Instrucciones / Instructions / Anweisungen / Instructions UNIKGLASS+ AIR KBS+

Transcription

1 Instrucciones / Instructions / nweisungen / Instructions UNIKGLSS+ IR KBS+

2 ÍNDICE / INDEX IMGEN GENERL GENERL VIEW 3 INFORMCIÓN DE SEGURIDD SFETY INFORMTION 4 HERRMIENTS NECESRIS 3 REQUIRED TOOLS 4 INFORMCIÓN GENERL 4 GENERL INFORMTION 4 ELEMENTOS DE L INSTLCIÓN 5 ITEMS OF INSTLLTION 5 GMS DE INSTLCIÓN 6 INSTLLTION RNGES 6 7 G Longitud del perfil m Length of the track 78 3/4 6 G Longitud del perfil,5 m Length of the track 98 3/8 7 G3 Longitud del perfil 3 m Length of the track 8 /8 8 MONTJE PERFIL SUPERIOR UPPER TRCK MOUNTING 9 COLOCCIÓN DE MORDZS 8 CLMP INSTLL COLOCCIÓN DEL GUIDOR GUIDE INSTLL 0 COLOCCIÓN DE L PUERT DOOR MOUNTING REGULCIÓN DE L LTUR HEIGHT DJUSTMENT NTIDESCBLGMIENTO NTI-JUMP 3 COLOCCIÓN DE LOS TOPES INFERIORES BOTTOM STOPPERS INSTLL 4 COLOCCIÓN DE LOS KBS+ KBS+ INSTLL 3 COLOCCIÓN DE L GLERÍ 5 VLNCE INSTLL 4 COLOCCIÓN DE LS TPS LTERLES 6 END CP INSTLL 4 PG. 0 Dimensions in mm - Inches are approximate

3 IMGEN GENERL / GENERL VIEW 03

4 INFORMCIÓN DE SEGURIDD / SFETY INFORMTION El vidrio de la puerta corredera debe cumplir con las normas: STM C036-6 Standard Specification for Flat Glass STM C048-e Standard Specification for Heat- Strengthened and Fully Tempered Glass STM C7-4 Standard Specification for Laminated rchitectural Flat Glass La tolerancia admitida para el vidrio de la puerta corredera en espesores de / es de.9mm a.70mm. Sliding glass door must be in compliance with the following regulations: STM C036-6 Standard Specification for Flat Glass STM C048-e Standard Specification for Heat- Strengthened and Fully Tempered Glass STM C7-4 Standard Specification for Laminated rchitectural Flat Glass cceptable / glass thickness range must be within.9mm and.70mm. 3 HERRMIENTS NECESRIS / REQUIRED TOOLS LLVE 8 KEY 8 PZ (M4) mm TORX T8 TORX T0 TORX T5 TORX T30 4 INFORMCIÓN GENERL / GENERL INFORMTION 00 kg 0 lbs 0 mm mm 3/8 / 0 mm (3/8 ) mm (/ ) 6 mm (5/8 ) H H + 7 mm (/6 ) mm (/6 ) F = 6 mm ( ) mm (3/6 ) mm (3/6 ) 0- mm (3/8 -/ ) 8±3 mm (5/6 ±/8 ) 8±3 mm (5/6 ±/8 ) H H + mm (3/6 ) H H + 3 mm ( /4 ) 5 mm (3/6 ) 5 mm (9/6 ) F = 30 mm ( 3/6 ) F = 40 mm ( 9/6 ) mm (3/6 ) 0- mm (3/8 -/ ) 0- mm (3/8 -/ ) 8±3 mm (5/6 ±/8 ) 66 mm ( 5/8 ) 6,5 mm ( 7/6 ) NCHO MÍN. HOJ CORREDER: 800 mm MIN. WIDTH SLIDING DOOR: 3 / LTUR DEL VIDRIO / GLSS HEIGHT plicar la fórmula para determinar la altura del cristal según el tipo de instalación pply the formula to determine the glass height according to the type of installation VIDRIO FIJO 0 mm / FIXED GLSS 3/8 VIDRIO FIJO mm / FIXED GLSS / VIDRIO FIJO 6 mm / FIXED GLSS 5/8 04

5 5 ELEMENTOS DE L INSTLCIÓN / ITEMS OF INSTLLTION INST. UNIKGLSS+ IR KBS+ KIT UNIKGLSS+ IR KBS+ VIDRIO FIJO 0- mm FIXED GLSS 3/8 &/ SILVER Ref G m (78 3/4 ) Ref G,5 m (98 3/8 ) Ref G3 3 m (8 /8 ) BLCK Ref G m (78 3/4 ) Ref G,5 m (98 3/8 ) Ref G3 3 m (8 /8 ) VIDRIO FIJO 6 mm FIXED GLSS 5/8 SILVER Ref G m (78 3/4 ) Ref G,5 m (98 3/8 ) Ref G3 3 m (8 /8 ) BLCK Ref G m (78 3/4 ) Ref G,5 m (98 3/8 ) Ref G3 3 m (8 /8 ) PERFILES TRCKS JUEGO DE CCESORIOS SET OF CCESSORIES Mordaza Clamp x Distanciadores mordaza Clamp spacers BOLS / BG 3 x4 x4 Tapas laterales perfil superior End caps for upper track BOLS / BG 7 x KBS+ Clips conexión perfiles superiores Clips for upper tracks connections BOLS / BG x0 x Guiador Guide BOLS / BG 4 x nclajes a Vidrio Fijo Fixed Glass nchors BOLS / BG 8 G m (78 3/4 ) x6 G,5 m (98 3/8") x6 G3 3 m (8 /8 ) x8 Tornillos nclaje a Vidrio Fijo Screws for Fixed Glass nchor BOLS / BG nclajes KBS+ KBS + anchor pieces BOLS / BG 5 Instrucciones Instructions x8 Vidrio 0 mm Glass 3/8 x4 BOLS / BG x8 BOLS / BG x8 Vidrio mm Glass / Vidrio 6 mm Glass 5/8 x4 Topes inferiores Bottom stoppers BOLS / BG 6 x x x4 05

6 6 GMS DE INSTLCIÓN / INSTLLTION RNGES GM Longitud del perfil m NO CORTR EL PERFIL Length of the track 78 3/4 DO NOT CUT THE TRCK 3 mm (/8 ) 3 mm (/8 ) L 6 mm (/4 ).000 mm (78 3/4 ) 5 mm ( ) 5 mm ( ) C F B E D Min. 35 mm ( 3/8 ) Min. 70 mm (6 3/4 ) L 60 mm ( 3/8 ) L 60 mm ( 3/8 ) 45 mm ( 3/4 ) 60 mm (6 5/6 ) Vidrio fijo 0- mm Fixed glass 3/8 & / Vidrio fijo 6 mm Fixed glass 5/8 = 390 mm (5 3/8 ) C = 337 mm (3 9/3 ) E = 50 mm ( 3/3 ) F (EN PRTDO 4) (GO TO CHPTER 4) L: De 80 mm hasta 970 mm L: From (3 5/6 ) up to (38 3/6 ) B = L 733 mm (8 7/8 ) D = 387 mm (5 /4 ) B L: De 860 mm hasta 970 mm L: From (33 7/8 ) up to (38 3/6 ) B = L 733 mm (8 7/8 ) D = 387 mm (5 /4 ) B 45º 45º Solape mínimo de 50 mm en el guiador. Minimum overlap of at the bottom guide. 90º Ø 0 mm Ø 3/6 Ø mm Ø / Ø 4 mm Ø 9/6 90º Ø 8 mm Ø 5/3 Ø 6 mm Ø 5/8 Ø 8 mm Ø 5/3 segurar la posición de los topes inferiores. Make sure the position of both bottom stoppers. 06

7 GM Longitud del perfil,5 m NO CORTR EL PERFIL Length of the track 98 3/8 DO NOT CUT THE TRCK 3 mm (/8 ) 3 mm (/8 ) L 6 mm (/4 ).500 mm (98 3/8 ) 5 mm ( ) 5 mm ( ) E C F B D Min. 35 mm ( 3/8 ) Min. 70 mm (6 3/4 ) L 60 mm ( 3/8 ) L 60 mm ( 3/8 ) 45 mm ( 3/4 ) 60 mm (6 5/6 ) Vidrio fijo 0- mm Fixed glass 3/8 & / Vidrio fijo 6 mm Fixed glass 5/8 = 490 mm (9 5/6 ) C = 437 mm (7 7/3 ) E = 50 mm ( 3/3 ) F (EN PRTDO 4) (GO TO CHPTER 4) L: De.00 mm hasta.0 mm L: From (40 3/6 ) up to (48 ) B = L 933 mm (36 3/4 ) D = 487 mm (9 3/6 ) B L: De.060 mm hasta.0 mm L: From (4 3/4 ) up to (48 ) B = L 933 mm (36 3/4 ) D = 487 mm (9 3/6 ) B 45º 45º Solape mínimo de 50 mm en el guiador. Minimum overlap of at the bottom guide. 90º Ø 0 mm Ø 3/6 Ø mm Ø / Ø 4 mm Ø 9/6 90º Ø 8 mm Ø 5/3 Ø 6 mm Ø 5/8 Ø 8 mm Ø 5/3 segurar la posición de los topes inferiores. Make sure the position of both bottom stoppers. 07

8 GM 3 Longitud del perfil 3 m NO CORTR EL PERFIL Length of the track 8 /8 DO NOT CUT THE TRCK 3 mm (/8 ) 3 mm (/8 ) L 6 mm (/4 ) mm (8 /8 ) 30 mm ( 3/6 ) 30 mm ( 3/6 ) C F B E D Min. 35 mm ( 3/8 ) Min. 70 mm (6 3/4 ) L 60 mm ( 3/8 ) L 60 mm ( 3/8 ) 45 mm ( 3/4 ) 60 mm (6 5/6 ) Vidrio fijo 0- mm Fixed glass 3/8 & / Vidrio fijo 6 mm Fixed glass 5/8 = 40 mm (6 7/3 ) C = 367 mm (4 7/6 ) E = 50 mm ( 3/3 ) F (EN PRTDO 4) (GO TO CHPTER 4) L: De.300 mm hasta.470 mm L: From (5 3/6 ) up to (57 7/8 ) B = L.3 mm (47 3/4 ) D = 47 mm (6 3/3 ) B L: De.340 mm hasta.470 mm L: From (5 3/4 ) up to (57 7/8 ) B = L.3 mm (47 3/4 ) D = 47 mm (6 3/3 ) B 45º 45º Solape mínimo de 50 mm en el guiador. Minimum overlap of at the bottom guide. 90º Ø 0 mm Ø 3/6 Ø mm Ø / Ø 4 mm Ø 9/6 90º Ø 8 mm Ø 5/3 Ø 6 mm Ø 5/8 Ø 8 mm Ø 5/3 segurar la posición de los topes inferiores. Make sure the position of both bottom stoppers. 08

9 7 MONTJE PERFIL SUPERIOR UPPER TRCK MOUNTING MONTJE NCLJES VIDRIO FIJO / FIXED GLSS NCHORS MOUNTING Vidrio fijo 0- mm Fixed glass 3/8 &/ BOLS / BG 8 3 Vidrio fijo 6 mm Fixed glass 5/8 BOLS / BG 8 MONTJE PERFIL SUPERIOR / UPPER TRCK MOUNTING Vidrio fijo 0- mm Fixed glass 3/8 &/ Tornillos nclaje a Vidrio Fijo Screws for Fixed Glass nchor BOLS / BG Vidrio 0 mm Glass 3/8 TX Hexalobular T5 3 BOLS / BG Vidrio mm Glass / Vidrio fijo 6 mm Fixed glass 5/8 Tornillos nclaje a Vidrio Fijo Screws for Fixed Glass nchor BOLS / BG Vidrio 6 mm Glass 5/8 TX Hexalobular T5 3 09

10 8 COLOCCIÓN DE MORDZS / CLMP INSTLL Vidrio 0 mm Glass 3/8 a b Vidrio mm Glass / a b a a BOLS / BG 3 x4 x4 b b 4 mm ( 5/8 ) 4 mm ( 5/8 ) TX Hexalobular T30 Nm 8.85ft-lbs 9 COLOCCIÓN DEL GUIDOR / GUIDE INSTLL V Min. V + 50 mm ( ) 3 mm (/ ) 0 mm (0 ) B 3 mm (/ ) Vidrio corredero 0 mm Sliding glass 3/8 B BOLS / BG 4 60 mm ( 3/8 ) x Vidrio corredero mm Sliding glass / 60 mm ( 3/8 ) 0

11 0 COLOCCIÓN DE L PUERT / DOOR MOUNTING 3 REGULCIÓN DE L LTUR / HEIGHT DJUSTMENT Regulación de la altura Height adjustment ± 3 mm (/8 ) ± 3 mm (/8 ) Bloqueo regulación de la altura Height adjustment lock 8±3 mm (5/6 ±/8 ) NTIDESCBLGMIENTO / NTI-JUMP 0 mm (0 ),5 mm (/6 ) 360º x

12 3 COLOCCIÓN DE LOS TOPES INFERIORES / BOTTOM STOPPERS INSTLL 3 mm (/ ) 5 mm (3/6 ) 40 mm ( 9/6 ) 45 mm ( 3/4 ) 6 juste final mediante el coliso Final adjustment through the slotted hole

13 4 COLOCCIÓN DE LOS KBS+ / KBS+ INSTLL 8 3

14 5 COLOCCIÓN DE L GLERÍ / VLNCE INSTLL BOLS / BG x0 6 COLOCCIÓN DE LS TPS LTERLES END CP INSTLL 7 4

15 Limited Warranty. () KLEIN US, Inc. warrants to the immediate customer only that the delivered goods are free of original material defects and defects in workmanship for a period of five years from date of receipt by the customer. ll warranty claims are subject to inspection by KLEIN US, Inc. prior to KLEIN US, Inc. providing a remedy for the warranty claim. () Excluded from this warranty are products, or parts of them, subject to wear through use, and products which have not been used in accordance with their technical characteristics and for purposes for which they have not been designed, being understood that the products sold by KLEIN US, Inc. are designed exclusively for the enclosure of spaces, with the enclosing running precisely in the longitudinal sense. (3) lso excluded from this warranty are those products in which the limits expressed in the product documentation have been exceeded for weights and dimension supported by the product, and/or recommendations for the qualities of the material to which the products sold by KLEIN US, Inc. are fixed have not been complied with. (4) KLEIN US, Inc. makes no warranty with respect to the following: a) materials not manufactured by KLEIN US, Inc. or any other group companies, the use of which is suggested by KLEIN US, Inc. or any other group companies general recommendations, application or installation procedures or otherwise; b) ll display items sold by KLEIN US, Inc. to the Customer (5) Warranties are exclusive, and in lieu of all other warranties, express or implied, written or oral, including but not limited to, any implied warranty of merchantability or fitness for any particular purpose. KLEIN US, Inc. does not assume, nor authorize any representative or other person to assume for it, any obligation or liability other than as expressly set forth herein. (6) For the warranty to take effect, the defective product must be sent with the voucher or purchase invoice to the Company, which will then process to repair or replace the product, at its choice. (7) KLEIN US, Inc. will accept no other responsibility than the repair or replacement of the product and only for the purchaser of the product, so the rights granted by this warranty may not be assigned to third parties. Extent of liability. () In case of a breach of contractual obligations, defective deliveries, tortuous acts or producers liability, KLEIN US, Inc. shall only be obliged to compensate damages or expenses subject to any other contractual or statutory conditions for liability if it acted intentionally or with gross negligence or in cases of minor negligence, if such negligence results in the breach of an essential contractual duty (a duty the breach of which puts the fulfillment of the purpose of the contract at risk). The liability of KLEIN US, Inc. shall be limited to typical damages which are foreseeable at the time of the conclusion of the contract. () The liability of KLEIN US, Inc. for losses caused by late delivery due to minor negligence shall be limited to 5% of the agreed purchase price. (3) The exclusions and limitations of liability in sections () () shall not apply in cases where KLEIN US, Inc. has maliciously failed to disclose a defect, in case of damages resulting from death, injury to health or physical injury where the laws on product liability impose overriding liabilities which cannot be excluded. (4) The limitation period for claims against KLEIN US, Inc. based on whatever legal ground- is months from the date of delivery to the customer and in case of tortuous claims months from the date the customer becomes aware or would have become aware of the grounds giving rise to a claim and the liable person had he not been grossly negligence. The provisions in this section (4) shall neither apply in cases of intentional or gross negligent breaches of duty nor shall they apply in cases referred to in section 3. (3). Force Majeure. () KLEIN US, Inc. shall not be liable for any default or delay in the production or delivery of all or any goods resulting either directly or indirectly from: a) ccidents to, breakdowns, or mechanical failure of KLEIN US, Inc. or any other group companies plant, machinery or equipment, strikes or other labour troubles, labour shortages, fire, flood, wars, acts of the public enemy, acts of God, delays of suppliers, delays in transportation or lack of transportation facilities, embargos, shortages or reductions of energy sources, priorities, allocations, limitations, restrictions or other acts required or requested by federal, state or local governments or any other bureau or agency thereof; b) ny action beyond the control of the Company. () In no event shall KLEIN US, Inc. or any other group companies be liable for any consequential, special, or contingent damages arising out of KLEIN US, Inc. or any other group companies default or delay in filling the customer s order. Industrial Property Rights, Copyrights. () Industrial property rights and copyrights to any goods or material of KLEIN US, Inc. shall remain exclusively the proprietary of the Company. () In the event of claims against the customer because of breach of an industrial property right or a copyright in using the Company s deliveries or services, KLEIN US, Inc. shall be responsible to obtain the right for the customer to continue using such deliveries or services, provided that the customer gives immediate written notice of such third-party claims and KLEIN US, Inc. rights to take all appropriate defensive and out-of-court actions are reserved. If, despite such actions, it proves impossible to continue using the Company s deliveries or services under reasonable economic conditions, it shall be understood as agreed that KLEIN US, Inc. may, at its discretion, modify or replace the particular delivery or service for removal of a legal deficiency, or reship such delivery or service with refunding of the sales price previously paid to KLEIN US, Inc. less a certain deduction to account for the age of the delivery or service in question. () The customer shall have no further claims alleging infringement of industrial property or copyrights, if KLEIN US, Inc. has not either violated essential contractual duties or has intentionally or grossly negligently breached contractual duties. KLEIN US, Inc. shall have no liability where breaches of rights are caused by exploiting Company s deliveries or services in any other way than quoted by KLEIN US, Inc. or by operating these together with any other than Company s deliveries or services. 5

16 KLEIN US - Madison Street, East Rutherford, NJ Phone: Fax: Technical Support: technicalinfo@klein-usa.com PK-4