STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) PERCENTAGE DISCOUNT OFF LIST PRICING. Percentage Discount to be applied to Price List

Transcription

1 SEQ. # (Turf Maintenance Equipment) STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) Page 1 of 2 October, 2017 Vendor Name: Edney Distributing Co., Inc. Contact Person Dave Mosier Street Address: th St W P.O. Box: 1236 City, State, Zip Lakeville, MN, Phone #: Toll Free #: Fax #: Address: sales@edneyco.com Website: PERCENTAGE DISCOUNT OFF LIST PRICING 1.0 Catalog Section / Price List Title and Date Warranty Attached Percentage Discount to be applied to Price List 20% Discount Date & Price List I.D. Number Price for Additional Set of Fluid and Air Filters Attached Price for Set of Repair, Parts and Operating Manuals $14.00 Discount off List Price for related parts and accessories See Special Terms and Conditions 20% Discount/0% non-contract Vendor Owned Rental Return Or Demo Equipment Program See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price N/A 0% Discount 2.0 DELIVERY STARTING POINT - CITY, STATE, ZIP CODE Price per loaded mile $2.00 (See Special Terms and Conditions - No Flat Rate Allowed) 3.0 INSTALLATION - PER HOUR (Hourly Shop Rate): Installation services may be requested on an "as needed" basis - see special terms and conditions.) $100.00

2 TURF Management T-775(5) RESPONDER'S NAME: Edney Distributing Co., Inc. SWIFT EVENT NUMBER: SWIFT Event Number #7883 Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will provide the required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions before any State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor location number and the vendor location number, i.e., COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAME Edney Distributing Co., Inc. VN th St W / Lakeville MN / Dave Mosier Niebur Tractor VN th St E / Hastings MN / Dan Beissel Smiths Mill VN th St / Janesville MN / Rick Eichhorst Adkins Equipment, Inc. VN Cty Hwy 21 / Detroit Lakes MN / Jeff Adkins Olson Power & Equipment VN th Ave / North Branch MN / Dan Olson Lano Equipment VN Hwy 212 W / Norwood MN / Jack Lano Jaycox Implement VN West Roehn / Luverne MN / Mark Ommen Kranz Lawn & Power VN MN-7 / Hutchinson MN / Marshall Kranz Melrose Implement VN Hwy 13 South / Melrose MN / Dave Wenker Miller-Sellner Implement, Inc. VN State Hwy 4 / Sleepy Eye MN / Doug Miller Titan Machinery VN Hwy 28 E / Graceville MN / Gary Hoffman or Shantelle Findlay Titan Machinery VN Ingersoll Ave / Crookston MN / Craig Morgan Titan Machinery VN St Hwy 200 / Ada MN / Steve Rude Titan Machinery VN US Hwy 59 NE / Thief River Falls MN / Jay Knott Titan Machinery VN South Borud St / Winger MN / Kathy Iverson Tjosvold Equipment VN th Ave / Granite Falls MN / Jon Tjosvold Wabasha Implement VN N Wabasha / Plainview MN / Jack Decker Kesteloot Enterprises VN Co. Rd 8 / Marshall MN / Daren Kesteloot Mid-Central Equipment VN US Hwy 210 W / Henninig MN / Dick Trana Miner Outdoor Power VN _ th St SE / Blooming Prairie MN / Doug Miner MOR Golf and Utility VN _ th St / Lakeville MN / Tammy Gruidl Winona Attrition Mill In Progress 1009 W 5th St / Winona MN / Ed Tomashek Northland Farm Systems VN Hoffman Dr N / Owatonna MN / John Losee

3 GRASSHOPPER PRICING Prices FOB Moundridge, KS USA The Grasshopper Company MidMount Models - Quick Reference V Series Models 10% off / Model 124V with 41 in. Deck $5, / Model 124V with 48 in. Deck $5, / / / Model 125V with 48 in. Deck Model 125V with 52 in. Deck Model 125V with 61 in. Deck $6,111 $6,210 $6, / Model 126V with 52 in. Deck $6,044 / Model 126V with 61 in. Deck $6,179 / Model 225V with 52 in. Deck $7,425 / Model 225V with 61 in. Deck $7,560 / Model 226V with 52 in. Deck $7,259 / Model 226V with 61 in. Deck $7,394 / Model 227V EFI with 52 in. Deck $7,871 / Model 227V EFI with 61 in. Deck $8,006 M1 Series - Standard Models % off / Model 225 with 48 in. Deck $9,437 / Model 225 with 52 in. Deck $9,491 / Model 225 with 61 in. Deck $9,779 / Mod. 327-EFI with 52 in. Deck $10,386 / Mod. 327-EFI with 61 in. Deck $10,656 / Model 329B with 52 in. Deck $10,089 / Model 329B with 61 in. Deck $10,314 / Model 329B w/ 72 in. Deck $10,746 / Model 335 with 61 in Deck $11,043 / Model 335 with 72 in Deck $11,412 / Model 321D with 48 in. Deck $12,726 (Special Order) / Model 325D with 52 in. Deck $13,244 / Model 325D with 61 in. Deck $13,482 / Model 325D with 72 in. Deck $13,856 / Model 329 with 52 in. Deck $12,816

4 / Model 329 with 61 in. Deck $13,055 / Model 329 with 72 in. Deck $13,442 / Model 432 with 61 in. Deck (61-in. model is Special Order) $13,824 / Model 432 with 72 in. Deck $14,283 / Model 400D 1.3L with 61" Deck $15,885 / Model 400D 1.3L with 72" Deck $16,232 FrontMount Models / Decks - Quick Reference 500V Series - Air Cooled / Single Tail Wheel 10% off / Model 524V with 42 in. Deck $6,885 $7, / Model 526V with 52 in. PF Deck $7,826 $8, Order ALL numbers indicated. Counterweight and PowerFold ARE included in prices below. 600 Series - Air Cooled / Single Tail Wheel 700 Series - Air Cooled/Wide-Stance Tail Wheels (Deduct $190 if Single Tail Wheel preferred b ) 10% off / Model 725KT (52") PF Deck $11,457 $12, (Includes Wide-Stance Tail Wheels) a / Model 725KT (61") PF Deck $11,898 $13, (Includes Wide-Stance Tail Wheels & C-WT) b / Model 725KT (72") PF Deck $12,339 $13, (Includes Wide-Stance Tail Wheels & C-WT) / Model 727T EFI-3452 (52") PF Deck $12,218 $13, (Includes Wide-Stance Tail Wheels) a / Model 727T EFI-3461 (61") PF Deck $12,659 $14, (Includes Wide-Stance Tail Wheels & C-WT) b / Model 727T EFI-3472 (72") PF Deck $13,100 $14, (Includes Wide-Stance Tail Wheels & C-WT) / Model 729BT (52") PF Deck $11,826 $13, (Includes Wide-Stance Tail Wheels) a / Model 729BT (61") PF Deck $12,267 $13, (Includes Wide-Stance Tail Wheels & C-WT) b / Model 729BT (72") PF Deck $12,708 $14, (Includes Wide-Stance Tail Wheels & C-WT)

5 / Model 735BT (52") PF Deck $12,452 $13, (Includes Wide-Stance Tail Wheels) a / Model 735BT (61") PF Deck $12,893 $14, (Includes Wide-Stance Tail Wheels & C-WT) b / Model 735BT (72") PF Deck $13,334 $14, (Includes Wide-Stance Tail Wheels & C-WT) a: Counterweight required. b: At least 2 tail wheels & C-WT required with 72-inch decks. FrontMount Models / PowerFold (PF) Decks - Quick Reference Order ALL numbers indicated. Counterweight and PowerFold ARE included in prices below. 700 Series - Liquid Cooled / Wide-Stance Tail Wheels / Model 721DT (52") PF Deck 10% off MS $13,442 $ / Model 725DT (52") PF Deck $14, / Model 725DT (61") PF Deck $15, a / Model 725DT (72") PF Deck $15, (Includes C-WT) / Model 729T (52") PF Deck $14, / Model 729T (61") PF Deck $14, a / Model 729T (72") PF Deck $15, (Includes C-WT) 900 Series - Liquid Cooled / Wide-Stance Tail Wheels 10% off / Model (52") Deck $16, / Model (61") Deck $16, a / Model (72") Deck $16, (Includes C-WT) / Model 900D 1.3L (61") Deck $18, a / Model 900D 1.3L (72") Deck $18, (Includes C-WT) a: Counterweight required. MidMount Models V SERIES MODELS 124V, 125V, 126V, 225V, 226V, 227V EFI

6 Model 124V-41 includes 24 HP* (724 cc) B&S Commercial Turf V-Twin vertical gas engine with Advance Management System, Torqmotor wheel motor and closed-loop piston pump drive system with CoolFan, 3-gal. fuel capacity, Roll Bar, CoolTemp Cordura ComfortZone USR seat, A Cup Holder, and fabricated deck with DropPin height adjust system, 8" spindle flange and maintenance sealed spindle bearings. 20x10x8 Turf Drive Tires and 13x5x6 pneumatic front tires. 75 Order # 10% off Model 124V with 41 in. Deck $5, / $6, Model 124V-48 includes 24 HP* (724 cc) B&S Commercial Turf V-Twin vertical gas engine with cyclonic system, Torqmotor wheel motor and closed-loop piston pump drive system with CoolFan, 6.5-gal. fu Roll Bar, Adjustable Cup Holder, and 48-inch fabricated deck with DropPin height adjust system, 8" sp and maintenance-free sealed spindle bearings. CoolTemp Cordura ComfortZone USR seat. 20x10x10 Turf Drive Tires and 13x6.5x6 pne tires with double-sealed bearings. 75 Order # 10% off / Model 124V with 48 in. Deck $5, $6, Model 125V includes 25HP* (747cc) Kohler Confidant V-Twin vertical gas engine with cyclonic air filtratio Torqmotor wheel motor and closed-loop piston pump drive system with CoolFan, 6.5-gal. fuel capac Adjustable Cup Holder, and either 48-, 52 or 61-in. fabricated deck with DropPin height adjust system, flange and maintenance-free sealed spindle bearings. CoolTemp Cordura ComfortZone USR seat Turf Drive Tires with 48- & 52-inch models; 20x12x10 Turf Drive Tires with 61-inch model and 13x6.5x6 front tires with double-sealed bearings. 75 Order # 10% off Model 125V with 48 in. Deck $6, $6, / Model 125V with 52 in. Deck $6, $6, / Model 125V with 61 in. Deck $6, $7, / 64150

7 Model 126V includes 26 HP* (810 cc) B&S Commercial Turf V-Twin vertical gas engine with cyclonic air system, Torqmotor wheel motor and closed-loop piston pump drive system with CoolFan, 6.5-gal. fu Roll Bar, Adjustable Cup Holder, and 52- or 61-inch fabricated deck with DropPin height adjust system flange and maintenance-free sealed spindle bearings. CoolTemp Cordura ComfortZone USR seat Turf Drive Tires with 52-in. deck; 20x12x10 Turf DriveTires with 61-in. deck; and 13x6.5x6 pneumatic fro double- sealed bearings. 75 Order # 10% off / Model 126V with 52 in. Deck $6, $6, / Model 126V with 61 in. Deck $6, $6, V SERIES MODELS Continued Model 225V includes 25 HP* (747 cc) Kohler Confidant V-Twin vertical gas engine with cyclonic air f system, ROPS, design-matched pump & wheel motor drive system with CoolFan, 12-gal. fuel capa CoolTemp Cordura ComfortZone USR seat, Fabricated Deck with 8" spindle flange, Adjustable Cup Holder. 23x10.50x12 Turf Drive Tires on 52-in. model and 24x12x12 Turf Drive Tires on 61-in. model, 13x6.5x6 Front Tires with double-sealed bearings. 95 Order # 10% off Model 225V with 52 in. Deck $7, $8, / Model 225V with 61 in. Deck $7, $8, / Model 226V includes 26 HP* (810 cc) B&S Commercial Turf V-Twin vertical gas engine with cycloni filtration system, ROPS, design-matched pump & wheel motor drive system with CoolFan, 12-gal. fuel capacity, Adjustable Cup Holder, CoolTemp Cordura ComfortZone USR Fabricated Deck with 8" spindle flange. 23x10.50x12 Turf Drive Tires on 52-in. model and 24x12x12 Tires on 61-in. model, 13x6.5x6 Front Tires with double-sealed bearings. 95 Order # 10% off / Model 226V with 52 in. Deck $7, $8, / Model 226V with 61 in. Deck $7, $8,215.00

8 Model 227V EFI includes 27 HP* (747 cc) Kohler Confident V-Twin EFI vertical gas engine with cyclo filtration system, ROPS, design-matched pump & wheel motor drive system with CoolFan, 12-gal. fuel capacity, CoolTemp Cordura ComfortZone USR seat, Electronic Fuel G Fabricated Deck with 8" spindle flange, Adjustable Cup Holder. 23x10.50x12 Turf Drive Tires on 52- and 24x12x12 Turf Drive Tires on 61-in. model, 13x6.5x6 Front Tires with double-sealed bearings. 95 Order # 10% off / Model 227V EFI with 52 in. Deck $7, $8, / Model 227V EFI with 61 in. Deck $8, $8, M1 SERIES MODELS Model 225 includes 25 HP* (747 cc) Kohler Command PRO V-Twin horizontal gas engine, ROPS, H Air Filtration, design-matched 12 cc pump & wheel motor drive system with CoolFan, 12-gal. fuel c CoolTemp Cordura ComfortZone USR seat, Electronic Fuel Gauge, Rear Bumper Guard and DuraMax Deck. 23x9.5x12 Turf Drive Tires with 48-in. deck; 23x10 Turf Drive Tires with 52-in. deck; 24x12.00x12 Turf Tires with 61-in. deck. 13x6.5x6 pneumatic front t 410 Order # 10% off / Model 225 with 48 in. Deck $9,437 $10, / Model 225 with 52 in. Deck $9,491 $10, / Model 225 with 61 in. Deck $9,779 $10, M1 Series MidMount Units / DuraMax Decks Continued 300 Series EFI (Electronic Fuel Injection) Models Model 327-EFI includes a 27 HP* (747cc) Kohler Command Pro EFI V-Twin horizontal gas engi ROPS, HD Air Filtration, design-matched 16 cc G2 Drive System with CoolFan, 12- gal. fuel ca CoolTemp Cordura ComfortZone USR seat and DuraMax Deck. Adjustable Cup Holder, Electronic Fuel Gauge and Rear Bumper Guard standard. 23x10.50x12 Turf Drive Tires with 52-in. deck; 24x12.00x12 Turf Drive Tires w/ 61- in. decks. 13 pneumatic front tires. 485 Order # 10% off / Mod. 327-EFI with 52 in. Deck $10,386 $11, / Mod. 327-EFI with 61 in. Deck $10,619 $11,840.00

9 300 Series Big Block Air-Cooled Models Model 329B includes a 29 HP* (895cc) Big Block V-Twin horizontal gas engine, ROPS, Heavy Filtration, design-matched 16 cc G2 Drive System with CoolFan, 12-gal. fuel capacity, CoolTe Cordura ComfortZone USR seat, Electronic Fuel Gauge, Adjustable Cup Holder and DuraMax Deck. Standard 23x10.50x12 Turf Drive Tires w/ 52-in. de 24x12.00x12 Turf Drive Tires w/ 61- & 72-in. decks. 13x6.5x6 pneumatic front tires. 460 Order # / Model 329B with 52 in. Deck / Model 329B with 61 in. Deck / Model 329B with 72 in. Deck 10% off $10,089 $11, $10,314 $11, $10,746 $11, Model 335 includes a powerful 35 HP* (993cc) Big Block V-Twin horizontal gas engine, ROPS, Duty Air Filtration, design-matched 16 cc G2 Drive System with CoolFan, 12- gal. fuel capacity Electronic Fuel Gauge, CoolTemp Cordura ComfortZone USR seat, Adjustable Cup Holder and DuraMax Deck. Standard 24x12.00x12 Turf Drive Tires and 13x6.5 pneumatic front tires. 490 Order # 10% off / Model 335 with 61 in Deck / Model 335 with 72 in Deck $11,043 $11,412 $12, $12, Series Liquid-Cooled Diesel Models Model 321D includes a 20.9 HP* (719cc), 3-cylinder, liquid-cooled Kubota diesel engine with Te Sentry, ROPS, Heavy-Duty Air Filtration, design-matched 16 cc G2 Drive System with CoolFan fuel capacity, Electronic Fuel Gauge, Adjustable Cup Holder, CoolTemp Cordura ComfortZone USR seat and deep DuraMax Decks. 23x9.5x12 Turf T 48-in. deck. 13x6.5x6 pneumatic front tires. 565 Order # 10% off / Model 321D with 48 in. Deck $12,726 $14, Note: 321D is Special Order

10 300 Series Liquid-Cooled Diesel Models Continued Model 325D includes a 25 HP* (898cc), 3-cylinder, liquid-cooled Kubota MaxTorque diesel en Temperature Sentry, Heavy-Duty Air Filtration, design-matched 16 cc G2 Drive System with Co gal. fuel capacity, Electronic Fuel Gauge, Adjustable Cup Holder, ROPS, CoolTemp Cordura ComfortZone USR seat and DuraMax Deck. Standard 23x10.5 Drive Tires with 52-in. deck and 24x12.00x12 Turf Drive Tires with 61- & 72 in. decks, 13x6.5x6 front tires. 600 Order # 10% off / Model 325D with 52 in. Deck $13,244 $14, / Model 325D with 61 in. Deck $13,482 $14, / Model 325D with 72 in. Deck $13,856 $15, Series Liquid-Cooled Gas Models Model 329 includes a 29 HP* (962cc), 3-cylinder, liquid-cooled Kubota MaxTorque gasoline e Temperature Sentry, ROPS, Heavy-Duty Air Filtration, 16 cc G2 Drive System with CoolFan, 1 capacity, Electronic Fuel Gauge, Adjustable Cup Holder, CoolTemp Cordura ComfortZone and DuraMax Deck. Standard 23x10.50x12 Turf Drive Tires with 52-in. deck and 24x12.00x12 T Tires with 61- & 72 in. decks, 13x6.5x6 pneumatic front tires. 580 Order # / Model 329 with 52 in. Deck / Model 329 with 61 in. Deck / Model 329 with 72 in. Deck 10% off $14, $14, $13,442 $14, $12,816 $13, Series Liquid-Cooled Models Model 432 includes a 32 HP* (962cc), 3-cylinder, liquid-cooled Kubota MaxTorque gasoline e Hydraulic Height Adjustment, ROPS, Heavy-Duty Air Filtration with Filter Minder, Design-matche Drive System with CoolFan, 12-gal. fuel capacity, Electronic Fuel Gauge, Adjustable Cup Holde CoolTemp Cordura ComfortZone USR seat and DuraMax Deck. Standard 24x12.00x12 T Tires, 13x6.5x6 pneumatic front tires. 615 Order # / Model 432 with 61" Deck Note: 61" model is Special Order 10% off $15, $13, / Model 432 with 72" Deck $14,283 $15, *Note: Gross Horsepower as rated by the engine Manufacturer

11 400 Series Liquid-Cooled Models Continued Model 400D 1.3L includes a 1.3L, 3-cylinder, liquid-cooled Kubota MaxTorque Diesel engine, Height Adjustment, ROPS, Heavy-Duty Air Filtration with Filter Minder, Design-matched 21 cc G System with CoolFan, 12-gal. fuel capacity, Electronic Fuel Gauge, Adjustable Cup Holder, Co Cordura ComfortZone USR seat and DuraMax Deck. Standard 24x12.00x12 Turf Drive Tires pneumatic front tires. 705 Order # / Model 400D 1.3L with 61" Deck 10% off $15,885 $17, / Model 400D 1.3L with 72" Deck $16,232 $18, MidMount Options & Accessories (Alphabetical Order) 4X REAR-DISCHARGE DECKS - Factory Installed Order # / " in lieu of, for 100V / " in lieu of, for 100V / " in lieu of, for 321D-48 $ / " in lieu of, for $ Note: 48" 4X RD "in lieu of" deck kits replace 23x9.5x12 drive tires with 23x8.5x12 drive tires on M1 Models AIR DAM KITS (Field Installed) ANTI-SCALP ROLLER KITS (Field Installed) / " in lieu of, for 100V-52 / " in lieu of, for / " in lieu of, for 325D / / " in lieu of, for 329B / 327EFI-52 / " in lieu of, for 100V-61 / " in lieu of, for / " in lieu of, for 325D / / " in lieu of, for 329B / 335B-61 / 327EFI / " in lieu of, for / " in lieu of, for 325D / / " in lieu of, for 329B / / 327EFI / " in lieu of, for / Air Dam Kit - 48" Deck / Air Dam Kit - 52" Deck / Air Dam Kit - 61" Deck / Air Dam Kit - 72" Deck / Front Corner Rollers, for 48" Decks / SpeedTrim (left-hand corner) for 61" & 72" decks

12 / SpeedTrim (right-hand corner) for 61" & 72" 4XRD / TrimAide (right front corner) for 52" 4XRD decks only / TrimAide (left front corner) for 52" Decks DURAFLEX SUSPENSION FORK OPTION "In lieu of" for M1 models only (not for V Series) / in lieu of, M1 52" models EXCEPT 325D/329 / in lieu of, 52" Models 325D, 329 / in lieu of, 61" 200 / 300 AC / in lieu of, 61" 300 & 400 Series LC / in lieu of, 72" models / Suspension Fork Kit - DuraFlex for M1 & 200V - Field Installed (tires, wheels & bearings not included) (Not used with flat-proof tires) MidMount Options & Accessories continued EDGER, EDGE-EZE (for M1 and 200V Series ) (not for 100V Series) Order # / Edger, electric lift, for 48" or larger side-discharge decks, Right-Side Mount / Edger, electric lift - for 48" or larger rear-discharge decks, Righ-Side Mount / Edger, electric-lift - for 48" or larger side- or reardischarge decks, Left-Side Mount M $ $ $ HEIGHT ADJUSTMENT KITS / Height Adjust Kit - Hydraulic, for 300-LC Ser 61" - 72" decks, in lieu of DropPin height adjust (Standard on 400 Series) / Height Adjustment Kit - Electric, for M1 Series (not for V Series). Includes harness & armrest toggle-switch control. / Height Adjustment Kit - Hydraulic for 300-LC Series 61" - 72" decks, Field Installed (Std on 400 Ser.) LIGHT KITS (Field Installed) / Light Kit - Beacon Strobe (Yellow) / Beacon Light Kit for M1 Models with Alum Canopy / Light Kit - LED Worklights MULCHING PACKAGES - Down-Discharge (Field Installed) / for 41" Deck / for 48" Deep Deck / for 52" Deep Deck

13 / for 61" Deck / for 200 Series (excludes 200V Series) / for 321D, 329B, 335B / / for 72" Deck REAR BUMPER GUARDS - DURAGUARD Heavy Duty (Field Installed) (Note: Rear bumper guards can not be used with PowerVac collection systems) for 325D, 329, 432 ROPS KITS - Foldable / Foldable, in lieu of standard ROPS for M1 Series (not for V Series) / Foldable, in lieu of standard ROPS for 200V / Foldable, dealer installed, for M1 Series with ser. no or greater. (Not for V Series) / Foldable, dealer installed, for 200V Series MidMount Options & Accessories continued SEAT KITS - Cushions / Armrests / Width / Cordura Cushion with Logo Replacement Kit / Fold-Up Armrest Kit, for Cordura Seats / Seat Belt Extension (additional 8 inches) SEAT KITS - Sliding Seat Ajustment Upgrades / Sliding Seat Adjustment for air-cooled models (except Model 124V/41) Field Installed / Sliding Seat Adjustment Upgrade, in lieu of, for 100V Series / Sliding Seat Adjustment Upgrade, in lieu of, for 300 EFI / Sliding Seat Adjustment Upgrade, in lieu of, for 200 M1 Series / Sliding Seat Adjustment Upgrade, in lieu of, for 300/400 Series Liquid-Cooled Models / Sliding Seat Adjustment Upgrade, in lieu of, for 300B Big-Block Models / Sliding Seat Adjustment Upgrade, in lieu of, for 200V Series / Wide Seat Conversion Kit "Big Boy" 2" wider with FoldUp Armrests (Not for Grammer seats.) Includes Seat Belt Extension SEAT KITS - Suspension, Premier (Grammer) in lieu of Suspension Seat Kits: Consider ordering a "big Boy" Steering Lever Kit when installing a Suspension Seat Kit / Premier Suspension Seat - Grammer - in lieu of standard seat on 200 Series (not for 200V Series) / Premier Suspension Seat - Grammer - in lieu of std seat on 300 LC / 400 Ser

14 / Premier Suspension Seat - Grammer - in lieu of standard seat on 300 AC Ser / Rocker Switch & Joystick Mount Kit on Grammer Seat For FIELD-INSTALLED Premier Suspension Seat Assembly - Grammer - order the appropriate Seat Installation Kit toget Premier Suspension Seat Assembly / Grammer Install Kit for 200 Series (not for 200V Ser) $ / Grammer Install Kit for 300 LC / 400 Ser $ / Grammer Install Kit for 300 AC Series $ / Premier Suspension Seat Assembly - Grammer - $ dealer installed / Rocker Switch & Joystick Mount Kit on Grammer Seat SHIELDED SPRAYERS - M1 SERIES & 200V Shielded Sprayers Add Special Shipping Cost of $310 / Shielded Sprayer, 30 gal., single section, 53 Economizer (not expandable) / Spray wand, 25 ft. coil & mount kit / Aux. pump for fertilizer applications MidMount Options & Accessories continued STEERING LEVER OPTIONS / Steering Lever Kit - QuikAjust Tilt Levers (for all MidMount Models EXCEPT 124V/41) / Steering Lever Kit - QuikAjust Extended "Tall Boy" Tilt Levers (Not for V Series) / Steering Lever Kit - Extended, for 200V Models SUNSHADE CANOPIES / Canopy, Aluminum, for ROPS / Canopy, Vinyl, for OPS / ROPS TIRE OPTIONS - Factory Installed / M1 Series, Bar Tread, in lieu of Turf, 24x12x12, for 61" & 72" models only TIRE OPTIONS - Field Installed / M1 Series, Bar Tread Drive Tire Set, 24x12x12 for use with 61" & 72" decks (not for use with 52 deck) / Front Tire & Wheel Assembly - Puncture Proof - with dust-proof bearings, 13x6.5x6 (For models with 13x6.5x6 front tires) (Not for DuraFlex Forks) Misc. Accessories & Options - Field Installed / Cupholder, Adjustable for 200 Series / Deck Flap - V Series 48" Decks / Deck Flap - V Series 52" Decks / Deck Flap - V Series 61" Decks

15 / Discharge Control Shield, Convertible KU1174 / Engine Block Heater - 325D / / Engine Temp Sensor/Low Oil Audible Signal Kit / Filter Minder Kit for Models 325D, 329, 329B, 335 (Std on 400 Series) (Not for V Series, 321D or any Kohler engine model with dual endcap air filter canister) / Fuel Gauge, Electronic, Console-Mounted, for M1 & 225V/226V Models MidMount PowerVac Collection System Components Order # COUNTERWEIGHT REQUIRED Refer to I&I A-136 for pre-2015 Models Collectors / HT Twin Bag Catcher & Mt Kit COMBINED for 100 Ser / F Twin Bag Catcher & Mt Kit COMBINED for 100 Ser / Pusher Kit for MidMount Models / Starter Kit, Heavy Duty, for 321D, 721DT - In Lieu Of (factory installed) NET PRICED / HT Twin Bag Catcher & Mt Kit COMBINED for 226V / F Twin Bag Catcher & Mount Kit COMBINED for 226V / F Triple Bag Catcher & Mt Kit COMBINED for 226V / HT Triple Bag Catcher & Mt Kit COMBINED for 226V / Model 8HT Twin Bag Assembly w/o mount / Model 8F Twin Bag Assembly w/o mount / Model 12F Triple Bag Assembly w/o mount / Mod. 12HT Triple Bag Assembly w/o mount / Model 16 Metal Hopper w/o mount (requires exhaust ext. on 329B, 335) / Exhaust Extension for Models 329B, 335 with Mod / Full Indicator - Audible - for Model 16 Hopper Collector Mount Kits: / Mount Kit for 8HT, 8F/M1 & 12F/M1 - M1 Series / Mount Kit for Mod for 200 Series / Mount Kit for Mod. 16 for 300 & 400 Series Vac Assembly Kits: (includes set of medium lift blades) / Vac Drive M241 HD for 41" Decks / Vac Drive M248D for 124V-48 Deep Deck / Vac Drive M252D for 126V-52 Deep Deck / Vac Drive M152 for M1 52" Models / Vac Drive M161 for M1 61" Models / Vac Drive M172 for M1 72" Models / Vac Drive V52 for Model 226V-52 / Vac Drive V61 for Model 226V / Vac Drive M148 Deep Decks / Vac Housing Liner Kit - (not for M2 41) / Grass Chute for 41-inch deck Counterweight Kits / V Series (Weights and Mount Kits combined):

16 / C-WT & Mount for Model 124/124V-41 with 8F Collector / C-WT & Mount for 100/100V-48/52 with 8F Collector / C-WT & Mount for V Series with 8F Collector / C-WT & Mount for V Series with 12F Collector Counterweight Mount Kits - M1 Models (Weights sold separately): / C-Wt Mt Kit for 200/300 AC Series 61" / C-Wt Mt Kit for 72" decks / C-Wt Mt Kit for 300 & 400 Ser 61" decks Counterweight Kits - M1 Models (Mount Kit sold separately): / Counterweights: 50 lbs / Counterweights: 100 lbs / Counterweights: 150 lbs / Counterweights: 200 lbs / Counterweights: 250 lbs Model 524V Standard Features: 24 HP (724cc) B&S Commercial Turf GASOLINE V-Twin, Vertical Shaft Heavy-Duty Cyclonic Air Filtration Turf Drive Tires 20x8x10 4-gallon Fuel Tank Single-Fork Tail Wheel Design matched integrated Parker Drive System with CoolFan Low-profile belt-driven deck OPS 42-inch FoldUp Deck CoolTemp Cordura USR Seat POWER UNIT + FoldUp DECK Order # / Model 524V / 42 (42") Side-Discharge FoldUp Deck $7, V Model 526V Standard Features: 26 HP (810cc) B&S Vanguard GASOLINE V-Twin, Vertical Shaft Centrifugal Multi-Stage Air Cleaner Turf Drive Tires 20x8x10 Wide-Stance Single-Fork Tail Wheels

17 CoolTemp Cordura USR Seat with Embroidered Logo Design matched integrated Parker Drive System with CoolFan Low-profile belt-driven deck OPS 52-inch FoldUp Deck PowerFold Deck Lift/Height Adjustment 4-gallon Fuel Tank 500V Order # POWER UNIT + PowerFold DECK / Model 526V / 52 (52") Side-Discharge PowerFold Deck $8, V Series Options & Accessories MULCHING PACKAGES - DOWN DISCHARGE - Field Installed / Mulching Pkg for " DuraMax Deck / Mulching Pkg for " DuraMax Deck POWER UNIT OPTIONS / Canopy, Vinyl, for OPS / ROPS / Cupholder, Adjustable Deluxe / Light Kit - LED Worklights / Steering Lever Kit - QuikAjust Tilt Levers / Steering Levers - Extended "Big Boy" DurMax DECK OPTIONS / Roller Kit, SpeedTrim, LFC (526V/52 only) TAIL WHEEL OPTIONS - Factory Installed / Wide-Stance Single-Fork Tail Wheels, in lieu of Single- Fork Tail Wheel, for 524V/42 TAIL WHEEL OPTIONS - Field Installed / Dual-Fork Kit - One Wheel Included / Wide-Stance Single Fork Kit (includes two tires & wheels) Model 623T Standard Features: Compatible with: 23 HP (694cc) Kohler Command Pro GASOLINE V-Twin, Horizontal Shaft Heavy-Duty Dual Stage Air Filtration Turf Drive Tires, 20x10.00x8 4-gallon Fuel Tank T Drive System with CoolFan Single-Fork Tail Wheel

18 OPS 48-inch & 52-inch decks CoolTemp Cordura USR Seat Hour Meter 33 Series 48-inch Side Discharge Deck (with optional Down Discharge Mulching and PowerVac Collection) 34 Series 52-inch Side Disc Most popular configurations: POWER UNIT + POWERFOLD DECKS + PERFORMANCE PACKAGE Order ALL ( Perf. Pkg = Wide-Stance Tail Wheels and Bar Tread Drive Tires) Numbers Shown / Model 623T (48") Side-Discharge FoldUp (UWH) Deck with PowerFold & Performance Package (P. Pkg) (Includes Univ Wiring Harness) (UWH) (P. Pkg) Order ALL for order numbers) / Model 623T (52") Side Discharge FoldUp Deck with PowerFold & Performance Package (Includes Univ Wiring Harness) Model 623T - 15B PowerVac Combos Numbers Shown / Model 623T/3348 PF with Perf. Package and PowerVac 15B Lever-Actuated Hopper + (See PowerVac Chart / Model 623T/3452 PF with Perf. Package and PowerVac 15B Lever-Actuated Hopper + (See PowerVac Chart for order numbers) Order # POWER UNIT ONLY / Model 623T Power Unit (without deck) M $ COMPARE TO: Model 725KT Power Unit (without deck) 33/34 Series Side Discharge DuraMax FoldUp MOWER DECKS / / / / Model " w/ Lever Height Adjustment Model " with PowerFold Model " w/ Lever Height Adjustment Model " with PowerFold 34R Series Combo Side/Rear Discharge DuraMax Decks with PowerFold / Model 3452R - 52" Combination Side/Rear Discharge w/ PowerFold (requires Univ. Wiring Harness) / Ltd Univ Wiring Harness Two additional shields recommended with 34 Series Combination Rear Discharge Decks: and / R/3461R Series Rear Discharge Shield / Trash Shield Kit Series 623T 623 $3, $90.0 $ $77.95

19 Order # POWERFOLD OPTIONS / /4-inch (6.5 mm) Height Adjust Spacer / Armrest Control for PowerFold Height Adjust / Mt Kit - Armrest Control on Grammer Seat MULCHING PACKAGES - DOWN DISCHARGE - Field Installed / Mulching Pkg for 3348 DuraMax Deck / Mulching Pkg for 34/34R-52 DuraMax Deck DRIVE TIRE OPTIONS - Factory Installed / Performance Package (Bar Tread Drive Tires & Wide- Stance Tail Wheels) in lieu of Turf Drive Tires & Single Tail Wheel / Bar Tread Tires, 21x11x8, in lieu of Turf Tires at time of manufacture DRIVE TIRE OPTIONS - Field Installed / Bar Tread Tire / Wheel Set, 21x11x / Turf Tire Set for 620T, 20x10x / Tire Chains Set w/spacers for 20" turf tires TAIL WHEEL OPTIONS - Factory Installed / Performance Pkg (Bar Tread Drive Tires AND Wide- Stance Tail Wheels) in lieu of Turf Drive Tires & Single Tail Wheel / Wide Stance Single Fork Tail Wheels in lieu of Single Fork Tail Wheel TAIL WHEEL OPTIONS - Field Installed / Dual-Fork Kit - One Wheel Included (Requires C-WT # if replacing wide-stance tail wheels) / C-WT, 600 Series / Wide Stance Dual Fork Kit (includes 4 tires & wheels) / Wide Stance Single Fork Kit (includes two tires & wheels) / Puncture-Proof Semi-Pneumatic Tire/Wheel w/ dustproof bearings, 13x6.5x6 ea POWER UNIT OPTIONS / Canopy, Vinyl, for OPS / ROPS / C-Wt Kit - 50 lb. (requires mount kit) / C-Wt Kit lb. (requires mount kit) / Counterweight Mount Kit / Cupholder, Adjustable Deluxe / Light Kit - LED Worklights / Light Kit - Beacon Strobe (Yellow) 623T 623

20 Order # Order # SEAT KITS - Factory Installed / Premier Suspension Seat - Grammer - in leu of standard seat for 600 Series NOTE: If installing a suspension seat kit, an extended steering lever kit is also recommended. / Rocker Switch & Joystick Mount Kit on Grammer Seat SEAT KITS - Field Installed / Armrest Kit, Fold-Up / Cordura Cushion with Logo Replacement Kit For DEALER-INSTALLED Premier Suspension Seat Assembly - Grammer - order BOTH Installation Kit AND the Premier Suspension Seat Assembly / Premier Suspension Seat Installation Kit - Grammer - for 600 Series / Premier Suspension Seat Assembly - Grammer - dealer installed / Rocker Switch & Joystick Mount Kit on Grammer Seat / / / Seat Belt Extension Steering Lever Kit - QuikAjust Tilt Levers Steering Levers - Extended "Big Boy" DurMax DECK OPTIONS / Air Dam Kit Deck / Air Dam Kit Deck / Flotation Insert - Side to Side (order two) / Fork Kit - Heavy Duty for 33 Series Decks / High Mow Kit for 34 & 35 Series 52" & 61" decks / PowerFold - Dealer Installed - Height Adjust / Deck Lift Kit for 3348 Deck / PowerFold - Dealer Installed - Height Adjust / Deck Lift for 34 Series Decks (Requires Universal Wiring Harness) / Universal Wiring Harness / Roller Kit, Front Corners, for 33 Series Decks / Roller kit, Left Front, for 3452 decks / Roller Kit, SpeedTrim with side roller for 34 and 35 Series Decks (Left-Hand Corner) IMPLEMENTS & ACCESSORIES (See Counterweight Requirements) / AERA-vator, 40", Model 440 (WS Tail Wheels, Electric Lift & 100# C-WT required) / Actuator Lift for Model 440 AERA-vator Requires Universal Wiring Harness and Joystick or Rocker Switch Control / Universal Wiring Harness / Joystick Control for Actuator Lift / Rocker Switch for Actuator Lift

21 / Rocker Switch for Actuator Lift Note: AERA-vator Cart included with AERA-vators 623T 623 Order # IMPLEMENTS & ACCESSORIES (cont'd) (See C-WT Requirements) / Broom 48" - Order Fixed Mount Kit (100# C-WT and dual tail wheels required) MS $ Order # / Fixed Mount Kit for Rotary Broom Broom Accessories / Debris Deflector, 48" Broom (for Broom S/N and higher with square corners) / Gage Wheel Kit - Broom / Jack Kit for Fixed Angle Brooms / Stand for fixed mount brooms with gage-wheel kit / Dethatcher - 46" (1.15 m) "Little Bully" Dozer Blades / Dozer Blade, 48" (122 cm) bidirectional Model 480 (50# C-WT required) / Foot-Controlled Angling Kit for Models 480 & 482 Dozer Blades / Dozer Blade, 48" (122 cm) PowerBlade, hydraulic angling & lift (50# C-WT required) PowerBlade requires Joystick Control & Univ. Wire Harness: / Joystick Control for Snow Performance Package, Bi- Directional Brooms, Turbine Blowers & PowerBlades / Universal Wiring Harness / Edger, Edge-Eze, with electric lift for Side Discharge Decks Only - Right Side Mount / Edger, Edge-Eze, with electric lift for Rear Discharge Decks Only - Right Side Mount / Edger, Edge-Eze, with electric lift for Side, Mulching or Rear Discharge Decks - Left Side Mount Note: If installing Edger, Edge-Eze on a unit that has Univ. Wire Harness, order adapter kit no / Edge-Eze Wiring Harness Adapter / Remote Vac (Wand Vac Kit & Vac Assembly) Requires Collector Order # Shielded Sprayers - Add Special Shipping Cost of $ / Shielded Sprayer, 30 gal., 3 section, 133" (3.4 m) / Shielded Sprayer, 30 gal., 1 section, 53" (1.35 m) / Shielded Sprayer, 30 gal., 1 section, 53" (1.35 m), Economizer (not expandable) / Spray Wand, 25 ft. coil & mount kit for & sprayers

22 T Order # / Spray Wand, 25 ft. coil & mount kit for Economizer / Auxilliary Pump for fertilizer applications IMPLEMENTS & ACCESSORIES (cont'd) (See C-WT Requirements) DriftBuster Snowthrowers: Order base model plus desired Spout and Lift Kit Consult with Grasshopper Company to retrofit prior-year snowthowers / Snowthrower, 48", Model 412 BASE MODEL (50# C- required.) Requires a Spout & Lift Kit / Manual Spout & Manual Lift Kit - Snowthrower / Electric Spout Rotation & Manual Lift - Snowthrower / Manual Spout & Electric Lift - Snowthrower 600 $1, / Snow Performance Package: Electric Spout Rotation $1,040.0 Joystick Control Series (for Mod 412 with S/N & above) (Requires Universal Wiring Harness) / Universal Wiring Harness $90. / Skid Wheel Kit for Snowthrower $ / Tire Chains Set w/spacers for 20" turf tires 445 Model 725KT Standard Features: Compatible with: 25 HP (747cc) Kohler Command Pro with Oil Sentry GASOLINE V-Twin, Horizontal Shaft HD Dual Stage Air Filtration T2 Drive System with CoolFan 7.2-gallon Fuel Tank Bar Tread Tires 22x11.00x10 Single-Fork Tail Wheel ROPS CoolTemp Cordura USR Seat 52-, 61 & 72-inch Decks Limited Universal Wire Harness QuikAjust Tilt Steering Levers 34 Series 52-, 61- and 72-inch Side Discharge decks (with optional Down Discharge Mulching and PowerVac Collection) 35 Series 52-, 36 Series 61-inch Side Discharge deck (with optional Down Discharge Mulching and PowerVac Collection) 37 Series 61-inch Dedicated Most popular POWER UNIT + POWERFOLD DECKS

23 configurations: + WIDE-STANCE TAIL WHEELS Order ALL Numbers Shown (At least two (2) tail wheels required with 72-inch deck) MSR / Model 725KT (52") Side-Discharge FoldUp (WS) Deck with PowerFold and Wide Stance Single Fork Tail Wheels / Model 725KT (52") Dedicated Rear Discharge (WS) FoldUp Deck with PowerFold and Wide Stance (Shield) Single Fork Tail Wheels (Includes Trash Shield Kit) / Model 725KT (61") Side-Discharge FoldUp (WS) Deck with PowerFold and Wide Stance Single Fork Tail (C-WT) Wheels (C-WT) (Includes 50# C-WT) / Model 725KT R (61") FoldUp Deck (WS) (Dedicated Rear Discharge) with PowerFold and Wide (C-WT) Stance Single Fork Tail Wheels (C-WT) (Includes 50# C-WT and Trash Shield Kit) (Shield) / Model 725KT (61") Side-Discharge FoldUp (WS) Deck with PowerFold and Wide Stance Single Fork Tail (C-WT) Wheels (C-WT) (Includes 50# C-WT) / Model 725KT (72") Side-Discharge FoldUp (C-WT) Deck with PowerFold and Wide Stance Single Fork Tail (C-WT) Wheels (Includes 100# C-WT) (WS) / Model 725KT (72") FoldUp Deck (C-WT) (Dedicated Rear Discharge) with (C-WT) PowerFold and Wide Stance Single Fork Tail Wheels (WS) (Includes 100# C-WT and Trash Shield Kit) (Shield) $12, $13, $13, $13, $13, $13, $14, KT Order ALL Numbers Shown Model 725KT - 15B PowerVac Combos / Model 725KT/3452 PF with Wide-Stance Single-Fork (WS) Tail Wheels and PowerVac 15B Lever-Actuated + (See PowerVac Hopper Chart for 15B order numbers)

24 (WS) + (See PowerVac Chart for 15B order numbers) (WS) + (See PowerVac Chart for 15B order numbers) / / / / / / / Model " w/ Lever Height Adjustment Model " with PowerFold Model " w/ Lever Height Adjust Model " with PowerFold Model " with PowerFold 725KT Model 725KT/3461 PF with Wide-Stance Single-Fork Tail Wheels and PowerVac 15B Lever-Actuated Hopper (NOTE: C-WT must be added if collector is removed) Model 725KT/3472 PF with Wide-Stance Single-Fork Tail Wheels and PowerVac 15B Lever-Actuated Hopper (NOTE: C-WT must be added if collector is removed) POWER UNIT ONLY / Model 725KT Power Unit (without deck) Note: At least two (2) tail wheels are required with 72-inch deck COMPARE TO: Model 729BT Power Unit (without deck) 34 Series Side Discharge (3-in-1) DuraMax FoldUp Mower Decks MSR Mulching Packages and PowerVac Systems sold separately 34R Series Combo Side/Rear Discharge DuraMax Decks w/ PowerFold / Model 3452R - 52" Combination Side/Rear Discharge w/ PowerFold / Model 3461R - 61" Combination Side/Rear Discharge w/ PowerFold Two trash shields are recommended with 3452R & 3461R Decks: and / R/3461R Series Rear Discharge Shield / Trash Shield Kit Series / Model 3472R 72" Combination Side/Rear Discharge with PowerFold * * Two trash shields are recommended with 3472R deck: and / R Rear Discharge Trash Shield / Trash Shield Kit Series MSR $3, $3, $ $68.75 Dedicated Rear Discharge DuraMax Decks with PowerFold / Mod " Dedicated RD w/ PowerFold $3, / Mod " Dedicated RD w/ PowerFold $3, / Mod " Dedicated RD w/ PowerFold $4, / #VALUE! Mod " Dedicated RD w/ PowerFold $3,925 Additional trash shield recommended with Dedicated RD decks: # / Trash Shield Kit Series $68.7 COUNTERWEIGHT REQUIRED WITH 61- & 72-INCH DECKS (IF POWERVAC SYSTEM IS NOT INSTALLED) DURAMAX DECKS continued 36 Series Side Discharge (3-in-1) DuraMax FoldUp Mower Decks

25 Mulching Packages and PowerVac Systems sold separately / Model " with PowerFold, Splined PTO Shaft $3, and 11x4x5 Tires COUNTERWEIGHT REQUIRED WITH 61- & 72-INCH DECKS (IF POWERVAC SYSTEM IS NOT INSTALLED) Order # POWERFOLD OPTIONS / /4-inch (6.5 mm) Height Adjust Spacer $ / Armrest Control for PowerFold Height Adjust. $ / Mt Kit - Armrest Control on Grammer Seat $15.00 COUNTERWEIGHT KITS / C-Wt Kit - 50 lb. (requires mount kit) $ / C-Wt Kit lb. (requires mount kit) $ / Counterweight Mount Kit $65.00 MULCHING PACKAGES - DOWN DISCHARGE - Field Installed / Mulching Pkg for 34/34R-52 DuraMax Deck / Mulching Pkg for 34/36-61 DuraMax Deck / Mulching Pkg for 34/34R-72 DuraMax Decks DRIVE TIRE OPTIONS - Factory Installed / Tires / Wheels, 22" Turf in lieu of LP for T / T6 Models (Not used with tire chains) / Tires / Wheels, 20" Turf in lieu of LP for T / T6 Models - Use with Tire Chains DRIVE TIRE OPTIONS - Field Installed / Turf Tire & Wheel Set for T / T6 models - 20x10x10 (Can use with Tire Chains) / Turf Tire & Wheel Set for T / T6 models - 22x10x10 (not used w/ tire chains) / Tire Chains Set w/spacers for 20" turf tires TAIL WHEEL OPTIONS - Factory Installed / Wide Stance Single Fork Tail Wheels in lieu of Single Fork Tail Wheel TAIL WHEEL OPTIONS - Field Installed / Dual Fork Kit - One Wheel Included / Wide Stance Dual Fork Kit (includes 4 tires & wheels) / Wide Stance Single Fork Kit (includes two tires & wheels) / Puncture Proof Semi-Pneumatic Tire/Wheel w/ dustproof bearings, 13x6.5x6 each: POWER UNIT OPTIONS / Canopy, Aluminum, for ROPS / Canopy, Vinyl, for OPS / ROPS / Cupholder, Adjustable Deluxe $0.00 $0.00 $ $ $ $ $ $ $ $ $ $ $12.00 $ $ $235.00

26 Order # POWER UNIT OPTIONS (continued) All Hydraulic Lift Kits include Universal Wiring Harness Order Deck Latch Kit if PowerFold is no / Hydraulic Deck Lift - T / T6 Series / Kohler models, $1, Factory Installed, switch in lever, includes 50 lbs c-wt & Univ. Wiring Harness / Latch Kit for 33 / 34 Series decks - required when $10.50 hydraulic lift used with non-powerfold deck / "Tall Boy" Steering Lever Kit - QuikAjust Tilt Levers - $ with Hydraulic Switch in right lever / Light Kit - LED Worklights / Light Kit - Beacon Strobe (Yellow) (mounts on ROPS) (Accessory fuse must be available) / ROPS & Seatbelt, Foldable, in lieu of standard ROPS for 700/900 Series at time of manufacture / ROPS, Foldable, dealer installed kit, for 700/900 Series with serial no & above $ $ / Steering Lever Kit - QuikAjust Tilt Levers $ / Steering Lever Kit - QuikAjust Tilt Levers with Hydraulic $ Switch in right lever / Steering Lever Kit - QuikAjust Tilt Levers - "Tall Boy" 2- $ inches taller than standard / Steering Lever Kit - QuikAjust Tilt Levers - "Tall Boy" $ with Hydraulic Switch in right lever / Steering Lever Kit - "Tall Boy" 2-in. taller $65.00 SEAT KITS - Factory Installed / Premier Suspension Seat - Grammer - in lieu of $ standard USR seat for 700 Ser AC models / Rocker Switch & Joystick Mount Kit on Grammer Seat $15.00 Suspension Seat Kits: Consider ordering a "Tall Boy" Steering Lever Kit when ins Suspension Seat Kit. SEAT KITS - Field Installed / Armrest Kit, Fold-Up $ / Seat back cushion, Cordura with embroidered $ Grasshopper logo / Seat Belt Extension (additional 8 inches) $ / "Big Boy" Wide Seat Conversion Kit with fold-up $ armrests (not for Grammer seats) (Includes seat belt extension) $ $180.00

27 SUSPENSION SEATS - Field Installed For DEALER-INSTALLED Premier Suspension Seat Assembly - Grammer - order BOTH the Seat Installation Kit AND the Premier Su Assembly / Premier Suspension Seat Installation Kit - Grammer - dealer installed for 700 Series / Premier Suspension Seat Assembly - Grammer - dealer installed / Rocker Switch & Joystick Mount Kit on Grammer Seat $15.00 Order # Duramax DECK OPTIONS / Air Dam Kit Deck $ / Air Dam Kit Deck $ / Air Dam Kit / 9772 $ / Flotation Insert - Side to Side (order two) $ / High Mow Kit for 34 & 35 Series 52" & 61" decks $ / High Mow Kit for 34 & 35 Series 72" Decks $ / PowerFold - Dealer Installed - Height Adjust / Deck Lift $ Kit for 34 Series Decks ROLLER KITS - Field Installed / Roller kit, Left Front, for 3452 decks $ / Roller Kit, SpeedTrim with side roller for 34 and 35 $ Series Decks (Left-Hand Corner) / Roller Kit, SpeedTrim with side roller for Right- $90.00 Hand Corner of 35 Series Decks IMPLEMENTS & ACCESSORIES (See Counterweight Requirements) / AERA-vator, 40", Model 440 $4, (50# C-WT required; and Electric Lift or Hydraulic Lift Adapter on power units with hydraulic lift) / Hydraulic Lift Adapter for AERA-vator 440 for units $ equipped with hydraulic lift / Actuator Lift - (Requires Joystick or Rocker Switch) $ $ $ / Joystick Control for Actuator Lift $ / Rocker Switch for Actuator Lift $ / AERA-vator, 60", Model 660 (only for units with 2 or 4 $6, tail wheels and equipped with hydraulic lift) 100# C-WT required Note: AERA-vator Cart included with AERA-vators ZeroTurn Turbine Blower - Add Special Shipping Cost of $310 / $5, Blower, ZeroTurn, Turbine, 9000 cfm Must order rocker switch or joystick control, or reuse existing controls from other equipment / Rocker Switch Directional Control (can be used with $ Pro Model Dozer Blades, Turbine Blowers and Snowthrowers with Electric Lift / Manual Spout Rotation / Joystick Control for Snow Perf. Package, Bi- $ Di Brooms, Turbine Blowers & PowerBlades / Broom 48" - Order Fixed or Bi-Directional Mt Kit / Broom 60" - Order Fixed or Bi-Directional Mt Kit $1, $2,125.00