Industrial-process. centrifugal pumps.

Size: px

Start display at page:

Download "Industrial-process. centrifugal pumps."

Matthew Singleton
5 years ago
Views:

1 R Industrial-process centrifugal pumps

CDR pumps - Innovative thinking general R CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s with the manufacture of cast-iron pumps for all types

In the 70s, a developing market demanded new and increasingly-sophisticated materials and CDR Pompe began manufacturing stainless-steel and special-alloy pumps.

2 CDR pumps - Innovative thinking general R CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s with the manufacture of cast-iron pumps for all types of domestic, agricultural and industrial use. In the 70s, a developing market demanded new and increasingly-sophisticated materials and CDR Pompe began manufacturing stainless-steel and special-alloy pumps. The next stage was the manufacture of new horizontal centrifugal pumps for the chemical sector complying with standard DIN (now known as EN 22858) witnessed a significant technical breakthrough: the advent of thermoplastic and metal magnetic drive pumps. This new range of products has allowed CDR to grow on both domestic and international markets and helped establish a solid reputation as a specialist manufacturer of centrifugal pumps for chemical, pharmaceutical and petrochemical applications. Ongoing research and technical development of innovative solutions is still the driving force behind our organisation. CDR currently offers a wide range of thermoplastic and steel pumps with both magnetic drive and standard mechanical seal. Worldwide distribution The international distribution network has steadily grown since the 80s. CDR quality The CDR pump is used to process hazardous liquids. The aim is to offer the safest and most environmentally-friendly solution for handling these fluids. Most CDR products meet the requirements of ATEX Directive 94/9/EC, group II/category 2G for use in potentially explosive atmospheres. All CDR pumps have CE marking and are supplied with comprehensive maintenance manual. The workings of CDR magnetic drive pumps The outer magnetic core connected to the drive shaft transmits torque to the inner magnetic core/impeller unit; the magnetic field established produces rotation without physical contact. The isolation shell is situated between the two cores and hermetically separates the pumped liquid from the atmosphere. CDR magnetic coupling Available in different materials, magnets are designed to process high-temperature and high-density liquids. 2

Biofuels Handling biodiesel and the by-products of processed vegetable oils.

3 Applications Fields of use Chemical storage Loading and unloading a range of hazardous and non-hazardous chemicals inside tank farms. Galvanising Filling, emptying, circulation and regeneration of acid baths used for coating metals (sulphuric and hydrochloric acid, caustic soda, chlorides). Biofuels Handling biodiesel and the by-products of processed vegetable oils. Chemical and pharmaceutical industry Handling of chemicals such as acids, bases, alkalis, solvents and hydrocarbons normally used in chemical and pharmaceutical processes. general Food industry Unloading tankers and feeding chemicals used to disinfect production lines (nitric and hydrochloric acid, sodium hypochlorite, caustic soda). Water and air treatment and purification Handling of reagents used in physicochemical purification plants. Regeneration of ion-exchange resins used to produce demineralised water. Fume scrubbing and odour-control towers (hydrochloric and sulphuric acid, iron chloride, hydrogen peroxide, sodium hypochlorite, caustic soda). Petrochemical industry Handling of the most common organic and inorganic chemicals used as service fluids. Paper industry Filling, draining and circulation of chemicals used during paper bleaching (hydrochloric and acetic acid, aluminium sulphate, sodium hypochlorite, caustic soda). Textiles Filling, draining and circulation of chemicals used during finishing operations such as bleaching, mercerising and dyeing (hydrochloric acid, sodium hypochlorite, caustic soda, special colouring agents). Tanning industry Handling of chemicals most commonly used in the various stages of the tanning process (acetic, sulphuric and hydrochloric acid, caustic soda, copper sulphate solution). Our product range Plastic pumps STN4/6/10 pag.4 HTN pag.14 STN30/40 pag.6 UCN-BL pag.16 ETN pag.8 UCN-L pag.18 UTN-BL pag.10 CCN pag.20 UTN-L pag.12 CVN pag.34 Metal pumps 1. Magnetic rotor coupled with motor 2. Isolation shell separating liquid from atmosphere 3. Impeller assembly driven by the magnetic rotor ETS UTS-B UTS pag.22 pag.24 pag.26 HTS UCS-B UCS pag.28 pag.30 pag.32 info@cdrpompe.com 3

Magnetic drive centrifugal pumps STN4/6/10 series Close-coupled single-stage pumps designed

liquids. Particularly suitable for builders of small systems and OEM users.

as PP and PVDF. Magnetic drive designed to process hightemperature and high-density liquids.

Electric motors max 13 m 0,12Kw (gr.56) a 0,55Kw (gr.

4 Magnetic drive centrifugal pumps STN4/6/10 series Close-coupled single-stage pumps designed for installation in confined spaces and ideal for transferring corrosive, flammable and toxic liquids. Particularly suitable for builders of small systems and OEM users. Exceptional corrosion resistance obtained by injection moulding of thermoplastic resins such as PP and PVDF. Magnetic drive designed to process hightemperature and high-density liquids Pump casing 2. Inner magnetic core/ impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bearing 6. Rotary bushing 6 Technical specifications Materials PP-GF/PVDF Flow rate max 10 m 3 /h Head Electric motors max 13 m 0,12Kw (gr.56) a 0,55Kw (gr.71) Temperature range from 0 C to 80 C Allowable pressure rating max PN 4 at 20 C Viscosity Allowable solids max 200 cst Max. concentration 2% by weight, max. hardness 800 Vk, max. particle size 150 µm 4 4

5 Q=10 m 3 /h - H=13 m kw PP - PVDF plastic Dimensions A G B C R Q STN4/6/10 series nf ne H np M N S L T A B C ØE ØF G H L STN ¾ Gas ¾ Gas STN Gas 1 Gas 279 STN Gas 1 Gas M N ØP Q R S T STN STN STN Performance STN H m Q m 3 /h info@cdrpompe.com

Magnetic drive centrifugal pumps STN30/40 series Close-coupled single-stage pumps complying with the ATEX Directive,

Designed for installation in confined spaces and ideal for transferring corrosive, flammable and toxic liquids.

Exceptional corrosion resistance obtained by injection moulding of thermoplastic resins such as PP, ETFE and ETFE-FC.

coupled with rotary bushings with low coefficient of friction.

Technical specifications Materials Flow rate max 24 m 3 /h Head PP-GF (polypropylene+glass), ETFE-FC max 24 m Electric

6 Magnetic drive centrifugal pumps STN30/40 series Close-coupled single-stage pumps complying with the ATEX Directive, category II2G (version ETFE-FC only). Designed for installation in confined spaces and ideal for transferring corrosive, flammable and toxic liquids. Particularly suitable for builders of small systems and OEM users. Exceptional corrosion resistance obtained by injection moulding of thermoplastic resins such as PP, ETFE and ETFE-FC. Possibility of dry operation for short periods provided by the magnetic balancing system for the internal rotor (FTC ) coupled with rotary bushings with low coefficient of friction. Magnetic drive designed to process hightemperature and high-density liquids. Extensive interchangeability of components. Technical specifications Materials Flow rate max 24 m 3 /h Head PP-GF (polypropylene+glass), ETFE-FC max 24 m Electric motors 0,75 (gr.80) 4Kw (gr.112) 1. Pump casing 2. Impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bearing 6. Shaft 7. Rotary bushing Temperature range from 0 C to 80 C Allowable pressure rating max PN 6 Viscosity Allowable solids max 400 cst Max. concentration 2% by weight, max. hardness 800 Vk, max. particle size 150 µm 6 6

dimensions L2 external external thread thread build type TEFC Eex STN 30 Ø40 Ø20 G 2" G 1" 60 370 80 B5 Mot. 80-223 Mot.

80-223 Mot. 80-290 STN 40 Ø50 Ø32 G 2" 3/4 G 1" 1/2 67 377 90 B5 Mot. 90-256 Mot.

TEFC Eex STN 30 Ø40 Ø20 G 2" G 1" 60 63 100 436 173 160 200 100 B3/B14 Mot. 100-308 Mot.

7 Q=24 m 3 /h - H=24 m kw PP - ETFE plastic Dimensions STN30/40 series Type of pump DNa DNm da dm a L Motor size Motor dimensions L2 Motor dimensions L2 external external thread thread build type TEFC Eex STN 30 Ø40 Ø20 G 2" G 1" B5 Mot Mot STN 30 Ø40 Ø20 G 2" G 1" B5 Mot Mot STN 40 Ø50 Ø32 G 2" 3/4 G 1" 1/ B5 Mot Mot STN 40 Ø50 Ø32 G 2" 3/4 G 1" 1/ B5 Mot Mot Type of pump Dna DNm da dm a b h1 L f1 m n Motor size Build Motor dimensions L2 external external type thread thread TEFC Eex STN 30 Ø40 Ø20 G 2" G 1" B3/B14 Mot Mot STN 30 Ø40 Ø20 G 2" G 1" B3/B14 Mot Mot STN 40 Ø50 Ø32 G 2" 3/4 G 1" 1/ B3/B14 Mot Mot STN 40 Ø50 Ø32 G 2" 3/4 G 1" 1/ B3/B14 Mot Mot Performance STN info@cdrpompe.com

ETN series Lined magnetic drive centrifugal pumps Close-coupled single-stage pumps complying with the ATEX

Designed for installation in confined spaces and ideal for transferring corrosive, flammable and toxic

Improved chemical resistance as a result of injection moulding of thermoplastic resins such as PP and ETFE

Possibility of dry operation for short periods provided by the magnetic balancing system for the internal

Magnetic drive designed to process hightemperature and high-density liquids.

Outer magnetic core 4. Isolation shell 5. Static bearing 6. Fixed shaft 7.

8 ETN series Lined magnetic drive centrifugal pumps Close-coupled single-stage pumps complying with the ATEX Directive, category II2G. Designed for installation in confined spaces and ideal for transferring corrosive, flammable and toxic liquids. Exceptional mechanical strength provided by the ductile-cast-iron pump casing. Improved chemical resistance as a result of injection moulding of thermoplastic resins such as PP and ETFE using proprietary ILS (Integral Lining System) technology. Possibility of dry operation for short periods provided by the magnetic balancing system for the internal rotor (FTC ) coupled with rotary bushings with low coefficient of friction. Magnetic drive designed to process hightemperature and high-density liquids. Extensive interchangeability of components. 1. Pump casing 2. Inner magnetic core/ impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bearing 6. Fixed shaft 7. Rotary bushing Technical specifications Materials PP-GF/ETFE with ILS technology Flow rate max 80 m 3 /h Head Electric motors max 34 m from 0.75 kw (gr. 80) to 7.5 kw (gr. 132) Temperature range from 0 C to 90 C Allowable pressure rating max PN 6 Viscosity Allowable solids max 400 cst Max. concentration 2% by weight, max. hardness 800 Vk, max. particle size 150 µm 8 8

Q=80 m 3 /h - H=34 m - 0.75-7.5 kw PP - ETFE plastic Dimensions ETN series Type of pump Dna DNm ETN 50 40 UNI 2223/29 PN 16 ANSI B16.

5 150 RF 40 UNI 2223/29 PN 16 80 ANSI B16.5 150 RF 50 UNI 2223/29 PN 16 100 ANSI B16.

9 Q=80 m 3 /h - H=34 m kw PP - ETFE plastic Dimensions ETN series Type of pump Dna DNm ETN UNI 2223/29 PN 16 ANSI B RF ETN UNI 2223/29 PN 16 ANSI B RF ETN UNI 2223/29 PN 16 ANSI B RF 25 UNI 2223/29 PN ANSI B RF 40 UNI 2223/29 PN ANSI B RF 50 UNI 2223/29 PN ANSI B RF a Motor motor dimensions L1 Motor size/build type f1 TEFC Eex 80 B5 175, B5 175, B5 175, B5 175, B5 193, Performance info@cdrpompe.com

UTN-BL series Lined magnetic drive centrifugal pumps Close-coupled single-stage process pumps complying with the ATEX Directive,

Designed for installation in confined spaces and ideal for any industrial sector where transfer of corrosive, toxic, sterile,

Improved chemical resistance as a result of injection moulding of thermoplastic resins such as PP and PFA using proprietary ILS

Inlet and outlet port dimensions meet the requirements of standard EN 22858.

Extensive interchangeability of components. 1. Pump casing 2. Inner magnetic core/ impeller unit 3. Outer magnetic core 4.

10 UTN-BL series Lined magnetic drive centrifugal pumps Close-coupled single-stage process pumps complying with the ATEX Directive, category II2G. Designed for installation in confined spaces and ideal for any industrial sector where transfer of corrosive, toxic, sterile, radioactive and flammable liquids is necessary. Improved chemical resistance as a result of injection moulding of thermoplastic resins such as PP and PFA using proprietary ILS (Integral Lining System) technology. Exceptional mechanical strength provided by the ductile-cast-iron pump casing. Inlet and outlet port dimensions meet the requirements of standard EN Mechanical strength and magnetic drive designed to process high-pressure, -density and -temperature liquids (120 C in PFA). Extensive interchangeability of components. 1. Pump casing 2. Inner magnetic core/ impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bearing 6. Fixed shaft 7. Rotary bushing Technical specifications Materials PP / PFA with ILS technology Flow rate max 80 m 3 /h Head max 65 m Electric motors from 0.75 kw to 18.5 kw from 0 C to 120 C Temperature range from 120 to 140 C please contact the CDR sales department Allowable pressure rating Viscosity Allowable solids max 20 bar max 400 cst Max. concentration 2% by weight, max. hardness 800 Vk, max. particle size 150 µm

40-25-160 40 25 80 180 160 UTN-BL 50-32-160 50 32 80 180 160 UTN-BL 50-32-200 50 32 80 208 180 UTN-BL 65-40-160 65 40 80 180 160 UTN-BL

11 Q=80 m 3 /h - H=65 m kw PP - PFA plastic Dimensions UTN-BL series Type of pump Dna Suction flange through holes for: UNI 2223/29 PN16 ANSI B16,5 150 RF UTN-BL UTN-BL UTN-BL UTN-BL UTN-BL UTN-BL * 160 UTN-BL DNm Discharge flange through holes for: UNI 2223/29 PN16 ANSI B16,5 150 RF *For UTN-BL with motor size 160 H=208 A H H2 Performance info@cdrpompe.com 11 11

UTN-L series Lined magnetic drive centrifugal pumps Single-stage process pumps with back pullout system installed on a

Suitable for demanding applications and ideal for any industrial sector where transfer of corrosive, toxic, sterile,

Exceptional mechanical strength provided by the ductile-cast-iron pump casing.

ILS (Integral Lining System) technology.

12 UTN-L series Lined magnetic drive centrifugal pumps Single-stage process pumps with back pullout system installed on a baseplate with separate coupling and motor and complying with the ATEX Directive, category II2G. Suitable for demanding applications and ideal for any industrial sector where transfer of corrosive, toxic, sterile, radioactive and flammable liquids is necessary. Exceptional mechanical strength provided by the ductile-cast-iron pump casing. Improved chemical resistance as a result of injection moulding of thermoplastic resins such as PP and PFA using proprietary ILS (Integral Lining System) technology. Compliance with standards DIN and EN means that this type of pump is suitable for quick and simple system revamping. Mechanical strength and magnetic drive designed to process high-pressure, -density and -temperature liquids (120 C in PFA). Extensive interchangeability of components 1. Pump casing 2. Inner magnetic core/ impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bearing 6. Fixed shaft 7. Rotary bushing Technical specifications Materials PP / PFA with ILS technology Flow rate max 80 m 3 /h Head max 65 m Electric motors from 0.75 kw to 30 kw Temperature range from 0 C to 120 C (PFA) from 120 to 140 C please contact the CDR sales department Allowable pressure rating Viscosity Allowable solids max 20 bar max 400 cst Max. concentration 2% by weight, max. hardness 800 Vk, max. particle size 150 µm

13 Q=80 m 3 /h - H=65 m kw PP - PFA plastic Dimensions UTN-L series Type of pump DNa Suction flange through holes for: UNI 2223/29 PN16 ANSI B16,5 150 RF DNm Discharge flange through holes for: UNI 2223/29 PN16 ANSI B16,5 150 RF A H h2 n1 n2 UTN-L UTN-L UTN-L UTN-L UTN-L UTN-L UTN-L Performance info@cdrpompe.com 13 13

14 HTN series Magnetic-drive regenerative turbine pumps Close-coupled single-stage pumps complying with the ATEX Directive, category II2G. Ideal for low-flow and high-head applications and pumping liquids containing up to 20% gas. Used to transfer corrosive, flammable and toxic liquids. Exceptional corrosion resistance obtained by using one-piece machined thermoplastics such as PP and PVDF. Magnetic drive designed to process hightemperature and high-density liquids. Suitable for installation in confined spaces Extensive interchangeability of components. 8 Technical specifications Materials PP / PVDF Flow rate max 6 m 3 /h Head max 75 m Electric motors from 0.75 kw (gr. 80) to 5.5 kw (gr. 132) Pump casing 2. Inner magnetic core/ impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bearing 6. Fixed shaft 7. Rotary bushing 8. Impeller 5 Temperature range from -20 C to 80 C Allowable pressure rating 10 bar (20 C)/6 bar (80 C) Viscosity Allowable solids max 200 cst solids not permitted

f1 TEFC L2 ADPE L2 HTN 80 Mot.80 - B5 173 Mot.80 233 Mot.80 290 Mot.90 - B5 173 Mot.90 256 Mot.

15 Q=6 m 3 /h - H=75 m kw PP - PVDF plastic Dimensions HTN series Type of pump Motor size - Build type Motor dimensions f1 TEFC L2 ADPE L2 HTN 80 Mot.80 - B5 173 Mot Mot Mot.90 - B5 173 Mot Mot HTN 90 Mot B5 173 Mot Mot HTN 100 Mot B5 173 Mot Mot Mot B5 191 Mot Mot Performance info@cdrpompe.com 15 15

UCN-BL series Lined centrifugal pumps with mechanical seal Close-coupled single-stage process pumps complying with the ATEX Directive, category II2G.

crystals is necessary. Can be fitted with various types of single and double mechanical seals of the top domestic and international brands along with the standard CDR single seal with opposing faces.

Exceptional mechanical strength provided by the ductile-cast-iron pump casing. Direct connection to the motor provides savings.

16 UCN-BL series Lined centrifugal pumps with mechanical seal Close-coupled single-stage process pumps complying with the ATEX Directive, category II2G. Designed for installation in confined spaces and ideal for any industrial sector where transfer of corrosive, toxic, sterile, radioactive and flammable liquids containing suspended solids and/or crystals is necessary. Can be fitted with various types of single and double mechanical seals of the top domestic and international brands along with the standard CDR single seal with opposing faces. 4 1 Improved chemical resistance as a result of injection moulding of thermoplastic resins such as PP and PFA using proprietary ILS (Integral Lining System) technology. Exceptional mechanical strength provided by the ductile-cast-iron pump casing. Direct connection to the motor provides savings. Inlet and outlet port dimensions meet the requirements of standard EN Mechanical strength designed to process high-pressure, -density and -temperature liquids (120 C in PFA). Extensive interchangeability of components. Technical specifications Materials PP/PFA Flow rate max 80 m 3 /h 5 1. Pump casing 2. Impeller unit 3. Merchanical seal 3 4. Seal support 5. Shaft 2 Head Electric motors Temperature range Allowable pressure rating max 65 m from 1.1 kw to 18.5 kw from -15 C to 120 C (PFA) max 20 bar

B16,5 150 RF UCN-BL 40-25-160 40 25 80 180 160 UCN-BL 50-32-160 50 32 80 180 160 UCN-BL 50-32-200 50 32 80 208 180

80-50-200 80 50 100 208 200 DNm Discharge flange Through holes for: UNI 2223/29 PN16 ANSI B16,5 150 RF *For UCN-BL

17 Q=80 m 3 /h - H=65 m kw PP - PFA plastic Dimensions UCN-BL series Type of pump Dna Suction flange Through holes for: UNI 2223/29 PN16 ANSI B16,5 150 RF UCN-BL UCN-BL UCN-BL UCN-BL UCN-BL UCN-BL * 160 UCN-BL DNm Discharge flange Through holes for: UNI 2223/29 PN16 ANSI B16,5 150 RF *For UCN-BL with motor size 160 H=208 Impeller types available A H H2 Standard closed impeller Open vortex impeller Radial impeller Performance Standard closed impeller Open vortex impeller Radial impeller info@cdrpompe.com 17 17

UCN-L series Lined centrifugal pumps with mechanical seal Single-stage process pumps with back pullout system installed on a baseplate with separate coupling and motor and complying with the ATEX

Suitable for demanding applications and ideal for any industrial sector where transfer of corrosive, toxic, sterile, radioactive and flammable liquids containing suspended solids and/or crystals is

3 4 2 1 Can be fitted with various types of single, double and cartridge mechanical seals of the top domestic and international brands along with the standard CDR single seal with opposing faces.

18 UCN-L series Lined centrifugal pumps with mechanical seal Single-stage process pumps with back pullout system installed on a baseplate with separate coupling and motor and complying with the ATEX Directive, category II2G. Suitable for demanding applications and ideal for any industrial sector where transfer of corrosive, toxic, sterile, radioactive and flammable liquids containing suspended solids and/or crystals is necessary. Exceptional mechanical strength provided by the ductile-cast-iron pump casing Can be fitted with various types of single, double and cartridge mechanical seals of the top domestic and international brands along with the standard CDR single seal with opposing faces. Improved chemical resistance as a result of injection moulding of thermoplastic resins such as PP and PFA using proprietary ILS (Integral Lining System) technology. Compliance with standards DIN and EN means that this type of pump is suitable for quick and simple system revamping. Mechanical strength designed to process high-pressure, -density and -temperature liquids (120 C in PFA). Extensive interchangeability of components Pump casing 2. Impeller unit 3. Merchanical seal 4. Seal support 5. Shaft Technical specifications Materials Flow rate Head Electric motors Temperature range Allowable pressure rating PP/PFA max 80 m3/h max 65 m (closed impeller) from 0.75 kw to 30 kw from -15 C to 120 C (PFA) max 20 bar

2223/29 PN16 ANSI B16.5 150 RF ANSI B16.

19 Q=80 m 3 /h - H=65 m kw PP - PFA plastic Dimensions UCN-L series Dna DNm Type of pump Suction flange Discharge flange Through holes for: Through holes for: a h1 h2 n1 n2 UNI 2223/29 PN16 UNI 2223/29 PN16 ANSI B RF ANSI B RF UCN-L UCN-L UCN-L UCN-L UCN-L UCN-L UCN-L Impeller types available Standard closed impeller Open vortex impeller Radial impeller Performance Standard closed impeller Open vortex impeller Radial impeller info@cdrpompe.com 19 19

CCN series Non-metallic centrifugal pumps with mechanical seal Single-stage process pumps with back pullout system installed on a baseplate with separate coupling and motor.

20 CCN series Non-metallic centrifugal pumps with mechanical seal Single-stage process pumps with back pullout system installed on a baseplate with separate coupling and motor. Suitable for demanding applications and ideal for any industrial sector where transfer of corrosive, toxic, sterile, radioactive and flammable liquids containing suspended solids and/or crystals is necessary. Can be fitted with various types of single, double and cartridge mechanical seals of the top domestic and international brands along with the standard CDR single seal with opposing faces. The metal armouring applied to components made from thermoplastic resins, such as PP and PVDF, ensures dimensional stability and mechanical strength. Compliance with standards DIN and EN means that this type of pump is suitable for quick and simple system revamping. Technical specifications Materials PP/PVDF Flow rate max 300 m 3 /h Head Electric motors Temperature range Allowable pressure rating max 100 m (closed impeller) from 0.75 kw to 45 kw from -15 C to 90 C (PVDF) max 20 bar

21 Q=300 m3/h - H=100 m kw PP - PVDF plastic CCN series Dimensions Type of pump Performance info@cdrpompe.com definitivo_cs2.indd :49:46

ETS series Magnetic drive centrifugal pumps Close-coupled single-stage pumps complying with the ATEX Directive, category II2G.

Exceptional mechanical strength provided by AISI 316L precision-cast components and standard Hastelloy-C isolation shell.

Inlet and outlet port dimensions meet the requirements of standard EN 22858 (models 50, 60 and 70 only).

maintenance costs. Mechanical strength and magnetic drive designed to process high-pressure, -density and -temperature liquids (max. 140 C).

22 ETS series Magnetic drive centrifugal pumps Close-coupled single-stage pumps complying with the ATEX Directive, category II2G. Designed for installation in confined spaces and ideal for transferring acids, bases and solvents. Exceptional mechanical strength provided by AISI 316L precision-cast components and standard Hastelloy-C isolation shell. Low cost version with single fixed siliconcarbide or graphite support. Inlet and outlet port dimensions meet the requirements of standard EN (models 50, 60 and 70 only). Hydraulic thrust control using the LSC (Linear Spring Compensation) system and optimised internal lubrication guarantee long life and low maintenance costs. Mechanical strength and magnetic drive designed to process high-pressure, -density and -temperature liquids (max. 140 C). Extensive interchangeability of components Pump casing 2. Impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bushing 6. Rotary bushing 7. Thrust bearing 8. Inner magnetic core Technical specifications Materials AISI 316L (standard) Hastelloy C (optional) Flow rate max 35 m 3 /h Head Electric motors Temperature range Allowable pressure rating Viscosity Allowable solids max 64 m from 1.1 kw (gr. 80) to 7.5 kw (gr. 132) from -30 C to 140 C For temperatures < -30 C please contact the CDR sales department from PN6 to PN24 max 450 cst Max. concentration 5% by weight, max. hardness 800 Vk, max. particle size 200 µm 22

23 Q=35 m 3 /h - H=64 m kw AISI 316 L stainless steel Dimensions ETS series Type of pump A h Da Dm L2 ETS G 1" 1/4 G 1" 334 ETS G 1" 1/2 G 1" 361 PUMP Dna DNm a b h2 L Motor size f1 L1 L1 TEFC Eex ETS /90 195,5 233/ /336 ETS / / /415 ETS /90 197,5 233/ /336 ETS / / /415 ETS , /100/ /314/ /366/415 ETS , ETS , /100/ / 314 / / 366 /415 ETS , ETS , /100/ / 314 / / 366 /415 ETS , Performance info@cdrpompe.com 23

UTS-B series Magnetic drive centrifugal pumps Close-coupled single-stage process pumps complying with the ATEX Directive, category II2G.

Exceptional mechanical strength provided by AISI 316L precision-cast components and standard Hastelloy-C isolation shell. Double fixed silicon-carbide or graphite support.

Hydraulic thrust control using the LSC (Linear Spring Compensation) system and optimised internal lubrication guarantee long life and low maintenance costs.

24 UTS-B series Magnetic drive centrifugal pumps Close-coupled single-stage process pumps complying with the ATEX Directive, category II2G. Designed for installation in confined spaces and ideal for transferring acids, bases and solvents. Exceptional mechanical strength provided by AISI 316L precision-cast components and standard Hastelloy-C isolation shell. Double fixed silicon-carbide or graphite support. Inlet and outlet port dimensions meet the requirements of standard EN Hydraulic thrust control using the LSC (Linear Spring Compensation) system and optimised internal lubrication guarantee long life and low maintenance costs. Mechanical strength and magnetic drive designed to process high-pressure, -density and -temperature liquids (max. 180 C). Extensive interchangeability of components Pump casing 2. Impeller unit 3. Outer magnetic core 4. Isolation shell 7 5. Static bushing 6. Rotary bushing 7. Thrust bearing 8. Inner magnetic core Technical specifications Materials AISI 316L (standard) Hastelloy C (optional) Flow rate max 180 m 3 /h Head Electric motors Temperature range Allowable pressure rating Viscosity Allowable solids max 100 m from 1.1 kw (gr. 80) to 18.5 kw (gr. 160) from -30 C to 180 C For temperatures < -30 C please contact the CDR sales department from PN16 to PN40 max 450 cst Max. concentration 5% by weight, max. hardness 800 Vk, max. particle size 250 µm 24

40-25-200 40 25 80 70 180 730 UTS-B 50-32-160 50 32 80 70 160 730 UTS-B 50-32-200 50 32 80 70 180 730 UTS-B 65-40-160 65 40 80

80-50-200 80 50 100 70 200 750 Motor size Build type f1 Motor dimensions L2 TEFC Eex 80 B14 266 233 290 90 B14 266 256 336 100

25 Q=180 m 3 /h - H=100 m kw AISI 316 L stainless steel Dimensions UTS-B series Type of pump DNa DNm a b h2 L UTS-B UTS-B UTS-B UTS-B UTS-B UTS-B UTS-B UTS-B UTS-B Motor size Build type f1 Motor dimensions L2 TEFC Eex 80 B B B B B B For pumps with higher rating or installation of model 160 (18.5 kw) please contact the CDR sales department for dimensions Performance info@cdrpompe.com 25

UTS series Magnetic drive centrifugal pumps Single-stage process s pumps with back pull-out Exceptional mechanical strength provided by system installed on a baseplate with separate AISI 316L

Suitable for demanding applications and ideal for any industrial sector where transfer of acids, solvents, radioactive 22858 means that this type of pump is suitable Compliance with standards DIN

Impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bushing 6. Rotary bushing 7. Thrust bearing 8.

26 UTS series Magnetic drive centrifugal pumps Single-stage process s pumps with back pull-out Exceptional mechanical strength provided by system installed on a baseplate with separate AISI 316L precision-cast components and standard Hastelloy-C isolation shell. coupling and motor and complying with the ATEX Directive, category II2G. Suitable for demanding applications and ideal for any industrial sector where transfer of acids, solvents, radioactive means that this type of pump is suitable Compliance with standards DIN and EN and flammable liquids is necessary. for quick and simple system revamping. Double fixed silicon-carbide or graphite support. Hydraulic thrust control using the LSC (Linear Spring Compensation) system and optimised internal lubrication guarantee long life and low maintenance costs. Mechanical strength and magnetic drive designed to process high-pressure, -density and -temperature liquids (max. 320 C). Extensive interchangeability of components Pump casing 2. Impeller unit 3. Outer magnetic core 4. Isolation shell 5. Static bushing 6. Rotary bushing 7. Thrust bearing 8. Inner magnetic core Technical specifications Materials AISI 316L (standard) Hastelloy C (optional) Flow rate max 320 m 3 /h Head Electric motors Temperature range Allowable pressure rating Viscosity Allowable solids max 140 m from 1.1 kw (gr. 80) to 7.5 kw (gr. 280) from -30 C to 320 C For temperatures < -30 C please contact the CDR sales department from PN16 to PN40 max 450 cst Max. concentration 5% by weight, max. hardness 800 Vk, max. particle size 250 µm 26

27 Q=320 m 3 /h - H=140 m kw AISI 316 L stainless steel Dimensions UTS series Type Pump of pump size DNa DNm a h1 h2 n1 n2 UTS UTS UTS UTS UTS UTS UTS UTS UTS For pumps with higher rating please contact the CDR sales department for dimensions Performance info@cdrpompe.com 27

28 HTS series Magnetic drive regenerative turbine pumps Close-coupled single-stage pumps complying with the ATEX Directive, category II2G. Ideal for low-flow and high-head applications and pumping liquids containing up to 20% gas. Used to transfer clean corrosive, flammable and toxic liquids containing no solids. Exceptional mechanical strength provided by AISI 316L precision-cast components and standard Hastelloy-C isolation shell Mechanical strength and magnetic drive designed to process high-pressure, -density and -temperature liquids (max. 140 C). Suitable for installation in confined spaces. Version with single fixed silicon-carbide or graphite support and inlet and outlet ports with DN 25 flange or 1 pipe thread. Hydraulic thrust control and optimised internal lubrication guarantee long life and low maintenance costs. Extensive interchangeability of components Pump casing 2. Impeller unit 3. Outer magnetic core 4. Isolation shell 7 5. Static bushing 6. Rotary bushing 7. Thrust bearing 8. Inner magnetic core Technical specifications Materials AISI 316L (standard) Hastelloy C (optional) Flow rate max 5 m 3 /h Head Electric motors max 160 mcl from 0.75 kw(gr.80) to 7.5 kw(gr.132) Temperature range from -30 C to 140 C Allowable pressure rating 24 bar Viscosity Allowable solids max 200 cst solids not permitted 28

29 Q=5 m 3 /h - H=160 m kw AISI 316 L stainless steel Dimensions HTS series Performance info@cdrpompe.com 2

UCS-B series Centrifugal pumps with mechanical seal Close-coupled single-stage process pumps complying with the ATEX

Designed for installation in confined spaces and ideal for any industrial sector where transfer of mother liquors,

Can be fitted with various types of single and cartridge mechanical seals of the top domestic and international brands.

Exceptional mechanical strength provided by AISI 316L precision-cast components and optimised internal lubrication

Extensive interchangeability of components. 3 2 1 5 4 1. Pump casing 2. impeller unit 3. Mechanical seal 4. Seal support 5.

30 UCS-B series Centrifugal pumps with mechanical seal Close-coupled single-stage process pumps complying with the ATEX Directive, category II2G. Designed for installation in confined spaces and ideal for any industrial sector where transfer of mother liquors, corrosive, toxic, sterile, radioactive and flammable liquids containing suspended solids and/or crystals is necessary. Can be fitted with various types of single and cartridge mechanical seals of the top domestic and international brands. Direct connection to the motor provides savings. Exceptional mechanical strength provided by AISI 316L precision-cast components and optimised internal lubrication guarantee long life and low maintenance costs. Inlet and outlet port dimensions meet the requirements of standard EN Extensive interchangeability of components Pump casing 2. impeller unit 3. Mechanical seal 4. Seal support 5. Shaft Technical specifications Materials Handled liquids AISI 316L (standard) Hastelloy C (optional) Head max 80 m 3 /h Flow rate Chemical, toxic or flammable liquids max 65 m Electric motors from 1.5 kw to 18.5 kw Temperature range from -30 C to 180 C Allowable pressure rating from PN10 to PN

UCS-B 50-32-160 50 32 80 180 160 UCS-B 50-32-200 50 32 80 208 180 UCS-B 65-40-160 65 40 80 180 160 UCS-B 65-40-200 65 40 100 208 180 UCS-B 80-50-125 80 50 100 180* 160 UCS-B 80-50-160 80 50

31 Q=80 m 3 /h - H=65 m kw AISI 316 L stainless steel Dimensions UCS-B series General dimensions Motor dimensions Type of pump DNa DNm A H H2 UCS-B UCS-B UCS-B UCS-B UCS-B UCS-B UCS-B * 160 UCS-B UCS-B Size - build type 90 B5 221, B B B B *For UCS-B with motor size 160 H=208 For pumps with higher rating please contact the CDR sales department for dimensions Performance f1 TEFC L2 Dimensions Eex L2 info@cdrpompe.com 31

UCS series Centrifugal pumps with mechanical seal Single-stage process pumps with back pullout system installed on a baseplate with separate coupling and motor and

Suitable for demanding applications and ideal for any industrial sector where transfer of mother liquors, corrosive, toxic, sterile, radioactive and flammable

3 2 1 Can be fitted with various types of single, double and cartridge mechanical seals of the top domestic and international brands.

Compliance with standards DIN 24256 and EN 22858 means that this type of pump is suitable for quick and simple system revamping.

32 UCS series Centrifugal pumps with mechanical seal Single-stage process pumps with back pullout system installed on a baseplate with separate coupling and motor and complying with the ATEX Directive, category II2G. Suitable for demanding applications and ideal for any industrial sector where transfer of mother liquors, corrosive, toxic, sterile, radioactive and flammable liquids containing suspended solids and/or crystals is necessary Can be fitted with various types of single, double and cartridge mechanical seals of the top domestic and international brands. Exceptional mechanical strength provided by AISI 316L precision-cast components and optimised internal lubrication guarantee long life and low maintenance costs. Compliance with standards DIN and EN means that this type of pump is suitable for quick and simple system revamping. Extensive interchangeability of components Pump casing 2. impeller unit 3. Mechanical seal 4. Seal support 5. Shaft Caratteristiche tecniche Materials AISI 316L (standard) Hastelloy C (optional) Flow rate max 80 m 3 /h Head max 65 m Electric motors from 0.75 kw to 30 kw from -30 C to 200 C Temperature range For temperatures < -30 C please contact the CDR sales department Allowable pressure rating from PN10 a PN

33 Q=80 m 3 /h - H=65 m kw AISI 316 L stainless steel Dimensions UCS series Dna DNm Type of pump Suction flange through holes for: UNI 2223/29 PN16 ANSI B RF discharge flange through holes for: UNI 2223/29 PN16 ANSI B RF a h1 h2 n1 n2 Pump weight (kg) UCS UCS UCS UCS UCS UCS UCS UCS UCS For pumps with higher rating please contact the CDR sales department for dimensions Performance info@cdrpompe.com 33

CVN series Vertical-shaft centrifugal pumps Vertical-shaft single-stage centrifugal process pumps installed on a metal baseplate, coated on the tank side, and connected to the motor by means of a

34 CVN series Vertical-shaft centrifugal pumps Vertical-shaft single-stage centrifugal process pumps installed on a metal baseplate, coated on the tank side, and connected to the motor by means of a flexible coupling. Suitable for demanding applications and ideal for any industrial sector where transfer of corrosive, toxic, sterile, radioactive and flammable liquids is necessary. Components made from thermoplastic resins, such as PP and PVDF, ensure dimensional stability and chemical resistance. Available with standard lip-seal system or upon request liquid seal to prevent the outflow of rising vapours and gases. Fitted with between one and three shaft supports, depending on the length requested. The supports consist of extremely reliable and hard-wearing separately-flushed friction bearings guaranteeing long life and low maintenance costs. Technical specifications Materials PP / PVDF Flow rate max 100 m 3 /h Head Electric motors Temperature range Allowable pressure rating Viscosity Allowable solids max 64 m from 1.1 kw to 18.5 kw from -10 C to 50 C (PVDF) max 10 bar max 400 cst Max. concentration 5% by weight, max. hardness 800 Vk, max. particle size 500 µm 34

35 Q=100 m 3 /h - H=64 m kw PP - PVDF plastic Dimensions CVN series for motor size for motor size for motor size Performance (m) Head Capacity (m /h) info@cdrpompe.com 35

36 CDR pumps are distributed in more than 30 countries all over the world. For up-to-date information, please visit our website R grafi ca e stampa: imaginaria C.D.R. Pompe S.p.A. via Togliatti, 26/A Senago (Mi) tel fax info@cdrpompe.it C.D.R. Pompe Rome Offi ce via S.Quiriaco 1/B Roma tel./fax C.D.R. Pompe Vicenza Offi ce Contrà S.S. Apostoli, Vicenza tel./fax All information contained herein is based on data available at time of publication. CDR reserves the right to implement changes without prior notice. CDR-GEN EN

Industrial-process. centrifugal pumps. general brochure.

Industrial-process. centrifugal pumps. general brochure. R Industrial-process centrifugal pumps general brochure www.cdrpompe.com Fields of use CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s with the manufacture