B&G Series e-60 Cast Iron Circulating Pumps
|
|
- Jasmin Webster
- 5 years ago
- Views:
Transcription
1 Toll Free: Order Online: Fax: B&G Series e-60 Cast Iron Circulating s Please visit StateSupply.com to view pump related detailed capacity curves. Upgraded in 2016 New Style HP O. D. Diameter Pre-2016 ID 1-Phase E-60 I.D. Series e-60 Cast Iron s for HVAC Heating & Cooling Maximum Working Pressure: 175 psig Maximum Working Temperature: 250 F. New Unitized Seals perform better and last longer! New Bearing Assemblies made for better performance! These new series e-60 pumps replaced the standard series 60 pumps in These new pumps can use same repair parts as the previous series 60 version, although enhanced seal kits & bearing assemblies are standard on the new e-60 pumps. The e-60 pumps are maintenance free, unlike the old version 60 pumps (made up until 1999) which required periodic oiling of the motor and bearing assembly. The e-60 cast iron body pumps are generally used for circulating water for space heating or cooling requirements. Select from pumps with either Single-Phase (115/230 volt) or Three-Phase ( /460 volt) open drip-proof motors running at 1750 rpm. Single Phase 115/230V Order Pre-2016 ID 3-Phase E-60 I.D. Three Phase /460V Order e x 1 x 5¼ 1/ EF011LF BH1024L EF034LF BH1024M e x 1 x 5¼ 1/ EF142LF BH1024R EF035LF BH1024S e x 1 x 5¼ 1/ EF012LF BH1024W EF036LF BH1024X e-604 1¼ x 1¼ x 5¼ 1/ EF016LF BH EF040LF BH1025B e-605 1¼ x 1¼ x 5¼ 1/ EF017LF BH1025C EF041LF BH1025D e-606 1¼ x 1¼ x 5¼ 1/ EF004LF BH1025G EF042LF BH1025H e-607 1½ x 1½ x 5¼ 1/ EF021LF BH1025L EF046LF BH1025M e-608 1½ x 1½ x 5¼ 1/ EF022LF BH1026B EF047LF BH1027B e-609 1½ x 1½ x 5¼ 3/ EF005LF BH1027D EF048LF BH1027E e x 2 x 5¼ 1/ EF026LF BH1027J EF052LF BH1027K e x 2 x 5¼ 3/ EF027LF BH EF053LF BH1029 e x 2 x 5¼ EF006LF BH1057A EF054LF BH1057B e-621 1½ x 1½ x 6¼ 1/ EF064LF BH EF065LF BH1092A e-613 1½ x 1½ x 6¼ 3/ EF031LF BH EF058LF BH1061 e-614 1½ x 1½ x 6¼ EF007LF BH1061B EF059LF BH1061C e x 2 x 6¼ 3/ EF032LF BH1061F EF060LF BH1061G e x 2 x 6¼ EF008LF BH1061K EF061LF BH1061L e-622 1½ x 1½ x 7 3/ EF066LF BH EF068LF BH1093A e-623 1½ x 1½ x EF067LF BH EF069LF BH1063 e-617 1½ x 1½ x 7 1½ EF033LF BH1061M EF062LF BH1061N e-618 1½ x 1½ x EF009LF BH1089 e x 2 x EF070LF BH EF072LF BH1095A e x 2 x 7 1½ EF071LF BH EF073LF BH1096A e x 2 x EF063LF BH1090 e x 2 x EF010LF BH1091 e x 3 x 5¼ 3/ EF143LF BH EF144LF BH1097A e x 3 x 5¼ 1½ EF147LF BH EF148LF BH1098A 18
2 Toll Free: Order Online: Fax: B&G Series Be-60 Bronze Body Circulating s Bronze for Potable, Domestic Water Upgraded & released to the market in 2016 The new bronze body Bell & Gossett Series Be-60 pumps (released in 2016) are specially-built to pump potable water to restrooms, kitchens, etc. They are maintenance free: The bearing assembly and motor are permanently lubricated. They have higher operating efficiencies while delivering a quiet & smooth performance. Maximum Working Pressure: 175 psig. Maximum Working Temperature: 250 F. In 1999 these pumps replaced the old Series B60 pumps. The repair parts for the old, obsolete Series B60 pump (made before 1999) models, along with these new Be-60 pumps, can be found on the pages that follow. Complete Bronze Body Series Be-60 s for Potable Domestic Water These new series Be-60 (model upgraded in 2016) bronze body pumps are used for circulating heated or chilled water to restrooms, kitchens, showers, laundries, etc. Select from pumps with either Single-Phase (115/230 volt) or Three-Phase ( /460 volt) open dripproof motors running at 1750 rpm. Local plumbing codes generally insist on bronze body pumps when circulating potable domestic water. Note: Even though these pumps were upgraded in 2016, you may continue to use the same repair parts and replacement components for the standard 60 series pumps. However, these new Be-60 pumps come with enhanced bearing assemblies and mechanical seal kits. B&G HP O.D. Diameter Pre-2016 ID 1-Phase e-60 I.D. Single Phase 115/230V Order Pre-2016 ID 3-Phase e-60 I.D. Three Phase /460V Order Be x 1 x 5¼ 1/ EF013LF BH1024J EF037LF BH1024K Be x 1 x 5¼ 1/ EF014LF BH1024N EF038LF BH1024P Be x 1 x 5¼ 1/ EF015LF BH1024T EF039LF BH1024U Be-604 1¼ x 1¼ x 5¼ 1/ EF018LF BH1026A EF043LF BH1025T Be-605 1¼ x 1¼ x 5¼ 1/ EF019LF BH1025E EF044LF BH1025F Be-606 1¼ x 1¼ x 5¼ 1/ EF020LF BH1025J EF045LF BH1025K Be-607 1½ x 1½ x 5¼ 1/ EF023LF BH1025N EF049LF BH1025P Be-608 1½ x 1½ x 5¼ 1/ EF024LF BH1027A EF050LF BH1027C Be-609 1½ x 1½ x 5¼ 3/ EF025LF BH1027F EF051LF BH1027G Be x 2 x 5¼ 1/ EF028LF BH1027L EF055LF BH1027M Be x 2 x 5¼ 3/ EF029LF BH EF056LF BH1057 Be x 2 x 5¼ EF030LF BH1057C EF057LF BH1057D Be-614 1½ x 1½ x 6¼ EF076LF BH1060D EF077LF BH1060E Be x 2 x 6¼ 3/ EF078LF BH1061H EF079LF BH1061J Be-621 1½ x 1½ x 6¼ 1/ EF074LF BH1092B EF075LF BH1092C Be x 3 x 5¼ 3/ EF145LF BH1097B EF146LF BH1097C Be x 3 x 5¼ 1½ EF149LF BH1098B EF150LF BH1098C 19
3 Toll Free: Order Online: Fax: Bell & Gossett 60 s Dimension Guide Series 60, 1 to 1½ Resilient motor mounts on motors through 1 HP. Series 60, s 1 to 1½ F G K L M N P R S T For 1 x 5¼ and 1¼ x 1¼ x 5¼ 6-7/16 3-7/16 3-5/8 1-3/8 2-1/2 7-1/2 3/ For 1½ x 1½ x 5¼ 6-9/16 3-5/8 3-3/4 1-3/8 2-3/4 7-7/8 3/ /2 11-1/2 For 1½ x 1½ x 6¼ 6-11/16 3-3/8 4-1/ /16 8-9/16 3/4 6-1/ /2 For 1½ x 1½ x 7 9-3/8 3-1/4 4-5/ /8 9-1/2 3/4 6-1/ /2 HP Dimensions (1750 rpm), inches Approximate For sizes 1 to 1½ HP Phase A B C D E H 1/4 1/3 1/2 3/4 1 1½ No Mounts 2 No Mounts /8 2-1/4 7-7/8 4-3/ / /8 7-7/8 4-3/ / /8 2-1/4 7-7/8 4-3/ / /8 7-7/8 4-3/ / /8 2-1/4 7-7/8 4-3/ / /8 7-7/8 4-3/ / /8 2-1/4 7-7/8 4-3/ /8 7-7/8 4-3/ /8 2-1/4 7-7/8 4-3/4 9-3/4 21-7/ /8 7-7/8 4-3/4 9-3/4 21-5/ /4 2-1/4 6-1/2 3-1/4 10-3/4 21-1/ /2 6-1/2 3-1/4 10-3/4 21-1/ /2 6-1/2 3-1/4 10-3/4 21-1/2 Series 60, s 2 and 3 F G K L M N P R S T For 2 x 2 x 5¼ 6-11/16 3-3/4 3-3/4 1-3/8 2-7/8 8 13/ /2 11-1/2 For 2 x 2 x 6¼ 6-15/16 3-1/2 4-3/ /8 13/16 6-1/ /2 For 2 x 2 x 7 9-3/8 3-1/2 4-3/ /8 9-7/8 13/16 6-1/2 7-1/2 14 For 3 x 3 x 5¼ 6-11/16 3-1/2 3-3/4 1-3/8 2-7/ /16 5-3/4 6-1/4 12 Series 60 2 and 3 Resilient motor mounts NOT included on 1½ to 3 HP motors HP Dimensions (1750 rpm), inches Approximate For sizes 2 and 3 HP Phase A B C D E H 1/3 1/2 3/4 1 1½ No Mounts 2 No Mounts 3 No Mounts /8 2-1/4 7-7/8 4-3/ / /8 7-7/8 4-3/ / /8 2-1/4 7-7/8 4-3/ / /8 7-7/8 4-3/ / /8 2-1/4 7-7/8 4-3/ /8 7-7/8 4-3/ /8 2-1/4 7-7/8 4-3/ / /8 7-7/8 4-3/ / /4 2-1/4 6-1/2 3-1/4 10-3/4 21-3/ /2 6-1/2 3-1/4 10-3/4 21-3/ /2 6-1/2 3-1/ / /2 6-1/2 3-1/4 11-3/8 22-1/4 20
4 Toll Free: Order Online: Fax: Repair Parts for Current 60 & e-60 Bell & Gossett s Current B&G Series 60 pumps were first manufactured in Diameter (5¼ ) The e-60 series pumps were introduced to the market in You may use the repair parts designated for the current series 60 pumps when you repair the new e-60 series pumps Custom I.D. Plates Stock I.D. Plates I.D. Plates for the current 60 series pumps I.D. Plates for the new e-60 series pumps * MOTOR MOUNTS The New Series 60 Bearing Assemblies do NOT have an oil well cover on top. * s from 1.5 HP to 3HP do not have resilient motor mounts. Bell Gossett (Sleeve Bearing Design) Or (¹Ball Bearing Design) Bell Gossett (Sleeve Bearing Design) Or (¹Ball Bearing Design) ¹Bearing Assembly Note: The old style Bearing Assemblies ( and ) can be used on the new series 60 pumps. In the opinion of many, the ball bearing design is more robust and longer lasting than the sleeve bearing design. Ball bearing design bearing assemblies require annual oiling. 21
5 Toll Free: Order Online: Fax: Repair Parts for Current 60 & e-60 Bell & Gossett s REPAIR PARTS ORDERING TABLE a) The bronze-fitted Bearing Assembly fits both the cast iron (red) and bronze body pumps. They are pre-assembled with the seal kit (#11) attached and the volute gasket (#2) included. b) The pump flanges are sold separately. Order 2 to replace your set of old pump flanges. c) Includes bolts and nuts (set of 4 or 8) to fasten both pump flanges to the pump: Not included with pump flanges. ¹ Choose from the standard bearing assembly that works on both the model 60 and e-60, or select the enhanced bearing assembly with new unitized seal that has a longer operational life and will also work on both models, but is made especially for the new model e-60. ² Choose the standard mechanical seal kit, or the enhanced (longer-life) mechanical seal kit. Both work on either 60 or e-60 models. a) Item #4 Item #6 Item #6 Item # 5 Item #11 Item #2 B&G HP ¹Bearing, 1 PH, 3 PH Mounts ²Mechanical Volute Diam. Assembly 115/230V /460 Set of Two Coupler Seal Kit Gasket for 60 & e-60 for 60 & e x 5¼ ¼ 4.38 BG1346E BG1346F x 5¼ 1/ BG1346G BG1346H x 5¼ ½ 5.25 BG1346J BG1346K 604 1¼ x 5¼ ¼ 4.38 BG1346E BG1346F 605 1¼ x 5¼ 1/ BG1346G BG1346H ¼ x 5¼ ½ 5.25 BG1361M BG1346J BG1346K BG1160 BG1240 BG ½ x 5¼ 1/ Standard for BG1346G BG1346H Standard for 608 1½ x 5¼ ½ BG1346J BG1346K ½ x 5¼ ¾ 5.25 BG1346L BG1346M BG x 5¼ ½ BG1346J BG1346K BG1368C x 5¼ ¾ 4.75 BG1368 BG1346L BG1346M Enhanced for x 5¼ Enhanced for BG1346N BG1346P BG1336 BG1361J e60 e ½ x 6¼ ½ 4.88 BG1346J BG1346K BG1160 BG ½ x 6¼ ¾ 5.75 BG1346L BG1346M 614 1½ x 6¼ BG1346N BG1346P BG1336 BG1361J x 6¼ ¾ 5.62 BG1346L BG1346M BG1160 BG x 6¼ BG1346N BG1346P BG1336 BG1361J 617 1½ x 7 1½ 6.50 BG1346S BG1346T 618 1½ x BG BG1346U x BG1361N BG x Standard for BG1346R BG1361L Standard for 622 1½ x 7 ¾ BG1346L BG1346M BG1160 BG BG ½ x BG1346N BG1346P BG1336 BG1361K BG1368E x BG1368A Enhanced for x 7 1½ 6.12 Enhanced for BG1346S BG1346T BG1362 e60 e x 5¼ ¾ 4.38 BG1346L BG1346M BG1160 BG1361J x 5¼ 1½ 5.25 BG1346S BG1346T BG1361K Continued: Repair Parts for 60 and e-60 pumps B&G HP Diam. Item #15 Adpt. Ring Gasket b) Red b) Bronze c) Bolt Set Set of 4 or 8 Gaskets Set of Two Item # x 5¼ ¼ 4.38 BG x 5¼ 1/ BG1520N BG1520M BG x 5¼ ½ 5.25 BG1559E BG1561H BG ¼ x 5¼ ¼ 4.38 BG ¼ x 5¼ 1/ BG1519F BG1520P BG ¼ x 5¼ ½ 5.25 BG1559E None 607 1½ x 5¼ 1/ BG ½ x 5¼ ½ 4.94 BG1520R BG1537 BG1561J BG1190 BG ½ x 5¼ ¾ 5.25 BG1559B x 5¼ ½ 4.12 BG x 5¼ ¾ 4.75 BG1511 BG1511A BG1561L BG1195 BG x 5¼ BG ½ x 6¼ ¾ 5.75 BG ½ x 6¼ BG1520R BG1537 BG1561J BG1190 BG1559H 621 1½ x 6¼ ½ 4.88 BG1560P BG1560S x 6¼ ¾ 5.62 BG1720 BG1511 BG1511A BG1561L BG x 6¼ BG1559G 617 1½ x 7 1½ 6.50 BG1557 BG1520R BG1537 BG1561J BG ½ x 7 1½ 7.00 BG x BG1700 BG1511 BG1511A BG1561L BG x BG ½ x 7 ¾ 5.50 BG1560T None BG1520R BG1537 BG1561J BG ½ x BG1560U x BG1560V BG1511 BG1511A BG1561L BG x 7 1½ 6.12 BG1560Q x 5¼ ¾ 4.38 P74000 BG1368M BG1511C BG1368K BG x 5¼ 1½ 5.25 BG1368H BG1368N Shaft Key Item #9 Nut Item #3 Washer BG1527 BG1542 BG1521B BG1547 BG1539A BG1539F BG1527 BG1542 BG1521B 22
6 Toll Free: Order Online: Fax: Repair Parts for Old Series 60 Bell & Gossett s Old style B&G Series 60 pumps were last manufactured in early The Identification Plate shows the complete pump information. Please provide all this information to ensure the correct replacement components. The Date Code: A indicates January (the 1st letter & 1st month); 19 indicates the year 1991 (the digits are inverted). Old Style 60 Made until 1999 Old B&G Series 60 Repair Parts Diagram The Old 60 pumps have an oil well cover on top of the bearing assembly. New 60 pump bearing brackets do not. Bearing Assembly Bearing Assembly or The old Bell & Gossett Series 60 pumps were replaced by the new maintenance free sleeve bearing design series 60 pumps (found on the preceding pages) in early An easy way to identify an Old style 60 pump: Look at the bearing assembly to see if you have an OIL WELL COVER. See adjoining diagram. The new series 60 pumps are maintenancefree: The new series 60 bearing assemblies (bearing bracket) do not have an oil well cover because they do not need to be oiled. However, the larger bearing assembly (185333) does have a coupler cover. 23
7 B&G Toll Free: Order Online: Fax: Repair Parts for Old Series 60 Bell & Gossett s REPAIR PARTS ORDERING TABLE See previous page for Repair Parts Diagram NOTES: a) The Bearing Assembly fits both the cast iron (red) and bronze body pumps. They are pre-assembled with the seal kit (#11) attached. The volute gasket (#2), and a tube of oil are included. b) The pump flanges are sold separately. Order 2 each to replace your set of current pump flanges. c) Includes the bolts and nuts (set of 2 or 4) to fasten one pump flange to your piping. d) Replace the Mounts (at each end of the motor) every time you replace a coupler. e) Specify impeller size if different from the size shown in the chart below. HP Diam. Item #4 a) Bearing Assembly Item #6, 1 PH 115/230V Item #6, 3 PH / AA 1/ BG1340 BG1338C /4 AA 1/ BG1339 BG1339A /2 AA 1/ BG1100 BG AA 3/ BG1110 BG /2 A 1/ BG1100 BG /2 A 3/4 6.5 BG1110 BG1115 d) Mounts Set of Two BG1160 Item # 5 Coupler /2 A 1 7 BG1116 BG1342 BG1336 BG1245 ⁴ A 3/ BG1110 BG1115 BG1160 BG1375 Assuming the motor is working fine, the best way to repair your pump is to replace the entire bearing assembly. Sometimes known as the pump housing, all the new components that actually do the pumping (except for the impeller) are preassembled and ready for easy installation. s are not included with the bearing assembly. Order impellers separately. They are not provided with the bearing assembly. Item #11 Seal Kit Item #2 Body Gasket Item #19 Oil Wick Item #18 Oil Well Cover BG1240 BG1300 BG1555 BG1200 BG1625 BG A BG1116 BG1342 BG1245 BG T 2 A 1½ 6.75 BG1344 BG S 1 AA 1/ * BG /4 AA 1/ BG1340 BG1338C /2 AA 1/ BG1100 BG1105 BG AA 3/ BG1110 BG1115 BG /2 A 1/ BG1100 BG /2 A 3/ BG1110 BG /2 A 1 7 BG1116 BG1342 ⁴ A 1 6 BG1116 BG A 1½ 6.5 BG1344A BG A 2 7 BG1346 BG1160 BG1336 BG1380 BG1560 BG1522 BG1553 BG1240 BG1300 BG1555 BG1200 BG1625 BG1375 BG1245 BG /2 F BG1346C BG1564A BG1380 BG1560 BG1522 * 115 volt only motor. For 230 volt motor use ⁴Use the bronze bearing assembly if a Bronze body pump is used for in public food service applications. Continued: Repair Parts for the Old Series 60 s... B&G HP Diam. b) Red b) Bronze c) Bolt Set Gaskets (Set of 2) Bearing Assemblies All are bronze fitted Item #8 e) Item #9 Nut Item #3 Washer Item #16 Shaft Item #14 Front Bearing BG1553 Item #15 Bearing Gasket AA 1/ BG1520N BG1520M BG1364 BG /4 AA 1/ BG1519F BG1520P BG1561H BG1542 BG1552 BG1440 BG1564 BG /2 AA 1/ BG1520R BG1537 BG1190 BG AA 3/ BG1511 BG1511A BG1561K BG1195 BG /2 A 1/ BG1552H /2 A 3/4 6.5 BG1520R BG1537 BG1561J BG1190 BG1552D /2 A 1 7 BG1543 BG1539E BG1235 BG A 3/ BG1552K A BG1511 BG1511A BG1561K BG1195 BG1552J 60-10T 2 A 1½ 6.75 BG1552E 60-10S 1 AA 1/ BG1520N BG1520M BG1364 BG1561H BG /4 AA 1/ BG1519F BG1520P BG1365 BG1542 BG1552 BG1440 BG1564 BG /2 AA 1/ BG1520R BG1537 BG1561J BG1190 BG AA 3/ BG1511 BG1511A BG1561K BG1195 BG /2 A 1/ BG1552H /2 A 3/ BG1520R BG1537 BG1561J BG1190 BG1552G /2 A 1 7 BG1552D A 1 6 BG1552K BG1543 BG1539E BG1235 BG A 1½ 6.5 BG1511 BG1511A BG1561K BG1195 BG1552J A 2 7 BG1552E /2 F BG1558D 24
8 Toll Free: Order Online: Fax: Bell & Gossett Series 60 s with ECM s Reduce your motor operating costs by 50% or more with ECM motors. Control Permanent Magnet Rotor Sample of small ECM motor ECM motors are much more energy efficient than conventional motors: energy costs can be reduced by 50% or more when compared to standard motors. The electronically commutated motor (ECM) uses an AC power supply, and inverts it to DC power by a microprocessor within the motor control. The DC power is then applied to the permanent magnet rotor within the brushless DC motor - It has no windings in the motor. The ECM motor s control allows for the ongoing adjustment of the motor s speed: It varies the RPM of the motor in response to changing system conditions. The ECM motor also adjusts the motor s torque, providing a gradual build-up in speed when system conditions allow. How they work: Let s compare an ECM motor s operation to the cruise control function on your car. When you are using cruise control, you program how fast you want the car to go and set that speed (MPH). The RPM of the engine runs at a certain level to maintain that speed. Now, you car starts to go up a hill. The cruise control senses a change in torque, so it needs to rev up the engine so it can maintain your programmed speed. Likewise, when you go down a hill, there is less torque on the engine so the RPM speed is reduced and, again, you are maintaining the programmed speed. The same thing is occurring with an ECM motor. It works on a relationship between RPM, torque, and CFM or flow (instead of MPH). Instead of a control on the steering column, there is a board on the motor control that is set up to perform the requirements associated with the related Bell & Gossett 60 ECM pump model. Control pump performance directly or from a remote location. You can make adjustments to the pump s performance or let her rip according to the pre-programmed parameters. The Control is the brains of the device, where AC VAC 60 cycle (Hertz/frequency) power is connected. The control then converts AC power to DC power to operate the internal electronics, thus the name DC motor. The microprocessor in the motor control is programmed to then convert DC power (by means of electronic controls) to a three phase (3Ø) signal to drive the motor, thus the name three phase motor. It also has the added ability to control the frequency (which controls the speed in revolutions per minute) and the amount of torque (current/power) it delivers to the motor. Sample of a Control for ECM The is essentially a three phase motor with a permanent magnet rotor. The permanent magnet rotor contributes to the electrical efficiency of the ECM and also to its sensor-less ability to control the motor s rpm and commutation (when to alternate the cycle). Typical DC motors require brushes to provide the commutation function, not so with the ECM motor design. Bell & Gossett Series 60 s with ECM s Variable speed motors with motor mounted interface are available in ½ and 1 HP for single phase power supply. ECM motors adjust motor speed to match flow and head requirements, thus substantially reducing power consumption. The user interface allows for manual adjustment or remote control via 10 VDC input/output. Ordering information on next page 25
9 Toll Free: Order Online: Fax: Bell & Gossett Series 60 s with ECM s Available in Cast Iron or Bronze Reduce energy use by up to 50% or more! ECM motors respond to system changes, allowing RPM to fluctuate to meet the immediate operational needs. These smart motors are directed by the control module on top of motor. Features: Bronze fitted construction Wide range of capacity within a single pump model Adjust the motor control parameters as needs change Electronically commutated motor, permanent magnet rotor Internal, self-flushing mechanical seal Rating from 20 to 225 F;175 psi max working pressure Energy savings of 50% or more! Repair Parts: Except for the ECM motor and control, all repair parts are the same as those used for the standard series 60 pumps. Construction: Select from Cast Iron (standard for heating) or Bronze (used for potable water) construction pumps. P Dimension Guide A T Currently available only with One-Phase motors: 115V or 230V. s with three-phase motors will be available sometime in E K M P H N Cast Iron Bronze, NPT Min. Max. RPM RPM HP Dimensions, inches Includes control module Hz Volts Order A E H K M N P T Wgt. lbs. Cast Iron Order e650s Be650S 1 11/ BH1098E 115 BG2955 e651s Be651S 1¼ 3/ BH1098H.50 20⅝ 3⅝ 2½ 7½ e652s Be652S 1 11/ BH1098K BG2955A e653s Be653S 1¼ /60 8¼ 3 3/ BH1098M e654s Be654S 1½ 230 e655s Be655S BG2955C 3¾ 13/16 11½ 65 BH1098P 20⅝ 2⅞ 8 e656s Be656S 3 1-1/ BH1098R 21 2¾ 7⅞ 3/4 11½ 59 BH1098N Bronze Order BH1099 BH1099A BH1099C BH1099E BH1099H BH1099K BH1099M 26
Bell & Gossett Series 1510 Centrifugal Pumps
Learn How To Repair On-Line: the www.statesupply.com Bell Gossett 50 Series Email: s Sales@StateSupply.com Bell & Gossett Series 50 Centrifugal s Great Pricing on 50 s! s in Two-Days or Less! 50 Dimension
More informationGet-A-Quote on Your Bell & Gossett e-1510 Pump
Get-A-Quote on Your Bell & Gossett e- e- Identification Guide Need a New e- Series? Need it ped Fast? In Bell & Gossett upgraded the old pump to the new e pump. Changes include the re-design of the volute
More informationCURVES B-194. Series e-60 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES
CURVES B-194 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES TABLE OF CONTENTS Useful Pump Formulas..................................................................... 2 Stock Pump
More informationSeries e-60. In-Line Mounted Centrifugal Pumps Maintenance Free Replacement Parts PARTS LIST CP-107-PL
Series e-60 In-Line Mounted Centrifugal Pumps Maintenance Free Replacement Parts PARTS LIST CP-107-PL Index How to Use This Parts List... 3 Exploded View Series e-60 Maintenance Free Pump... 4 Standard
More informationBell & Gossett Parts List CP-302F-PL. Replacement Parts for Series 1522 Uni-Built Centrifugal Pumps
Bell & Gossett Parts List CP-302F-PL Replacement Parts for Series 1522 Uni-Built Centrifugal Pumps SERIES 1522 2 3 4 5 Standard Size Designations ITEM NO. 6 6 8 5 PUMP PART NUMBER BUILT-TO-ORDER EQUIVALENT
More informationBell & Gossett Parts List CP-106F-PL. Replacement Parts for. Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps
Bell & Gossett Parts List CP-106F-PL Replacement Parts for Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps SERIES 60 How to use this PARTS LIST The pump nameplate identifies the pump by model
More informationTaco CI Series End Suction, Base Mounted Pumps
Taco CI Series End Suction, Base Mounted Pumps Taco CI Series Pumps are similar to the Bell & Gossett 1531 series of base mounted pumps. Used in commercial, industrial and institutional applications where
More informationTransient Voltage Suppressor SMCJ5.0 - SMCJ188CA
Mechanical Data: Features: Glass passivated junction Low incremental surge resistance, excellent clamping capability 1,500W peak pulse power capability with a 10/1,000μs waveform, repetition rate (duty
More informationThe ECM Textbook.
Table of Contents - Overview of ECM Technology - Indoor Blower Motors o Variable Speed ECM o Constant Torque ECM The ECM Textbook www.thedealertoolbox.com About the Company When Regal Beloit acquired General
More information2
Brushless DC motors 2 3 VFD VS ECM(PM Motors) Both take AC and convert to DC VFD is generally 3Ø ECM 1Ø in 3Ø out VFD & ECM Both have Rectifiers VFD & ECM both have transistor outputs VFD Out put
More informationRAPID ALERT SYSTEM FOR FOOD AND FEED
RAPID ALERT SYSTEM FOR FOOD AND FEED The legal basis of the system is Regulation (EC) No 178/2002 laying down the general principles and requirements of food law, establishing the European Food Safety
More informationThe ECM Textbook ECM. Table of Contents. - Overview of ECM Technology. - Indoor Blower Motors o Variable Speed ECM o Constant Torque ECM
The ECM Textbook Table of Contents Overview of ECM Technology Indoor Blower Motors o Variable Speed ECM o Constant Torque ECM ECM PSC 2007 GE ECM by REGALBELOIT ECM Textbook Rev 1.4 This material has been
More informationSECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS
SECTION 15160 - PUMPS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
More informationSeries 1510 Centrifugal Pumps
Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationCustomer Maintenance Parts List
Customer Maintenance Parts List Model DR Model DR Hybrid Recorder DR0 Model DR Model DR Yokogawa Electric Corporation Copyright Jun. (YK).th Edition:Apr.(YK) CMPL DR00E () () BJA B00CW B00CR Chart Cassette
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationModel MASA Installation Manual, Form I-COND
Form P-COND Replacement Parts IMPORTANT 1. Always include complete heater model and serial number so that any specification change can be considered for parts replacement. It can save time and expense.
More informationKS / SKS Vertical Split Coupled Inline Pumps
Water Circulation Pumps & Circulators KS / SKS Vertical Split Coupled Inline Pumps Taco Vertical Split Coupled inline pumps set a new standard in service and maintenance. Now available with SelfSensing
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More information"Motors, Power, and Data Loggers Greg Jourdan-Wenatchee Valley College Carol Lewellen-NEEC and BOC Tuesday, May 8, Sessions Session
"Motors, Power, and Data Loggers Greg Jourdan-Wenatchee Valley College Carol Lewellen-EEC and BOC Tuesday, May 8, 2018 3 Sessions Session 1-8:30-9:25 a.m. Motors 101 Session 2-9:30-10:25 a.m. - Power Session
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationREPLACEMENT PARTS FOR CONDENSING UNIT
Revision: P-COND (10-18) PN268631R7 Supersedes: P-COND (02-18) PN268631R6 REPLACEMENT PARTS FOR CONDENSING UNIT MODEL MASA IMPORTANT 1. Always include complete model and serial number so that any specification
More informationBerkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II
Cast Iron Impeller B-/ZPH Threaded Case (NPT), Packing Construction Page 50. Date March 4, 03 Supersedes 07/0/ 3 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B53759 5 3 3600 -/4" 7.94" M07666 B596 0 3 3600 -/4"
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More informationSUBMERSIBLE PUMPS DRAINER SUMP/EFFLUENT
SUBMERSIBLE PUMPS DRAINER SUMP/EFFLUENT LEESON Canada features products by well known manufacturer Berkeley which includes the Toran and Simer brand names. SUBMERSIBLE UTILITY PUMPS GEYSER II 1/6 HP 1/6
More informationAchieve Up To 200% Greater Efficiency And Better Air Flow Performance With GE ECM Technology
Achieve Up To 200% Greater Efficiency And Better Air Flow Performance With GE ECM Technology GE ECM 2.3 ECM X13 What's an ECM? The highest efficiency motor there is! essentially a DC Motor Without mechanical
More informationD Date of Manufacture 2 Disconnect Switch 3 Door Assembly 7 Door Switch 3 DSI Integrated Control Module 3
IMPORTANT 1. Always include complete heater model and serial number so that any specification change can be considered for parts replacement. It can save time and expense. 2. In keeping with our policy
More informationReplacement Parts. Applies to: Model UEAS, High-Efficiency, Low-Static Unit Heater. INDEX by page. References. Form P-UEAS
Form P-UEAS Replacement Parts IMPORTANT 1. Always include complete heater model and serial number so that any specification change can be considered for parts replacement. It can save time and expense.
More informationMAX FLUID TEMPERATURE
Operation is similar to standard centrifugal pumps, except the impeller is driven with a magnetic coupling, eliminating the need for a shaft seal. Magnetic drive pumps must be used where flooded suction
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More informationBH30 SERIES Today s digital intelligence moves your gate
BH30 SERIES Today s digital intelligence moves your gate 1 2 3 4 5 6 7 11 9 8 12 10 WHY BRUSHLESS...? Digital, smart, powerful, elegant, robust and all-italian. 8 1 Standby batteries in the event of power
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationCGUII/CGFU. Model CGUII/CGFU Contents. EBARA PRO Cast Grinder Pumps. Model 32CGUII61.5S
Model Contents Model 3CGUII6.5S 3CGFU6.5S 3CGFU6.5 5CGFU6.S 5CGFU6. 5CGFU63.7S 5CGFU63.7 Section Page Specifications 8 Selection Chart 83 Performance Curves 86 Dimensions 88 Sectional View 83 QDC Information
More informationPARTS LIST CP-210-PL. Series e Close Coupled Centrifugal Pumps. Replacement Parts
Series e-1535 Close Coupled Centrifugal Pumps Replacement Parts PARTS LIST CP-210-PL PARTS LIST CP-210PL SERIES e-1535 Index How to use this Parts List Page 3 e-1535 Pump Exploded View Page 4 Replacement
More informationReplacement Parts List FI 4007 & FI 4007D. SUPERSEDES: NEW EFFECTIVE: December 31, 2018
Replacement Parts List 304-572 FI 4007 & FI 4007D SUPERSEDES: NEW EFFECTIVE: December 31, 2018 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE FI 4007 BEARING FRAME J FI 4007D BEARING
More informationFI / SFI Frame-Mounted End Suction Pumps
Water Circulation Pumps & Circulators FI / SFI Frame-Mounted End Suction Pumps FI Series Pumps provide the ultimate in reliability and ease of installation for heating, air conditioning, pressure boosting,
More informationSECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS
SECTION 221123.13 - DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationGrundfos Home Booster
GRUNDFOS DATA BOOKLET Grundfos Home Booster UPA 15-9, UPA 15-12, UPA 15-16, UPA 12 5/6 Hz Grundfos Home Booster Table of contents 1. Product description 3 Applications..................................................................................
More informationSeries 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling
www.cranepumps.com Series 6XSHD 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationRotron MIL-80 Tubeaxial Fans
Rotron MIL-8 Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationTHREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
More informationSmart controls Reliable operation User friendly design Plug and play operation
Series H-ID RAINSETS Series H-ID Rainsets manage the distribution and water treatment functions of commercial rainwater system installations. The modular H-ID series is designed for indoor installations
More informationreal quality made in italy circulation pumps
GB real quality made in italy circulation pumps real quality made in italy E N E R G Y S A V I N G P U M P S PUMPING TECHNOLOGY Due to the diversity of nominal diameters, body lengths and speeds our extremely
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationMODULAR SINGLE AND DOUBLE WALL BELT DRIVE AIR HANDLER DX OR CHILLED WATER COOLING HOT WATER OR ELECTRIC HEATING
MODULAR SINGLE AND DOUBLE WALL BELT DRIVE AIR HANDLER DX OR CHILLED WATER COOLING HOT WATER OR ELECTRIC HEATING SIZES FROM 600 TO 9,000 All Technical Specifications are Subject to Change without Notice.
More informationWHOLESALER PRICE SHEET
PRICE SHEET WHOLESALER PRICE SHEET WPS-115 Effective January 5, 2015 Replaces Price Sheet WPS-214 Dated February 3, 2014 Minimum Billing: $125.00 These prices supersede all other quotations and are subject
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationReplacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationVSC /VSCS Pumps Technical Brochure
VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationIntroducing Actual. Replacement Value.
Introducing ctual Replacement Value. Pro-Fit replacement parts are designed and built to fit ell & Gossett* and rmstrong** pumps with one notable difference: they re from Taco. So extra care goes in to
More informationRotron HF/ HFV/ HFG Propeller Fans
Rotron HF/ HFV/ HFG Propeller Fans General Propeller Information Propeller Fans have sheet metal blades, usually four or more in number, which are curved to provide an aerodynamic lift and are generally
More informationPump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp
Pump Specifications ELV Series Submersible Sump Pump with OilTector Control ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp ELV_ P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications
More informationMYERS 3MW VERTICAL DISCHARGE WASTEWATER PUMPS. Sewage, high-capacity sump, effluent
The Myers heavy-duty series pumps are designed for residential raw sewage and light commercial applications. The non-clogging two-vane impeller delivers high-efficiency pumping and easily handles trashy
More informationKV / SKV Vertical Inline Pumps
Water Circulation Pumps & Circulators KV / SKV Vertical Inline Pumps Taco KV Series Vertical Inline Pumps meet the latest standards for hydraulic performance and dimensional characteristics. Now available
More informationParker Products: 60 Series ISO 7241 Series B
ISO 7241 Series B Technical Specification s: 1/8-2 1/2 Materials:,, Stainless 303, Stainless 316 Accepts ISO 7241-1, Series B compliant nipples couplers have double O-rings and stainless steel locking
More informationSeries HSC-S Pumps Technical Brochure
Series HSCS Pumps Technical Brochure BX512L Table of Contents Useful Pump Formulas 2 60 Cycle Performance Curves Series HSCS 3 50 Cycle Performance Curves Series HSCS 4 Series HSCS Materials of Construction
More informationMYERS MODELS 4VC & 4VCX
MYERS MODELS 4VC & 4VCX 4" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4VC) AND HAZARDOUS LOCATION (4VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4VC & 4VCX Solids Handling Wastewater Pumps Cut Your Pumping
More informationWATTSAVER PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE
PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE The line of premium efficiency motors is now inverter capable. LEESON s unique IRIS voltage-spike-resistant insulation system is standard at no extra cost. motors
More informationSeries 4XSHV. Specifications: Series: 4XSHV , 3450RPM, 60Hz 2-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling
Series 4XSHV 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,
More informationRotron MIL901 Tubeaxial Fans
Rotron MIL9 Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible
More informationLowara Ecocirc Vario (EV)
Lowara Ecocirc Vario (EV) The speed of the pump can be manually regulated to meet the requirement of the system. The software enables a choice from infinite number of performance curves. Spherical Rotor/Stator
More informationMYERS MODELS 6VC & 6VCX
MYERS MODELS 6VC & 6VCX 6" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (6VC) AND HAZARDOUS LOCATION (6VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 6VC & 6VCX Solids Handling Wastewater Pumps High Operating
More informationBulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program
Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION
More informationWHOLESALER PRICE SHEET
PRICE SHEET WHOLESALER PRICE SHEET WPS-1215 Effective December 14, 2015 Replaces Sheet WPS-415 Dated April 20, 2015 Minimum Billing: $125.00 These prices supersede all other quotations and are subject
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationPROJ. NO SECTION HYDRONIC PUMPS
SECTION 23 21 23 HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationMYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.
More informationWHOLESALER PRICE SHEET
PRICE SHEET WHOLESALER PRICE SHEET WPS-518 Effective May 14, 2018 Replaces Price Sheet WPS-1217 Dated December 11, 2017 Minimum Billing: $125.00 These prices supersede all other quotations and are subject
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationSERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS
420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -
More informationSeries 4XSHM 18 Frame Driver 3" Spherical Solids Handling
Series 4XSHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,
More informationSubmersible Grinder Pumps Type ABS Piranha
Submersible Grinder Pumps Type ABS Main Applications Sulzer s range of submersible grinder pumps, type ABS, contain the most effective cutting system for use in pressure sewer systems. The pumps have proven
More information08 general Purpose Pumps
070 08 general Purpose Pumps InTRODuCTIOn Ballast Pumps Today s Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested
More information30% and Higher Energy Savings with EC Motors. BUILDINGSNY.COM Javits Center, NY March 21-22, 2017
30% and Higher Energy Savings with EC Motors BUILDINGSNY.COM Javits Center, NY March 21-22, 2017 The Strategic Horsepower to Drive Efficiency GREENCROWN Motor Solutions Moderated by: Ron Zeccardi Paul
More informationSeries 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling
www.cranepumps.com Series 4XSHD 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationD Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
More informationGENERAL OVERVIEW BRONZE PEDESTAL ROTARY GEAR N13HDM C992 BRONZE BRONZE HELICAL ROTOR 101BG RUBBER
GENERAL OVERVIEW BRONZE CLOSE COUPLED N970 BRONZE PEDESTAL N4000R BRONZE PEDESTAL ROTARY GEAR N13HDM PLASTIC CENTRIFUGAL 144 RUBBER ROLLER 310F BRONZE CENTRIFUGAL 50P DUCTILE IRON CLOSE COUPLED C992 BRONZE
More informationBrother Mini Series AC Gearmotors
other ini Series Gearmotors Fig 1.1: 1/50~1/6 Hp 1 Phase Wiring FW 1 2 REV 3 Fig 1.2 UL/CSA/CE/RoHS Voltage Horsepower Three Phase 1/50~1/6 Hp E172017 Yes Single Phase 1/50~1/6 Hp E3713 Yes 1 PHASE ELECTRICAL
More informationSeries 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50" Spherical Solids Handling
www.cranepumps.com Series 8SHDU 21 Frame Driver Specifications: DISCHARGE... 8", 125 lb. Horizontal Flange Slotted to accommodate 200mm ISO Flanges LIQUID TEMPERATURE... 4 F (40 C) Continuous VOLUTE...
More information800 Series Control Valves
AGRICULTURE 800 Series Control s VALVE SELECTION GUIDE ENVIRONMENTAL GREEN INDUSTRY nelsonirrigation.com 1 Control s As a hydraulically operated sleeve-type valve, the 800 Series Control is designed for
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More information.2 Section Waste Management and Disposal..5 Section Thermometers and Pressure Gauges Piping Systems.
Issued 2005/06/01 Section 15440 Plumbing Pumps Page 1 of 9 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal..3 Section 01780 Closeout
More informationPART LISTS D-421G-PL. Domestic Pump. Series B35 REPLACEMENT PARTS FOR. 2 ft. NPSH Centrifugal Pumps Styles PF and PVF and HB-35
PART LISTS D-21G-PL Domestic Pump Series B35 REPLACEMENT PARTS FOR 2 ft. NPSH Centrifugal Pumps Styles PF and PVF and HB-35 Index How To Use This Parts List........................................... 3
More informationGROUNDWATER PRODUCTS
GROUNDWATER PRODUCTS GRUNDFOS SQ/SQE FEATURES/BENEFITS: SQ: Rugged Design 1/3-1.5 Hp Integral Motors Good Sand Handling Capabilities High Motor and Pump Efficiencies Built-in Dry-Run Protection Overload
More informationSeries e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL
Series e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL PARTS LIST CP-208G-PL SERIES e-1510 Index Nameplate Data.................................................. Exploded Views...................................................
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationB/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
More informationModel ERSA Energy Recovery Preconditioner for Makeup Air
IMPORTANT 1. Always include complete model and serial number so that any specification change can be considered for parts shipment. It can save time and expense. 2. Specifications are subject to change
More informationTechnical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS
Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS Wet End Rotation Volute Nozzles Impeller Wear Rings Shaft Bearing Frame Bearing Radial/Thrust Lubrication Seal Motor Lifting Bail Volute Discharge
More informationSECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS
SECTION 22 1123.13 DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More information