Hilco. Industrial. A Hilco Global Company Vested in Your Success

Transcription

1 ONLINE AUCTION Cincinnati Milacron Twin & Single Screw Extruders with Downstream Equipment, Also Featuring Unused AST Drying System, Material Delivery Systems, Product Dies, Raw Material & More Real Estate Available through Private Negotiations Online Bidding Opens: Wednesday, November 4 th Online Bidding Closes: Wednesday, November 11 th Veblen, South Dakota Hilco Industrial A Hilco Global Company Vested in Your Success

2 HilcoTM ONLINE BIDDING OPENS WEDNESDAY, NOVEMBER 4 TH BEGINNING AT 10AM LOCAL TIME ONLINE BIDDING CLOSES WEDNESDAY, NOVEMBER 11 TH CHeCk For ClosInG times PREVIEw BY APPOINTMENT ONLY to schedule An InspeCtIon, please ContACt JoHn magnuson At or JmAGnUson@HIlCoGloBAl.Com ASSET LOCATION 401 S. MAIN ST. VEBLEN, SD Industrial ONLINE AUCTION DIRECTIONS FROM FARGO, ND AIRPORT: TRAVEL SOUTH ON I-29 FOR APPROX. 73 MILES AND CROSS INTO SOUTH DAKOTA. EXIT I-29 AT SD-127 (EXIT #246) AND TURN RIGHT (WEST) ONTO SD SD-127 BECOMES SD-106; TRAVEL 12 MILES ON SD-106 AS SD-106 CURVES TO THE RIGHT AND BECOMES SD-25. TRAVEL ONE MILE THROUGH CLAIRE CITY AND TURN LEFT ON SD-25 WESTBOUND. CONTINUE WEST ON SD-25 FOR NINE MILES TO MAIN ST. TURN LEFT ONTO MAIN STREET AND TRAVEL TO PLANT AT END OF STREET. FURTHER INFORMATION A 16% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENT IS MADE BY MEANS OF CASH, CASHIER S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENT IS MADE BY CREDIT CARD (ACCEPTED FOR INVOICES OF $2000 OR LESS), OR WHEN PAYMENT IS RECEIVED AFTER 48 HOURS OF SALE CLOSE. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY. REMOVAL DEADLINE IS FRIDAY, DECEMBER 4 TH WITH HOURS OF REMOVAL BETWEEN 8AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY. MACHINERY & EQUIPMENT JOHN MAGNUSON JMAGNUSON@HILCOGLOBAL.COM PAYMENT INFORMATION LESIA JOSEPH LJOSEPH@HILCOGLOBAL.COM HILCO ACCOUNTS RECEIVABLE AT AR-GR@HILCOGLOBAL.COM CUSTOMER SERVICE HILCO INFO@HILCOIND.COM Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at for any changes to date, sale process, terms and conditions and list of available assets. EXTRUDERS EXTRUDERS 2 CINCINNATI MILACRON MODEL TC86 CONICAL TWIN SCREW EXTRUDERS, S/Ns E67A , E67A (Both 2003), Counter Rotating, Screw Diameter 3.38" (Front) / 6.9" (Rear), Four Barrel Heating Zones, Four Barrel Cooling Zones, Eight Die Heating Zones, Screw Temperature Controller, Gear Box, Ratio 53-1, Reliance Electric 125 HP AC Motor, Reliance Electric GV 3000/SE Drive Control, Zone Controllers, AEC Whitlock #AF-1 Precision Series Additive Feeder & Control, Crammer Feeder Hopper 2 CINCINNATI MILACRON MODEL E80 CONICAL TWIN SCREW EXTRUDERS, S/N E54A & E54A (Both 2000), Screw Diameter 3.14" (Front) / 6.13" (Rear), Four Barrel Heating Zones, Three Barrel Cooling Zones, Eight Die Heating Zones, 75 HP Reliance Electric AC Motor, Reliance Electric GV 3000/SE Drive Control, AEC Whitlock #AF-1 Precision Series Additive Feeder & Control, Crammer Feeder Hopper 2003 Register and Bid Online Only at hilcoind.com/premiumcomposites 2 To schedule an auction, please call Hilco Industrial at HILCO (44526)

3 EXTRUDERS 2003 EXTRUDERS, continued 1 CINCINNATI MILACRON MODEL CM80 HP CONICAL TWIN SCREW EXTRUDER, S/N E54A (1998), Screw Diameter 3.14" (Front) / 6.13" (Rear), Screw Design H M, Four Barrel Heating Zones, Three Barrel Cooling Zones, Eight Die Heating Zones, 75 HP Pacific Scientific Brushless DC Motor, Pacific Scientific Brushless 3000 Drive Control, AEC Whitlock #AF-1 Precision Series Additive Feeder & Control, Crammer Feeder Hopper 1 AKRON MILACRON MODEL S-PAK 175 SINGLE SCREW EXTRUDER, S/N X54A (2005), Screw Diameter 1.75", L/D Ratio 24:1, 3 Heating/Cooling Zones, 1 Die Zone, Akron Milacron Hopper, Colortronic #C150DD Additive Feeder Control, Reliance Electric 15 HP Motor 1 AKRON MILACRON MODEL S-PAK 150 SINGLE SCREW EXTRUDER, S/N X53A (2005), Screw Diameter 1.5", L/D Ratio 24:1, 3 Heating/Cooling Zones, 1 Die Zone, Hopper, Colortronic Additive Feeder Control, Reliance Electric 10 HP Motor 1 AKRON MILACRON MODEL T-PAK 150 SINGLE SCREW TILT MOUNT EXTRUDER, S/N X43A (2002), Screw Diameter 1.50", L/D Ratio 24:1, 3 Heating/Cooling Zones, 1 Die Zone, Akron Milacron Hopper, Reliance Electric 10 HP Motor QUANTITY OF REPLACEMENT PARTS: Replacement Screws for Cincinnati Milacron #80 & #86 Twin Screw Extruders, Replacement Barrel for Size 80 Twin Screw Extruder, Spare Heater Bands for Extruder For more information, please visit us on the web at hilcoind.com/premiumcomposites 3

4 DOWNSTREAM EQUIPMENT 1 SILVER MODEL SF4015A GROOVING MACHINE, S/N C (2002), Workpiece Dimension Width mm / Thickness mm, Feed Speed 6-24 meters/min, Cutter Shafts Diameter 40 mm, Power Adjustment Up Spindle / Left Spindle / Right Spindle / Down Spindle, Infeed Table, SM Vector Lenze AC Tech Controls 1 WEINIG TYPE P26S PROFIMAT FORTEC GROOVING MACHINE, Machine # (2004), Infeed Table, Left & Right Spindle Axial & Radial Adjustments, Top & Bottom Axial & Radial Adjustments, 1,705.4 Hours 5 CONAIR MODEL METAPLAST MST-6 TRAVELING CUT-OFF SAWS, S/Ns , , , , 97092, Pneumatic Hold Down & Vacuum, Encoder & Length Control; Additional Sharpened Saw Blades 2 CONAIR MODEL MSBHI ' LONG X 12" WIDE COOLING TROUGHS, S/Ns , , Baldor 7.5 & 15 HP Motor, G&L #SSH Pump 4 CONAIR MODEL METAPLAST MSB-C ' LONG X 8" WIDE COOLING TROUGHS, S/Ns ,100679, , 97096; 7.5 & 15 HP Motor & Gould #SSH Pump 1 CONAIR MODEL MCB ' LONG X 8" WIDE COOLING TROUGH, S/N CONAIR MODEL MSBHI ' LONG X 12" WIDE COOLING TROUGHS, S/Ns , , MSBHI Control, Flat Plate Heat Exchangers, Two MLI Turbo Disc Filter 1 CONAIR MODEL PP " LONG X 8" WIDE CATAPULLER, S/N 2183 /829478, Gatto Speed COM1000 Computer 4 CONAIR MODEL DT20-12HD 20' LONG X 12" WIDE STAINLESS STEEL DUMP TABLES, S/Ns MPM , MPM , & N/A 1 CONAIR MODEL DT ' LONG X 12" WIDE STAINLESS STEEL DUMP TABLE, S/N ROLLER TYPE EMBOSSER, Embossing Roll 13 Wide, Between Posts 20 7/8", Contrex Speed Control; Temptek #VTD-2100C Temperature Controller, S/N (2000), Temperature Range F 1 ESI ROLLER TYPE EMBOSSER, Embossing Roll 8 Wide, Between Posts 12", Contrex Speed Control; Thermolator Temperature Controller DOWNSTREAM EQUIPMENT 2004 Partial Listing Only, Please Visit Our Website hilcoind.com For Complete Lot Catalog 4 To schedule an auction, please call Hilco Industrial at HILCO (44526)

5 AIR SWEPT TUBULAR DRYING SYSTEM PELLET MILL STORAGE SILOS PELLET MILL 1 CALIFORNIA PELLET MILL TYPE PELLETIZER, S/N /5342/1044 (2002), Die OD Approx. 23 1/2", Die ID Approx. 16 1/2", Siemens 100 HP High Efficiency Motor (460 Volts), Input Max 55 KW 1,500 RPM, Auger Drive 1.73 KW Diameter Approx. 7-1/2", Auger Drive 1.58 kw Motor MATERIAL STORAGE SILOS 1 STOR-KING MATERIAL STORAGE BIN, Holding Bin for Dry Wood Flour, Approx. Size 10' D x 18' H, Two Sets Low & High Level Sensors, Carman Discharge Shaker, () New Blast Doors & Interior Sandblasted 1 IMPERIAL MODEL OX ,297 CU. FT. CAPACITY BULK STORAGE SILO, S/N I (2000), O/A Height 30', Max Density 40 Lbs/Cu. Ft., Pressure (psi) 0.38, Max PSI Vac 0.03, Max Weight Ton, Temp Ambient 1 FRIESEN MATERIAL STORAGE SILO, S/N 20381, Approx. Dimensions 14' 6" D x 55' H, Laidig #4345 Sweep Auger Unloader, S/N SN , 7.5 HP Motor & Hydraulic Pump 1 MERIDIAN MODEL 1425CE MATERIAL STORAGE SILO, S/N W08280, O/A Height 33', Approx. Diameter 14'; Flat Surface 25' H + Cone 7' H 1 MERIDIAN MODEL FR1630 MATERIAL STORAGE SILO, S/N 10169W, Approx. Dimensions 16' D x 38' H; Flat Surface 30 H + Cone 8 H 2 APPROX. 6' D X 18' H MATERIAL STORAGE SILOS, Manual Knife Gate (Fairway White Material) AIR SWEPT TUBULAR DRYING SYSTEM 1 SCOTT EQUIPMENT CO. MODEL 3612 AIR SWEPT TUBULAR AIR DRYER (), Capable of up to 6,000 PPH Drying Wood Flour from 10% to 1%, AST Dryer Cylindrical Housing 36" Diameter x 12' Long, Toshiba 100 HP Drive, Burner Box Model #AST4214, S/N D, Eclipse #TA0400 Therm Air Burner, Exhaust Fan rated for 8,500 SCFM, Reverse Jet Baghouse, Rotary Airlock 14" x 14", Gas Burner System, Dryer Control System with Allen Bradley Panelview Plus 1000 Interface, Flamex Spark Detection & Suppression System, NOTE: Line Installed and Never Used 1 MAC PROCESS REVERSE JET BAGHOUSE (), O/A Height 43' 9", High/Low #RA-H Roto-Bin-Dicators, 5 HP Blower with #32 U-RAI Pump, Roots # M, S/N , Schenck Airlock, Twin City Fan & Blower Size 330W, Type BCN-SW Blower, 50 HP, S/N , Unit Installed and Never Used 1 WOOD FLOUR UNLOADER, HOLDING STATION WITH TWO (2) AUGER CONVEYORS, Bunting Magnetics Steel Detection Unit, Carolina Conveyors Inc 24" RVS 5 HP Rotary Valve, Specialty Assembly Products 60 HP Dura Flow Positive Displacement Blower, #GCDEACA, S/N S For more information, please visit us on the web at hilcoind.com/premiumcomposites 5

6 BLENDING SYSTEMS GRANULATORS RECLAIM SYSTEM DELIVERY & PROCESSING SYSTEMS BLENDING SYSTEMS 1 AEF HDPE & PVC DUAL PROCESS BLENDING SYSTEM, System A (HDPE): Five (5) AEF Filter Receivers with Pneumatic Lock Sizes 24" D x 6' H & 30" D x 6' H, Five Colortronic Blenders (two with Graviblend Agitator), System B (PVC): Four AEF Filter Receivers with Pneumatic Lock Sizes 24" D x 6' H, 24" D x 6' 6" H & 30" D x 7' H, Four Colortronic Blenders (one with Graviblend Agitator), (2) AEF Holding Bins for Finished Product Approx. Dimensions 56" D x 9' H, Each with Bliss Ind. Horizontal Auger, Both Systems Controlled by Allen Bradley PanelView Plus 1000 Terminal, AEC Retrofit of Accumeter #277684Q Continuous Loss-In-Weight Feed System () 1 AEP BLENDING SYSTEM, Includes Aqua Poly Storage Hopper Approx. 24" D x 6' H, Bunting Magnetics Metal Detection Unit, Aqua Poly Mixing Hopper (Approx. Dimensions 4' D x 4' H) with Ensign Equipment # Vertical Ribbon Mixer, S/N 5064, WAM Exhaust Fan, Aqua Poly High & Low Sensor GRANULATORS 1 AEC MODEL GP " X 20" GRANULATOR, S/N CA083000A (2000), Teco Westinghouse 40 HP Motor, Sterling #6075FD Blower, S/N (2008), 7.5 HP Motor, Spare Blades 1 CUMBERLAND MODEL 16 X 16 GRANULATOR, S/N R (2000), Lincoln 20 HP Motor, Sterling #6005FD Blower, S/N (2008), 5 HP Motor, Spare Blades 1 RAMCO 10" X 12" GRANULATOR, 10 HP Motor DELIVERY & PROCESSING SYSTEMS 6 AEF EXTRUSION LINE DELIVERY SYSTEMS, AEF Filter Receiver Silo Approx. Dimensions 30" D x 66" H, Bindicator Low Level Sensor, AEF Surge Hopper Approx. Dimensions 48" D x 10' H, FNW Pneumatic Knife Gate 1 AEF HOPPER, Hopper Approx. Dimensions 60" D x 8' H, Upper Filter Receiver with Air Lock, Industrial Magnetics Steel Sensor, Part #EX0808CEZ, ID #C (2000), Salina Vortex #SA10-RS Pneumatic Knife Gate, S/N (2009) 1 CONAIR MODEL CH54 APPROX. 114 CU. FT. CAPACITY DRYER HOPPER, S/N (2007), Hopper Approx. Size 54" D x 13' H, Blower Motor 7.5 HP, Conair #HB2000 Hot Air Dryer, S/N , Filter Receiver Dimension Approx. 39" D x 6' H RECLAIM SYSTEM 1 RECLAIM UNIT, Includes: AEC #MV1012 Granulator, S/N 05G06275, 10 HP, 2 HP Blower, Kongskilde #RF40 Rotary Valve, S/N (2005), Cyclone Unit (Approx. Dimensions 36" D x 8' H) with Eight (8) Filters To schedule an auction, please call Hilco Industrial at HILCO (44526)

7 DIES & TOOLING DIES & TOOLING 1 CAPPED & NON-CAPPED PRODUCT TOOLING, Includes: 8 1/2" & 12" Fascia, Fascia Molding, (3) EED Board PVC Solid & Grooved, Regular & Capped, ESD Capped, 2 x 4 Die, ESD Board & Additional Plates 1 HD EXTREME RAIL TOOLING, For Hand Railing, Baluster, Bottom & Top Rails, Retainer Posts 1 PVC RAILING TOOLING, Top & Bottom Hand Rails, Includes Two Dies QUANTITY OF MISCELLANEOUS TOOLING, Including: (12) Embossing Rolls from 8" Wide to 17" Wide, (2) Extruder Adaptors, (1) 4" PVC Post Die, (2) Misc PVC Dies, (2) Misc Injection Mold Dies, Assorted Plates For more information, please visit us on the web at hilcoind.com/premiumcomposites 7

8 BLOWERS TENSILE TESTER PORTABLE BUILDING ROLLING STOCK SPECIALTY ASSEMBLY POSITIVE DISPLACEMENT BLOWERS 8 15 HP WITH SUTORBILT VACUUM PUMP BLOWERS, S/Ns S059834, S060520, S142120, S142291, S & N/A, Max RPM HP WITH SUTORBILT VACUUM PUMP BLOWERS, S/Ns S138614, S282061, S142150, Max RPM HP WITH ROOTS #56U-RAI BLOWER, S/N , Part # L TENSILE TESTER 1 MTS MODEL INSIGHT 30 TENSILE TESTER, S/N 30104, MTS Pendant S/N OE (2005), MTS Testworks 4 Disks, MTS Load Cell # , S/N , Cap 30 kn, HP Compac Computer, HP Laser Jet P2015DN Printer PORTABLE BUILDING 1 HI QUAD MFG APPROX. 38' X 100' X 19' H PORTABLE STORAGE BUILDING, Door Opening 15' Wide, (1) Doorway, Steel Tubular Supports every 5' ROLLING STOCK 1 CASE MODEL 95XT 3,000 LB CAPACITY SKID STEER LOADER, S/N JAF , Diesel Engine, 48 Fork Attachment & Bucket Attachment, Enclosed Cab 1 INGERSOLL RAND MODEL RT706G 6,000 LB. CAPACITY ALL TERRAIN FORKLIFT TRUCK, S/N SBF, 4-Speed, Automatic Transmission, 76 HP Cummins Diesel Engine, Engine S/N ; Max Lift Approx. 13', 3-Stage Mast, Side Shift, Removable Wide Fork Support 42" x 128", Pneumatic Yard Tires, Front Tilt Approx MITSUBISHI MODEL FG25 5,500 LB. CAPACITY FORKLIFT TRUCK, S/N AF17B05621, LPG Type, Max Lift 131", 2-Stage Mast, Side Shift, Fork Positioner, Forks 42", Pneumatic Tires 1 CLARK MODEL CGP30 5,500 LB. CAPACITY FORKLIFT TRUCK, S/N P365LI OFB, LPG Type, Max Lift 189", 3-Stage Mast, Side Shift, Forks 42", O/A Height 87", Pneumatic Tires 1 ALLIS CHALMERS MODEL ACC40K 3,500 LB. CAPACITY FORKLIFT TRUCK, S/N AK , LPG Type, Max Lift 156", 2-Stage Mast 1 CART CADDY MODEL 5W ELECTRIC TUGGER, S/N , Nominal Power 1 HP / 2 HP Peak, Max Draw Bar Pull 550 Lbs, Max Configuration 656 Lbs 1 DODGE MODEL LARAMIE SLT PICKUP TRUCK, VIN 3B7MF33D1VM (1997), Dual Rear Tires, Extended Cab, 183,068 Miles on Odometer, Automatic Transmission, 2H / 4H / 4L, Intercooled Cummins Turbo Diesel Engine, GVWR 11,000 Lbs 1 ABU TRAILERS GOOSENECK TRAILER, VIN 4UGFG32329D (2009), Trailer Width 8' 6" x Length 25', 5' Dovetail, GVWR 21,000 Lbs, Tires Str 235/80R16 1 PAIR OF 74" X 6" EXTENDED FORKS FOR FORKLIFT TRUCK, Inner Height 1-1/2" 8 To schedule an auction, please call Hilco Industrial at HILCO (44526)

9 INVENTORY PLANT UTILITIES MACHINE SHOP & PLANT SUPPORT RAW MATERIAL INVENTORY & REGRIND LARGE QUANTITY OF HD COLORS FROM NPC Over 4,600 Lbs; PVC Colors from Polyone, Americhem, Aurora Plastics & Deceuninck over 17,000 Lbs; HDPE Concentrate from Struktol 6,400 Lbs; Lube Pellets & Lube from Struktol over 10,000 Lbs; PVC Pellets from Polymera 33,000 Lbs; Polyone E4000 Geon Natura PVC Virgin Over 10,000 Lbs; PVC Cap from Viking Polymers 4,800 Lbs; Large Quantity Regrind Material & PVC Over 350,000 Lbs 2013 PLANT UTILITIES 1 TRANE MODEL RTWA1004XE01C3COWF 100 TON CAPACITY WATER CHILLER SYSTEM, S/N U , Two Compressors, Trane Adaptive Control, Type Use: Indoor, Design Pressure 450 High Side / 300 Low Side; BAC #F1463-P Cooling Tower, S/N U MAD 1 ALLEN BRADLEY CAT # SN K CGYS61/1 HORIZ POWER 800 AMP / VERT POWER 300 AMP MOTOR CONTROL CENTER, Bus Rating 600 VAC Max, 3 Ph, Series M 1 SANBORN MODEL SLA AIR COMPRESSOR, S/N G A, 30 Gallon Tank, AO Smith Motor, Running HP 1.9, 120 Volt, PSI / PSI 1 ATLAS COPCO GA HP AIR COMPRESSOR, S/N AIF (2003), Max Working Pressure 132 PSIG 1 INGERSOLL RAND MODEL PAC-AIR 75, 75 HP AIR COMPRESSOR 1 LE ROI MODEL B HP AIR COMPRESSOR, S/N 4045x15, Air Cooled 1 STYLAIR SRD-6212 AIR DRYER, S/N , Rated Air Flow PSIG, 100 F 1 SILVAN INDUSTRIES NO. D GALLON AIR RECEIVER TANK, S/N T (2003), Approx. Size 36" D x 80" H, MAWP , MDMT PSI GALLON CAPACITY AIR RECEIVER TANK, Approx. Dimensions 30" D x 72" H, MAWP F 1 KARGARD INDUSTRIES 240 GALLON CAPACITY AIR RECEIVER TANK, Approx. Dimensions 30" D x 72" H 1 AEF DUST COLLECTOR, APPROX. DIMENSION 34" D X 10' H, NY BLOWER CO 7.5 HP BLOWER, Premier Pneumatics # HDRFS-98-8NHRTT3 Airlock, S/N PROPANE TANK FILLING STATION Register and Bid Online Only at hilcoind.com/premiumcomposites MACHINE SHOP & PLANT SUPPORT 1 MTD MODEL YARD MAN 46" RIDING LAWN MOWER (2013), Hydrostatic, 56.6 Hours, Headlights, Six (6) Height Adjustment Settings, Kohler Courage 22 HP Engine, 597 CC, Engine S/N BRIGGS & STRATTON MODEL POWER- FLOW TECHNOLOGY 3,000 PSI PRESSURE WASHER, S/N , Briggs & Stratton 190cc, 875 Series Gasoline Engine, S/N , Wand 1 MODEL TON CAPACITY ENGINE CRANE, 4-Position Boom, Adjustable Front & Rear Legs 1 WS TYLER MODEL RX-29 8" TEST SIEVE SHAK- ER, S/N 21907, Sieves: #20 S/N , #40 S/N , #60 S/N , #60 S/N , #100 S/N , #120 S/N REMINGTON MODEL HH-215T-KFA 215,000 BTU KEROSENE TYPE HEATER, Thermostat Control 40 to 110, Fuel Consumption/Hour 1.63, Fuel Tank 13 Gallon, Fuel Oil No. 1 Kerosene 2 DEWALT MODEL DW715 12" COMPOUND MITRE SAWS, S/Ns , (To 2012), Head Tilt 0 to 45, Base Swivels 0 to 50", 120 Volt, 15 Amp, Roller Conveyor 1 JET MODEL JDP-17MF DRILL PRESS, S/N , Table 13 1/2" Diameter, 3/4 HP Motor 1 THERMADYNE MODEL THERMAL ARC FABRI- CATOR 210 WELDER, S/N M , Amp, Weld Gun Attachment 1 PPE MODEL DT2000VB 2,000 LB CAPACITY PNEUMATIC BOX TILTER, S/N BT2000VB , Platform 44" x 44" QUANTITY OF SUPPORT EQUIPMENT, Including: Self Dumping Hoppers to 5 Cu. Yd. Capacity, Saws, Welders, Grinders, Shop Press, Calipers, Tap & Die Sets, Conduit Bender, Power and Hand Tools, PPE Equipment, Material Bins, Tables, Carts, Tool Boxes, Storage Racks, Blast Cabinet, Scales, Pallet Jacks to 5,500 Lb. Capacity, Office Furniture, Avaya Telephone System, Zebra Label Printers, Shrink Fast LP Gas Torch & Shield Tubing, (4) Box Type Storage Trailers w/assorted Contents, Etc. For more information, please visit us on the web at hilcoind.com/premiumcomposites 9

10 OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA HilcoTM Industrial ONLINE AUCTION Cincinnati Milacron Twin & Single Screw Extruders with Downstream Equipment, Also Featuring Unused AST Drying System, Material Delivery Systems, Product Dies, Raw Material & More Real Estate Available through Private Negotiations Online Bidding Opens: Wednesday, November 4 th Online Bidding Closes: Wednesday, November 11 th Veblen, South Dakota HILCO Industrial is a division of Hilco Global Headquarters 5 Revere Drive, Ste. 206 Northbrook, IL All rights reserved Printed in USA PRE4721 IL License # Please visit our website at to review our complete terms and conditions. Terms of Sale A 16% buyer's premium will be charged on all assets when payment is made by means of cash, cashier s check, company check (with bank letter of guarantee) or wire transfer within 48 hours of sale close. an 18% buyer's premium will be charged on all assets when payment is made by credit card (accepted for invoices of $2000 or less), or when payment is received after 48 hours of sale close. Everything will be sold online to the highest bidder for cash, in accordance with the Auctioneer s customary Terms of Sale, copies of which will be posted online. All items will be sold as is, where-is without any warranties, expressed or implied. Although obtained from sources deemed reliable, the Auctioneer makes no warranty or guarantee to the accuracy of the information herein contained. Bidders are encouraged to thoroughly inspect the items on which they intend to bid prior to sale. Absolutely no items will be removed until the day after the conclusion of the sale and payment is made in full. Subject to additions, deletions and prior sale. For updated information, please visit our website at for any date, sale process, terms and conditions and list of available assets. Payment: INVOICES WILL BE ED WITHIN 24 HOURS AFTER THE AUCTION CLOSES. Payment is to be made to Hilco Industrial, LLC. Payment Options: VISA, Mastercard Discover accepted if invoice total is $2,000 or less; Wire Transfer; Certified Check; or Company Check (with Bank letter of guarantee see sample letter below). All sales are subject to sales tax. Purchasers claiming exemptions from taxes must provide proof satisfactory to the Auctioneer of their entitlement to claim such exemptions. Please see complete terms and conditions on our website, Sample Bank Letter (Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at the Auction of Premium Composites on November 4-11, Follow Us on: A Hilco Global Company Vested in Your Success