TITLE OF PRESENTATION : Mechanised Belt Cleaning. COALTECH THRUST : Conveyor Belt Cleaning
|
|
- Roxanne Watkins
- 5 years ago
- Views:
Transcription
1 TITLE OF PRESENTATION : Mechanised Belt Cleaning COALTECH THRUST AREA : Conveyor Belt Cleaning PRESENTER : Heine Booysen COALTECH RESEARCH ASSOCIATION SACMA Council Meeting - 2 May 2013
2 Agenda Battery Mini Dozer - Specifications - Flame Proofing Diesel Mini Dozer - Specifications - Flame Proofing Feedback - Mechanised Vacuum Cleaning - Electrical Scraper Cleaning Questions
3 Battery Mini Dozer Based on the M27 Mini Dozer / Track-O The Track-O Mini Dozer
4 Battery Mini Dozer Specifications Physical Characteristics Frame Steel Cabinet Aluminum Length in 2863 mm Width in 705 mm Height (Frame) in 567 mm Height (Bucket elevated to max.) 62.5 in cm Clearance under bucket (at max. height) 37.5 in cm Lifting Capacity Up to 1000 lbs Up to 453 kg Bucket Capacity yd³ 1.13m³ Weight 2200lbs 998 kg Linear Speed 66ft/min 20.1 m/min
5 Battery Mini Dozer Specifications Power Motor 2 Horse Power (HP) 2 HP Gearbox 75:1 Hydraulic Motor Bucket 1 X 2 HP Power Features Battery Included 435 Amps at 6 volts (x4) External AC-DC Battery Charger 1 Battery Pack Amperage 435 Amps (x1) Operating Voltage 24 VDC Full Recharge Time / Battery 8 hours Continuous Run-Time 8 hours (flat surface)
6 Battery Mini Dozer Specifications
7 Battery Mini Dozer Flame Proofing J.A. Engineering was approached to assist Proposal from J.A. Engineering: - Weight: 2,5 to 3 tonnes - Height: 632mm - Length: 2863mm + 150mm (TBC) - Width: 1155mm.
8 Battery Mini Dozer Flame Proofing
9 Battery Mini Dozer Flame Proofing
10 Battery Mini Dozer Flame Proofing
11 Battery Mini Dozer Flame Proofing
12 Diesel Mini Dozer Based on the Dougless 900 The Dougless 900 Mini Dozer
13 Diesel Mini Dozer Specifications Engine Lombardini 2 Cylinder, Air Cooled, Fuel Injected Diesel Continuous Power 12.0kW Donaldson Top Spin Pre-cleaner and custom filter assembly Air filter system includes blocked filter indicator Hydraulic System Hydraulic Motors Danfoss Hydraulic Pumps Parker (Direct Drive) Proportional Solenoids Danfoss Return Filter In Line Oil Cooler System Protection Hydraulic Oil High Temp Auto Thermal Fan Hydraulic Oil Low Level Shut Off Engine Oil Low Pressure Shut Off Bucket Struck capacity 0.10m³ 4 in 1 Bucket Type Self leveling
14 Diesel Mini Dozer Specifications Angle of Departure 20 Degrees Worklights Front and Rear Tracks Rubber Tracks Multi-idlers Hydraulic Tensioning Arrangements Speed 3.5 KPH Safety Features and Options - Automatic shutdown if the controller is dropped or tilted more than 45 degrees. - Optional laser barriers available. - Cameras Remote Control Systems Conforms to ASNZ Radio Remote Control for Mining Equipment, and ASNZ Cranes Part 1: General Requirements. Remote Control Features - IP65 Hand Control Two Joystick Controls - Display calibration of the proportional functions - Spare Battery - Automatic frequency selection with 16 unique frequencies
15 Diesel Mini Dozer Flame Proofing Minprovise was approached. David Rutter will be in SA mid May. Conceptually: - Cost of developing a flame proof unit ± US$ Dimensions will change, order of magnitude ± 200mm
16 Feedback Mechanised Vacuum Cleaning - In discussions with Hencom
17 Feedback Mechanised Vacuum Cleaning (cont.)
18 Feedback Mechanised Vacuum Cleaning (cont.) * Flame Proof
19 Feedback Electrical Scraper Cleaning - In discussion with Brokk and Explolabs
20 Feedback Electrical Scraper Cleaning - Brokk Attachment
21 Questions Double click to start the video
TITLE OF PRESENTATION : Mechanised Belt Cleaning. COALTECH THRUST : Engineering & Underground Mining
TITLE OF PRESENTATION : Mechanised Belt Cleaning COALTECH THRUST AREA : Engineering & Underground Mining PRESENTER : Jeroen Maaren COALTECH RESEARCH ASSOCIATION SACEA Northern Region - 31 Oct 2013 Safety
More informationR70 June. 2009, rev 002 SPECIFICATIONS. McCloskey R70. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R70 1 DESCRIPTION Heavy duty mobile screener with following features: - 9x4 heavy duty high energy 2 bearing screenbox. - 63Kw (84Hp) JCB 444 diesel engine. - Track mobile. - Direct
More informationTechnical specification Cold milling machine W 2200
Technical specification Cold milling machine W 2200 Technical specification Cold milling machine W 2200 Milling width max. Milling depth * 1 7 3 (2,200 mm) 0 14 (0 350 mm) Milling drum Tool spacing 15
More informationTechnical Specification
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
More informationS190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 SPECIFICATIONS McCloskey S190 1 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp Cat engine. - Track or wheel mobile. - Integrated
More informationConveyor Layouts 1-1 SECTION 1 OVERVIEW 1-1. Conveyor Manuals 1-1 Using this Manual 1-2. New Construction 1-1 Extensions or Modifications 1-1
SECTION 1 OVERVIEW 1-1 Conveyor Layouts 1-1 New Construction 1-1 Extensions or Modifications 1-1 Conveyor Manuals 1-1 Using this Manual 1-2 Component Details Section 1-2 Assembly and Installation Section
More informationCC3060 TYPE 12 COMPACT CABINET COOLER AIR-TO-WATER FLUSH-MOUNT MODEL
CC3060 TYPE 12 CC3060 13 lbs 9,300 0.3 1 x 6 30 x 8-3/4 x 4 Efficiency: 68.8 Watts / C T based on average internal cabinet temperature. 2. CC3060 Rated cooling: 2,725 Watts mounted to an uninsulated 72
More informationSKID STEER LOADER From World First to World Leader
TS80V2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S EPA Final Tier 4 Emission Compliant - Maintenance
More informationTS80V2 Skid Steer Loader
Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Product Features & Specifications ENGINE --Four Cylinder Turbocharged Deutz Diesel Engine -U.S. - EPA FINAL
More informationTS80V2 Skid Steer Loader
Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Specifications TOUGH, POWERFUL, RELIABLE Pressure Relieving Coupler Flat Faced Couplers High Flow Hydraulics
More informationZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)
ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA
More informationJ50 Apr. 2011, issue 006 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
More information1021F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
1021F XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make FPT Model F2CFE614C Emissions Certification Tier 4 Interim Type 4-stroke, turbocharged and air-to-air cooled Cylinders 6-cylinder in-line Bore/Stroke
More information1121F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
1121F XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make FPT Model F2CFE614B Emissions Certification Tier 4 interim Type 4-stroke, turbocharged and air-to-air cooler Cylinders 6-cylinder in-line Bore/Stroke
More informationInformation brochure Kran Mobil PK 34
Information brochure Kran Mobil PK 34 For maintenance of assembly lines and production lines Zunhammer GmbH Biebing 19 D-83301 Traunreut Tel. 08669/8788-0 Fax 8788-33 www.kran-mobil.de info@kran-mobil.de
More informationTS80V2 Ski d Steer Loader
TS80V2 Ski d Steer Loader Those in the know, know Takeuchi TS50R TS50V TS60R TS60V TS80R 2 TS80V 2 Product Features & Speciications ENGINE HYDRAULIC AND WORKING EQUIPMENT - Four Cylinder Turbocharged Deutz
More informationS130 Nov. 2006, issue 005 SPECIFICATIONS. McCloskey S130. All specifications are current as of this printing, but are subject to change
S130 SPECIFICATIONS McCloskey S130 1 DESCRIPTION Heavy duty mobile screener with following features: - 14x5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat engine. - Track or wheel mobile. - Integrated
More informationTechnical specification. Stabilizer WR 2000 XL
Technical specification Stabilizer WR 2000 XL Technical specification Working width max. Working depth * 1 Milling and mixing rotor Tool spacing Stabilizer WR 2000 XL 7 10 (2,400 mm) 0 20 (0 500 mm) 13
More informationJ50 Nov. 2009, issue 000 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
More informationBS-10LS - Swivel Head Metal Cutting Band Saw 468 x 250mm (W x H) Rectangle Capacity
BS-10LS - Swivel Head Metal Cutting Band Saw 468 x 250mm (W x H) Rectangle Capacity Ex GST Inc GST $4,890.00 $5,379.00 ORDER CODE: MODEL: Operation Type: Round @ 90º (mm): Round @ 45º (mm): Round @ 60º
More informationQJ331 Jaw Crusher Features & Benefits Revision
QJ331 Jaw Crusher Features & Benefits Revision 03 08-09-2014 1 Sandvik Mobiles Hopper Feeder Crusher Main Conveyor Controls Engine Tracks Options Benefits Overview 2 Sandvik Mobiles Hopper 2505mm x 4500mm
More informationR105 April. 2009, issue 004 SPECIFICATIONS. McCloskey R105. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R105 1 DESCRIPTION Heavy duty mobile screener with following features: - 12x4.5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat diesel engine. - Track mobile. - Direct
More informationApplication Of Belt Winder For Conveyor Replacements In Coal Handling Plants Of Thermal Power Stations
Application Of Belt Winder For Conveyor Replacements In Coal Handling Plants Of Thermal Power Stations By: Makarand Joshi Email: makarandj@hotmail.com 1.0 Abstract: - Conveyors are seen on virtually all
More information921F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
921F Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Type Cylinders Bore/Stroke FPT F4HFE613 Tier 4 Final 4-stroke, turbocharged and air-to-air cooled 6-cylinder
More information1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation
1021F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Case / FPT Model F2CFE614C Tier 4 interim certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore / Stroke 4.61 in x 5.31 in (177
More information77 Ton Tele-Boom Crawler Crane. mantiscranes.com
15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
More informationi54 Sept. 2009, issue 006 SPECIFICATIONS McCloskey i54 All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i54 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - Universal 1200mm (47") diameter x 1350mm (53") wide Impactor. - 430Hp C13 Cat engine. - Track or Track
More informationSPECIFICATIONS. McCloskey S130 3-Deck S130 3D. Oct. 2013, issue 002 DISTRIBUTOR FOR AFRICA
SPECIFICATIONS McCloskey S130 3-Deck DESCRIPTION Heavy duty mobile Screener with following features: - 14x5 heavy duty high energy 2 bearing 3 deck screenbox. - 100Hp Cat engine. - Track or wheel mobile.
More informationSKID STEER LOADER From World First to World Leader
TS80R2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S. EPA FINAL TIER 4 Emission Compliant - Maintenance
More informationHITACHI ELECTRIC CHAIN HOISTS
HITACHI ELECTRIC CHAIN HOISTS Hitachi s reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability
More informationCX80C OPERATOR ENVIRONMENT
CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder
More informationPowertrack 800 INTRODUCING THE
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
More informationTL12 Compact Track Loader
Those in the know, know Takeuchi TL12 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - EPA Interim Tier 4 Compliant - Turbocharged and Intercooled - DOC+DPF Exhaust
More informationEngine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications
Engine Model Caterpillar 3056E DIT ATAAC Rated Net Power @ 2,300 rpm SAE J1349 96 kw 129 hp ISO 9249 97 kw 130 hp EEC 80/1269 97 kw 130 hp Maximum Net Power @ 1,900 rpm SAE J1349 102 kw 137 hp ISO 9249
More informationThose in the know, know Takeuchi. TL12V2 Track Loader TL12V2
Those in the know, know Takeuchi TL12V2 Track Loader TL8 TL10 TL12 TL12V2 ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged and Intercooled - DOC+DPF+SCR Exhaust After Treatment - Active
More informationHIGH SPE E D, H I GH P ER F O R M ANC E, H I G H E F F I C I E NC Y
845E/L845E FELLER BUNCHER THE 845E An efficient and agile, high performance mid-sized feller buncher with limited tail-swing and outstanding service access. THE L845E Equipped with Tigercat s levelling
More information939C Hystat Track-Type Loader
Engine Four-stroke cycle, in-line six cylinder Cat 3046 turbocharged diesel engine. Ratings at 2400 RPM* kw HP Gross power 74.6 100 Net power 67.9 90 The following ratings apply at 2400 RPM when tested
More informationPC8000 Super Shovel. PC8000 Super Shovel HYDRAULIC MINING SHOVEL SPECIFICATIONS
PC8000 Super Shovel Operating Weight 720 t 1,600,000 lb Shovel Capacity 38 m 3 50 yd 3 SAE 2:1 heaped Main Drive Diesel 3000 kw 4,020 HP Electric 2900 kw PC8000 Super Shovel SPECIFICATIONS HYDRAULIC MINING
More informationMOBILE 72 WB Wireless Local Area Network (Wlan). Electro hydraulic mobile hoist. Working load limit: 7,200kg per post.
39A Lillee Crescent, Tullamarine, Victoria 3043 T: (03) 9338 4633 F: (03) 9338 7098 E: info@melbournejackrepairs.com.au W: www.melbournejackrepairs.com.au MOBILE 72 WB Wireless Local Area Network (Wlan).
More information700i TECHNICAL SPECIFICATION. MOBILE JAW CRUSHER With CAT C9 Engine. Technical Specification CRUSHERS. SCREENERS. BULK HANDLING
700i MOBILE JAW CRUSHER With CAT C9 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self-Contained Mobile Jaw Crusher with the following features: 300Hp CAT C9 Tier III Diesel
More informationTechnical Description R 9350 Hydraulic Excavator
Technical Description R 9350 ydraulic Excavator litronic` Operating Weight with Backhoe Attachment 302,0 t/665,800 lb Operating Weight with Shovel Attachment 310,0 t/683,400 lb Engine Output 1120 kw (1500
More informationTELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY
TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
More information1121G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
1121G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F2CFE614F Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More informationCONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
More informationTL6R COMPACT TRACK LOADER. Operating Weight: 3,395 kg. From World First to World Leader
COMPACT TRACK LOADER TL6R From World First to World Leader Operating Weight: 3,395 kg Product Features & Specifications ENGINE - EU Stage III B / EPA Tier 4 Emission Compliant - Turbocharged - DOC+DPF
More information6. Document tasks performed during visit and report any observations to the appropriate
Chiller Annual Maintenance RFP Attachment B Services Required Tasking: Vibration Analysis 1. All work shall be performed in accordance with safety policies 2. Check with appropriate customer representative
More information623CT. TECHNICAL SPECIFICATION Subject to change without notice.
623CT MOBILE IMPACT CRUSHER with CAT C9-T3 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self Contained Mobile Impact Crusher with the following features: 275Hp CAT C9 Tier
More informationS190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 Nov. 2006, issue 006 SPECIFICATIONS McCloskey S190 1 Nov. 2006, issue 006 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp
More information1021G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
1021G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F2CFE614H Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More information873 Heavy Duty Screener
R 873 873 Heavy Dty Screener preliminary specification SPECIFICATION: Screen Size: 3660mm x 1530mm (12 x 5 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 83kW (111.3hp) Tier 3 / Stage IIIA:
More informationTELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY
TELESCOPIC BOOM CRAWLER CRANE 6010 30 TON CAPACITY OPTIONAL EQUIPMENT ACCESS WALKWAYS VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive
More information121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED
121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 C*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3
More information621F/XT/XR ENGINE (CONTD.)
621F//XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Model Type Cylinders Bore / Stroke Case / FPT F4HFE613Z Tier 4 Interim certified 4-stroke, turbocharged and air-to-air-cooled 6-cylinder in-line
More information21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED
21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 B*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3 (3.4
More informationTIGERCAT FORWARDERS, ARE DESIGNED TO ACHIEVE HIGH PRODUCTION AND LOWEST COST PER TONNE IN THE WORLD S MOST DEMANDING TRANSPORTING APPLICATIONS.
C-SERIES FORWARDERS TIGERCAT FORWARDERS, ARE DESIGNED TO ACHIEVE HIGH PRODUCTION AND LOWEST COST PER TONNE IN THE WORLD S MOST DEMANDING TRANSPORTING APPLICATIONS. Innovative low-wide bunk system with
More informationROUGH TERRAIN CRANE GR-160N
ROUGH TERRAIN CRANE GR-160N JAPANESE SPECIFICATIONS OUTLINE H-type Outrigger SPEC. NO. Control No. JA-01 GR-160N 1. Crane Specifications Crane Crane Capacity 6.5 m boom 16,000 kg x 3.0 m (6-part line)
More informationTechnical specification. Cold milling machine W 2100
Technical specification Cold milling machine W 2100 Technical specification Cold milling machine W 2100 Milling width max. Milling depth * 1 2,200 mm 0 320 mm Milling drum Tool spacing 15 mm Number of
More informationTechnical specification. Recycler WR 2400
Technical specification Recycler WR 2400 Technical specification Working width (max.) Working depth * 1 Milling and mixing rotor Tool spacing Recycler WR 2400 2,400 mm 0 500 mm 20 mm Number of tools 186
More informationTL12R-2 COMPACT TRACK LOADER. Operating Weight: 5,710 kg. From World First to World Leader
COMPACT TRACK LOADER TL12R-2 From World First to World Leader Operating Weight: 5,710 kg Product Features & Specifications ENGINE - EU Stage IV / EPA Tier 4 Emission Compliant - Turbocharged and Intercooled
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More informationTL8 COMPACT TRACK LOADER. Operating Weight: 3,915 kg. From World First to World Leader
COMPACT TRACK LOADER TL8 From World First to World Leader Operating Weight: 3,915 kg Product Features & Specifications ENGINE - EU Stage III B / EPA Tier 4 Emission Compliant - Turbocharge - DOC+DPF Exhaust
More informationi44r Jul. 2012, issue 001 SPECIFICATIONS McCloskey i44r All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i44r 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1050mm (42") diameter x 1100mm (43") wide Impactor. - 350Hp Cat C9 engine. - Track or Track c\w Wheel
More informationZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified
More information821G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
821G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE613S Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More informationTL8 Compact Track Loader
Those in the know, know Takeuchi TL8 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged - DOC+DPF Exhaust After
More information921F/XT/XR WHEEL LOADERS
921F/XT/XR WHEEL LOADERS ENGINE Make FPT Model F4HFE6131 Tier 2 certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore/Stroke 4.09 in x 5.20 in (104 X 132 mm) Displacement 411 in 3 (6.7
More information921G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
921G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE613R Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More informationS P E C I F I C A T I O N S
S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m
More informationCX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED
CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel tolerant Water-cooled,
More informationZAXIS. 210/210LC-5 n 119 kw (159 hp)
n 119 kw (159 hp) EnginE Manufacturer and Model... Isuzu 4HK1 Non-Road Emission Standards... certified to IT4 / Stage IIIB emissions Net Rated Power (ISO 9249)... 119 kw (159 hp) @ 1,900 rpm Cylinders...
More informationTel: Fax: INTRODUCING THE. Commander 510
Sales & Rentals LLC 11901 Westport Rd, Louisville, KY 40245 Tel:502 326 9300 Fax:502 326 9305 Email:sales@powerscreensales.com INTRODUCING THE FEATURES Total weight Width (transport) 2.47m (8' 1") Length
More informationFlat-out value proven productivity, reliability, durability.
RC120 COMPACTORS Flat-out value proven productivity, reliability, durability. A machine needs to work to earn its keep. Rhino Equipment Vibratory Soil Compactors are well equipped to perform a wide range
More informationZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards
More informationProduct presentation. Lokotrack ST3.8 mobile screen
Product presentation Lokotrack ST3.8 mobile screen 1 Metso Minerals ST3.8 Product Presentation ST458 product presentation ST3.8 Technical specifications - Transport dimensions Dimension Metric English
More information521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE413NB Tier 4 Final SCR/DOC 4-stroke, turbocharged
More informationELECTRIC SCHEMATICS LS1 LS2. "1532ES / 1932ES" Service & Parts Manual - ANSI Specifications March 2008 Page 5-9 ART_2236 ART_2243
ELECTRIC SCHEMATICS NOTES: (Unless otherwise specified). Switch S BASE/PLATFORM makes contact from the CENTER to the LEFT position when placed in BASE.. Switch S UP/DOWN makes contact from the CENTER to
More informationIC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006
Engineering Spec IC-20-G Page 1 of 7 Replaces: Form BD104G Dated: May 2004 The IC-20-1G is a self-propelled industrial crane designed for in-plant lifting and material handling applications. It is powered
More informationSandvik LH307 Technical Specification
Technical Specification APPLICATIONS is a 6,7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development work, mining and tunnelling construction.
More informationCX55BMTS OPERATING WEIGHT. Cab with 165 lb (75 kg) operator, 247 lb (112 kg) bucket, full fuel and standard equipment: 11,312 lb (5 130 kg)
CX55BMTS COMPACT EXCAVATOR TIER 4 FINAL CERTIFIED ENGINE Model Yanmar 4TNV88-C-PYB Tier 4 Final Certified Cylinders 4 Bore/ 3.46 x 3.54 in (88 x 90 mm) Displacement 133.6 in 3 (2.2 L) Fuel injection Direct
More informationHPP1 MK6-15A/20A R00 Owners Manual
J Wolmarans Page 1 2018/10/23 Page 1 of 7 TABLE OF CONTENTS Page 1 Introduction...2 2 Model...2 3 Safety warnings...2 4 Contents...2 5 Features...2 6 Installation...3 6.1 Mounting the unit:...3 6.2 Connecting
More informationQS441 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty fixed hopper design enables
More informationMini Hydraulic Excavator
302.5 Mini Hydraulic Excavator Cat 3013 Naturally Aspirated Diesel Engine Flywheel Power 17.1 kw 22.9 hp Operating Weight With canopy 2660 kg 5864 lb With cab 2783 kg 6135 lb 302.5 Mini Hydraulic Excavator
More informationLX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm
S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40
More information302.5C Mini Hydraulic Excavator
302.5C Mini Hydraulic Excavator Engine Rated net power 18.6 kw 24.9 hp (ISO 9249) Weights Operating weight 2745 kg 6,052 lb with canopy Operating weight 2850 kg 6,283 lb with cab Weight with rubber tracks,
More informationTAG2A TAG3A. Series kwm 1500/1800 rpm kwm 1500/1800 rpm ElectropaK. Ratings. Basic technical data
4006-23TAG2A 527-746 kwm (Gross) @ 1500/10 rpm 4006-23TAG3A 566-839 kwm (Gross) @ 1500/10 rpm ElectropaK 4000 Series Basic technical data Number of cylinders....................................................6
More informationPURE LEAD PLUS UPS APPLICATIONS. Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications Watts per Cell
UPS 12-1121 PURE LEAD PLUS Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications 305-545 Watts per APPLICATIONS Data Centers Network Operations Centers Industrial Process Control
More information521F/XT/XR ARTICULATED
521F/XT/XR ARTICULATED WHEEL LOADER TIER 4 INTERIM CERTIFIED PRELIMINARY engine Model CNH CFPXL04.5SCB, F4HFE413J Tier4a/Stage 3b 4-stroke, turbocharged Type Cylinders 4 Bore/Stroke 4.09 in x 5.20 in (104
More informationMODEL CMS INSTALLATION INSTRUCTIONS A. INTRODUCTION 1. USAGE 2 2. HOW IT OPERATES 2 B. SPECIFICATIONS 1. ELECTRICAL 3 2.
CONVEYOR COMPONENTS COMPANY 130 Seltzer Road, PO Box 167 Croswell, MI 48422 USA PHONE: (810) 679-4211 TOLL FREE (800) 233-3233 FAX: (810) 679-4510 Email: info@conveyorcomponents.com http://www.conveyorcomponents.com
More information1, 2, 4, 6, 8, 10 and 12 in. (50, 100, 150, 200, 254, 300 mm) for all models Clevis Ends
M-Track DC Motor Acme Screw Up to 65 lb. (74 N) Rated Load Up to.75 in. (45 mm)/sec. Travel Speed M-Track compact units are completely self-contained and sealed to allow use in small spaces without sacrificing
More informationDL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationTHE TIGERCAT H855E SERIES HARVESTERS ARE DURABLE, RELIABLE AND EFFICIENT.
H855E/LH855E HARVESTER THE H855E Well matched to a wide variety of high volume harvesting and processing applications. THE LH855E Equipped with Tigercat s leveling undercarriage, the LH855E is an excellent
More informationInline 6 series turbocharger with exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) Valves per Cylinder 4
SPECIFICATIONS Engine Manufacturer and Model John Deere PowerTech PSS 6090 Non-Road Emission Standards EPA Final Tier 4/EU Stage IV Configuration Inline 6 series turbocharger with exhaust gas recirculation
More information2050M. Transmission cooling: Tube and fin Core size in 2 (0.33 m 2 ) (2) 12-volt, low-maintenance 950 cold-cranking 0 F (-18 C)
2050M LT/XLT/WT/LGP CRAWLER DOZER TIER 4 INTERIM CERTIFIED ENGINE Model FPT F4HFE613J Tier 4 Interim Certified Cylinders 6 Displacement 409 in 3 (6.7 L) Fuel injection Fuel Fuel filter Air intake Direct
More informationL-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION
L-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 BOOST YOUR PRODUCTIVITY POWER AND EFFICIENCY Drawbar pulling leadership: the hydrostatic
More informationJCB MINI EXCAVATORS 8016 & 8018
JCB MINI EXCAVATORS & OPERATING WEIGHT: NETT ENGINE POWER: 59 kg (55 lbs) & kg ( lbs). kw (9 hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model A Sprocket idler centres 7 (-) 7 (-) B Undercarriage
More informationCentro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
More informationARMTRAC 75T-230 CAB SPECIFICATIONS T H I S I S A C O N T R O L L E D D O C U M E N T. SPEC/A75T/1CAB/3.00/ Page 1 of 5
ARMTRAC 75T-230 CAB SPECIFICATIONS SPEC/A75T/1CAB/3.00/08.2018 Page 1 of 5 SPEC/A75T/1CAB/3.00/08.2018 Page 2 of 5 STATIC DIMENSIONS A Track length (Diameter) 3091 mm H Track width outside 2023.5 mm B
More informationMini Excavator 8018 CTS
NEW Mini Excavator Operating Weight: 1822 kg (4016 lb) Net Engine Power: 14.2 kw (19 hp) A Product of Hard Work MINI EXCAVATORS OPERATING WEIGHT: 1822 kg (4016 lbs) NET ENGINE POWER: 14.2 kw (19hp) K D
More informationQS331 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty hopper sides 5m³ / 6.5yd³ nominal
More information530R WHEEL LOADER. Bucket Capacity 2.8 m 3 to 4.5 m 3 (3.7 yd 3 to 5.9 yd 3 ) Net Horsepower 155 kw (208 hp) Operating Weight kg (41,535 lb)
530R WHEEL LOADER Net Horsepower 155 kw (208 hp) Bucket Capacity 2.8 m 3 to 4.5 m 3 (3.7 yd 3 to 5.9 yd 3 ) Operating Weight 18840 kg (41,535 lb) WHEEL LOADER An innovative machine with state-of-the art
More information