Ceiling Star Installation Instructions

Size: px

Start display at page:

Download "Ceiling Star Installation Instructions"

Norma Small
6 years ago
Views:

1 Revision:1 30/03/11 Ceiling Star Before commencing installation ensure the relevant mains supply Installation should be carried out in accordance with the latest Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, Use only with the approved driver for this product. This luminaire is for indoor use only. IMPORTANT The LED driver must not be covered by ceiling insulation CS-DL-MW/xxx-xxx-xx-xx/xx CS-TS-MW/xxx-xxx-xx-xx/xx CS-TT-MW/xxx-xxx-xx-xx/xx CS-ED-MW/xxx-xxx-xx-xx/xx CS-DB-MW/xxx-xxx-xx-xx/xx Ø75mm ceiling cut out Insulation Spacer Fitting for Optional Insulation Spacer

2 Revision:1 30/03/11 Ceiling Star Before commencing installation ensure the relevant mains supply Installation should be carried out in accordance with the latest Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, Use only with the approved driver for this product. This luminaire is for indoor use only. IMPORTANT The LED driver must not be covered by ceiling insulation CS-DL-MW/xxx-xxx-xx-xx/xx CS-TS-MW/xxx-xxx-xx-xx/xx CS-TT-MW/xxx-xxx-xx-xx/xx CS-ED-MW/xxx-xxx-xx-xx/xx CS-DB-MW/xxx-xxx-xx-xx/xx Ø75mm ceiling cut out

3 Revision:1 07/10/13 Before commencing installation ensure the relevant mains supply Installation should be carried out in accordance with the latest Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, Ceiling Star Adjustable Use only with the approved driver for this product. This luminaire is for indoor use only. IMPORTANT The LED driver must not be covered by ceiling insulation CS-EA-MW/xxx-xxx-xxx/xx/xxx Ø89mm ceiling cut out Insulation Spacer Fitting for Optional Insulation Spacer

4 Revision:1 03/10/13 Before commencing installation ensure the relevant mains supply Installation should be carried out in accordance with the latest Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, Ceiling Star Adjustable Use only with the approved driver for this product. This luminaire is for indoor use only. IMPORTANT The LED driver must not be covered by ceiling insulation CS-EA-MW/xxx-xxx-xxx/xx/xxx Ø 89mm ceiling cut out

5 Revision:1 30/03/11 Ceiling Star IC Before commencing installation ensure the relevant mains supply Installation should be carried out in accordance with the latest Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, Use only with the approved driver for this product. This luminaire is for indoor use only. IMPORTANT The LED driver must not be covered by ceiling insulation CS-IC-MW/xxx-xxx-xx-xx/xx Ø75mm ceiling cut out

6 P1 of 2 Revision:1 12/04/11 Ceiling Star SM Before commencing installation ensure the relevant mains supply Installation should be carried out in accordance with the latest Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, CS-SM-MW/xxxxxx-xx-xx/xx Use only with the approved driver for this product. This luminaire is for indoor use only. IMPORTANT The LED driver must not be covered by ceiling insulation Max. 10m To mains Red/black mains cable Ensure mains is isolated For screwing directly to ceiling: Connect LED driver to mains. Locate LED driver up to 10m away from fitting and feed connector through ceiling. Connect luminaire to LED driver Locate appropriate fixing screws at 85mm centres. Do not tighten fully, however there should be sufficient friction between the screw heads and the keyhole slots to hold the fixture in position. Use a clockwise twist to secure the luminaire to the screws. Tighten screws if necessary.

7 P2 of 2 Revision:1 12/04/11 To driver. Max. 10m Ensure mains is isolated For conduit (BESA) box with 2 /50.8mm centres: Connect driver to mains. House LED driver up to 10m away from fitting and feed wire through conduit to conduit box. Attach a PhotonStar conduit box adaptor plate to the conduit box using two M2.5 screws. Connect the luminaire to the LED driver Secure the luminaire to the adaptor plate using the two protruding screws and twist clockwise to lock into place. Tighten if necessary. Tel:

Revision:2 08/10/13 Ceiling Star Trimless Before commencing installation ensure the

Installation should be carried out by a qualified electrician.

approved driver for this product. This luminaire is for indoor use only.

CS-TL-MW/xxx-xxx-xx-xx/xx Ø75mm ceiling cut out Secure using appropriate, self tapping

8 Revision:2 08/10/13 Ceiling Star Trimless Before commencing installation ensure the relevant mains supply Installation should be carried out in accordance with the latest Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, Use only with the approved driver for this product. This luminaire is for indoor use only. IMPORTANT The LED driver must not be covered by ceiling insulation CS-TL-MW/xxx-xxx-xx-xx/xx Ø75mm ceiling cut out Secure using appropriate, self tapping countersunk screws Twist to fit at desired height Plaster skim ceiling. Ensure the finished surface is level with edge of housing. Flush Recessed

Doodad Tape Light & Halcyon Controller Single Colour Installation Instructions

Doodad Tape Light & Halcyon Controller Single Colour Installation Instructions P 1 of 4 Single Colour Installation Instructions IMPORTANT PLEASE READ BEFORE INSTALLATION Before commencing installation ensure the relevant mains supply has been safely isolated. Installation should