Service Fieldbus Engineering and Consulting

Transcription

1 Change from one to two columns Data Sheet DS/SEE200-EN Rev. B Service Fieldbus Engineering and Consulting Consulting Bus technology & tool consulting Engineering Bus topology design

2 Service Fieldbus Engineering and Consulting SEE220 Bus technology & tool consulting Service description Demonstration of optimum fieldbus technology. The first step involves establishing the optimum fieldbus technology in close consultation with you and the system manufacturer. We use presentations and consultations to show you the options offered by the various technologies. Our aim is to answer the following questions: Which bus is best for your application? What factors need to be taken into account with a bus system? Which are the possibilities of the ABB stand-alone tools? Service content The following presentation content can be offered: PROFIBUS DP/PA & HART technology presentation FOUNDATION fieldbus-h1 technology presentation HART, PROFIBUS DP/PA and FOUNDATION fieldbus-h1 technology comparison FDI, DTM, EDD, EDD/CF and GSD device driver technology presentation Cost efficiency & cost comparison Fieldbus demo equipment Fieldbus live demo Possibilities at ABB stand-alone tool We take on board the basic conditions/requirements in consultation with you: Control system / tool selection "In the field or "in the host control Ex area, redundancy, and performance Installed basis Available fieldbus expertise ZVEI classification Class 1, 2, 4 Preparation Agree service content/agenda Agree number and knowledge level of participants Agree date and duration. The following is recommended: 1 day 6 hours Agree consultation venue Follow-up None Customer involvement If desired Description of planned project Provision of project-relevant documentation Items provided by ABB Presentations as PDF files Assurance Of technical and factual accuracy at the time of consultation ABB assumes no liability for the accuracy of manufacturers' specifications. Price and price structure As quoted in the offer Time, room and location of service provision By arrangement Working days (Monday Friday) On site or at an ABB branch At the end, we establish the best fieldbus technology & tool together. Other topics can be included or new ones put together on request. 2 DS/SEE200-EN Rev. B Service Fieldbus

3 SEE240 Bus topology design Service description Bus topology engineering. Once the optimum fieldbus concept for your application has been established, the bus topology will be created. The field devices distributed across the system are logically assigned to individual bus segments and the number of bus nodes for each segment is determined. This is subject to the cable lengths, required cycle times, and selected transmission rates and function blocks in the fieldbus devices. A current balance is also drawn up and, in the case of ex areas, proof of intrinsic safety (FISCO fieldbus intrinsically safe concept) is provided. The appropriate network components are then selected, depending on ambient conditions and installation effort. Service content For everything from the field device right up to the input for the bus master card of the control system, we offer solutions to accommodate the following protocols, fieldbus devices, and network components. PROFIBUS DP/PA FOUNDATION fieldbus-h1 Non-manufacturer-specific fieldbus devices and network components In the ex area and non-ex area Design, calculation, and proof. Segmentation of the fieldbus devices per bus line & bus segment per process unit Calculation of bus segments based on current and voltage consumption and bus cable length Calculation of cycle times per bus line FISCO evaluations Creation of documentation: Bus topology drawing (network) including Segmentation of fieldbus devices Cable lengths Current & voltage values Cycle times Network components Calculation table (general survey) including Current & voltage values Cycle times Parts lists (general survey) including Segmentation of fieldbus devices Bus address allocation Type designation FISCO - proof Project-specific documentation The following is not included in this service: Calculation and design of controls Calculation of cycle times in the case of "control in the field ZVEI classification Class 1, 2, 4 Preparation Agree on whether it is desirable/necessary for the specifications to be collected on site Evaluate the specifications for completeness (see "Customer involvement") Follow-up Once the documents have been handed over, a one-off revision component is included in the service covering modifications to up to 10% of the fieldbus devices/assignments. Service Fieldbus DS/SEE200-EN Rev. B 3

4 Service Fieldbus Engineering and Consulting SEE240 Bus topology design Customer involvement Description of planned project Provision of project-relevant documentation, e.g. Distribution and number of measuring points Segmentation into ex areas and non-ex areas Exact type designation of fieldbus devices Data sheets of third-party fieldbus devices Removals from control system (I&C room) to the measuring point Desired maximum cycle time per bus line Desired reserve for nodes per segment, for cable lengths, and for cycle times Preferences based on network components Items provided by ABB Documentation as PDF files Assurance Of technical and factual accuracy at the time of release based on the specifications. ABB assumes no liability for the accuracy of manufacturers' specifications or customer documentation. ABB assumes no liability for the integration of the designed bus system into existing systems or interfaces of other subsections. Price and price structure As quoted in the offer Fieldbus device = active device with bus interface. E.g. transmitters, drives, positioners, recorders, remote I/O, etc. Time, room and location of service provision By arrangement Working days (Monday Friday) ABB Germany Exchange of information/documentation via phone & Optional: on-site visit For the purpose of collecting the specifications and presenting the results By arrangement Working days (Monday Friday) On-site 4 DS/SEE200-EN Rev. B Service Fieldbus

5 Ordering information Consulting SEE220 Bus technology & tool consulting per hour Consulting by ABB fieldbus specialists for HART, PROFIBUS DP/PA and FOUNDATION fieldbus-h1. Which bus is the best for your application? What should be considered for a bus facility? ABB tool consulting Recommendation: 1 day 6 h Catalog No. 3KXS130220L0001 Pre and post-processing Overall (fixed price) 3KXS130220L0010 Allowance and expenses Daily allowance, transportation costs, accommodation and further incidental expenses acc. to separate cost rate table (No. 2179c). Fulfillment will be charged by time and effort. 3KXS130220L0050 Engineering SEE240 Bus topology design per field bus device Calculation, design and documentation of a PROFIBUS DP/PA or FOUNDATION fieldbus-h1 network. Cable length, energy balances, cycle times and FISCO confirmation. Catalog No. 3KXS130240L0001 Pre and post-processing Overall (fixed price) 3KXS130240L0010 Visit on-site per hour Optional Recording of the specifications Presentation of the results Fulfillment will be charged by time and effort. 3KXS130240L0030 Allowance and expenses Optional Daily allowance, transportation costs, accommodation and further incidental expenses acc. to separate cost rate table (No. 2179c). Fulfillment will be charged by time and effort. 3KXS130240L0050 Service Fieldbus DS/SEE200-EN Rev. B 5

6 Notes 6 DS/SEE200-EN Rev. B Service Fieldbus

7 Notes Service Fieldbus DS/SEE200-EN Rev. B 7

8 Contact us ABB Automation GmbH Service Instrumentation Kallstadter Straße Mannheim, Germany Customer service center: +49 (0) * automation.service@de.abb.com * 14 cents/minute from German landlines, max. 42 cents/minute from mobiles. Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents - in whole or in parts is forbidden without prior written consent of ABB. DS/SEE200-EN Rev. B Copyright 2012 ABB All rights reserved 3KXS130200R1001 Sales Service