PREMIUM PLASTIC PROTECTION PARTS
|
|
|
- Violet Hancock
- 5 years ago
- Views:
Transcription
1 PREMIUM PLASTIC PROTECTION PARTS
2 MATERIAL OPTIONS Consistently low prices EP 180 Pressure Pipe Protection Uniplugs for PVC pipes DN 50 DN 600 EP 190 Driveshaft Protection Caps with Fitting Key EP 200 Stud Protection Caps with Knurled Head EP 230 Push-In FlexiPlugs for Pipe Ends DN 10 DN 200 EP 240 Recessed Caps for Pipe Ends 4.1/2 48. EP 250 Open Bevel Edge Protectors for Pipe Ends 4.1/ EP 260 Pipe Protection Caps 130 Dimensions from Ø mm The Original EP 260 Large Pipe Protection Caps 12." 64." EP 270 Parallel Protection Plugs from Ø mm For prices, free samples and online ordering, visit our web site at
3 WHY PAY MORE over 250 million Parts ex stock EP 270 TK Tapered Protection Plugs Expanded! from Ø mm EP 275 High Temperature Tapered Silicon Plugs EP 277 High Temperature Silicone Caps EP 280 Tapered Protection Plugs / Caps 39 EP Tapered Protection Plugs / Caps Large Flange EP 300 Valve Flange Face Protection Plugs DN 10 DN DIN 2402 EP 303 Valve Flange Face Protection Plugs DIN 2331 DIN 2632 DIN 2633 DIN 2634 DIN EP Stud Hole Fitting Flange Pro-Tectors.1/2"-150/ "-150/300 Ibs. EP Push-In Flange Protectors ANSI, DIN The Original.1/2" 16."- Full Face UK Customer Service Telephone ( 0191)
4 MADE-TO-ORDER Short term custom-made solutions EP 310 Outside Fitting Flange Protectors The Original DN 15 DN 300 Full Face EP 310 Outside Fitting Flange Protectors The Original ANSI.1/2" 10." Full Face EP 320 Barrel Plugs Domed Head Parallel Shank EP Barrel Plugs Flat Head Parallel Shank EP 350 Snap-Fit Grip Plugs 61 EP 360 Snap-Fit Grip Plugs with Large Flange 63 EP 370 Thermoplastic Rubber Plugs 65 EP 380 Push-Fit Side Release Plug 1 strong Fin 67 EP 385 Push-Fit Side Release Plug 2 strong Fins For prices, free samples and online ordering, visit our web site at
5 WHY PAY MORE In-House Tool Design EP 400 Threaded Protection Plugs BSP Metric EP 434 Threaded Sealing Plugs HD-PE, red BSP Metric UN/UNF EP 435 Threaded Sealing Plugs, PA 6, yellow BSP Metric UN/UNF HD-PE EP Threaded Sealing Plugs with Drain Head design Metric UN/UNF EP Threaded Sealing Plugs with assembled Washer BSP Metric UN/UNF EP Threaded Sealing Plugs with assembled O-Ring BSP Metric UN/UNF EP Threaded Caps Flanged Heavy Duty BSP Metric UN/UNF EP Rectangular Inserts Ribbed Plugs for Rectangular Tubing EP 620 Rounds Inserts Ribbed Plugs for Round Tubing UK Customer Service Telephone ( 0191)
6 FLEXIBLE PRODUCTION 24 Hours Delivery Service EP 700 Square Inserts Ribbed Plugs for Square Tubing EP 800 Bolt and Nut Protection Caps EP 810 Bolt and Nut Anti-Corrosion Snap Caps Metric and UNC Bolt Joints EPN Nylon Cable Glands Liquid Tight Strain Relief Type»A«for quick installation EPN Nylon Cable Glands Liquid Tight Strain Relief Type»B«for extreme mechanical demands EPN Nylon Cable Glands with Spiral Flex Protector VO VO EPN Hexagonal Locknuts with flange EPN Hexagonal Locknuts Flangeless EPN Threaded Blanking Plugs For prices, free samples and online ordering, visit our web site at
7 WHY PAY MORE Flexible Logistics EPN 460 Threaded Sealing Grommets, semi blind EPN 470 Threaded Sealing Grommets, open EPN 520 Multi Sealing Inserts EPN 530 Dust Disks EPN 550 Thread Reducers EPN 600 Thread Adapters M M PG PG M PG PG M EPN 650 Thread Enlargers M M PG PG 135 EPN Brass Cable Glands Liquid Tight Strain Relief EPN EMC Brass Cable Glands UK Customer Service Telephone ( 0191)
8 CUSTOM PARTS Professional Customer Service EPN 710 Brass Locknuts Flangeless Metric PG EPN 715 EMC Brass Locknuts with cutting edges Metric PG EPN 720 Brass Thread Reducers Metric PG EPN Brass Blanking Plugs EPN Brass Thread Enlargers EPN Brass Thread Adapters Metric PG Metric PG M PG PG M SES Raised Face Flange Protection Plugs ANSI DIN SSR 3500 Sprayout-Safety Flange-Rings DN 15 DN SRM 3600 Sprayout-Safety Steel-Rings DN 10 DN 1,000.1/ PP stainless steel Heat Resistant For prices, free samples and online ordering, visit our web site at
9 WHY PAY MORE Certified Plastic Injection Molding Material LD-PE HD-PE LLD-PE PHT TPE Pro-Sicon PP PS SB PA Materials Properties Chart Temperature Resistance intermittent continuous resistant against non resistant against transparency non oxidising acids non oxidising alkalis alcohol solvents fuels oils greases weak acids oxidizer chlorohydrocarbons solvents benzol acids translucid transparent opaque translucent CAPTOP, DURASAFE and QUICKFIT Plastic Parts are predominantly manufactured from polyethylene (LD-PE, HD-PE), polypropylene (PP) and nylon (PA6). This involves the use of carbon and hydrogen. These plastic parts are completely recyclable. Please refer to the individual product descriptions in this catalogue for further properties. For special requirements of a mechanical, thermal or chemical nature, we can also manufacture in a wide choice of other materials. Please contact us with further details of your specific needs. Standard Colour Options Colour Remark Colour code sulphur yellow Colour to DIN 4818 Standard RAL 1016 orange Colour to DIN 4818 Standard RAL 2004 red Colour to DIN 4818 Standard RAL 3000 blue Colour to DIN 4818 Standard RAL 5012 green Colour to DIN 4818 Standard RAL 6001 dark grey Colour to DIN 4818 Standard RAL 7001 light grey Colour to DIN 4818 Standard RAL 7035 brown Colour to DIN 4818 Standard RAL 8007 white Colour to DIN 4818 Standard RAL 9010 black Colour to DIN 4818 Standard RAL 9005 CAPTOP, DURASAFE and QUICK- FIT Plastic Parts are manufactured in a range of standard colours corresponding to the individual product descriptions in this catalogue. In addition, further colours are available for special production runs at an additional cost. Variations in standard colours may occur occasionally. This is unavoidable due to differences in both pigments and raw plastic material properties. For additional colours, please contact us with your specific needs. General Tolerances In view of the flexibility and stretch of most of the materials used in Protec parts tolerances may vary in accordance with PN 1/16901 and DIN ISO UK Customer Service Telephone ( 0191)
10 Kunststoffwerk Werkzeugbau Im Hegen D Oststeinbek Telefon: Telefax: sales@protecinfo.de Princes Par rincesway North Team Valle Tyne & W Telephone: (0191) Facsimile: (0191) sales@protecinfo.co.uk Zone d activités de Domagne Ceyzériat Tél.: Fax: sales@protecinfo.fr No.1 in Premium Plastic Protection Parts at the best Price in the Market PREMIUM PLASTIC PROTECTION PARTS
Cable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
Accessories Cable glands
Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
Pöppelmann KAPSTO product range: 3,000 solutions. Free samples. No minimum order quantities. Available from stock. We are doing it.
Pöppelmann KAPSTO product range: 3,000 solutions. Free samples. No minimum order quantities. Available from stock. We are doing it. CAPS PLUGS TAILORED SOLUTIONS 2 Contents Overview of KAPSTO products
KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED
KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED Our transit protection range is perfect for securing items from damage during transit. Check out our economical and easy ways to keep your furniture safe. We
ToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Clamping Handles & Adjustable Tension Levers. Leaflet No. A03.1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A03.1 Clamping Handles & Adjustable Tension Levers I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are
A SOLUTION FOR ALL YOUR MASKING NEEDS
A SOLUTION FOR ALL YOUR MASKING NEEDS Numerous parts available for masking applications Materials to suit the demand of finishing processes such as paint coating, e-coating, powder coating and anodizing
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
Product Overview. Think Plastic ~ think
Product Overview Think Plastic ~ think 2 Welcome to this Product Overview which is intended to present a popular cross-section of the products we manufacture, source and distribute to Protect, Package
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate valve is a bi-directional valve widely used in the Pulp and Paper industry (paper recycling) and especially designed to handle high concentrated or contaminated
Gemini switchboards for all applications
Gemini switchboards for all applications When the best is truly within reach 1SLC805001B0202 1 There is a model to satisfy every situation have a very high degree of protection: IP 66. Particularly strong
INVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
Pipe and Flange Protection
Pipe an Flange Protection Pipe Caps 78-82 Pipe Plugs 82-83 Flange Protection 84-89 77 Protect! Pipe an Flange Protection Moss offer a wie range of Plastic Protection Proucts for pipes an flanges. Our range
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
Grommet TET. Cable glands. Basic Data. Application. Press the grommet into the hole.
Basic Data Description s available in two different materials, EPDM and CR. Suitable for Untapped holes of material from 0.5 to 4 thickness. For completely dust and watertight cable and pipe inlets. Advantages
D-Sub adapter Cable entry protection with metric cable entries Cable entry protection with Pg cable entries
Contents Page D-Sub adapter... 40.02 Han Split Hood... 40.04 Cable entry protection with metric cable entries... 40.06 Cable entry protection with Pg cable entries... 40.08 Coding for Hoods/Housings and
RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
Plastic Handles, T-Handles & PVC Grips. Leaflet No. A06.1
I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Leaflet No. 06.1 Plastic Handles, T-Handles & PV Grips I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Who we are Rencol s flexible manufacturing
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
Stirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
TEC LINE PE/PVC PIPES
TEC LINE PE/PVC PIPES 100 % MADE BY MSW 100 % MADE BY MSW TEC LINE PVC-U INDUSTRIAL PIPE The MSW tec line PVC-U plastic pipes are superbly suited for the application in industry, agriculture, swimming
Empty enclosures IEC 62208
374 www.hensel-electric.de/en in accordance with for customized solutions and individual applications for example for low-voltage switchgear and controlgear assemblies i n accordance with the IEC 61439-series
Thermoplastic Centrifugal pump, Type NM
Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
Chapter 1 Pipes and fittings PVC - PE
Chapter 1 Pipes and fittings PVC - PE Solvent weld fittings Threaded connections Ball valves & butterfly valves Page 1-20 Page 21-33 Page 34-37 Slide valves & check valves Solvents & sealants Tools Page
Talbot Pushfit Service Fittings
Talbot Pushfit Service Fittings Talbot Pushfit Talbot Pushfit fittings are quick and easy to use, with no nuts to loose or leave undone. Simply push the pipe into the fitting, The grip and seal on the
UNIDIRECTIONAL Knife Gate Valve
30/10/2013 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve, with wafer design and quick opening and closing. Body made up of two screwed down halves, with slides to provide smooth operation.
Accessories product range
Accessories 199 Accessories product range Type SB/SBF (spiral tape) Spiral tapes are used to bundle cable harnesses efficiently and simply. The spiral tapes also protect the insulation of the wires. Page
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
Technical Information
Technical Information Materials ISO- Code Material Colour Operating Temperature PA Polyamide Light grey PP PP-EL natural PP PVDF PVDF-EL PFA PTFE PTFE-EL PEEK Polypropylene Polypropylene Polypropylene
Pressure relief valve DHV 712-R set range: 0,3-10,0 bar
Pressure relief valve DHV 7R set range: 0,3 0,0 bar Benefits pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
Part-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
EPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands
CONNECTOR ACCESSORIES Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands D Series Pressure Screws 413 U Series Washers 413 Sealing Rings 413 Neoprene & Viton Concentric Sealing
VXE Easyfit 2-way Ball Valve (DN15 - DN50)
The Durapipe Easyfit valve allows customers to brand or label the valve through specialist software that is provided with the product. This innovative technology means that companies can easily own-brand
HIGH QUALITY AND RELIABLE HOSE AND FITTING PROTECTION
HIGH QUALITY AND RELIABLE HOSE AND FITTING PROTECTION Essential parts to safeguard the production, testing, storage and transportation of fluid handling components and equipment. CAPS AND PLUGS protect
DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
Diaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
Catalogue of Accessories
Catalogue of Accessories Room Controller with CO 2 Sensor 3 CO 2 Sensor 4 F7 Filter 400 x 220 x 48 mm 5 Carbon Filter 6 Design valve circle 7 (for pipes Ø 100, 125 and 160) Design valve square 8 (for pipes
EFFICIENT SPRAYERS FOR CLEANING, SANITATION AND DISINFECTION
EFFICIENT SPRAYERS FOR CLEANING, SANITATION AND DISINFECTION Brand quality that pays off - 20 years spare parts supply guaranteed - Numerous accessories available www.mesto.de Foamer sprayers from MESTO:
NAF-Duball ball valves Maintenance and installation instructions List of spare parts
NAF-Duball ball valves Maintenance and installation instructions List of spare parts Fi 41.61(4)GB 08.01 Contents SAFETY General 1 Lifting 2 Receiving inspection 3 Installation 4 Flange gaskets 5 Starting
Order No light grey. Order No black
DPP- Plastic dome plug Body: Polyamide (V2 acc. to UL94) Sealing: Neopren Dynamic: -20 ~+80, short term:100 _ Easy and quick assembly Color: RAL7001 silver grey RAL7035 light grey RAL9005 black Blue, Red
Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
Direct drive electronic position indicators
Direct drive electronic position indicators DD51-E ELESA original design Direct drive electronic position indicators with battery power supply Base and case High-resistance polyamide based (PA) technopolymer.
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
Illston & Robson Limited
Directions From M6/A38M Leave A38M at the middle ring road. At the 4th roundabout go left up the old Coventry Road towards the Blues Ground. Take the 2nd right onto Arthur Street. Turn left and then right
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
UNIDIRECTIONAL Gate Valve
23/04/2013 UNIDIRECTIONAL Gate Valve Unidirectional flanged gate valve (bidirectional option to order), designed for high pressure applications, with self cleaning seal. Single piece die cast body with
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
CABLE AND PIPE ENTRIES
CABLE AND PIPE ENTRIES The Company Offices in Nässjö Sweden Offices in Nässjö Sweden Warehouse- and production facility in Nässjö, Sweden Tapper Sealing Technology AB is the production and export division
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
J-600. Parts catalog EDITION - 06/2007 CODE English version
J-600 English version EDITION - 06/007 CODE - 979 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 305-00 - Fax: +55 35 306 E-mail: export@jacto.com.br
White House Products Ltd
White House Products Ltd Issue 5 - Section 23 To view a gear pump, please click on the name below or use the bookmarks in your PDF software. To return to this page, please click on the red text in the
INFORMATION. Hybrid cables. Description
Description INFORMATION This chapter shows the technical data of the hybrid cables available at SEW EURODRIVE. For assignment of hybrid cables to the products, refer to the respective chapters..1 Description
Cable Accessories. Cord Grips QUALITY - FASTER THAN YOU THINK!
Cable Accessories Cord Grips QUALITY - FASTER THAN YOU THINK! SAB North America is an industry leader in the design and manufacturing of flexible cables and continuous flex products. For over 50 years
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Diaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
Pressure relief valve DHV 718
Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
UNIDIRECTIONAL Guillotine Valve
Unidirectional "LUG" guillotine valve. Monobloc cast body with interior slides for optimum movement of the gate during operation. Provides high flow rates with low pressure drop. Various seat and packing
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
Rotary blade level indicators Level limit switches for bulk goods. Accessories
Storm tape Weather protection hood for outdoor use as protection against overheating in the case of strong radiation from the sun. -SH Weather protection hood with storm tape... 8,-- Material PVC, RAL
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
Process Inline Filter Protective filter PLF2-9HF
Process Inline Filter Protective filter PLF2-9HF Specifications Nominal size: DN 300 - DN 600 Q s max: 3000 m 3 /h p s max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Protective
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
Pull handles, tubular handles, recessed handles
, tubular handles, recessed handles 303 K0187 170 R25 55 14 M8 35 R12 140 32 82 R8 14 M8 57 uroplast PF 31, black. ushing brass or galvanized steel. igh-gloss polished. K0187.101 25 ssembly: From the rear.
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
UNIDIRECTIONAL WAFER Knife Gate Valve
03/01/2011 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES
Technical Information TI 240F/00/en Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES Compact capacitive level probes (with European certificates). Fully and partially insulated rod and
GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER
GD 000 series Parts list for model: GD 005-0-0V: 08700 GD 00-0-0V: 08800 GDS 00-0-0V: 08900 HDS 005-0-0V: 08600 Made for ADVANCE /99 FORM NUMBER 56045 TABLE OF CONTENTS SERVICE KIT GD 005, GD 00, GDS 00
Information Sheet Polyethylene Tank Assemblies
Information Sheet Polyethylene Tank Assemblies No. 27421 10 Gallon Tank Assembly Ultraviolet resistant, yellow polyethylene tank. Molded recesses for mounting of any LMI Series A, J, or P pump. Convenient
Single pole connectors
Cam-Lok J-Series E1016 receptacles Cable Size #6 AWG 250 MCM 600V AC/DC, Up to 400A Continuous NEMA 3R J-Series E1016, elastomeric, threaded stud Double cam principle provides a positive, vibration-proof
ALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
Spare parts list ( ) Spare parts list Treadway EN
Spare parts list (5.970-738.0) Spare parts list Treadway 2011-06-17 EN Table of contents Spare parts list Treadway (5.970-738.0)... 3 10 Individual parts (0.141-045.0)... 4 20 Frame (0.141-298.0)... 6
Inserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
Push-in RTD Temperature Probe with Connecting Cable
Data Sheet 902150 Page 1/6 Push-in RTD Temperature Probe with Connecting Cable Temperature range from -50 to +400 C As single or double RTD temperature probe In 2-wire, 3-wire or 4-wire-circuit Connecting
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
FLUX walking aid Spare Parts Catalog
FLUX walking aid Spare Parts Catalog GB/US When ordering spare parts, please always indicate the following basic data to ensure smooth delivery: ) Serial no. of the product ) Frame width ) Frame colour
REUSABLE PLASTICWARE LABORATORY PLASTICWARE 126 REUSABLE PLASTICWARE
REUSABLE PLASTICWARE GRADUATED CYLINDERS PP tall, class B per DIN 12681/ISO 6706, highly transparent, with raised scale and ring marks at the primary scale points, hexagonal base Volume Code Tolerance
Industrial Automation Supply -- Tel: Cable entry plate KDP plastic round
Cable entry plate KDP plastic round 79 Cable entry plate KDP plastic round Advantages Straight in! Now also for round cut-outs Install electric cable and pneumatic hoses with minimal effort, saving time
Chemical Pumps. With mechanical seal. Non-Metallic Close-Coupled Chemical Pump Type NP-B
Chemical Pumps With mechanical seal Non-Metallic Close-Coupled Chemical Pump Type NP-B In PP / PE-UHMW / PVDF Casing dimensions to EN 2288 / ISO 288 Applications Type NP-B chemical pumps are the solution
Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
COMPACT XPANEL RADIATORS XCOMPACT
XPANEL RADIATORS XCOMPACT COMPACT The Compact 4-connector profile radiator is fitted with 4 x ½ BSP connections at the side. The vertical profile is 33 mm and this in combination with the convection fins
Factor 1) Modulating torque 4) [Nm]
![Factor 1) Modulating torque 4) [Nm]](/thumbs/74/70996135.jpg "Factor 1) Modulating torque 4) [Nm]")
Nominal Max. valve Modulating 4) Valve Valve attachment Gearbox Reduction ratio Standard EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Modulating Input shaft 2) Weight 3) Option DIN 3210 Standard
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat