The EDX ethos of quality and durability coupled with our enthusiasm for cutting edge technology has led to our most complete range yet.

Transcription

1 The EDX ethos of quality and durability coupled with our enthusiasm for cutting edge technology has led to our most complete range yet. Catalogue 2011/12

2 The EDX ethos of quality and durability coupled with our enthusiasm for cutting edge technology has led to our most complete range yet. The long hours spent in research and development have paid dividends and although many of the advantages can be seen immediately, the most important benefits will be felt when the machine is still running perfectly after extensive use. Whilst pursuing innovation, we have not allowed this to compromise on build quality, demanding only the best when it comes to armatures, bearings, brushes etc... giving you the peace of mind needed when working in challenging environments.

3 Contents Sanding & Polishing E10 Variable Speed Drum Sander/Polisher 07 E20 Variable Speed Tube Sander/Polisher 09 E15 Variable Speed Weld Seam & Pipe Polisher/Sander 11 Grinding & Bevelling SG30 Variable Speed Straight Grinder 15 DG1028 Variable Speed Die Grinder/Polisher 16 DG2760 Variable Speed Die Grinder/Polisher 17 DG2045 Variable Speed Long Neck Die Grinder 18 BV3060 Variable Speed Beveller 19 BV2365 Variable Speed Beveller 20 BV30MA Multi-Angle Beveller 21 Drilling EM12 Low Profile Mag Drill 24 Cutting MS3700 Metal Cutting Circular Saw 28 MS1300 Metal Cut Off Saw 30 MS1021 Variable Speed Reciprocating Saw 32

4 04

5 Sanding & Polishing When it comes to giving you a professional finish first time - every time, you want a product that is proven to get the job done. Our extensive new range of EDX Sanders and Polishers are designed with performance and long-term functionality in mind. Developed for use indoors and out, EDX high performance Sanders and Polishers are quick and easy to use and engineered to last longer. 05

6 The 1200 watt motor is equipped with variable full wave feedback electronic speed control for a smooth even finish. No matter what the load, the motor keeps the same even speed. A wide variety of sleeves is available for the inflatable rubber sanding drum. The rubber cushion follows the surface contours of the piece being worked on for an unbeatable finish. The drive pulley runs inward-facing belts for finishing tube forms. The hook and loop closing strap allow the belts to be opened and closed around closed tube forms. Bulk sanding rolls can be turned into belts. 06

7 E10 Variable Speed Drum Sander/Polisher The E10 Variable Speed Drum Sander/Polisher is the perfect machine for the perfect finish. The 1200 watt motor effortlessly provides power smoothly right through the speed range, thanks to the full wave feedback given by the state-of-the-art electronic variable speed control. Soft grip rubber pads for user comfort. Variable speed control. Trigger lock. E10 Inflatable rubber sanding drum conforms to the surface (pump included). Can fit: Sanding sleeves in various grits, fine sanding sponge sleeves, surface conditioning (fleece) sleeves. Plastic carry case. Specifications Model: E10 Variable Speed Drum Sander/Polisher Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Full Load RPM: Power Input: 1200 Watt (with feedback speed stabilisation) Weight: 3.00kgs Insulation: Double insulation / class II Standard Equipment 1x Inflatable rubber sanding drum 1x Air pump 1x Drive pulley for pumps 10x Arbor spacer discs (40,19, 5mm) 1x Plastic carry case 07

8 08

9 E20 E20 Variable Speed Tube Sander/Polisher The E20 Variable Speed Tube Sander/Polisher is the ideal choice for all pipe polishing and finishing. The superb design includes adjustable arms to ensure an all round finish can be achieved with the minimum effort. The 1200 watt motor with the speed range of rpm delivered through the legendary EDX speed control makes the E20 the ultimate tool for tubular finishing. Aluminium drive roller. Guide roller with outer flange. Specifications Model: E20 Variable Speed Tube Sander/Polisher Motor: 1200W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Surface RPM: 3-12m/sec Belt Size: 760mm x 40mm Weight: 3.44kgs Standard Equipment 1x Spare drive wheel 1x Spare guide wheel 1x Grip handle 09

10 10

11 E15 Variable Speed Weld Seam & Pipe Polisher/Sander A superb machine, the E15 Variable Speed Weld Seam & Pipe Polisher/Sander is designed such that the application pressure acts directly on the drive roller, ensuring an unparalled finish on all pipework including stainless steel. The raised front guard and rubber front wheel also allows for weld seam finishing, giving an excellent finish on all welds. The E15 works perfectly with the industry standard size belts - 40mm x 620mm. External brush caps. E15 High efficiency motor with variable full-wave feedback electronic speed control. Specifications Model: E15 Variable Speed Weld Seam & Pipe Polisher/Sander Power: 1500Watt Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Surface RPM: 15-28m/sec Max. Belt Length: 620mm Max. Belt Width: 40mm Weight: 4.0kgs Standard Equipment 1x Grip handle 11

12 12

13 Grinding & Bevelling When it came to creating our new range of next generation EDX Grinders and Bevellers, we listened to what our customers wanted. That s why when you choose from our new range, you ll find an extensive choice of power tools that are designed with functionality and durability at their core. 13

14 14

15 SG30 SG30 Variable Speed Straight Grinder Robust and versatile, the SG30 Variable Speed Straight Grinder with its powerful 1600 watt motor is the number one choice for brushing and polishing. Whether working with stainless steel or specialist vehicle manufacturing, this EDX machine has all the credentials needed for these challenging industries. Specifications Model: Power: Voltage: No Load RPM: Spindle: Max. Wheel Diameter: Weight: SG30 Variable Speed Straight Grinder 1600W 110V / 60Hz or 230V / 50Hz (with feedback electronic speed stabilisation) M14 (w/ 20mm tool holder) 150mm 5.6kgs Standard Equipment 1x Guard 2x Clamping flanges (20mm disk holder) 1x Open ended wrench 1x Holding wrench Taper threaded mount Variable speed 15

16 DG1028/2760 Variable Speed Die Grinder/Polisher With particular emphasis on a low overall weight, versatility and superb ergonomics, the DG1028 Variable Speed Die Grinder is the ideal tool for intricate grinding. The 1200 watt motor with variable full wave feedback electronic speed control provides the necessary control for working in difficult-to-reach places. For polishing applications of a similar type, the DG2760 Variable Speed Die Polisher should be used. High-Speed Model (DG1028) Long-reach spindle. 16 Specifications Model: DG1028 Variable Speed Die Grinder/Polisher Power: 1200W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Collet: 6mm (sizes 3mm, 1 /4, 8mm also available) Max. Wheel Diameter: 50mm Dimensions: 410mm (L) x 72mm (W) x 77mm (H) Soft Start & Overload Protection: Weight: 2.2kg (4.84lbs) Standard Equipment Wrench 2 pcs Variable speed wheel with feedback electronic speed stabilisation

17 Large thumb switch. Low-Speed Model (DG2760) DG1028/2760 Specifications Model: DG2760 Variable Speed Die Grinder/Polisher Power: 1200W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Collet: 6mm (sizes 3mm, 1 /4, 8mm also available) Max. Wheel Diameter: 50mm Dimensions: 510mm (L) x 72mm (W) x 77mm (H) Soft Start & Overload Protection: Weight: 2.4kg (5.3lbs) Standard Equipment Wrench 2 pcs Variable speed wheel with feedback electronic speed stabilisation 17

18 DG2045 Variable Speed Long Neck Die Grinder Sharing the same motor and design features as the Die Grinder/ Polisher, the DG2045 Variable Speed Long Neck Die Grinder is ideally suited for working in those difficult-toreach places. Large thumb switch. Variable speed wheel with feedback electronic speed stabilisation. 18 Specifications Model: DG2045 Variable Speed Long Neck Die Grinder Power: 1200W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Collet: _ Max. Wheel Dia.: 152mm Dimensions: 590mm (L) x 165mm (W) x 130mm (H) Soft Start & Overload Protection: _ Weight: 3.5kg (7.7lbs) Standard Equipment Wrench 2 pcs Hex wrench M6 Lock nut wrench

19 BV3060 Variable Speed Beveller Thanks to a free bevel depth setting, the BV3060 Variable Speed Beveller is the quick and convenient solution for adding bevels and deburring. Using standard triangle carbide inserts, the tool is excellent for following curved shapes and uses the legendary variable speed control to work on a wide variety of surfaces in a quick and easy manner. Size handle (attach to either side). Indexable triangle carbide insert. Impeller Tool holder. Variable speed wheel. Main handle. On/off trigger switch with lock pin. DG2045/BV3060 Specifications Model: BV3060 Variable Speed Beveller Power: 1200W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Bevel Angle: 45 0 (optional 30 0 ) Max. Bevel Height (45 0 ): 6mm Min. Diameter for Inside Bevels: 20mm Weight: 4.6kg (10.12lbs) Hard Shell Case: 572mm x 362mm x 238mm Standard Equipment Torx wrench Hook spanner wrench Spindle lock bar 19

20 BV2365 Variable Speed Beveller The BV2365 Variable Speed Beveller is a heavy-duty hand held beveller which uses five indexable carbide inserts for chatter-free beveling. Capable of beveling straight edges, contours and cutouts with ease, the tool works with steal, stainless steel, aluminium, copper, plastic and other materials. The precision dial scale allows for precise adjustment of the chamfer height enabling detailed use. A stable cutting speed is enabled (no matter the load) due to the variable electronic speed control. The standard tool holder is at 45 o with a 30 o tool holder available as an option. Variable speed with feedback electronic speed stabilisation. Trigger switch. Powerful 1.8kw motor. 5 carbide insert tool holder. Specifications Model: BV2365 Variable Speed Beveller Power: 1800W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Speed Wheel Settings: 1/2/3/4/5/6: 2300/2600/3700/4800/5800/6500 Std. Bevel Angle: 45 0 Max. Chamber Height: 45 0 : 10.6mm Min. Dia. for Inside Bevels: 30mm Standard Equipment Tool holder 45 0 Carbide inserts (set of five) Torx wrench Hook spanner wrench Spindle lock bar Hex wrench Hard shell case Optional Accessories 30 0 tool holder Dimensions: 430mm (L) x 150mm (W) x 190mm (H) (not including front handle) 20 Hard Shell Case: Weight: 572mm x 362mm x 238mm 6.5kgs (14.3lbs)

21 BV30MA Multi-Angle Beveller The powerful 1100 watt high torque AC induction motor offer long-life and quiet running. The BV30MA Multi-Angler Beveller utilises a ten carbide insert tool holder with a full angular adjustment from 15 0 to 60 o. A compact and handy tool, it is robust for ease of moving and convenient in use. On/off switch. Side handle. Handle. AC induction motor. Impeller. 10 carbide insert tool holder. Specifications Standard Equipment Depth adjust nut. Front handle. BV2365/30MA Model: Power: Voltage: BV30MA Multi-Angle Beveller 1100W 110V / 60Hz or 230V / 50Hz No Load RPM: 60Hz: 3600, 50Hz: 3000 Angular Adjustment: mm Tool Holder Carbide insert Hex wrench M8 Hex wrench M3 M32 combination wrench Wrench 27mm x 24mm mm mm mm mm Dimensions: 475mm (L) x 296mm (W) x 247mm (H) Max. Chamber Height: 45 0 : 10.6mm Weight: 19.3kgs (42.46lbs) 21

22 22

23 Drilling Who says a Mag-Drill can t be improved? At EDX we don t just look at what is right with a tool - we look at what is wrong with it. Then we improve it. That s why when you choose an EDX low profile Mag-Drill, you re choosing a product that has been developed to work in the tightest of spaces. 23

24 EM12 Low Profile Mag Drill With a very low profile, the EM12 Low Profile Mag Drill can be used in spaces previously impossible to reach with conventional mag-drills. Despite a total height of only 198mm, conventional 35mm length cutters can still be used - there s no requirement for special cutters. Good balance for carrying. Quick release arbor for fast cutter changes. Annular cutter (not included). Pilot pin (not included). LED light for work in dark spaces. 24

25 Motor & Magnet switches EM12 Specifications Model: EM12 Low Profile Mag Drill Power: 1100W Voltage: 110V / 60Hz or 230V / 50Hz No Load/Full RPM: 650/ 390 Max. Capacity Dia. x Depth of Cut: 35mm x 30mm Weldon Shank: 19mm Magnetic Adhesion: 1500N Overload Protection: Dimensions: 285mm (L) x 1010mm (W) x 200mm (H) Weight: 10kgs (22.4lbs) Standard Equipment Wrench M8 Hex key M2.5 Hex key M4 Safety belt 25

26 26

27 Cutting Like every EDX power tool, our new range of next generation Saws are designed with precision to give you a never before realised level of control and flexibility. Specifically designed for metal cutting, EDX Saws combine functionality with durability and safety to ensure that from the first cut to the last, you re guaranteed a safe and accurate job. 27

28 MS3700 Metal Cutting Circular Saw TPI grip best comfort. Lock-off safety switch. Bayonet Lock-thread blade cover. For quick chip clearing. Safety blade guard. High stability base. Adjustable rip fence. 28 The purpose built MS3700 Metal Cutting Circular Saw uses TCT metal cutting blades to cut steel, stainless steel, aluminium and other metals. Amazing in performance, it cuts metal as easily as conventional circular saws cut wood, efficiently and without overheating. Super quick chip clearing with the unique bayonet-type blade cover latch. The ergonomically shaped and positioned handle with a soft TPR grip is the result of extensive lab testing enabling maximum operator comfort and minimum fatigue. The tool can also be used as a beveller for bevels up to 45 o with no loss of convenience. Easy to read, positive stops for all the most popular bevel angles with quick and easy adjustment. The tool offers a high stability base with quick, tool-free adjustment including clearly marked scales as well as high output motors for all the torque needed to perform even the most challenging cuts. Finally a safety features include a lock-off switch and spark/chip containing design, all of which combine to give exact, clean cuts in a variety of metal - every time.

29 Ergonomically designed handle is in line with the blade for ideal balance, control and ease of pushing. High output motor. Base mount bracket for side handle. MS3700 Bevels up to tool-free bevel changes with five detents. Cutting guide. Specifications Model: MS3700 Metal Cutting Circular Saw Power: 1700W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: 3700 Bevels: 0 to 45 0 Blade: 200mm (8 0 ) Arbor: 30mm (1-3/16 )or 25.4mm (1 ) Cutting Capacities: Straight cut: 67mm (2-5/8 ) 45 0 Bevel: 42mm (1-5/8 ) Soft Start & Overload Protection: Weight: 6.3kg (13.6lbs) Standard Equipment Hard shell case Side handle Wrench Optional Accessories Speed control box Soft start & overload protection unit Blade 29

30 MS1300 Metal Cut Off Saw The MS1300 Metal Cut-Off Saw uses the latest innovations in saw blade technology to drycut steel, aluminium, stainless steel and other metals. The dry cut saw blade shears through the material over three times faster than traditional cut-off saws that make use of abrasive wheels - all with less sparks and less heat with the result that the cut is accurate, clean and particularly free of burrs. Arbor lock. Carriage Lock. On/Off Switch. See-through shield. Handy wrench storage. High output 15A 2200W motor with auto-stop brushes. Two-piece lower blade guard. Chip tray. Tool-free fence lock. High-stability cast aluminium alloy base. 30

31 Quick-lock vice speed crank. Fence with scale swivels 45 0 in both directions (right & left). Quick detents for popular mitre angles. MS1300 Specifications Model: MS1300 Metal Cut Off Saw Power: 2200W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Round Pipe 132mm Square Stock 120mm (W) x 120mm (H) Rectangular Stock 180mm (W) x 180mm (H) Right Hand Mitre 45 0 Round Pipe 105mm Square Stock 90mm (W) x 90mm (H) Rectangular Stock 90mm (W) x 120mm (H) Left Hand Mitre Arbor: 25mm (1 ) Soft Start: Overall Dimensions: 680mm x 360mm x 580mm Weight: 23.5kgs (51.7lbs) Standard Equipment 4mm Hex. wrench 6mm Hex. wrench 8mm Hex. wrench Standard Accessories V-Jig Block Blade Safety goggles 31

32 MS1021/1021D Variable Speed Reciprocating Saw The MS1021 Variable Speed Reciprocating Saw brings together all the features you need for a rugged, effective reciprocating saw without the gimmicks. The orbital reciprocating mechanism is specially designed for long term durability combined with excellent impact resistance. With its pipe vice and straight handle, the MS1021 is a particularly effective pipe cutting saw. For general metal cutting tasks, make use of the MS1021D D-handled version. MS1021 Straight handle version 26mm (1 ) stroke. Pipe vice. Chain clamp. Quick-release chain vice. 32 Specifications Model: MS1021 Variable Speed Reciprocating Saw (straight handle version) Power: 1500W Voltage: 110V / 60Hz or 230V / 50Hz No Load RPM: Stroke: 26mm (1 ) Overall Dimensions: 491mm (L) x 94mm (W) x 108mm (H) Weight: 4.35kg (10lbs) Standard Equipment Hex wrench Quick-release chain vice Optional Accessories 2-in-1 vice

33 Durable high-impact reciprocating mechanism with aggressive orbital action. Speed control thumbwheel. Feedback electronically speed stabilisation circuitry maintains speed under load. Ergonomic grip with soft boot, Zamak gear case for superior durability. Professional grade motor with overload protection and soft-start. Externally accessible full-stop brushes. Pivot shoe. MS1021D D-handle version Specifications Model: MS1021D Variable Speed Reciprocating Saw (D-handle version) Standard Equipment Hex wrench Power: 1500Watt Voltage: 110V / 60Hz or 230V / 50Hz Optional Accessories No Load RPM: in-1 vice Stroke: 26mm (1 ) Overall Dimensions: 463mm (L) x 94mm (W) x 108mm (H) Weight: 4.35kg (10lbs) 33MS1021/1021D

34

35 Product Guarantee INTRODUCTION This guarantee applies only to EDX Power Tools purchased through an appointed UK distributor. The supplier of these products throughout England, Wales, Scotland, Northern Ireland and the Republic of Ireland is Aristospray UK trading as EDX. It should be noted that your contract of sales is with the appointed distributor from whom the product was purchased. In the unlikely event that you are not satisfied with this product you should in the first instance approach the distributor from whom the product was purchased. Any faults or damage apparent on receipt must be reported within fourteen days of purchase. Any claim made under the terms of this guarantee must be accompanied by proof of purchase. Problems arising from incorrect setup, adjustment or maintenance are the responsibility of the end-user and are not covered by the terms of this guarantee. Support is available in the first instance from the distributor who made the supply. GUARANTEE In the addition to the above Aristospray UK guarantees that for a period of twelve months from the date of purchase the components of this product will be free from defects caused by faulty construction or manufacture. During this period defects recognised by Aristospray UK as being covered by the guarantee as stated above will be corrected either by means of repair of the faulty tool free of charge or by replacement with a tool in perfect working order. Retained tools for which a replacement has been provided shall become the property of Aristospray UK. This is provided that: The claims procedure has been followed as set out below; Aristospray UK are given reasonable opportunity after receiving notice of the claim of examining the product; If asked to do so by Aristospray UK or its appointed distributor the product is returned to Aristospray UK s premises or other approved premises such as those of the distributor for examination; The fault in question is not caused by continuous industrial use, accidental damage, fair wear and tear, willful damage, negligence on your part, incorrect electrical connection, unapproved modification, abnormal working conditions, failure to follow the instructions issued with each machine, misuse, or alteration or repair of the product without the approval of Aristospray UK; This product has been purchased for your own use and not for hire purposes; The Guarantee extends to the cost of carriage incurred by the purchaser returning the product to Aristospray UK, as long as it is demonstrated that the defect falls within the terms of this Guarantee and that the claims procedure as set out below is adhered to. CLAIMS PROCEDURE In the first instance please contact the distributor from whom the machine was purchased. Many initial problems with machines, originally thought to be due to faulty parts, are solved by correctly setting up or adjustment of the machines. Your distributor should be able to resolve the majority of these issues much more quickly than processing a claim under the guarantee. If the distributor who supplied the product to you has been unable to satisfy your query, any claim made under this Guarantee should be made directly to Aristospray UK. The claim itself should be made by or in writing to Aristospray UK and should include your contact details, proof of purchase and give an explanation of the problem leading to the claim. N.B. It is essential that this written claim reaches Aristospray UK by the last day of the period covered by this Guarantee. No late claims will be considered. You will be contacted by a representative of Aristospray UK once your initial written claim has been received. If it is necessary to return the item, in most cases Aristospray UK will arrange for collection or will provide FREEPOST information to enable return. A returns number will be issued by Aristospray UK which must be used on all documentation accompanying the return. NOTICE This Guarantee applies to all EDX Power Tools purchased from an appointed distributor of Aristospray UK within the United Kingdom of Great Britain and Northern Ireland and the Republic of Ireland. This Guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. This Guarantee is offered as an extra benefit and does not affect your statutory rights as a consumer. Additional copies of this Guarantee are available. Please send a stamped and self addressed envelope for each copy of the Guarantee requested.

36 London EDX Granville House Wallingford Road, Uxbridge Middlesex, UB8 2RW T +44 (0) F +44 (0) E sales@edx-tools.co.uk Dublin EDX Unit 45 Baldoyle Industrial Estate Dublin 13 T +353 (0) F +353 (0) E sales@edx-tools.co.uk