2014 U.S. Light Duty Price List

Transcription

1 2014 U.S. Light Duty Price List

2 Lifts Shockwave Equipped TM Two-Post Lift Options Shockwave Equipped 2-Post lifts include: 2X faster rise/descent speed. 110v DC power unit, built in battery charger. Spotline laser with motion sensor to aid in centering vehicles in the bay. Base plate covers and your choice of arm configurations (base plate covers on 7K and 10K configurations only). (2) 24 Series batteries are REQUIRED but NOT INCLUDED. SPOA10-SW Same as SPOA10 2-post lift only Shockwave Equipped. Standard with 2- stage arms, flip-up adapters and True Asymmetrical design for easy vehicle entry. Used on framed vehicles. 81" (2064 mm) $8,401 SPOA10-RASW SPOA10-TASW SPOA7-MPSW SPOA7-HYSW SPO10-SW Same as SPOA10-RA 2-post lift only Shockwave Equipped. Standard with 3-stage FRONT arms and round adapters. Primarily used on unibody vehicles. (To use with framed vehicles, also order FJ6197.) Same as SPOA10-TA 2-post lift only Shockwave Equipped. Standard with 3-stage FRONT arms and truck adapters. Primarily used on framed vehicles. Includes (4) 3 1/2" FJ extensions and (4) 5" FJ extensions. Same as SPOA7-MP only Shockwave Equipped. Standard with drive-over moveable pad for quick service with low 2 3/4" profile. Includes (4) FJ2428E spacer blocks and hinged approach ramps. Primarily used on unibody vehicles. Shockwave Equipped EXCLUSIVE! True Asymmetrical design. Standard with unique Patent Pending front pad and 3-stage REAR arms for maximum productivity. Includes (4) 2" rubber pads. Primarily used on unibody vehicles. Same as SPO10 only Shockwave Equipped. Standard with 2-stage arms, flip-up adapters and True Symmetrical design. Used on framed vehicles. Shockwave Equipped TM SmartLift** 77" (1956 mm) 77" (1956 mm) 7,000 lbs. (3175 kg) 7,000 lbs. (3175 kg) $8,737 $8,737 $11,114 Same as SPO10 only Shockwave Equipped. Standard With Front and Rear 78" SPO10-TASW 3 Stage Arms Truck Adapter. Comes with (4) FJ Extensions 3 1/2 $9,197 (1981 mm) Tall and (4) FJ Extensions 5 Tall. SPO12-SW Shockwave Equipped SmartLifts include: 2X faster rise/descent speed. 110v DC power unit, bulit in battery charger. Spotline laser with motion sensor and your choice of superstructures. (2) 24 Series batteries are REQUIRED but NOT INCLUDED. Same as SPO12 only Shockwave Equipped. Standard with 3-stage FRONT and REAR arms and truck adapters. Includes (4) 3 1/2" FJ extensions and (4) 5" FJ extensions. 76" (1930 mm) 77" (1956 mm) 81" (2064 mm) SPO10-RASW Same as SPO10 only Shockwave Equipped. Standard With Front and Rear 77" 3 Stage Arms with Round Adapter. (1956 mm) $9,197 75" (1905 mm) $9,094 $8,401 $11,838 SL210-MP8SW Shockwave Equipped SmartLift with moveable pads and standard controls. Includes (4) 3" FJ2428E, (4) 1 1/2" FJ2427E spacer blocks and the FJ2487 rubber pad kit. 73 3/8" (1864 mm) 8,000 lbs. (3629 kg) $14,087 SL210-FASW Shockwave Equipped SmartLift. Equipped with TRIO superstructure and FLIP-UP adapters. Primarily used on framed vehicles. 81 1/2" (2045 mm) $14,087 Shockwave Equipped SmartLift. Standard with TRIO superstructure and 75 7/8" SL210-RASW (1927 mm) $14,087 Rubber Adapters. Primarily used on unibody vehicles. Shockwave Equipped SmartLift. Standard with TRIO superstructure and 75 7/8" SL210-TASW Truck Adapters. Primarily used with trucks and other frame vehicles. (1927 mm) $14,087 SL212-SW Same as SL212 only Shockwave Equipped. Standard with Truck Adapters. 84 1/4" (2140 mm) Bench Controls Shockwave Equipped TM bench control list price adder. $900 $17,071 * NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position. Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor. **NOTE: All SmartLifts and SmartLift Finish Kits Include 50 of 1/4 Airline And Fittings To Be Used For Lock System. NOTE: Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions And Order Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions And Cancellation Penalties. Some colors may not be available. Consult Factory For Pricing. 2

3 Lifts Rotary Lift offers the option to split SL orders so that the high pressure inground assembly portion of the lift can be shipped ahead of the rest of the lift. To do this, you should order one high pressure inground kit and one kit from the lists below. There is a $104 list price fee for this option. High pressure inground kits include everything needed to install the inground portion of the lift. Finish kits include the superstructure, power unit and parts box. Shockwave Equipped TM High Pressure Inground Assembly T SL210-MP8SW SL210-FASW SL210-RASW Shockwave Equipped TM Retrofit Kits T Equips existing SL210 SmartLifts (500 series and above) with 8 plungers and arm style superstructures with Shockwave features. $4,708 T Equips existing SmartLifts with 8 plungers and moveable pad style superstructures with Shockwave features. $4,708 T Equips existing SmartLifts with 8 plungers and arm style superstructures with Shockwave bench control features. $5,626 T Equips existing SmartLifts with 8 plungers and moveable pad style superstructures with Shockwave bench control features. $5,626 N539 Shockwave Inground Portion Only For Split SL Orders -- Both Conventional and LDS (Liquid Detection System) Versions. Shockwave Equipped kit with TRIO superstructure and FLIP-UP ADAPTERS. 81 1/2" (2045 mm) 76 7/8" (1953 mm) Column Base Plate Cover. Fits SPOA7-200 and above, SPOA9-200 and above, all SPOA10 and SPO series lifts. 10,000 or $8,714 (4536 or 5443 kg) Shockwave Equipped TM Finish Kits** (require High Pressure Inground Assembly) SL210-TASW SL212-SW FA7814BK N9110 Shockwave Equipped kit with MOVABLE PAD superstructure. For SmartLifts with 8 1/2" plungers. Includes (4) 1 1/2" FJ2427E spacer blocks, (4) 3" FJ2428E spacer blocks and mounting hardware. Also includes FJ2487 rubber pad kit. Shockwave Equipped kit with TRIO superstructure and RUBBER ADAPTERS. Shockwave Equipped kit with TRIO superstructure and TRUCK ADAPTERS. Includes (4) 3 1/2" T extensions and (4) 5" T extensions. Shockwave Equipped kit with TRIO superstructure and TRUCK ADAPTERS. Includes (4) 3 1/2" T extensions and (4) 5" T extensions. 73 3/8" (1864 mm) 76 7/8" (1953 mm) 8,000 lbs. (3629 kg) Bench Controls Shockwave Equipped TM Finish Kits bench control list price adder. $900 Shockwave Equipped TM Completion Kit Shockwave Equipped TM Accessories 76 7/8" (1953 mm) $5,477 $5,477 $5,477 $5,477 $8,461 SL210 and SL212 Shockwave Equipped completion kit. Contains 8 1/2" plungers, equalizers, guide T barrels, cylinders, hoses, lock components and hardware. To make a complete lift also requires a $7,059 future/relocation kit (T110177) and a kit. No power unit included. $49 each Spotline TM laser spotting retrofit kit. $607 Pull Out Arm for SPOA7-HYSW $1,122 T Smartlift DC Control Pedestal Kit (No cost if ordered with lift). $198 * NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position. Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor. **NOTE: All SmartLifts and SmartLift Finish Kits Include 50 of 1/4 Airline And Fittings To Be Used For Lock System. NOTE: Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions And Order Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions And Cancellation Penalties. Some colors may not be available. Consult Factory For Pricing. 3

4 Surface Mounted Lifts Two-Post Lift Options Conventional: Includes standard two hand operation and mechanical release. Surface Mounted, 2 stage flip-up arms, Frame Contact Lift. Electric- SPOA10 Hydraulic Operation. True Asymmetrical Design For Easy Vehicle Entry. 78" Factory Rotated Columns Allow Doors Of Vehicle To Be Fully Opened (1981 mm) $6,079 While Properly Positioned On Lift. Arm Restraints -- All Arms. SPOA10-RA with 3-stage RA arms SPOA10-TA with 3-stage TA arms SPOA7-MP N2244YL N2224N2225YL Conventional / Two-Post / Asymmetric Same as SPOA10 with 3-stage FRONT arms and round adapters. 3-stage arms allow for an increase in overall arm sweep and minimum arm reach to precisely lift vehicles that are: Primarily Uni-body construction; Visually marked OE designated pick-up points on the vehicle; Wider stance and lower profile; Accommodates short and long wheelbase vehicles (for use with frame vehicles, also order FJ6197). Same as SPOA10 with 3-stage FRONT arms and truck adapters. Primarily for use with frame vehicles. (For RA adapters also order FJ6225). Comes with (4) FJ Extensions 3 1/2 Tall and (4) FJ Extensions 5 Tall. Surface Mounted, Movable Pad Drive Over Type with True Asymmetrical Design for Easy Vehicle Entry. Factory Rotated Columns Allow Doors of Vehicle to be Fully Opened while Properly Positioned on Lift. Overhead Equalization System. Electric-Hydraulic Operation. Includes (4) FJ2428E Spacer Blocks and Hinged Approach Ramps. Dual Control / Two-Post / Asymmetric Three-Stage Arm / Movable Pad Retrofit Kits 74" (1880 mm) 7,000 lbs. (3175 kg) Three-stage telescoping arms for accommodating smaller vehicles without excessive maneuvering of vehicle (for models SPOA9 and SPOA Series). Kits include four arms. Three-stage telescoping arms for accommodating smaller vehicles without excessive maneuvering of vehicle (for model SPOA Series). Kits include four arms. * NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position. Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor. **NOTE: All SmartLifts Include 50 of 1/4 Airline And Fittings To Be Used For Lock System. NOTE: Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions And Order Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions And Cancellation Penalties. Some colors may not be available. Consult Factory For Pricing. Common Two-Post Lift Accessories 73" (1854 mm) 74" (1880 mm) EH (Extended Height) Auxiliary Adapters For Use When Raising Certain Vans Or Pick-Ups. Maximum FJ6115BK** Height 14 3/8" (365 mm). Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary Lift Manufactured Since October Includes (4) FJ696 Adapters and $398 2 Piece Column or Wall-Mounted Adapter Rack FJ6114. Extended height auxiliary adapters version of FJ (76 mm) additional rise for a total 17 3/8 (454 FJ6195YL** $266 mm). Includes a set of (2) FJ6196 adapters. Capacity is 2,500 lbs. (1,134 kg) maximum per adapter. EH (Extended Height) Required To Lift 1988 Or Newer General Motors GMT400 Pickup Trucks. Maximum FJ6133BK Height: 14" (356 mm) Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary Lift Manufactured Since October Includes (4) FJ6101 Adapters and $423 2 Piece Column or Wall-Mounted Adapter Rack FJ6114. Set of four (4) FJ6214 rubber adapters. Required for use on 3-stage arms when lifting trucks or other frame vehicles. FJ6197 Series: SPO and up; SL Series 800 and below (not for TRIO arms) and SPO10 and SPOA10 models with 3 $407 stage arms. $6,415 $6,415 $8,792 $1,696 $1,696 FJ6227 Movable pad retro kit for model SPOA series and above. Reduces lift capacity to 7,000 lbs. $4,406 Shorter version of FJ6115. Kit includes a set of (4) FJ6212 adapters and 2 piece column or wall mounted FJ6212KITYL** $356 adapter rack FJ6114. Adapter height 7 3/8. Capacity 2,500 lbs. (1,134 kg) maximum per adapter. FJ6225 Set of four (4) FJ6202 round adapters and 2 piece column wall-mounted adapter rack. For use on 3-stage arms when lifting Uni-body construction vehicles. $407 Three Phase Power Adapter Extension Kit for SPO/A10 RA/TA, SPO12TA 3-stage, SL210 3-stage (800 series & below) and FJ7880BK SL212 Lift Models (not trio arms). Provides additional lifting height when vehicles require additional clearance or use on front or rear to level vehicle on lift. Includes four (4) FJ (3.5" tall extension), four $308 (4) FJ (5" tall extension) and FJ6127 rack kit with mounting hardware. Power Unit Option Optional 4-HP 3kw, 3 Phase, 60 Hz Power Unit For Use With Four-Post Series, SL Series, Two-Post Overhead Design Lifts Only. Must Specify When Ordering. Price In Addition To Standard Unit Price. 208/230 or 460 Volt Must Be Specified. $351 ** NOTE: All Accessories Shown Above May Be Used With Most Frame Contact Models. See pages for all accessories. Fits any Surface Mounted or Inground, Frame-Engaging Rotary Lift, Manufactured Since October

5 SPO12- TALC SPO15 SPO15-LC FJ5115 SPO18 SPO18-LC Surface Mounted Lifts Surface Mounted, Frame Contact Lift. Clear Floor, Arm Restraints -- All Arms, Electric-Hydraulic Operation. With Overhead Adjustments of 15 ft., 15 ft. 6 in., 16 ft. and 16 ft. 6 in. Includes Air Operated Single Point Release Locking Latches. Comes with Stack Adapters. Same As Above With Overhead Adjustments of 13 ft. 6 in. and 14 ft. 6 in. Surface Mounted, Frame Contact Lift. Overhead Equalization System, Arm Restraints -- All Arms, Electric-Hydraulic Operation. With Overhead Adjustments of 15 ft., 15 ft. 6 in., 16 ft. and 16 ft. 6 in. Includes Air Operated Single Point Release Locking Latches. Same As Above With Overhead Adjustments of 13 ft. 6 in. and 14 ft. 6 in. 78" (1981 mm) 89 1/2" (2273 mm) 15,000 lbs. (6804 kg) * NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position. NOTE: Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions And Order Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions And Cancellation Penalties. Some colors may not be available. Consult Factory For Additional Pricing. $17,983 $17,983 $3,103 $24,758 $24,758 Additional RISE Additional 3 rise available for SPO10 and SPOA10 models. Specify Additional 3 -RISE when ordering. $254 Additional RISE Additional 3 rise available for SPO12 models. Specify Additional 3 -RISE when ordering. $254 EH1 For 10,000 lb. models: Includes 3 additional rise standard and provides 1 ft, extended height (models SPO10 and SPOA10). $495 EH1 EH2 EH2 Conventional / Two-Post / Symmetric Same As SPO10 With Front and Rear 3 Stage Arms with Truck Adapter. Comes with (4) FJ Extensions 3 1/2 Tall and (4) FJ Extensions 5 Tall. Surface Mounted, Frame Contact Lift For Low Ceiling Application. Overhead Equalization System, Arm Restraints -- All Arms, Electric-Hydraulic Operation. Comes with Truck Adapter and (4) FJ Extensions 3 1/2 Tall and (4) FJ Extensions 5 Tall.Total Height 11 8 (2 Lower Than Standard). 89-1/2" (2273 mm) SPO10 Surface Mounted 2 stage flip-up arms, Frame-Contact Lift. Overhead Equalization System. 78" Electric-Hydraulic Operation. Arm Restraints -- All Arms. (1981 mm) $6,079 SPO10-RA Same As SPO10 With Front and Rear 3 Stage Arms with Round Adapter. 74" (1880 mm) $6,875 75" SPO10-TA (1905 mm) $6,875 Surface Mounted, Frame Contact Lift With Front and Rear 3 Stage Arms with Truck Adapter and 81-1/16" SPO12-TA (4) FJ Extensions 3 1/2 Tall and (4) FJ Extensions 5 Tall. $9,516 (2059 mm) Same as SPO12-TA only wider to accommodate Hummer vehicles. Width overall = /8 and height SPO12-HMR overall /2. $10, /16" SPO12-HMR- (2136 mm) Same as SPO12-HMR with height overall /2. $10,816 EH1 Aircraft Tug Adapters. Converts An SPO15 Lift From A Vehicle Lift Into A 14,000 lbs. Aircraft Tug Lift. Kit Contains Two Cross Beams And Adapters. Technician Productivity Options 18,000 lbs. (8165 kg) For 12,000 lb. models: Includes 3 additional rise standard and provides 1 ft, extended height (model SPO12). $785 $9,975 For 10,000 lb. models: Includes 3 additional rise standard and provides 2 ft, extended height (models SPO10 and SPOA10). $800 For 12,000 lb. models: Includes 3 additional rise standard and provides 2 ft, extended height (model SPO12). $1,069 Seismic Option You can purchase specific models of SPOA Series Lift with a seismic rated baseplate. This plate is 2.7" longer and 8" wider. This allows the lift to be installed in an area with a spectral response acceleration of 2.1 with only 6" of concrete where it would require 12" of concrete with the standard baseplate. Contact Customer Service for more details. Seismic model of the DC(SW) SPOA10 Std. Hgt. lift with TA arms Seismic model of the DC (SW) SPOA10 Std. Hgt. lift with RA arms Seismic model of the 1ø SPOA10 68" Rise Std. Hgt. lift with TA arms Seismic model of the 1ø SPOA10 68" Rise Std. Hgt. lift with RA arms Seismic model of the DC (SW) SPOA7 Std. Hgt. Low Arm lift $150 Arm Kit Rail Bolster Kit Two-Post Lifts for Turf Maintenance Conventional / Two-Post / Turf Maintenance 2-Post Surface Mounted Lift Electric-Hydraulic Operation. Can Accommodate 3 or 4 68" TL07 Wheel Vehicles. (1727 mm) $9,268 7,000 lbs. TL07-EH2 Same As TL07 Above -- Provides 2' extra height and 3 additional rise. 71" (3175 kg) $10,068 TL07-EH4 Same As TL07 Above -- Provides 4' extra height and 3 additional rise. (1803 mm) $10,676 N257KITYL FA Arm Kit To Convert TL07-200/400 Series To A Lift For Passenger Cars and Light Trucks. $1,701 N2206YL FA Arm Kit To Convert TL Series To A Lift For Passenger Cars and Light Trucks. $1,701 FJ5123YL Rail Bolster Kit for SPO9-200/400 Series. Derates Lift to 7,000 lbs. capacity (3175kg). $4,906 FJ5204YL Rail Bolster Kit for SPO Series and Above. Derates Lift to 7,000 lbs. capacity (3175 kg). $4,906 *Lift Rise Is Measured From Floor Level To Top Of Adapters. 5

6 Surface Mounted Lifts Four-Post Lifts Shockwave Equipped TM Four-Post Lift Options Shockwave Equipped 4-Post lifts include: 2X faster rise/descent speed. 110v DC power unit, built in battery charger. Wallmount laser with motion sensor to aid in centering vehicles in the bay. 90 o mounting bracket (included) for the power unit gives the option for two mounting positions. (2) 24 Series batteries are REQUIRED but NOT INCLUDED. NEW! SMO14S-SW SMO14L-SW SMO14EL2-SW SM14S-SW SM14L-SW SM14EL2-SW FA647 S Shockwave Equipped OPEN FRONT or Open Rear Surface Mounted, Runway-Type, Drive-On Lift, With 20" Wide Fixed Runways. Runways and Ramps Have An Oil Resistant, Non-Skid Coating. Includes Dual Function Sentinel Lock System (Patented), Filter Lubricator Regulator (Part # S130080). Electric-Hydraulic Operation. Includes Adjustable Latch Bars. Predrilled For Internal Airline Kit. Same As Above Except With Shockwave Equipped CLOSED FRONT. 2 ft. runway extension for SM/SMO 12,000 lb. Series. 2 ft. runway extension for SM/SMO 14,000 lb. Series. 73-3/4" (1873 mm) 73-3/4" (1873 mm) 14,000 lbs. (6350 kg) 14,000 lbs. (6350 kg) MAXIMUM WHEELBASE RANGE 158-1/2" (4025 mm) 192-1/2" (4892 mm) 212-1/2" (5400 mm) 158" (4013 mm) 182-1/2" (4636 mm) 206-1/2" (5245 mm) $12,573 $12,573 $13,110 $10,509 $10,509 $11,044 $679 $908 NOTE: Narrow Bay Models Available For SM/SMO, AR/ARO Series (10 Narrow Overall Width For Narrow Bay Application). Shockwave Equipped TM Four-Post Wheel Alignment Action Rack Systems with Rolling Jacks Stainless Steel Gauges and Rolling Jacks Included! Includes: 158-1/2" ARO14S-SW Shockwave Equipped (1) FC Portable Work (4025 mm) Open Front Action Rack Step Four-Post Lift Level At All Locking Heights 73-3/4" 14,000 lbs. (2) S Stainless Steel (1) Internal Air Line Kit 192-1/2" ARO14L-SW Radius Gauges (4) Wiring Access Holes (1873mm) (6350kg) (4892 mm) (2) 7,000 lb. Cap. Rolling Runways and Ramps have Jacks an Oil Resistant Non-skid (1) Set 4WS Rear Slip Coating ARO14EL2-SW 212-1/2" Plates Filter/Lubricator/Regulator (5400 mm) Patented (Dual Protection FC7117 kit Sentinel Lock System) Shockwave Equipped TM Four-Post Efficiency Packages MAXIMUM WHEELBASE RANGE $740 $31,041 $31,041 $31,550 S100077KIT S Package Includes Two (2) RJ7000 Rolling Bridges And Airline Kit (uninstalled) for SM/SMO14. Package Includes Two (2) RJ6000 Rolling Bridges, Airline Kit (uninstalled), bolt-on alignment package and stainless steel radius gauge for SM/SMO123. $8,698 $11,559 S Package Includes Two (2) SJ6000 Swing Air Jacks And Airline Kit (uninstalled) for SM/SMO123. $9,659 S S Package Includes Two (2) RJ7000 Rolling Bridges, Airline Kit (uninstalled) And S Bolt-On Alignment Package. Package Includes Two (2) SJ8000 Swing Air Jacks, Airline Kit (uninstalled) And S Bolt-On Alignment Package for SM/SMO14. $12,016 $14,449 *NOTE: Lift rise is measured from floor to top of either pad, runway, or adapter in the highest position. 6

7 Surface Mounted Lifts SMO14S SMO14L SMO14EL2 OPEN FRONT or Open Rear Surface Mounted, Runway-Type, Drive-On Lift, With 20" Wide Fixed Runways. Runways and Ramps Have An Oil Resistant, Non-Skid Coating. Includes Dual Function Sentinel Lock System (Patented), Filter Lubricator Regulator (Part # S130080). Electric-Hydraulic Operation. Includes Adjustable Latch Bars. Predrilled For Internal Airline Kit. 73-3/4" (1873 mm) 14,000 lbs. (6350 kg) MAXIMUM WHEELBASE RANGE 158-1/2" (4025 mm) 192-1/2" (4892 mm) 212-1/2" (5400 mm) SM14S 158" (4013 mm) $8,441 SM14L Same As Above Except With CLOSED FRONT. 73-3/4" 14,000 lbs /2" (1873 mm) (6350 kg) (4636 mm) $8,441 SM14EL /2" (5245 mm) $8,976 FA647 2 ft. runway extension for SM/SMO 12,000 lb. Series. $679 S ft. runway extension for SM/SMO 14,000 lb. Series. $908 NOTE: Narrow Bay Models Available For SM/SMO, AR/ARO Series (10 Narrow Overall Width For Narrow Bay Application). $740 SM101 Extended Length Is Ideal For Limousines. 73-3/4" 245" (1873 mm) (6096 mm) $11,585 Three Phase Power SM18 SM18-EL2 SM30 Series Heavy Duty Surface Mounted Runway-Type Drive-On Lift. Runways and Ramps Have An Oil Resistant, Non-Skid Coating. Includes Air Operated Single Point Release Locking Latches, Filter Lubricator Regulator. Electric-Hydraulic Operation. 68" (1727 mm) 18,000 lbs. (8165 kg) 194" (4928 mm) 230" (5842 mm) $10,505 $10,505 $11,042 $12,298 $13,474 SM30-S Overall Length / " $22,964 (5969 mm) 68" 30,000 lbs. 271" SM30-L Overall Length / 8. (1727 mm) (13,608 kg) (6883 mm) $25, " SM30-EL3 Overall Length / 8. (7798 mm) $27,143 S S ft. runway extension for SM18 and SM ft. runway extension for SM /300 and SM30 Series. FA ft. runway extension for SM RFL25 Four-Post Lifts Conventional Four-Post Heavy Duty Surface Mounted Runway-Type Drive-On Lift, With 24" Wide Runway That Can Be Set For Variable Tread Width Setting. Runways and Ramps Have An Oil Resistant, Non-Skid Coating. Includes Air Operated Single Point Release Locking Latches. Internal Air Line with Quick Disconnects, Electric-Hydraulic Operation. Heavy Duty Surface Mounted Runway-Type Drive-On Lift, With 24" Wide Runway That Can Be Set For Variable Tread Width Setting. Runways and Ramps Have An Oil Resistant, Non-Skid Coating. Includes Air Operated Single Point Release Locking Latches. Internal Air Line with Quick Disconnects. Electric-Hydraulic Operation. For Raising Forklifts. Power Unit Option 68" (1727 mm) 25,000 lbs. (11,340 kg) 163" (4140 mm) Optional 4-HP 3kw, 3 Phase, 60 Hz Power Unit For Use With Four-Post Series, SL Series, Two-Post Overhead Design Lifts Only. Must Specify When Ordering. Price In Addition To Standard Unit Price. 208/230 or 460 Volt Must Be Specified. $908 $1,916 $2,592 $30,532 $351 *NOTE: Lift rise is measured from floor to top of either pad, runway, or adapter in the highest position. MACH TM Mobile Lifting Systems Hydraulic Portable Lifts COMBINED TOTAL SYSTEM 52,000 lbs. (23,636 kg) 78,000 lbs. (35,380 kg) MCH413 1 Portable Lift. Wheel Pick-Up, Electro Hydraulic 4-Unit System with Movable 69" Forks. 24VDC Battery Operated with 110 Volt Single Phase Charging. (1753 mm) $41,670** MCH613 1 Portable Lift. Wheel Pick-Up, Electro Hydraulic 6-Unit System with Movable 69" Forks. 24VDC Battery Operated with 110 Volt Single Phase Charging. (1753 mm) $62,505** MCH413 1 Portable Lift. Wheel Pick-Up, Electro Hydraulic 4-Unit System with 69" 52,000 lbs. (without batteries) Movable Forks. Without batteries. (1753 mm) (23,636 kg) $40,300** MCH613 1 Portable Lift. Wheel Pick-Up, Electro Hydraulic 6-Unit System with 69" 78,000 lbs. (without batteries) Movable Forks. Without batteries. (1753 mm) (35,380 kg) $60,540** *Lift Rise Is Measured From Floor Level To Bottom Of Adapter. **Fixed shipping and handling charges of $660 for set of 2, $1,319 for each 4 column set or $1,979 for 6 (). NOTE: MACH accessories can be found on page Not available with wireless communication. Do NOT attempt to upgrade with wireless upgrade kit M

8 Surface Mounted Lifts YA12 YA12-EL1 Alignment Lift - Exclusive Yspace provides techs additional room to work faster and easier compared to traditional scissor lifts, patented design allows for true up/down movement minimizing bay space required. Adjustable radius gauge pockets (radius gauges not included) and oversized slip plates to accommodate 4 wheel alignments on wheelbase ranges from 71 1/2" to 158". Ramp chocks include rollers for smooth operation. Includes (2) RJ6000 rolling jacks, portable work step, internal airline, Filter/ Regulator/Lubricator and Z Turnplate filler kit for 14" x 14" x 1-1/2" radius gauges. NOT AVAILABLE IN 3 PHASE. Same as above with longer wheelbase. 68" (1727 mm) 68" (1727 mm) Drive-On Space Saver General Service Lift Y12 Y12-EL1 Drive-On Space Saver Alignment Rack Flat Top General Service Lift - Exclusive Yspace provides techs additional room to work faster and easier compared to traditional scissor lifts, patented design allows for true up/ down movement minimizing bay space required. Ramp chocks include rollers for for smooth operation. NOT AVAILABLE IN 3 PHASE. Same as above with longer wheelbase. 68" (1727 mm) 68" (1727 mm) SYSTEM Maximun Wheelbase Range 179-1/2" (4559 mm) $33, /2" (4813 mm) $33, /2" (4559 mm) $22, /2" (4813 mm) $22,348 Stainless Steel Gauges and Rolling Jacks Included! Four-Post Wheel Alignment Action Rack Systems with Rolling Jacks ARO14S ARO14L ARO14EL2 Open Front Action Rack Four-Post Lift (2) S Stainless Steel Radius Gauges (2) 7,000 lb. Cap. Rolling Jacks (1) Set 4WS Rear Slip Plates Patented (Dual Protection Sentinel Lock System) Includes: (1) FC Portable Work Step Level At All Locking Heights (1) Internal Air Line Kit (4) Wiring Access Holes Runways and Ramps have an Oil Resistant Non-skid Coating Filter/Lubricator/Regulator FC7117 kit 73-3/4" (1873mm) SYSTEM 14,000 lbs. (6350kg) Maximun Wheelbase Range 158-1/2" (4025mm) 192-1/2" (4892mm) 212-1/2" (5400mm) AR14S AR14L (2) S Stainless Steel (4) Wiring Access Holes 73-3/4" 14,000 lbs. Radius Gauges Runways and Ramps have an 192-1/2" (1873mm) (6350kg) (2) 7,000 lb. Cap. Rolling Jacks Oil Resistant Non-skid Coating (4892mm) Includes: 158-1/2" Closed Front Action Rack Level At All Locking Heights Four-Post Lift (1) Internal Air Line Kit (4025mm) (1) Set 4WS Rear Slip Plates Filter/Lubricator/Regulator AR14EL2 Air Actuated Locking Latches Patented (Dual Protection (1) FC Portable Work Sentinel Lock System) 212-1/2" Step FC7117 kit (5400mm) Heavy Duty Four-Post Alignment $28,973 $28,973 $29,482 $26,910 $26,910 $27,419 AR18 AR18-EL Heavy Duty Surface Mounted Alignment Drive-On Lift. Includes (2) 9,000 lb. capacity rolling jacks, stainless steel radius gauges, internal airline kit, filter/regulator/lubricator, slip plates and necessary mounting hardware. 230v single phase. 68" (1727 mm) 18,000 lbs. (8165 kg) 194" (4928 mm) 230" (5842 mm) $27,995 $30,091 S100077KIT S S S S S S Efficiency Packages Package Includes Two (2) RJ7000 Rolling Bridges And Airline Kit (uninstalled) for SM/SMO14. Package Includes Two (2) RJ6000 Rolling Bridges, Airline Kit (uninstalled), bolt-on alignment package and stainless steel radius gauge for SM/SMO123. Package Includes Two (2) RJ7000 Rolling Bridges, Airline Kit (uninstalled) And S Bolt-On Alignment Package. $8,698 Package Includes Two (2) SJ6000 Swing Air Jacks And Airline Kit (uninstalled) for SM/SMO123. $9,659 Package Includes Two (2) SJ8000 Swing Air Jacks, Airline Kit (uninstalled) And S Bolt-On Alignment Package for SM/SMO14. Conversion Kit Bolt-On Alignment Kit converts SM18/SM180 and SM18EL/ SM180EL lifts to alignment racks. Kits include stainless steel radius gauges, slip plates and ramp modifications and necessary mounting hardware. Rolling jacks are sold separately. 68" (1727 mm) 18,000 lbs. (8165 kg) 194" (4928 mm) 230" (5842 mm) $11,559 $12,016 $14,449 $5,995 $6,251 *NOTE: Lift rise is measured from floor to top of either pad, runway, or adapter in the highest position, except for SmartLift in which rise indicates plunger stroke from ed floor. 8

9 Surface Mounted Lifts Four-Post Lifts Quick Lube Lifts MAXIMUM WHEELBASE RANGE QL12 with ladder Four Post Above Ground Lift For Quick Lube Operation Complete With Walkways and Ladder With Wheels, Drive-On Ramps, Runways, Ladder and Walkways Have An Oil Resistant, Non-Skid Coating. Includes Patented Sentinel Lock System, Electric- Hydraulic Operation and 30 Gallon Drain Pan. 73-3/4" (1873 mm) 182" (4623 mm) $19,786 QL12-EL2 with ladder Same as above, but has extended length walkways. 73-3/4" (1873 mm) 206" (5232 mm) $20,233 QL12 no ladder Same as above, but has full length walkways and no ladder. 73-3/4" (1873 mm) 182" (4623 mm) $19,786 QL12-EL2 no ladder Same as above, but has extended length walkways and no ladder. 73-3/4" (1873 mm) 206" (5232 mm) $20,233 Quick Lube Lifts Accessories S Stationary Platform with Steps-For use with multiple QL12 bay systems 75 x 97 platform with stairs for access to multi bay set up. Stairs have non-skid coating. $8,464 S QL12 drive-thru kit S and D ramps includes front gate. $1,582 S Front Mezzanine- stationary platform in front of lift 25 x 128 $4,912 S Front Mezzanine with Balcony- Stationary platform in front of lift 25 x, 128, balcony attached to front Mezzanine 22 x 69 $5,946 S Movable Front Mezzanine- Front Mezzanine moves with the lift as it raises and lowers 31 x 101 $3, K20 64 crossover with ladder. $1, K21 48 crossover with ladder. $1,860 NOTE: QL products and accessories will no longer be available after September Surface Mounted VersaLifts (Lifting Range 22" - 48") VLXS7 VLXS10 Surface Mounted, Fixed Pad Contact Lift, Electric-Hydraulic Operation, Power Unit Stand. 115V, 1 Phase, 60 Hz Power Unit. Stand Included. 3 Position Adapters included with VLXS10 model only. NOTE: Lift Standard with 18' Hose (5486mm). 22" (559 mm) 22" (559 mm) 7,000 lbs. (3175 kg) $3,572 $5,336 *Lift Rise Is Measured From Floor Level To Top Of Either Pad Or Adapter In The High Position. 9

10 RTP10 with 3-stage RA Arms * Rise Is Measured From Floor Level To Bottom Of Runways. Carbon Steel Radius Gauge Residential / Enthusiast Lifts SYSTEM 9,000 lbs. capacity base plate style open top 2-post lift w/chain over 82" 9,000 lbs. RTP9 $2,817 $4,811 type - hydraulic cylinders. 220v operation. Available in BLUE only. (2083 mm) (4082 kg) RTP12 9,000 lbs. capacity 4-post storage lift. A jack tray along with the 85" 9,000 lbs. RFP9 caster kit and 3 drip pans are included. 110v (standard) or 220v $3,238 (2159 mm) $5,775 (4082 kg) (available) operations. Available in BLACK only. General service 4-post, 180 Wheel Base Max., with 20 wide runways, and jack in-rail kit - anti-sway kit built in system w/standard drive-on 73-3/4" 14,000 lbs. RFP14 $6,912 ramps. 220v operations. Available in BLUE only. (1873 mm) (6350 kg) $4,288 RXLDT Surface mounted frame-contact lift with 3-stage RA arms. Electric hydraulic operation. Combination symmetric/asymmetric column design. Arm restraints on all arms. Single point lock release. Comes with four 1.5, four 3 and four 6 height adapters. Available in BLUE only. 1 Phase 220v operations. 1,000 lb. scissor style drop tail lift with standard features including cycle jack, side extensions, adjustable wheel vise, stop and portable dolly. The lift has five locking positions and provides reversible side extensions to give you extra storage space for tools or more access to service ATV s. The cycle jack gives you rear wheel service access and the front wheel stop and vise helps to positon and secure from movement when lifting and servicing a cycle. The lift comes with an air operated foot pedal. Available in BLACK only. 33" (838 mm) Fully Portable Mid-Rise Lift. Space saving scissor-style design, with swing RMR6 arms and pad adapters, 2 cylinder design powers the lift to full height In 48" 6,000 lbs. less than 30 seconds, multiple locking heights, 115v (standard) or 220v (1219 mm) (2722 kg) $1,923 $3,449 (available) operations. Available in BLACK only. 196K Revolution Two-Post Surface Mount Lifts capacity 2-post lift. Electric hydraulic operation. Arm restraints on all arms and single point lock release. Overhead equalization. Comes with four 4-1/2 and four 8-1/2 adapter height extensions. 220v operation. Available in BLUE only. Revolution Rolling Bridge Internal air for RFP14 4-post lift only. Drive-thru ramps, 51 long for RFP14 only. 77" (1956 mm) 82 1/2" (2095 mm) Revolution Enthusiast Four-Post Surface Mount Lifts Revolution Commercial Four-Post Surface Mount Lifts Revolution Mid-Rise Lifts 1,000 lbs. (454.6 kg) MAP PRICE Three Phase Power Optional 4-HP 3kw, 3 Phase, 60 Hz power unit for use with RTP10, RTP9 (2-post) and RFP14 (4-post) lifts only. Must $351 specify when ordering. Price in addition to standard unit price. 208/230 or 460 volt must be specified. 90 o Power Unit Bracket S To move power unit to front of column for additional space. $35 Internal Air Kit $4,667 $7,803 RRJ70G 7,000 lbs capacity Rolling Bridge Jack with arms and stack adapter. 7,000 lbs. (Hydraulic). (3175 kg) $2,228 $3,170 FA5157KIT 1 each of a carbon steel radius gauge (2 required). Bolt-On Alignment Kit Bolt-on kit to convert RFP14 to alignment rack (radius gauge not included). $3,070 $1,827 $609 each Bolt-On Runway Kit foot bolt-on runway extension kit for RFP14. $1,205 Drive-thru Ramps Extended Aluminum Ramp Kit $2,835 $4,867 4,500 lbs. RRJ45G 4,500 lbs capacity Rolling Bridge Jack with arms and stack adapter. (Manual). $1,454 (2041 kg) $1,019 Revolution Motorcycle Lift Revolution Surface Mount Lift Accessories $1,040 $590 $884 per pair Extended Aluminum Ramps to reduce ramp-up angle for vehicles with low ground clearance. Kit comes S with two (2) aluminum ramps and brackets that will fit hinge-pin style lifts or drop-in style. Ramps are 5 $1,100 longer than the standard ramps. FC663 Jack Tray 7,000# (3175kg) Rolling jack tray for RFP14 only (Bottle jacks not included). $652 Drip Tray SH4D-5555 Additional drip tray (4 needed per lift) for complete coverage. $26 each Drive-thru Ramps SH4D-6000G Drive-thru ramp, 36.5" long for RFP9 only. $137 each Jack Tray SH4D-8050 Additional jack tray for RFP9 only. $180 Solid Deck Kit SH4D-9000 Flooring panel for RFP9 lift to convert lift to solid deck for storage. Panels are 37 wide x 20 long and requires 8 per lift. $75 each TPB10-D1 Door Bumper Kit includes (2) PV-3005 bumpers and hardware. $55 Truck Adapter Kit includes (4) T110564ZN adapters, adapter rack and attachment hardware. Required T100285BK $415 for use when lifting trucks or other frame vehicles. 10

11 SmartLifts SmartLifts are offered with Conventional Controls or with One Touch Controls which include the LDS (Liquid Detection System). * SL210-MP8 SL210-FA SL212 SL212-DOR Conventional SmartLift with Trio TM Superstructure and FLIP UP ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Conventional SmartLift with Trio TM Superstructure and RUBBER ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Conventional SmartLift with Trio TM Superstructure and TRUCK ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Comes with (4) T /2 tall and (4) T tall extensions. Conventional SmartLift with Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi- Position Locks, Volt, Single Phase Power Unit. Comes with Truck Adapters and (4) FJ /2 tall and (4) FJ tall extensions. * 81 1/2" (2045 mm) 84 1/4" (2140 mm) Combines SL212 with DOR10 Runways (158 or 182 wheelbase) Which Include: 2 Runways, 2 Auto Ramp Chocks and Yoke Bolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating. 76 7/8" SL210-RA $12,180 (1953 mm) SL210-TA Conventional / SmartLift 8,000 lb. capacity SmartLift with moveable pads, std controls. Includes (4) FJ2428E 3 and (4) FJ2427E 1-1/2 spacer blocks. 7/1/2011 also includes FJ2487 rubber pad kit. 73 3/8" (1864 mm) 76 7/8" (1953 mm) 8,000 lbs. (3629 kg) $12,180 $12,180 $12,180 $15,209 $18,111 Control Mounting Options Three Phase Power SL210-BU SL212-BU SL210i-FA SL212i SL212- DORi SL210-BUi SL212-BUi Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes: Guide Pistons, Automatic Locking Devices, Rigid-Equalized, Volt, Single Phase Power Unit. Also for use with Drive-On Runways. System Capacity Will Vary When In Use With Non- Rotary Components. SmartLift with Liquid Detection Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi- Position Locks, Volt, Single Phase Power Unit. Comes with Truck Adapters and (4) FJ /2 tall and (4) FJ tall extensions. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes: Guide Pistons, Automatic Locking Devices, Rigid-Equalized, Volt, Single Phase Power Unit. Also for use with Drive-On Runways. System Capacity Will Vary When In Use With Non-Rotary Components. 71 1/2" (1816 mm) 81 1/8" (2061 mm) 84 1/4" (2140 mm) 71 1/2" (1816 mm) Lift comes standard with operating controls located on wall-mount unit. The following options are available. Must Specify When Ordering. T Power Unit Stand For Use With Three Phase One Touch Controls for Mounting One Power Unit and Control Unit. No cost when ordering lift. $9,691 $11,184 8,000 lb. capacity SmartLift with moveable pads, one touch controls and LDS. Includes (4) FJ2428E /8" 8,000 lbs. SL210i-MP8 and (4) FJ2427E 1-1/2 spacer blocks. 7/1/2011 also includes FJ2487 rubber pad kit. $12,685 (1864 mm) (3629 kg) $12,685 SL210i-RA SmartLift with Trio TM Superstructure and RUBBER ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. 76 7/8" Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi- (1953 mm) $12,685 Position Locks, Volt, Single Phase Power Unit. SL210i-TA T SmartLift with Trio TM Superstructure and FLIP UP ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi- Position Locks, Volt, Single Phase Power Unit. SmartLift with Trio TM Superstructure and TRUCK ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Comes with (4) T /2 tall and (4) T tall extensions. Combines SL212i with DOR10 Runways (158 or 182 wheelbase) Which Includes: 2 Runways, 2 Auto Ramp Chocks and Yoke Bolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating. 76 7/8" (1953 mm) $15,724 $18,920 $10,010 $11,699 Power Unit Stand For Use With Conventional and Single Phase One Touch Controls for Mounting One or Two Power Units. No cost when ordering lift. Power Unit Option Optional 4-HP 3kw, 3 Phase, 60 Hz Power Unit For Use With Four-Post Series, SL Series, Two-Post Overhead Design Lifts Only. Must Specify When Ordering. Price In Addition To Standard Unit Price. 208/230 or 460 Volt Must Be Specified. $12,685 $351 NOTE: SmartLifts do not require a 110v drop for the control panel. *NOTE: All SmartLifts Include 50 of 1/4 Airline And Fittings To Be Used For Lock System. **NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position, Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor. T SmartLift Trio Adapter Kits (SL Series and Above) Adapter Extension Kit for SL210 with TRIO Superstructure. Provides additional lifting height when vehicles require additional clearance or use on front or rear to level vehicle on lift. Includes four (4) T (3.5" tall extension) and four (4) T (5" tall extension). $314 T T T Rubber adapter kit for the Trio Superstructure. Includes four (4) FJ6219 adapters. Truck adapter kit for the Trio Superstructure. Includes four (4) T adapters. Flip up adapter kit for the Trio Superstructure. Includes components for four (4) arms. $415 $415 $415 11

12 SL210-FA SmartLifts for Split Shipments Inground Portion Only For Split SL Orders -- Both Conventional and LDS (Liquid Detection System) Versions. Finish kit to complete Conventional SmartLift base unit with New Trio TM Superstructure and FLIP UP ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Finish kit to complete Conventional SmartLift base unit with New Trio TM Superstructure and RUBBER ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. 81 1/2" (2045 mm) 10,000 or (4536 or 5443 kg) Rotary Lift offers the option to split SL orders so that the high pressure inground assembly portion of the lift can be shipped ahead of the rest of the lift. To do this, you should order one high pressure inground kit and one kit from the lists below. There is a $104 list price fee for this option. High pressure inground kits include everything needed to install the inground portion of the lift. Finish kits include the superstructure, power unit and parts box. Control Mounting Options T SL210-MP8 SL210-RA SL212 SL212-DOR SL210-BU SL212-BU SL210i-FA SL210i-RA SL212i SL212-DORi SL210-BUi SL212-BUi High Pressure Inground Assembly Finish Kits** (require High Pressure Inground Assembly) SL210-TA SL210i-MP8 SL210i-TA Finish kit to complete Moveable-pad superstructure for SmartLifts with 8-1/2" piston diameter. Includes (4) FJ2427E 1-1/2" spacer blocks, (4) FJ2428E 3" spacer blocks, mounting hardware. 7/1/2011 also includes FJ2487 rubber pad kit. Finish kit to complete Conventional SmartLift with Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Stack Adapters. 84 1/4" (2140 mm) Finish kit to complete base unit. Combines SL212 with DOR10 Runways (182 wheelbase) Which Include: 2 Runways, 2 Auto Ramp Chocks and Yoke Bolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating. Finish kit to complete Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes: Guide Pistons, Automatic Locking Devices, Rigid-Equalized, Volt, Single Phase Power Unit. Also for use with Drive-On Runways. System Capacity Will Vary When In Use With Non-Rotary Components. Finish kit to complete SmartLift base unit with New Trio TM Superstructure and TRUCK ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Comes with (4) T /2 tall and (4) T tall extensions. Finish kit to complete Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Stack Adapters. Finish kit to complete base unit. Combines SL212i with DOR10 Runways (182 wheelbase) Which Includes: 2 Runways, 2 Auto Ramp Chocks and Yoke Bolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating. Finish kit to complete Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes: Guide Pistons, Automatic Locking Devices, Rigid-Equalized, Volt, Single Phase Power Unit. Also for use with Drive-On Runways. System Capacity Will Vary When In Use With Non-Rotary Components. 73 3/8" (1864 mm) 76 7/8" (1953 mm) 71 1/2" (1816 mm) 81 1/8" (2061 mm) 76 7/8" (1953 mm) 84 1/4" (2140 mm) 71 1/2" (1816 mm) 8,000 lbs. (3629 kg) Lift comes standard with operating controls located on wall-mount unit. The following options are available. Must Specify When Ordering. T T *NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position, Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor. **NOTE: All SmartLifts Finish Kits Include 50 of 1/4 Airline And Fittings To Be Used For Lock System. T T T T T Finish kit to complete Conventional SmartLift base unit with New Trio TM Superstructure and TRUCK ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. Comes with (4) T /2 tall and (4) T tall extensions. Finish kit to complete Moveable-pad superstructure for SmartLifts with 8-1/2" piston diameter. Includes (4) FJ2427E 1-1/2" spacer blocks, (4) FJ2428E 3" spacer blocks, mounting hardware. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. 7/1/2011 also includes FJ2487 rubber pad kit. Finish kit to complete SmartLift base unit with New Trio TM Superstructure and FLIP UP ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi- Position Locks, Volt, Single Phase Power Unit. Finish kit to complete SmartLift base unit with New Trio TM Superstructure and RUBBER ADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. Rigid Equalized. 8 1/2 Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, Volt, Single Phase Power Unit. 76 7/8" (1953 mm) 76 7/8" (1953 mm) Power Unit Stand For Use With Three Phase One Touch Controls for Mounting One Power Unit and Control Unit. No cost when ordering lift. $8,431 $3,853 $3,853 $3,853 $6,882 $9,783 $1,364 $2,857 $4,357 $4,357 $7,397 $10,593 $1,682 $3,372 Power Unit Stand For Use With Conventional and Single Phase One Touch Controls for Mounting One or Two Power Units. No cost when ordering lift. SmartLift Superstructure Kits 73 3/8" (1864 mm) 8,000 lbs. (3629 kg) Moveable-pad superstructure for Smartlifts with 8 1/2" piston diameter. Includes (4) FJ2427E 1-1/2" spacer blocks, (4) FJ2428E 3" spacer blocks, spotting dish, relief valve and mounting hardware. Trio flip-up superstructure kit for 8" plungers (SL series and above). Includes adapters, spotting dish, arm pins and mounting hardware. Trio round adapter superstructure kit for 8" plungers (SL series and above). Includes adapters, spotting dish, arm pins and mounting hardware. Trio truck adapter superstructure kit for 8" plungers (SL series and above). Includes adapters, spotting dish, arm pins and mounting hardware. 3-stage superstructure kit for 6" plungers (SL series and below). Includes adapters, spotting dish, arm pins and mounting hardware. $3,853 $4,357 $4,357 $2,842 $2,842 $2,842 $2,842 $2,790 12

13 T New Future Kit for 500-Series and Later SL212 and SL210 T T T T SmartLift Kits Kit Consisting of : (1) Containment Box (1) Inner Frame Assembly (1) Seal Kit for Containment Box (1) Frame Concrete Anchoring Kit (1) Full Length Cover Plates (1) Flexible Entry Boot Necessary Hardware Completion Kit for 6 plunger for T Relocation Kit. Does not include superstructure. For 6 plunger completion kits. Includes 2 Yokes, 4 Swinging Arms, 4 Swivel Three-Position Frame Contact Adapters, Wheel Dish and Yoke Bolts. SL210, SL210i, SL212 and SL212i completion kit. Contains 8 1/2 plungers, equalizers, guide barrels, cylinders, hoses, lock compoents, and hardware. To make a complete lift this kit also requires a future/relocation kit and a /kit. No power unit included. Gasket and cover kit for 400 SL Models. No charge when ordering with completion kit. Required only when replacing guts or installing completion kit on SL or SL /400. $4,344 $6,776 $1,949 $5,071 $486 T T LDS (Liquid Detection System) Conversion Kit for SL210, SL212 and SL29. Converts conventional control lifts to LDS controls. Single Phase Only. Liquid Removal System (LRS) designed to evacuate fluids from the containment tubes of the Rotary Lift SmartLift Models as well as competitor models. When connected to an air supply that is regulated to 90psi, it will draw approximately 1 gallon of water every 90 seconds or 1 gallon of hydraulic fluid every 16 minutes. $1,547 $794 LRS unit includes a 16 gallon drum, vacuum pump, dolly and suction line. T Hose Kit Pre-cut hose kit including 25' hydraulic hose, air regulator. $294 Mobil 1 SHC1500 (12.5 oz. cartridge) is a versatile multi-purpose extreme pressure, antiwear grease. T IMPORTANT: Only Rotary Approved Grease should be used on SL Products. Other grease products may $18 affect the performance of the product. DOR10-S DOR10-L DOR7-S DOR7-L S Drive-On Runways 2 Runways, 2 Auto Ramp Chocks And Yoke Bolts. Runways and Ramps Have An Oil Resistant, Non-Skid Coating. For SL212BU/ BUi -- No Cutouts Available. Accommodates Current Standard RJ6000 Rolling Bridge (Not Included). 2 Runways, 2 Auto Ramp Chocks And Yoke Bolts. Runways and Ramps Have An Oil Resistant, Non-Skid Coating. For SL210BU/ BUi -- No Cutouts Available. Accommodates Current Standard RJ6000 Rolling Bridge (Not Included). SYSTEM (4536kg) 7,000 lbs. (3175kg) Maximum Wheelbase Range 158" (4013 mm) 182" (4623 mm) 158" (4013 mm) 182" (4623 mm) DOR Drive-Thru Ramp Kit for SmartLift. Includes Spacer. $686 $6,437 $6,437 System Capacities Based On Use With Applicable Rotary Lift. For Use With Lifts Manufactured By Others, Capacity May Vary. Consult Factory For More Information. Convert any DOR to a 4-wheel alignment rack by adding an alignment kit (FA5501-1) option shown on page 14. Drive-On Runway Efficiency / Alignment Package S Package Includes Two (2) RJ6000 Rolling Bridges, FA Bolt-On Alignment Package, (which includes: Four Wheel Alignment Retro Kit in Roll Back Version -- ideal for 3-D Alignment Equipment -- Stainless Steel Radius Gauge, Rear Slip Plate Kit), Four Leveling Legs, and necessary hardware (drilling and tapping required). $11,270 S Same as above but includes two (2) SJ6000 Swing Air Jacks in place of RJ6000. $12,165 Light Kits FA Post and Y-Lift Light Four 48" long light wands with 216 LEDS each. 8 magnetic clips included. Input voltage V AC. $898 FA Post Light Two 32" light wands with 95 LEDS each. Magnetic mounting clips to position where needed. Input voltage V AC. $548 FA5702 Handheld Rechargeable Light Rechargeable LED Inspection Light. Top Spot Light and light wand. 4 hour charging time with Input voltage V AC. $150 13

14 Lift Accessories Frame Engaging Lift Accessories FJ6115BK** EH (Extended Height) Auxiliary Adapters For Use When Raising Certain Vans Or Pick-Ups. Maximum Height 14 3/8" (365 mm). Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary Lift Manufactured Since October Includes (4) FJ696 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114. $398 FJ6212KITYL** Shorter version of FJ6115. Kit includes a set of (4) FJ6212 adapters and 2 piece column or wall mounted adapter rack FJ6114. Adapter height 7 3/8. Capacity 2,500 lbs. (1,134 kg) $356 Extended height auxiliary adapters version of FJ (76 mm) additional rise for a total 17 3/8 (454 mm). FJ6195YL** Includes a set of (2) FJ6196 adapters. Capacity is 2,500 lbs. (1,134 kg) per adapter. $266 FJ6133BK** EH (Extended Height) Required To Lift 1988 Or Newer General Motors GMT400 Pickup Trucks. Maximum Height: 14" (356 mm) Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary Lift Manufactured Since October Includes (4) FJ6101 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114. $423 1/ /2 FJ6137BK** Required For Raising Mini-Vans With Running Boards (i.e. Aerostar, Astro, Caravan, Voyager). Adjustable Range Provides 4 7/8" to 6 3/4" Additional Height. Polymer Contact Surface Protects Undercoated Surfaces. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary Lift Manufactured Since October Includes (4) FJ7858 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114. Polymer Pad Adapter Provides 1/2" Additional Clearance. Fits Any Frame Engaging Rotary Lift Manufactured Since October FJ6138BK** $ Includes (4) FJ697 Adapters, 2 Piece Column or Wall-Mounted Adapter Rack FJ6142. Step Polymer Pad Adapter Provides 1" Additional Clearance. Fits Any Frame Engaging Rotary Lift FJ6190YL** Manufactured Since October Includes (4) FJ6189 Adapters, 2 Piece Column or Wall-Mounted Adapter $257 Rack FJ6142. High Step Polymer Pad Adapter Provides 2 1/2" Additional Clearance. Fits Any Frame Engaging Rotary Lift FJ6139BK** Manufactured Since October Includes (4) FJ698 Adapters, 2 Piece Column or Wall-Mounted Adapter $257 Rack FJ6142. FJ6100BK** Includes (4) FJ696, (4) FJ697 And (4) FJ698 Plus 2 Piece Column or Wall-Mounted Adapter Organizer Rack Part #FJ6108. $780 FJ6104BK** Includes (4) FJ6101, (4) FJ697 And (4) FJ698 Plus 2 Piece Column or Wall-Mounted Adapter Organizer Rack Part #FJ6108. $808 FJ6105BK** Includes (2) FJ696, (2) FJ6101, (4) FJ697, (4) FJ698 Plus 2 Piece Column or Wall-Mounted Adapter Organizer Rack Part #FJ6108. $796 FJ6117BK** Includes (4) FJ7858, (4) FJ697, (4) FJ698 Plus 2 Piece Column Adapter Organizer Rack Part #FJ6108. $820 $462 FJ6197 Set of four (4) FJ6214 rubber adapters. Required for use on 3-stage arms when lifting trucks or other frame vehicles. $407 FJ6225 FJ7880BK Set of four (4) FJ6202 round adapters. For use on 3-stage arms when lifting Uni-body construction vehicles. Adapter Extension Kit for SPO/A10 RA/TA, SPO12TA 3-stage, SL210 3-stage (800 series & below) and SL212 Lift Models (not trio arms). Provides additional lifting height when vehicles require additional clearance or use on front or rear to level vehicle on lift. Includes four (4) FJ (3.5" tall extension), four (4) FJ (5" tall extension) and FJ6127 rack kit with mounting hardware. $407 $308 FJ6200 Set of Four (4) FJ6201 Thread-Up Adapters For SPO12 (-10, 300, 400 and 500 Series). $518 N539 Column Base Plate Cover. Fits SPOA7-200 and above, SPOA9-200 and above, all SPOA10 series lifts. $49 each ** NOTE: Full Size Shim Kit Air/Electric Utility Box Includes Filter/Lubricator/Regulator. Mounts Easily On Any 2-Post Surface Lift Except 84 and 74 FA5911BK Series Lift. Provides Easy Access To Both Air And Electrical Outlets Making The Full Rise Lift A Complete Work Station. $551 FA5910BK Air/Electric Utility Box Same As Above Excluding Filter/Lubricator/Regulator. $346 FA915 Air/Electric Utility Box Includes Filter/Lubricator/Regulator. Mounts Easily On Any 4-Post Surface Lift (except for SM30). Provides Easy Access To Both Air And Electrical Outlets Making The Full Rise Lift A Complete Work Station. $551 FA916KIT Air/Electric Utility Box Same As Above Excluding Filter/Lubricator/Regulator. $343 FA2259 Air/Electric Utility Box Includes Filter/Lubricator/Regulator. Mounts Easily On SM30 Series Lifts. Provides Easy Access To Both Air And Electrical Outlets Making The Full Rise Lift A Complete Work Station. $551 FA2260 Air/Electric Utility Box Same As Above Excluding Filter/Lubricator/Regulator. $357 FA5202 Dual Air/Electric/FRL kit for Inbay Lifts. (Fits 1.6 Inbay only) $930 FA5112 Full Size Shim Kits For 2-Post Light Duty Models Installations With Sloped Floors Requiring Full Size Base Shims, or For Use With Front Post On SMO123. Includes A Variety Of Thicknesses To Allow Shimming Up To 3/4" In Height. NOTE: $237 Shimming In Excess of 1/2" Per Column Requires Different Anchors -- Consult Factory. FJ864BK Power Unit Stand For Low-rise Lifts (Power Unit Not Included). $104 Power Unit Stand For Use With Conventional and 700 Series SmartLifts In Mounting Single Power Unit T110280BK (Power Unit Not Included). See Page 10 When Ordering Lift. $198 All Accessories Shown Above May Be Used With Most Frame Contact Models. Fits any Surface Mounted or Inground, Frame-Engaging Rotary Lift, Manufactured Since October T T SmartLift Trio Adapter Kits (SL Series and Above) Adapter Extension Kit for SL210 with NEW TRIO Superstructure. Provides additional lifting height when vehicles require additional clearance or use on front or rear to level vehicle on lift. Includes four (4) T (3.5" tall extension) and four (4) T (5" tall extension). Rubber adapter kit for the Trio Superstrucure. Includes four (4) FJ6219 adapters. $314 $415 T T Truck adapter kit for the Trio Superstrucure. Includes four (4) T adapters. Flip up adapter kit for the Trio Superstrucure. Includes components for four (4) arms. $415 $415 14

15 FJ2427E FJ2428E Flat Polymer Pad Adapter Adds 1-1/2" Height. Rubber Pad Surface Measures 4-3/4" x 6-5/16. Protects Vehicles With Factory Applied Undercoating. 3,500 lbs. capacity per adapter. S Wheel Alignment Retrofit Kit for SM/SMO series 4-post lifts. Rollback version (ideal for 3-D alignment equipment). Kit consists of bolt-on kit, front turning Stainless Steel Radius Gauge Kit, rear slip plate kit and all necessary hardware (drilling and tapping required). Recommended for use with (2) Rolling Jacks $3,816 for performing 4-Wheel Alignment. FC7117 kit. S Same as S less radius gauges. $2,238 S Same as S with Carbon Steel Radius Gauges. $3,460 FA Wheel Alignment Retrofit Kit for DOR series 2-post lifts. Rollback version (ideal for 3-D alignment equipment). Kit consists of Bolt-on Kit, front turning Stainless Steel Radius Gauge Kit, rear slip plate kit, leveling legs, and all necessary hardware (drilling and tapping required). Recommended for use with (2) Rolling Jacks for performing 4-Wheel Alignment. FC7117 kit. $4,373 FC5396 A Wheel Alignment Conversion Package For SM30 Series Lifts Including: (2) FA5211 (7,500 lbs each) Heavy Duty Stainless Steel Turntables And Guides; (2) FC Rear Leveling Plates; (1) FC5395 Heavy Duty Bolt On Work Step Kit; Recoil Hose; Necessary Hardware And Instructions. (Drilling Required.) FC7117 kit. $6,397 S S FC7117 Kit Filler adapter kit for Rotary alignment racks/bolt-on alignment kits to accommodate three dimensional visual alignment instrumentation systems. Included with purchase of any new Rotary alignment rack or bolt-on kit -- effective Standard color is yellow. $51 FC5974 Radius gauge filler plate kit fits lifts with long recess (17 1/2 opening). $282 FC5102 Radius gauge filler plate kit fits lifts with standard recess (18 5/16 opening). $237 RJ150 SB Lift Accessories Drive-On Lift Accessories RJ6000Y Rolling Jack For SM12, SMO12, SM123, SMO123, Y-Lift. Includes rubber adapter 6,000 lbs. blocks: (2) 1.5 tall FJ2427E and (2) 3 tall FJ2428E. (2722 kg) $3,879 RJ6000Y-R Rolling Jack For SM121, SM/SMO122 and AR/ARO122 Prior To April ,000 lbs. RJ7000Y Rolling Jack For SM/SMO14, AR/ARO14. Includes rubber adapter blocks: (2) 1.5 tall FJ2427E and (2) 3 tall FJ2428E. (3175 kg) $4,109 RJ9000Y Rolling Jack For SM18 Series Lifts. Includes rubber adapter blocks: (2).5 tall $4,678 RJ9000Y-1 SB700071Y, (2) 1.5 tall FJ2427E and (2) 3 tall FJ2428E. 9,000 lbs. Rolling Jack For SM181 Only. (4082 kg) $4,657 RJ9000Y-2 Rolling Jack For SM30 Series Lifts. For Passenger Cars and Light Trucks Only! $5,192 Heavy Duty Rolling Jack For SM30, Series Lifts. Capacity. Air/Oil Operated. Dual Locks Supplied With FD291 Combination Front Straight Axle/ Flip Up Rear Axle Support. Will Accommodate All Adapters Typically Used With FD282 Inground Saddle. Flat Polymer Pad Adapter Adds 3" Height. Rubber Pad Surface Measures 4-3/4" x 6-5/16. Protects Vehicles With Factory Applied Undercoating. 3,500 lbs. capacity per adapter. Extended Height Adapter Kit To Pick Up SUV Straight Axle Type Vehicles. Kit includes (2) SB Adapters. For RJ ,000 lbs. (6804 kg) $10,257 SJ6000 Swing Air Jack For AR/SM Series Lifts. 6,000 lbs. (2722 kg) $4,837 SJ8000 Swing Air Jack For AR/SM Series Lifts. 8,000 lbs. (3629 kg) $5,495 SB700071Y Coming Soon! SB100003YL Bolt-On Alignment Kit converts SM18/SM180 and SM18EL/SM180EL lifts to alignment racks. Kit includes stainless steel radius gauges, slip plates and ramp modifications and necessary mounting hardware. Rolling jacks are sold separately. MAXIMUM WHEELBASE RANGE 194" (4928 mm) 230" (5842 mm) Flat Polymer Pad Adapter Adds 1/2" Height. Rubber Pad Surface Measures 4-3/4" x 6-5/16. Protects Vehicles With Factory Applied Undercoating. 3,500 lbs. capacity per adapter. Extended Height Adapter Kit To Pick Up SUV Straight Axle Type Vehicles. Kit includes (2) 7 Adapters. For RJ9000Y. Extended Height Adapter Kit To Pick Up SUV Straight Axle Type Vehicles. Kit includes (2) SB Adapters. For RJ ,000 lbs. (8165 kg) $5,995 $6,251 $13 Each (2 required) $15 Each (2 required) $23 Each (2 required) $155 $155 $155 FJ6211 Extended height adapters for pad lifts for use when lifting SUVs on pad lifts. Includes (4) FJ truck adapters. $344 (set of 4) SB100018YL Round RA R/J adapter kit. For use with RJ7000Y. $725 SB100010YL Round RA R/J adapter kit. For use with RJ6000Y. $725 SB100134KIT Sliding Adapter Extension Kit (Fits RJ7000Y Rolling Jacks). Easily extend the reach of the rolling jack from 57 1/4" to 68 1/2". Comes with 2 SB300084YL extensions. NOTE: These extensions are rated at 1,700 lbs. capacity and de-rates the lift to 3,400 lbs. capacity when attached. $151 Sliding Adapter Extension Kit (Fits RJ7000Z Rolling Jacks). Easily extend the reach of the rolling jack SB100027YL from 57 1/4" to 68 1/2". Comes with 2 SB300072YL extensions and 2 SB sliding extensions. NOTE: These extensions are rated at 1,700 lbs. capacity and de-rates the lift to 3,400 lbs. capacity $321 when attached. FA5211 7,500 lb. Stainless Steel Alignment Turntable (Single). $1,450 FA5211KIT 7,500 lb. Alignment Turntable Kit (Pair) With Retainer Hardware. $2,831 15

16 S S Lift Accessories Drive-On Lift Accessories Ramp Chock Kit For Drive-Thru Bay Operation For Models SM/SMO14 and SM101. Ramps Have An Oil Resistant, Non-Skid Coating. Includes Two (2) S Ramps (40-1/2 ) and Hinge Pins. $686 Extended Ramp Chock Kit For Models SM/SMO14 and SM101. Ramps Have An Oil Resistant, Non-Skid Coating. 9" Longer Ramp Length Than Standard To Reduce Ramp Up Angle For Passenger Cars With Low Ground Clearance. ($52 Adder Only When Substituted For Standard Length Ramps On New Lift Order.) Includes Two (2) S Ramps (49-7/16 ) and Hinge Pins. $706 S FC5825 FC FC Extended Ramp Chock Kit For Model SM18. Ramps Have An Oil Resistant, Non-Skid Coating. 6 1/2" Longer Ramp Length Than Standard To Reduce Ramp Up Angle For Passenger Cars With Low Ground Clearance. ($52 Adder Only When Substituted For Standard Length Ramps On New Lift Order.) Includes Two (2) S Ramps and Hinge Pins. Ramp Chock Kit For Drive-Thru Bay Operation For Model SM18. Ramps Have An Oil Resistant, Non-Skid Coating. Includes Two (2) FC Ramps and Hinge Pins. Additional Ramp Chocks For Drive-Thru Bay Operation For SM and SM30 Series Lifts. Ramps (40 ) Have An Oil Resistant, Non-Skid Coating. For SM Series Lifts, Order # FC Extended Ramp Chocks For SM Series Lifts. Provides 33" Longer Ramp Length Than Standard To Reduce Ramp Up Angle For Passenger Cars And Motor Homes With Low Ground Clearances. Ramps (72 ) Have An Oil Resistant, Non-Skid Coating. For SM Series Lifts, Order # FC NOTE: Add $678 when ordering with lift in place of standard ramps. $976 $898 $551 Each (2 Required) $891 Each (2 Required) FC663 Rolling Jack Tray For SM/SMO122, SM/SMO123 and SM/SMO14. (Bottle Jacks Are Not Included) 7,000 lbs. (3175 kg) $652 FC613 Rolling Tray For SM30 Series Lifts. (Bottle Jacks Not Included) 15,000 lbs. (6804 kg) $3,399 FC5378 Bolt On Work Steps For All 4-Post Series Lifts. $655 (Pair) FC5967 FC Gallon (114 Liter) Low Profile Rolling Drain Pan With Splash Guard, Drain Valve And Dust Cap. For QL4P, SM/ SMO122, SM/SMO14 and SM18 (fits YA-12 only at 43 setting). $1, Gallon (114 Liter) Low Profile Rolling Drain Pan With Splash Guard, Drain Valve And Dust Cap. For SM30 Series Lifts. $1,283 FC Foot Long Oil Drain Hose With Quick Connect Fitting. $128 Internal Air Line Kit FC Internal Air Line Kit (retrofit) For SM/SMO14 Short, L, EL, SM18, QL12 and Y-Lift. $487 Z Extended rear ramps (add $52 when ordering with lift in place of standard ramps). $819 Z Flush rear ramps (add $52 when ordering with lift in place of standard ramps). $819 Z Standard 54 front ramps (drive-thru). $803 Z Extended 70 15/16 front ramps (drive-thru). $834 Z Flush front ramps (drive-thru). $834 Z Full Size Base Shim Kit (6 1/4" & 6 1/8" = total 2 1/4 ). $380 Z Full Size Base Shim Kit (4 1/2" = total 2 ). $380 Z Stainless steel rear slip plate base kit. $3,833 Z Hose relocate kit. Longer hoses and wires to locate control cabinet in front of lift (rear is standard). $418 Z Spacer tool. $112 FA5157 Carbon steel 12" x 14" x 1-1/2" radius gauge (2 required). $609 (each) S Stainless-steel 12" x 14" x 1-1/2" radius gauge (2 required). $789 (each) Z Y-Lift Radius Gauge Filler Kit (contains two Z filler weldments and hardware). $343 FC Accessories for YA12 and Y12 Internal Air Line Kit (retrofit) For SM/SMO14 Short, L, EL, SM18, QL12 and Y-Lift. $487 RS13 Mobile Lifting Systems Accessories Screw-Type Adjustable Jack Stand 56.1"-82.3" (1425mm mm). 13,000 lbs. (5897 kg) Capacity. $991 M Cart for fore and aft frame lifting kit for storage and moving. $955 M Fore and Aft, frame-engagement lifting kit for use with two MCH13 series columns. Maximum capacity 6,000 lbs. per MCH column. FOR MCH13 S ONLY. $3,005 M VDC led service lamp kit (2 round lamps) for MCH13 series lifts. Operates on column s battery power. $766 M Service Chip for MCH s (required to program MCH s). $48 M Large wheel adapter (per column). Raises vehicle for greater access by lift forks. $143 16

17 Lift Accessories Two-Post / Lift Accessories 1 N823 Door Defender: Allows technicians to easily enter and exit the vehicle without damaging their customer s vehicle. Low profile solid rubber guard designed to fit over the two-post lift carriage. Includes 1 Door Defender, adhesive to attach to the lift and instructions. $115 For a Wash Bay, order the following: Full Shim Kits N326 / N325 N3106 / N3105 FJ7923 FA595 FA7129 FA5191E KIT FJ2439 FJ2440 Tool Holder (Patent Pending) Keeps air guns, torque sticks and other tools within reach. Mounts easily in holes already drilled and tapped in the two-post column. Two-Post / Wash Bay Accessories Stainless Steel Equalizer Cables (2), Stainless Steel Latch Cable and Splash Guard. (Not available in Dual Control Models.) Stainless Steel Equalizer Cables For SPO9/SPOA9 Lifts. Stainless Steel Equalizer Cables For SPO10/SPOA10 Lifts. FC Portable Work Step. 350 lb. capacity. $128 $733 $293 each (2 required) Stainless Steel Latch Cable. $54 Splash Guard To Protect Power Unit Motor Assembly. $71 Power Unit Bracket Extension. $46 Movable Pad and VersaLift Accessories Crossbeam Kit for Movable Pad Lifts. Allows vehicles of any width to be safely lifted. Kit comes with (2) FA5306 Aluminum Crossbeams, (4) FJ2427E 1 1/2" and (4) FJ2428E 3" Rubber Pad Adapters and (4) FJ6211 7" Extended Height Adpaters. Flat Polymer Pad Adapter Kit Adds 1-1/2" Height. Polymer Pad Surface Measures 4-3/4" x 6-5/16. Protects Vehicles With Factory Applied Undercoating. (Kit Includes (4) FJ2427E Adapters.) 3,000 lbs. capacity per adapter. Flat Polymer Pad Adapter Kit Adds 3" Height. Polymer Pad Surface Measures 4-3/4" x 6-5/16. Includes (4) FJ2428E spacer blocks. Wheel Service Accessories Full Size 1/4 Shim Kits For Installations With Sloped Flooring Requiring Full Size Base Shims. Allows Shimming Up FC5393BK To 2" Height On One End of Lift. For SM/SMO123, AR/ARO123, QL Models, SM18 and SM30 Lifts. $854 Full Size 1/4 Shim Kits For Installations With Sloped Flooring Requiring Full Size Base Shims. Allows Shimming From 2" FC5414 $429 To 4" Height On Rear End of Lift. For SM/SMO123, AR/ARO123, QL Models, SM18 and SM30 Lifts. $89 $293 each (2 required) S Full Size Shim Kit For Front Of SMO14/ARO14 Open Front Lifts. Contains Two 1/4 Shims And Four 1/16 Shims. $237 FA5310 Drive-On Shim Kits $2,018 $59 per kit $88 per kit TT1001 FA5155 S Stainless Steel Turning Radius Gauge Kit. Includes (2) FA5153 S/S radius gauges; and (4) Retaining Bars -- Part # FA (3,000 lbs. (1360 kg) capacity) Standard Turning Radius Gauge Kit. Includes (2) Standard Turning Radius Gauges -- Part #FA5157; and (4) Retaining Bars -- Part #FA (4,500 lbs. (2041 kg) capacity) Stainless Steel Turning Radius Gauge (Two Required Per Lift). No Pointer. 4,500 lbs. (2,041kg) capacity. $1,867 $1,302 $789 each (2 required) FC5268 Four Wheel Steer Slip Plate Kit (retrofit) for SM123 Series and below (only does 2 sides). $1,038 Stainless Steel Shield Kit NEW! Three Phase Power S S FC7118 S MW-200 MW-500 Rear stainless steel shield kit for AR/ARO14. $1,471 Front stainless steel shield kit for AR/ARO14. $1,321 Rear stainless steel shield kit for AR/ARO12. $1,148 Front stainless steel shield kit for AR/ARO12. $1, lbs. capacity Air operated tire and wheel lift. Offers maximum maneuverability and adjustable lifting and lowering speeds. Provides technicians with responsive and easy positioning of the tire and wheel, easy alignment of the wheel and $2,030 hub and a quick transfer to the wheel balancer. Includes air hose and auxiliary air tool connection. 500 lbs. capacity Air operated tire and wheel lift. Offers maximum maneuverability and adjustable lifting and lowering speeds. Provides technicians with responsive and easy positioning of the tire and wheel, easy alignment of the wheel and hub and a quick transfer to the wheel balancer. Includes air hose and auxiliary air tool connection. Electrical / Power Unit / Overhead Switch Options Optional 4-HP 3kw, 3 Phase, 60 Hz Power Unit For Use With Four-Post Series, SL Series, Two-Post Overhead Design Lifts Only. Must Specify When Ordering. Price In Addition To Standard Unit Price. 208/230 or 460 Volt Must Be Specified. $3,356 $351 FA7118 FA7385 Overhead Cutoff Switch Assembly Mounts Easily On Ceiling Or Overhead Beams Where Limited Ceiling Height Or Excess Vehicle Height Is A Problem. Single Phase Electrical Required. Same as FA7118 but for Three Phase. $376 Special Paint Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions And Order Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions And Cancellation Penalties. Some colors may not be available. Consult Factory For Pricing. $308 17

18 Accessory Options 18