SUITABLE FOR. Wasserdampf. Steam EXAMPLES OF USE APPROVALS. Requirements PED 2014/68/EU. Classification society
|
|
|
- Sarah Atkins
- 5 years ago
- Views:
Transcription
1 Overflow and pressure control valves Series Overflow and pressure control valves made of gunmetal, angle-type with threaded connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral Wasserdampf Steam EXAMPLES OF USE For the protection of: -- pumps against overloading in closed circuits for neutral / non-neutral, non-sticking liquids For the control of: -- systems under pressure for neutral/ non-neutral gases and vapours and depending on the sealing material also for steam pump protection test rig construction process equipment construction shipbuilding industry and marine equipment de-icing technology mechanical engineering industrial applications APPROVALS MATERIAL European Pressure Equipment Directive TR ZU 032/ TR ZU 010/2011 Requirements SPECIFICATION PED 2014/68/EU Classification society 3/ C to C depending on version 0,2 20 VGL Lloyd s Register EMEA American Bureau of Shipping Bureau Veritas Russian Maritime Register of Shipping VGL LR EMEA ABS BV RS MATERIALS Component Material DIN EN ASME Inlet body Gunmetal CC499K CC499K Outlet body Gunmetal CC499K CC499K Internal parts Brass / Gunmetal CW617N / CC499K CW617N / CC499K Spring Stainless steel
2 Series 618 t VALVE VERSION gastight version of spring housing for neutral and non-neutral media, not counter pressure compensated. The environment is protected from being affected by the medium. GF MEDIUM gaseous and liquid Air, vapours, gases, liquids and - depending on safety valve version and seal - also for steam TYPE OF LIFTING MECHANISM O without lifting device, standard for gastight versions AVAILABLE NOMINAL DIAMETERS AND CONNECTION SIZES Inlet 3/8 (10) 1/2 (15) 3/4 (20) 1 (25) 1 1/4 (32) 1 1/2 (40) 2 (50) 3/8 (10) 1/2 (15) 3/4 (20) 1 (25) 1 1/4 (32) 1 1/2 (40) 2 (50) Outlet TYPE OF CONNECTION INLET / OUTLET THREADED CONNECTIONS f / f Standard Female thread BSP-P / Female thread BSP-P DIN EN ISO / DIN EN ISO SEALS NBR Nitrile rubber Elastomere flat seal up to C to +130 C FKM Fluorocarbon Elastomere flat seal up to C to +200 C PTFE Polytetrafluoroethylene Flat seal 0, C to +225 C PTFE Polytetrafluoroethylene Flat seal C to +225 C
3 NOMINAL DIAMETERS, CONNECTIONS, INSTALLATION DIMENSIONS Series 618: Connection, installation dimensions, ranges of adjustment Connection DIN EN ISO 228 G 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 1 1/4" (32) 1 1/2" (40) 2" (50) Outlet DIN EN ISO 228 G 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 1 1/4" (32) 1 1/2" (40) 2" (50) Installation dimensions in mm L H h SW do Weight kg 0,3 0,4 0,7 1,2 1,9 2,5 3,8 Set pressure 0,2-20 0,2-20 0,2-20 0,2-20 0,2-20 0,2-20 0,2-20 Range of adjustment 0,2-0,8 0,2-0,8 0,2-0,8 0,2-0,8 0,2-0,8 0,2-0,8 0,2-0,8 0,5-2,5 0,5-2,5 0,5-2,5 0,5-2,5 0,5-2,5 0,5-2,5 0,5-2,5 MAIN DIMENSIONS, INSTALLATION DIMENSIONS
4 Series 618 INDIVIDUAL SELECTION / VALVE CONFIGURATION Series Valve version Medium Lifting device Nominal diameter Connection type Connection size Seal OptionsPressure range / set Inlet Outlet Inlet Outlet pressure Quantity 618 t GF O 15 f f NBR t GF O 25 f f PTFE 8, t GF O f f 618 t GF O f f PROPERTIES GOX Especially for gaseous O2 applications by employment of specific materials including oil- and grease free production process P03 Galvanically nickel-plated finish P01 Oil- and grease-free production P04 Chrome-plated finish P02 Chemically nickel-plated finish CERTIFICATES / APPROVALS C01 Factory certificate acc. DIN EN (WKZ 2.2) C06 ATEX evaluation acc. to 2014/34/EU C02-1 Test certificate acc. DIN EN (WPZ 3.1) for non TÜV-CE valves marking of individual serial number is required C10 Certificate of oil- and grease free production C03 Material test certificate acc. DIN EN (MPZ 3.1) (pressure retaining part) C11 Certification of the production process especially for gaseous oxygen applications by employment of specific materials C05 Sealing material Manufacturer certification (FDA, USP 3, 3-A, ), Please indicate description of certificate: ADMISSIONS / ACCREDITATIONS AA1 EC Type examination acc. to Directive 2014/68/EU AK1 V-GL (VGL) type approval AA4 EAC - certificate/declaration with passport for the valve and laser marking of the valve AK2 Lloyd s Register (LR) type approval AK3 American Bureau of Shipping (ABS) type approval AK4 Bureau Veritas (BV) type approval AK5 Russian Maritime Register of Shipping (RMRS) type approval AK6 Registro Italiano Navale (RINA) type approval AL Individual inspection by notified body inspector (body to be indicated): ENQUIRY Copy and send to: order@goetze-armaturen.de. Order form easily to be found online under the section for each series.
5 CAPACITY TABLE Series 618: Kv values at 1 overpressure ,2 49 1,6 38 0, * 1,7 0, * 0, * 1,7 0, * 1,0 49* 0,4 37* 1,5 50* 0,4 39* 2,0 54* 13* 0,5 0,4 41* 10* 2,5 56* 11* 0,5 0,4 43* 8,5* 3,0 8* 0,4 6,2* 4,0 7* 0,4 5,4* 5,0 4* 0,4 3,1* 6,0 3* 0,4 2,3 7,0 < 1 0,5 < 1 8,0 < 1 0,4 < 1 9,0 < 1 0,4 < 1 10,0 < 1 0,4 < 1 11,0 < 1 0,3 < 1 12,0 < 1 < 1 0,3 0,2 < 1 < 1 13,0 < 1 0,2 < 1 14,0 < 1 0,2 < 1 15,0 < 1 0,1 < 1 16,0 < 1 0,1 < 1 17,0 < 1 0,1 < 1 *Capacity at 2 overpressure 18,0 < 1 0,1 < 1 19,0 < 1 0,1 < 1 20,0 < 1 0,1 < 1 Kv values at 1 overpressure ,2 85 2,7 68 0, ,9 1, , ,0 1, ,0 64 1,7 42 1,5 66 1,8 49 2, * 1,8 0, * 2, * 1,9 0, * 3,0 73* 0,8 57* 4,0 75* 0,8 58* 5,0 78* 0,8 60* 6,0 79* 0,7 60* 7,0 80* 0,6 61* 8,0 84* 0,5 64* 9,0 86* 0,4 65* 10,0 89* 0,2 67* 11,0 92* 0,2 69* 12,0 95* < 1 0,1 0,2 72* < 1 13,0 < 1 0,2 < 1 14,0 < 1 0,2 < 1 15,0 < 1 0,2 < 1 16,0 5* 0,2 9* 17,0 12* 0,2 12* 18,0 38* 0,2 15* 19,0 51* 0,2 16* 20,0 65* 0,2 16* *Capacity at 2 overpressure
6 CAPACITY TABLE Series 618: Kv values at 1 overpressure , ,6 98 0, ,8 2, , ,1 2, , ,1 81 1, ,2 89 2, ,3 2, , ,5 2, ,0 91 2,1 67 4,0 98 2,1 80 5, ,1 83 6, ,2 94 7, ,2 93 8, ,0 88 9, , , , , , , * 1,2 1, * 13,0 82* 0,8 62* 14,0 97* 0,7 73* 15,0 111* 0,5 83* 16,0 125* 0,4 94* 17,0 132* 0,3 99* 18,0 148* 0,2 111* 19,0 169* 0,2 126* 20,0 180* 0,1 134* *Capacity at 2 overpressure Kv values at 1 overpressure , , , ,4 3, , ,7 3, , ,3 94 1, , , ,8 2, , ,1 2, , ,7 90 4, ,8 93 5, , , , , , , , , , , , , , , * 1,7 0, * 13,0 128* 0,6 96* 14,0 139* 0,5 104* 15,0 151* 0,5 113* 16,0 162* 0,5 121* 17,0 169* 0,5 126* 18,0 186* 0,4 139* 19,0 197* 0,4 147* 20,0 202* 0,4 151* *Capacity at 2 overpressure
7 CAPACITY TABLE Series 618: Kv values at 1 overpressure , , , ,9 7, , ,7 7, , , , , , ,1 4, , ,8 4, , , , , , , , , , , , , , , , , , , , * 3,4 1, * 13,0 398* 1,4 299* 14,0 401* 1,4 301* 15,0 412* 1,3 309* 16,0 418* 1,2 313* 17,0 431* 1,2 323* 18,0 447* 1,1 334* 19,0 452* 1,1 338* 20,0 468* 1,0 350* *Capacity at 2 overpressure Kv values at 1 overpressure , , , ,6 11, , ,4 11, , , , , , ,9 4, , ,9 5, , , , , , , , , , , , , , , , , , , , * 6,2 3, * 13,0 427* 2,6 321* 14,0 435* 2,1 327* 15,0 445* 1,4 334* 16,0 458* 1,1 343* 17,0 487* 1,1 364* 18,0 521* 1,1 390* 19,0 561* 1,0 419* 20,0 595* 1,0 445* *Capacity at 2 overpressure
8 CAPACITY TABLE Series 618: Kv values at 1 overpressure , , , ,3 15, , ,2 15, , , , , , ,5 6, , ,5 7, , , , , , , , , , , , , , , , , , , , * 11,0 2, * 13,0 511* 3,1 385* 14,0 578* 3,3 434* 15,0 614* 3,5 460* 16,0 650* 3,7 487* 17,0 672* 3,8 503* 18,0 687* 3,9 514* 19,0 701* 3,9 524* 20,0 712* 4,0 532* *Capacity at 2 overpressure
SUITABLE FOR EXAMPLES OF USE APPROVALS. Requirements PED 2014/68/EU
Overflow and pressure control valves Series 630 6.10 630 Overflow and pressure control valves made of gunmetal, straightway form with threaded connections externally adjustable SUITABLE FOR Liquids neutral
SUITABLE FOR. Steam EXAMPLES OF USE APPROVALS. Type approval WRAS. Type approval ACS. Requirements DIN EN ISO PED 2014/68/EU TRD 421
Type test approved safety valves angle-type for industrial applications Series 642 642 Safety valves made of gunmetal, angle-type with threaded or flange connections SUITABLE FOR Liquids neutral and non-neutral
SUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases
SUITABLE FOR. Liquids. Air, gases and vapours. Steam EXAMPLES OF USE APPROVALS. Requirements AD 2000 Data sheet A2 TRD 421 DIN EN ISO
Type test approved safety valves angletype for industrial applications Series 652 3.4 652 Safety valves made of gunmetal, angletype with threaded connections SUITABLE FOR Liquids neutral Air, gases and
SUITABLE FOR. Liquids. gases and vapours. Steam EXAMPLES OF USE APPROVALS
Type test approved safety valves angle-type for industrial applications 3.2 851 Safety valves made of gunmetal, angle-type with threaded connections Series 851 SUITABLE FOR Liquids neutral and non-neutral
SUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements. AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 8 4.2 8 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and
SUITABLE FOR. Liquids. Air, gases and vapours. Steam EXAMPLES OF USE APPROVALS
Type test approved safety valves angle-type for industrial applications Series 851 3.2 851 Safety valves made of gunmetal, angle-type with threaded connections SUITABLE FOR Liquids neutral and non-neutral
SUITABLE FOR EXAMPLES OF USE APPROVALS. TS EC type examination. Requirements AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 412 4.3 412 Safety valves made of stainless steel, atmospheric discharge, with threaded connections SUITABLE FOR
SUITABLE FOR. Warm water EXAMPLES OF USE APPROVALS. Type approval ACS. Type approval WRAS (up to 85 C)
Pressure reducing valves Series 681 9.2 681 Pressure reducing valves made of gunmetal with threaded connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
SUITABLE FOR. Warm water EXAMPLES OF USE. Type approval ACS. Type approval WRAS (up to 85 C) Requirements. DIN DVGW guidelines DIN EN 1567 DIN 1988
Pressure reducing valves Series 682 9.4 682 Pressure reducing valves made of gunmetal with flange connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
SUITABLE FOR. Liquids. gases and vapours. Steam EXAMPLES OF USE. Requirements. AD 2000 Data sheet A2 TRD 421 TRB 801 No. 22 and No.
Type test approved safety valves angle-type for industrial applications 3.5 420 Safety valves made of stainless steel, angle-type with threaded connections Series 420 SUITABLE FOR Liquids neutral and non-neutral
SUITABLE FOR. Warm water EXAMPLES OF USE APPROVALS. Type approval ACS. Type approval WRAS (up to 85 C)
Pressure reducing valves Series 482 9.3 482 Pressure reducing valves made of stainless steel with flange connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
SUITABLE FOR. Steam EXAMPLES OF USE APPROVALS. SPECIFICATION Classification society
Overflow and pressure control valves Series 417 6.1 417 Overflow and pressure control valves made of stainless steel, angletype with threaded connections externally adjustable SUITABLE FOR Liquids neutral
Series 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours
TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours
Pressure transmitter for marine applications MBS 3100 and MBS 3150
Data sheet Pressure transmitter for marine applications MBS 3100 and MBS 3150 The compact ship approved pressure transmitters MBS 3100 and MBS 3150 are designed for use in almost all marine applications.
Heavy duty pressure switch MBC 5000 and MBC 5100
Data sheet Heavy duty pressure switch MBC 5000 and MBC 5100 MBC pressure switches are used in industrial and marine applications where space and reliability are the most important features. MBCs are compact
Pressure transmitter for marine applications Type MBS 5100 and MBS 5150
Data sheet Pressure transmitter for marine applications Type MBS 5100 and MBS 5150 The ship approved high accuracy block pressure transmitter is designed for use in almost all marine applications. MBS
Compact. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 462 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Type. 437 Safety Relief Valves spring loaded
Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order
Temperature Sensors Types MBT 5250, MBT 5260 and MBT 5252
MAKING MODERN LIVING POSSIBLE Data sheet Temperature Sensors Types MBT 5250, MBT 5260 and MBT 5252 MBT 5250 MBT 5260 MBT 5252 Heavy-duty temperature sensors for controlling cooling water, lubrication oil,
Type 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
Pressure Control, Differential Pressure Control, Type RT
MAKING MODERN LIVING POSSIBLE Data sheet Control, Control, Type RT An RT control contains a operated single-pole changeover contact, the position of which depends on the in the inlet connection and the
Pressure transmitter for marine applications MBS 33M
Data sheet Pressure transmitter for marine applications MBS 33M The standard pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement,
Pressure switch and Thermostat Type CAS
MAKING MODERN LIVING POSSIBLE Data sheet Pressure switch and Thermostat CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 438 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring
Pressure and temperature controls, Type CAS
MAKING MODERN LIVING POSSIBLE Pressure and temperature controls, Type CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special
Modulate CATALOG. Action. Safety Relief Valves Series 433. The-Safety-Valve.com
Modulate Action Safety Relief Valves Series 433 CATALOG The-Safety-Valve.com Valve finder General How to find the right Product Group High operating to set pressure ratio, high backpressure or low total
Chibro Press Fit Stainless Steel Pipe and Fittings. Data Sheet
Chibro Press Fit Stainless Steel Pipe and Fittings General Information Data Sheet The Chibro Press Fit Pipe system permits the installation of a metal piping system in a reliable and economic way. The
Baglioni Group includes seven companies located in Europe, USA, and China.
Company The companies of Baglioni Spa manufacture carbon-and stainless-steel pressure equipment used for storage and processing in the compressed-air, oil & gas, cryogenics, air-treatment and oil/sludge
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
ALBRECHT-AUTOMATIK GMBH
Albrecht-Automatik Production Program Albrecht-Automatik valves are manufactured according to the Guidelines of the European Parliament. The design, dimensions, weights and materials of the described valves
Level switch brochure
Level switch brochure Application examples 2 Alarm, measurement and control with Trimod Besta Switch-, flange- and float modules are selected acc. to the process parameters and the desired functions. This
MS General Information Extended Product Type: MS
MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual
Three-phase motors for marine use
Three-phase motors for marine use Contents Product description 11/2 Overview of technical data 11/7 Series K.../W4.. for Premium Efficiency IE3 11/8 Series K.../WE.. for High Efficiency IE2 11/12 Series
Fig Page 2. Fig Page 6. Fig Page 10. Fig Page 14. Fig Page 16
SAFE Safety valves ARI-SAFE - Full lift- / Standard - safety valve ARI-SAFE Full lift safety valve D/G Standard safety valve F Type-test approved acc. to TRD and AD-A2 Direct loaded with spring: TÜV SV..
Data sheet Pressure controls and thermostats type CAS August 2000 DKACT.PD.P10.B B0616
Data sheet Pressure controls and thermostats type CAS August 2000 DKACT.PD.P10.B2.02 520B0616 Pressure controls, type CAS Range Further 0 10 20 30 40 50 60 bar p e Type information bar page Standard pressure
2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
Pneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
Marine Annex covering all VLT Drives Note
Marine Annex covering all VLT Drives Note Document ID: 00735874 Rev., Sequence: A,1 Project/ Activity: File Origin Date: File Last Modified Creator: P400 - Platform 2017-03-28 2017-03-28 Jacobsen, Carsten
Bearing temperature sensor Type MBT 5310
MAKING MODERN LIVING POSSIBLE Data sheet Bearing temperature sensor Type MBT 5310 The MBT 5310 temperature sensor series is specially designed for measuring the temperature in bearings where there is a
Marine product guide. Engines and generator sets
Marine product guide Engines and generator sets Marine product guide Engines and generator sets Contents Introduction 2 Rating definitions 4 Fuel consumption method 6 Engine model name explanation 7 Propulsion
Compact. Compact Performance CATALOG. LESER worldwide. Performance. Safety Relief Valves Series 437 Series 459
André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch Hong Kong LESER Shenzen, China sales@leserchina.com LESER UK Bristol, United Kingdom sales@leser.co.uk Compact Performance LESER worldwide LESER
Temperature controls, Type RT
MAKING MODERN LIVING POSSIBLE Technical brochure Temperature controls, Type RT RT temperature controls incorporate a temperature controlled, single-pole changeover switch where the contact position depends
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Product Range LESER Safety Valves for every industrial application Compact Performance High Performance Series
MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories
Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10
Technical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
Compact. performance. Threaded Safety Relief Valves. Series 437 Type Series 459 Type CATALOG.
Compact performance Threaded Safety Relief Valves Series 437 Type 437 438 439 Series 459 Type 459 46 CATALOG The Safety Valve Series 459 Packed lever H4 Series 459 Balanced bellows design Series 459 Cap
Exhaust gas temperature sensors MBT 5113 and MBT 5116
Data sheet Exhaust gas temperature sensors MBT 5113 and MBT 5116 Heavy-duty sensors used for measuring exhaust gas from diesel engines, turbines and compressors within stationary and marine applications.
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
Pressostats and thermostats CAS
MAKING MODERN LIVING POSSIBLE Technical brochure Pressostats and thermostats CAS www.danfoss.com Description CAS units are pressure-controlled switches. The position of the contacts depends on the pressure
Proportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function 2/2 NC Proportional direct-acting Armature pressure tight up to 16 bar static pressure Short correction times High
Proportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function / NC Proportional direct-acting Armature space pressure tight up to 16 bar static pressure High linearity Quick response
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
Guascor MARINE DIESEL
Guascor MARINE DIESEL ENGINES AND SYSTEMS 1. POWER DEFINITION Dresser-Rand s Guascor diesel engines ratings stated in this document are based in ISO3046-1:2002(E), ISO3046-3:2006(E), ISO15550:2002(E).
Guascor MARINE DIESEL
Guascor MARINE DIESEL ENGINES AND SYSTEMS 1. POWER DEFINITION Dresser-Rand s Guascor diesel engines ratings stated in this document are based in ISO3046-1:2002(E), ISO3046-3:2006(E), ISO15550:2002(E).
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
Angle seat valve VZXF, NPT
Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In
Spring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
INDUSTRIAL CONTROL INSTRUMENTS FOR PROCESS AUTOMATION
REFRIGERATION AND AIR CONDITIONING Pressure controls, differential controls Type RT Contents Page Introduction...................................................................................... 3 Features..........................................................................................
Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and
Pressure Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models 990.22, 990.52 and 990.53 WIKA data sheet DS 99.41 for further approvals see page 7 Applications Sanitary applications
High CATALOG 1. Performance. Flanged Safety Relief Valves Series 441 Series XXL Series 444. The-Safety-Valve.com
High Performance Flanged Safety Relief Valves Series 441 Series XXL Series 444 CATALOG 1 The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application High Performance
Estonia. Website. Contact points Flag State. EU Member State. Port State
EU Member State Website Contact points Flag State Port State http://www.vta.ee Maritime Safety Division Lume 9 Tallinn 10416 Tel: +372 6205 700 Fax: +372 6205 706 E-mail: mot@vta.ee Maritime Safety Division
Marine product guide. Engines and generator sets
Marine product guide Engines and generator sets Marine product guide Engines and generator sets Contents Introduction 2 Rating definitions 4 Fuel consumption method 6 Engine model name explanation 7 Propulsion
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
Magnetic Float Switches horizontal 1003-h
Magnetic Float Switches horizontal 1003-h Table of contents Index Table of contents 82 Description and function 83 Certificates / Approvals 84-85 Magnetic Float Switch horizontally mounted 1003-h Stainless
2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
BUTTERFLY VALVES SERIES S93-S94
BUTTERFLY VALVES SERIES S93-S94 ALFA VALVES - SERIES S93-S94 DOUBLE FLANGE - SERIES S48 Alfa Europe B.V. was founded in 2001 in the Netherlands designing and manufacturer high quality butterfly valves
Number Dimens. Min. Max. C max A max D max H max Pressure Sleeve OD mm. OD mm. OD mm. mm. mm. mm. mm. Bar * mat.
Straub pipe couplings Norma pipe couplings Pipe repair couplings Pipe connection couplings Pipe repair coupling NormaConnect REP E W5 Non-resistant repair coupling for damaged metal and plastic pipes.
Direct-acting 2/2- or 3/2-way pivoted armature valve
0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil
Features PNEUMAT IC VALVES. Pneumatic valves Vip - Pneumatic coaxial valve GENERAL FEATURES CONTROL MEDIA OPERATING MEDIA
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Pressure controls, differential pressure controls Type RT REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Pressure controls, differential controls Type RT REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical data Pressure controls, differential controls, type RT Contents Page Introduction......................................................................................
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Visual Level Indicators (VLI) Economy Line 6
Visual Level Indicators (VLI) -1- Series Type Material Pipe Viscosity Operating Operating Page O.D. x s (mm) Pressure Temperature 34000E-A 316/316L 33.7*2.0 < 150 cst max. 6bar @ 20 C -40 100 C 2 34000E-K
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 Stainless steel body Type 6027 Compact can be combined with Direct-acting, normally closed Brass and stainless steel body Electrical connection cable plug
High CATALOG 1. Performance. Flanged Safety Relief Valves Series 441 Series XXL Series 444
High Performance Flanged Safety Relief Valves Series 441 Series XXL Series 444 CATALOG 1 Product Range LESER Safety Valves for every industrial application High Performance Compact Performance Series 441
Fig Page 2. Fig Page 10. Fig Page 14. Fig Page 16. Fig Page 20
SAFE Safety valves ARI-SAFE - Full lift- / Standard - safety valve ARI-SAFE Full lift safety valve D/G Standard safety valve F Type-test approved acc. to TRD and AD2000-A2 Direct loaded with spring: TÜV
World Wide Metric. Tubing
World Wide Metric Tubing Table of Contents Metric Stainless Steel Tubing 1 Metric Carbon Steel Tubing 2 Metric CrVI-Free Plated Tubing 3 SAE CrVI-Free Plated Tubing 4 Copper Tubing 5 Copper Nickel Tubing
DN 1/4" to 2" Threaded Female BSP -10 C C Max Pressure : Bars Specifications : Reduced bore High pressure Hydraulic type
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2" Threaded Female BSP -10 C + 100 C Max Pressure : 315 500 Bars Specifications : Reduced bore High pressure Hydraulic type Materials : Galvanized
with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets
with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page
SVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
MARINE OFFSHORE. VELLES GROUP Sp. z o.o. tel
DNV Det Norske Veritas Cert. n. CERT-04193-99-AQ IND-SINCERT EN 13765:2010, approved from CEN Directive 97/23/CE PED with operating Procedures certified from DNV - CE PED 07.0056.06/2585 Directive 94/9/CE
Pneumatically operated zero dead volume T-Valve CLASSIC
Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular
GEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
High CATALOG 2. Performance. Flanged Safety Relief Valves Series 441 Full nozzle Series 458
High Performance Flanged Safety Relief Valves Series 441 Full nozzle Series 458 CATALOG 2 NH 3 HCL Product Range LESER Safety Valves for every industrial application High Performance Compact Performance
2-position electric actuators with Ball valves VBZ ½...11/4
4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230
Safety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
High Flow Safety Valves
High Flow Safety Valves Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards High Flow Safety Valves Valve summary Si 6301 Size DN 20 to DN 150 Set Pressure up to16 bar
EU Member State.
EU Member State Website Contact points Flag State http://www.mcw.gov.cy Ministry of Communication and Works Department of Merchant Shipping (DMS), Head Office Kyllinis Street, Mesa Geitonia CY- 4007 Limassol
Pressure Measurement
Siemens AG 202 /2 Product overview Transmitters for basic requirements /5 SITRANS P200 for gauge and absolute pressure / SITRANS P20 for gauge pressure /6 SITRANS P220 for gauge pressure /22 SITRANS P250
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
Modulate CATALOG. LESER worldwide. Action. Safety Relief Valves Series 433 Series 429. Modulate Action. The-Safety-Valve.com. The-Safety-Valve.
LESER UK Bristol, United Kingdom sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Bejing, Shanghai and
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
XMLB300D2C11 pressure switch XMLB 300 bar - adjustable scale 2 thresholds - 1 C/O
Characteristics pressure switch XMLB 300 bar - adjustable scale 2 thresholds - 1 C/O Complementary Possible differential minimum at low setting Possible differential minimum at high setting Maximum permissible
Si Engineering GREAT Solutions. Process and steam safety valves to PED and DIN/EN standards
Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 4302 Features Engineered with high discharge The state-of-the-art IMI Bopp & Reuther medium-pressure safety valve: