PRESSURE REDUCING VALVE DIRECT ACTING PRV 25/2 S Forged steel body. Saturated steam, compressed air and other gases compatible with the construction.
|
|
|
- Charlotte Pitts
- 5 years ago
- Views:
Transcription
1 PRESSURE REDUCING VALVE DIRECT ACTING PRV / S Forged steel body DESCRIPTION The PRV/S series direct acting pressure reducing valves are designed for use on steam, compressed air and other gases. They are suitable for reducing steam pressure at the point of use on laundry machines, dyeing, food industries, sterilizers, etc. Connections are female screwed or flanged. MAIN FEATURES Compact design. Bellows specially designed for high durability. Built-in strainer. OPTIONS: USE: AVAILABLE MODELS: RECOMMENDED APPLICATIONS : SIZES: CONNECTIONS: INSTALLATION: Regulating screw with top cap. Saturated steam, compressed air and other gases compatible with the construction. PRV/S metal to metal seating PRV/SG soft valve PRW/S soft valve balanced PRV/S steam and compressed air PRV/SG steam and compressed air where tight off is required PRW/S water, compressed air ½, ¾, 1 ; DN1, DN0 and DN. Female screwed ISO7/1Rp(BS 1). Flanged EN PN0 or ANSI. Horizontal installation. An Y strainer should be provided upstream the valve. See IMI, installation and maintenance instructions. CE MARKING (PED - European Directive 97//EC) PN Category DN 1 to SEP - art., paragraph VALSTEAM IS PR. E 07.07
2 LIMITING CONDITIONS PRV/S PRV/SG PRW/S Body design conditions Max.upstream pressure Max.downstream pressure Min.downstream pressure Max.design temperature Max.cold hydraulic test Max.reducing ratio PN PN PN 17 bar 17 bar 1 bar 8, bar 8, bar 8, bar 0,1 bar 0,1 bar 0, bar 10ºC 180ºC 7ºC 8 bar 8 bar 8 bar 10:1 10:1 10:1 CAPACITIES (See selection table) Valve Size 1 0 KVs 1,7,,1 DIMENSIONS (mm)-screwed EN109-1 Flanges SIZE DN A B C F WGT. Kgs D E WGT. Kgs 1/" ,7 10 7,, /" ,7 10,,8 1" ,, VALSTEAM IS PR. E 07.07
3 VALSTEAM IS PR. E 07.07
4 STEAM CAPACITY TABLE (Kg/h) COMPRESSED AIR CAPACITY TABLE ( Nm/h-0ºC-1,01bar ) WATER CAPACITY TABLE (m/h) INLET bar OUTLET bar SAT. STEAM INLET OUTLET COMPRESSED AIR D.P. WATER DN1 DN0 DN bar bar DN1 DN0 DN bar DN1 DN0 DN 0, 0, 7 8 1, , , , , , , , , , , 70 8, , , , , 18 19, , , , , , , , , 1 77, , , , , , ,9 1 81, 1 0, , , , , , , , , 9 8 1, , , , , , , , , , , , ,,1,18,8,,7,8,9,,7,,,,8,8,9,1, 7, 8,8 7, 8,7 1,8 9 10,7 VALSTEAM IS PR. E 07.07
5 PRESSURE REDUCING VALVE DIRECT ACTING PRVI Stainless steel (CF8M) DESCRIPTION The PRVI series direct acting pressure reducing valves are designed for use on steam, compressed air and other gases. They are suitable for reducing steam pressure at the point of use on laundry machines, dyeing, food industries, sterilizers, etc. Connections are female screwed or flanged. MAIN FEATURES Compact design. Bellows specially designed for high durability. Built-in strainer. OPTIONS: USE: AVAILABLE MODELS: RECOMMENDED APPLICATIONS : SIZES: CONNECTIONS: INSTALLATION: Regulating screw with top cap. Saturated steam, compressed air and other gases compatible with the construction. PRV I metal to metal seating PRVIG soft valve PRWI soft valve balanced PRVI steam and compressed air PRVIG steam and compressed air where tight off is required PRWI water, compressed air ½, ¾, 1 ; DN1, DN 0 and DN. Female screwed ISO7/1Rp(BS 1). Flanged EN PN0 or ANSI. Horizontal installation. An Y strainer should be provided upstream the valve. See IMI, installation and maintenance instructions. CE MARKING (PED - European Directive 97//EC) PN Category DN 1 to SEP - art., paragraph VALSTEAM IS PR.0 E 08.07
6 LIMITING CONDITIONS PRVI PRVIG PRWI Body design conditions Max.upstream pressure Max.downstream pressure Min.downstream pressure Max.design temperature Max.cold hydraulic test Max.reducing ratio PN PN PN 17 bar 17 bar 1 bar 8, bar 8, bar 8, bar 0,1 bar 0,1 bar 0, bar 10ºC 180ºC 7ºC 8 bar 8 bar 8 bar 10:1 10:1 10:1 CAPACITIES (See selection table) Valve Size 1 0 KVs 1,7,,1 PRESSURE RANGES Spring colour Blue * Yellow ** Green Red Red.Press. bar 0, - 1,7 0,1-1,7 1, -,0, - 8, *Applicable only on the PRW ; ** Appl.only on the PRV Where control spring ranges overlap,always use the lower range to give better control and precision. DIMENSIONS (mm)-screwed EN109-1 Flanges SIZE DN A WGT. B C F D Kgs E WGT. Kgs 1/" 9 8, ,, /" 9 8, , 1" 9 8, 17 7,9 10 7,, VALSTEAM IS PR.0 E 08.07
7 MATERIALS POS. DESIGNATION MATERIAL 1 VALVE BODY CF8M / 1.08 COVER CF8M / 1.08 *SEAT AISI 1 / 1.01 *GASKET COPPER *VALVE HARDENED ST.STEEL.1 *O-RING NBR. *VALVE HEAD NBR. *VALVE HEAD PTFE/GRAPHITE *VALVE RETURN SPRING AISI 0 / *STRAINER SCREEN AISI 0 / PUSHROD AISI 1 / BOTTOM CAP CF8M / *CAP GASKET ST.ST./ GRAPHITE 11 COVER BOLTS STAINLESS STEEL 1 *GUIDE BUSH AISI 1 / *BELLOWS AISI 1 TI / *BELLOWS GASKET ST.ST./ GRAPHITE 1 *ADJUSTMENT SPRING STEEL 17 TOP SPRING PLATE BRASS 18 ADJUSTMENT SCREW AISI 0 / LOCKNUT AISI 0 / HANDWHEEL PLASTIC 1 SPRING IDENT.PLATE ALUMINIUM * Available spare parts. VALSTEAM IS PR.0 E 08.07
8 STEAM CAPACITY TABLE (Kg/h) COMPRESSED AIR CAPACITY TABLE ( Nm/h-0ºC-1,01bar ) WATER CAPACITY TABLE (m/h) INLET bar OUTLET SAT. STEAM INLET OUTLET COMPRESSED AIR D.P. WATER bar DN1 DN0 DN bar bar DN1 DN0 DN bar DN1 DN0 DN 1, , , , , , , 1,,, ,,, 0, , 0, 0, 0, 0, , 0, 0, 0, 1, , 8 1,1,,9,,8,1,8,8,18,7,,,8, 7, 9,8,8,7,,9 7, 8,7 10, , , , 1 77, , , , , , ,9 1 81, 1 0, , , , , , , , , 9 8 1, , , , , , , , , , , , VALSTEAM IS PR.0 E 08.07
9 PRESSURE REDUCING VALVE DIRECT ACTING PRV/SS Stainless steel (barstock) DESCRIPTION The PRV/SS series direct acting pressure reducing valves are designed for use on steam, compressed air and other gases. They are suitable for reducing steam pressure at the point of use on laundry machines, dyeing, food industries, sterilizers, etc. Connections are female screwed or flanged. MAIN FEATURES Compact design. Bellows specially designed for high durability. Built-in strainer. OPTIONS: USE: AVAILABLE MODELS: RECOMMENDED APPLICATIONS : SIZES: CONNECTIONS: INSTALLATION: Regulating screw with top cap. Saturated steam, compressed air and other gases compatible with the construction. PRV/SS metal to metal seating PRV/SSG soft valve PRW/SS soft valve balanced PRV/SS steam and compressed air PRV/SSG steam and compressed air where tight off is required PRW/SS water, compressed air ½, ¾, 1 ; DN1, DN 0 and DN. Female screwed ISO7/1Rp(BS 1). Flanged EN PN0 or ANSI. Horizontal installation. An Y strainer should be provided upstream the valve. See IMI, installation and maintenance instructions. CE MARKING (PED - European Directive 97//EC) PN Category DN 1 to SEP - art., paragraph VALSTEAM IS PR.70 E 08.07
10 LIMITING CONDITIONS PRV/SS PRV/SSG PRW/SS Body design conditions Max.upstream pressure Max.downstream pressure Min.downstream pressure Max.design temperature Max.cold hydraulic test Max.reducing ratio PN PN PN 17 bar 17 bar 1 bar 8, bar 8, bar 8, bar 0,1 bar 0,1 bar 0, bar 10ºC 180ºC 7ºC 8 bar 8 bar 8 bar 10:1 10:1 10:1 CAPACITIES (See selection table) Valve Size 1 0 KVs 1,7,,1 Pmax. 17 bar Tmax. 10 ºC Vol. 0.0L Reg. VALSTEAM ENGINEERING, S.A. PORTUGAL PRESSURE RANGES Spring colour Blue * Yellow ** Green Red Red.Press. bar 0, - 1,7 0,1-1,7 1, -,0, - 8, *Applicable only on the PRW ; ** Appl.only on the PRV Where control spring ranges overlap,always use the lower range to give better control and precision. DIMENSIONS (mm)-screwed EN109-1 Flanges SIZE DN A WGT. B C D Kgs E WGT. Kgs 1/" , 10 7,, /" , 10,, 1" ,7 10 7, VALSTEAM IS PR.70 E 08.07
11 MATERIALS POS. DESIGNATION MATERIAL 1 VALVE BODY AISI 1 / 1.01 COVER AISI 1 / 1.01 SEAT AISI 1 (INTEGRAL) - - *VALVE HARDENED ST.STEEL.1 *O-RING NBR. VALVE HEAD NBR. *VALVE HEAD PTFE/GRAPHITE *VALVE RETURN SPRING AISI 0 / *STRAINER SCREEN AISI 0 / PUSHROD AISI 1 / BOTTOM CAP CF8M / *CAP GASKET PTFE *GUIDE BUSH AISI 1 / *STOP RING AISI 0 / *BELLOWS AISI 1 TI / *BELLOWS GASKET ST.ST./ GRAPHITE 1 *ADJUSTMENT SPRING STEEL 17 TOP SPRING PLATE BRASS 18 ADJUSTMENT SCREW AISI 0 / LOCKNUT AISI 0 / HANDWHEEL PLASTIC 1 SPRING IDENT.PLATE ALUMINIUM * Available spare parts. VALSTEAM IS PR.70 E 08.07
12 STEAM CAPACITY TABLE (Kg/h) COMPRESSED AIR CAPACITY TABLE ( Nm/h-0ºC-1,01bar ) WATER CAPACITY TABLE (m/h) INLET bar OUTLET SAT. STEAM INLET OUTLET COMPRESSED AIR D.P. WATER bar DN1 DN0 DN bar bar DN1 DN0 DN bar DN1 DN0 DN 1, , , , , , , 1,,, ,,, 0, , 0, 0, 0, 0, , 0, 0, 0, 1, , 8 1,1,,9,,8,1,8,8,18,7,,,8, 7, 9,8,8,7,,9 7, 8,7 10, , , , 1 77, , , , , , ,9 1 81, 1 0, , , , , , , , , 9 8 1, , , , , , , , , , , , VALSTEAM IS PR.70 E 08.07
Pressure Reducing Valve - PRV 25/2SG. Pressure Reducing Valve - PRV 25 IG
Pressure Reducing Valve - PRV 25/2SG Direct Acting, Forged Steel Body with Soft Seat for Steam upto 180 C The ADCA PRV25/2S series direct acting pressure reducing valves are designed for use on steam,
PILOT OPERATED PRESSURE REDUCING VALVES PRV47/2 DN65 DN100
PILOT OPERATED PRESSURE REDUCING VALVES PRV47/2 DN65 DN100 DESCRIPTION The PRV47/2 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases compatible
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel)
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel) DESCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series)
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series) DESCRIPTION The PV403 control valves are three-way valves for mixing or diverting service. The
DIAPHRAGM SENSING PRESSURE REDUCING VALVE P 7 DN ¼ 3/8
DIPHRGM SNSING PRSSUR RDUING VLV P 7 DN ¼ /8 DSRIPTION The P7 series direct acting, spring-loaded diaphragm sensing, pressure reducing valves, are designed for use on steam and compressed air and other
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) DN65 DN80
PORTUGAL abcde PILOT OPRATD PRSSUR RDUCING VALVS PRV47 (Steel) DN65 DN80 DSCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Special Kv available. Classification according pressure equipment Directive, 2014/68/UE
SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
DP163, DP163G and DP163Y Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Page 1 of 7 TI-P107-01 CH Issue 10 Cert. No. LRQ 0963008 ISO 9001 Pilot Operated Pressure Reducing Valves with Stainless Steel odies Description The pilot operated pressure reducing valves have been manufactured
DP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
Page 1 of 7 TI-P006-01 CH Issue 11 ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The pilot operated pressure reducing valves have been manufactured
ADCATROL INTERMITTENT BLOWDOWN VALVES VPA 26 (Fabricated steel)
TROL INTERMITTENT BLOWDOWN VLVES VP 26 (Fabricated steel) DESCRIPTION The VP26 blowdown valve was specially designed for application on steam boilers removing the concentrations of solids avoiding boiler
ADCATROL PNEUMATIC CONTROL VALVES PV16 ON-OFF (V16 globe valves series with linear actuators PA series)
TROL PNEUMTIC CONTROL VLVES PV16 ON-OFF (V16 globe valves series with linear actuators P series) DESCRIPTION The PV16G ON-Off valves are single seated, two-way body constructed with in-line straight connections.
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
SVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
DP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
TI-P006-01 CH Issue 8 DP143, DP143G and DP143H ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The DP143, DP143G and DP143H pilot operated pressure
Pilot Operated Pressure Surplussing Valve with Cast Steel Body
Page 1 of 7 TI-P004-01 CH Issue 6 SDP143 ISO 9001 Pilot Operated Pressure Surplussing Valve with Cast Steel Body Cert. No. LRQ 0963008 Description The SDP143 is a cast steel pilot operated pressure surplussing
ADCATROL Pneumatic Control Valves PV25G (V25G globe valves series with linear actuators PA series)
ADCATROL Pneumatic Control Valves PV25G (V25G globe valves series with linear actuators PA series) DESCRIPTION The PV25G control valves are single seated, two-way body constructed with in-line straight
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
Model 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300#
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
m-csg Ultra-compact Clean Steam Generation System
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
SDP143 Pilot Operated Pressure Surplussing Valve with Cast Steel Body
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1
USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 CONTROL VALVE MODEL C1 - Operation and Installation - 1 - manual C1-13B-ENG.doc JANUARY 2014 INDEX PAGE 1 IDENTIFICATION PLATE
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
G4 Series. ...Extremely sensitive and accurate PILOT OPERATED PRESSURE REDUCING VALVES PRESSURE EQUIPMENT DIRECTIVE (PED) Adjusting Screw
G4 Series PILOT OPERATED PRESSURE REDUCING VALVES...Extremely sensitive and accurate The G4 pressure reducing valve is designed for use on steam, air and gases. It will maintain a constant outlet pressure
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanged R.F. PN25/40-29 C + 425 C Max Pressure : 40 Bars Specifications : Stainless steel removable filter Bolted
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Spring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
PRESSURE REDUCING VALVES
14.01 Part No. 536 536 WRAS APPROVED BRASS BODY WITH BSP THREADED CONNECTIONS SUITABLE FOR WATER & AIR The 536 pressure reducing valve is a economical and reliable solution for water and air applications.
Type 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
S-GATE type KNIFE VALVE with PNEUMATIC ACTUATOR. DN 450 to 600. See below. 5 bar min. / 7 bar max. Prohibited use on gases of group 1 for DN>100
CHARACTERISTICS The S-GATE knife valve is equipped with a pneumatic actuator and is dedicated to the automatic shut-off of loaded fluids such as slurries and powdery materials. The standard application
Type 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
STEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
XV en /5 XV Knife gate valve DN
-80-800-en-04 1/5 The Stafsjö knife gate valve is a compact bi-directional valve with full bore. The valve is specially designed with regard to good flow characteristics and simple maintenance which makes
SV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
Technical specification. Application NAF ProCap is a batch digester capping valve for chips filling in a safe and time saving way. NAF Control Valves
NAF ProCap Capping valve DN00-70, ANSI -0 PN6, ANSI Class 0 Fk.(0)GB 0.7 Primary characteristics NAF ProCap, Capping valve for automated filling of wood chips to the batch digester in Pulp industries.
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
Excess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
Palanca manual Lifting device. Obturador o-ring Disc o-ring 28 Soft seat Viton / PTFE Metal. Inlet Outlet Orifice Area A B C Weight
Model 1216F TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation EN-4126-1 / 7 Connections Threaded BSP / NPT Design EN-12516-1, EN-4126-1 / 7 Rating PN-40 DIN 259 and
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
Angle Seated Valves. ecoflo-as. Angle Seated Valves
Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
SECTION Sanitary - Clean Steam Applications
SECTION Sanitary - Clean Steam ARMSTRONG PRODUCT CATALOGUE 321 Steam Traps TC Series Clean Steam Thermostatic Traps For Clean Steam Systems For Pressures to 12 psig (8 bar) Capacities to 3,775 lb/hr (1,712
Si 2323 / Si 2324 / Si 2325
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si 2323 / Si 2324 / Si 2325 Features Straightforward design for high pressures The regular flow safety
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 300 Flanged R.F. PN25/40-29 C + 425 C Max Pressure : 40 Bars Specifications : Stainless steel removable filter Bolted bonnet
ARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators
ARI-STEVI 8 / 9 (DN5-00) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 Pneumatic actuator ARI-DP 30-3 Reversible pneumatic actuator Actuator
API CATALOG. Flanged Safety Relief Valves Series 526. The-Safety-Valve.com
API Flanged Safety Relief Valves Series 526 CATALOG The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application API High Performance Series 526 Type 526 Compact Performance
Type 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Pressure reducing valves
Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for
ARI-STEVI ANSI (NPS 1/2" - 2") with electric and pneumatic actuators Control valve in straightway form
with electric and pneumatic actuators Control valve in straightway form ARI-STEVI 440 - ANSI Pneumatic actuator ARI-DP 32-33 Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
1 body / (DN15-DN20) J / (DN25-DN50) J / (DN65-DN80) K
Type: Description: standard safety valve angular shape metal sealing spring-loaded enlarged outlet flanges acc. to EN1092-1 or ANSI: inlet: PN16-PN63 outlet: PN16-PN40 cone liftable with gas-tight cap
Valves for general purpose & industry
Valves for general purpose & industry Carbon steel & stainless steel ball valves 1 piece body... page 14 2 piece body... page 14 2 piece body - High temperature... page 14 2 piece construction - 3 way...
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
Forged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4
Thermodynamic steam traps TRACO CONA TD Thermodynamic steam trap PN40 - with flanges (BR 640/641...1) - with screwed sockets (BR 640/641...2) - with socket weld ends (BR 640/641...3) - with butt weld ends
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating
ABV21i and ABV40i Air Actuated Boiler Blowdown Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Modulate CATALOG. Action. Safety Relief Valves Series 433. The-Safety-Valve.com
Modulate Action Safety Relief Valves Series 433 CATALOG The-Safety-Valve.com Valve finder General How to find the right Product Group High operating to set pressure ratio, high backpressure or low total
ARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
ARI-STEVI 470 / ANSI (DN25-200)
ARI-STEVI 470 / 471 - ANSI (DN25-200) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem With pneumatic and electric actuators ARI-STEVI 470 / 471 - ANSI
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
ARI-STEVI 470 / ANSI (DN25-200)
With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended