Environmentally Sealed Pedestal Series

Transcription

1 Environmentally Sealed Pedestal Series brought to you by channell Dedicated to protecting fiber optics through design, innovation, and service.

2 Hostile Environments BEWARE! Introducing Flash: The Superhero of Environmentally Sealed Pedestals. Flash is a tough, environmentally sealed pedestal series. Flash uses its superhuman strength to protect fiber from any environmental element that comes its way. No matter the air, water, dirt, snow, flood, drought or ultraviolet light it encounters, Flash remains sealed, and the ultimate protector. Flash has encountered the test standards and defeated them all, even the occasional bicycle or skateboard villain!

3 Flash is Here... The Dynamic Duo Flash and the Bulk join forces to bring you strength, accessibility, and an optimal above and below ground fiber optic splice and cable management system. Together, this dynamic duo is invincible against any hostile environment it encounters. What is the Bulk? ment cable manage Pit / Vault ies System Ser nell brought to Dedic ated to prote cting you by chan ation desig n, innov s throu gh fiber optic The Bulk is an upgradeable, re-enterable cable management vault system series with the highest performance standards in the industry; making it the leader of the underground. ice., and serv Bulk Brochure Flash 9" x 20" (228mm x 508mm) atop Bulk Vault, 17" x 30" x 24" (432mm X 762mm X 610mm) Fl a s h : T h e U lt i m at e Pr ot ec t o r A g a i n s t : Flood Snow Wind Force Flash is a tough, environmentally sealed pedestal series that serves as the ultimate protector in extremely hostile weather environments. Environmentally sealed: air/water tight Weatherproof and flood proof Meets test standards of GR-771-CORE, IP68, and IEC Structural integrity: impact/solvent/uv resistant

4 The Destiny of Flash is in Your Hands With the support of Bulk, Flash has the ability to perform as an above ground pedestal with Bulk s split thermoplastic pedestal plug lid, or a below grade enclosure with Bulk s swing arm attachment. 1) Select your Bulk vault The Bulk s universal vault body and split thermoplastic pedestal plug lid is available in a wide range of sizes: 1730 (BULK 3) 2436 (BULK 4) 2448 (BULK 5)* 3048 (BULK 7) 2476 (BULK 6)* Bulk vault with split thermoplastic pedestal plug lid *Available in ) Above ground pedestal or below grade enclosure? Flash can interchangeably perform in either application. Above ground pedestal application: Plugs directly into Bulk s split thermoplastic lid Is easily accessible in hostile weather environments and in areas that require regular access Flash in above ground application, atop Bulk vault with split thermoplastic lid Below grade closure application: Attaches directly to Bulk s swing arm bracket Is less susceptible to damage and out of sight in areas of high traffic Can house a variery of closures and dome lengths, depending upon vault size: Size # of Closures Dome Length 1730 (BULK 3) 15" (381mm) 20" (508mm) 2436 (BULK 4) 15" (381mm) 20" (508mm) 24" (610mm) 2448 (BULK 5) two 15" (381mm) 20" (508mm) 24" (610mm) 3048 (BULK 7) two 15" (381mm) 20" (508mm) 24" (610mm) 2476 (BULK 6) two two two 15" (381mm) 20" (508mm) 24" (610mm) Flash in below grade application, attached to Bulk s swing arm bracket (blown fiber without dome shown)

5 Bulk Specifications Region Performance Category Application (Installation Location) Non-vehicular traffic limited to light vehicle. Includes grass surround; if in designated walkway, coefficient of friction should be > 0.5 Americas Light Duty Pedestrian Only Australia, New Zealand, Asia Light Duty Pedestrian Only Non-vehicular traffic limited to pedestrians and cyclists. Areas closed to other traffic UK, Europe, Africa, Middle East Light Duty Pedestrian Only Non-vehicular traffic limited to pedestrians and cyclists. Areas closed to other traffic GVW Max Wheel Load Design Load Test Load Specification Load Category 5,000 lbs. 2,000 lbs. 2,000 lbs. 3,000 lbs ANSI/ SCTE 77 Light Duty, Pedestrian 670 kg 335 kg 6.7 kn 10 kn AS/NZ 3996:2006 Class A 1000 kg 500 kg 10 kn 15 kn EN 124:1994 Class A 15 Together, Flash and the Bulk deliver a patented Channell design: The Plug N Play. The Plug N Play feature provides ultimate access by giving technicians the option of splicing Flash on land, in their service vehicle, or in the vault. How? Technicians simply disconnect Flash from Bulk, splice where they choose, and then reinstall Flash to Bulk. U lt i m at e ver s at i l i t y! Above ground pedestal Step #1 Step #2 Step #3 Subsurface enclosure

6 FiberX Special Weapons The Seal of Steel Channell s lubricated grommet sealing technology offers an instant, reliable, and guaranteed environmental seal with superior cable retention: Offers both cable retention and a guaranteed seal in a single unit Completely environmentally sealed: air/water tight, weatherproof, and flood proof (in accordance with GR-771-CORE, and IEC requirements) Quick, efficient, and tool-less installation: on average, takes less than 1 minute to install Superior pull out strength Accommodates multiple cable configurations Long-term structural integrity High Drop Density Yields the lowest installation cost Increases system reliability by reducing the number of fiber access points Accommodates up to 72 drops per closure Installation at the Speed of Light Tool-less installations that are quick and simple make FiberX products the fastest to install in the industry. Optimal Fiber Splice Management System Flash is a powerfully versatile product series due to its wide range of capabilities and customizable configuration options. Flash offers solutions to both blown fiber and conventional fiber placement methodologies. Green Hornet TM ţ Flash TM ţ Bulk TM ţ Optimus TM ţ Yellow Jacket TM

7 Flash Specifications FL GR-771-CORE = The Americas IEC = International: Australia, New Zealand, Asia, Europe, Africa, Middle East! H AS T e s t P e r fo rm a n c e M ea su r e s Criteria Reference Specification Requirements Sealing IEC ; GR No water intrusion Tightness IEC No continuous air escape Appearance/Visual IEC No performance effecting damage Optical Measurements IEC , 5, and 44 ; GR-771 A.2 Attenuation change M ec h a n i ca l P e r fo rm a n c e S equ e n c e Item Test Reference Specification Requirements 1 Cable Clamping GR ,Optical Measurements 2 Sheath Retention IEC , GR , Optical Measurements 3 Cable Flexure IEC , GR , Optical Measurements 4 Cable Torsion IEC ; GR , Optical Measurements 5 Vertical Drop GR Crush Resistance IEC , GR Axial Compression IEC Impact - Drop Tube IEC , GR Water Resistance IEC ; GR , Sealing 10 Central Strength Member IEC , GR No protrusion 11 Vibration GR ; IEC E n v i r o n m e n ta l P e r fo rm a n c e Item Test Reference Specification Requirements 1 Thermal Aging GR Sealing 2 Assemby and Reconfiguration IEC , GR Temperature/Humidity Cycling GR Temperature Cycling IEC , Sealing 5 Freeze/Thaw GR Water Resistance IEC , GR Sealing 7 Corrosion Resistance IEC , GR Appearance, Sealing 8 Chemical Resistance IEC , GR % Property retention 9 UV Resistance GR % Property retention D e d i c a t ed t o protec ti ng fi ber o p tics th ro u g h d e s ig n, in n ova tio n, a nd service.

8 optimal fiber splice management system Conventional Fiber Splice Tray Design Hinged, stackable, and removable, which enables technicians to splice inside the closure, or remove trays and splice outside of the closure Accommodates single-fusion, mass-fusion, or mechanical splicing Each splice tray accommodates up to 24 single-stacked splices or 48 double-stacked splices Compatible with passive optical filters such as: multiplexers, splitters, and patch panels Slack Storage Tray Allows any expressed or uncut tubes/fibers to be looped, stored, and routed within the back of the enclosure Permits more slack and better organization Flash 9"x 24" (229mm x 610mm) shown with square trays, spliced with conventional fiber. NOTE: Oval trays also available. Splice Holders Accommodate, secure, and protect single-stacked or double-stacked splices Each splice tray features 2 splice holders Each holder has a max capacity of 12 single-stacked spliced or 24 doublestacked splices Accommodates passive optical compnts such as splitters and CWDM multiplexers Drop Door Access Lockable drop door access Green Hornet TM Flash TM Bulk TM Optimus TM Yellow Jacket TM

9 ! W PO FLASH 6 Size: 6 x 15 (152MM x 381MM ) 6" x 20 " (152MM x 508MM ) Max Splice Capacity: 4 splice trays: 96 single-stacked 192 double-stacked Drop Density: 16 drop ports, 1 main oval port, 1 branch port, 1 spare port for bonding and grounding Flash 6"x 20" (152mm x 508mm) with single circuit and single element oval trays, atop Bulk vault 17" x 30" x 24" (432mm X 762mm X 610mm) Note: single element trays shown in blue FLASH 9 Size: 9 " x 20 " (229MM x 508MM ) 9 " x 24 " (229MM x 610MM ) Max Splice Capacity: 6 splice trays: 144 single-stacked 288 double-stacked Drop Density: 16 drop ports, 1 main oval port, 2 branch ports, 1 ground port Flash 9 x 24 (229mm x 609mm) with 24 fiber splicing circuit flat trays, atop Bulk vault 24" x 36" x 24" (610mm X 914mm X 610mm) D e d i c a t ed t o protec ti ng fi ber o p tics th ro u g h d e s ig n, in n ova tio n, a nd service.

10 optimal fiber splice management system Blown Fiber Tray Design The oval tray design used in blown fiber applications allows you to mix and match the tray modules to create a customized combination of single circuit and single element trays. Therefore, the max splice capacity may vary depending on what combination is used. Single circuit tray Single element tray Can accommodate passive optical compnts such as splitters (photo not shown) Size: 9 x 20 (229MM x 508MM) Max Splice Capacity: 56 Single Circuit Trays 4 splices per tray 224 fiber splices 28 Single Element Trays 12 splices per tray (double-stacked) 336 fiber splices (double-stacked) Max Drop Density: 72 individual drops Size: 9 x 24 (229MM x 609MM) Max Splice Capacity: 88 Single Circuit Trays 4 splices per tray 352 fiber splices 44 Single Element Trays 12 splices per tray (double-stacked) 528 fiber splices (double-stacked) Max Drop Density: 72 individual drops Flash 9" x 24" (229mm x 609mm) shown with oval trays and spliced with blown fiber Green Hornet TM Flash TM Bulk TM Optimus TM Yellow Jacket TM

11 Connect & Protect with the FiberXconnect The Xconnect is a special weapon used by the FiberX team to connect the central network to the blown fiber tubes; and most importantly, protect this connection. Capable of connecting and protecting 10 blown fiber tubes Environmentally sealed: Air tight/water tight Impervious to hostile environments Quick installation Xconnect with blown fiber tubes CONNECT Environmentally sealed with Channell s lubricated grommet sealing technology. Blown fiber Flash unit includes tubes and endcaps Dedicated to protecting fiber optics through design, innovation, and service.

12 FiberX TM is a superhero fiber optic product team in the Channell Universe that is dedicated to the protection of fiber optics. FiberX is committed to making the world of fiber optics a better place through design, innovation, and service. FiberX products feature an optimal fiber splice management system that is simple, organized, and craft-friendly. With a wide range of features and accessories, FiberX offers a customized solution to meet the needs of any FTTX application. The strength of FiberX has evolved from Channell s 90 years of experience and leadership in thermoplastic enclosures for the telecommunication and broadband industries. FiberX embodies the same patented, reliable, and proven features that have contributed to Channell s reputation and great success. For more information about fiberx products, Call BUTT SPLICE CONFIGURATION CLOSURE SERIES FREE-BREATHING CLOSURE SERIES INLINE SPLICE CONFIGURATION CLOSURE SERIES ENVIRONMENTALLY SEALED PEDESTAL SERIES CABLE MANAGEMENT PIT/VAULT SYSTEM SERIES USA: Channell Commercial Corporation, Temecula, CA Tel Fax CANADA: Channell Canada, Inc., Mississaugua, Ontario Tel Fax EUROPE, MIDDLE EAST, AFRICA: Channell Ltd., London, UK Tel Fax AUSTRALIA, ASIA, PACIFIC RIM: Channell Pty. Ltd., Seven Hills, Australia Tel Fax WORLDWIDE HEADQUARTERS: Channell Commercial Corporation Tel Ynez Road P.O. Box 9022 Temecula, CA USA All specifications subject to change without notice. Printed in U.S.A M Channell Commercial Corporation. All rights reserved.