INNOVATIVE ORBITAL SOLUTIONS. PRODUCTS

Transcription

1 PRODUCTS

2 Sustainable development AXXAIR SAS promotes sustainable development in industrial activities. As a part of our sustainable approach, we have decided to no longer issue paper catalogues. In today's connected world, we believe that digital catalogues with added functions are a practical and suitable alternative for all. We hope that you understand and will adopt this approach, for our good and the good of future generations. This catalogue may be viewed online and may be printed, if desired, so as not to impose our view unilaterally. We do, however, encourage you to refrain from printing, or to print only the information that is of greatest interest to you. Please do not print unnecessarily

3 Business Premises AXXAIR SAS is located in areas in which customer demand is great, in order to provide locally-based, high-quality and timely service. Accordingly, we have expanded our presence by establishing subsidiaries in Korea in 2006, in China in 2009, in Germany in 2010 and in USA in Our products are distributed in over 35 countries through our "distributor" partner network, all of whom have been trained at our plant.

4 Production AXXAIR SAS makes efforts to maintain industrial jobs in France. To this end, 98% of manufacturing is performed in the Rhône-Alpes region of France. We sub-contract 100% of our production to partners that include mechanics workshops, and sub-contractors in sheet metal working, electronics, etc. We design all of our machines in our integrated engineering department, which is made up of 3 people. AXXAIR SAS ZI les Bosses 330 B Route de PORTE LES VALENCE F Etoile sur Rhône, France Tel: + 33 (0) Fax: + 33 (0) commerce@axxair.com

5 CUSTOMER SERVICE AXXAIR SAS has always focused on customer satisfaction first and foremost. This policy has been consolidated by the creation of a dedicated customer service department two years ago. This department manages After-Sales Service/Repair, training and samples, in both French and English. Replacement parts: Our system centralizes data from CAD sources and the assembly plant, and provides traceability using the part Serial Number and commercial management to integrate part prices. This system is integrated into our secure extranet and allows us to find the precise drawing number corresponding to your part in real time and consequently to quickly get the right part to you anywhere in the world. AXXAIR SERVICE PORTAL / Partner interface

6 CUSTOMER SERVICE Customer samples: We create samples for our customers and prospective customers. As a result, you can view welding quality and even perform validation testing before purchasing! When purchasing equipment, we provide you with a welding report detailing all of the programs used, so that you don't have to repeat them. Training: We provide training in cutting, bevelling and orbital welding. Upon training completion, all trainees are issued a comprehensive training manual and an AXXAIR Diploma. We also provide the same types of training programs at customer premises. Transport organization: We organize 95% of transportation operations for our customers, worldwide and with or without tracking. Logistical Supply Chain: We are able to supply your merchandise next-day after ordering for the Cutting and Bevelling Range (for quantities < 5), and within two weeks for the Welding Range (quantities < 5). Equipment warranty: We offer a 2-years mechanical warranty after delivery for all of our equipment (see Terms and Conditions of Sale). All of our suppliers are selected to meet stringent Quality criteria. Please see the detailed Warranty clauses in the General Terms and Conditions of Sale.

7 Global Process Since 1999, the year in which AXXAIR SAS launched its orbital welding activities, the company has taken a leap forward with its global offer strategy! In doing so, we are able to propose innovative solutions in cutting, bevelling and orbital welding that will allow you to take a global approach to your piping and boiler-making projects. Cutting Bevelling Prefab welding In-line welding In-line welding Power sources

8 Markets Our machines aims at high added value potential markets dealing with pipes and tubes. Food processing industry: thin tubes processes with precise and repeat requirements on cutting and weldind processes ( food and liquid plants ) pharmaceutical industry : thin tubes processes with precise and repeat requirements on cutting and weldind processes to avoid bacteria exchange on the weld. 100 % radio controlled welds ( according to countries and local standards ) Semiconductor :: pure water, pure gaz and air compressed tubes netwoks installation, These processes require precise cutting and 100% radio controlled orbital welding. Aeronautics: thin titanium tubes processes on coolng networks. Orbital cutting is mandatory and the weld is done under gaz protection, with closed heads. Chemistry oil industries: Special pipes Stainless steel processes ( Refactory and corrosion resistant ). A full process of cutting, bevelling and welding is applied to the pipes, with AVC and oscillatin, for 100% radio controlled welds

9 Markets - Examples Nuclear : processing tubes and pipes on secondary fluid netwoks Markets : Sea water desalination, tube production and customized cutting and/or bevelling, criogenics, urban street elements stainless steel Tube cutting and welding for drinking water network (Pamplona, Espagne) Cutting, bevelling and welding with AVC/OSC, Solar plant Clean room big diameter cutting

10 Examples

11 ORBITAL CUTTING

12 ORBITAL CUTTING CC81 ø5 - ø78 mm ø0,25 to ø3 '' - Ø 0,25 to 3 : very wide range of use - Cutting precision: - perpendicular cuts < 0.25 mm - seamless cutting Weight:15 kg / 33 lbs (easy handling) - Ideal for use at worksites Blade-jaws distance of 2 mm Limits vibration and distortion with thin and small-diameter tubes Concentric clamping with 3 jaws in stainless steel to eliminate tube distortion Worksite carry case Adjustment via the speed changer References Motors Accessories Consumables M21 : Metabo 220V mono Thickness < 7mm LS6872 : 1 to 3 mm 81M21 81M11 M11 : Metabo 110V mono Thickness < 7mm All motors are delivered in their individual case, including the necessary tools CCSER1/CCSER2: simple/bearing stand LS6844 : 2 to 7 mm LS63100 : 0.7 to 1,5 mm CCLUP: lubricant

13 ORBITAL CUTTING CC121ECO ø5 - ø121 mm ø0,25 to ø4,5 '' - Basic stainless steel jaws Ø 1 to Ø 4,5 ( 24 to 121 mm ) - Included stainless steel auxiliary jaws Ø 0,25 to Ø 4,25 ( 5 to 108 mm ) - Cutting precision: perpendicular cuts < 0.25 mm - Dual-output cutting motor with 2 blade positions for uptake - Weight: 36 kg / 79 lbs (easy handling) Blade-jaw distance of 2/13.5 mm Limits vibration and tube distortion Concentric clamping with 4 jaws in stainless steel, standard, to eliminate tube distortion Penetration check feature: operator safety feature Adjustment via the speed changer References Motors Accessories Consumables CCPS21: support feet 121ECO2 121ECO1 MD21: Me tabo 1010 W, 220 V, Thickness < 7 mm MD11: Me tabo 1010 W, 110 V, Thickness < 7 mm All motors are delivered in their individual case, including the necessary tools CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench CCDT: extended penetration lever CCSER1/CCSER2: simple/bearing stand LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS63100 : 0.7 to 1,5 mm CCLUP: lubricant

14 ORBITAL CUTTING CC121 ø5 - ø121 mm ø0,25 to ø4,5 '' - Basic stainless steel jaws Ø1 to Ø 4,5 ( 24 to 121 mm ) - Included stainless steel auxiliary jaws Ø 0,25 to Ø 4,25 ( 5 to 108 mm ) - Cutting precision: perpendicular cuts < 0.25 mm - Scalability: May be transformed into a bevelling and orbital welding machine - Dual-output cutting motor with 2 blade positions for uptake - Weight: 37 kg / 82 lbs (easy handling) Blade-jaw distance of 2/13.5 mm. Limits vibration and tube distortion Concentric clamping with 4 jaws in stainless steel, standard, to eliminate tube distortion Motors: slow, fast, pneumatic Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 121FS29 121FS19 121FS25 121FS15 121PD Motor 220V, mono : FS29: Thickness inox <5mm FS25: Thickness Inox >5mm Motor 110V, mono : FS19: Thickness inox <5mm FS15: Thickness Inox >5mm MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench CCDT: extended penetration lever SAEP-00 : electric rotation autoline 1CC21 to CC321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LS63100 : 0.7 to 1,5 mm LC300 : Bevelling blade 30 LC375 : Bevelling blade 37,5 LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

15 ORBITAL CUTTING CC171 ø16 - ø170 mm ø0,625 to ø6,625 '' - Basic stainless steel jaws Ø 2,75 to Ø 6,625 (70 to 170 mm ) - Included stainless steel auxiliary jaws Ø 0,625 to Ø 4,65 ( 16 to 118 mm ) - Cutting precision: perpendicular cutting <0.25 mm - Scalability: may be transformed into a bevelling and orbital welding machine - Dual-output cutting motor with 2 blade positions for uptake - Weight: 44 kg / 97 lbs (easy handling) Blade-jaw distance of 2/13.5 mm. Limits vibration and tube distortion Concentric clamping with 4 jaws in stainless steel, standard, to eliminate tube distortion Motors: slow, fast, pneumatic Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 171FS29 171FS19 171FS25 171FS15 171PD Motor 220V, mono : FS29: Thickness inox <5mm FS25: Thickness Inox >5mm Motor 110V, mono : FS19: Thickness inox <5mm FS15: Thickness Inox >5mm MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench CCDT: extended penetration lever SAEP-00 : electric rotation autoline 1CC21 to CC321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LS63100 : 0.7 to 1,5 mm LC300 : Bevelling blade 30 LC375 : Bevelling blade 37,5 LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

16 ORBITAL CUTTING CC221 ø59 - ø225 mm ø2 to ø8,625 '' - Basic stainless steel jaws Ø 4,55 to 8,625 ( Ø 116 to Ø 225 mm ) - Included stainless steel auxiliary jaws Ø 2 to Ø 6,65 ( Ø 59 to Ø 169 mm ) - Cutting precision: perpendicular cutting <0.25 mm - Dual-output cutting motor with 2 blade positions for uptake - Scalability: may be transformed into a bevelling and orbital welding machine - Weight: 51 kg / 112 lbs (easy handling) Optimized Blade-jaws distance Limits vibration and tube distortion Concentric clamping with 6 jaws in stainless steel, standard, to eliminate tube distortion Motors: slow, fast, pneumatic Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 221FS29 221FS19 221FS25 221FS15 221PD Motor 220V, mono : FS29: Thickness inox <5mm FS25: Thickness Inox >5mm Motor 110V, mono : FS19: Thickness inox <5mm FS15: Thickness Inox >5mm MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 1CC21 to CC321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LS63100 : 0.7 to 1,5 mm LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

17 ORBITAL CUTTING CC321 ø140 - ø330 mm ø5,5 to ø12,75 '' - Basic stainless steel jaws Ø8,5 to 12,75 ( Ø216 to Ø 330 mm ) - Included stainless steel auxiliary jaws Ø5,5 to Ø 10 ( Ø 140 to Ø 256 mm ) - Cutting precision: perpendicular cutting < 0.25 mm - Dual-output cutting motor with 2 blade positions for uptake - Scalability: may be transformed into a bevelling and orbital welding machine Lifting eye - Weight: 73 kg / 161 lbs (easy handling) Optimiszed blade-jaws distance Limits vibration and tube distortion Concentric clamping with 8 jaws in stainless steel, standard, to eliminate tube distortion Motors: slow, fast, pneumatic Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 321FS29 321FS19 321FS25 321FS15 321MS182B 321MS181B 321PD Motor 220V, mono : FS29: Thickness Inox <5mm FS25: Thickness Inox >5mm MS18B-2 : 1800W Motor 110V, mono : FS19: Thickness Inox <5mm FS15: Thickness Inox >5mm MS18B-1 : 1800W MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 1CC21 to CC321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

18 ORBITAL CUTTING CC421 ø212 - ø422 mm ø8.625 to ø 16'' - Basic stainless steel jaws Ø 12 to 16 ( Ø 350 to Ø 420 mm ) - Included stainless steel auxiliary jaws Ø 8,625 to 12,75 ( Ø 212 to Ø 352 mm ) - Cutting precision: perpendicular cutting <0.4 mm - Dual-output cutting motor with 2 blade positions for uptake - Lifting eye - Weight: 186 kg / 410 lbs Optimiszed blade-jaws distance Limits vibration and tube distortion Concentric clamping with 8 jaws in stainless steel, standard, to eliminate tube distortion Motors: electric and pneumatic Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 421MS182B 421MS181B 421PD MS18B-2 : motor 1800W,220V MS18B-1 : motor 1800W,110V MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools SAEP-000 : electric rotation autoline CC421 to CC721 ( 110 V - 230V ) On demand CCBSB2-003 : Adjustable height table table for 421/521 and 721 CCBSB2-004 : Support bench - 1,5m module for 421 / 521 and 721 CCBSB2-005 : Connection kit for bench CCBSB2 LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

19 ORBITAL CUTTING CC521 ø312 - ø522 mm ø12.75 to ø20 '' - Basic stainless steel jaws Ø 15,5 to 20 ( Ø 450 to Ø 522 mm ) - Included stainless steel auxiliary jaws Ø 12,75 to 15,5 ( Ø 312 to Ø 452 mm ) - Cutting precision: perpendicular cuts < 0.4 mm - Dual-output cutting motor with 2 blade positions for uptake - Lifting eye - Weight: 223 kg / 492 lbs Optimiszed blade-jaws distance Limits vibration and tube distortion Concentric clamping with 8 jaws in stainless steel, standard, to eliminate tube distortion Motors: electric and pneumatic Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 521MS182B 521MS181B 521PD MS18B-2 : motor 1800W,220V MS18B-1 : motor 1800W,110V MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools SAEP-000 : electric rotation autoline CC421 to CC721 ( 110 V - 230V ) On demand CCBSB2-003 : Adjustable height table table for 421/521 and 721 CCBSB2-004 : Support bench - 1,5m module for 421 / 521 and 721 CCBSB2-005 : Connection kit for bench CCBSB2 LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

20 ORBITAL CUTTING CC721 ø447 - ø725 mm ø18 to ø28 '' - Basic stainless steel jaws Ø18 to Ø 28 (Ø653 to Ø 725 mm ) -Included stainless steel auxiliary jaws Ø 12,75 to 18 ( Ø 447 to Ø 654 mm ) - Cutting precision: perpendicular cutting < 0.4 mm - Lifting eye - Weight: 256 kg / 564 lbs Optimiszed blade-jaws distance Limits vibration and tube distortion Concentric clamping with 8 jaws in stainless steel, standard, to eliminate tube distortion Motors: electric and pneumatic Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 721MS182B 721MS181B 721PD MS18B-2 : motor 1800W,220V MS18B-1 : motor 1800W,110V MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools SAEP-000 : electric rotation autoline CC421 to CC721 ( 110 V - 230V ) On demand CCBSB2-003 : Adjustable height table table for 421/521 and 721 CCBSB2-004 : Support bench - 1,5m module for 421 / 521 and 721 CCBSB2-005 : Connection kit for bench CCBSB2 LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

21 ORBITAL CUTTING CC1100 ø711 - ø1016 mm ø28 to ø40 - Basic stainless steel jawsø 28 to 40 (Ø711 to Ø1016 mm ) - Cutting precision: perpendicular cuts < 0.4 mm - Weight: 900 kg / 1984 lbs Machine height adjustment machine Concentric clamping with 16 jaws in stainless steel, standard, to eliminate distortion of thin tubes Automatic pneumatic clamping Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables 1100PD MOPD: pneumatic 60 to 110 rpm, air flow rate 1500 l/min at 6 bar All motors are delivered in their individual case, including the necessary tools On request LS6872 : 1 to 3 mm LS6844 : 2 to 7 mm LS8080: 1 to 3 mm LS8054: 2 to 7 mm LS8034 : 5 to 12 mm LS9038 : 5 to 15 mm LCA9028A : Carbide saw blades for carbon steel only thick. 4 to 15mm CCLUH: lubricant

22 Accessories GA10 -X - XX GA15S- XXX FS XX MS18B MOPD SAEP-xxx Accessories Cutting motors Bevelling motors SAEP-00 : electric rotation autoline 1CC21 to CC321 ( 110 V - 230V ) SAEP-000 : electric rotation autoline CC421 to CC721( 110 V - 230V ) Cutting motor 220V mono : FS29 : Thickness Inox < 5 mm FS25 : Thickness Inox > 5 mm MS18B-2 : motor 1800W Cutting motor 110V mono : FS19 : Thickness Inox < 5 mm FS15 : Thickness Inox > 5 mm MS18B-1 : motor 1800W MOPD: pneumatic motor All motors are delivered in their individual case, including the necessary tools Carbure motor 220V with protection : GA : for 121 GA : for 171 GA : for 221 GA : for 321 Carbure motor 110V with protection : GA : for 121 GA : for 171 GA : for 221 GA : for 321 GA15S-220 : 220 V -1800W GA15S-110 : 110 V -1800W All motors are delivered in their individual case, including the necessary tools pied de page

23 Accessories CC121ECO - > CC321 CCBSB-001 CCBSB-002 CC421 - > CC721 CCBSB2-003 CCBSB2-004 CCBSB2-005 CCBSB2-004 CCPS21 CCSER1 CCSER2 Accessories CCBSB-001: bench with height adjustment m - CC121ECO -> CC321 CCBSB-002: additional 1.5 m bench - CC121ECO -> CC321 CCPS21: support feet - CC121ECO -> CC321 CCSER1/CCSER2: simple/bearing stand On demand CCBSB2-003 : Adjustable height table table for 421/521 and 721 CCBSB2-004 : Support bench - 1,5m module for 421 / 521 and 721 CCBSB2-005 : Connection kit for bench CCBSB2

24 Consumables LCA9028A LC375 LC300 Blades Sold in boxes of 5 : LS63128 : from 0,5 to 0,9 mm LS63100 : from 0,7 to 1,5 mm LS6364 : from 1 to 3 mm LS6872 : from 1 to 3 mm LS6844 : from 2 to 7 mm LS8034 : from 5 to 12 mm LS8054 : from 2 to 7 mm LS8080 : from 1 to 3 mm LS9038 : from 5 to 15 mm Sold singly : LC300 : 30 bevelling blade LC375 : 37.5 bevelling blade LCA9028A : 4 to 15 mm thickness carbide cutting blade (carbon steel only)

25 Consumables CCLUH CCLUP Lubricants CCLUH: hi-performance liquid lubricant CCLUP: paste lubricant for use with M21 / M11 and 121ECO 1 / 121ECO 2

26 Dimensions H L l H L l H H L l L

27 Dimensions H L l

28 ORBITAL BEVELLING

29 BEVELLING MACHINES GA121 ø15 - ø121 mm ø0,5 to ø4,5 '' - Basic jaws Ø1 to 4,5 ( Ø24 to Ø121 mm ) - Included stainless steel auxiliary jaws Ø 0,25 to 4,25 ( Ø 15 to Ø 108 mm ) - Supplied with plastic protection and profile guide - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 8 mm according to spinner* - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 37 kg / 82 lbs (easy handling) V bevel with profile guide roller J bevel with profile guide roller Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables GA121-2 GA121-1 GA : 220V mono GA :110V mono CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV-300: 30 spinner (Max 8mm) TV-375: 37.5 spinner (Max 7mm) TV-450: 45 spinner (Max 6,5mm) TJ-100: 10 spinner with 6 rollers (Max 8mm) All spinner are delivered with their carbide inserts mounted

30 BEVELLING MACHINES GA171 ø33 - ø170 mm ø1,25 to ø6,625 '' - Basic jaws Ø 2,75 to 6,625 ( Ø70 to Ø170 mm ) - Included stainless steel auxiliary jaws Ø 0,625 to 4,65 ( Ø 33 to Ø 118 mm ) - Supplied with plastic protection and profile guide - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 8 mm according to spinner* - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 44 kg / 97 lbs (easy handling) V bevel with profile guide roller J bevel with profile guide roller Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables GA171-2 GA171-1 GA : 220V mono GA :110V mono CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV-300: 30 spinner (Max 8mm) TV-375: 37.5 spinner (Max 7mm) TV-450: 45 spinner (Max 6,5mm) TJ-100: 10 spinner with 6 rollers (Max 8mm) All spinner are delivered with their carbide inserts mounted

31 BEVELLING MACHINES GA221 ø59 - ø225 mm ø2 to ø8,625 '' - Basic jaws Ø4,55 to 8,625 (Ø116 t oø 225 mm ) - Included stainless steel auxiliary jaws Ø 2 to 6,65 ( Ø59 to Ø 169 mm ) - Supplied with plastic protection and profile guide - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 8 mm according to spinner* - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 51 kg / 112 lbs (easy handling) V bevel with profile guide roller J bevel with profile guide roller Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables CCPS21: support feet GA221-2 GA221-1 GA : 220V mono GA :110V mono CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV-300: 30 spinner (Max 8mm) TV-375: 37.5 spinner (Max 7mm) TV-450: 45 spinner (Max 6,5mm) TJ-100: 10 spinner with 6 rollers (Max 8mm) All spinner are delivered with their carbide inserts mounted

32 BEVELLING MACHINES GA321 ø140 - ø330 mm ø5,5 to ø12,75'' - Basic jaws Ø 8,5 to 12,75 ( Ø 216 to Ø 330 mm ) - Included stainless steel auxiliary jaws Ø 5,5 to 10 ( Ø 153 to Ø 256 mm ) - Supplied with plastic protection and profile guide - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 8 mm according to spinner* - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 73 kg / 161 lbs (easy handling) V bevel with profile guide roller J bevel with profile guide roller Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables CCPS21: support feet GA321-2 GA321-1 GA : 220V mono GA :110V mono CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 (110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV-300: 30 spinner (Max 8mm) TV-375: 37.5 spinner (Max 7mm) TV-450: 45 spinner (Max 6,5mm) TJ-100: 10 spinner with 6 rollers (Max 8mm) All spinner are delivered with their carbide inserts mounted

33 BEVELLING MACHINES GAP121 ø15 - ø121 mm ø0,5 to ø4,5 '' - Basic jaws Ø24 to Ø121 mm - Included stainless steel auxiliary jaws Ø 15 to Ø 108 mm - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 12,7mm for all spinners - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 43 kg / 95 lbs (easy handling) End stop adjustment : shows directly thickness of the tube for a V prep without land Fine adjustment : the screw allows a strong stop and a fine land adjustment Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables GAP121-2 GAP121-1 GA : 220 V mono GA : 110 V mono CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV15-300: 30 spinner (Max 12,7mm) TV15-375: 37.5 spinner (Max 12,7mm) TV15-450: 45 spinner(max 12,7mm) TJ : Set J head for GA15 at 15 with 8 carbide tips without roller All spinner are delivered with their carbide inserts mounted

34 BEVELLING MACHINES GAP171 ø22 - ø170 mm ø0,8 to ø6,625 '' - Basic jaws 704 to Ø170 mm - Included stainless steel auxiliary jaws Ø 33 to Ø 118 mm ) - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 12,7mm for all spinners - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 50 kg : 110 lbs (easy handling) End stop adjustment : shows directly thickness of the tube for a V prep without land Fine adjustment : the screw allows a strong stop and a fine land adjustment Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables GAP171-2 GAP171-1 GA : 220 V mono GA : 110 V mono CCPS21: support feet CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV15-300: 30 spinner (Max 12,7mm) TV15-375: 37.5 spinner (Max 12,7mm) TV15-450: 45 spinner(max 12,7mm) TJ : Set J head for GA15 at 15 with 8 carbide tips without roller All spinner are delivered with their carbide inserts mounted

35 BEVELLING MACHINES GAP221 ø59 - ø225 mm ø2 to ø8,625 '' - Basic jaws Ø116 to Ø225 mm - Included stainless steel auxiliary jaws Ø 59 to Ø 169 mm - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 12,7mm for all spinners - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 57 kg / 126 lbs (easy handling) End stop adjustment : shows directly thickness of the tube for a V prep without land Fine adjustment : the screw allows a strong stop and a fine land adjustment Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables CCPS21: support feet GAP221-2 GAP221-1 GA : 220 V mono GA : 110 V mono CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 ( 110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV15-300: 30 spinner (Max 12,7mm) TV15-375: 37.5 spinner (Max 12,7mm) TV15-450: 45 spinner(max 12,7mm) TJ : Set J head for GA15 at 15 with 8 carbide tips without roller All spinner are delivered with their carbide inserts mounted

36 BEVELLING MACHINES GAP321 ø140 - ø330 mm ø5,5 to ø12,75'' - Basic jaws Ø216 to Ø330 mm - Included stainless steel auxiliary jaws Ø 140 to Ø 256 mm - Technology: screw carbide inserts: 10 x faster than HSS tools. Superior service life - Max 12,7mm for all spinners - Patented System - Scalability: may be transformed into a cutting and orbital welding machine - Weight: 79 kg / 174 lbs (easy handling) End stop adjustment : shows directly thickness of the tube for a V prep without land Fine adjustment : the screw allows a strong stop and a fine land adjustment Outer profile guide system: to account for tube "out of round" Rotation handle as standard: extends blade life and optimizes cutting quality References Motors Accessories Consumables CCPS21 : support legs GAP321-2 GAP321-1 GA : 220 V mono GA : 110 V mono CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SAEP-00 : electric rotation autoline 121 to 321 (110 V - 230V ) CCSER1/CCSER2: simple/bearing stand All motors are delivered in their individual case, including the necessary tools PC30-08-B02: carbide inserts TV15-300: 30 spinner (Max 12,7mm) TV15-375: 37.5 spinner (Max 12,7mm) TV15-450: 45 spinner(max 12,7mm) TJ : Set J head for GA15 at 15 with 8 carbide tips without roller All spinner are delivered with their carbide inserts mounted

37 Accessories GA10 -X - XX GA15S- XXX FS XX MS18B SAEP-xxx Accessories Cutting motors bevelling motors SAEP-00 : electric rotation autoline CC121 to CC321 ( 110 V - 230V ) Cutting motor 220V mono : FS29 : Thickness Inox < 5 mm FS25 : Thickness Inox > 5 mm MS18B-2 : 1800W Cutting motor 110V mono : FS19 : Thickness Inox < 5 mm FS15 : Thickness Inox > 5 mm MS18B-1 : 1800W MOPD: pneumatic motor All motors are delivered in their individual case, including the necessary tools GAxxx motor 220V with protection : GA : for 121 GA : for 171 GA : for 221 GA : for 321 motor 110V with protection : GA : for 121 GA : for 171 GA : for 221 GA : for 321 GAPxxx GA15S-220 : 220 V -1800W GA15S-110 : 110 V -1800W

38 Accessories CC121ECO - > CC321 CCBSB-001 CCBSB-002 CCPS21 CCSER1 CCSER2 Accessories CCBSB-001: bench with height adjustment m - CC121ECO -> CC321 CCBSB-002: additional 1.5 m bench - CC121ECO -> CC321 CCPS21: support feet - CC121ECO -> CC321 CCSER1/CCSER2: simple/bearing stand

39 Consumables KS30 PC30-08-B02 TV TJ-100 TV TV-300 TV TV-375 TJ TJ15G-xxx TV-450 > H > Accessories Consumables TV-300: 30 spinner with guide roller (Max 8mm) TV-375: 37.5 spinner with guide roller (Max 7mm) TV-450: 45 spinner with guide roller (Max 6,5mm) TJ-100: 10 J spinner with guide roller (Max 8mm) PC30-08-B02: carbide inserts KS30: insert tightening tool TV15-300: 30 spinner ( max 12,7mm) TV15-375: 37.5 spinner ( max 12,7mm) TV15-450: 45 spinner ( max 12,7mm) TJ : Set J head for GA15 at 15 with 8 carbide tips without roller TJ15G-xxx : roller H=xxx xxx : 005 -> 125, step 5 ( 0,5mm -> 12,5mm ) On demand : TJ (20 ), TJ-250 ( 25 )

40 Dimensions

41 Dimensions H L l Z.I. Les Bosses F ETOILE-SUR-RHONE Ø min Ø max H x L x l (mm) GAP mm mm 431x526x kg GAP mm 170 mm 473x550x kg GAP mm 225 mm 514x575x kg GAP mm 330 mm 674x641x kg H Protection class : IP 20

42 FACING MACHINES

43 FACING MACHINES DC25 ø3 - ø25,4 mm ø0,1 to ø1 '' Burr-free tube squaring machine - Accurate manual advance (0.1 mm steps) - Light and compact: 2.8 kg / 6 lbs with battery Drill / Driver: - QuiXS quick change system - 18V motor - Lithium-Ion technology - LED battery charge indicator - Supplied with two 1.5 Ah 18V batteries, rapid battery charger Jaw opens wide for easy positioning of tube. QuiXS: Lets you change the head or fit a chuck in just a few seconds. Optionally, we can supply a package with a DC65 head References Accessories Consumables DC-OUT1: Box of 10 blades, TIALN HSS-E DC25-P2 (220 V) DC25-P1 (110 V) DCM25-XX: XX mm diameter jaws for DC25 DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

44 FACING MACHINES DC65 ø3 - ø63,5 mm ø0,1 to ø2,5 '' Burr-free tube squaring and bevelling machine - Accurate manual advance (0.1 mm steps) - Quick blade adjustment, no disassembly required - Light and compact: 7.1 kg with battery - Removable support foot - 30 and 45 outside bevel possible with optional tool holder. - squaring and bevelling in one operation Drill / Driver - QuiXS quick change system - 18V motor - Lithium-Ion technology - LED battery charge indicator - Supplied with two 3Ah 18V batteries, rapid battery charger Jaw opens wide for easy positioning of tube. QuiXS: Lets you change the head or fit a chuck in just a few seconds. Tool adjusted to the diameter of tube to be machined in just a few seconds. References Accessories Consumables DC65-G2 (220 V) DC65-G1 (110 V) DCM65A-XX: Jaws for diameters between 1 and 2,5 inches for the DC65. DCM65B-XX: Jaws for diameters between 0,1 and 1 inch. for the DC65. DCM6525: Spacer for fitting DC25 jaws on a DC65. DC65-P300: 30 bevel tool holder DC65-P450: 45 bevel tool holder DC-OUT1: Box of 10 blades, TIALN HSS-E DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

45 FACING MACHINES DC PACK ø3 - ø63,5 mm ø0,1 to ø2,5 '' DC25 and DC65 package AXXAIR offers a set which combines the best in squaring in a single box Ah 18V drill driver with all accessories. - DC25 squaring head - DC65 squaring head With the QuiXS system, you can change from one set-up to another in just a few seconds. DC25: true up tubes with a light, ultra-compact machine. DC65: squaring and bevelling (optional bevelling tool holder) on the bench or directly on the tubes (dismountable foot). Jaw opens wide for easy positioning of tube. QuiXS: Lets you change the head or fit a chuck in just a few seconds. Tool adjusted to the diameter of tube to be machined in just a few seconds. References Accessories Consumables DCPACK-G2 (220 V) DCPACK-G1 (110 V) DCM25-XX: XX mm diameter jaws for DC25 DCM65A-XX: Jaws for diameters between 1 and 2,5 inches for the DC65. DCM65B-XX: Jaws for diameters between 0,1 and 1 inch. for the DC65. DCM6525: Spacer for fitting DC25 jaws on a DC65. DC65-P300: 30 bevel tool holder DC65-P450: 45 bevel tool holder DC-OUT1: Box of 10 blades, TIALN HSS-E DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

46 FACING MACHINES DC25-M ø3 - ø25,4 mm ø0,1 to ø1 '' Burr-free tube squaring machine - Accurate manual advance (0.1 mm steps) - Light and compact: 4,3 kg / 9 lbs Mains motor - Motor 1100W. - Two speed reducer with thumbwheel speed change. - Top quality speed changer. - Anti-start protection. - Reduction housing in cast aluminium Jaw opens wide for easy positioning of tube. HSS TIALN HIGH QIALITY Reversible blade (two cutting edges) Optionally, we can supply a package with a DC65 head References Accessories Consumables DC-OUT1: Box of 10 blades, TIALN HSS-E DC25-M1 (110 V) DC25-M2 (220 V) DCM25-XX: XX mm diameter jaws for DC25 DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

47 FACING MACHINES DC65-M ø3 - ø63,5 mm ø0,1 to ø2,5 '' Burr-free tube squaring and bevelling machine - Accurate manual advance (0.1 mm steps) - Quick blade adjustment, no disassembly required - Light and compact: 7.1 kg with battery - Removable support foot - 30 and 45 outside bevel possible with optional tool holder. - squaring and bevelling in one operation - Reduction housing in cast aluminium Mains motor - Motor 1100W. - Two speed reducer with thumbwheel speed change. - Top quality speed changer. - Anti-start protection. Jaws open wide for easy positioning of tube. HSS TIALN HIGH QIALITY Reversible blade (two cutting edges) Tool adjusted to the diameter of tube to be machined in just a few seconds. References Accessories Consumables DC65-M1 (110 V) DC65-M2 ( 220V) DCM65A-XX: Jaws for diameters between 1 and 2,5 inches for the DC65. DCM65B-XX: Jaws for diameters between 0,1 and 1 inch. for the DC65. DCM6525: Spacer for fitting DC25 jaws on a DC65. DC65-P300: 30 bevel tool holder DC65-P450: 45 bevel tool holder DC-OUT1: Box of 10 blades, TIALN HSS-E DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

48 FACING MACHINES DC PACK M ø3 - ø63,5 mm ø0,1 to ø2,5 '' DC25 and DC65 package AXXAIR offers a set which combines the best in squaring in a single box. - A mains motor 1100W - DC25 squaring head - DC65 squaring head You can change from one set-up to another in just a few seconds. DC25: true up tubes with a light, ultra-compact machine. DC65: squaring and bevelling (optional bevelling tool holder) on the bench or directly on the tubes (dismountable foot). Jaws open wide for easy positioning of tube. HSS TIALN HIGH QIALITY Reversible blade (two cutting edges) Tool adjusted to the diameter of tube to be machined in just a few seconds. References Accessories Consumables DCPACK-M1 : Pack DC25 + DC65 (110 V) DCPACK-M2 : Pack DC25 + DC65 (220 V) DCM25-XX: XX mm diameter jaws for DC25 DCM65A-XX: Jaws for diameters between 1 and 2,5 inches for the DC65. DCM65B-XX: Jaws for diameters between 0,1 and 1 inch. for the DC65. DCM6525: Spacer for fitting DC25 jaws on a DC65. DC65-P300: 30 bevel tool holder DC65-P450: 45 bevel tool holder DC-OUT1: Box of 10 blades, TIALN HSS-E DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

49 FACING MACHINES DC115-AM ø12 - ø115 mm ø0,5 to ø4,5 '' Burr-free tube squaring and bevelling machine - thickness < 3mm ( according to material ) - Ideal tool to face a band saw cut before automatic welding - Accurate manual advance: 0.1 mm step graduation 4/1000 inches - Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing - 30 and 45 outside bevel possible with optional tool holder. - Squaring and bevelling in one operation. - Possibility to use two tools simultaneously. - Minimal straight length of the tube: 28 mm. - Delivered in high quality protection case. - Light and compact : 11 kg / 24 lbs - Motor 1100W with large speed range (2 gear) - Worm and gear transmission for optimal speed range Stainless steel clamping collets One set per diameter Sliding adjustment of tool Holder (30 or 45 bevel angle) Easy clamping of the tube. References Accessories Consumables DC-OUT1: Box of 10 blades, TIALN HSS-E DC115-AM2 (220 V) DC115-AM1 (110 V) DCM115-XXX : Clamping jaw for DC115 DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

50 FACING MACHINES DC115-BM ø12 - ø115 mm ø0,5 to ø4,5 '' Big range: Ø12 to Ø115 mm through concentric clamping on the full diameter range Burr-free tube squaring and bevelling machine - thickness < 3mm (according to material) - Ideal tool to face a band saw cut before automatic welding - Accurate manual advance: 0.1 mm step graduation 4/1000 inches - Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing - 30 and 45 outside bevel possible with optional tool holder. - Squaring and bevelling in one operation. - Possibility to use two tools simultaneously. - Minimal straight length of the tube: 58 mm. - Delivered in wooden box. Weight: 37 kg / 82 lbs Motor 1100W with large speed range (2 gear) Worm and gear transmission for optimal speed range 4 concentric stainless steel jaws: straight length for clamping 58 mm HSS TIALN HIGH QUALITY Reversible blade (two cutting edges) Bench mounting option: CCBSB-001 References Accessories Consumables DC-OUT1: Box of 10 blades, TIALN HSS-E DC115-BM2 (220 V) DC115-BM1 (110 V) DCM115-XXX : Clamping jaw for DC115 DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screwtool adjusted to the diameter of tube to be machined in just a few seconds

51 FACING MACHINES Accessories Consumables DC-OUT1: Box of 10 blades, TIALN HSS-E DC-UOUT1: Blade, TIALN HSS-E (single unit) DC-OUT2: Blade tightening screw Accessories DCM25-XX: Jaws for DC25 machine. Tube diameter = XX.XX mm (3 to 1 inch ). DCM65A-XX: Jaws for DC65 machine. Tube diameter between 1 and 2,5 inches. DCM65B-XX: Jaws for DC65 machine. Tube diameter between 0,1 and 1 inch. DCM115-XXX : Jaws for DC115 machine Stainless steel jaws, so as not to pollute the tube. A set of jaws is necessary for each outside diameter of tube to be machined. DCM6525: Spacer for fitting DC25 jaws on a DC65 DC65-P450: Tool holder for bevelling the outer edge at 45 * DC65-P300: Tool holder for bevelling the outer edge at 30 * Tool holders are supplied without blades *Bevelling possible over the whole of the machine's range (0,1 to 2,5 inches), if squaring and bevelling, range between 20 and 53 mm diameter, max

52 FACING MACHINES Accessories Accessories DCM25-MFxx.xx Micro-fiting jaws for DC25 ONLY - Stainless steel - Straight length : 4,3 mm mini DO NOT MOUNT THESE JAWS ON DC65 MACHINES

53 PREFAB WELDING

54 PREFAB WELDING SP121 ø12 - ø121 mm ø0,45 to ø4,5 '' - Basic stainless steel jaws Ø 1 to 4,5 ( Ø 24 to Ø 121 mm ) - Included stainless steel auxiliary jaws Ø 0,45 to 4,25 (Ø12 to Ø108mm) - Electric rotation autoline 110 V - 230V - Wide diameter range - Air-cooled: max. current 100 A at 100% - Water-cooled: max. current 200 A at 100% - Scalability: may be transformed into a cutting and orbital bevelling machine Weight: 45 kg / 99 lbs Axial adjustment for precise positioning Radial adjustment for precise positioning Driven by AXXAIR power source Mechanical profile guide: constant arc voltage References Accessories Consumables CCPS21: support feet FS29 /FS25: 220 V FS19 / FS15: 110 V SP121-A SP121-E MS18B-2 : 1800W / 220V MS18B-1 : 1800W /110 V GA10-2-xxx: 220 V GA10-1-xxx: 110 V GA15S-220 : 220 V GA15S-110 : 110 V CCSER1/CCSER2: simple/bearing stand SCE16-50 Ø 1,6 mm SCE24-50 Ø 2,4 mm

55 PREFAB WELDING SP171 ø16 - ø170 mm ø0,625 to ø6,625 '' - Basic stainless steel jaws Ø 2,75 to 6,625 (Ø70 to Ø 168 mm ) - Included stainless steel auxiliary jaws Ø 0,625 to 4,65 ( Ø 16 to Ø 118 mm ) - Electric rotation autoline 110 V - 230V - Wide diameter range - Air-cooled: max. current 100 A at 100% - Water-cooled: max. current 200 A at 100% - Scalability: may be transformed into a cutting and orbital bevelling machine Weight: 52 kg / 115 lbs Axial adjustment for precise positioning Radial adjustment for precise positioning Driven by AXXAIR power source Mechanical profile guide: constant arc voltage References Accessories Consumables CCPS21: support feet FS29 /FS25: 220 V FS19 / FS15: 110 V SP171-A SP171-E MS18B-2 : 1800W / 220V MS18B-1 : 1800W /110 V GA10-2-xxx: 220 V GA10-1-xxx: 110 V GA15S-220 : 220 V GA15S-110 : 110 V CCSER1/CCSER2: simple/bearing stand SCE16-50 Ø 1,6 mm SCE24-50 Ø 2,4 mm

56 PREFAB WELDING SP221 ø59 - ø225 mm ø2 to ø8,625 '' - Basic stainless steel jaws Ø 4,5 to 8,625 ( Ø 116 to Ø 219 mm ) - Included stainless steel auxiliary jaws Ø 2 to 6,65 ( Ø 59 to Ø 169 mm ) - Electric rotation autoline 110 V - 230V - Wide diameter range - Water-cooled: max. current 200 A at 100% - Scalability: may be transformed into a cutting and orbital welding machine Weight: 59 kg 130 lbs Axial adjustment for precise positioning Radial adjustment for precise positioning Driven by AXXAIR power source Mechanical profile guide: constant arc voltage References Accessories Consumables CCPS21: support feet FS29 /FS25: 220 V FS19 / FS15: 110 V SP221-E MS18B-2 : 1800W / 220V MS18B-1 : 1800W /110 V GA10-2-xxx: 220 V GA10-1-xxx: 110 V GA15S-220 : 220 V GA15S-110 : 110 V CCSER1/CCSER2: simple/bearing stand SCE16-50 Ø 1,6 mm SCE24-50 Ø 2,4 mm

57 PREFAB WELDING SP321 ø140 - ø330 mm ø5,5 to ø12,75'' - Basic stainless steel jaws Ø 8,5 to 12,75 (Ø 216 to Ø 323 mm ) - Included stainless steel auxiliary jaws Ø 5,5 to 10 ( Ø 140 to Ø 256 mm ) - Electric rotation autoline 110 V - 230V - Wide diameter range - Air-cooled: max. current 100 A at 100% - Water-cooled: max. current 200 A at 100% - Scalability: may be transformed into a cutting and orbital welding machine Weight: 81 kg / 179 lbs Axial adjustment for precise positioning Radial adjustment for precise positioning Driven by AXXAIR power source Mechanical profile guide: constant arc voltage References Accessories Consumables CCPS21: support feet FS29 /FS25: 220 V FS19 / FS15: 110 V SP321-E MS18B-2 : 1800W / 220V MS18B-1 : 1800W /110 V GA10-2-xxx: 220 V GA10-1-xxx: 110 V GA15S-220 : 220 V GA15S-110 : 110 V CCSER1/CCSER2: simple/bearing stand SCE16-50 Ø 1,6 mm SCE24-50 Ø 2,4 mm

58 Accessories SKTDI-xx SOAF SKIF-01 SKIB-01 Accessories Consumables Options SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SCE16-50 Ø 1.6 mm SCE24-50 Ø 2.4 mm SKTDI-30: 30 inclined torch kit SKTDI-45: 45 inclined torch kit SOAF: AVC/OSC for SC with wire feeder and water torch

59 Accessories SADF2 SADDD-15 SADFP-02 CCBSB-001 CCBSB-002 SCE16-50 SCE24-50 SKTD Accessories Consumables Options SKTD-01: spares kit for straight torch Ø1.6 mm SKTD-02: spares kit for straight torch Ø2.4 mm CCBSB-001: bench with height adjustment m CCBSB-002: additional 1.5 m bench SCE16-50 Ø 1.6 mm SCE24-50 Ø 2.4 mm SKTDI-30: 30 inclined torch kit SKTDI-45: 45 inclined torch kit SADF2: external wire feeder SADFP-02: wire guide SADDD-15 : Dual flow meter

60 Dimensions

61 INLINE WELDING

62 INLINE WELDING SATF-40ND ø6 - ø40 mm ø0,25'' - ø1,5'' - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode Weight: 8.8 kg / 19 lbs - All machines are delivered in their individual case Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table ) Adjustable spring- loaded system: to account for tube "out of round" References Accessories Consumables SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SATF-40ND SSED-24: offset tungsten electrode support Ø 2.4 mm offset range 4 to 7.5 mm SAFS-210 : Wire harness extension 10 M SMN40-XX Clamping jaws Ø in mm SATF40ND-A001 Window for SATF-40ND and MI SAGC-121 : SATF-40 /65 /115 Handler SCE16-XX : Ø 1,6 mm SCE24-XX : Ø 2,4 mm

63 INLINE WELDING SATF-65ND ø6 - ø65 mm ø0,25'' - ø2,5'' - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode Weight: 9.2 kg / 20 lbs - All machines are delivered in their individual case Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table ) Adjustable spring- loaded system: to account for tube "out of round" References Accessories Consumables SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SATF-65ND SSED-24: offset tungsten electrode support Ø 2.4 mm offset range 4 to 7.5 mm SAFS-210 : Wire harness extension 10 M SMN65-XX Clamping jaws Ø in mm SATF65ND-A001 Window for SATF-65ND and MI SAGC-121 : SATF-40 / SATF-65 / SATF-115 Handler SCE16-XX : Ø 1,6 mm SCE24-XX : Ø 2,4 mm

64 INLINE WELDING SATF-115ND ø25 - ø115 mm ø1'' - ø4,5'' - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode Weight: 9.9 kg / 22 lbs - All machines are delivered in their individual case Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table ) Adjustable spring- loaded system: to account for tube "out of round" References Accessories Consumables SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SATF-115ND SSED-24: offset tungsten electrode support Ø 2.4 mm offset range 4 to 7.5 mm SAFS-210 : Wire harness extension 10 M SMN115-XX Clamping jaws Ø in mm SATF115ND-A001 Window for SATF-115ND and MI SAGC-121 : SATF-40 / SATF-65 / SATF-115 Handler SCE16-XX : Ø 1,6 mm SCE24-XX : Ø 2,4 mm

65 INLINE WELDING SATF-40MI ø6 - ø40 mm ø0,25'' - ø1,5'' - Water cooled including outer body - Stainless steel collets - Spring mounted axis and spring closing lever: takes in account ovality of the tubes - Tool free fixing of the collets through a push button: no risk to loose keys.. - Upper window available as an option. - Dedicated to thin wall tubing up to 2,5 mm (3 mm in some cases) - Able to be used under 120A, 100% duty cycle - Narrow head: 41 mm total, 20,5 mm from electrode to the outside - Safety Cable integrated in the hosing to avoid pulling on the inner cables Weight : 8,8 Kg / 19 lbs - DC Motor with Tachy - All connectors directly compatible with AMI power sources - Compatible with AMI Auto calibration feature Toll-free jaw fitting All machines are delivered in their individual case Compatible with AMI power sources ( 205, 207 models ) Connectors compatible for AMI power sources References Accessories Consumables SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SATF-40MI SSED-24: offset tungsten electrode support Ø 2.4 mm offset range 4 to 7.5 mm SAFS-210 : Wire harness extension 10 M SMN40-XX Clamping jaws Ø in mm SATF40ND-A001 Window for SATF-40ND and MI SAGC-121 : SATF-40 /65 /115 Handler SCE16-XX : Ø 1,6 mm SCE24-XX : Ø 2,4 mm

66 INLINE WELDING SATF-65MI ø6 - ø65 mm ø0,25'' - ø2,5'' - Water cooled including outer body - Stainless steel collets - Spring mounted axis and spring closing lever: takes in account ovality of the tubes - Tool free fixing of the collets through a push button: no risk to loose keys.. - Upper window available as an option. - Dedicated to thin wall tubing up to 2,5 mm (3 mm in some cases) - Able to be used under 120A, 100% duty cycle - Narrow head: 41 mm total, 20,5 mm from electrode to the outside - Safety Cable integrated in the hosing to avoid pulling on the inner cables Weight : 9,2 Kg / 20 lbs - DC Motor with Tachy - All connectors directly compatible with AMI power sources - Compatible with AMI Auto calibration feature Toll-free jaw fitting All machines are delivered in their individual case Compatible with AMI power sources ( 205, 207 models ) Connectors compatible for AMI power sources References Accessories Consumables SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SATF-65MI SSED-24: offset tungsten electrode support Ø 2.4 mm offset range 4 to 7.5 mm SAFS-210 : Wire harness extension 10 M SMN65-XX Clamping jaws Ø in mm SATF65ND-A001 Window for SATF-65ND and MI SAGC-121 : SATF-40 / SATF-65 / SATF-115 Handler SCE16-XX : Ø 1,6 mm SCE24-XX : Ø 2,4 mm

67 INLINE WELDING SATF-115MI ø25 - ø115 mm ø1'' - ø4,5'' - Water cooled including outer body - Stainless steel collets - Spring mounted axis and spring closing lever: takes in account ovality of the tubes - Tool free fixing of the collets through a push button: no risk to loose keys.. - Upper window available as an option. - Dedicated to thin wall tubing up to 2,5 mm (3 mm in some cases) - Able to be used under 120A, 100% duty cycle - Narrow head: 41 mm total, 20,5 mm from electrode to the outside - Safety Cable integrated in the hosing to avoid pulling on the inner cables Weight : 9,9 Kg / 22 lbs - DC Motor with Tachy - All connectors directly compatible with AMI power sources - Compatible with AMI Auto calibration feature Toll-free jaw fitting All machines are delivered in their individual case Compatible with AMI power sources ( 205, 207 models ) Connectors compatible for AMI power sources References Accessories Consumables SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SATF-115MI SSED-24: offset tungsten electrode support Ø 2.4 mm offset range 4 to 7.5 mm SAFS-210 : Wire harness extension 10 M SMN115-XX Clamping jaws Ø in mm SATF115ND-A001 Window for SATF-115ND and MI SAGC-121 : SATF-40 / SATF-65 / SATF-115 Handler SCE16-XX : Ø 1,6 mm SCE24-XX : Ø 2,4 mm

68 INLINE WELDING Accessories SATF40ND-A001 SATF65ND-A001 SKIF-01 SATF115ND-A001 VAL-CO05 SKIB-01 SMN40-xx SMN65-xx SMN115-xx SAFS-210 SSED SAGC-121 Accessories Consumables Options VAL-CO05 : Protection case for shipping and storage for SATF models SAFS-210 : Wire harness extension 10 M SKIB-01: gas protection kit - plugs Ø 6 to 41 mm SKIF-01: gas protection kit - membranes Ø 40 to 120 mm SAGC-121 : SATF-40 / SATF-65 / SATF-115 Handler for ND and MI models SMN40-XX Clamping jaws Ø in mm SMN65-XX Clamping jaws Ø in mm SMN115-XX Clamping jaws Ø in mm SSED-16: offset tungsten electrode support Ø 1.6 mm offset range 4 to 7.5 mm SSED-24: offset tungsten electrode support Ø 2.4 mm offset range 4 to 7.5 mm SATFxxxND-A001 : Window for SATF-xxx ND and MI models

69 INLINE WELDING On demand Tube-Elbow configuration : - tube side : standard jaws - elbow side : adaptative jaws + protective inox shields Tube-Ferrule configuration : - tube side : standard jaws - ferrule side : special jaws Ferrule-Elbow-Ferrule configuration ( big diameter ): - elbow side : adaptative jaws + protective inox shields - ferrule side : special jaws

70 INLINE WELDING On demand Ferrule-Elbow-Ferrule configuration ( small diameter ): - elbow side : adaptative jaws + protective inox shields - ferrule side : special jaws Tube-Union configuration : - tube side : standard jaws - union side : special jaws For any other special setup, please contact us. We will design the required special solution

71 INLINE WELDING Dimensions A B C mm mm mm Ø min Ø max SATF-40ND mm 40 mm 8,8 kg < 70 db SATF-65ND mm 65 mm 9,2 kg < 70 db SATF-115ND mm 115 mm 9,9 kg < 70 db A B C mm mm mm Ø min Ø max SATF-40MI mm 40 mm 8,8 kg < 70 db SATF-65MI mm 65 mm 9,2 kg < 70 db SATF-115MI mm 115 mm 9,9 kg < 70 db

72 INLINE WELDING SATO-40E0x ø10 - ø40 mm ø0,4'' - ø1,7'' - Water cooled welding torch - Mechanical Roll tracking: insures electrode distance without marking the tube - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Low rotating free space around the tube: 70 mm radius from center of tube Weight: 3,2Kg / 7 lbs (without cables) - Very compact design - Two motor positions available Torch angle adjustment: welding under flange or short T angle SATO-xxxE01: Straight motor Symmetrical clamping SATO-xxxE02 : Angle transmission motor Symmetrical clamping Mechanical roll tracking: Constant arc voltage and roll tracking avoiding marking the tubes References Accessories Consumables SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SATO-40E01 SATO-40E02 SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SATOB-02B : Wire guide two axis for SATO SKTO-01 : Exchange kit for open head torch diam 1.6 and 2.4mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

73 INLINE WELDING SATO-80E0x ø19 - ø80 mm ø0,75'' - ø3'' - Water cooled welding torch - Mechanical Roll tracking: insures electrode distance without marking the tube - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Low rotating free space around the tube: 90 mm radius from center of tube Weight: 3,4 Kg / 7 lbs (without cables) Very compact design Two motor positions available Torch angle adjustment: welding under flange or short T angle SATO-xxxE01: Straight motor Symmetrical clamping SATO-xxxE02 : Angle transmission motor Symmetrical clamping Mechanical roll tracking: Constant arc voltage and roll tracking avoiding marking the tubes References Accessories Consumables SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SATO-80E01 SATO-80E02 SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SATOB-02B : Wire guide two axis for SATO SKTO-01 : Exchange kit for open head torch diam 1.6 and 2.4mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

74 INLINE WELDING SATO-115E0x ø19 - ø115 mm ø0,75'' - ø4,5'' - Water cooled welding torch - Mechanical Roll tracking: insures electrode distance without marking the tube - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Low rotating free space around the tube: 112 mm radius from center of tube Weight: 6,8 Kg / 15 lbs (without cables) Very compact design Two motor positions available Torch angle adjustment: welding under flange or short T angle SATO-xxxE01: Straight motor Symmetrical clamping SATO-xxxE02 : Angle transmission motor Symmetrical clamping Mechanical roll tracking: Constant arc voltage and roll tracking avoiding marking the tubes References Accessories Consumables SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SATO-115E01 SATO-115E02 SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SATOB-02B : Wire guide two axis for SATO SKTO-01 : Exchange kit for open head torch diam 1.6 and 2.4mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

75 INLINE WELDING SATO-170E0x ø25 - ø170 mm ø1'' - ø6,625'' - Water cooled welding torch - Mechanical Roll tracking: insures electrode distance without marking the tube - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Low rotating free space around the tube: 147 mm radius from center of tube Weight: 8,3 Kg / 18 lbs (without cables) Very compact design Two motor positions available Torch angle adjustment: welding under flange or short T angle SATO-xxxE01: Straight motor Symmetrical clamping SATO-xxxE02 : Angle transmission motor Symmetrical clamping Mechanical roll tracking: Constant arc voltage and roll tracking avoiding marking the tubes References Accessories Consumables SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SATO-170E01 SATO-170E02 SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SATOB-02B : Wire guide two axis for SATO SKTO-01 : Exchange kit for open head torch diam 1.6 and 2.4mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

76 INLINE WELDING SATO-220E0x ø38 - ø220 mm ø1,5'' - ø8,625'' - Water cooled welding torch - Mechanical Roll tracking: insures electrode distance without marking the tube - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Low rotating free space around the tube: 175 mm radius from center of tube Weight: 9,9 Kg / 22 lbs (without cables) Very compact design Two motor positions available Torch angle adjustment: welding under flange or short T angle SATO-xxxE01: Straight motor Symmetrical clamping SATO-xxxE02 : Angle transmission motor Symmetrical clamping Mechanical roll tracking: Constant arc voltage and roll tracking avoiding marking the tubes References Accessories Consumables SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SATO-220E01 SATO-220E02 SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SATOB-02B : Wire guide two axis for SATO SKTO-01 : Exchange kit for open head torch diam 1.6 and 2.4mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

77 INLINE WELDING SATO-115E3x ø19 - ø115 mm ø0,75'' - ø4,5'' - Ideal for Multi-pass welding up to 12,7 mm thickness - AVC regulation of the position of the electrode (20 mm stroke) - Oscillation OSC capacity: 20 mm stroke - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Low rotating free space around the tube: 112 mm radius from center of tube - Compatible with AVC/OSC module upgrade Weight: 8,8 Kg / 19 lbs (without cables) Very compact design Two motor positions available Oscillation stroke :20mm AVC stroke : 20 mm Max speed: 15mm/s SATO-xxxE31: Straight motor Symmetrical clamping SATO-xxxE32 : Angle transmission motor Symmetrical clamping SOAF: AVC/OSC modulde References Accessories Consumables SATO-115E31 SATO-115E32 SAFS-310 : Wire harness extension 10 M SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

78 INLINE WELDING SATO-170E3x ø25 - ø170 mm ø1'' - ø6,625'' - Ideal for Multi-pass welding up to 12,7 mm thickness - AVC regulation of the position of the electrode (20 mm stroke) - Oscillation OSC capacity: 20 mm stroke - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Rotating free space around the tube: 147 mm radius from center of tube - Compatible with AVC/OSC module upgrade Weight: 10Kg / 22 lbs (without cables) Very compact design Two motor positions available Oscillation stroke :20mm AVC stroke : 20 mm Max speed: 15mm/s SATO-xxxE31: Straight motor Symmetrical clamping SATO-xxxE32 : Angle transmission motor Symmetrical clamping SOAF: AVC/OSC modulde References Accessories Consumables SATO-170E31 SATO-170E32 SAFS-310 : Wire harness extension 10 M SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

79 INLINE WELDING SATO-220E3x ø38 - ø220 mm ø1,5'' - ø8,625'' - Ideal for Multi-pass welding up to 12,7 mm thickness - AVC regulation of the position of the electrode (20 mm stroke) - Oscillation OSC capacity: 20 mm stroke - Symmetrical quick clamping through lever - Motor with encoder : allows for tungsten electrode startup at all angles and a wide range of diameters - Axial adjustment of the electrode - Low rotating free space around the tube: 175 mm radius from center of tube - Compatible with AVC/OSC module upgrade Weight: 13Kg / 29 lbs (without cables) Very compact design Two motor positions available Oscillation stroke :20mm AVC stroke : 20 mm Max speed: 15mm/s SATO-xxxE31: Straight motor Symmetrical clamping SATO-xxxE32 : Angle transmission motor Symmetrical clamping SOAF: AVC/OSC modulde References Accessories Consumables SATO-220E31 SATO-220E32 SAFS-310 : Wire harness extension 10 M SKIB-01: gas protection kit - plugs Ø6 to 41 mm SKIF-01: gas protection kit - membranes Ø40 to 120 mm SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm

80 INLINE WELDING Accessories SKIB-01 SKIF-01 SKTO-01 SKTD-02 SKTD-01 SATOB-02B VAL-CO05 VAL-CO06 SAFS-310 SAFS-210 SADF2 Accessories VAL-CO05 : Protection case for shipping and storage for all SATO-xxx-E0x except SATO-220E0x VAL-CO06 : Protection case for shipping and storage for all SATO-xxx-E3x and SATO-220E0x SKIB-01: gas protection kit - plugs Ø 6 to 41 mm SKIF-01: gas protection kit - membranes Ø 40 to 120 mm SKTD-01 : Exchange kit straight torch diameter 1.6mm SKTD-02 : Exchange kit straight torch diameter 2.4, mm SKTO-01 : Exchange kit for open head torch diam 1.6 and 2.4mm ( SATO-xxxE0x ) Options SADF-2: wire feeder for SC and SATO (without wire spool) SATOB-02B : Wire guide two axis for SATO SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SAFS-310 : extension bundle 10m for SATO-xxxE3x ( AVC-OSC- WIRE )

81 INLINE WELDING Dimensions SATO-xxxE01 SATO-xxxE02 OD Min mm OD Max mm A mm B mm C mm D mm E mm F mm G mm H mm I mm SATO-40 6,0 40, Ø SATO-80 19,0 80, Ø SATO ,0 115, Ø SATO ,0 170, Ø SATO ,0 220, à Ø

82 INLINE WELDING Dimensions SATO-xxxE31 SATO-xxxE32 Price OD Min mm OD Max mm A mm B mm C mm D mm E mm F mm G mm H mm I mm SATO-115E3X 19,0 115, , ,5-220,5 SATO-170E3X 25,0 170, , ,5-220,5 SATO-220E3X 38,0 220, , ,5-220,5

83 TUBE TO TUBESHEET

84 TUBE SHEET RANGE SATP-80 ø10 - ø80 mm ø0,4'' - ø3'' - Rotating joint for gas, current and cooling - Water-cooled tilt head - Carriage for head and wire adjustment - Integrated rotating wire feeder (Ø 0.8 mm) - Wire feed speed from 0 to 1.5 m/min - Power factor: 200 A, 100% Weight: kg / 17 lbs without wire spool kg / 19 lbs without wire spool, Water-cooled tilt head with adjustable wire Wire supply rotates along with head Driven by AXXAIR power source ( cf compatibility table ) References Options Consummables SATP-80 Additional gas chamber Pneumatic clamping SCE16-50 : Ø 1,6 mm SCE24-50 : Ø 2,4 mm pied de page

85 Accessories SATP-B1 : Centering cartridge group 1 Centering mandril SATP-M11 SATP-M12 SATP-M13 SATP-M14 SATP-M15 SATP-M16 9,8 to 10,3 mm 10,3 to 10,8 mm 10,8 to 11,3 mm 11,3 to 11,8 mm 11,8 to 12,3 mm 12,3 to 13,0 mm SATP-B2 : Centering cartridge group 2 Centering mandril SATP-M21 SATP-M22 SATP-M23 SATP-M24 SATP-M25 SATP-M26 SATP-M27 SATP-M28 12,8 to 14,0 mm 13,8 to 15,0 mm 14,8 to 16,0 mm 15,8 to 17,0 mm 16,8 to 18,0 mm 17,8 to 19,0 mm 18,8 to 20,5 mm 19,8 to 22,5 mm SATP-M29 22,3 to 24,5 mm SATP-B3 : Centering cartridge group 3 SATP-B01 - B04 Centering mandril SATP-M30 SATP-M31 SATP-M32 SATP-M33 SATP-M34 SATP-M35 SATP-M36 SATP-M37 SATP-M38 SATP-M39 24,5 to 27,0 mm 26,5 to 29,0 mm 28,5 to 31,0 mm 30,5 to 33,0 mm 32,5 to 36,0 mm 35,5 to 39,0 mm 38,5 to 42,0 mm 41,5 to 45,0 mm 44,5 to 48,0 mm 47,5 to 51,0 mm SATP-B04 : Centering cartridge group 4 SATP-M40 SATP-M41 SATP-M42 50,5 to 54,0 mm 53,5 to 58,0 mm 57,5 to 62,0 mm SATP-MXX Centering mandril SATP-M43 SATP-M44 SATP-M45 SATP-M46 61,5 to 66,0 mm 65,5 to 70,0 mm 69,5 to 74,0 mm 73,5 to 78,0 mm pied de page

86 Dimensions pied de page

87 POWER SOURCES

88 POWER SOURCES SASL-16x 220V - 115V SASL161 : 115V AC single-phase + earth, 50/60Hz, Imax=20A, Max. current 120 A, Power factor: 120A-60%,100A -100% SASL 160 : 230V AC single-phase + earth, 50/60Hz, Imax=26A, Max. current 165 A, Power factor: 100 A, 100% - Ideal for on-site work - welding data acquisition system Supplied with a memory card with 200 programs, 20 levels each Weight: - SASL-16xTRA: 15 kg / 33 lbs - SASL-16xTF : 25 kg / 55 lbs SD Flash card with 200 programs per card 5.7" multi-language, colour touch screen Integrated printer References Accessories Consumables 220V : : SASL-160TRA SASL-160T SASL-160TF 115V : SASL-161TRA SASL-161T SASL-161TF SACF-020: Memory card SALCF-020: memory card reade SACW-C006: Coolant SIMP-02: printer spool for SASL

89 POWER SOURCES SASL A - Autoline - Orbital welding autoline, PFC compatible110v -230V, 50/60hz, imax =25A (220V), 30A(110V) - Integrated cooler: 1400 W cooling capacity with 1L/min - Cooling safety system: flow rate, pressure - Max. current 210 A - Power factor: 160 A, 100% - Assistance for programs creation : welding passes presentation with autocomputing multipasses - Supplied with a memory card with 200 programs, 20 levels each 5.7" colour touch screen remote control. Secure, multi-lingual access Easy-to-use touch screen features parameter calculation Safe cooling to protect heads (flow rate, level, pressure) References Accessories Consumables SASL-200MPEF SASL-200MPF SASL-200MPAOF SAGC-300: power source trolley SACF-020: Memory card SALCF-020: memory card reader SACW-C006: Coolant SIMP-02: printer spool for SASL

90 POWER SOURCES SASL A - 400V - Orbital welding power source, 400V +/15% 3 phases + earth, 50/60Hz,Imax = 24A - Integrated cooler: 1400 W cooling capacity with 1L/min - Cooling safety system: flow rate, pressure - Max. current 300 A - Power factor: 210 A, 100% - Assistance for programs creation : welding passes presentation with autocomputing multipasses - Supplied with a memory card with 200 programs, 20 levels each 5.7" colour touch screen remote control. Secure, multi-lingual access Drives up to 4 shafts, depending on the version: wire feed, AVC, OSC and wire Integrated printer References Accessories Consumables SASL-300MPEF SASL-300MPF SASL-300MPAOF SAGC-300: power source trolley SACF-020: Memory card SALCF-020: memory card reader SACW-C006: Coolant SIMP-02: printer spool for SASL

91 Accessories SACW-Co06 SAGC-300 SADF2 SIMP-02 SALCF-020 SACF-020 SADDD-15 Accessories Accessories SACW-Co06: cooling fluid SAGC-300 : trolley for SASL-300/200 SADF2 : External Wire feeder SACF-020: flash card with software SALCF-020: Flash card reader SIMP-02: printer paper for SASL SADDD-15 : Dual flow meter

92 Compatibility Compatibility table with heads and accessories SADF2 SAGC-300 SASL-160/161 TRA N N SASL-160/161 T N N SASL-160/161 TF O N SASL-200MPEF O O SASL-200MPF O O SASL-200MPAOF O O SASL-300MPEF O O SASL-300MPF O O SASL-300MPAOF O O

93 SPECIAL DESIGN

94 SPECIAL DESIGN SPECIAL Our special machine department can satisfy any request with solutionsthat you won't find in our standard catalogue. 90% of these machines capitalize on our knowledge of cutting, bevelling or orbital TIG welding systems. Areas of application vary, and include: - specific machines for cutting thin titanium - machines for cutting tubes on plates for the nuclear industry - remote-controlled machines for disassembly of piping in the nuclear industry - cutting machines for manufacturing: complete and fully automated line - carbide orbital cutting machines for manufacturing Ø super-compact welding heads - etc. Semi-automatic TITANIUM cutting line Orbital cutting line for Big Diameter/thin wall TITANIUM tubes

95 SPECIAL DESIGN SPECIAL Production orbital cutting with dual blades (low package) Full automatic orbital TITANIUM cutting line (high Precision)

96 SPECIAL DESIGN SPECIAL Cutting of inconel tube on Tube Sheet of a heat Exchanger Inside orbital cutting of a man's hole Stainless tank

97 SPECIAL DESIGN SPECIAL Orbiatl welding for production with dual head System Orbital cutting bevelling and welding line on rails for pipe welding

98 SPECIAL DESIGN SPECIAL Orbital welding of "SCHOTT" tubes for Solar power station Orbital welding unit with parts holding avoiding tacking

99 SPECIAL DESIGN SPECIAL Orbital welding head low package with AVC/OSC Orbital welding head low package with AVC/OSC