Lighting for manufacturing. All Dimensions are in mm., Tolerance ±2mm, Images are not to scale

Transcription

1 Lighting for manufacturing INDUSTRIES AND CLEANRooms

2

3

4 CONTENTs Customer Speak.06 Applications Guide.08 Product Codification.10 Ingress Protection (IP) Classification.11 Customer Benefits.13 Product INDEX A. Manufacturing INDUSTRIES A1. Highbay & Midbay Luminaires Technik.14 [WHh/ s/ m 66] Technik.14 [WHs/ m 28] Technik.16 [WHh/s/m 64] Technik.16 [WHs/m 24] Technik.17 [WHh/ s/ m 65] Technik.17 [WHs/ m 25] indibay.18 WHF 30 indibay.18 [WHP 30] WHH 98 s/ 99 s.35 A2. Lowbay Luminaires whh 91/ whh 96 S.35 WHM/ S/ H A3. Industrial Channels Saviour Plus.20 [WIF 21] Saviour Plus.20 [WIF 22] Saviour Plus.21 [WIF 23] Versa.23 [WIF 32] Versa.24 [WIF 33] Optima.27 [WIF 14140] Optima.27 [WIF 14240] Optima.28 [WIF 36140] Optima.28 [WIF 36240] WCF WCF WCF WCF

5 A4. Corrosion Proof Luminaire Capsule.31 [WIF 83] A5. Well Glass Luminaires WWP.39 55/ 56/ 57 WWM.40 52/ 53/ 54 WWs.41 55/ 56/ 57 WWG/ M/ s.42 10/ 11/ 12 WWM/ s.43 30/ 31/ 32 A6. Bulkhead Luminaires WKP WKG B. CLEANROOM Areas B1. Bottom Opening Cleanroom Luminaires VISION.50 [WIF 42] VISION.50 [WIP 43] VISION.51 [WIF 52] VISION.51 [WIP 53] B2. Top Opening Cleanroom Luminaires VISION+.52 [CIF/ P 15] VISION.54 [WIF 75] VISION.54 [WIP 75] Light Colour and Colour Rendering.57 Lamp Information.58 Recommended Illumination as per IS 3646 [Part 1]: Branch Addresses

6 customer speak Wipro Lighting has been at the forefront of offering leading edge technologies. I recommend Wipro Lighting Products & solutions as they offer the best value for our clients. B. R. V. MUTRHY Potential Service Consultants (P) Ltd., Bangalore We have used Wipro Lighting Products in our Khyber Pass Depot and other projects of DMRC and are satisfied with their product performance and technical support. We find Wipro Lighting s products aesthetically pleasing and they are value for money. Wipro has an innovative and energy efficient range of products. They have got a range of Lighting Controls system that helps in saving energy besides offering comfort and convenience to occupants of the place. Their after sales support is excellent and they always deliver to our requirements. J. L. Arora Delhi Metro Rail Corporation, Delhi

7 We are happy to inform that we have used Wipro Lighting Solutions and Products for various projects. The lighting solution, technical support and response time for designs by Wipro technical team is encouraging. We are also happy for post sales technical services from Wipro during installations and commissioning of lighting systems in the projects executed. We wish Wipro successful growth in the business of lighting in future. We have used Wipro Lighting Solutions and Products for BCCI offices in Mumbai. The Lighting Solutions, Technical Support and Designs provided by Lighting Solution Group, Mumbai is good and innovative. Their Lighting Solutions have helped us in creating best lighting effects for our prestigious project. The response time in submitting designs is also good. We wish them all the best for the future ahead. D. B. Pradhan Frischmann Prabhu Consultants Pvt. Ltd., Mumbai Amol Prabhu Shashi Prabhu and Associates, Mumbai & Pune

8 Applications guide Offices (Open-plan offices, Software development centers, Call centers, Foyers, Corridors, Office outdoors, etc.) ENTRANCE Areas SWIMMING POOL HOSPITALS & CLINICS (Wards, Operating theaters, general rooms, hospital outdoors) RECEPTION STATUES AUTO SHOWROOM PHARMACEUTICAL PLANT (Cleanroom & Semi cleanroom areas) FACADE LIGHTING GARAGE PUBLIC ACCESS & CIRCULATION AREAS (Entrance halls and lobbies, Staircases) AUDITORIUM CAR PARKS SCHOOL & LECTURE HALL CONVEYOR GALLERY HOTEL & CATERING (Bars, Hotel rooms, Restaurants, Canteens, Outdoors, etc.) HOMES MINES

9 PORTS AND DOCKS CONFERENCES MAJOR ROADS (Highways, Boulevards, Collector roads, Roundabouts, Crossings, Traffic junctions) MANUFACTURING PLANT (Production plants, Workshops, Laboratories, etc.) SPORTS FACILITIES SECONDARY ROADS (Urban & rural roads) RETAIL SHOP RACKS GARDENS (Parks, Farmhouses, Resorts, Bungalows) LOCAL ROADS (Society roads & Shopping streets with mainly local traffic) FOOD AND BEVERAGE INDUSTRY THE ARTS (Art galleries, Museums, Cinemas, Places of worship, etc.) AIRPORTS PETROL PUMP WAREHOUSES RAILWAY STATION BANKS & INSURANCE COMPANIES RESORT SERVICE AREA

10 PRODUCT CODIFICATION The products are assigned Catalogue nos. Based on product type, lamp type, number of lamps and wattage of the lamp used. FIRST LETTER - COMMON FOR ALL PRODUCTS W WIPRO F Fantasy U Urbano G GALAXY C CLEANRoom SECOND LETTER - PRODUCT TYPE C COMMERCIAL V COMMERCIAL I INDUSTRIAL H HIGHBAY/ MIDBAY/ LOWBAY S STREET/ STEPLIGHT F FLOOD LIGHT W WELL GLASS/ WALL LIGHT K BULKHEAD P POST TOP B BALLAST/ BOLLARD A AVIATION R RETAIL U UNDERWATER D DRIVEOVER/ WALKOVER T TRACKLIGHT G CONTROL GEAR THIRD LETTER - TYPE OF LAMP G INCANDESCENT LAMP: GLS F LINEAR FLUORESCENT LAMP: FTL P COMPACT FLUORESCENT LAMP: CFL M HIGH PRESSURE MERCURY VAPOUR LAMP: HPMV S HIGH PRESSURE SODIUM VAPOUR (ELLIPTICAL) LAMP: HPSV-E T HIGH PRESSURE SODIUM VAPOUR (TUBULAR) LAMP: HPSV-T Q TUNGSTEN HALOGEN LAMP N NEON SPIRAL LAMP H METAL HALIDE LAMP: MHL First two numerals: Product code as per design methodology Third numeral: No. of Lamps in the Luminaire Last two numerals: Wattage of Lamps used in the Luminaire EXCEPTIONS In case of HID luminaires (Mercury/ Sodium/ Metal Halide) the last three numbers represent the lamp wattage. Number of lamps is not indicated. In case of Aviation obstruction luminaire, the numerals do not represent the wattage of the lamp. Given below is an example to explain the process of codification. W I F WIPRO INDUSTRIAL FTL PRODUCT NUMBER WATTAGE CODE OF LAMPS OF LAMP NOTE: * All trademarks are properties of the respective owners. ** Innovation and improvement are a way of life at Wipro. We reserve the right to modify the product without prior intimation. 10

11 Ingress protection (ip) classification Degree of protection indicated by the First Characteristic Numeral (DUST PROTECTION) Description Short definition 0 Non-protected No special protection 1 Protected against solid objects greater than 50 mm 2 Protected against solid objects greater than 12 mm 3 Protected against solid objects greater than 2.5 mm 4 Protected against solid objects greater than 1 mm A large surface of the body, such as a hand (but no protection against deliberate access). Solid objects exceeding 50 mm diameter Finger or similar objects not exceeding 80 mm in length. Solid objects exceeding 12 mm in diameter Tools, wires etc of diameter or thickness greater than 2.5 mm. Solid objects exceeding 2.5 mm in diameter Wires or strips of thickness greater than 1.0 mm. Solid objects exceeding 1.0 mm in diameter 5 Dust-protected Ingress of dust is not totally prevented. But dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment 6 Dust-tight No ingress of dust Degree of protection indicated by the Second Characteristic Numeral (MOISTURE PROTECTION) Description Short definition 0 Non-protected No special protection 1 Protected against dripping water 2 Protected against dripping water when tilted up to 15 O 3 Protected against splashing water 4 Protected against splashing water 5 Protected against water jets 6 Protected against heavy seas 7 Protected against the effect of immersion 8 Protected against submersion Dripping water (vertically falling drops) shall have no harmful effect Vertically falling drops shall have no harmful effect when the object is tilted to any angle upto 15 O from its normal position Water falling as a spray at an angle up to 60 O from the vertical shall have no harmful effect Water splashed against the enclosure from any direction shall have no harmful effect Water projected by a nozzle against the enclosure from any direction shall have no harmful effect Water from heavy seas or water projected in heavy jets shall not enter the enclosure in harmful quantities Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time The equipment is suitable for continuous submersion in water under conditions which shall be specified by the manufacturer. Note: Normally this will mean that the equipment is hermetically sealed. However with certain types of equipment it can mean that water can enter but only in such a manner that it produces no harmful effects 11

12

13 Customer benefits excellent LIGHT DISTRIBUTION PATTERN High efficiency luminaires ENHANCED EFFICIENCY 01 ROBUST IN DESIGN Aesthetic Design, integrates well with THE interiors AESTHETIC 02 VALUE FOR MONEY Energy efficiency with various lamps and control gear options Extensive range of luminaires for varied applications HIGH COMPONENT LIFE 03 SIMPLE MODULARITY Even & wide distribution of soft, comfortable light Easy to install, saves installation time EASY TO MAINTAIN 04 13

14 TECHNIK [ WHH/ s/ M 66 ] ENCLOSED VERSION TECHNIK [ WHS/ M 28 ] OPEN VERSION integral vertical mounted midbay luminaires Whh/s/m 66 - Lamp compartment: ip 65 - gear compartment: ip 54 Whs/ m 28 - Lamp compartment: ip 20 - gear compartment: ip 54 SPECIFICATIONS Ribbed anodized extruded aluminium housing in satin finish for better heat dissipation Pressure die cast aluminium top cover fitted with mounting U hook Pressure die cast skirt with air vents for heat dissipation and self cleaning of reflectors High purity electrochemically brightened anodised spun aluminium reflector Available with compact, matt finish, wide beam reflector Swing openable cover for ease of maintenance Housing is fitted with heavy duty copper wound ballast, PF capacitor and accessories pre-wired upto terminal block IP 54 control gear compartment WHH/ S/ M 66 - totally enclosed version with EPDM gasket and extruded aluminium toggles WHS/ M 28 - open version Internal wiring of Class H insulation in XLPE WHh/ s/ m 66 (enclosed version) WHs/ m 28 (open version) INSTALLATION Factory fitted rugged U-hook for suspension suitable for M 12 bolt 4 way 10 Amps. GFP mains connector for 2.5 sq mm incoming cable with loop in-loop out facility via two pierce plugs Reflectors with key slots for ease of assembly WHH/ S/ M 66 -Suitable for 250 W MHL(E), HPSV (E) & HPMV (E) lamps WHS/ M 28 -Suitable for 250 W HPSV (E) and HPMV (E) lamps DIMENSION DRAWING Whh/ s/ m 66 DIMENSION DRAWING whs/ m ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WHH x 250 W MHL (E) 230/ WHS x 250 W HPSV (E) 230/ WHM x 250 W HPMV (E) 230/ WHS x 250 W HPSV (E) 230/ WHM x 250 W HPMV (E) 230/

15 WHh/ s/ m 66 15

16 TECHNIK [ WHH/ s/ M 64 ] ENCLOSED VERSION TECHNIK [ WHS/ M 24 ] OPEN VERSION Integral, vertical mounted highbays with narrow beam reflector Whh/s/m 64 - Lamp compartment: ip 65 - gear compartment: ip 54 WhS/ m 24 - Lamp compartment: ip 20 - gear compartment: ip 54 SPECIFICATIONS Ribbed anodized extruded aluminium housing in satin finish for better heat dissipation Pressure die cast aluminium top cover fitted with mounting U hook Pressure die cast skirt with air vents for heat dissipation and self cleaning of reflectors High purity electrochemically brightened anodised spun aluminium reflector Available with radical faceted, narrow beam reflector Swing openable cover for ease of maintenance Housing is fitted with heavy duty copper wound ballast, PF capacitor and accessories pre-wired upto terminal block IP 54 control gear compartment WHH/ S/ M 64 - totally enclosed version with EPDM gasket and extruded aluminium toggles WHS/ M 24 - open version Internal wiring of Class H insulation in XLPE WHh/ s/ m 64 (ENCLOSED VERSION) WHs/ m 24 (OPEN VERSION) INSTALLATION Factory fitted rugged U-hook for suspension suitable for M 12 bolt 4 way 10 Amps. GFP mains connector for 2.5 sq mm incoming cable with loop in-loop out facility via two pierce plugs Reflectors with key slots for ease of assembly WHH/ S/ M 64 - Suitable for 250 W & 400 W MHL (E), HPSV (E) & HPMV (E) lamps WHS/ M 24 - Suitable for 250 W & 400 W, HPSV (E) & HPMV (E) lamps DIMENSION DRAWING Whh/ s/ m 64 DIMENSION DRAWING whs/ m ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WHH x 250 W MHL (E) 230/ WHS x 250 W HPSV (E) 230/ WHM x 250 W HPMV (E) 230/ WHH x 400 W MHL (E) 230/ WHS x 400 W HPSV (E) 230/ WHM x 400 W HPMV (E) 230/ WHS x 250 W HPSV (E) 230/ WHM x 250 W HPMV (E) 230/ WHS x 400 W HPSV (E) 230/ WHM x 400 W HPMV (E) 230/

17 TECHNIK [ WHH/ s/ M 65 ] enclosed version TECHNIK [ WHS/ M 25 ] open version integral, vertical mounted highbays with wide beam reflector Whh/s/m 65 - Lamp compartment: ip 65 - gear compartment: ip 54 WhS/ m 25 - Lamp compartment: ip 20 - gear compartment: ip 54 SPECIFICATIONS Ribbed anodized extruded aluminium housing in satin finish for better heat dissipation Pressure die cast aluminium top cover fitted with mounting U hook Pressure die cast skirt with air vents for heat dissipation and self cleaning of reflectors High purity electrochemically brightened anodised spun aluminium reflector Available with matt finish wide beam reflector Swing openable cover for ease of maintenance Housing is fitted with heavy duty copper wound ballast, PF capacitor and accessories pre-wired upto terminal block IP 54 control gear compartment WHH/ S/ M 65 - totally enclosed version with EPDM gasket and extruded aluminium toggles WHS/ M 25 - open version Internal wiring of Class H insulation in XLPE WHh/ s/ m 65 (enclosed version) WHs/ m 25 (open version) INSTALLATION Factory fitted rugged U-hook for suspension suitable for M 12 bolt 4 way 10 Amps. GFP mains connector for 2.5 sq mm incoming cable with loop in-loop out facility via two pierce plugs Reflectors with key slots for ease of assembly WHH /S /M 65 - Suitable for 250 W & 400 W MHL (E), HPSV (E) & HPMV (E) lamps WHS /M 25 - Suitable for 250 W & 400 W HPSV (E) & HPMV (E) lamps DIMENSION DRAWING Whh/ s/ m 65 DIMENSION DRAWING whs/ m 25 ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WHH x 250 W MHL (E) 230/ WHS x 250 W HPSV (E) 230/ WHM x 250 W HPMV (E) 230/ WHH x 400 W MHL (E) 230/ WHS x 400 W HPSV (E) 230/ WHM x 400 W HPMV (E) 230/ WHS x 250 W HPSV (E) 230/ WHM x 250 W HPMV (E) 230/ WHS x 400 W HPSV (E) 230/ WHM x 400 W HPMV (E) 230/

18 indibay [ WHF 30/ WHP 30 ] Integral mid bay and high bay luminaires with specially designed reflectors IP 20 SPECIFICATIONS Powder coated CRCA housing with intergal control gear & reflector Specially designed pre anodized super high purity aluminium reflector Multiple distribution options : Wide- Medium-Narrow through lamp holder position adjustment Aesthetic end caps made of engineering plastic Lamp holders with special locking mechanism Tool less maintenance with special loss-proof captive screws Conical grip wire entry grommet All accessories pre-wired up to terminal block Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Accessories Polycarbonate T5 FTL Lamp holder, G5, with phosphor bronze contacts Polybutylene terpthalate CFL Lamp holder, 2G11, with phosphor bronze contacts 5 way 10 Amps GFP mains connector for 2.5 sq. mm incoming cable with in-built loop-in loop-out INSTALLATION Provision for pendant mounting on conduits, 19 mm Dia., 2 Nos. Provision for surface mounting using 4 nos. screws through embossed holes Use suitable brackets to mount luminaire under truss Note: Do not mount luminaire using chains, wires, hooks etc CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Dimmable control gear WHF 30 WHP 30 WHF 30 - Suitable for 4 x 28 W, 6 x 28 W, 4 x 54 W and 6 x 54 W FTL (T5) lamps WHP 30 - Suitable for 4 x 36 W, 4 x 40 and 4 x 55 W CFL (TC-L) lamps DIMENSION DRAWING WhF 30/ WHP 30 C 340 B C a Suspension Mounting 60 Surface Mounting Cat. No. A B C WHF 30428/ WHF WHF 30628/ WHF WHP WHP 30440/ WHF ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WHF SGW 6 x 28 W FTL (T5) 230/ WHF APF 6 x 28 W FTL (T5) 230/ WHF APF 6 x 54 W FTL (T5) 230/ WHF SGW 4 x 28 W FTL (T5) 230/ WHF APF 4 x 28 W FTL (T5) 230/ WHF APF 4 x 54 W FTL (T5) 230/ WHP SGW 4 x 36 W CFL (TC-L) 230/ WHP APF 4 x 36 W CFL (TC-L) 230/ WHP APF 4 x 40 W CFL (TC-L) 230/ WHP APF 4 x 55 W CFL (TC-L) 230/

19

20 SAVIOUR PLUS [ WIF 21/ WIF 22 ] SLIM ENERGY SAVING CHANNEL SUITABLE FOR FTL (T5) LAMPS IP 20 SPECIFICATIONS Robust design made of high quality CRCA steel sheet, powder coated housing & cover WIF 21- CRCA steel sheet epoxy polyester powder coated housing with cover WIF 22- Pre-anodised high purity aluminium reflector for narrow light distribution Snap fit polycarbonate lamp holders Suitable ballast is pre-wired using 3-way 5 amp GFP Mains connector Conforms to IS 10322/ Part 5/ Sec. 1: 1987 INSTALLATION Individual two point surface mounting on ceiling/wall Ceiling suspension using 19 mm OD conduit pipe using knock outs provided on channel Suitable for 19 mm ET cable entry wif 21 wif 22 CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 14 W, 2 x 14 W, 1 x 28 W, 2 x 28 W, 1 x 54 W and 2 x 54 W FTL (T5) lamps DIMENSION DRAWING WIF /128 /154 WIF /128 /154 WIF /228 /254 WIF /228 /254 Cat. No. A B C WIF 21114/ C/C 450 C/C WIF 21128/ C/C 650 C/C WIF 21154/ C/C 650 C/C WIF 21214/ C/C 450 C/C WIF 21228/ C/C 650 C/C WIF 21254/ C/C 650 C/C ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF APF 1 x 14 W FTL (T5) 230/ WIF APF 2 x 14 W FTL (T5) 230/ WIF SGW 1 x 28 W FTL (T5) 230/ WIF APF 1 x 28 W FTL (T5) 230/ WIF SGW 2 x 28 W FTL (T5) 230/ WIF APF 2 x 28 W FTL (T5) 230/ WIF APF 1 x 54 W FTL (T5) 230/ WIF APF 2 x 54 W FTL (T5) 230/ WIF APF 1 x 14 W FTL (T5) 230/ WIF APF 2 x 14 W FTL (T5) 230/ WIF SGW 1 x 28 W FTL (T5) 230/ WIF APF 1 x 28 W FTL (T5) 230/ WIF SGW 2 x 28 W FTL (T5) 230/ WIF APF 2 x 28 W FTL (T5) 230/ WIF APF 1 x 54 W FTL (T5) 230/ WIF APF 2 x 54 W FTL (T5) 230/ Suitable reflectors are packed separately in suitable case lots 20

21 SAVIOUR PLUS [ WIF 23 ] SLIM ENERGY SAVING CHANNEL SUITABLE FOR FTL (T5) LAMPS IP 20 SPECIFICATIONS Robust design made of high quality CRCA steel sheet, powder coated housing & cover CRCA steel sheet epoxy polyester powder coated reflector for wider light distribution Snap fit polycarbonate lamp holders Suitable Ballast is pre-wired using 3-way 5 amp GFP Mains connector Conforms to IS 10322/ Part 5/ Sec. 1: 1987 wif 23 INSTALLATION Individual two point surface mounting on ceiling/wall Ceiling suspension using 19 mm OD conduit pipe using knock outs provided on channel Suitable for 19 mm ET cable entry CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 14 W, 2 x 14 W, 1 x 28 W, 2 x 28 W, 1 x 54 W and 2 x 54 W FTL (T5) lamps DIMENSION DRAWING WIF /128 / WIF /228 /254 Cat. No. A B C WIF 23114/ C/C 450 C/C WIF 23128/ C/C 650 C/C WIF 23154/ C/C 650 C/C ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF APF 1 x 14 W FTL (T5) 230/ WIF APF 2 x 14 W FTL (T5) 230/ WIF SGW 1 x 28 W FTL (T5) 230/ WIF APF 1 x 28 W FTL (T5) 230/ WIF SGW 2 x 28 W FTL (T5) 230/ WIF APF 2 x 28 W FTL (T5) 230/ WIF APF 1 x 54 W FTL (T5) 230/ WIF APF 2 x 54 W FTL (T5) 230/ Suitable reflectors are packed separately in suitable case lots 21

22 VERSA [ WIF 32 ] 22

23 VERSA [ WIF 32 ] INDUSTRIAL FLUORESCENT CHANNEL RANGE WITH WIDE BEAM REFLECTORS IP 20 SPECIFICATIONS Sleek and rugged design made of CRCA sheet steel powder coated housing and cover Precisely formed pre anodised super high purity aluminium reflectors WIF 32 Series comes with wide beam reflectors Aesthetic engineering plastic end caps with polycarbonate lamp holders Slim, compact, open type low loss electromagnetic copper wound ballast Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Accessories Snap fit rotor; lamp holder and starter seat Pinch type starter with RF suppression capacitor (applicable only for electromagnetic ballast) 5 Amps. GFP mains connector for 1 sq mm incoming cable PF correction capacitor (applicable only for electromagnetic ballast) INSTALLATION Suspension mounting : Provision for mounting with help of 2 Nos, 19 mm dia. conduits Surface mounting : Provision for surface mounting CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 36 W and 2 x 36 W FTL (T8) lamps DIMENSION DRAWING WIF for surface mounting 600 for conduit suspension Cat. No. Length (L) Width (W) WIF WIF mm. conduit 110 L W ELECTRICAL DATA Cat.no lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x36 W FTL (T8) 230/ WIF SGW 1x36 W FTL (T8) 230/ WIF x36 W FTL (T8) 230/ WIF SGW 2x36 W FTL (T8) 230/ Suitable reflectors are packed separately in suitable case lots 23

24 VERSA [ WIF 33 ] INDUSTRIAL FLUORESCENT CHANNEL RANGE WITH NARROW BEAM REFLECTOR IP 20 SPECIFICATIONS Sleek and rugged design made of CRCA sheet steel powder coated housing and cover Precisely formed pre anodised super high purity aluminium reflectors WIF 33 Series comes with narrow beam reflectors Aesthetic engineering plastic end caps with polycarbonate lamp holders Slim, compact, open type low loss electromagnetic copper wound ballast Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Accessories Snap fit rotor; lamp holder and starter seat Pinch type starter with RF suppression capacitor (applicable only for electromagnetic ballast) 5 Amps. GFP mains connector for 1 sq mm incoming cable PF correction capacitor (applicable only for electromagnetic ballast) INSTALLATION Suspension mounting : Provision for mounting with help of 2 Nos, 19 mm dia. conduits Surface mounting : Provision for surface mounting CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 36 W and 2 x 36 W FTL (T8) lamps DIMENSION DRAWING WIF for surface mounting 600 for conduit suspension 19 mm. conduit Cat. No. Length (L) Width (W) WIF WIF L W ELECTRICAL DATA Cat.no lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x36 W FTL (T8) 230/ WIF SGW 1x36 W FTL (T8) 230/ WIF x36 W FTL (T8) 230/ WIF SGW 2x36 W FTL (T8) 230/ Suitable reflectors are packed separately in suitable case lot 24

25 VERSA [ WIF 33 ] 25

26

27 OPTIMA [ WIF 14140/ WIF ] INDUSTRIAL CHANNEL WITH PRE-COATED SHEET STEEL, SUITABLE FOR ftl (T8) LAMPS IP 20 SPECIFICATIONS Slender and robust design in high quality polyester pre-coated galvanized steel Soft contoured injection moulded plastic end caps in white ABS plastic material and snap fit lamp holders Slim, compact, open type low loss electromagnetic copper wound ballast 2 way, 5 Amps, glass filled polyester connector Pinch type starters which eliminate flickering at low voltages and capacitor with metallized polypropylene film (applicable only for electromagnetic ballast) Conforms to IS 10322/ Part 5/ Sec 1:1987 INSTALLATION Individual two-point surface mounting on walls and ceiling Ensures correct mounting even on uneven surfaces Ceiling suspension using 19 mm diameter rigid conduit on two knockouts which provide suitable piercing Offers flexible mounting options based on customer s infrastructure Ceiling suspension on chain by means of special spring steel clips (clips provided only on request) wif wif Optional Features External earthing terminal CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 36/ 40 W and 2 x 36/ 40 W FTL (T8) lamps DIMENSION DRAWING wif DIMENSION DRAWING wif C/C For Conduit Suspension C/C For Conduit Suspension C/C For Surface/chain Suspension C/C For Surface/chain Suspension ELECTRICAL DATA Cat.no lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x 36/ 40 W FTL (T8) 230/ WIF SGW 1 x 36/ 40 W FTL (T8) 230/ WIF x 36/ 40 W FTL (T8) 230/ WIF SGW 2 x 36/ 40 W FTL (T8) 230/

28 OPTIMA [ WIF 36140/ WIF ] INDUSTRIAL CHANNEL WITH bi-directional reflector SUITABLE FOR FTL (T8) LAMPS IP 20 SPECIFICATIONS Slender and robust design in high quality polyester pre-coated galvanized steel Bi-directional (full) reflector made of polyester pre-coated galvanized steel, profiled to provide robust construction and adequate illumination Soft contoured injection moulded plastic end caps in white ABS plastic material and snap fit lamp holders Slim, compact, open type low loss electromagnetic copper wound ballast 2 way, 5 amps, glass filled polyester connector Pinch type starters which eliminate flickering at low voltages and capacitor with metallized polypropylene film (applicable only for electromagnetic ballast) Conforms to IS 10322/ Part 5/ Sec. 1: 1987 INSTALLATION Individual two-point surface mounting on walls and ceiling Ensures correct mounting even on uneven surfaces Ceiling suspension using 19 mm diameter rigid conduit on two knockouts which provide suitable piercing Offers flexible mounting options based on customer s infrastructure Ceiling suspension on chain by means of special spring steel clips (clips provided only on request) WIF WIF Optional Features External earthing terminal CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 36/ 40 W and 2 x 36/ 40 W FTL (T8) lamps DIMENSION DRAWING WIF DIMENSION DRAWING WIF C/C For Conduit Suspension C/C For Conduit Suspension C/C For Surface/chain Suspension Bi-directional 654 C/C For Surface/chain Suspension Bi-directional ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x 36/ 40 W FTL (T8) 230/ WIF SGW 1 x 36/ 40 W FTL (T8) 230/ WIF x 36/ 40 W FTL (T8) 230/ WIF SGW 2 x 36/ 40 W FTL (T8) 230/ Suitable reflectors are packed separately in suitable case lot 28

29 WCF 12136/ WCF INDUSTRIAL FLOURESCENT CHANNEL SUITABLE FOR FTL (T8) LAMPS IP 20 SPECIFICATIONS CRCA housing fitted with slim open type copper low loss ballast, PF capacitor and cover Knurled screws for fixing cover with the channel All accessories pre-wired upto terminal block Conforms to IS 10322/ Part 5/ Sec 1: 1987 Accessories Snap fit rotor holder and starter barrel Pinch type starter with RF suppression capacitor Suitable for 19 mm ET cable entry through knock outs from top 2 Way 5 Amps. GFP mains connector for 1 sq mm incoming cable Earthing terminal for 14 SWG earthing wire P. F. correction capacitor (applicable only for electromagnetic ballast) INSTALLATION Provision for mounting with the help of 2 Nos. 19 mm dia conduits WCF WCF CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 36 W and 2 x 36 W FTL (T8) lamps DIMENSION DRAWING wcf DIMENSION DRAWING wcf C/C 19 mm. Knock-out For Installation C/C 19 mm. Knock-out For Installation mm. Knock-out For Cable Entry 19 mm. Knock-out For Cable Entry ELECTRICAL DATA Cat.no lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WCF x 36 W FTL (T8) 230/ WCF SGW 1 x 36 W FTL (T8) 230/ WCF x 36 W FTL (T8) 230/ WCF SGW 2 x 36 W FTL (T8) 230/

30 WCF 26136/ WCF INDUSTRIAL FLOURESCENT CHANNEL with store enamelled reflector IP 20 SPECIFICATIONS CRCA housing fitted with slim open type copper low loss ballast, PF capacitor and cover Stove enamelled CRCA reflector (WIR 26) Knurled screws for fixing cover with the channel All accessories pre-wired upto terminal block Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Accessories Snap fit rotor holder and starter barrel Pinch type starter with RF suppression capacitor Suitable for 19 mm ET cable entry through knock outs from top 2 Way 5 Amps. GFP mains connector for 1 sq mm incoming cable Earthing terminal for 14 SWG earthing wire P. F. correction capacitor (applicable only for electromagnetic ballast) WCF WCF INSTALLATION Provision for mounting with the help of 2 Nos. 19 mm dia conduits OPTIONAL FEATURES Vitreous enamelled CRCA reflector (WIR 41) for better efficiency, protection from moderate humidity & corrosive vapour - WCF 41 CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 36 W and 2 x 36 W FTL (T8) lamps DIMENSION DRAWING WCF DIMENSION DRAWING WCF C/C 19 mm. Knock-out For Installation C/C 19 mm. Knock-out For Installation ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WCF x 36 W FTL (T8) 230/ WCF SGW 1 x 36 W FTL (T8) 230/ WCF x 36 W FTL (T8) 230/ WCF SGW 2 x 36 W FTL (T8) 230/ Suitable reflectors are packed separately in suitable case lot 30

31 CAPSULE [ WIF 83 ] Surface/ pendant mounted IP 65 LUMINAIRE SUITABLE For FTL (T8) LAMPS IP 65 SPECIFICATIONS Light grey dust proof polycarbonate body with frosted ends and polyurethane double gasket UV stabilized polycarbonate diffuser with transparent prismatic interior and smooth exterior SS brackets for fixing on ceiling and SS toggles for diffuser fixing Additional SS clips for pendant mounting Polyamide cable gland suitable for 9/11 mm cables Open type slim copper ballasts and accessories mounted on removable gear tray Conforms to IS 10322/ Part 5/ Sec. 1: 1987 WIF 83 Accessories Sleek snap fit rotor lamp holders and starter seat Pinch type starter with R. F. suppression capacitor (applicable only for electromagnetic ballast) 4 Way, 5 Amps GFP mains connector for 1 sq mm incoming cable All accessories are pre-wired upto terminal block INSTALLATION SS fixing bracket and suspension hooks are provided for easy and quick installation CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) Suitable for 1 x 36 W and 2 x 36 W FTL (T8) lamps DIMENSION DRAWING WIF DIMENSION DRAWING WIF ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x 36 W FTL (T8) 230/ WIF SGW 1 x 36 W FTL (T8) 230/ WIF APF 1 x 36 W FTL (T8) 230/ WIF x 36 W FTL (T8) 230/ WIF SGW 2 x 36 W FTL (T8) 230/ WIF APF 2 x 36 W FTL (T8) 230/

32 whh 91/ WHH 92 32

33 WHH 91/ WHH 92 integral totally enclosed lowbay luminaires IP 65 SPECIFICATIONS Die formed aluminium housing with integral control gear and reflector Die cast aluminium frame permanently fixed to housing for high ingress protection Specially designed reflector with options of symmetric (WHH 91 series) and asymmetric (WHH 92 series) light distribution Toughened glass opens on hinges and is locked using captive die cast locks resulting in ease of maintenance Anti corrosive stainless steel external hardware and captive screws Heavy duty Copper wound ballast and all accessories pre-wired upto terminal block Conforms to IS 10322/ Part 5/ Sec. 1 : 1987 Whh 91/ Whh 92 Accessories Lamp holder base RX 7s 24, porcelain, 2 Nos. with silver contacts 4 way 10 Amps GFP. Mains connector for 2.5 sq. mm incoming cable with loop in loop out PF correction capacitor Internal earthing terminal for 14 SWG earthing wire INSTALLATION Recess mounted in Luxalon/ Supersil false ceiling with 4 Nos of chain/ cable suspension Optional Features External earthing terminal Super imposed pulse type Ignitor Suitable for 70 W and 150 W HIT-DE lamps DIMENSION DRAWING Whh 91/ WHH SQ 211 ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WHH x 70 W HIT-DE 230/ WHH x 150 W HIT-DE 230/ WHH x 70 W HIT-DE 230/ WHH x 150 W HIT-DE 230/

34 whh 96 S/ WHH 98 S/ WHH 99 S 34

35 WHH 96 S/ WHH 98 S/ WHH 99 S INTEGRAL, TOTALLY ENCLOSED LOWBAY LUMINAIRE IP 65 SPECIFICATIONS Die cast aluminium housing in oxy-metallised finish with integral control gear and reflector Die cast aluminium hingeable frame fitted with toughened glass for high ingress protection Specially designed super high purity aluminium reflector with bright hammered finish Heat and ageing resistant silicon rubber gasket Anti-corrosive stainless steel external hardware and captive screws Control gear accessories are mounted on a removable gear tray WHH S/ S/ S have a bi-directional reflector and WHH S has a uni-directional reflector Heavy duty Copper wound ballast and all accessories pre-wired upto terminal block Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Whh 96 S Accessories Lamp holder base RX 7s 24, porcelain, 2 Nos. with silver contacts for WHH 96 S and ES 40 porcelain for WHH 98 S/ 99 S 4 way 10 Amps GFP. Mains connector for 2.5 sq. mm incoming cable with loop in loop out PF correction capacitor Internal earthing terminal for 14 SWG earthing wire XLPE wiring with Class H insulation INSTALLATION Recessed in Luxalon and special Supersil false ceiling with 4 nos. of chain/ cable suspension OPTIONAL FEATURES External earthing terminal Super imposed pulse type ignitor Suitable for 70 W, 150 W HIT-DE and 250 W MHL (T) lamps DIMENSION DRAWING WHH 96 S/ WHH 98 S/ WHH 99 S D E C Cat No. A B C D E WHH S/96150 S WHH S/ S A B ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WHH S 1 x 70 W HIT-DE 230/ WHH S 1 x 150 W HIT-DE 230/ WHH S 1 x 250 W MHL (T) 230/ WHH S 1 x 250 W MHL (T) 230/

36 WHM 84/ whs 84/ whh 84 INDUSTRIAL INTEGRAL LOWBAY luminaires IP 43 SPECIFICATIONS CRCA stove enamelled black housing Toughened glass and felt gasket provided on lamp compartment and control gear Specially designed highly specular finish reflector for HPMV and HPSV lamps Hammered finish reflector for MHL lamps Toughened glass & felt gasket provided on lamp compartment and control gear Cable entry : 2 nos. suitable for 19 mm ET cable plugged with EPDM rubber plugs Heavy duty copper wound ballast and all accessories pre-wired upto terminal block Conforms to IS 10322/ Part 5/ Sec 1 : 1987 WHM/ S/ H 84 Accessories Lamp holder: For HPMV - 3 pin BC porcelain as standard (ES 27 available on request) For HPSV ES 27, porcelain For MHL - Rx7s porcelain pair with silver contact 4 way 10 Amps G. F. P. mains connector for 2.5 sq mm incoming cable for loop in loop-out wiring 2 way 10 Amps G. F. P. lamp connector, PF improvement capacitor Three wire electronic Ignitor (for HPSV and MHL lamps) Internal earthing terminal for 14 SWG earthing wire. 2 nos. of external earthing provided All accessories except ballast are fitted on tray INSTALLATION Suitable for mounting with 2 nos. adjustable mounting bracket on truss/ ceiling and 2 nos. of M 12 or 1/2 (max. size) bolts Optional Features Super imposed pulse type Ignitor for MHL lamps (WHH T) Packing Case lot Luminaire: 2 nos, Ballast: 4 nos Suitable for 80 W, 125 W HPMV; 70 W HPSV and 70 W HIT-DE lamps DIMENSION DRAWING WHm 84/ whs 84 DIMENSION DRAWING Whh ø 13 hole 2 no ø 13 hole 2 no. 297 c/c 10 WHM 84/ WHS 84 (for HPMV/ HPSV lamp only) WHH 84 (for Metal Halide lamp only) ELECTRICAL DATA Cat. No. Lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WHM * 1 x 80 W HPMV (BC lamp holder) 230/ WHM * 1 x 125 W HPMV (BC lamp holder) 230/ WHS x 70 W HPSV (E) (with Internal starter) 230/ WHS x 70 W HPSV (E) (without Internal starter) 230/ WHH x 70 W HIT-DE 230/ WHH x 150 W HIT-DE 230/ * In case required with ES cap, suffix ES to Cat. no. 36

37

38 Wwp 55 38

39 WWP 55/ WWp 56/ WWP 57 NEW ENERGY EFFICIENT IP 65 INTEGRAL WELLGLASS LUMINAIRE SUITABLE FOR CFL LAMPs IP 65 SPECIFICATIONS Pressure die cast aluminium body finished in corrosion resistant oxymetallizing surface treatment fitted with heat resistant glass dome Heat resistant EPDM gasket User-friendly hingeable glass dome assembly along with chain arrangement IP 65 - Dust tight and water proof Available with option of stove enamelled reflector (WWP 56) or vitreous enamelled reflector (WWP 57) Suitable for 19 mm ET cable entry Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Accessories Lamp holder: polycarbonate, G24-d3 4 way 5 Amp glass filled polyester connectors for 1.0 sq mm incoming wires for loop-in loop-out wiring Earthing terminal for 14 SWG earthing wire installation Two point mounting at centre distance 130 mm using two nos. of M8 bolts (to be ordered separately) Suitable for 1 x 18 W 2 x 18 W, 1 x 26 W, 2 x 26 W CFL (TC-D) and 2 x 18 W CFL (TC-DE) lamps DIMENSION DRAWING Wwp 55 DIMENSION DRAWING Wwp 56/ WWP 57 Cable entry 130 c/c Tapped hole 5/16 2 nos. 5/8 deep Cable entry 130 c/c Tapped hole 5/16 2 nos. 5/8 deep ø 190 ø 320 ELECTRICAL DATA Cat.no lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WWP x 26 W CFL (TC-D) 230/ WWP x 26 W CFL (TC-D) 230/ WWP x 18 W CFL (TC-D) 230/ WWP x 18 W CFL (TC-D) 230/ WWP SGW 2 x 18 W CFL (TC-DE) 230/ WWP 56: For stove enamelled reflector; WWP 57: For vitreous enamelled reflector 39

40 WWM 52/ WWM 53/ WWM 54 IP 65 INTEGRAL WELLGLASS LUMINAIRE IP 65 SPECIFICATIONS Die cast aluminium stove enamelled black housing fitted with heat resistant glass dome, EPDM rubber gasket and wire guard Hingeable glass assembly with chain arrangement WWM 54 is without any reflector WWM 52 is with stove-enamelled reflector (WWR 52); WWM 53 is with vitreous enamelled reflector (WWR 53) Heavy duty copper wound ballast and all accessories pre-wired upto terminal block Conforms to IS 10322/ Part 5/ Sec. 1: 1987 WwM 54 Accessories Lamp holder: 3 pin BC porcelain as standard (ES 27 available on request) 4 way 10 Amps G.F.P. mains connector for 2.5 sq. mm incoming cable for loop in - loop out wiring Power factor improvement capacitor Earthing terminal for 14 SWG earthing wire Suitable for 19 mm ET cable entry Stainless steel external hardware INSTALLATION Suitable for 18 mm I.D. eyebolt suspension (to be ordered separately) Optional Features Epoxy painting External earthing terminal PACKING CASE LOT Housing: 2 nos; Reflector (WWR 52/ 53): 16 nos; Ballast: 8 nos Suitable for 80 W and 125 W HPMV lamps DIMENSION DRAWING Wwm 54 DIMENSION DRAWING Wwm 52/ WWM 53 cable Entry c/c tapped hole 5/16 2 nos. 5/8 Deep cable Entry c/c tapped hole 5/16 2 nos. 5/8 Deep chain chain ELECTRICAL DATA Cat. No. Lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WWM 54080* 1 x 80 W HPMV (BC lampholder) 230/ WWM 54125* 1 x 125 W HPMV (BC lampholder) 230/ * In case required with ES cap, suffix ES to Cat. No. WWM 52 - For Stove-enamelled reflector; WWM 53 - For Vitreous enamelled reflector 40

41 WWS 55/ WWS 56/ WWS 57 IP 65 INTEGRAL WELLGLASS LUMINAIRE IP 65 SPECIFICATIONS Pressure die cast aluminium body finished in corrosion resistant oxymetallizing surface treatment fitted with heat resistant glass dome, EPDM gasket WWS 56070/ 71 available with stove-enamelled reflector (WWR 52) WWS 57070/ 71 available with vitreous enamelled reflector (WWR 53) Hingeable glass assembly with chain arrangement Heavy duty copper wound ballast and all accessories pre-wired upto terminal block Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Wws 55 Accessories Lamp holder ES (E27) porcelain 4 way 5 Amps G. F. P. mains connectors for 1 sq. mm incoming wires for loop in - loop out wiring PF improvement capacitor Three wire electronic Ignitor (WWS 55071/ WWS 56071/ WWS 57071) Earthing terminal for 14 SWG earthing wire Suitable for 19 mm ET cable entry INSTALLATION Two point mounting at the centre distance 130 mm using 2 nos of M8 bolts (to be ordered separately) Suitable for 70 W HPSV (E) lamps DIMENSION DRAWING Wws 55 DIMENSION DRAWING Wws 56/ wws 57 cable Entry 130 c/c tapped hole 5/16 2 nos. 5/8 Deep cable Entry 130 c/c tapped hole 5/16 2 nos. 5/8 Deep ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WWS x 70 HPSV (E) 230/ with internal starter WWS x 70 HPSV (E) 230/ without internal starter WWS 56 - For Stove-enamelled reflector; WWS 57- For Vitreous enamelled reflector 41

42 WWG/ M/ s 10/ 11/ 12 IP 65 NON-INTEGRAL WELLGLASS LUMINAIREs IP 65 SPECIFICATIONS Die cast aluminium stove enamelled black housing fitted with heat resistant glass dome, gasket and wire guard Hingeable glass assembly with chain arrangement Lamp holder is pre-wired upto terminal block WWG/ M/ S 10 is without reflector WWG/M/ S 11 available with Stove enamelled reflector for better efficiency, painted black from outside and white from inside (WWR 11) WWG/ M/ S 12 available with Vitreous enamelled reflector for better efficiency and protection from moderate humidity and corrosive vapours, painted black outside and white inside (WWR 12) Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Wwg/ M/ S 10 Accessories Lamp holder: For HPMV - 3 pin BC porcelain as standard (ES 27 available on request) For HPSV ES 27, porcelain 2 way 10 Amps G. F. P. Mains connector for 2.5 sq. mm incoming cable Earthing terminal for 14 SWG earthing wire Stainless steel external hardware INSTALLATION Suitable for 18 mm I. D. eyebolt suspension (to be ordered separately) Optional Features Epoxy painting External earthing terminal PACKING CASE LOT Housing: 2 nos; C.G. Box: 4 nos, Reflector (WWR 11/ 12): 16 nos; Ballast: 8 nos Note: Please order suitable control gear box separately. DIMENSION DRAWING wwg/ M/ S cable Entry Suitable for 1 x 100 W GLS, 1 x 80 W, 1 x 125 W HPMV (BC) and 1 x 70 W HPSV (E) lamps DIMENSION DRAWING wwg/ M/ S 11/ cable Entry ELECTRICAL DATA Cat. No. Lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) Control Gear WWG x 100 W GLS 230/ Not reqd. WWM 10080* 1 x 80 W HPMV (BC) 230/ WGM 16/ WWM 10125* 1 x 125 W HPMV (BC) 230/ WGM 16/ WWS x 70 W HPSV(E) 230/ WGS 16/ with Internal Starer * In case required with ES cap, suffix ES to Cat. No. WWG/ M/ S 11 - For Stove-enamelled reflector; WWG/ M /S 12 - For Vitreous enamelled reflector 42

43 WWM/ S 30/ 31/ 32 IP 65 NON-INTEGRAL WELLGLASS LUMINAIREs IP 65 SPECIFICATIONS Die cast aluminium stove enamelled black housing fitted with heat resistant glass dome, gasket and wire guard Hingeable glass assembly with chain arrangement Lamp holder is pre-wired upto terminal block WWM/ S 30 is without reflector WWM/ S 31 available with Stove enamelled reflector (WWR 31) WWM/ S 32 available with Vitreous enamelled reflector (WWR 32) Conforms to IS 10322/ Part 5/ Sec. 1: 1987 WwM/ S 30/ 31/ 32 Accessories Lamp holder ES (E40), Porcelain 2 way 10 amps G. F. P. mains connector for 2.5 sq. mm incoming cable Earthing terminal for 14 SWG earthing wire Stainless steel external hardware INSTALLATION Suitable for 18 mm I. D. eyebolt suspension (to be ordered separately) Optional Features Epoxy painting External earthing terminal PACKING CASE LOT Housing: 2 nos; C.G. Box 4 nos, Reflector (WWR 31/ 32): 16 nos; Ballast: 4 nos Suitable for 250 W HPMV and 150 W HPSV (E) lamps DIMENSION DRAWING wwm/ S 30 DIMENSION DRAWING wwm/ S 31/ 32 cable Entry cable Entry ELECTRICAL DATA Cat. No. Lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) Control Gear WWM x 250 W HPMV 230/ WGM 16/56250 WWS x 150 W HPSV (E) 230/ WGS 16/ WWM/S 31 - For Stove-enamelled reflector; WWM/ S 32- For Vitreous enamelled reflector 43

44

45

46 WKP 14 CFL BULKHEAD LUMINAIRE IP 54 SPECIFICATIONS Injection moulded engineering plastic U. V. Stabilized ABS Housing Injection moulded engineer plastic U. V. Stabilized Polycarbonate diffuser Heat & ageing resistance gasket CRCA stove enameled painted white Control gear tray duly wired up to terminal block Slim open type low watt loss copper wound ballast, lamp holder pre wired upto terminal block Conforms to IS 10322/ Part 5/ Sec. 1: 1987 Wkp 14 Accessories Engineering plastic lamp holder & lamp support Cable gland in engineering plastic duly fixed in housing on one side 2 way 5 Amp. G. F. P. mains connector for 1.0 sq. mm incoming cable Earthing terminal for 14 SWG earthing wire INSTALLATION Suitable for Wall/ Surface mounting with 2 Nos. of holes provided on the housing. Cable entry from side Suitable for 1 x 9 W CFL ( TC-S) lamp DIMENSION DRAWING Wkp Mounting c/c 120 mm ø 5 hole 2 no. 77 Cable Gland 1/2 OD ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WKP x 9 W CFL (TC-S) 230/

47 WKG 13 INDUSTRIAL BULKHEAD luminaire IP 43 SPECIFICATIONS Die cast aluminium housing painted white fitted with heat resistant glass dome, rubber gasket and zinc plated wire guard Conforms to IS 10322/ Part 5/ Sec. 1: 1987 WkG 13 Accessories Lamp holder 2 pin BC porcelain 2 way 5 Amps G.F.P. mains connector for 1 sq. mm incoming cable Earthing terminal for 14 SWG earthing wire Suitable for 19 mm ET cable entry Lamp holder is pre-wired upto terminal block INSTALLATION Suitable for wall/ ceiling mounting with lugs OPTIONAL FEATURES Epoxy painting Loop in - Loop out External earthing terminal Suitable for 40/ 60/ 100 W GLS lamps DIMENSION DRAWING Wkg c/c 100 Cable Entry 3/4 175 c/c 110 ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WKG x 40 W GLS 230/ WKG x 60 W GLS 230/ WKG x 100 W GLS 230/

48 48

49 wipro lighting LEADERS in Cleanroom lighting Dedicated team of cleanroom lighting specialists Vision range is designed and developed by technical experts with a sound understanding of a cleanroom. Our dedicated cleanroom lighting specialists constantly strive to provide the most efficient yet effective solutions. Conformity to international standards VISION range conforms to international guidelines for USFDA - Food and Drug Administrative Procedures and GMP - Good Manufacturing Practices. This puts VISION amongst the very best in cleanroom lighting category across the world. Design and develop customised solutions Cleanroom lighting requires immense experience and expertise to meet specific applications. Over the years, we have designed and developed more than 400 customised product variants catering to the ever-evolving needs of Pharmaceutical, Food & Beverages and Electronics & Semi Conductor Industries. more than 15 years of experience Since 1993, we have been addressing the changing needs and requirements of various industries using cleanroom environments. Today, most leading companies choose Vision luminaires as the preferred choice for their cleanrooms. over 500 successful installations The installed base of Vision luminaires spans across geographies, landscapes and industry segments. With as many as 500 successful installations, Vision is uniquely positioned as the leader in cleanroom lighting.

50 VISION [ WIF 42/ WIP 43 ] RECESS MOUNTED IP 54 BOTTOM OPENING CLEANROOM LUMINAIREs IP 54 SPECIFICATIONS Luminaire consists of precisely manufactured, powder coated, white bottom frame and CRCA housing, reflector & control gear tray Bottom frame is fixed with captive (loss proof) screws Virgin PMMA (non-yellowing grade) clear acrylic diffuser is sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing Bottom frame and clear acrylic cover, with gasket and pressure clamps, ensures dust proofing Pre-anodized high purity specular finish aluminium reflector ensures precise light distribution Reflector is snap fitted with specially designed Delrin clamps for faster installation and maintenance Starters are accessible after removal of bottom frame. Removable gear tray helps in faster maintenance Surface finish in epoxy polyester powder coating lends higher corrosion resistance & life long finish Loop-in, loop-out facility to save cost of cables and switches Slim open type low loss ballasts mounted on removable gear tray and are pre-wired upto terminal block Suitable for Class 10,000 & 100,000 cleanroom applications Suitable for POP/ Gypboard ceiling system Conforms to IS 10322/ Part 5/ Sec. 1 : 1987 wif 42 wip 43 CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) WIF 42 - Suitable for 2 x 36 W FTL (T8) Lamps WIP 43 - Suitable for 2 x 36 W and 3 x 36 W CFL (TC-L) Lamps DIMENSION DRAWING WIF 42 DIMENSION DRAWING wip c/c c/c ceiling cut out = 1240 x 240 mm ceiling cut out = 581 x 581 mm ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x 36 W FTL (T8) 230/ WIF SGW 2 x 36 W FTL (T8) 230/ WIP x 36 W CFL (TC-L) 230/ WIP SGW 2 x 36 W CFL (TC-L) 230/ WIP x 36 W CFL (TC-L) 230/ WIP SGW 3 x 36 W CFL (TC-L) 230/

51 VISION [ WIF 52/ WIP 53 ] SURFACE MOUNTED IP 54 BOTTOM OPENING CLEANROOM LUMINAIREs IP 54 SPECIFICATIONS Luminaire consists of precisely manufactured, powder coated, white bottom frame and CRCA housing, reflector & control gear tray Bottom frame is fixed with captive (loss proof) screws Virgin PMMA (non-yellowing grade) clear acrylic diffuser is sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing Slim open type low loss ballasts mounted on removable gear tray and are pre-wired upto terminal block Bottom frame and clear acrylic cover, with gasket and pressure clamps, ensures dust proofing Pre-anodized high purity specular finish aluminium reflector ensures precise light distribution Reflector is snap fitted with specially designed Delrin clamps for faster installation and maintenance Starters are accessible after removal of bottom frame. Removable gear tray helps in faster maintenance Surface finish in epoxy polyester powder coating lends higher corrosion resistance & life long finish Loop-in, loop-out facility to save cost of cables and switches Suitable for Class 10,000 & 100,000 cleanroom applications Conforms to IS 10322/ Part 5/ Sec. 1 : 1987 wif 52 wip 53 CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) WIF 52 - Suitable for 2 x 36 W FTL (T8) lamps WIP 53 - Suitable for 2 x 36 W and 3 x 36 W CFL (TC-L) lamps DIMENSION DRAWING WIF 52 DIMENSION DRAWING wip c/c c/c ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x 36 W FTL (T8) 230/ WIF SGW 2 x 36 W FTL (T8) 230/ WIP x 36 W CFL (TC-L) 230/ WIP SGW 2 x 36 W CFL (TC-L) 230/ WIP x 36 W CFL (TC-L) 230/ WIP SGW 3 x 36 W CFL (TC-L) 230/

52 VISION + [ CIF 15/ CIP 15 ] RECESS MOUNTED IP 65 TOP OPENING CLEANROOM LUMINAIREs IP 65 (Lamp Compartment) SPECIFICATIONS Luminaire consists of CRCA Bottom frame, Housing, Housing cover, parabolic reflector and control gear, Top frame, Top cover, compartment duly epoxy polyester powder coated in white Virgin non-yellowing grade PMMA transparent diffuser is sealed with bottom frame using 3M Base adhesive XLPE gasket and specially designed pressure plates ensures positive locking & dust proofing Top frame is designed in such a way that Brick/ RCC bund is not required incase of RCC Slab Specially designed Jack mounting system using `J Bolts, ensure precise and faster installation of luminaire C. G. Cover snap fitted with clip-on mechanism for faster installation and maintenance Starters are accessible after removal of snap fit control gear cover Surface finish in Epoxy Polyester powder coating lends higher corrosion resistance & longer service finish Specular finish, pre-anodized high purity parabolic aluminium reflector ensure excellent light control Specially designed self locking HYPLON gasket mechanism for housing & top cover, ensures tool free maintenance and reduces maintenance time Loop in - Loop out facility saves the cost of cable & switches Slim open type low loss ballast mounted on removable gear tray and pre-wired upto terminal block Suitable for Class 100, 1000 & 10,000 Cleanroom Application Conforms to IS 10322/ Part 5/ Sec. 1: 1987 CIF 15/ CIP 15 INSTALLATION Designed for installation in RCC slab/ metallic walkable sandwich panel ceiling with through & through cut CIF 15 - Suitable for 2 x 36 W FTL (T8) Lamps CIP 15 - Suitable for 2 x 36 W and 3 x 36 W CFL (TC-L) Lamps CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) DIMENSION DRAWING CIF 15/ CIP 15 T Cat. No. Ceiling c/o (A) Luminaire c/o (B) CIF x x 280 CIP x x 625 CIP x x 625 B A T = ceiling thickness ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) CIF x 36 W FTL (T8) 230/ on request 01 CIF SGW 2 x 36 W FTL (T8) 230/ on request 01 CIP x 36 W CFL (TC-L) 230/ on request 01 CIP SGW 2 x 36 W CFL (TC-L) 230/ on request 01 CIP x 36 W CFL (TC-L) 230/ on request 01 CIP SGW 3 x 36 W CFL (TC-L) 230/ on request 01 Housing and Top frame with Top Cover, are packed separately 52

53

54 VISION [ WIF 75/ WIP 75 ] RECESS MOUNTED IP 65 TOP OPENING TYPE CLEANROOM LUMINAIREs IP 65 (Lamp Compartment) SPECIFICATIONS Luminaire consists of anti-corrosive precisely manufactured, epoxy polyester powder coated, white bottom frame cum housing, top frame, top cover, housing cover, parabolic reflector & control gear compartment Clear acrylic diffuser is sealed with bottom frame and non- hygroscopic VHB gasket to ensure dust proofing Virgin non-yellowing grade clear acrylic diffuser is sealed with 3M base adhesive. XLPE gasket and specially designed pressure plates ensure positive sealing, dust proofing & IP65 lamp compartment C. G. cover snap fitted with clip-on mechanism for faster installation and maintenance Starters are accessible after removal of snap fit control gear cover resulting in faster maintenance Surface finish in epoxy polyester powder coating lends higher corrosion resistance & longer service finish Specular finish, pre-anodized high purity parabolic aluminium reflector ensure excellent light control Specially designed self locking HYPLON mechanism for housing cover and top cover helps in quick maintenance Loop-in, Loop-out facility saves the cost of cables & switches Slim open type low loss ballasts mounted on gear tray and pre - wired up to terminal block Suitable for Class 100, 1000, cleanroom applications Conforms to IS 10322/ Part 5/ Sec. 1 : 1987 wif 75 wip 75 CONTROL GEAR OPTIONS Electronic control gear Sigma (SGW) Digital electronic control gear with Active Power factor correction Active (APF) WIF 75 - Suitable for 2 x 36 W FTL (T8) lamps WIP 75 - Suitable for 2 x 36 W and 3 x 36 W CFL (TC-L) lamps DIMENSION DRAWING WIF 75/ WIP 75 Bund Top frame and top cover Cat. No. Ceiling c/o (A) Luminaire c/o (B) WIF x x 280 WIP x x 625 WIP x x 625 RCC Slab B A ELECTRICAL DATA Cat. No. lamp rated Voltage (V) Mains Current (A) Approx. Weight (kg) Case Lot (in nos) WIF x 36 W FTL (T8) 230/ on request 02 WIF SGW 2 x 36 W FTL (T8) 230/ on request 02 WIP x 36 W CFL (TC-L) 230/ on request 02 WIP SGW 2 x 36 W CFL (TC-L) 230/ on request 02 WIP x 36 W CFL (TC-L) 230/ on request 02 WIP SGW 3 x 36 W CFL (TC-L) 230/ on request 02 Housing and Top frame with Top Cover, are packed separately 54

55

56

57 LIGHT COLOUR AND COLOUR RENDERING The light colour of a lamp is described in terms of the colour temperature T f and units Kelvin (K). The Kelvin temperature scale begins at absolute zero (0 Kelvin -273 C). The colour temperature of a light source is defined by comparison with the colour of a black-body radiator. A black-body radiator is an idealised solid body e.g. made of platinum which absorbs all light hitting it and therefore has a reflective radiance of zero. When a black body is heated slowly, it passes through gradations of colour from dark red, red, orange, yellow and white to blue light. The higher the temperature, the whiter the colour. The temperature in K of a black body radiator at which it has the same colour as the light source being measured is the most similar colour temperature of that light source. Lamps with the same light colour can emit light of completely different spectral composition and therefore quite different colour rendering properties. It is not possible to draw conclusions about the quality of colour rendering from the light colour. The light colour of lamps Light Colour Colour Temperature in Kelvin Warm White < 3300 Neutral White Daylight White > 5000 Despite identical light colour, the different colour rendering properties of lamps lead to variations in colour perception. Where, for instance, the spectrum of a lamp contains only a little red light (right), red surface colours are only imperfectly rendered. Colours have a significant bearing on the way we experience our surroundings. Whether a room has a warm or cold atmosphere is determined by the materials in it and their colours. The way the colours of objects are perceived, however, depends also on the colour rendering properties of the lighting. The colour rendering index Ra indicates how well colours are rendered by lamps. Where lamps have a high index of 90 or more, all colours are rendered very accurately; where the index is lower, the colours we perceive are corrupted. Reds then look orange, greens appear yellow. Lamps are divided for convenience into colour rendering categories. Most lamps have a colour rendering index of over 80 and thus render colours well enough for us to perceive them as natural. Incandescent lamps, tungsten halogen lamps, certain metal halide lamps and a number of fluorescent lamps have a colour rendering index of over 90, which means they render all colours very accurately. 57

58 Lamp Information International Code Wattage (W) Length (mm) Diameter (mm) Lamp Holder Luminous Flux (Lumen)/ Intensity (Cd) Colour Temp. (K) Colour Rendering Index (CRI Group) GENERAL LIGHTING SERVICE LAMPS GLS B-22d 415-1A B-22d 710-1A B-22d A COMPACT FLUORESCENT LAMPS TC-D G24d B G24d B G24d B G24d B G24d B G24d B TC-DE G24q B G24q B G24q B TC-L G B G B G B G B G B G B G B G B G B G B G B G B TC-S G B G B G B G B FLUORESCENT LAMPS (T5 TYPE/ HIGH EFFICIENCY) T G B G B G B G B FLUORESCENT LAMPS (T5 TYPE/ HIGH OUTPUT) T G B G B FLUORESCENT LAMPS (TRIBAND PHOSPHOR TYPE) T G B G B 58

59 International Code Wattage (W) Length (mm) Diameter (mm) Lamp Holder Luminous Flux (Lumen)/ Intensity (Cd) Colour Temp. (K) Colour Rendering Index (CRI Group) Metal Halide Lamps HPSV (E) 70* E E E E HPSV (T) E E E HQI-E/ MHL (E) E A E B E A HQI-T/ MHL (T) E A E B E B HIT-de/ HQI-ts Rx7s A Rx7s B Rx7s A Rx7s B HPMV E B-22d E E E * 70 W HPSV (E) lamps are available with both Internal starter as well as without Internal starter Data Provided is indicative. Please refer lamp manufacturer s data for lighting design calculations. 59

60

61

62 RECOMMENDED illumination as per is 3646 [Part 1]: 1992 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) ELECTRICITY GENERATION, TRANSMISSION AND DISTRIBUTION General Plant turbine Houses (operating floor) 200 boiler and turbine house basements 100 boiler houses, platforms, areas around burners 100 switch rooms, meter rooms, oil plant rooms, HV substations (indoor) 150 control rooms 300 relay and telecommunication rooms 300 diesel generator rooms, compressor rooms 150 pump houses, water treatment plant houses 150 battery rooms, chargers, rectifiers 100 precipitator chambers, platforms, etc 100 cable tunnels and basements, circulating water culverts and screen chambers, storage tanks (indoor), operating areas and filling points at outdoor tanks 50 Coal Plant conveyors, gantries, junction towers, unloading hoppers, ash handling plants, settling pits, dust hoppers outlets 100 other areas where operators may be in attendance 150 Nuclear Plants Gas circulation bays, reactor area, boiler platform, reactor charges and discharge face 150 METAL MANUFACTURE Iron Making sinter plant plant floor 200 mixer drum, fan house, screen houses, coolers, transfer stations 150 Furnaces, cupola General 150 control platforms 300 conveyor galleries, walkways 50 Steel Making electric melting shops 200 basic oxygen steel making plants General 150 convertor floor, teeming bay 200 control platforms 300 scrap bays 150 Metal forming and treatment ingot stripping, soaking pits, annealing and heat treatment bays, acid recovery plant pickling and cleaning bays, roughing mills, cold mills, finishing mills, tinning and galvanizing lines, cut up and rewind lines

63 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) General 150 control Platforms 300 wire mills, product finishing, steel inspection and treatment 300 plate/strip inspection 500 Foundries automatic plant without manual operation 50 with occasional manual operation 150 with continuous manual operation 200 control room 300 control platforms 300 non-automatic plants charging floor, pouring, shaking out, cleaning, grinding, fettling 300 rough moulding, rough core making 300 fine moulding, fine core making 500 inspection 500 Forges (Severe vibration is likely to occur) General 300 inspection 500 CERAMICS Concrete products mixing, casting, cleaning 200 Potteries Grinding, moulding, pressing, cleaning, trimming, glazing, firing 300 enamelling, colouring 750 Glass Works furnaces rooms, bending, annealing 150 mixing rooms, forming, cutting, grinding, Polishing, toughening 300 bevelling, decorative cutting, etching, Silvering 500 inspection 500 CHEMICALS Petroleum, Chemical and Petrochemical Works Exterior walkways, platforms, stairs and Ladders 50 exterior pump and valve areas 100 pump and compressor houses 150 process plant with remote control 50 process plant requiring occasional manual intervention 100 permanently occupied work stations in process plant 200 control rooms for process plant 300 Pharmaceutical Manufacturer and Fine Chemicals Manufacturer 63

64 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) pharmaceutical manufacturer, Grinding, granulating, mixing, drying, tableting, sterilizing, washing, preparation of solutions, filling, capping, wrapping, hardening 500 fine chemical manufacture exterior walkways, platforms, stairs and ladders 50 process plant 100 fine chemical finishing 500 inspection 500 Soap Manufacture General area 300 automatic processes 200 control panels 300 machines 300 Paint Works General 300 automatic processes 200 control panels 300 special batch mixing 750 colour matching 1000 MECHANICAL ENGINEERING Structural Steel Fabrication General 300 marking off 500 Sheet Metal Works pressing, punching, shearing, stamping, spinning, folding 500 bench work, scribing, inspection 750 Machine and Tool Shops rough bench and machine work 300 medium bench and machine work 500 fine bench and machine work 750 Gauge rooms 1000 Die Sinking Shops General 500 fine work 1500 Welding and Soldering Shops Gas and arc welding, rough spot welding 300 medium soldering, brazing, spot welding 500 fine soldering, fine spot welding 1000 Assembly Shops rough work for example, frame and heavy machine assembly 300 medium work, for example, engine assembly, vehicle body assembly

65 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) fine work, for example, office machinery assembly 750 very fine work, for example, instrument assembly 1000 minute work, for example, watch making 1500 Inspection and Testing Shops coarse work, for example, using go/no go gauges, inspection of large sub-assemblies 500 medium work, for example, inspection of painted surfaces 750 fine work, for example, using calibrated scales, inspection of precision mechanisms 1000 very fine work, for example, inspection of small intricate parts 1500 minute work, for example, inspection of very small instruments 2000 Points Shops and Spray Booths dipping, rough spraying 300 preparation, ordinary painting, spraying and finishing 500 fine painting, spraying and finishing 750 inspection, retouching and matching 1000 Plating Shops vats and baths 300 buffing, polishing, burnishing 500 final buffing and polishing 750 ELECTRICAL AND ELECTRONIC ENGINEERING Electrical Equipment Manufacture manufacture of cables and insulated wires, winding, varnishing and immersion of coils, assembly of large machines, simple assembly work 300 medium assembly, for example, telephones, small motors 500 assembly of precision components, for example, telecommunication equipment, adjustment, inspection and calibration 1000 assembly of high precision parts 1500 Electronic Equipment Manufacture printed circuit board silk screening 500 hand insertion of components, soldering 750 inspection 1000 assembly of wiring harness, cleat-ing harness, testing and calibration 750 chassis assembly 1000 inspection and testing: soak test 200 safety and functional tests 300 FOOD, DRINK AND TOBACCO Slaughter Houses General 300 inspection

66 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) Canning, Preserving and Freezing Grading and sorting of raw materials 750 preparation 500 canned and bottled goods retorts 300 automatic processes 200 labeling and packaging 300 frozen foods process area 300 packaging and storage 300 Bottling, Brewing and Distilling Key washing and handling, bottle washing 200 Key inspection 300 process areas 300 bottle filling 750 Edible Oils and Fats Processing refining and blending 300 production 500 Mills-Milling, Filtering and Packing 300 Bakeries General 300 hand decorating, icing 500 Chocolates and Confectionery Manufacture General 300 automatic processes 200 hand decoration, inspection, wrapping and packing 500 Tobacco Processing material preparation, making and packing 500 hand Processes 750 TEXTILES Fibre Preparation bale breaking, washing 300 stock dyeing, tinting 300 Yarn Manufacture spinning, roving, winding, etc 500 healding (drawing in) 1000 Fabric Production Knitting 500 weaving Jute and hemp

67 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) heavy woollens 500 medium worsteds, fine woollens, cottons 750 fine worsteds, fine linens, Synthetics 1000 mending 1500 inspection 1500 Fabric Finishing dyeing 300 calendering, chemical treatment, etc 500 inspection Grey cloth 1000 final 1500 Carpet Manufacture winding, beaming 300 setting pattern, tufting cropping, trimming, fringing, latexing and latex drying 500 designing, weaving, mending 750 inspection General 1000 piece dyeing 750 LEATHER INDUSTRY Leather Manufacture cleaning, tanning and stretching, vats, cutting, fleshing, stuffing 300 finishing, scarfing 500 Leather Working General 300 pressing, glazing 500 cutting, splitting, scarfing, sewing 750 CLOTHING AND FOOTWEAR Clothing Manufacture preparation of cloth 300 cutting 750 matching 750 sewing 1000 pressing 500 inspection 1500 hand tailoring 1500 Hosiery and Knitwear manufacture flat bed knitting machines 500 circular knitting machines 750 lockstitch and over locking machine 1000 linking or running on

68 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) mending, Hand finishing 1500 inspection 1500 Glove Manufacture sorting and grading 750 pressing, Knitting, cutting 500 sewing 750 inspection 1500 Hat Manufacture stiffening, braiding, refining, forming, sizing, pounding, ironing 300 cleaning, flanging, finishing 500 sewing 750 inspection 1500 Boot and Shoe Manufacture sorting and grading 1000 clicking, closing 1000 preparatory operations 1000 cutting tables and pressure 1500 bottom stock preparation, lasting, bottoming, finishing, shoe room 1000 Rubber washing, compounding, coating, drying, varnishing, vulcanizing, calendering, cutting 300 lining, making and finishing 500 TIMBER AND FURNITURE Sawmills General 200 head saw 500 Grading 750 Woodwork Shops rough sawing, bench work 300 sizing, planning, sanding, medium machining and bench work 500 fine bench and machine work, fine sanding, finishing 750 Furniture Manufacture raw material stores 100 finished goods stores 150 wood matching and assembly, rough sawing, cutting 300 machining, sanding and assembly, polishing 500 tool rooms 500 spray booths colour finishing 500 clear finishing 300 cabinet making 68

69 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) vaneer sorting and grading 1000 marquetry, pressing, patching and fitting 500 final inspection 750 Upholstry Manufacture cloth inspection 1500 filling, covering 500 slipping, cutting, sewing 750 assembly 500 tape edging 1000 PAPER AND PRINTING Paper Mills pulp mills, preparation plants 300 paper and board making General 300 automatic process 200 inspection, sorting 500 paper converting processes General 300 associated printing 500 Printing Works type foundries matrix making, dressing type, hand and machine coating 300 front assembly, sorting 750 composing rooms hand composing, imposition and distribution 750 hot metal keyboard 750 hot metal casting 300 photo composing keyboard or setters 500 paste up 750 illuminated tables - general lighting 300 proof presses 500 proof reading 750 Graphic Reproduction General 500 precision proofing, retouching, etching 1000 colour reproduction and inspection 1000 printing machine room presses 500 premake ready 500 printed sheet inspection

70 TYPE OF INTERIOR OR ACTIVITY Average Illuminance (lux) binding folding, pasting, punching and stitching 500 cutting, assembling, embossing 750 PLASTIC AND RUBBER Plastic Products automatic Products without manual control 50 with occasional manual control 100 with continuous manual control 300 control rooms 300 control platforms 300 non-automatic plant mixing, calendering, extrusion, injection, compression and blow moulding, sheet fabrication 300 trimming, cutting, polishing, cementing 500 printing, inspection 1000 Rubber Products stock preparation - plasticizing, milling 200 calendering, fabric preparation, stock cutting 500 extruding, moulding 500 inspection 1000 DISTRIBUTION AND STORAGE Work Stores 150 unpacking, sorting 200 large item storage 100 small item rack storage 300 issue counter, records, storeman s desk 500 Warehouses and Bulk Stores storage of goods where identification requires only limited preparation of detail 100 storage of goods where identification requires perception of detail 150 automatic high bay rack stores Gangway 20 control station 200 packing and despatch 300 loading bays 150 Cold Stores General 300 breakdown, make-up and despatch 300 loading bays

71 branch addresses NORTH F-16, Okhla Industrial Area, Phase I, New Delhi Tel: ; Telefax: sandeep.kaushik@wipro.com S.C.O , Sector - 34A, Chandigarh Tel: / / ; Fax: rajiv.sharma3@wipro.com E/149, Transport Nagar, Lucknow Kanpur Road, Lucknow Tel: / neeraj.yadav@wipro.com B-16/17, Palsania Complex, Near T B Hospital, Subhash Nagar Shopping Centre, Jaipur Tel: / ambuj.singh@wipro.com 6-J, Compound, Lasudia Mori, Opp.police Station, Indore Tel: , akhilesh.chouhan@wipro.com Western UP/ Uttarakhand Haridwar amitkumar.suryan@wipro.com SOUTH No.139, 7th Cross, N S Palya, Off: Bannerghatta Road, Bangalore Tel.: Fax: jagannivasan.mohanraj@wipro.com Door No 33 & 34, PVG Complex, GK Industrial Estate, Ganesh Nagar, Alapakkam Chennai Tel: / jude.gomez@wipro.com No.41, Chokkampudur Main Road, Sriram Nagar, Telungupalayam Post, Coimbatore Tel: / philipose.philip@wipro.com 2nd Floor, Kummancherry Hardwares Building, Opp. Hotel Sea Gate, Pathadipalam, South Kalamassery, Changampuzha Nagar PO, Cochin Tel: sujithkumar.murugan@wipro.com Madurai (Tamilnadu) philipose.philip@wipro.com Mangalore (Karnataka) raviraja.padebettu@wipro.com EAST 3, Pretoria Street, 3rd Floor, Kolkata Tel: / 9891; Fax: arpan.bhattacharya@wipro.com WEST Wilson House, 3rd Floor, Nagardas Road, Andheri (E), Mumbai Tel: , Fax: gurjit.singh@wipro.com 203/ 204, Hindustan Kohinoor Complex, Next to HCC, LBS Marg, Vikhroli - West, Mumbai Tel: gurjit.singh@wipro.com CENTRAL Bhosale Heights, 1195/5, Fergusson College Road, Pune Tel: / ; Fax: agrawal.saurabh@wipro.com A/210, Fairdeal House, Opp. St. Xavier s Hostel, Swastik Char Rasta, Navrangpura, Ahmedabad Tel: / prakash.asudani@wipro.com 311, Pujer Complex, Subhanpura, Baroda Tel: / 35/ 36/ 41/ 45; Fax: agupta.anurag@wipro.com 103, Shriniketan Apartments, Nargunkar layout, Deo Nagar, Khamla Road Nagpur Telefax: prashant.rananaware@wipro.com Plot No., 13 A/ 1, Road No 9, IDA East Division Nacharam, R. R. District, Hyderabad Tel: / muralidhar.naykar@wipro.com D. No. 1-99, Sirigudinagar, Yendada, Visakhapatnam Tel: / vijay.bhaskar@wipro.com CU4, Advani Business Centre, Neelkamal Arcade, Atmaram Broker Road, Above Federal Bank, Panjim, Goa Tel: bharat.nagar@wipro.com c/o. Hindustan Agencies Plot No. 135, Mancheswar Industrial Estate, Bhubaneshwar Tel.: ashok.shaw@wipro.com Rajkot vikram.raut@wipro.com Khasra No.1470/81, P H No.106, Ring Road No.1, Near Jagdamba Mandir, Opp Hotel New Relax, Kushalpur, Raipur Tel: / prashant.raot@wipro.com

72 WIPRO LIGHTING ADVANTAGE Innovative lighting solutions for Manufacturing areas and Cleanrooms through: Energy saving solutions with latest international technologies Capability to service multi-locational accounts Service commitment : More than 20 branches and over 150 dedicated stockists Ease of contact through help-line (toll free) and website Trustworthiness and Reliability of Wipro BUSINESS OFFICE: Wipro Lighting 5th Floor, Godrej Eternia - C, Old Pune - Mumbai Road, Shivaji Nagar, Pune Tel : Fax : helpdesk.lighting@wipro.com REGISTERED OFFICE: Wipro Limited Doddakannelli, Sarajpur Road, Bangalore Tel : Fax : Innovation and Improvement are a way of life at Wipro. We reserve the right to modify the product without prior intimation.