortion Shown above: Eco LED driver, P-case Model number is determined by load. See pg. 56 for additional information. Providing smooth and continuous % dimming, the high-performance Eco LED driver works with virtually any LED fixture. It communicates via the Eco digital link, a revolutionary technology that allows the driver to react to its environment. It also allows for individual control of the drivers, which eliminates the need to rewire, and provides a scalable solution for almost any application. The Eco LED driver is available for fixtures requiring either constant current or constant voltage. Operating voltage 0 40 V 50/60 Hz ontrol options Eco digital link Lamp types and wattages Most LED modules, up to 5 W Available case types P-case LED operating specifications onstant urrent 0.0 A.05 A (in 0.0 A increments) 5 W 5 W Pulse width modulation (PWM) or constant current reduction (R) dimming onstant Voltage 8 V 40 V (in 0.5 V increments) 5 W 5 W Pulse width modulation (PWM) dimming Features ontinuous, flicker-free dimming from 00% to % Efficiency of 80% at 5 W A rated lifetime of 50,000 hours at maximum case temperature Guaranteed dimming performance when used with Lutron controls Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control onstant current reduction (R) and pulse width modulation (PWM) dimming available for constant current light engines; constant voltage light engines operate with pulse width modulation (PWM) dimming only Protected from miswires of input power to Eco control inputs Non-volatile memory restores all driver settings after power failure Instant light output at any level when turned on, without flashing to full on Inrush current less than A Mounting Independent control gear; driver requires no particular mounting means Wiring Requires four wires (E, E, onstant Hot/Live, and Neutral); one or two 0.50 mm to.50 mm ore lass wire per terminal; E/E wires may also be run lass The.50 mm control wire must not exceed,07 ft (30 m), and the 0.50 mm must not exceed 337 ft (03 m); maximum driver-to-led light engine wire length is 6.56 ft ( m) for any output type For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg. 0 For system compatibility information, see pg Lutron Lutron 35

Drivers and s Eco 5-Series LED drivers Drivers and s Eco 5-Series LED drivers High performance dimming to 5% Eco digital link controlled Shown above: Eco 5-Series LED driver, K-case and M-case Model

20 Drivers and s Eco 5-Series LED drivers Drivers and s Eco 5-Series LED drivers High performance dimming to 5% Eco digital link controlled Shown above: Eco 5-Series LED driver, K-case and M-case Model number is determined by load. See pg. 57 for additional information. The Eco 5-Series LED driver is built on the Eco platform, which guarantees dimming performance with Lutron control systems and provides an affordable solution for smooth, flickerfree dimming from 00% to 5%. The driver complements our global offering of industry leading, architectural % Hi-lume A-Series LED drivers. Operating voltage Universal input (0 V, 0 40 V, and 77 50/60 Hz) ontrol options Eco digital link Lamp types and wattages Most common LED modules, up to 75 W Available case types K-case M-case UL and cul MODELS LED operating specifications onstant urrent 350 ma.4 A (in 0 ma steps) from 5-35 W 500 ma. A (in 0 ma steps) from W onstant current reduction (R) dimming Key standards With UL Recognition F Part 5 compliant for commercial applications at 0 V and 77 V Meets ANSI 6.4 category A surge protection standards up to and including 4 kv lass Output M-case type meets Power and THD requirements of DL (version 9/7/3) above 50% of maximum rated output power Features ontinuous, flicker-free dimming from 00% to 5% Efficiency of greater than 85% at 35 W (K-case); Efficiency of greater than 85% at 75 W (M-case) Guaranteed dimming performance when used with Lutron controls A rated lifetime of 50,000 hours at maximum case temperature Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control onstant current reduction (R) dimming for constant current engines Non-volatile memory restores all driver settings after power failure Protected from miswire of input power to Eco control inputs Instant light output at any level when turned on, without flashing to full on Specifications 00% end-of-line performance-tested Power factor greater than 0.95 at maximum output Typical stand-by power consumption of 0.0 W at 0 V and 0.30 W at 77 V Turn-on time of less than 00 ms typical from electronic off Environment Sound rating: lass A (inaudible in a 7 db ambient environment) Maximum case temperature is 67º F (75º ) Mounting K-case typically mounts via studs or tabs in an LED fixture or junction box ("no studs" case option available) M-case driver typically mounts in a linear or troffer fixture type (downlight, cove light, sconce, undercabinet, etc.) Wiring Eco digital link: Requires four wires (E, E, onstant Hot/Live, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal; E/E wires may also be run lass The 6 AWG control wire must not exceed 900 ft (74 m) and the 8 AWG control wire must not exceed 550 ft (67 m) Maximum driver-to-led light engine wire length up to00 ft (30 m); see specification submittal for model and wiring limitations For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg. 0 Driver is grounded by a mounting screw to the grounded fixture (or by terminal connection on the K-case) 36 Lutron Lutron 37

Drivers and s Eco 5-Series LED drivers (E) Drivers and s Eco 5-Series LED drivers (E) High performance dimming to 5% Eco and DALI digital link controlled Shown above: Eco 5-Series LED driver (E),

The Eco 5-Series LED driver is built on the Eco platform, which guarantees dimming performance with Lutron control systems and provides an affordable solution for smooth, flickerfree dimming from 00%

21 Drivers and s Eco 5-Series LED drivers (E) Drivers and s Eco 5-Series LED drivers (E) High performance dimming to 5% Eco and DALI digital link controlled Shown above: Eco 5-Series LED driver (E), R-case and M-case Model number is determined by load. See pg. 58 for additional information. The Eco 5-Series LED driver is built on the Eco platform, which guarantees dimming performance with Lutron control systems and provides an affordable solution for smooth, flickerfree dimming from 00% to 5%. The driver complements our global offering of industry leading, architectural % Eco LED drivers. Operating voltage 0 40 V 50/60 Hz ontrol options Eco digital control DALI digital control Lamp types and wattages Most common LED modules, up to 50 W Available case types R-case M-case E MODELS ONLY LED operating specifications onstant urrent 50 ma, 0.35 A, 0.50 A, 0.70 A,.05 A,.40 A from 5-35 W 070 = 0.70 A; 07 = 0.7 A; 33 =.33 A from W onstant current reduction (R) dimming Key standards E ompliant and ENE ertified ROHS 006 ompliant IE Rated DALI ompliant Features ontinuous, flicker-free dimming from 00% to 5% Efficiency of greater than 85% at 35 W (K-case); Efficiency of greater than 85% at 75 W (M-case) A rated lifetime of 50,000 hours at maximum case temperature Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control onstant current reduction (R) dimming available for constant current engines Guaranteed dimming performance when used with Lutron controls Protected from miswire of input power to Eco control inputs Non-volatile memory restores all driver settings after power failure Instant light output at any level when turned on, without flashing to full on Specifications 00% end-of-line performance-tested Power factor greater than 0.95 at maximum output Typical stand-by power consumption of 0.30 W Turn-on time of less than 00 ms typical from electronic off Environment Operating ambient temperature range: 0º to 50º (3º F to º F) Provide adequate space to ensure convective cooling of LED driver Mounting Independent control gear; driver requires no particular mounting means Driver can be independently mounted Will fit through.36 in (60 mm) ceiling cutout M-case driver typically mounts in a linear or troffer fixture type (downlight, cove light, sconce, undercabinet, etc.) Wiring Requires four wires (E, E, onstant Hot/Live, and Neutral); two 0.75 mm to.50 mm (or one.75 mm to.50 mm ) solid copper lass or lass wire per digital link terminal, and two 0.75 mm to.50 mm solid copper lass wire power terminal Maximum driver-to-led light engine wire length must not exceed 49. ft (5 m) The 0.75 mm control wire must not exceed 49 ft (50 m), and the.50 mm control wire must not exceed 984 ft (300 m) For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg Lutron Lutron 39

Drivers and s Hi-lume A-Series LED drivers (PSE) Drivers and s Hi-lume A-Series LED drivers (PSE) Highest performance dimming to % -wire forward phase controlled PSE MODELS ONLY Key standards PSE

22 Drivers and s Hi-lume A-Series LED drivers (PSE) Drivers and s Hi-lume A-Series LED drivers (PSE) Highest performance dimming to % -wire forward phase controlled PSE MODELS ONLY Key standards PSE certified Meets IEEE 6.4 category A surge protection standards up to and including 4kV Environment Sound rating: lass A (inaudible in 7 db ambient environement) Maximum case temperature is 65º (49º F) Shown: Hi-lume A-Series LED driver (PSE), K-case Model number is determined by load and control type. See pg. 55 for additional information. Hi-lume A-Series (PSE) is a high performance LED driver that provides smooth, continuous % dimming for constant current LED modules. Features ontinuous, flicker-free dimming from 00% to % A rated lifetime of 50,000 hours at maximum case temperature onstant current reduction (R) and pulse width modulation (PWM) dimming available for constant current light engines Standard -wire line-voltage forward phase control technology Non-volatile memory restores all driver settings after power failure Instant light output at any level when turned on, without flashing to full on Specifications 00% end-of-line performance-tested Power factor greater than 0.90 Mounting Typically mounts via studs or tabs in an LED fixture or junction box ( no studs case option available) Wiring Requires two wires (Dimmed Hot and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal Maximum driver-to-led light engine wire length is 9.8 ft (3 m) Driver is grounded by a mounting screw to the grounded fixture or by terminal connection For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg. 0 Operating Voltage 00 50/60 Hz ontrol options -wire forward phase control* Lamp types and wattages Most common LED modules, up to 3 W onstant urrent 00 ma.50 A (in 0 ma steps) 3 W 3 W Pulse width modulation (PWM) or constant current reduction (R) dimming Inrush current less than A Available case types K-case LED operating specifications For system compatibility information, see pg. 4. * For a complete list of compatible controls, visit 40 Lutron Lutron 4

Drivers and s Eco 5-Series LED drivers (PSE) Drivers and s Eco 5-Series LED drivers (PSE) High performance dimming to 5% Eco digital link controlled Shown above: Eco 5-Series LED driver (PSE), T-case

23 Drivers and s Eco 5-Series LED drivers (PSE) Drivers and s Eco 5-Series LED drivers (PSE) High performance dimming to 5% Eco digital link controlled Shown above: Eco 5-Series LED driver (PSE), T-case Model number is determined by load. See pg. 58 for additional information. Operating voltage 00/00 50/60 Hz ontrol options Eco digital link PSE MODELS ONLY The Eco 5-Series LED driver is built on the Eco platform, which guarantees dimming performance with Lutron control systems and provides an affordable solution for smooth, flickerfree dimming from 00% to 5%. The driver complements our global offering of industry leading, architectural % Eco LED drivers. LED operating specifications onstant urrent 0.35 A, 0.50 A, 0.70 A,.05 A,.40 A Up to 35 W onstant current reduction (R) dimming Features ontinuous, flicker-free dimming from 00% to 5% Efficiency greater than 85% at 35 W Guaranteed dimming performance when used with Lutron controls A rated lifetime of 50,000 hours at maximum case temperature Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control onstant current reduction (R) dimming available for constant current light engines Protected from miswire of input power to Eco control inputs Non-volatile memory restores all driver settings after power failure Instant light output at any level when turned on, without flashing to full on Specifications 00% end-of-line performance-tested Power factor greater than 0.95 at maximum power Typical stand-by power consumption of 0.50 W Turn-on time of less than 00 ms typical from electronic off Environment Sound rating: lass A (inaudible in a 4 db ambient environment) Operating ambient temperature range: 0º to 40º (3º F to 04º F) Mounting Independent control gear; driver requires no particular mounting means Driver can be independently mounted Will fit through.36 in (60 mm) ceiling cutout Wiring Requires four wires (E, E, onstant Hot/Live, and Neutral): one 0.80 mm to.0 mm solid or stranded copper lass or lass wire per digital link terminal, and one.60 mm to.00 mm solid copper lass wire per power terminal Maximum driver-to-led light engine wire length is 49.0 ft (5 m) The.00 mm control wire must not exceed 49 ft (50 m), and the.75 mm control wire must not exceed,640 ft (500 m) For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg. 0 Lamp types and wattages Most common LED modules, up to 35 W Key standards PSE certified Available case types T-case 4 Lutron Lutron 43

24 Drivers and s Eco H-Series ballasts Drivers and s Eco H-Series ballasts Highest performance dimming to % at a low cost Eco digital link controlled Shown above: Eco H-Series, M-case Model numbers are organized by lamp type. See pg. 6 for additional information. Eco H-Series digitally addressable ballasts offer a low-cost, flexible solution for any space in an application. Providing industry-leading dimming to % or less, they meet the needs of the most demanding applications. The Eco digital link also provides individual control, which eliminates the need to rewire, reduces design time, and provides a scalable solution for a small area to an entire building. Operating voltage Universal input (0 V, 7 V, 0/40 V and 77 50/60 Hz) Hz (SA ertified only) Lamp types and wattages T8 linear and U-bent: 7 W, 5 W, 3 W T5 HO linear: 4 W, 39 W, 54 W T5 linear: 4 W, W, 8 W H0-Series reduced wattage models** T8 linear reduced wattage: 8 W T5 HO linear reduced wattage: 49 W/50 W/5 W T5 linear reduced wattage: 3 W, 5/6 W ontrol options Eco digital link DALI digital link* * DALI compliance available with E models only. ** H0-Series is a 0% low-end dimming solution for selected reduced wattage lamps; Lutron does not suggest mixing of different percentage ballasts in the same fixture/areas, as the difference in low end can cause an unsatisfactory look to the lighting in the space. Available case types G-case M-case -case (347 V only) Key standards UL Listed (evaluated to the requirements of UL 935) SA ertified (evaluated to the requirements of. No. 74) Meets F Part 8 Non-onsumer requirements for EMI/RFI emissions Select models are NOM listed alifornia Energy ommission Listed Models are also available to meet global countryspecific standards; (NOM, E, INMETRO,, and S-mark) see pg. 77 for a listing of global model numbers NEMA Premium and BAA compliant models available (see pg. 6 for additional information) For system compatibility information, see pg.4. Features ontinuous, flicker-free dimming down to 0.7% or % of full light output for T8 lamps, % for T5 and T5 HO lamps, 0% for T8, T5, and T5 HO reduced watttage lamps The Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control Protected from miswire of input power to Eco control inputs Slim profile design s maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity Lamps turn on at any dimmed level without going to full brightness Specifications 00% performance-tested, including burn-in at the factory Total Harmonic Distortion (THD): less than 0%; select models are less than 5% Power factor greater than 0.95 factor equal to.0 or.7 for T8 lamps factor equal to.0 for T5 and T5 HO lamps and E, InMetro,, and S-mark models Non-volatile memory restores all ballast settings after power failure Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 4 khz Built-in inrush current-limiting circuitry (maximum of 7 A at 0 V and 3 A at 77 V) y-tuned ballast factors available to customize the ballast for different applications (available for UL and SA models only) Environment Sound rating: lass A (inaudible in a 7 db ambient environment) Minimum lamp starting temperature 0º (50º F) Maximum ballast case temperature 80º (76º F) Mounting mounts using two screws (or sheet metal feature and one screw) within a fluorescent fixture is grounded via a mounting screw to the fixture Wiring Requires four wires (E, E, onstant Hot/Live, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal; E/E wires may also be run lass grounded via case The 6 AWG control wire must not exceed 900 ft (74 m), and the 8 AWG must not exceed 550 ft (67 m). Maximum ballast-to-lamp-socket lead length is 7 ft ( m) for T8, T5, and T5 HO linear lamps Lutron and NEMA recommend sockets complying with IE Sockets must have a UL mark as well. Use rapid start sockets, not instant start sockets. For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg Lutron Lutron 45

Drivers and s Hi-lume 3D ballasts Drivers and s Hi-lume 3D ballasts Highest performance dimming to %* Eco digital link or 3-wire controlled Shown above: Hi-lume 3D, G-case Model numbers are organized

25 Drivers and s Hi-lume 3D ballasts Drivers and s Hi-lume 3D ballasts Highest performance dimming to %* Eco digital link or 3-wire controlled Shown above: Hi-lume 3D, G-case Model numbers are organized by lamp type. See pg. 63 for additional information. Hi-lume 3D is a high-performance, energy-efficient, digitally addressable dimming ballast for demanding architectural applications. Hi-lume 3D is the world s first fluorescent dimming ballast that dims lights to % or less for T8 lamps. With Hi-lume 3D you get the highest performance fluorescent dimming with the same efficiency as non-dimmable ballasts. Operating voltage Universal input (0 V, 0/40 V, 77 50/60 Hz) Lamp types and wattages T8 linear and U-bent: 7 W, 5 W, 3 W, 40 W T5 HO linear: 4 W, 39 W, 54 W T5 linear: 4 W, W, 8 W T5 twin tube * : 36 W, 40 W, 50 W ontrol options Eco digital link 3-wire control Available case types -case G-case Key standards UL Listed (evaluated to the requirements of UL 935) SA certified (evaluated to the requirements of. No. 74, specific model numbers only) Meets F Part 8 Non-onsumer requirements for EMI/RFI emissions alifornia Energy ommission Listed Select models are NOM listed (see pg. 78 for a listing of NOM model numbers) BAA compliant models available (see pg. 63 for additional information) For system compatibility information, see pg. 4. * T5 twin-tube models dim to 5%. Features Broadest dimming range: continuous, flicker-free dimming down to 0.7% of full light output for T8 lamps; % for T5 and T5 HO lamps; and 5% for T5 twin-tube lamps Industry-leading ballast efficacy of up to 00 lumens per watt Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control Standard 3-wire line-voltage phase-control technology for consistent dimming performance and compatibility with all Lutron 3-wire fluorescent dimmers Protected from miswire of input power to Eco control inputs Slim-profile design s maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity Lamps turn on at any dimmed level without going to full brightness Specifications 00% performance-tested, including burn-in at the factory Total Harmonic Distortion (THD): less than 0% Power factor greater than.95 factor equal to.0 or.7 for T8 lamps factor equal to.0 for T5 lamps Non-volatile memory restores all ballast settings after power failure Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 4 khz Built-in inrush current-limiting circuitry (maximum of 7 A at 0 V and 3 A at 77 V) y-tuned ballast factors available to customize the ballast for different applications Environment Sound rating: lass A Minimum lamp starting temperature 0º (50º F) Maximum ballast case temperature 75º (67º F) Mounting mounts using two screws (or sheet metal feature and one screw) within a fluorescent fixture is grounded via a mounting screw to the fixture Wiring Eco digital link: Requires four wires (E, E, onstant Hot/Live, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal, E/E may also run lass 3-wire: Hi-lume 3D ballasts require three wires (Dimmed Hot, Switched Hot, and Neutral) plus Ground; one 6 8 AWG solid copper lass wire per terminal The 6 AWG control wire must not exceed 900 ft (74 m), and the 8 AWG must not exceed 550 ft (67 m). Maximum ballast-to-lamp-socket lead length is 7 ft ( m) for T8, T5, and T5 HO linear lamps, and 3 ft ( m) for T5 twin-tube lamps is grounded via case Lutron and NEMA recommend sockets complying with IE Sockets must have a UL mark as well. Use rapid start sockets, not instant start sockets. For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg Lutron Lutron 47

Drivers and s Eco ballasts Drivers and s Eco ballasts Light management performance dimming to 0% Eco digital link or 3-wire controlled Shown above: Eco ballast, G-case Model numbers are organized by

26 Drivers and s Eco ballasts Drivers and s Eco ballasts Light management performance dimming to 0% Eco digital link or 3-wire controlled Shown above: Eco ballast, G-case Model numbers are organized by lamp type. See pg. 65 for additional information. Eco digitally addressable dimming ballasts employ revolutionary technology allowing each device to listen, think, decide, remember, and react to its environment. Eco fluorescent lighting control solutions are built on a simple building block architecture of fluorescent dimming ballasts, sensors, and controls, free from interfaces and power packs. Eco redefines fluorescent lighting control as easy to design, easy to install, easy to maintain, and cost effective. Operating voltage Universal input (0 V, 0/40 V, 77 50/60 Hz) Lamp types and wattages T8 linear and U-bent: 7 W, 5 W, 3 W T8 linear reduced wattage: 8 W T5 HO linear: 4 W, 39 W, 54 W T5 linear: 4 W, W, 8 W, 35 W T5 twin-tube: 36 W, 39 W, 40 W, 50 W, 55 W T5 twin-tube reduced wattage: 5 W ontrol options Eco digital link 3-wire control For system compatibility information, see pg. 4. Available case types G-case J-case Key standards UL Listed (evaluated to the requirements of UL 935) SA ertified (evaluated to the requirements of. No. 74) Meets F Part 8 Non-onsumer requirements for EMI/RFI emissions alifornia Energy ommission Listed Select models are NOM listed (see pg. 78 for a listing of NOM model numbers) NEMA Premium and BAA compliant models available (see pg. 65 for additional information) For more information on Buy America Act compliant products please visit Features ontinuous, flicker-free dimming from 00% to 0% Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual, reconfigurable fixture control Standard 3-wire line-voltage phase-control technology for consistent dimming performance and compatibility with all Lutron 3-wire fluorescent dimmers Sensors can connect directly to Eco ballasts; all sensor and wallstation wiring is lass Protected from miswire of input power to Eco control inputs Slim profile design s maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity Lamps turn on at any dimmed level without going to full brightness Specifications 00% performance-tested, including burn-in at the factory Total Harmonic Distortion (THD): less than 0% (select models are less than 5%) Power factor greater than 0.95 factor equal to 0.85 for T8 lamps factor equal to.0 for T5 and T5 HO lamps Non-volatile memory restores all ballast settings after power failure Frequency of operation ensures that ballast does not interfere with infrared devices Built-in inrush current-limiting circuitry (maximum of 7 A at 0 V and 3 A at 77 V) y-tuned ballast factors available to customize the ballast for different applications Environment Sound rating: lass A Minimum lamp starting temperature 0º (50º F) Maximum ballast case temperature 75º (67º F) Mounting mounts using two screws (or sheet metal feature and one screw) within a fluorescent fixture is grounded via a mounting screw to the fixture Wiring Eco digital link: Requires four wires (E, E, onstant Hot/Live, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal; E/E may also run lass 3-wire: Requires three wires (Dimmed Hot, Switched Hot, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal The 6 AWG control wire must not exceed 900 ft (74 m), and the 8 AWG must not exceed 550 ft (67 m). Maximum ballast-to-lamp-socket lead length is 7 ft ( m) for T8, T5, and T5 HO linear lamps, and 3 ft ( m) for T5 twin-tube lamps is grounded via case Lutron and NEMA recommend sockets complying with IE Sockets must have a UL mark as well. Use rapid start sockets, not instant start sockets. For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg Lutron Lutron 49

Drivers and s Eco compact ballasts Drivers and s Eco compact ballasts High performance dimming to 5% Eco digital link or 3-wire controlled Shown above: Eco compact ballast, K-case Model numbers are

With a 00% to 5% dimming range for T4 FL lamps, Eco compact ballasts provide both energy savings and flexibility.

27 Drivers and s Eco compact ballasts Drivers and s Eco compact ballasts High performance dimming to 5% Eco digital link or 3-wire controlled Shown above: Eco compact ballast, K-case Model numbers are organized by lamp type. See pg. 76 for additional information. Eco compact ballasts provide high-performance dimming for any compact fluorescent (FL) application, completing the Eco solution. With a 00% to 5% dimming range for T4 FL lamps, Eco compact ballasts provide both energy savings and flexibility. Operating voltage Universal input (0 V, 0/40 V, 77 50/60 Hz) Lamp types and wattages T4 4-pin quad-tube FL: 8 W, 6 W T4 4-pin triple-tube FL: 6 W, 3 W, 4 W Key standards UL Listed (evaluated to the requirements of UL 935) UL Type Outdoor for damp locations SA ertified (evaluated to the requirements of. No. 74) Meets F Part 8 Non-onsumer requirements for EMI/RFI emissions Select models are NOM listed (see pg. 78 for a listing of NOM model numbers) BAA compliant models available (see pg. 76 for additional information) For system compatibility information, see pg. 4. ontrol options Eco digital link 3-wire control Available case type K-case Quick comparison Feature Eco ompact Dimming Level 5% 0% Integral sensor connection Maximum number of lamps per ballast Maximum ballast to lamp socket lead length No 3 Eco pg. 46 Yes 3 ft ( m) 7 ft ( m) Features ontinuous, flicker-free dimming from 00% to 5% for T4 FL lamps Eco digital link allows for rezoning without rewiring, and can be wired as lass or lass perfect for retrofit and new construction Low-voltage, -conductor Eco digital link provides individual fixture control Standard 3-wire line-voltage phase control technology for consistent dimming performance and compatibility with all Lutron 3-wire fluorescent dimmers Sensors can t connect directly to Eco compact ballasts Protected from miswire of input power to Eco control inputs One model can control both 6 W and 3 W T4 lamps Low standby power (<W) when lamps are off s maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity Lamps turn on at any dimmed level without going to full brightness Specifications 00% performance-tested, including burn-in at the factory Total Harmonic Distortion (THD): less than 0% Power factor greater than 0.95 factor equal to 0.95 for T4 lamps Non-volatile memory restores all ballast settings after power failure Frequency of operation ensures that ballast does not interfere with infrared devices Built-in inrush current-limiting circuitry (maximum of 7 A at 0 V and 3 A at 77 V) y-tuned ballast factors available to customize the ballast for different applications Environment Sound rating: lass A Minimum lamp starting temperature 0º (50º F) Maximum ballast case temperature 75º (67º F) Mounting mounts using two mounting tabs or studs within a fluorescent fixture ( no studs case option available) is grounded via a mounting screw to the fixture Wiring Eco digital link: Requires four wires (E, E, onstant Hot/Live, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal, E/E may also run lass 3-wire: Requires three wires (Dimmed Hot, Switched Hot, and Neutral) plus Ground; one 6 8 AWG (0.75 mm to.50 mm ) solid copper lass wire per terminal The 6 AWG control wire must not exceed 900 ft (74 m), and the 8 AWG must not exceed 550 ft (67 m). Maximum ballast-to-lamp-socket lead length is 3 ft ( m) for T4 compact lamps is grounded via case Lutron and NEMA recommend sockets complying with IE Sockets must have a UL mark as well. Use rapid start sockets, not instant start sockets. For control wiring diagrams, see pg. 9, and for lamp wiring diagrams, see pg Lutron Lutron 5

28 Drivers and s LED driver model numbers Drivers and s LED driver model numbers Details for building a Lutron LED driver model number Details for building a Lutron LED driver model number hoosing a control type input to the LED driver The following control technologies refer to the signal and wiring between the control on the wall and the LED driver. The compatibility of a dimmer with a particular LED driver in the fixture begins with making sure they both use the same control method. These control technologies are used in standalone applications and control systems as well as in wired and wireless lighting controls. ontrol selection is typically driven by the requirements of the project. hoosing an LED driver output to the LED array/module/engine Lutron LED drivers offer models for both constant current and constant voltage applications. These two types of drivers are not interchangeable. The driver s output is determined by the design of the fixture s LED array, and must be selected by the fixture manufacturer. ontrol type Features Ideal applications Typical applications Details -wire forward phase control (Dimmed Hot & Neutral ) + Ground Eco digital link control ( Power-onstant Hot & Neutral plus LV data - E & E) + Ground Typically used for incandescent and MLV light sources General control used for LED retrofit screw-base lamps Most common method of dimming control 00 V and 0 V Digitally addressable and allows LED drivers to communicate and react to environmental changes Allows for rezoning without rewiring, and all links are miswire protected Offers significant advantages over DALI digital systems in control zones, sensor options, and more. 00/00 V, 0 V, 0 40 V, and 77 V Retrofit projects Residential and commercial system applications Projects requiring digital control for individual fixture addressability Upgrade from analog 0 0 V control Multi-zone applications Small, retrofit applications using Lutron Energi TriPak solution onstant current onstant voltage Down-light trotter, linear, pendant or sconce ove, under-cabinet light, or an area with a variable number of fixtures One light source per driver (much like a fluorescent lamp with its associated ballast) For a pre-made LED array designed to operate at or below a set current level For one or more LED arrays connected in parallel Similar to electronic or magnetic low-voltage power supplies that often have V and 4 V outputs The Lutron Hi-lume A-Series LED driver family and the Eco H-Series and 5-Series LED driver family can be configured for the specific needs of most LED sources (Xicato, GE, Philips, Bridgelux, itizen, ree, Osram and many more) and allows an LED fixture manufacturer to design for light output, power consumption, and/or efficiency. 3-wire control (Dimmed Hot, Switched Hot & Neutral) + Ground Requires a third line voltage control wire, resulting in more precise performance and less electrical noise Stable over long wire runs Easily wired 0 V and 77 V LED dimming applications requiring precise control Easy to retrofit on existing 3-Wire control systems For more information, please use the following resources: LED Driver Selection Tool ( Lutron LED ontrol enter of Excellence (.877.DIM.LED8 or LEDs@lutron.com) For more information, please use the following resources: LED Driver Selection Tool ( Lutron LED ontrol enter of Excellence (.877.DIM.LED8 or LEDs@lutron.com) 5 Lutron Lutron 53

29 Drivers and s LED driver model numbers Drivers and s LED driver model numbers Details for building a Lutron LED driver model number Hi-lume A-Series LED Drivers with UL Recognition (% dimming) Dimming to % ompatible with full range of Lutron controls Energy saving QuikFigTM configurable models available hoosing an LED dimming method There are two mechanisms for dimming constant current LED drivers: pulse width modulation (PWM) and constant current reduction (R). onstant voltage LED drivers always use PWM. In a PWM driver, the current is switched at a high frequency between zero and the rated output current. The ratio of on time to off time determines the perceived light level. In a R supply, the current flows continuously at a fixed, pre-determined amount to achieve a given light level, efficiency, or color. Wattage Output Range Model Number ontrol Type Type Leads Voltage UL/SA Recognized ertification 5 40 W See below L3D A4UU - _ 3-wire, Eco KS, KN, M N UNV = W See pg. 5 L3D A5UU - _ 3-wire, Eco KS, KN N UNV = W See below LTE A4UU - _ -wire, Fwd Phase KS, KN, M N 0 only UL Listed ertification (NEW) See below L3D A4UUKL- _ 3-wire, Eco KL Y UNV = W See below LTE A4UUKL- _ -wire, Fwd Phase KL Y 0 only How to build a model number: Hi-lume A-Series (5 40 W) LED driver with UL and cul recognition, and UL and cul listing (see Rated LED urrent Driver Output urrent 0 PWM Power Supply Time Driver output Suitable applications Pulse width modulation (PWM) onstant current reduction (R) Rated LED urrent Driver Output urrent Selected 0 R Power Supply Time Fixtures that must be dimmed very low and still maintain consistent color olor mixing applications that require precise levels for each color Applications where digital video cameras are in use. Applications that have strict EMI requirements, such as medical suites Applications with high motion activity or rotating machinery Most commonly used driver output For more information, please use the following resources: LED Driver Selection Tool ( Lutron LED ontrol enter of Excellence (.877.DIM.LED8 or LEDs@lutron.com) Dimming LEDs via PWM and R application note #360 L A4UU ontrol Type: 3D = Eco or 3-wire control TE = -wire forward phase control (neutral required) Type: KS = ompact, Studded KN = ompact, Non-studded KL = ompact, UL Listed (on a Junction box) MN = Stick, Non-studded LED Load Output Range lass onstant Voltage A = 0.0 V.0 V B =.5 V 0.0 V = 0.5 V 4.0 V D = 4.5 V 38.0 V Isolated Non-lass onstant Voltage X = 38.5 V 60.0 V* Isolated Non-lass onstant urrent Y = 0.0 A 0.50 A 30 V 60 V* Z = 0.5 A.00 A 30 V 60 V** urrent Level (for onstant urrent): 00 = 0.0 A; 0 = 0. A 0 =.0 A Voltage Level (for onstant Voltage): 00 = 0.0 V; 05 = 0.5 V 600 = 60.0 V Driver Output: = onstant current driver with pulse width modulation (PWM) dimming A = onstant current driver with constant current reduction (R) dimming V = onstant voltage driver with pulse width modulation (PWM) dimming lass onstant urrent E = 0.0 A 0.50 A 30 V 54 V F = 0.5 A.00 A 30 V 54 V** G = 0.0 A 0.70 A 8 V 0 V H = 0.0 A 0.70 A 5 V 38 V I = 0.7 A.05 A 8 V 0 V J = 0.7 A.05 A 5 V 38 V K =.06 A.50 A 8 V 0 V L =.06 A.50 A 5 V 38 V** M =.5 A.0 A 8 V 0 V** 54 Lutron Lutron 55

30 Drivers and s LED driver model numbers Drivers and s LED driver model numbers How to build a model number: Hi-lume A-Series W LED Driver with UL and cul Recognition ertification (% dimming) L3DA5UUK _ - Style: S = Studded N = Non-Studded ontrol Type: urrent Level (for onstant urrent): 07 = 0.7 A; 07 = 0.7 A 05 =.05 A Driver Output: Example: L3DA5UUKS-NA05 For further assistance selecting your model number, use or contact our LED enter of Excellence at or LEDS@lutron.com NEW Eco H-Series (up to 40 W) LED Driver with UL Recognition (% dimming) Dimming to % with fade to/from black ompatible with Lutron Eco digital controls only Energy saving Wattage Output Range Model Number ontrol Type Type Leads Voltage See below LDE4UUKS Eco K N UNV = W See below LDE4UUKN Eco K N UNV = 0 77 How to Build a Model Number, K- Type: Eco H-Series (up to 40 W) LED Driver LDE4UUK _ - _ A 3D = Eco or 3-wire control = onstant current driver with pulse width modulation (PWM) dimming A = onstant current driver with constant current reduction (R) dimming Style: S = Studded (K-case only) N = Non-Studded urrent Level (for onstant urrent): 00 = 0.0 A; 0 = 0. A 070 = 0.70 A 40 =.40 A LED Driver Output Range lass onstant urrent N = 0.7 A.05 A; 35 V 54 V* Isolated Non-lass onstant urrent W = 0.7 A.05 A; 35 V 60 V* LED Load Output Range (see the following pages for more detail): lass onstant urrent A = 0. A 0.45 A, 3 50 V-*, 7 W 7.5 W B = 0.33 A 0.70 A, V-*, 55 W 35 W = 0.46 A 0.9 A, 6 39 V-*, 3 W 7 W D = 0.30 A 0.75 A, 30 V-*, 8 W 6 W E = 0.7 A.05 A, 3 50 V-*, W 40 W F = 0.7 A.40 A, 6 38 V-*, 9 W 40 W G = 0.93 A.40 A, 0 6 V-, 4 W 8 W H = 0.63 A.05 A, 0 V-, 8 W 7 W * KS, KN, MN only ** Output voltage range changes with output current and power limits. heck driver specifications carefully. Purchaser is responsible for electrical compatibility between driver and LED load. Find the driver specification submittal at Attention: Model numbers may appear similar to Lutron Hi-lume A-Series drivers, but Eco H-Series drivers are not a direct model-for-model replacement for Hi-lume A-Series drivers. Please note the driver s output rating and the load ratings to select the correct product for your fixture. * Output voltage range changes with output current and power limits. heck driver specifications carefully. Purchaser is responsible for electrical compatibility between driver and LED load. Find the driver specification submittal at 56 Lutron Lutron 57

31 Drivers and s LED driver model numbers Drivers and s LED driver model numbers NEW Eco H-Series (up to 75 W) LED Driver with UL and cul recognition (% dimming) Dimming to % with fade-off and fade-on ompatible with Lutron Eco digital controls only Energy saving Wattage Output Range Model Number ontrol Type Type Leads Voltage 5 35 W See below LDE3UUMN Eco M N UNV = W See below LDE5UUMN Eco M N UNV = W See below LDE7UUMN Eco M N UNV = 0 77 How to Build a Model Number, M- Type: Eco H-Series (up to 75 W) LED Driver LDE_UUMN-_A example: LDE3UUMN-BA A, 5 W to 8 W,.5 40 V-** LED driver For further assistance selecting your model number, contact our LED enter of Excellence LED Load Power Range at LEDs@lutron.com 3 = 5 W 35 W 5 = 5 W 50 W 7 = 35 W 75 W urrent Level (for onstant urrent): 050 = 0.50 A; 0 =.0 A LED Load Output Range (see the following pages for more detail): lass onstant urrent B = 0.50 A.5 A, 0 40 V-*, 5 W 35 W = 0.88 A.75 A, 0 40 V-*, 5 W 50 W D =.5 A.0 A, 0 40 V-*, 35 W 75 W T = 0.40 A 0.83 A, V-*, 5 W 35 W U = 0.70 A.33 A, V-*, 5 W 50 W V =.00 A.88 A, V-*, 40 W 75 W Attention: Model numbers may appear similar to Lutron Hi-lume A-Series drivers, but Eco H-Series drivers are not a direct model-for-model replacement for Hi-lume A-Series drivers. Please note the driver s output rating and the load ratings to select the correct product for your fixture. *Output voltage range changes with output current and power limits. heck driver specifications carefully. Purchaser is responsible for electrical compatibility between driver and LED load. Find the driver specification submittal at **Minimum voltage of LDE53UUMN-BA070 limited by 5 W minimum power. NEW Eco 5-Series (up to 35 W) LED Driver with UL and cul recognition (5% dimming) Dimming to 5% ompatible with Lutron Eco digital controls only Energy saving Wattage Output urrent Model Number ontrol Type Type Leads Voltage 8 35 W.400 A LDE53UUKN-LA40 Eco K (N) N UNV = W.400 A LDE53UUKS-LA40 Eco K (S) N UNV = W.400 A LDE5UUKN-KA40 Eco K (N) N UNV = W.400 A LDE5UUKS-KA40 Eco K (S) N UNV = W.050 A LDE53UUKN-JA05 Eco K (N) N UNV = W.050 A LDE53UUKS-JA05 Eco K (S) N UNV = W.050 A LDE5UUKN-MA05 Eco K (N) N UNV = W.050 A LDE5UUKS-MA05 Eco K (S) N UNV = W 0.93 A LDE5UUKN-MA093 Eco K(N) N UNV = W 0.93 A LDE5UUKS-MA093 Eco K(S) N UNV = W 0.89 A LDE5UUKN-MA089 Eco K(N) N UNV = W 0.89 A LDE5UUKS-MA089 Eco K(S) N UNV = W 0.85 A LDE5UUKN-MA085 Eco K(N) N UNV = W 0.85 A LDE5UUKS-MA085 Eco K(S) N UNV = W A LDE53UUKN-RA070 Eco K (N) N UNV = W A LDE53UUKS-RA070 Eco K (S) N UNV = W A LDE5UUKN-FA070 Eco K (N) N UNV = W A LDE5UUKS-FA070 Eco K (S) N UNV = W A LDE5UUKN-QA070 Eco K (N) N UNV = W A LDE5UUKS-QA070 Eco K (S) N UNV = W 0.66 A LDE5UUKN-FA066 Eco K(N) N UNV = W 0.66 A LDE5UUKS-FA066 Eco K(S) N UNV = W 0.63 A LDE5UUKN-FA063 Eco K(N) N UNV = W 0.63 A LDE5UUKS-FA063 Eco K(S) N UNV = W 0.60 A LDE5UUKN-FA060 Eco K(N) N UNV = W 0.60 A LDE5UUKS-FA060 Eco K(S) N UNV = W A LDE5UUKN-PA050 Eco K (N) N UNV = W A LDE5UUKS-PA050 Eco K (S) N UNV = W A LDE5UUKN-NA050 Eco K (N) N UNV = W A LDE5UUKS-NA050 Eco K (S) N UNV = W 0.46 A LDE5UUKN-NA046 Eco K(N) N UNV = W 0.46 A LDE5UUKS-NA046 Eco K(S) N UNV = W 0.44 A LDE5UUKN-NA044 Eco K(N) N UNV = W 0.44 A LDE5UUKS-NA044 Eco K(S) N UNV = W 0.4 A LDE5UUKN-NA04 Eco K(N) N UNV = W 0.4 A LDE5UUKS-NA04 Eco K(S) N UNV = W A LDE5UUKN-GA035 Eco K (N) N UNV = W A LDE5UUKS-GA035 Eco K (S) N UNV = Lutron Lutron 59

32 Drivers and s LED driver model numbers Drivers and s LED driver model numbers NEW Eco 5-Series (up to 75 W) LED Driver with UL and cul recognition (5% dimming) Dimming to 5% ompatible with Lutron Eco digital controls only Energy saving Wattage Output Range Model Number ontrol Type Type Leads Voltage 5 35 W See below LDE53UUMN-BA _ Eco M N UNV = W See below LDE55UUMN-A _ Eco M N UNV = W See below LDE57UUMN-DA _ Eco M N UNV = 0 77 How to build a model number: Eco 5-Series (up to 75 W) LED driver with UL recognition LDE5 UUMN A Hi-lume A-Series LED Drivers (% dimming) with E/ENE ertification Dimming to % ompatible with Lutron Eco and DALI digital controls Energy saving Wattage Output Range Model Number ontrol Type Type Leads Voltage 5 5 W See below LDEAEPA- _ Eco/DALI P N 0 40 HOW TO BUILD A MODEL NUMBER: EOSYSTEM 5-5 W LED DRIVER WITH E ERTIFIATION (% DIMMING) L DE AE PA LED Load Power Range 3 = 5 W 35 W 5 = 5 W 50 W 7 = 35 W 75 W urrent Level (for onstant urrent): 050 = 0.50 A; 0 =.0 A ontrol Type: DE = Digital Only Eco LED Driver urrent Level (for onstant urrent): 00 = 0.0 A; 0 = 0. A 00 =.05 A Voltage Level (for onstant Voltage): 00 = 0.0 V; 05 = 0.5 V 400 = 40.0 V LED Load Output Range lass onstant urrent B = 0.50 A.5 A, 0 40 V-*, 5 W to 35 W = 0.88 A.75 A, 0 40 V*-*, 5 W to 50 W D =.5 A.0 A, 0 40 V-*, 35 W to 35 W T = 0.40 A 0.83 A, V-*, 5 W to 35 W U = 0.70 A.33 A, V-*, 5 W to 50 W V =.00 A.88 A, V-*, 40 W to 75 W Led Load Output Range onstant Voltage A = 8.0 V.0 V* B =.5 V 0.0 V* = 0.5 V 4.0 V* D = 4.5 V 40.0 V.05 A and 5 W Maximum Driver Output: = onstant current driver with pulse width modulation (PWM) dimming A = onstant current driver with constant current reduction (R) dimming V = onstant voltage driver with pulse width modulation (PWM) dimming onstant urrent G = 0.0 A 0.70 A 8 V 0 V H = 0.0 A 0.70 A 5 V 40 V I = 0.7 A.05 A 8 V 0 V J = 0.7 A.05 A 5 V 40 V * 40 V and 5 W Maximum * Output voltage range changes with output current and power limits. heck driver specifications carefully. Purchaser is responsible for electrical compatibility between driver and LED load. Find the driver specification submittal at * Output voltage range changes with output current and power limits. heck driver specifications carefully. Purchaser is responsible for electrical compatibility between driver and LED load. Find the driver specification submittal at 60 Lutron Lutron 6

33 Drivers and s LED driver model numbers Drivers and s LED driver model numbers Eco 5-Series (up to 35 W) LED driver with E/NE certification (5% dimming) Dimming to 5% ompatible with Lutron Eco and DALI digital controls Energy saving Wattage Output urrent Model Number ontrol Type Type Leads Voltage 0 35 W A LDE53ERN-RA070 Eco/DALI R N W.050 A LDE53ERN-JA05 Eco/DALI R N W.400 A LDE53ERN-LA40 Eco/DALI R N W A LDE5ERN-PA050 Eco/DALI R N W A LDE5ERN-FA070 Eco/DALI R N W.050 A LDE5ERN-MA05 Eco/DALI R N W.400 A LDE5ERN-KA40 Eco/DALI R N W A LDE5ERN-GA035 Eco/DALI R N W A LDE5ERN-NA050 Eco/DALI R N W 0.50 A LDE5ERN-GA05 Eco/DALI R N W A LDE5ERN-QA070 Eco/DALI R N W.050 A LDE5ERN-SA05 Eco/DALI R N 0 40 NEW Eco 5-Series (up to 50 W) LED Driver with E certification (5% dimming) Dimming to 5% ompatible with Lutron Eco and DALI digital controls Energy saving Wattage Output Range Model ontrol Type Type Leads Voltage 5 50 W See below LDE53EMN-UA _ Eco/DALI M N 0 40 Hi-lume A-Series LED Drivers (% dimming) with PSE ertification Dimming to % ompatible with Lutron -wire forward phase controls Energy saving Wattage Output Range Model Number ontrol Type Type Leads Voltage 5 3 W See below LTE A3UU - _ -wire,fwd Phase K (S) N 00 How to build a model number: Hi-lume A-Series 5-3 W LED driver with pse certification (% DIMMING) LTEA3DK _ - Style: S = Studded N = Non-Studded Example: LTEA3DKN-JA00 For further assistance selecting your model number, contact Lutron Asuka at (phone), (freephone) or asuka@lutron.com urrent Level (for onstant urrent): 00 = 0.0 A; 0 = 0. A 00 =.00 A 50 =.50 A Driver Output: = onstant current driver with pulse width modulation (PWM) dimming A = onstant current driver with constant current reduction (R) dimming How to build a model number: Eco 5-Series (up to 50 W) LED driver with E certification LDE55EMN UA LED Load Power Range 5 = 5 W 50 W urrent Level (for onstant urrent): 070 = 0.70 A; 07 = 0.7 A 33 =.33 A LED Driver Output Range onstant urrent G = 0.0 A 0.70 A 8 V 0 V H = 0.0 A 0.70 A 5 V 38 V J = 0.7 A.05 A 5 V 38 V* L =.06 A.50 A 5 V 38 V* LED Load Output Range lass onstant urrent U = 0.70 A.33 A, V * Output voltage range changes with output current and power limits. heck driver specifications carefully. Purchaser is responsible for electrical compatibility between driver and LED load. Find the driver specification submittal at 6 Lutron Lutron 63

34 Drivers and s LED driver model numbers Drivers and s OEM design components NEW Eco 5-Series (up to 35 W) LED driver with PSE certification (5% dimming) Dimming to 5% ompatible with Lutron Eco digital controls only Energy saving Wattage Output urrent Model Number ontrol Type Type Leads Voltage 0 35 W A LDE53DJTN-RA070 Eco T N 00/ W.050 A LDE53DJTN-JA05 Eco T N 00/ W.400 A LDE53DJTN-LA40 Eco T N 00/00 5 W A LDE5DJTN-PA050 Eco T N 00/00 5 W A LDE5DJTN-FA070 Eco T N 00/00 5 W.050 A LDE5DJTN-MA05 Eco T N 00/ W.400 A LDE5DJTN-KA40 Eco T N 00/ W A LDE5DJTN-GA035 Eco T N 00/ W A LDE5DJTN-NA050 Eco T N 00/ W A LDE5DJTN-QA070 Eco T N 00/ W.050 A LDE5DJTN-SA05 Eco T N 00/00 The L3D-FG is designed to aid LED fixture manufacturers in the design of their fixtures by giving them the capability of manipulating the output parameters of an LED driver. It enables tuning a programmable Hi-lume A-Series LED driver for lumens per watt, total lumen output, input power, and output type. The included software allows generating, testing, and verifying the exact model number for an application without waiting for samples. OEM onfiguration Kits/Interface Family Interface Model Description Hi-lume A-Series LED Driver OEM Kits Replacement omponents Replacement omponents for Hi-lume A-Series LED Driver OEM onfiguration Kits L3D-FG-KS L3D-FG-KN L3D-FG-MN L3D-FG L3DA4UUKS-AOEM L3DA4UUKS-BOEM L3DA4UUKS-OEM L3DA4UUKS-AOEM L3DA4UUKS-3AOEM L3DA4UUKN-AOEM L3DA4UUKN-BOEM L3DA4UUKN-OEM L3DA4UUKN-AOEM L3DA4UUKN-3AOEM L3DA4UUMN-AOEM L3DA4UUMN-BOEM L3DA4UUMN-OEM L3DA4UUMN-AOEM L3DA4UUMN-3AOEM Kit includes all hardware and software required to configure 5 studded K-case drivers Kit includes all hardware and software required to configure 5 non-studded K-case drivers Kit includes all hardware and software required to configure 5 M-case drivers Hi-lume A-Series LED driver P interface OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only OEM kit driver replacement only 64 Lutron Lutron 65

35 Drivers and s QwikFigTM Manufacturing onfiguration Kits Drivers and s QwikFigTM Manufacturing onfiguration Kits Terms and onditions. The Lutron LED Driver QwikFig system is offered to a fixture manufacturer (OEM) to enable the OEM to program Lutron LED drivers in the OEM's manufacturing facilities (OEM y).. The OEM shall provide Lutron with the name and address of a primary (Primary OEM ontact) and secondary contact for all matters relating to the QwikFig Program, and provide timely updates to Lutron should these QwikFig contact(s) change by ing oemorders@lutron.com. 3. The OEM shall program each Lutron configurable LED driver using the QwikFig software and hardware included in the QwikFig configuration system in accordance with the QwikFig User Guide provided by Lutron. 4. After a Lutron configurable LED driver is programmed using the QwikFig configuration system, the QwikFig software will print a label with information specific to the OEM. The OEM must apply the label to the Lutron configured LED driver. The OEM shall not modify the label from the format specified by Lutron and shall use a printer and label stock that is approved by Lutron. Blank labels are to be purchased from the supplier of your choice; Lutron will provide the approved label manufacturer part numbers. Without the LED driver configuration data (as printed on the label) Lutron will have limited ability to assist LED driver end-users. As such, if the OEM does not apply the label to the configured LED driver, the OEM will be solely responsible for managing all LED driver warranty claims with respect to that driver with the customer. The OEM would then be able to present a warranty claim to Lutron for those drivers; Lutron s existing processes for the presentation of a warranty claim to Lutron remain in effect. 5. Routine maintenance on the QwikFig equipment is required to keep the system running smoothly. Lutron shall provide a maintenance manual (and any updates) for the QwikFig configuration system to the primary point of contact via . The OEM shall perform all maintenance in accordance with the maintenance manual. Lutron reserves the right to deny warranty claims on QwikFig enabled LED drivers programmed on equipment that is not maintained as described in the maintenance manual. 6. QwikFig software must be routinely updated to the current QwikFig software release version. Lutron shall post updates on mylutron.com and shall the primary point of contact when an update to the QwikFig software and database is available. The Primary OEM contact will be setup with an account at mylutron.com. The OEM shall promptly update the QwikFig Software upon receipt of such notification from Lutron. Lutron reserves the right to deny warranty claims on QwikFig enabled LED drivers programmed on equipment that does not have the most current release version of the QwikFig software installed. 7. The QwikFig software shall maintain a record of the serial number and configuration for each Lutron LED configurable driver programmed using the QwikFig configuration system. The primary OEM ontact must the files exported by the QwikFig Software quarterly for warranty recording purposes to Lutron s QwikFig Program Administrator (oemorders@lutron.com). In the event that the OEM do not forward the required QwikFig software files, Lutron reserves the right to deny warranty claims on those QwikFig enabled LED drivers. 8. The OEM is responsible for obtaining all certifications and approvals needed to sell the final product (UL, etc.). 9. Lutron strongly recommends that the OEM end-of-line test each lighting fixture containing a Lutron LED driver in their manufacturing facility. At a minimum the test must include high end, low-end, and off levels. 0. ALL PRODUTS RETURNED TO LUTRON FOR WARRANTY LAIM EVALUATION MUST INLUDE THE RGA NUMBER ON THE OUTSIDE OF THE PAKAGE AND ON THE ENLOSED PAKING LIST. Failure to include the RGA number as indicated may result in the warranty claim being denied by Lutron, no credit being issued, and/ or the package being returned at your expense. Any Lutron product replaced under warranty will be shipped to the same destination address as the original Lutron product being replaced under warranty was initially shipped.. Lutron reserves the right to invoice the OEM a commercially reasonable fee to investigate or assist in the resolution of an issue caused by the Lutron manufactured LED driver being configured improperly by the OEM.. The OEM agrees to hold Lutron harmless from any third party claims of personal injury or property damage caused by: a) the OEM s products, b) the OEM s improper configuration of the Lutron LED driver, and/or c) the OEM s failure to adhere to the above terms. The OEM shall have no obligation to hold Lutron harmless to the extent the Lutron manufactured LED driver is the cause of the loss. QwikFig OEM onfiguration Model Number QWIKFIG-KIT-A (A-Series) QWIKFIG-NEST-A (A-Series) QWIKFIG-PRN Description A-Series LED driver programming nest and printer Replacement A-Series LED driver nest Replacement printer QwikFig OEM onfiguration bulks in case quantity (4 drivers/case) Hi-lume A-Series Model Number QwikFig enabled LED Driver Model Numbers L3DA4UUKN-E L3DA4UUKN-F L3DA4UUKN-3ABLK L3DA4UUKN-G L3DA4UUKN-GBLK L3DA4UUKN-H L3DA4UUKN-HBLK L3DA4UUKN-I L3DA4UUKN-K L3DA4UUKN-RBLK L3DA4UUKN-J L3DA4UUKN-L L3DA4UUKN-SBLK L3DA4UUKN-M _ L3DA4UUKN-ABLK L3DA5UUKN-N L3DA5UUKN-3BBLK L3DA5UUKN-W L3DA5UUKN-BBLK L3DA4UUKN-Y L3DA4UUKN-Z L3DA4UUKN-ABLK L3DA4UUKS-E L3DA4UUKS-F L3DA4UUKS-3ABLK L3DA4UUKS-G L3DA4UUKS-GBLK L3DA4UUKS-H L3DA4UUKS-HBLK L3DA4UUKS-I L3DA4UUKS-K L3DA4UUKS-RBLK L3DA4UUKS-J L3DA4UUKS-L L3DA4UUKS-SBLK L3DA4UUKS-M L3DA4UUKS-ABLK L3DA5UUKS-N L3DA5UUKS-3BBLK L3DA5UUKS-W L3DA5UUKS-BBLK L3DA4UUKS-Y L3DA4UUKS-Z L3DA4UUKS-ABLK L3DA4UUMN-E L3DA4UUMN-F L3DA4UUMN-3ABLK L3DA4UUMN-G L3DA4UUMN-I L3DA4UUMN-BLK L3DA4UUMN-K L3DA4UUMN-H L3DA4UUMN-J L3DA4UUMN-BBLK L3DA4UUMN-L L3DA4UUMN-M L3DA4UUMN-ABLK L3DA4UUMN-Y L3DA4UUMN-Z L3DA4UUMN-ABLK 66 Lutron Lutron 67

Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers Understanding ballast model numbers Lutron ballast model numbers are designed to illustrate basic

36 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers Understanding ballast model numbers Lutron ballast model numbers are designed to illustrate basic information about the ballast. For example: T8 Linear and U-bent Eco H-Series (% or less dimming) universal voltage digital dimming ballasts Eco H-Series ballasts EHD T8 3 M U 0 Family Lamp type Lamp wattage size factor Lamp quantity Universal voltage Generate part numbers, confirm ballast performance specifications (input power, system lumens, ballast factor) and select the proper ballast by utilizing the Selection Tool. This tool also enables users to choose a ustom (percentage of light output for a given lamp-ballast combination). Reduced ballast factors achieve greater energy savings and are available for all Lutron ballasts with Eco control. Eco ballasts E5 T5 36 J UNV Family Lamp quantity Lamp type Universal voltage Lamp wattage size NEW Dimming to % or less ompatible with Lutron Eco digital controls only Energy saving and cost effective Lamp Watts (Length) 3 W (48 in [ cm]) 5 W (36 in [9 cm]) Lamps per 3 Model Number EHD T83 M U 0 4,5 EHD T83 M U 7 4,5 EHD T83 M U 0 4,5 EHD T83 M U 7 4,5 EHD T83 G U 3 0 4,5 EHD T83 G U 3 7 4,5 Type M M M M EHD T85 M U 0 5 M EHD T85 M U 0 5 M G G Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , , , , Selection Tool with ustom. Find and configure the ballast that best fits your project: For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 NEMA Premium models available. Add a -NP to the model number when ordering (ie: EHD T83 M U 0 -NP). 5 BAA models available. Add a U to prefix of model number when ordering (ie: UEHD T83 M U 0) V ballasts are SA certified only. 68 Lutron Lutron 69

37 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T8 Linear and U-bent Reduced Wattage T8 Linear and U-bent (cont.) Eco H-Series (% or less dimming) universal voltage digital dimming ballasts Dimming to % or less ompatible with Lutron Eco digital controls only Energy saving and cost effective Lamp Watts (Length) 7 W (4 in [6 cm]) 3 W (48 in [ cm]) Lamps per Model Number Type EHD T87 M U 0 5 M EHD T87 M U 0 5 M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , EHD T , EHD T , EHD T , EHD T , Eco H0-Series (0% dimming) universal voltage digital dimming ballasts Dimming to 0% for reduced wattage (energy-saving) lamps ompatible with Lutron Eco digital controls only Energy saving and cost effective Lamp Watts (Length) 8 W (48 in [ cm]) Lamps per Model Number Type EHD T88 M U RW M EHD T88 M U RW M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) (lm/w) (BEF) Relative (RSE) , , , , , , For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 NEMA Premium models available. Add a -NP to the model number when ordering (ie: EHD T83 M U 0 -NP). 5 BAA models available. Add a U to prefix of model number when ordering (ie: UEHD T83 M U 0) V ballasts are SA certified only. For case type information see pgs Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 70 Lutron Lutron 7

38 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T8 Linear and U-bent (continued) T8 Linear and U-bent (continued) Hi-lume 3D (% or less dimming) universal voltage digital dimming ballasts Dimming to % or less ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Energy saving Lamp Watts (Length) 40 W (60 in [5 cm]) 3 W (48 in [ cm]) Lamps per 3 Model Number H3D T840 U 0 H3D T840 U 7 H3D T840 U 0 H3D T840 U 7 H3D T83 U 0 4 H3D T83 G U 0 4 H3D T83 U 7 4 H3D T83 G U 7 4 H3D T83 U 0 4 H3D T83 G U 0 4 H3D T83 U 7 4 H3D T83 G U 7 4 H3D T83 G U H3D T83 G U Type, G G G G G G Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , (cont.) Hi-lume 3D (% or less dimming) universal voltage digital dimming ballasts Dimming to % or less ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Energy saving Lamp Watts (Length) 5 W (36 in [9 cm]) 7 W (4 in [6 cm]) Lamps per 3 Model Number H3D T85 U 0 H3D T85 U 7 H3D T85 U 0 H3D T85 U 7 H3D T87 U 0 4 H3D T87 G U 0 4 H3D T87 U 7 4 H3D T87 G U 7 4 H3D T87 U 0 4 H3D T87 G U 0 4 H3D T87 U 7 4 H3D T87 G U 7 4 H3D T87 G U H3D T87 G U Type G G G G G G Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to the prefix of model number when ordering (ie: UH3D T83 U 0). For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to the prefix of model number when ordering (ie: UH3D T83 U 0). 7 Lutron Lutron 73

39 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T8 Linear and U-bent (continued) Reduced Wattage T8 and U-bent Eco (0% dimming) universal voltage digital dimming ballasts Dimming to 0% ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Integral sensor connections Eco H0-Series (0% dimming) universal voltage digital dimming ballasts Dimming to 0% for reduced wattage (energy-saving) lamps ompatible with Lutron Eco digital controls only Energy saving and cost effective Lamp Watts (Length) 3 W (48 in [ cm]) 5 W (36 in [9 cm]) 7 W (4 in [6 cm]) Lamps per Model Number Type E5 T83 J UNV J 3 E5 T83 J UNV 5 E5 T83 G UNV L 4 E5 T83 G UNV 3L 4,5 E5 T83 G UNV 37L 4 E5 T85 J UNV J E5 T85 J UNV J E5 T87 J UNV J E5 T87 J UNV J J G G G Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , , , , , , , Lamp Watts (Length) 8 W (48 in [ cm]) Lamps per Model Number Type EHD T88 M U RW M EHD T88 M U RW M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 ships with leads. 5 NEMA Premium models available. Add a -NP to the model number when ordering (ie: E5 T83 J UNV -NP). For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 74 Lutron Lutron 75

40 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T5 Linear T5 Linear (continued) Eco H-Series (% dimming) universal voltage digital dimming ballasts Dimming to % ompatible with Lutron Eco digital controls only Energy saving and cost effective Lamp Watts (Length) 8 W (45. in [5 cm]) W (33.4 in [84 cm]) Lamps per Model Number Type EHD T58 M U 0 4 M EHD T58 M U 0 4 M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , EHD T58 M E 0 M 40 0,3 3,, , 0,90 0 0,5 33,0, ,03 0,85 EHD T58 M E 0 M 40 0,6 6,4, ,60 0,90 0 0,9 63,8, ,57 0,88 EHD T , EHD T , , EHD T5 M U 0 4 M , , EHD T5 M U 0 4 M EHD T5 M E 0 M EHD T5 M E 0 M , , , , 6,4, ,79 0,80 0 0, 6,4, ,79 0, ,0 48,0, ,08 0,88 0 0, 46,, ,6 0,9 Eco H-Series (% dimming) universal voltage digital dimming ballasts Dimming to % ompatible with Lutron Eco digital controls only Energy saving and cost effective Lamp Watts (Length) 4 W (.6 in [55 cm]) Lamps per Model Number Type EHD T54 M U 0 4 M EHD T54 M U 0 4 M EHD T54 M E 0 M EHD T54 M E 0 M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , ,08 9,, , 0,73 0 0,09 9,8, ,05 0,7 40 0,5 36,0, ,78 0,78 0 0,6 35,, ,84 0,80 For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to the prefix of model number when ordering (ie: UH3D T83 U 0) V ballasts are SA certified only. For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to prefix of model number when ordering (ie: UH3D T83 U 0). 76 Lutron Lutron 77

41 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers Reduced Wattage T5 Linear T5 Linear (continued) Eco H0-Series (0% dimming) universal voltage digital dimming ballasts Dimming to 0% for reduced wattage (energy-saving) lamps ompatible with Lutron Eco digital controls only Energy saving and cost effective Lamp Watts (Length) 3W (.6 in [55 cm]) 5 / 6 W 3 (45. in [5 cm]) Lamps per Model Number Type EHD T53 M U RW M EHD T53 M U RW M EHD T55 M U RW M EHD T55 M U RW M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) (lm/w) (BEF) Relative (RSE) , , , , , , , , , , , , Hi-lume 3D (% dimming) universal voltage digital dimming ballasts Dimming to % ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Energy saving Lamp Watts (Length) 8 W (45. in [5 cm]) W (33.4 in [84 cm]) 4 W (.6 in [55 cm]) Lamps per Model Number Type H3D T58 U 0 4 H3D T58 U 0 4 H3D T5 U 0 4 H3D T5 U 0 4 H3D T54 U 0 4 H3D T54 U 0 4 Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , For case type information see pgs For case type information see pgs Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to prefix of model number when ordering (ie: UH3D T83 U 0). 78 Lutron Lutron 79

42 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T5 Linear (continued) T5 HO Linear Eco (0% dimming) universal voltage digital dimming ballasts Dimming to 0% ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Integral sensor connections Eco H-Series (% dimming) universal voltage digital dimming ballasts Dimming to % ompatible with Lutron Eco digital controls Energy saving and cost effective Lamp Watts (Length) 35 W (57. in [45 cm]) 8 W (45. in [5 cm]) W (33.4 in [84 cm]) 4 W (.6 in [55 cm]) Lamps per Model Number Type E5 T535 J UNV J E5 T58 J UNV J E5 T58 J UNV J E5 T5 J UNV J E5 T5 J UNV J E5 T54 J UNV J E5 T54 J UNV J Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , Lamp Watts (Length) 54 W (45. in [5 cm]) 39 W (33.4 in [84 cm]) Lamps per Model Number Type EHD T554 M U 0 4 M EHD T554 M U 0 4 M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , EHD T554 M E 0 M 40 0,6 6,4, ,60 0,87 0 0,9 63,8, ,57 0,85 EHD T554 M E 0 M 40 0,48 5,, ,87 0,94 0 0,5,, ,89 0,96 EHD T , EHD T , , EHD T539 M U 0 4 M , , EHD T539 M U 0 4 M EHD T539 M E 0 M EHD T539 M E 0 M , , , ,8 43,, ,3 0,90 0 0,9 4,8, ,39 0, ,34 8,6, ,96 0 0,39 85,8, ,7 0,9 For case type information see pgs For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to the prefix of model number when ordering (ie: UEHD T83 M U 0) V ballasts are SA certified only. 80 Lutron Lutron 8

43 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T5 HO Linear (continued) T5 HO Linear (continued) Eco H-Series (% dimming) universal voltage digital dimming ballasts Dimming to % ompatible with Lutron Eco digital controls Energy saving and cost effective Lamp Watts (Length) 4 W (.6 in [55 cm]) Lamps per Model Number Type EHD T54 M U 0 4 M EHD T54 M U 0 4 M EHD T54 M E 0 M EHD T54 M E 0 M Reduced Wattage T5 HO Linear Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , 8,8, ,47 0,83 0 0,3 8,6, ,50 0, , 5,8, ,89 0,9 0 0,5 55,0, ,8 0,87 Eco H0-Series (0% dimming) universal voltage digital dimming ballasts Dimming to 0% for reduced wattage (energy-saving) lamps ompatible with Lutron Eco digital controls only Energy saving and cost effective Hi-lume 3D (% dimming) universal voltage digital dimming ballasts Dimming to % ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Energy saving Lamp Watts (Length) 54 W (45. in [5 cm]) 39 W (33.4 in [84 cm]) 4 W (.6 in [55 cm]) Lamps per Model Number Type H3D T554 U 0 4 H3D T554 U 0 4 H3D T539 U 0 4 H3D T539 U 0 4 H3D T54 U 0 4 H3D T54 U 0 4 Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , Lamp Watts (Length) 49/50/5 W 3 (45. in [5 cm]) Lamps per Model Number Type EHD T549 M U RW M EHD T549 M U RW M Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to prefix of model number when ordering (ie: UH3D T83 U 0). For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 BAA models available. Add a U to prefix of model number when ordering (ie: UH3D T83 U 0). 8 Lutron Lutron 83

44 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T5 HO Linear (continued) T5 Twin-Tube Eco (0% dimming) universal voltage digital dimming ballasts Dimming to 0% ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Integral sensor connections Hi-lume 3D (5% dimming) universal voltage digital dimming ballasts Dimming to 5% ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Energy saving Lamp Watts (Length) 54 W (45. in [5 cm]) 39 W (33.4 in [84 cm]) 4 W (.6 in [55 cm]) Lamps per Model Number Type E5 T554 J UNV J E5 T554 J UNV J E5 T539 J UNV J E5 T539 J UNV J E5 T54 J UNV J E5 T54 J UNV J Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , Lamp Watts (Length) 50 W (.5 in [57 cm]) 40 W (.5 in [57 cm]) 36 W (5.5 in [39 cm]) Lamps per Model Number Type H3D T550 G U 0 G H3D T550 G U 0 G H3D T540 G U 0 G H3D T540 G U 0 G 3 H3D T540 G U 3 0 G H3D T536 G U 0 G H3D T536 G U 0 G Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 84 Lutron Lutron 85

45 Drivers and s Fluorescent ballast model numbers Drivers and s Fluorescent ballast model numbers T5 Twin-Tube (continued) T4 ompact Eco (0% dimming) universal voltage digital dimming ballasts Dimming to 0% ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Integral sensor connections Eco (5% dimming) universal voltage digital dimming ballasts Dimming to 5% ompatible with Lutron 3-wire fluorescent controls and Eco digital controls Energy saving Lamp Watts (Length) 55 W (0.7 in [5 cm]) 50 W (.5 in [57 cm]) 40 W (.5 in [57 cm]) 36/39 W (5.5 in [39 cm]) Lamps per Model Number Type E5 T555 J UNV J E5 T555 J UNV J E5 T550 J UNV J E5 T550 J UNV J E5 T540 J UNV J E5 T540 J UNV J 3 E5 T540 G UNV 3L 4 G E5 T536 J UNV J E5 T536 J UNV J Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , , , , , , , Lamp Watts 4 W (Triple Tube) 3 W (Triple Tube) 6 W (Triple/Quad Tube) 8 W (Triple/Quad Tube) Lamps per Model Number Type E3D T44 K U S 4 K E3D T44 K U S 4 K E3D T4MW K U S 4 K E3D T4MW K U S 4 K E3D T4MW K U S 4 K E3D T4MW K U S 4 K E3D T48 K U S 4 K E3D T48 K U S 4 K Voltage (VA) urrent (A) Power (W) (BF) Lumens (lm) 3 (lm/w) 3 (BEF) Relative (RSE) , , , , , , , , , , , , , , , , , , , , , , , , For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 ships with leads. For case type information see pgs y-tuned ballast factors available. To customize, visit 3 Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 4 Mounting studs standard. Delete -S suffix in the model number if mounting studs are not needed. 86 Lutron Lutron 87

46 Drivers and s models by country Drivers and s models by country The following ballast model numbers have certifications specific to certain countries. For details on these ballast models, visit The following ballast model numbers have certifications specific to certain countries. For details on these ballast models, visit Europe (E) EHD T54 M E 0 EHD T54 M E 0 EHD T5 M E 0 EHD T5 M E 0 EHD T54 M E 0 EHD T54 M E 0 EHD T58 M E 0 EHD T58 M E 0 EHD T539 M E 0 EHD T539 M E 0 EHD T554 M E 0 EHD T554 M E 0 Brazil (INMETRO) EHD T53 M E RW-B EHD T53 M E RW-B EHD T55 M E RW-B EHD T55 M E RW-B EHD T549 M E RW-B EHD T549 M E RW-B EHD T83 M E 0-B EHD T83 M E 0-B EHD T54 M E 0-B EHD T54 M E 0-B EHD T5 M E 0-B EHD T5 M E 0-B EHD T54 M E 0-B EHD T54 M E 0-B EHD T58 M E 0-B EHD T58 M E 0-B EHD T539 M E 0-B EHD T539 M E 0-B EHD T554 M E 0-B EHD T554 M E 0-B hina () EHD T54 M E 0- EHD T54 M E 0- EHD T58 M E 0- EHD T58 M E 0- EHD T554 M E 0- EHD T554 M E 0- Mexico (NOM) H3D T87 G U 0 N H3D T87 G U 0 N H3D T85 G U 0 N H3D T85 G U 0 N H3D T83 G U 0 N H3D T83 G U 0 N H3D T83 G U 3 0 N H3D T87 U 0 N H3D T87 U 0 N H3D T85 U 0 N H3D T85 U 0 N H3D T83 U 0 N H3D T83 U 0 N H3D T83 U 7 N H3D T83 U 7 N H3D T54 U 0 N H3D T54 U 0 N H3D T5 U 0 N H3D T5 U 0 N H3D T54 U 0 N H3D T54 U 0 N H3D T58 U 0 N H3D T58 U 0 N H3D T536 G U 0 N H3D T536 G U 0 N H3D T539 U 0 N H3D T539 U 0 N H3D T540 G U 0 N H3D T540 G U 0 N H3D T540 G U 3 0 N H3D T550 G U 0 N H3D T550 G U 0 N E5 T54 J UNV N E5 T54 J UNV N E5 T5 J UNV N E5 T5 J UNV N E5 T54 J UNV N E5 T54 J UNV N E5 T58 J UNV N E5 T58 J UNV N E5 T535 J UNV N E5 T536 J UNV N E5 T536 J UNV N E5 T539 J UNV N E5 T539 J UNV N E5 T540 J UNV N E5 T540 J UNV N E5 T550 J UNV N E5 T550 J UNV N E5 T554 J UNV N E5 T554 J UNV N E5 T555 J UNV N E5 T555 J UNV N E5 T87 J UNV N E5 T87 J UNV N E5 T85 J UNV N E5 T85 J UNV N E5 T83 J UNV N E5 T83 J UNV N E3D T48 K U N E3D T48 K U S N E3D T48 K U N E3D T48 K U S N E3D T4MW K U N E3D T4MW K U S N E3D T44 K U N E3D T44 K U S N E3D T44 K U N E3D T44 K U S N EHD T54 M U 0 N EHD T54 M U 0 N EHD T5 M U 0 N EHD T5 M U 0 N EHD T54 M U 0 N EHD T54 M U 0 N EHD T58 M U 0 N EHD T58 M U 0 N EHD T539 M U 0 N EHD T539 M U 0 N EHD T554 M U 0 N EHD T554 M U 0 N EHD T87 M U 0 N EHD T87 M U 0 N EHD T85 M U 0 N EHD T85 M U 0 N EHD T83 M U 0 N EHD T83 M U 0 N EHD T83 M U 7 N EHD T83 M U 7 N EHD T88 M U RW N EHD T88 M U RW N EHD T55 M U RW N EHD T55 M U RW N EHD T53 M U RW N EHD T53 M U RW N EHD T549 M U RW N EHD T549 M U RW N H3D T554 U 0 N E3D T4MW K U N H3D T554 U 0 N E3D T4MW K U S N 88 Lutron Lutron 89

Appendix Related products Appendix ontrol wiring diagrams Stairwell Retrofit Kit The stairwell retrofit kit allows you to transform high-cost/ high-maintenance fluorescent fixtures into energy

47 Appendix Related products Appendix ontrol wiring diagrams Stairwell Retrofit Kit The stairwell retrofit kit allows you to transform high-cost/ high-maintenance fluorescent fixtures into energy efficient solutions with the addition of dimming and occupancy sensing, and by updating the fixtures with more efficient lamps. Once a fixture has been retrofitted with this kit, it will communicate wirelessly with Lutron Radio Powr SavrTM occupancy / vacancy sensors (sold separately) to control the stairwell lighting. By controlling the dimming ballast, the wireless control turns the lights in a stairwell to a high light level when it s occupied, and to a low light level when it s unoccupied. PRODUT FXRS Fixture Retrofit Kit Solution PRODUT FAMILY SW Stairwell PRODUT TYPE XX Standard SIZE # LAMPS LAMP TYPE REGION ONTROLS SOKETS x ft 3 x 3 ft lamp lamps 4 4 W T5HE, ft 7 7 W T8, ft U UL North America 5 50% occupied 0% unoccupied 8 80% occupied 0% unoccupied XX None SK Sockets per lamp Eco digital link control Eco digital link control, -case, J-case, or M-case Neutral onstant Hot/Live* E E Neutral onstant Hot/Live* Eco digital link control, G-case NEU N/ HOT E E NEU N/ HOT LINE lass Bus Ground** LINE or Driver Features Power and digital link terminals accept only one 6 8 AWG (0.75 mm to.50 mm ) wire See table/charts on pg. 8 for Eco digital link wiring details Kit includes 4 x 4 ft 8 x 8 ft Integral wireless control device with RF receiver and faceplate Lutron % dimming ballast with leads Pre-wired Lutron dimming ballast for T8, T5HE, or T5HO lamps Wireless control (PowPak stairwell controller) Wallplate (laro single gang) Rapid-start sockets (optional) 3 3 lamps, T8 4 4 lamps W T5HE, 3 ft 4 4 W T5HO, ft 5 5 W T8, 3 ft 8 8 W T5HE, 4 ft 3 3 W T8 4 ft W T5HO, 3 ft W T5HO, 4 ft RW 5, 8 W T8 reduced wattage, 4 ft Not included (but necessary for proper installation): Single-gang wallbox (for mounting wireless control). Note: The wireless control cannot be mounted inside the fixture (will interfere with RF communication). oupling to fit a.875 in ( mm) knockout, used to mount the wallbox and wireless control to the exterior of the fixture. Jumper wire for the yellow socket connections (wired in parallel) in a -lamp or 3 lamp application. ontact Fixtures ustomer Service or fixtures@lutron.com for further information. E E Neutral onstant Hot/Live* E E GND NEU DH HOT E E E E LINE lass Bus lass Bus N/ or sensors Ground** Eco digital link control, K-case or KL-case (View from bottom) or Driver Ground Terminals may be located on side and bottom. K-case can be grounded via case or ground terminal. L-case can be grounded via ground terminal on the enclosure or in the junction box. * The onstant Hot / Live must not be wired to a switching device when using Eco control. ** is grounded via case only. 90 Lutron Lutron 9

Fluorescent ballast and LED driver

Fluorescent ballast and LED driver Selection uide Lutron s and drivers Lutron Table of contents Fluorescent ballast and LED driver selection guide Introduction 2 Scalable light management solutions 4 Understanding