Smart controls Reliable operation User friendly design Plug and play operation

Transcription

1 Series H2-ID1 RAINSETS Series H2-ID1 Rainsets manage the distribution and water treatment functions of commercial rainwater system installations. The modular H2-ID1 series is designed for indoor installations where mechanical room space is limited. Integrated with Constant Pressure Pump Controls, H2-ID1 rainsets ensure a reliable water supply despite varying demands, making H2-ID1 Series systems one complete solution for your project's rainwater management needs. Advantages Smart controls Reliable operation User friendly design Plug and play operation Features Pump System Variable speed constant pressure control High TDH stainless steel submersible pump Dry-run protection High efficiency pump and motor Soft-start Over-voltage and under-voltage protection Overload protection Pipe material Schedule 80 PVC, 304 or 316 stainless steel Standard pipe connection is 2 inches (50mm) Floating extractor with suction hose Rainset Controls Single point power connection Color touchscreen operator interface Multiple flow sensor display and totalizers PSI display Tank water level controls Back-up water control integration Series 700 submersible pressure transducer UL/cUL 508A electrical panel listing features cont.! Warning Series H2-ID1 (Actual design may vary) Enclosure Enclosure is finished in ANSI 61 gray powder coating Formed 12 gauge steel Smooth, continuously welded seams Lifting eyes provide for easy enclosure handling Doors are supported with heavy gauge continuous hinges and secured with a three point latch Oil resistant gaskets are permanently secured and mechanically retained Rainwater supplied by BRAE rainwater harvesting systems is not potable water and is not intended for potable water applications. Do Not Drink Water supplied from BRAE rainwater systems and related equipment. Users shall determine the suitability of the product for the intended application before using. BRAE product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact BRAE Technical Service. BRAE reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on BRAE products previously or subsequently sold. Job Name Contractor Job Location Approval Engineer Contractor s P.O. No. Approval Representative ES-BR-H2-ID1

2 HOW TO ORDER: MODEL: H2 - ID Series H2-ID1 Rainset Pump Style Submersible (S) Number of Pumps Simplex (1) HP of Pumps Voltage: [required voltage is -10% / + 6% of the nominal voltage]: 115 (Single Phase) (P1) (Single Phase) (P2) (Three Phase) (P3) 460 (Three Phase) (P4) 575 (Three Phase) (P5) *Contact BRAE support for system details Design Flow (GPM / m 3 h) (Note: GPM is standard unit) Operating ranges are: 24 GPM / 5.45 m 3 h 40 GPM / 9 m 3 h (40) 40 GPM / 9 m 3 h 60 GPM / 13.6 m 3 h (60) 60 GPM / 13.6 m 3 h 80 GPM / 18.1 m 3 h (80) Setpoint Pressure (PSI) [MAX 100 PSI/6.89 BAR] Flushing Sediment Strainer SF Micron (100) Standard SF50-50 Micron (50) SF25-25 Micron (25) [Automatic] None (00) Cartridge Filtration C Micron (150) C50-50 Micron (50) Standard C20-20 Micron (20) C5-5 Micron (5) C1-1 Micron (1) None (00) Water Treatment Combinations UV Only (01) UV Disinfection and Dye Injection [Remote Mount] (02) UV Disinfection, Dye Injection [Remote Mount] and Chlorine Injection [Remote Mount] (03) UV Disinfection and Chlorine Injection [Remote Mount] (04) None (00)

3 SYSTEM OPTIONS: Auxiliary Water Supply (Back-up supply) DW Bypass (Ordering Code: ) Standard Remote Valve Location/Direct Fill (Ordering Code: ) Optional Water Treatment Recirculation Loop None (Ordering Code: ) Recirculation Required (Ordering Code: ) Hydropneumatic Tank (shipped loose)(select from chart) HOW TO ORDER: TANK MODEL Pressure (Specify PSI) Tank Model Volume Gal - Max Acceptance Factor Diameter Height Shipping Wt (150PSI) (175PSI) (250PSI) (300PSI) L in. mm in. mm Lbs Kg Lbs Kg Lbs Kg Lbs Kg WX WX / / WX / / WX / / WX / / WX / WX WX / WX / WX / WX / WX WX WX WX WX WX WX Add "C" to the tank model for ASME stamped tanks (Example: WX-402C). ASME stamp applies to 401, 402, 403, 404, 405, 406, and 407 models ONLY NOTE: H2-ID1 Rainsets integrate a 4.4 gallon pressure tank as standard. This applies only when another sized pressure tank is not specified.

4 DIMENSIONS Model H2-ID1 B C A A-61.31" (1557mm) OPENING G G F 6.97" (177mm) 2.00" (51mm) I/S 7.38" (187mm) 0.88" (22mm) 5" (127mm) X Y Z 6" 6" 6" (152mm) (152mm) (152mm) 8.90" (226mm) X- Inlet from tank Y- Outlet to end use Z- Domestic water inlet NOTE: Actual pipe locations may vary per project design requirements. A B C F G Weight in. mm in. mm in. mm in. mm in. mm Lbs Kg *Clearance dimensions: 48" height (120" total) x 36" length (84" total) x 36" width (for door movement 60" total)

5 PUMP DETAILS 40 GPM Submersible Pumps 60 GPM Submersible Pumps S50-15 (5 HP) Operating Range: 24-40GPM Capacities below 24 GPM see Series XQ/XQE Rainsets S75-13 (7.5 HP) Operating Range: 40-65GPM Capacities below 40 GPM see Series H2-40 Rainsets HEAD (FEET) S50-12 (5 HP) 40S30-9 (3 HP) 40S20-7 (2 HP) HEAD (FEET) S50-9 (5 HP) 60S50-7 (5 HP) 60S30-5 (3 HP) S15-5 (1.5 HP) 40S10-3 (1 HP) S20-4 (2 HP) CAPACITY (GPM) CAPACITY (GPM) 40 GPM 60 GPM Model HP Voltage Phase Complete Pump Pump End Pump Motor FLA* 40S S S S S S S S S S S S S S S S Model HP Voltage Phase Complete Pump Pump End Pump Motor FLA* 60S S S S S S S S S S S S S S *Pump motor only FLA *Pump motor only FLA

6 PUMP DETAILS 80 GPM Submersible Pumps S75-12 (7.5 HP) Operating Range: 60-80GPM Capacities below 60 GPM see Series H2-60 Rainsets HEAD (FEET) S50-8 (5 HP) 75S30-5 (3 HP) S20-3 (2 HP) CAPACITY (GPM) 80 GPM Model HP Voltage Phase Complete Pump Pump End Pump Motor FLA* 75S S S S S S S S S S S *Pump motor only FLA A Watts Water Technologies Company ES-BR-H2-ID USA: Tel: (800) Fax: (704) Canada: Tel: (905) Fax: (905) BRAE